Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | V | W | Y | Z
Number of items at this level: 787.

A

AARON ENTIGAL, JEREMAIAH (2022) Semi-Centralized Energy Trading System in Standalone Solar PV system. [Final Year Project Report] (Unpublished)

AIZATUL FARZANA, SALIM CONDITION MONITORING OF ADDITIVE MANUFACTURING PROCESS USING SENSOR TECHNOLOGY. [Final Year Project Report] (Unpublished)

ANASTASIA MICHELLE, JAJAH (2022) Evaluation of Physical and Mechanical Properties for Hydrogel Wound Dressing Made of Commercial Aloe Vera and Sea Cucumber Gel. Masters thesis, University Malaysia Sarawak.

AZRUL, ABDULLAH (2018) CFD SIMULATION OF THERMAL ACCUMULATION AND DISTRIBUTION IN AN ENCLOSED VEHICLE (A-SEGMENT). [Final Year Project Report] (Unpublished)

Aaliyawani E., Sinin and Sinin, Hamdan and Khairul Anwar, Mohamad Said and Marini, Sawawi and Gladys Tan, Jia Jia and Mohammad Jasni, Hipni (2024) The Sarawak ‘Tar’ for Hadrah Performance. BioResources, 19 (3). pp. 5288-5299. ISSN 1930-2126

Abang Mohamad, Aizuddin and N. A. A., Jalil (2022) A Review of Wearable Sensor Systems for Hand Transmitted Vibration (HTV) Applications. AIP Conference Proceedings, 2545 (1). pp. 1-9. ISSN 1551-7616

Abang Mohamad Harith, Abang Beniamin and Noor Hisyam, Noor Mohamed and Mahsuri, Yusof (2023) The Effect of Graphene Nanoplatelets Content on the Hardness of Mg6%Zn0.2%Mn Composites. Pertanika Journal of Science & Technology, 31 (3). pp. 1493-1502. ISSN 0128-7680

Abang Mohamad Harith, Beniamin (2023) Investigation on Hardness and Corrosion Properties of Graphene Nanoplatelets Reinforced Magnesium Composite. Masters thesis, Universiti Malaysia Sarawak.

Abang Mohd Arif Anaqi, Abang Isa (2017) Real time remote monitoring system for cardiac disease patient. [Final Year Project Report] (Unpublished)

Abdul Azim, Hamdan. (2009) Physico-mechanical properties of polyethylene reinforced with oil palm fiber composites. [Final Year Project Report] (Unpublished)

Abdul Fattah, Haji Osman. (1998) Development of frame analysis program by finite element method (FEM). [Final Year Project Report] (Unpublished)

Abdul Hafidz, Haji Johari (2005) Student mentoring system (SMS). [Final Year Project Report] (Unpublished)

Abdul Hafiz, Ab Majid and Hamady, Dieng and Salbiah, Ellias and Faezah Syukriah, Sabtu and Abd Hafis, Abd Rahim and Satho, Tomomitsu (2018) Olfactory behavior and response of household ants (Hymenoptera) to different types of coffee odor: A coffee-based bait development prospect. Journal of Asia-Pacific Entomology, 21 (1). pp. 46-51. ISSN 12268615

Abdul Halem, Serojai. (2001) Comparison between bluetooth technology and IrDA. [Final Year Project Report] (Unpublished)

Abdul Mutalib Faisal, Lampong (2005) Crack detection in welded joint. [Final Year Project Report] (Unpublished)

Abdul Nazrin, Bin Abdul Rahman (2017) Production of biogas with organic waste (food waste). [Final Year Project Report] (Unpublished)

Abdul Qayoom, Jakhrani (2013) Performance Modeling And Size Optimization Of A Standalone Photovoltaic System. PhD thesis, University Malaysia Sarawak.

Abdul Qayoom, Jakhrani and Othman, A.K. and Andrew Ragai, Henry Rigit and Saleem, Raza Samo and Shakeel Ahmed, Kamboh (2013) Sensitivity Analysis of a Standalone Photovoltaic System Model Parameters. Journal of Applied Sciences, 13 (2). pp. 220-231. ISSN 1812-5654

Abdul Rahman, B. Hj. Abdillah (1999) A complex variable boundary element method for two-dimensional thermal analysis in anisotropic solids. [Final Year Project Report] (Unpublished)

Abdullah, M.O and Yek, P.N.Y and Hamdan, S. and Junaidi, E. and Kuek, P. (2010) An Airboat For Rural Riverine Transportation and Mangrove Marine Environment Applications. International Journal of Recent Research and Applied Studies, 2 (3). pp. 211-222. ISSN 2076-7366

Abdussalam Khan Bin, Mustafa Khan (2023) Study of Coconut Biodiesel Transesterification Optimum Parameters to Investigate Diesel Engine Performance with Exhaust Gas Emission Analysis. Masters thesis, Universiti Malaysia Sarawak.

Abel, Alfeuz and Fadzlita, Tamiri and Farm, Yan Yan and Wan Khairul, Muzammil and Melvin Gan, Jet Hong and Dayang Salyani, Abang Mahmod and Nuramalina, Bohari and Mohd Azlan, Ismail (2024) Performance Analysis of a Crossflow Vortex Turbine for a Gravitational Water Vortex Power Plant. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 116 (2). pp. 13-26. ISSN 2289-7879

Abu Saleh, Ahmed and Ismail, S. and Rahman, R. and Sinin, Hamdan (2014) Experimental Investigation Of Castor Oil As An Alternative Fuel For Biodiesel. In: International Engineering Conference, Energy and Environment (ENCON 2014).

Abu Saleh, Ahmed and M.A., Alam and A., Piee and M.R., Rahman and S., Hamdan (2010) Study of physical and mechanical properties of oil palm empty fruit bunch fiber reinforced polypropylene composites. Journal of Energy & Environment, 2 (1). pp. 16-21. ISSN 0958305X

Abu Saleh, Ahmed and Md. Saiful, Islam and Azman, Hassan and M. K. Mohamad, Haafiz and Kh., Nurul Islam and Reza, Arjmandi (2014) Impact of Succinic Anhydride on the Properties of Jute Fiber/Polypropylene Biocomposites. Fibers and Polymers, 15 (2). pp. 307-314. ISSN 1875-0052

Adam Hussary, Ahmad (2009) Thermal conductivity of lightweight concrete with admixtures. [Final Year Project Report] (Unpublished)

Adeniyi, Adedayo Sherif and Amir Azam, Khan and Bilal, Anjum Ahmed and Abbas, Saeed Hakeem and Faheemuddin, Patel and Akolad, Idris Bakare and Anwar, Ul-Hamid and Muhammad Ali, Ehsan and Tahir, Irfan Khan (2019) The Property Characterization of α-Sialon/Ni Composites Synthesized by Spark Plasma Sintering. Nanomaterials, 9 (12). pp. 1-12. ISSN 2079-4991

Adi Afifi, Bin Abdul Aziz (2017) Acoustical, mechanical and anatomical properties of sindora sp. (sepetir) and the effects of impregnated wood polymer. [Final Year Project Report] (Unpublished)

Adnan, Shahid Khan and N., Fisal and N.N.M.I., Ma’arof and Fath.E.I., Khalifa and M., Abbas and Hashim, E. A. Elshafie (2010) Security Zone and Key Derivation Management in Centralized Security Control in Wimax Multihop Relay System. In: 3rd International Graduate Conference on Engineering, Science and Humanities (IGCESH), 2– 4 November 2010, School of Graduate Studies Universiti Teknologi Malaysia.

Adzlan, A. and Tsutsumi, S. and Gotoda, H. (2015) Near-field behavior of variable property jet with swirling flow generated by a change in gravitational orientation. Physics of Fluids, 27 (2). ISSN 1070-6631

Afrasyab, Khan and Khairuddin, Sanaullah and Andrew Regai, Henry Rigit and Mohammed, Zwawie and Mohammed, Algarnie and Bassem F., Felemban and Ali, Bahadar (2022) Experimental investigations on the effect of the spiral helical fins & flow channel routing inside flowing water stream on the heat exchanger performance in tropical environment. Australian Journal of Mechanical Engineering, 20 (4). pp. 1008-1019. ISSN 1448-4846

Afrasyab, Khan and Khairuddin, Sanaullah and Konstantinovich, Spiridonov Evgeny and Fedorovna, Khabarova Darya and Rigit, Andrew Ragai Henry and Ullah, Atta (2021) A study of the hydrodynamics of steam-assisted coal particles removal. International Journal of Energy and Environmental Engineering, 12 (1). ISSN 2251-6832

Ahmad Adzlan, Fadzli Khairi and Mohamed Sukri, Mat Ali (2018) OpenFOAM Implementation for The Study of Streamwise Vortex-Induced Vibration-Based Energy Harvester for Sensor Networks. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 48 (2). pp. 165-175. ISSN 2289-7879

Ahmad Adzlan Fadzli, Khairi and Abdullah, Yassin and Abang Mohammad Nizam, Abang Kamaruddin and Mohamed Sukri, Mat Ali (2023) Numerical Simulation of Drying Process within a Novel Rotary Drying Machine for Palm Oil Sludge. Journal of Advanced Research in Applied Mechanics, 103 (1). pp. 33-42. ISSN 2829-7895

Ahmad Beng Hong, Kueh and Isabel Lim, Fong (2023) Tensegrity prediction of E. coli deactivation by sonication strategy. In: International Conference on Applied Science, Engineering, and Advanced Technology (EAW-ICASEAT2023), 24/12/2023, Bayview Beach Resort, Batu Ferringhi, Penang, Malaysia.

Ahmad Faizal, B. Zaharuddin (2009) Application of axiomatic design concept on improving ladder for pepper harvesting. [Final Year Project Report] (Unpublished)

Ahmad Kueh, Beng Hong (2023) Sonication frequency of E. coli inactivation employing tensegrity approach. In: The International Conference on Mathematical Methods and Models in Biosciences (ICMMMB-23), 29/05/2023, Tokyo, Japan.

Ahmad Shahir, Jamaluddin and Abdullah, Yassin (2013) Analysis of Laser Sintered Materials Using Finite Element Method. Sains Malaysiana, 42 (12). pp. 1727-1733. ISSN 0126-6039

Ahmed Mohamed, Ahmed Haidar and Adila, Fakhar and Andreas, Helwig (2020) Sustainable energy planning for cost minimization of autonomous hybrid microgrid using combined multi-objective optimization algorithm. Sustainable Cities and Society, 62. pp. 1-20.

Aina Atika, Binti Azman (2017) Characterization of rice husk as usded in conversion of zeolite beta with the effect of time and temperature variations. [Final Year Project Report] (Unpublished)

Akmal Hisyam, Bin Ruduan @ Raduan. (2010) Sustainable Utilisation of Metroxylon Sago Plantation Biomass Wastes as Binding Agent for Pelletisation. [Final Year Project Report] (Unpublished)

Al Maalik Faizal, Shaik Anwar Raja (2018) 2-In-1 Multipurpose Tool For Agricultural Use. [Final Year Project Report] (Unpublished)

Albern, Anak Tomek (2010) Feasibility study of sustainable pellet - gasification - power generation in Sarawak rural areas. [Final Year Project Report] (Unpublished)

Alexander, Gotte (2008) Conceptual design of a semi autonomous mobile robot for pepper plantation. [Final Year Project Report] (Unpublished)

Alexander Elvin, Anak Lee (2017) Design of economic walet bird nest harvester. [Final Year Project Report] (Unpublished)

Alick Davidson, Elciana (2020) DEVELOPMENT OF WATER FILTRATION SYSTEM CONFIGURATION FOR RURAL SCHOOL IN SARAWAK. [Final Year Project Report] (Unpublished)

Alif Falatin, Bin Abdul Latif (2017) Fish dorsal inspired skew turning vanes for HVAC system. [Final Year Project Report] (Unpublished)

Aliff, Rahman and Shahrol, Mohamaddan (2016) Simple Arm Muscle Model for Oil Palm Harvesting Process. MATEC Web of Conferences, 87. pp. 1-4. ISSN 2261236X

Aluyah, Sipi (2006) Design and finite element analysis of solid expandable tubular. [Final Year Project Report] (Unpublished)

Alya Norshahida, Mohammad Mustaffa (2018) Parametric Study Of Sintering Of Ceramic Pellet Using Sarawak Soils. [Final Year Project Report] (Unpublished)

Amiera Aqilah, M. Rosnani and Muhamad Sukri, Hadi and Annisa, Jamali and Intan Zaurah, Mat Darus and Hanim, Mohd Yatim and Mat Hussin, Ab Talib (2023) Hub Angle Control of Double Link Flexible Robotic Arm Manipulator Using PID Controller Tuned by Bacterial Foraging Optimization Algorithm. In: 2023 13th International Conference on Power, Energy and Electrical Engineering (CPEEE), 25-27 February 2023, Tokyo, Japan.

Amir Azam, Khan and Bong, David B L and Andrew Ragai, Henry Rigit and Lim, Soh Fong and Al-Khalid, Othman (2018) Corrosion Study of Galvanized Ultra High Strength Steel Reinforced Overhead Transmission Conductors. International Journal of Engineering & Technology, 7 (3.18). pp. 83-86. ISSN 2227524X

Amir Azam, Khan and Labbé, Jean Claude (2014) Surface engineering glass-metal coatings designed for induction heating of ceramic components. IOP Conference Series: Materials Science and Engineering, 60 (01201). pp. 1-9. ISSN 1757-899X

Amir Azam, Khan and Magdalene, Anak Andrew Munot and Shirley, Anak Johnathan Tanjong and Rudiyanto, Bin Philman Jong and Hishammudin Afifi, Bin Huspi (2018) Gearing Towards a Greener Future. UNIMAS Publisher, Kota Samarahan, Sarawak. ISBN 9789672008552

Amirah Mazlin, Binti Abu Bakar (2017) CATIA modelling analysis for forehand stroke and lunge of badminton player. [Final Year Project Report] (Unpublished)

Ana Sakura, Zainal Abidin and Annisa, Jamali and W., K. Tan and Andrew Ragai Henry, Rigit and J., S. Chong and M. A., Kiprawi and Johnapi, P. R. (2014) Development of a prototype model for fully automated Sarawak layered cake machine. In: 5th Brunei International Conference on Engineering and Technology (BICET 2014), 1-3 Nov. 2014, Bandar Seri Begawan, Brunei.

Ana Sakura, Zainal Abidin and Hasmida, Hamza and Mohd Zulhatta, Kifli and Rasli, Muslimen and Mohd Danial, Ibrahim and Raudhah, Ahmadi and Mohd Shahrizal, Abdul Razak and May, Raksmey and Annisa, Jamali (2022) DEVELOPMENT OF FRUGAL WAVE SIMULATOR FOR COASTAL EROSION STUDY. PERINTIS eJournal, 12 (2). pp. 69-80. ISSN 2232-0725

Ana Sakura, Zainal Abidin and Melissa Michelle, Rolland and Sinin, Hamdan and Rasli, Muslimen and Shirley, Jonathan Tanjong and Raudhah, Ahmadi and Shahrol, Mohamaddan and Annisa, Jamali (2023) Pre-Treatments Effect on Pepper Drying Time and Microstructure. AIP Conference Proceedings, 2643 (1). pp. 1-9. ISSN 1551-7616

Ana Sakura, Zainal Abidin and Mohamad Syafiq Iylia, Jamadi and Nur Dzakirah, Bahri and Mohammad Omar, Abdullah and Annisa, Jamali and Sinin, Hamdan and Rasli, Muslimen and Zehnder, J.A.M. (2024) Application of IR Radiation in White Pepper Drying : A preliminary study. In: Proceedings of Ninth International Congress on Information and Communication Technology (ICICT 2024), 19-22 February 2024, London, United Kingdom.

Ana Sakura, Zainal Abidin and Mohamad Syafiq Iylia, Jamadi and Sinin, Hamdan and Mohammad Omar, Abdullah and Gloria Elaine, John and Annisa, Jamali and Rasli, Muslimen and Zehnder Jarroop, Augustine Mercer (2024) Physicochemical Characterisation of White Pepper : A Comparative Study Between Traditional Sun Drying and Convective Rotary Drum Drying Methods. Pertanika Journal of Tropical Agricultural Science, 47 (3). pp. 1021-1036. ISSN 1511-3701

Ana Sakura, Zainal Abidin and Mohamad Zulhatta, Kifli and Annisa, Jamali and Rasli, Muslimen and Raudhah, Ahmadi (2020) Development of Black Pepper Rotary Drum Dryer System. International Journal o f Integrated Engineering, 12 (7). pp. 11-19. ISSN 2600-7916

Ana Sakura, Zainal Abidin and Nazreen, Junaidi and Andrew Ragai Henry, Rigit and Mohamad Syazwan Zafwan, Mohamad Suffian and Mohamad Syamim, Hamsawi and Shahrol, Mohamaddan and Rasli, Muslimen and Annisa, Jamali (2018) Simultaneous Heat and Mass Transfer in Kek Lapis Sarawak Baking. In: : 2018 2nd International Conference on Smart Sensors and Application (ICSSA), 24-26 July 2018, Kuching, Malaysia.

Ana Sakura, Zainal Abidin and Nazreen, Junaidi and M. S., Hamsawi and Andrew Ragai, Henry Rigit and Mohamad Syazwan Zafwan, Mohamad Suffian and Shahrol, Mohamaddan and Rasli, Muslimen and Annisa, Jamali (2018) Comparison Study between FEM Simulation and Experimental of Heat and Mass Transfer in Kek Lapis Sarawak Baking. International Journal of Integrated Engineering, 10 (7). pp. 204-218. ISSN 2600-7916

Ana Sakura, Zainal Abidin and Rosnah, Mohd Yusuff and Rasli, Muslimen (2011) Exploratory Study: Design Capabilities Development for Malaysian Vendors in Automotive Industry. Proceedings of the 2011 International Conference on Industrial Engineering and Operations Management Kuala Lumpur, Malaysia, January 22 – 24, 2011. ISSN 978-0-9808251-0-7 (ISBN)

Ana Sakura, Zainal Abidin and Sawing, T. B. and Mohamaddan, Shahrol and Abdul Halim, Hazmi Hijazi and Annisa, Jamali and Muslimen, Rasli and Ashari, Muhd Fadzli and Jamaludin, Mohd Syahmi (2019) Energy harvesting from rotating motion of in-pipe robot cleaning device. International Journal of Automotive and Mechanical Engineering, 16 (1). pp. 6427-6436. ISSN 2229-8649

Ana Sakura, Zainal Abidin and Sim, Chia Chie and Muhammad Hamizan, Zaini and Muhammad Farhan Aiman, Mohd Pauzi and Mohammad Muaz, Sadini and Shahrol, Mohamaddan and Annisa, Jamali and Rasli, Muslimen and Muhd Fadzli, Ashari and Mohd Syahmi, Jamaludin (2017) Development of In-Pipe Robot D300: Cornering Mechanism. MATEC Web of Conferences, 87. ISSN 2261236X

Anastasia, Jajah and Mahshuri, Yusof (2021) Fluid Intake Capacity of Aloe Vera and Sea Cucumber Thin Film. Materials Science Forum (Volume 1030), 1030 (2021). pp. 35-41. ISSN 1662-9752

Andrew Ragai, Henry Rigit and Abdul Qayoom, Jakhrani and Ijen, Dakek and Ahsanullah, Soomro (2015) Flow visualization of a dielectric barrier discharge plasma actuator. NED University Journal Of Research - Applied Sciences, 12 (4). pp. 67-80. ISSN 1023-3873

Andrew Ragai, Henry Rigit and Imran, Ali and Tiaw, C Boon and Chi, Hung Chong (2020) Effect of Number of Electrodes on Electrical Performance of Surface Dielectric Barrier Discharge Plasma Actuator. In: EnCon2020, 27-28 October 2020, Kota Samarahan.

Andrew Ragai, Henry Rigit and Norman Baggio, Anak Francis (2018) Development of Preliminary Design for Tidal Power Plant at Kuching Barrage. In: International Conference of Fluid Machinery and Automation System (ICFMAS 2018), 27 - 28 October 2018, Hanoi, Vietnam.

Andrew Ragai Henry, Anak Rigit and Sanaullah, Khairuddin and A., Khan and Javid, W. and Mushtaq, M. U. (2019) Feasibility of Non-thermal Plasma Assisted Semiconductor Material Synthesis for Thermoelectric, Photovoltaic and Energy Applications. International Journal of Materials, Mechanics and Manufacturing, 7 (1). pp. 7-11. ISSN 1793-8198

Ang, W.T. and Clements, D.L. (1995) Hypersingular integral equations for multiple interacting planar cracks in an elastic layered material under antiplane shear stresses. Engineering Analysis with Boundary Elements, 16. pp. 289-295. ISSN 0955-7997

Ang, W.T. and Gumei, A.B. (1996) Multiple interacting planar cracks in an anisotropic multilayered medium under an antiplane shear stress: a hypersingular integral approach. Engineering Analysis with Boundary Elements, 18 (4). pp. 297-303. ISSN 0955-7997

Ang, W.T. and Park, Y.S. (1998) CVBEM for a system of second-order elliptic partial differential equations. Engineering Analysis with Boundary Elements, 21. pp. 179-184. ISSN 0955-7997

Ang, W.T. and Park, Y.S. (1997) Hypersingular integral equations for arbitrarily located planar cracks in an anisotropic elastic bimaterial. Engineering Analysis with Boundary Elements, 20 (2). pp. 135-143. ISSN 0955-7997

Anielson, bin Mamin (2014) Effect of biodiesel's saturation on emissions of carbon monoxide (CO) and nitrogen oxide (NOx). [Final Year Project Report] (Unpublished)

Annisa, Jamali and Ana Sakura, Zainal Abidin and Mat Darus, I.Z. and Tokhi, M.O. (2018) Controlling the non-parametric modeling of Double Link Flexible Robotic Manipulator using Hybrid PID tuned by PType ILA. International Journal of Integrated Engineering, 10 (7). pp. 219-232. ISSN 2600-7916

Annisa, Jamali and Intan Z., Mat Darus (2020) Intelligent Evolutionary Controller for Flexible Robotic Arm. Journal of Physics: Conference Series, 1500 (01202). pp. 1-15. ISSN 1742-6596

Annisa, Jamali and Intan Zaurah, Mat Darus and Hanim, Mohd Yatim and Mat Hussin, Ab Talib (2019) Optimization Of Pid Controller For Double-Link Flexible Robotic Manipulator Using Metaheuristic Algorithms. In: CLAWAR 2019: 22nd International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, 26-28 August 2019, Kuala Lumpur, Malaysia..

Annisa, Jamali and Intan Zaurah, Mat Darus and Mohammad Osman, Tokhi and Ana Sakura, Zainal Abidin (2018) Utilizing P-Type ILA in tuning Hybrid PID Controller for Double Link Flexible Robotic Manipulator. In: 2nd International Conference on Smart Sensors and Application (ICSSA), 24 - 26 July 2018, Kuching, Malaysia.

Annisa, Jamali and Intan Zaurah, Mat Darus and Shahrol, Mohamaddan and Mohammad Osman, Tokhi (2018) Implementation of PID based controller tuned by Evolutionary Algorithm for Double Link Flexible Robotic Manipulator. In: 2018 International Conference on Computational Approach in Smart Systems Design and Applications (ICASSDA), August 2018, Kuching, Malaysia.

Annisa, Jamali and Jonathan, Peter Giman (2021) Performance Analysis of IOT based Flood Monitoring Framework in Sub-urban. In: 2021 IEEE 7th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA), 23-25 Aug. 2021, Bandung, Indonesia.

Annisa, Jamali and Lidyana, Roslan and Mohamad Syazwan Zafwan, Mohamad Suffian (2022) Grey Wolf Optimization For Intelligent Parametric Modeling Of Gradient Flexible Plate Structure. Journal of Applied Science and Engineering, 26 (9). pp. 1207-1214. ISSN 2708-9975

Annisa, Jamali and Lidyana, Roslan and Muhammad Hasbollah, Hassan (2023) Implementation of Evolutionary Algorithms to Parametric Identification of Gradient Flexible Plate Structure. International Journal of Automotive and Mechanical Engineering (IJAME), 20 (3). pp. 10559-10573. ISSN 2180-1606

Annisa, Jamali and M. Raisuddin, Khan and M. Shahril, Osman and M. Mozasser, Rahman and Muhamad Fadzli, Ashari and Mohd Syahmi, Jamaludin and Ervina, Junaidi (2014) Collision Free Control of Variable Length Hyper Redundant Robot Manipulator. Applied Mechanics and Materials, 541-54. pp. 1107-1114. ISSN 1662-7482

Annisa, Jamali and Mat Darus, I. Z. and Tokhi, M. O (2020) Intelligent PID Controller of Flexible Link Manipulator with Payload. In: 2020 3rd International Conference on Mechanical, Electronics, Computer, and Industrial Technology (MECnIT), 25 - 27 June 2020, Medan, Indonesia.

Annisa, Jamali and Mat Darus, I. Z. and Tokhi, M.O. and Ana Sakura, Zainal Abidin (2018) Utilizing P-Type ILA in tuning Hybrid PID Controller for Double Link Flexible Robotic Manipulator. In: 2018 2nd International Conference on Smart Sensors and Application (ICSSA), 24-26 July 2020, Kuching, Sarawak.

Annisa, Jamali and Mat Darus, I.Z. and M. H., Hassan and Tokhi, M.O. (2018) Decentralized Intelligent PID based controller tuned by Evolutionary Algorithm for Double Link Flexible Robotic Manipulator with Experimental Validation. In: Intelligent Control and Automation Symposium,, 27 November 2018, Johor.

Annisa, Jamali and Md. Raisuddin, Khan and Mozasser, Rahman (2012) Design and Control of Variable Length Hyper Redundant Robot. Procedia Engineering, 41. pp. 1105-1113. ISSN 1877-7058

Annisa, Jamali and Mohamaddan, Shahrol and Hazmi, Helmy and Junaidi, E. and Norazian, Mohd Hamdan and Nurul Zawiyah, Mohamad (2020) Design of Stroke Rehabilitation Robots. In: 2nd International Conference on Applied Engineering (ICAE 2019), 2-3 Oct 2019, Polibatam, Batam Indonesia.

Annisa, Jamali and Mohd Syahmi, Jamaludin and Shahrol, Mohamaddan and Helmy, Hazmi (2023) Kinematic and Dynamic Model Analysis for An Improved Design of Home-Based Wearable Lower Limb Rehabilitation Robot. In: 8th Brunei International Conference on Engineering and Technology 2021, 8–10 November 2021, Bandar Seri Begawan, Brunei Darussalam.

Annisa, Jamali and Muhammad Hasbollah, Hassan and Lidyana, Roslan and Muhamad Sukri, Hadi (2023) Implementation of Evolutionary Algorithms to Parametric Identification of Gradient Flexible Plate Structure. INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, 20 (3). pp. 10559-10573. ISSN 2229-8649

Annisa, Jamali and Muhammad Sukri, Hadi and Hanim, Mohd Yatim and Mat Hussin, Ab Talib and Intan Zaurah, Mat Darus (2019) Fuzzy-Pid Based Controler For Active Vibration Control Of Nonlinear Dynamic Systems. In: CLAWAR 2019: 22nd International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, 26-28 August 2019, Kuala Lumpur, Malaysia..

Annisa, Jamali and Raisuddin, Khan and Md. Mozasser, Rahman (2011) A New Geometrical Approach to Solve Inverse kinematics of Hyper Redundant Robots with variable link length. In: 2011 4th International Conference on Mechatronics (ICOM), 17-19 May 2011, Kuala Lumpur, Malaysia.

Annisa, Jamali and Razali, N.T and Mah, D.Y.S. and Eng, L.C. and Mannan, M.A. (2020) A Wireless Based StormPAV Green Pavement Moisture Monitoring System. In: 2nd International Conference on Applied Engineering (ICAE 2019), 2-3 Oct 2019, Polibatam, Batam Indonesia.

Annisa, Jamali and Shahrol, Mohamaddan and Mohammed Najeh, Nemah and Cheng, Yee Low and Kareem, A. K. and Fakhri, O. M. (2019) A Hybrid Haptic Feedback Stimulation Prosthetic Device to Recover the Missing Sensation of Upper Extremity Amputees. TEST Engineering & Management, 81 (NovDis). pp. 649-665. ISSN 0193-4120

Annisa, Jamali and Sheldon Ijau, Winston (2022) Axis manipulation to solve Inverse Kinematics of Hyper-Redundant Robot in 3D Space. Journal of Integrated and Advanced Engineering, 2 (2). pp. 112-122. ISSN 2774-602X

Ariny, Demong and Andrew Ragai, Henry Rigit and Khairuddin, Sanaullah (2023) Effect of Swirl Gas Injection on Bubble Characteristics in a Bubble Column. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 102 (2). pp. 155-165. ISSN 2289-7879

Asrul Effendy, Ismail. (2005) Design and construction of mini wind generatior. [Final Year Project Report] (Unpublished)

Atirah Munirah, Binti Abd Aziz. (2000) Solar powered bicycle mechanism design. [Final Year Project Report] (Unpublished)

Augustus Galang, Anak Minggu (2017) Improvement of palm kernel extraction rate (KER) and palm kernel analysis. [Final Year Project Report] (Unpublished)

Awang Rahim, Bin Osman. (2008) Fundamental study on the mechanism of blood withdrawal of mosquito. [Final Year Project Report] (Unpublished)

Ayeshamariam, A. and Saravanakkumar, D. and Kashif, M. and Sivaranjani, S. and Ravikumar, B. (2016) Analysis on the effect of ZnO on Carbon nanotube by spray pyrolysis method. Mechanics of Advanced Materials and Modern Processes, 2 (3). ISSN 2198-7874

Azhaili, Baharun and Muhammad Syukri, Imran and Siti Halipah, Ibrahim and Wan Azlan, Bin Wan Zainal Abidin (2018) Night Cooled Radiant Cooling Panel for Sustainable Building Cooling Mode in Malaysia. Journal of Construction in Developing Countries, 23 (1). pp. 61-79. ISSN 1823-6499

Azmeera, Binti Shaibi (2017) The study of lemongrass fibre reinforced HDPE composites. [Final Year Project Report] (Unpublished)

Azuan, Abu Talib (2002) Health and safety risk assessment in palm oil industry. [Final Year Project Report] (Unpublished)

Azwan, Bin Mohd. Nawi (2001) Experimental study on the effect of gasoline silencer on Yanmar Industrial diesel engine model TF 90-ME. [Final Year Project Report] (Unpublished)

aiman Azrael, Shaiful Nahar Sukri and Siti Sarah Zahidah, Nazri and Muhamad Sukri, Hadi and Annisa, Jamali and Hanim, Mohd Yatim and Intan Zaurah, Mat Darus (2021) Hub Angle Control for A Single Link Flexible Manipulator Based on Cuckoo Search Algorithm. In: 2021 IEEE 7th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA), 23-25 Aug. 2021, Bandung, Indonesia.

B

Bajuri, E.N (2006) Creep of Untreated donax grandis polymer composites. [Final Year Project Report] (Unpublished)

Bakri, M.K.B. and Jayamani, E. and Heng, S.K. and Sinin, Hamdan (2015) Reinforced Oil Palm Fiber Epoxy Composites: An Investigation on Chemical Treatment of Fibers on Acoustical, Morphological, Mechanical and Spectral Properties. Materials Today: Proceedings, 2 (4-5). pp. 2747-2756. ISSN 2214-7853

Bala, Anak Gansa. (2002) The effect of spindle speed, feed rate and depth of cut on the surface finish. [Final Year Project Report] (Unpublished)

Barry Lawrence, Mengga (2018) Low Power Laser Cutting Of Cotton Fibre Laminate For Electrical Insulation At Low Voltages. [Final Year Project Report] (Unpublished)

Bashir, S. and Teo, Y.Y. and Ramesh, S. and Ramesh, K. and Khan, A.A. (2015) N-succinyl chitosan preparation, characterization, properties and biomedical applications: A state of the art review. Reviews in Chemical Engineering, 31 (6). pp. 563-597. ISSN 0167-8299

Baynard, Anakk Sawun. (2002) Study on mini-hydroelectric in Lundu district Sarawak. [Final Year Project Report] (Unpublished)

Bello, Olalekan (2016) Utility-Based Scheduling for Wireless Network using Modified Sigmoidal Function. PhD thesis, Universiti Malaysia Sarawak.

Benedict Baski, Jatim (2018) Cooling Patch From Hibiscus Rosa Sinensis Leaves Extract. [Final Year Project Report] (Unpublished)

Bernard, Maringgal and Khalina, Abdan and Aidy, Ali and Muhammad, Faizal and Siti Hasnah, Kamaruddin and Asmawi, Sanuddin (2011) The effect of processing parameters on the mechanical properties of kenaf fibre plastic composite. Materials & Design, 32 (2). pp. 1039-1043.

Bernard, Maringgal and Khalina, Abdan and Aidy, Ali and Rimfield, Janius and Muhammad, Faizal and Siti, Kamaruddin (2011) Optimization of Compression Moulding Temperature for Polypropylene Materials. Materials Testing, 53 (5). pp. 280-284. ISSN 2195-8572

Bibi Najlaa Bt., Buniamin Khan (2009) Prospect of biodiesel production from chicken by products. [Final Year Project Report] (Unpublished)

Bon, Zhi Hao and Syahiir, Kamil and Mohamad Syazwan Zafwan, Mohamad Suffian and Ahmad Kamal Ariffin, Mohd Ihsan (2024) Nonlinear Material Properties with Parameter Uncertainty for Structural Analysis. In: 3rd Virtual Conference on Computational and Experimental Mechanics, 2nd to 3rd July 2024, Online.

Bong, Benjamin Lip Jin. (2010) A cross sectional study on performance assessment on Kuching manufacturing industries : a time series analysis. [Final Year Project Report] (Unpublished)

Bong, Kuek Kong (2017) Optimization of sludge flow behavior in a mixing tank through blade design. [Final Year Project Report] (Unpublished)

Bong, Siak Hong. (2004) Application of the robust design concept to the catapult design. [Final Year Project Report] (Unpublished)

Boniface, Christopher Jantai and Miyanaga, Norifumi and Mohd Danial, Bin Ibrahim (2015) Radiant Times Series (RTS) For Equatorial Climates. In: Proceedings of the World Engineering Conference and Convention 2015, 29 November - 2 December 2015, Kyoto, Japan.

Boylan, Noel and Fauzan, Sahdi and Gaudin, Christophe and White, David J. (2014) Centrifuge modelling of active slide–pipeline loading in soft clay. Géotechnique, 64 (1). pp. 16-27. ISSN 0016-8505

Brabha, H Nagaratnam and Ahmed, Faheem and Muhammad Ekhlasur, Rahman and Mohammad, Abdul Mannan and Moussa, Leblouba (2015) Mechanical and Durability Properties of Medium Strength Self-Compacting Concrete with High-Volume Fly Ash and Blended Aggregates. Periodica Polytechnica Civil Engineering, 59 (2). pp. 155-164. ISSN 0553-6626

Brenda, Anak Norbert Rabar. (2005) Case study : understanding the principle and mechanism of alternator motor. [Final Year Project Report] (Unpublished)

Brian, Anak Deng. (2009) Mechanical properties of hybrid polypropylene composite reinforced with coir and oil palm. [Final Year Project Report] (Unpublished)

Brian, Deng. (2009) Mechanical properties of hybrid polypropylene composite reinforced with oil palm and coir fiber. [Final Year Project Report] (Unpublished)

Brian, Wan Martin (2017) Design of a grass harvester for a small scale goat farm. [Final Year Project Report] (Unpublished)

Bryan Gran, Morse (2017) Production and characterization of thin film from sea cucumber. [Final Year Project Report] (Unpublished)

C

CHARMAINE JOANNA, STEPHEN CORNET (2019) MICROWAVE-ASSISTED PYROLYSIS FOR CONVERSION OF KARANJA SEED TO BIO-OIL. [Final Year Project Report] (Unpublished)

Chai, C.H (2010) Design a high performance absorber to improve an anechoic chamber performance. [Final Year Project Report] (Unpublished)

Chai, WWS and Teo, DCL and Ng, CK (2013) Mechanical properties of concrete produced from waste oil palm shell (OPS) coated with PolyVinyl Alcohol (PVA) as aggregates. In: Sustainable Engineering Society Conference.

Chan, Boon Kean (2018) Experimental And CFD Simulation Study Of Thermal Accumulation And Distribution In Parked Car Cabin. [Final Year Project Report] (Unpublished)

Chan, Chung Kiet (2015) Study of feasible fuel additive on reducing ic engine exhaust emission and impriving engine performance. [Final Year Project Report] (Unpublished)

Chang, Josephine Hui Lai and Md Rezaur, Rahman and Sinin, Hamdan (2017) Physical, mechanical, morphological and thermal analysis of styrene-co-glycidyl methacrylate / fumed silica / clay nanocomposites. Jurnal Teknologi, 79 (5). pp. 1-10. ISSN 2180–3722

Charlie, Chin Voon, Sia and J.S.Y., Wong and S.K, Thangavelu and K.H., Chong and Annie, Joseph (2021) Weibull Strength Analysis of Pineapple Leaf Fiber. Materials Science Forum, 1030 (2021). pp. 45-52. ISSN 1662-9752

Cheong, W.L (2010) Image processing for robot vision application using matlab. [Final Year Project Report] (Unpublished)

Cheryl, Rinai Raja (2020) BIODEGRADABLE PACKAGING WITH CORN STARCH RESIN IMPREGNATED WITH PINEAPPLE LEAF FIBRE. [Final Year Project Report] (Unpublished)

Cheryl Rinai, Raja and Marini, Sawawi and Siti Kudnie, Sahari and Magdalene, Andrew Munot and Chin, Suk Fun (2023) A Review on Electrospun Short Fiber Production. INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 15 (5). pp. 28-34. ISSN 2229-838X

Chi Hung, Chong and Andrew Ragai Henry, Rigit and Ali, I. (2021) Wind turbine modelling and simulation using Matlab/SIMULINK. IOP Conf. Series: Materials Science and Engineering. pp. 1-9. ISSN 1757-899X

Chia, Bernard Keow Yee. (2000) Mechanical gripper. [Final Year Project Report] (Unpublished)

Chieng, Yew Kai. (2005) Effect of moisture content (hygric) on the mechanical properties for different fibre volume fractions of donax grandis natural fibres reinforced unsaturated polyester composites. [Final Year Project Report] (Unpublished)

Chong, Choon Hie (2003) Design of dressers transferring device. [Final Year Project Report] (Unpublished)

Chong, Huey Ching (2006) Experimental study on the properties of local coarse aggregate in Sarawak. [Final Year Project Report] (Unpublished)

Chong, Kok Hing (2006) Energy analysis of biomass from agricultural waste. [Final Year Project Report] (Unpublished)

Chong, Poh Kwong (2001) Study of vacuum backups. [Final Year Project Report] (Unpublished)

Chong, Siew Wei (2009) Modifications in transformer design to reduce temperature rise. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Chooi, Chick Ngee. (2004) In-situ determination of the resultant loading in steel reinforcement using ultrasonic. [Final Year Project Report] (Unpublished)

Christopher, Jantai Boniface (2016) A Study on Radian Time Series (RTS) Based Method for Calculating Cooling Load in Equatorial Climates. Masters thesis, UNIMAS.

Christopher, Narang (2008) Design of water pumping and purification system utilizing renewable energy for Sarawak rural area. [Final Year Project Report] (Unpublished)

Christopher Joyle, Indor and Nicholas Kuan, Hoo Tien and Freddy Yeo, Kuok San and Mohd Khairul, Afiq (2023) Tensile Properties of Luffa Acutangula Reinforced Polymer Composite. INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 15 (5). pp. 1-5. ISSN 2600-7916

Chua, Chee Siang. (2004) Relationships between out of balance and misalignment and their vibration characteristics. [Final Year Project Report] (Unpublished)

Chua, Keng Yew. (2005) Material Requirements planning (MRP) practices in Melaka manufacturing companies. [Final Year Project Report] (Unpublished)

Chua, M.K.W (2009) Properties of polystyrene concrete bricks containing sawdust ash. [Final Year Project Report] (Unpublished)

Chua, S.N (2010) Design of an ehd pump for microfluids application. [Final Year Project Report] (Unpublished)

Cyrus Nyawai, Mason (2004) Two channels audio links over optical fiber. [Final Year Project Report] (Unpublished)

D

D.N.F, Awang Iskandar and Nuraya, Abdullah and Alvin Wee, Yeo and Shapiee, Abdul Rahman and Ahmad Hadinata, Fauzi and Rubiyah, Baini (2013) Classification of piper nigrum samples using machine learning techniques: A comparison. In: 3rd International Conference on Digital Information Processing and Communications, ICDIPC 2013, 30 January 2013 through 1 February 2013, Islamic Azad UniversityDubai; United Arab Emirates.

DINA DZUREMILIA, ASAN (2020) EVALUATION OF ELECTROPHORETIC DEPOSITION (EPD) OF GRAPHENE NANOPLATELETS (GNP) DISPERSED IN DIFFERENT SOLVENTS ONTO CARBON FIBER VIA AXIOMATIC DESIGN CONCEPT. [Final Year Project Report] (Unpublished)

DON PEREZ, LIAP (2019) COMPARISON OF CHILD DETECTION SYSTEM WITH ARTIFICIAL INTELLIGENCE USING MOBILENET, YOLOV2 AND YOLOV3 FOR OBJECT DETECTION. [Final Year Project Report] (Unpublished)

Dakek, Ijen (2000) To investigate the possibility of threshing pepper spikes and removing of pepper skin by mechanical mean. [Final Year Project Report] (Unpublished)

Danail Luqman, Mohd Azhar (2023) BIOMASS ENERGY SYSTEM: MINI STEAM TURBINE GENERATOR SYSTEM POWERED BY DRIED OIL PALM FRUITS. [Final Year Project Report] (Unpublished)

Daniel,, Ting Moi Lee. (2006) Feasibility study of pohon Mas Restaurant air-condationing system. [Final Year Project Report] (Unpublished)

Dayang Nur Farah Zurina, Awg Salleh (2017) Improvement of pelletized fruit bunch (EFB) of oil and rice husk by using torefaction and pre-treatment method. [Final Year Project Report] (Unpublished)

Dayang Nur Rafiza, Binti Awang Yusuf. (2006) Application of axiomatic concept to improve the portable crane design. [Final Year Project Report] (Unpublished)

Dayang Salyani, Abang Mahmod and Amir Azam, Khan and Glandut, Nicolas and Labbé, Jean Claude (2018) An evaluation of the B4C formation in sintered ZrB2-SiC ceramic composites at 2100 °C. Journal of Alloys and Compounds, 735. pp. 510-515. ISSN 0925-8388

Dayang Salyani, Abang Mahmod and Glandut, Nicolas and Amir Azam, Khan and Labbe, Jean Claude (2015) Surface oxidation of porous ZrB2-SiC ceramic composites by continuous-wave ytterbium fibre laser. Applied Surface Science, 357. pp. 1982-1990. ISSN 0169-4332

Dayang Salyani, Mahmod and Amir Azam, Khan and Magdalene, Andrew Munot and Glandut, N. and Labbe, Jean Claude (2016) Laser surface treatment of porous ceramic substrate for application in solid oxide fuel cells. IOP Conf. Series: Materials Science and Engineering, 146 (1). pp. 1-7. ISSN 1757-899X

Dewi, Harreh (2019) Production and Engine Performance Analysis of Karanja Biodiesel using Synthesized CaO Catalyst. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Dominic Bechat, anak Nanang (2005) Energy audit on a dyrer in a local ceramic industry. [Final Year Project Report] (Unpublished)

Dunstan Dungat, Tedong (2018) Analysis Of Fracture Behaviour For Aluminium 6061 By Using Finite Element Analysis. [Final Year Project Report] (Unpublished)

E

Easter Izzaline, Anak Meli (2017) Tidal power plant scheme at Kuching Barrage, Sarawak. [Final Year Project Report] (Unpublished)

Ee Ping, Kho (2022) Environmental Monitoring and Simulation Study of Young Sago Palms Cultivated in Mist Chambers. Masters thesis, Universiti Malaysia Sarawak.

Eng, K.S (2005) Cracking behavior of donax grandis natural fibre reinforced polymer composite. [Final Year Project Report] (Unpublished)

Ephrem Ryan, Alphonsus (2018) Control of Heating and Cooling of Adsorbers for Adsorption Cooling from Vehicle Exhaust Waste Heat using Programmable Logic Controller. Masters thesis, Universiti Malaysia Sarawak.

Ervina, Junaidi and Mariatti, Jaafar and Sinin, Hamdan (2017) Influence of Hydroxyl and Carboxyl Functionalized Multi-Walled Carbon Nanotube and Filler Loading on the Tensile Properties of Epoxy Composites. Solid State Phenomena, 264. pp. 58-61. ISSN 1662-9779

Ervina, Junaidi and Mariattia, M. and Sinin, Hamdan (2016) Effect of Filler Loading on the Tensile Properties of Multi-walled Carbon Nanotube and Graphene Nanopowder filled Epoxy Composites. Procedia Chemistry, 19. pp. 897-905. ISSN 1876-6196

Ervina, Junaidi and Mariattia, M. and Sinin, Hamdan (2017) Mechanical, electrical and thermal properties of multi-walled carbon nanotubes/epoxy composites : effect of post-processing techniques and filler loading. Polymer Bulletin, 74 (7). pp. 2513-2533. ISSN 0170-0839

Ervina, Junaidi and Ong, Boon Kian and Mariatti, Jaafar and Sinin, Hamdan (2014) Flexural properties for two-ply glass fiber reinforced composites with different loading of CNT/Epoxy film produced by different methods. Australian Journal of Basic and Applied Science, 8 (15). pp. 383-388. ISSN 1991-8178

Eugene, Anak Jackson Joy (2017) Characterization of COD removal from palm oil mill effluent (POME) with the aid of anaerobic bioreactor. [Final Year Project Report] (Unpublished)

Eugene, J. J. and M. Shahidul, Islam and Mamunur, R. (2019) Optimizing organic materials reduction from hazardous industrial bio-effluent by the aid of c/n enriched inoculum : an approach to use traditional anaerobic reactor to achieve environmental sustainability. Science International (Lahore), 31 (4). pp. 649-654. ISSN 1013-5316

Eugene, Jackson Joy (2023) Optimization of Factors affecting Chemical Oxygen Demand Reduction from Palm Oil Mill Effluent using Anaerobic Digestion. Masters thesis, Universiti Malaysia Sarawak.

F

FELIX FERNANDEZ, BANLEHONG (2019) OBSERVING TOOL WEAR DURING MILLING MILD STEEL IN MINIMUM QUANTITY LUBRICATION (MQL) USING PALM OIL. [Final Year Project Report] (Unpublished)

FINNEGAN TINGGIE DAMPA, INGING (2019) OPTIMIZATION OF BIOGAS PRODUCTION FROM PALM OIL MILL EFFLUENT UNDER THE EFFECT OF SOLID RETENTION TIME, ORGANIC LOADING RATE, AND HYDRAULIC RETENTION TIME. [Final Year Project Report] (Unpublished)

FIRDHAUS, ABDUL GHANI (2019) DESIGN OPTIMIZATION OF AIR INTAKE FILTER SYSTEM FOR CAR’S APPLICATION. [Final Year Project Report] (Unpublished)

Fabian, anak Mikie (2005) Advance study of solar attire dryer. [Final Year Project Report] (Unpublished)

Fabian Halley Pata, Alban Dattu (2019) Investigation of Finite Element Model of Futsal Ball and Simulation of its Impact Characteristics. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Fadhli Muiz, Talib and Muhamad Sukri, Hadi and Hanim, Mohd Yatim and Annisa, Jamali and Mat Hussin, Ab Talib and Intan Zaurah, Mat Darus (2020) Modelling of Flexible Manipulator System Using Flower Pollination Algorithm. In: 2nd International Conference on Applied Engineering (ICAE 2019), 2-3 Oct 2019, Polibatam, Batam Indonesia.

Fahizan, Mahmud (2018) Development Of Particle Image Velocimeter For Two-Dimensional (2d) Flow Field Measurement. [Final Year Project Report] (Unpublished)

Fahizan, Mahmud (2021) Experimental Investigation of Mixing Performance in Laser-fabricated Microfluidic Micromixers. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Faiz, Bin Othman (2017) Recirculated system design for eco-burner based on intake manifold in reciprocating engine. [Final Year Project Report] (Unpublished)

Fammy Faisal, Rasat (2004) Microstrip antenna for television and radio receiver. [Final Year Project Report] (Unpublished)

Fan, Heng Liang and Abdullah, Yassin and Khairul Fikri, Tamrin and Sinin, Hamdan and Chao, Wang (2024) Optimized design and mechanical properties of TPMS porous structures based on selective laser sintering. Matéria (Rio de Janeiro), 29 (3). pp. 1-10. ISSN 1517-7076

Farhana, Yasmin (2021) Effects of Environmental-Friendly Cutting Fluids on Surface Roughness and Tool Wear in Laser-Assisted High Speed Milling of Aluminium Alloy and 316 Stainless Steel. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Farhana, Yasmin and Khairul Fikri, Tamrin and Nadeem Ahmed, Sheikh and Pierre, Barroy and Abdullah, Yassin and Amir Azam, Khan and Shahrol, Mohamaddan (2021) Laser-Assisted High Speed Machining of 316 Stainless Steel: The Effect of Water-Soluble Sago Starch Based Cutting Fluid on Surface Roughness and Tool Wear. Materials, 14 (5). pp. 1-23. ISSN 1996-1944

Farhana, Yasmin and Khairul Fikri, Tamrin and Sheikh, N. A. (2021) Laser-assisted high speed machining of aluminium alloy: The effect of ultrasonic induced droplet vegetable-based cutting fluid on surface roughness and tool wear. Lasers in Engineering, 48 (4-6). 195 -225. ISSN 08981507

Fatai Adesina, Anifowose and Jane, Labadin (2013) Ensemble model of Artificial Neural Networks with randomized number of hidden neurons. In: 8th International Conference on Information Technology in Asia (CITA), 2013, 1-4 July 2013, Kota Samarahan.

Fatai Adesina, Anifowose and Jane, Labadin and Abdulazeez, Abdulraheem (2015) Improving the prediction of petroleum reservoir characterization with a stacked generalization ensemble model of support vector machines. Applied Soft Computing Journal, 26. pp. 483-496. ISSN 1568-4946

Fauziliana, Binti Osman (2010) Development of shape pattern recognition for fpga-based embbeded object tracking system. [Final Year Project Report] (Unpublished)

Foo, T.Y (2004) Door access using smart card. [Final Year Project Report] (Unpublished)

Frank Murphy anak, Junaidi Kutoi (2004) Development of computer program to optimize an air conditioning system for local utilization. [Final Year Project Report] (Unpublished)

Fui, Kiew Liew and Sinin, Hamdan and Md Rezaur, Rahman and Mohamad Rusop, Mahmood and Md. Mizanur, Rahman and Chang, Josephine Hui Lai and Md. Tipu, Sultan (2016) 4-Methylcatechol-treated Jute-Bamboo Hybrid Composites: Effects of pH on Thermo-Mechanical and Morphological Properties. BioResources, 11 (3). pp. 6880-6895. ISSN 1930-2126

Fum, S.C (1998) Higher efficiency management of construction project for small scale contractor. [Final Year Project Report] (Unpublished)

G

Gaddafi, Ismaili and Badorul Hisham, Abu Bakar and Khairul Khuzaimah, Abdul Rahim (2022) Basic and Grade Stress for Some Timber in Sarawak. In: Civil Engineering, Science and Technology Challenges : Structural Engineering and Construction Materials. UNIMAS Publisher, pp. 84-87. ISBN 978-967-2298-90-8

Gaddafi, Ismaili and Badorul Hisham, Abu Bakar and Khairul Khuzaimah, Abdul Rahim (2022) Evaluation of Acacia Mangium in Structural Size at Green Condition. In: Civil Engineering, Science and Technology Challenges : Structural Engineering and Construction Materials. UNIMAS Publisher, pp. 76-83. ISBN 978-967-2298-90-8

Gan, Yong Kiong (2004) Design, construction and experimental work of a mini dissolved fuel alkaline fuel cell for micro-eletronic & mechanical signal application. [Final Year Project Report] (Unpublished)

George Lawai, Galau (2018) ARC Welding Investigation On The Effect Of Independent Input Parameters On Welded Joint Strength Of AISI 1020 Carbon Steel. [Final Year Project Report] (Unpublished)

Ghazali, Bin Ahmad (2010) Performance of profiled steel sheet dry board panel (PSSDB) against flexural and vibration. [Final Year Project Report] (Unpublished)

H

HAWA, RINGKAI (2019) DEVELOPMENT OF AN OFF-AXIS DIGITAL HOLOGRAPHIC MICROSCOPE FOR THREE-DIMENSIONAL (3D) MICROFLUIDICS APPLICATION. [Final Year Project Report] (Unpublished)

Hafiza, Binti Ramji (2010) Effect of cutting fluid on surface roughness in turning operation. [Final Year Project Report] (Unpublished)

Hamdan, S. and Hoque, M.N and Sutan, N.M (2011) Dynamic property analysis and development of composite concrete floor (CCF) and vibration serviceability : a review. International Journal of the Physical Sciences, 6 (34). pp. 7669-7693.

Hamidreza, Namazi and Vladimir V., Kulish (2015) Fractional Diffusion Based Modelling and Prediction of Human Brain Response to External Stimuli. Computational and Mathematical Methods in Medicine, 2015. ISSN 1748-670X

Handie, Ahmataku (2024) Development of Rapid Alignment Polisher’s Hand (RAPH) for Cross section Polishing in Physical Failure Analysis. Masters thesis, Universiti Malaysia Sarawak.

Harini, Sosiati and Arif Muhammad, Rizky and Aldi Lukman, Maulana Latief and Rahmad Kuncoro, Adi and Sinin, Hamdan (2023) The mechanical and physical properties of microcrystalline cellulose (MCC)/sisal/PMMA hybrid composites for dental applications. Materials Research Express, 10 (3). pp. 1-11. ISSN 2053-1591

Harini, Sosiati and Muhammad Fahmi, Rozi and Cahyo, Budiyantoro and Sinin, Hamdan (2022) Comparative Study of Epoxy Composites Reinforced with Kenaf Fiber and Different Types of Microparticles. In: 3rd International Conference on Advances in Materials, Mechanical and Manufacturing, AMMM 2021 and 10th International Conference on Engineering and Innovative Materials virtual conference, ICEIM 2021, 24-26 September 2021, Virtual, Online.

Harini, Sosiati and Yuniar, N.D.M and Saputra, D. and Sinin, Hamdan (2022) The Influence of Carbon Fiber Content on the Tensile, Flexural, and Thermal Properties of the Sisal/PMMA Composites. Evergreen, 9 (1). pp. 32-40. ISSN 2189-0420

Harizama, M.Z. and Tamrin, K.F. and Nukman, Y. and Yusof, F. and Sheikh, N. A. (2018) Effect of Process Parameters on the Laser Joining of Stainless Steel with Three-dimensional (3-D) Printed Polymer Sheet. Lasers in Engineering, 41 (6). pp. 393-408. ISSN 0898-1507

Harreh, Dewi and Saleh, A.A. and Reddy, A. N.R. and Hamdan, S. and Charyulu, K. (2018) Production of Karanja Methyl Ester from Crude Karanja Oil Using Meretrix Lyrata Synthesised Active Cao Catalyst. International Journal of Automotive and Mechanical Engineering, 15 (3). pp. 5683-5694. ISSN 2229-8649

Harriharan, Remash (2018) Study On Melamine Foam As A Sound Absorbing Material. [Final Year Project Report] (Unpublished)

Hashim, Mohammad (2004) Remote control powerboat II (boat construction and engine installation). [Final Year Project Report] (Unpublished)

Haslina, Binti Abdul Rahim. (2000) The energy study on the UNIMAS Faculty of Engineering buildings. [Final Year Project Report] (Unpublished)

Hassan A., Ghazwani and Afrasyab, Khan and Pavel Alexanrovich, Taranenko and Vladimir Vladimirovich, Sinitsin and Mofareh H. H., Ghazwani and Ali H., Alnujaie and Khairuddin, Sanaullah and Atta, Ullah and Andrew Ragai, Henry Rigit (2022) Hydrodynamics of Direct Contact Condensation Process in Desuperheater. Fluids, 7 (9). pp. 1-11. ISSN 2311-5521

Hawa, Ringkai (2022) Investigation on Mixing Performance and Droplet Generation of Dissimilar Liquids through T-junction and Offset T-junction Microchannels. Masters thesis, Universiti Malaysia Sarawak.

Herman Amia, Anak Atek. (2004) Integrated waste management in Sarawak for industry network. [Final Year Project Report] (Unpublished)

Hillary Assan, Anak Liam (2017) Use of laser for non-contact measurement of micro-components, insects, and biological specimens. [Final Year Project Report] (Unpublished)

Ho, Yoong Chow (2001) Go-kart chassis's design and construction based on theoretical and experimental findings. [Final Year Project Report] (Unpublished)

Hon, K.K (2005) Design, fabrication & experimental study of a mini solar cooling refrigerator for mechanical application. [Final Year Project Report] (Unpublished)

Hon, Kah Jui (2004) Design,fabrication and experimental study of a mini alkaline fuel cell for micro-electronic and mechanical application. [Final Year Project Report] (Unpublished)

Hong, Wei Hao (2020) Mechanical Properties Of Polyester Resin Impregnated With Dabai Nutshell Particles. [Final Year Project Report] (Unpublished)

Hor, Keng Seng (2005) A robotwall simulator. [Final Year Project Report] (Unpublished)

Houghton, Anak Eddie. (2010) Study on the effects of calcium carbonate on the mechanical properties of porous clay brick. [Final Year Project Report] (Unpublished)

Hyuga, Kikuchi and Mohd Danial, Bin Ibrahim and Masayuki, Ochiai (2019) Evaluation of Lubrication Performance of Foil Bearings with New Texturing. Tribology Online, 14 (5). pp. 339-344. ISSN 1881-2198

I

I.H, Achong (2000) Design a self-compacting concrete (scc) using local materials-study on workability and compressive strength. [Final Year Project Report] (Unpublished)

Ibrahim, M.D and Amran, S.N.A. and Yunos, Y.S and Rahman, M.R.A. and Mohtar, M. Z. and Wong, L.K. and Zulkharnain, A. (2018) The Study of Drag Reduction on Ships Inspired by Simplified Shark Skin Imitation. Applied Bionics and Biomechanics, 2018. pp. 1-11. ISSN 1176-2322

Ibrahim, M.D and Namba, T. and Ochiai, M. and Hashimoto, H. (2008) Characteristics Analysis and Optimum Design of Small Size Thrust Air Bearing for HDD - Parametric Study. In: Proc. of the Mechanical Engineering Congress, 2008 Japan (MECJ-08), 3-7 Aug 2008, Yokohama National University, Japan.

Ibrahim, M.D and Namba, T. and Ochiai, M. and Hashimoto, H. (2009) Optimization of HDD Thrust Air Bearing for Spindle Motor. In: Proc. of the Japanese Society of Tribologists, Tribology Conference Tokyo, 18-20 May 2009, Tokyo, Japan.

Ibrahim, M.D and Namba, T. and Ochiai, M. and Hashimoto, H. (2009) Optimization of Small Size Thrust Air Bearing with the Consideration of Groove Dimensions and Geometry Variables. In: Proc. of the 4th World Tribology Congress (WTC IV), 6-11 Sep 2009, Kyoto, Japan.

Ibrahim, M.D and Namba, T. and Ochiai, M. and Hashimoto, H. (2010) Optimum design of thrust air bearing for hard disk drive spindle motor. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 4 (1). pp. 70-81. ISSN 1881-3054

Ibrahim Manai, Abdul Hakim (2006) Design and fabrication of an improved crack growth testing apparatus with stress corrosion cracking (SCC) study. [Final Year Project Report] (Unpublished)

Idrus, I. (2002) An evaluation of the characteristics of metal cutting fluid due to the metal chips contamination. [Final Year Project Report] (Unpublished)

Idrus, M.A.M.M and Hamdan, S. and Islam, M.S. (2011) Treated tropical wood sawdust-polypropylene polymer composite : mechanical and morphological study. Journal of Biomaterials and Nanobiotechnology, 2.

Imran, Ali and Andrew Ragai, Henry Rigit and Omar, Yaakob and Jane, Labadin and Altaf Hussain, Rajpar (2023) Tidal energy assessment with hydrodynamic modelling. Indonesian Journal of Electrical Engineering and Computer Science, 29 (2). pp. 1201-1212. ISSN 2502-4752

Inyang, John and Magdalene, anak Andrew Munot and Syed Tarmizi, Bin Syed Shazali and Shirley, Anak Jonathan Tanjong (2019) A Model to Manage Crude Palm Oil Production System. MATEC Web of Conferences, 255 (02001). pp. 1-7. ISSN 2261-236X

Irza, Sukmana and Ulin, Herlina and Anton Sapto, Handoko and Erik, Prasetyo and Yanuar, Burhanuddin and Tarkono, Tarkono and Fauzi, Ibrahim and Yanuar Zulardiansyah, Arief (2023) Semi-solid processing of porous magnesium using Titanium Wire Space Holder (TWSH) for biodegradable bone scaffold application. AIP Conference Proceedings, 2601 (1). pp. 1-11. ISSN 1551-7616

Isham Alwady, Bin Bujang (1999) Performance analysis of a francis turbine using computational fluid dynamics code. [Final Year Project Report] (Unpublished)

Islam, M.S and Hamdan, S. and Jusoh, I. and Rahman, M.R and Talib, Z.A (2011) Dimensional Stability and Dynamic Young's Modulus ofTropical Light Hardwood Chemically Treated with Methyl Methacrylate in Combination with Hexamethylene Diisocyanate Cross-Linker.

Islam, M.S. and Baini, R. and Tanjong, S.J and Said, M.A.M and Joy, E.J (2018) Effects of Hydraulic Retention Time and Solid Retention Time of POME on COD Removal Efficiency. International UNIMAS STEM Engineering Conference 2017, 15 (2). pp. 5347-5355. ISSN 2229-8649

Islam, M.S. and Hamdan, S. and Hasan, M. and Rusop, M. and Rahman, M.R. and Mohd Idrus, M.A.M (2012) Physico-mechanical and decay resistance properties of chemically modified tropical wood material. Journal Applied Polymer Science, 127 (3). pp. 1555-1560.

Islam, M.S. and Hamdan, S. and Hasan, M. and Saleh, A.A. and Rahman, M.R. (2012) Effect of coupling reactions on the mechanical and biological properties of tropical wood polymer composites (WPC). International Biodeterioration & Biodegradation, 72. pp. 108-113.

Islam, Md. Saiful and Hamdan, Sinin and Rahman, Md. Rezaur and Jusoh, Ismail and Ahmed, Abu Saleh and Idrus, Mun'aim (2011) The effect of crosslinker on mechanical and morphological properties of tropical wood material composites. Materials & Design, 32 (4). pp. 2221-2227. ISSN 0264-1275

Ismail, S. and Abu Saleh, Ahmed and Rezaur, Rahman and Hamdan, Sinin (2014) Biodiesel Production from Castor Oil and Its Application in Diesel Engine. ASEAN Journal on Science and Technology for Development, 31 (2). pp. 91-101. ISSN 0217-5460

Ismandi, bin Junaidi (2002) Simulation of air conditioning flow pattern in passenger van. [Final Year Project Report] (Unpublished)

Itoh, K. and Sunami, Y. and Ibrahim, M.D and Namba, T. and Hashimoto, H. (2009) Optimum Design of Fluid Film Bearings Used in Small Size Spindle Motor. In: Mechanical Engineering Congress 2009, Japan Precision Equipments and Functions Divisions, (MECJ-09), 13-16 Sept 2009, Iwate University, Japan.

Ivan Isaac, Anak Thomas (2017) Characterisation of coconut leaves fibre reinforced polymer composite. [Final Year Project Report] (Unpublished)

Izzat, Bin Abdul Malik (2017) Fabrication of functional layer of solar cell by using spin and spray coating technique. [Final Year Project Report] (Unpublished)

J

JASMINE, JENDIA (2019) OUTWARD CURVATURE RUNNER WITH AIR VENTS FOR DIE CASTED TEST PIECE BASED ON MANUFACTURABLE MOLD DESIGN. [Final Year Project Report] (Unpublished)

JASMINE ANAK, JENDIA (2023) Parametric Study for Runner Modification of Die Casted Part with Venting Systems. Masters thesis, Faculty of Engineering, UNIMAS.

JOHN, ANAK INYANG and Magdalene, Andrew Munot (2024) Modeling and Analysis of Process Factors’ Effect on Performance in Crude Palm Oil Processing Time: A Simulation-Based Approach. Masters thesis, FACULTY OF ENGINEERING.

Jaafar, Fatimah (2001) The possibilty of the combined heat and power (CHP) usage at Sampadi Palm Oil processing plant. [Final Year Project Report] (Unpublished)

Jakhrani, A.Q. and Othman, A.K. and Rigit, A.R.H. and Samo, S.R. (2011) Comparison of solar photovoltaic module temperature models. World Appllied Science Journal.

Jakhrani, A.Q. and Othman, A.K. and Rigit, A.R.H. and Samo, S.R. and Kamboh, S.A (2012) A novel analytical model for optimal sizing of standalone photovoltaic systems energy. Energy, 46 (1). pp. 675-682.

Jamali, A. and Mat Darus, I.Z. and Mohd Samin, P.P. and Tokhi, M.O. (2018) Intelligent modeling of double link flexible robotic manipulator using artificial neural network. Journal of Vibroengineering, 20 (2). pp. 1021-1034. ISSN 1392-8716

Jamali, Annisa and Mat Darus, I.Z. and Yatim, H.M and A. Talib, M. H. and Hadi, M.S and Tokhi, M.O. (2020) Intelligent Tuning of PID Controller for Double-Link Flexible Robotic Arm Manipulator by Artificial Bee Colony Algorithm. In: Sensor Networks and Signal Processing. Smart Innovation, Systems and Technologies, 176 . Springer, Singapore, Springer Nature Singapore Pte Ltd. 2021, pp. 533-547. ISBN 978-981-15-4917-5

Jayamani, E. and Sinin, Hamdan and Rahman, M.R. and Bakri, Abdul Karim and Kakar, A. (2015) An investigation of sound absorption coefficient on sisal fiber poly lactic acid bio-composites. Journal of Applied Polymer Science, 132 (34). ISSN 0021-8995

Jayamani, E. and Sinin, Hamdan and Rahman, M.R. and Bakri, M.K.B. (2015) Dielectric Properties of Lignocellulosic Fibers Reinforced Polymer Composites: Effect of Fiber Loading and Alkaline Treatment. Materials Today: Proceedings, 2 (4-5). pp. 2757-2766. ISSN 2214-7853

Jayamani, Elammaran and Soon, Kokheng and Bin Bakri, Muhammad Khusairy and Sinin, Hamdan (2017) Comparative study of sound absorption coefficients of coir/kenaf/sugarcane bagasse fiber reinforced epoxy composites. Key Engineering Materials, 730 (1). pp. 48-53. ISSN 1013-9826

Joe, Gideon Siang (2018) Utilization Of Jatropha Seed Cake For Solid Biofuel. [Final Year Project Report] (Unpublished)

Joel, Anak Ngikoh @ Nyikoh (2017) Integrating an automated sorting machine with image processing device colony enumeration procedure. [Final Year Project Report] (Unpublished)

John Atuh, J. (2000) Novel studies on erbium-doped fiber amplifier. [Final Year Project Report] (Unpublished)

Jong, Alexon Sze Chien. (2003) Design of control system for six legged robot. [Final Year Project Report] (Unpublished)

Julian, Rabing (2023) Hybrid Solar Photovoltaic (Pv) System Design For Rural Areas/School. [Final Year Project Report] (Unpublished)

Junaidi, E. (1999) Thermal analysis of the steam boiler for the sterilization plant at Pepper Marketing Board (PMB) Kuching. [Final Year Project Report] (Unpublished)

K

K., Sanaullah and S.H., Zaidi and J.H., Hills (2001) A study of bubbly flow using resistivity probes in a novel configuration. Chemical Engineering Journal, 83. pp. 45-53. ISSN 1385-8947

Kamaruddin, A.M.N.A. and Hosokawa, A. and Furumoto, T. and Ueda, T. (2016) Cutting characteristics of binderless diamond tools in high-speed turning of Ti-6Al-4Vp: – Availability of single-crystal and nano-polycrystalline diamond. International Journal of Automation Technology, 10 (3). pp. 411-419. ISSN 18817629

Kamran Ahmed, Samo and Andrew Ragai, Henry Rigit and Baharun, Azhaili (2016) Mapping of Tidal Energy Potential based on High and Low Tides for Sabah and Sarawak. MATEC Web of Conferences, 87. ISSN 2261236X

Kashiwabara, Y. and Ibrahim, M.D and Roslan, L. and Watanabe, H. and Sunami, Y. (2021) EFFECTS OF INJECTION SPEED ON MECHANICAL PROPERTIES IN HIGH-PRESSURE DIE CASTING OF MG-RE ALLOY. MM Science Journal, 1 (2021). pp. 4906-4912. ISSN 1803-1269

Kashiwabara, Yuki and Lidyana, Binti Roslan and Mohd Danial, Bin Ibrahim and Ochiai, Masayuki and Hashimoto, Hiromu and Sunami, Yuta (2019) Relationship between Casting Condition and Gas Porosity in Magnesium Alloy Die Casting. In: Proceedings of the 8th International Conference on Manufacturing, Machine Design and Tribology (ICMDT2019), 24-27 April 2019, Kagoshima, Japan.

Kasumawati, Lias and Hazrul, Mohamad Basri and Annisa, Jamali and Abang Mohammad Nizam, Abang Kamaruddin and Siti Kudnie, Sahari (2023) MANUAL PENGGUNA MESIN SESAR UNJUR MENGGUNAKAN SISTEM SOLAR PV. [Manual]

Kasumawati, Lias and Hazrul, Mohamad Basri and Yonis M Yonis, Buswig and Annisa, Jamali and Abang Mohammad Nizam, Abang Kamaruddin and Siti Kudnie, Sahari (2024) Development of 9kWp solar system to enhance smoked shrimp (sesar unjur) production at Igan, Sarawak, Malaysia. e-Prime - Advances in Electrical Engineering, Electronics and Energy, 7. pp. 1-12. ISSN 2772-6711

Keegan Pereira A/L, Victor (2008) Chemical treatment ideal soaking time of empty fruit bunch (EFB) polymer composite to achieve high mechanical properties. [Final Year Project Report] (Unpublished)

Kenneth Hamilton, Anak Munsang (2008) Design of portable coconut milk extractor. [Final Year Project Report] (Unpublished)

Kenny, Hu Shou Hui (2012) Development of real time facial expression control system for digital puppetry. Masters thesis, UNIVERSITI MALAYSIA SARAWAK(UNIMAS).

Khadijah binti, Usaini (2004) Design of buffer to drive large capacitive load with minimum delay. [Final Year Project Report] (Unpublished)

Khairul Amin, Othman (2005) Modelling and fabricating subsonic wing. [Final Year Project Report] (Unpublished)

Khairul Fikri, Bin Tamrin and Sheikh, N. A. and Sapuan, S. M. (2019) Laser drilling of composite material : A review. In: Hole-Making and Drilling Technology for Composites : Advantages, Limitations and Potential. Woodhead Publishing Series in Composites Science and Engineering . Elsevier Ltd., pp. 89-100. ISBN 978-0-08-102397-6

Khairul Fikri, Tamrin and Moghadasi, K. (2019) Experimental Investigation and Parameter Optimization of Low Power CO2 Laser Cutting of a Carbon/Kevlar Fibre-reinforced Hybrid Composite. Lasers in Engineering. pp. 1-24. ISSN 0898-1507

Khairul Fikri, Tamrin and Moghadasi, K. and Sheikh, N. A. (2020) Experimental and numerical investigation on multi-pass laser cutting of natural fiber composite. The International Journal of Advanced Manufacturing Technology, 107. pp. 1483-1504. ISSN 1433-3015

Khairul Fikri, Tamrin and Muhammad Thalhah, Zainal and Mohd Fairus, Mohd Yasin and Wan Fahmin Faiz, Wan Ali and Mohd Hanafi, Ani (2020) Carbon precursor analysis for catalytic growth of carbon nanotube in flame synthesis based on semi-empirical approach. Carbon Letters, 31 (1). pp. 1-10. ISSN 2233-4998

Khairul Fikri, Tamrin and Nurul Amirah, Khalid and Andrew Ragai, Henry Rigit (2020) Fabrication of Flexible Microfluidic Strain Sensor by Laser Micromachining for Hand Motion Tracking. International Journal of Materials, Mechanics and Manufacturing, 8 (3). pp. 138-142. ISSN 1793-8198

Khairunisa, Binti Kamarudin (2017) Fabrictaion of an active layer of organic solar cell (OSC) by using spray coating. [Final Year Project Report] (Unpublished)

Khan, A. and Sanaullah, K. and Ul Haq, N. (2013) Development of a Sensor to Detect Condensation of Super-Sonic Steam. Advanced Materials Research, 650. pp. 482-487.

Khan, Afrasyab and Mohd Sobri, Takriff and Masli Irwan, Rosli and Nur Tantiyani, Ali Othman and Khairuddin, Sanaullah and Andrew Ragai, Henry Rigit and Ajmal, Shah and Atta, Ullah and Muhammad Umar, Mushtaq (2019) Turbulence dissipation & its induced entrainment in subsonic swirling steam injected in cocurrent flowing water. International Journal of Heat and Mass Transfer, 145. ISSN 0017-9310

Khan, Amir Azam and Labbe, Jean Claude (2011) Advanced ceramic matrix composites for high energy X-ray generation. Advances in Natural Sciences, 2 (4).

Kho, Brandon Chin Kheng. (2010) Design of cylindrical solar water heater using aluminim as solar collector. [Final Year Project Report] (Unpublished)

Kho, Ee Ping and Chua, David Sing Ngie and Lim, Soh Fong and Lau, Lee Chung and Mohd Tirmidzi, Ngapdul Gani (2022) Development of young sago palm environmental monitoring system with wireless sensor networks. Computers and Electronics in Agriculture, 193. ISSN 0168-1699

Kho, Evie Siaw Hei. (2004) Transport route optimization using genetic algorithm. [Final Year Project Report] (Unpublished)

Kolot, A. (2002) The study on Sarawak remote area solar energy application problems. [Final Year Project Report] (Unpublished)

Kong, Jing Hui (2018) Study Of Postural Safety And Ergonomic Risk Assessment Among Athlete In Gym. [Final Year Project Report] (Unpublished)

Kong, Kok Yong (2002) Real-time flow rate monitoring system. [Final Year Project Report] (Unpublished)

Koohi, Kaveh Moghadasi (2020) Experimental and Numerical Investigation of CO2 Laser Cutting of Carbon/Kevlar Hybrid Composite. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Kua, Ming Sheng (2010) Development of a small microbial fuel cell plant for wastewater treatment. [Final Year Project Report] (Unpublished)

Kuan, H.T.N and Cantwell, W.J and Hazizan, M.D and Santulli, C. (2011) The fracture properties of environmentally-friendly fibre metal laminates. Journal of Reinforced Plastics & Composites, 30 (6). pp. 499-508.

Kuan, Nicholas Hoo Tien and Sam Pek Kee, Law and Mahshuri, Yusof and Sim Nee, Ting and Ng Chee, Khoon (2022) MECHANICAL PROPERTIES STUDY OF DURIO ZIBETHINUS SKIN FIBER REINFORCED POLYETHYLENE COMPOSITE. Journal of Sustainability Science and Management, 17 (6). pp. 152-158. ISSN 2672-7226

Kuan, Nicholas Hoo Tien and Tan, Ming Yee and Lee, Meng Chuen (2017) Characterization of Alkaline Treatment and Fiber Content on the Physical, Thermal, and Mechanical Properties of Ground Coffee Waste/Oxobiodegradable HDPE Biocomposites. International Journal of Polymer Science, 2017. pp. 1-12. ISSN 1687-9430

Kuryati, Kipli and Cripen, Jiris and Siti Kudnie, Sahari and Rohana, Sapawi and Nazreen, Junaidi and Marini, Sawawi and Kismet, Anak Hong Ping and Tengku Mohd Afendi, Zulcaffle (2018) Morphological and Otsu’s Thresholding-Based Retinal Blood Vessel Segmentation for Detection of Retinopathy. International Journal of Engineering and Technology (UAE), 7 (3.18). pp. 16-20. ISSN 2227-524X

L

LING, TIEW CHEON (2019) DEVELOPMENT OF INTENTION DRIVEN REHABILITATION AND ASSISTIVE HAND EXOSKELETON CONTROL SYSTEM. [Final Year Project Report] (Unpublished)

Lai, Chee Keung (2009) Development of finger rehabilitation device for post-stroke patient. [Final Year Project Report] (Unpublished)

Lai, J.C-H. and Rahman, M.R. and Sinin, Hamdan and Liew, F.K. and Rahman, M.M. and Hossen, M.F. (2015) Impact of nanoclay on physicomechanical and thermal analysis of polyvinyl alcohol/fumed silica/clay nanocomposites. Journal of Applied Polymer Science, 132 (15). ISSN 0021-8995

Lai, Josephine Chang Hui and Md. Rezaur, Rahman and Sinin, Hamdan (2015) Physical, Mechanical, and Thermal Analysis of Polylactic Acid/Fumed Silica/Clay (1.28E) Nanocomposites. International Journal of Polymer Science, 2015. pp. 1-8. ISSN 16879422

Lai, Josephine Chang Hui and Md. Rezaur, Rahman and Sinin, Hamdan (2016) Polyvinyl Alcohol/Silica/Clay Composites: Effect Of Clay On Surface Morphology And Thermo-Mechanical Properties. Jurnal Teknologi, 78 (1). pp. 45-53. ISSN 2180–3722

Lai, Josephine Chang Hui. (2016) Studies on Physico-Mechanical, Thermal and Morphological Properties of Silica/Fumed Silica and Various Nanoclay Dispersed Polymer Nanocomposites. Masters thesis, UNIMAS.

Lai, Suk Na (2018) Development Of A Child Detection System With Artificial Intelligence (Ai) Using Object Detection Method. [Final Year Project Report] (Unpublished)

Lam, Chin Yueh (2004) Design and construction of attire dryer for high-rise building. [Final Year Project Report] (Unpublished)

Latit, D.K (2010) Mechanical properties on bamboo. [Final Year Project Report] (Unpublished)

Lau, Jeffrey Yong Lian (2014) Effect of palm oil fuel ash (POFA) fineness on the mechanical properties of concrete. Masters thesis, Universiti Malaysia Sarawak, UNIMAS.

Law, Perry Nyuk Khui and Md. Rezaur, Rahman and Sinin, Bin Hamdan and Elammaran, Jayamani and Muhammad Khusairy, Bin Bakri and Khairuddin, Sanaullah (2020) Synthesis and Characterization of Micro-nano Carbon Filler from Jatropha Seeds. BioResources, 15 (2). pp. 3237-3251. ISSN 1930-2126

Law, Sam Pek Kee (2018) Investigation On Mechanical Properties Of Durio Zibethinus Fibre Reinforced Composite. [Final Year Project Report] (Unpublished)

Lee, Chiew Tin and Kimberly Foo, Ming-Xia and Lee, Mei Bao and Mong, Guo Ren (2023) A BIBLIOMETRIC ANALYSIS OF FATTY ACID METHYL ESTER (FAME) TRIBOLOGY (2010 TO 2019). Journal of Transport System Engineering, 10 (2). pp. 46-59. ISSN 2289-9790

Lee, Chiew Tin and Lee, Mei Bao and Mong, Guo Ren and William Chong, Woei Fong (2022) A bibliometric analysis on the tribological and physicochemical properties of vegetable oil--based bio-lubricants (2010--2021). Environmental Science and Pollution Research, 29 (37). pp. 56215-56248. ISSN 1614-7499

Lee, Chiew Tin and Lee, Mei Bao and Siti Hartini, Hamdan and William Chong, Woei Fong and Chong, Cheng Tung and Hedong, Zhang and Allan Chen, Woei Loon (2022) Trimethylolpropane trioleate as eco-friendly lubricant additive. Engineering Science and Technology, an International Journal, 35. pp. 1-10. ISSN 2215-0986

Lee, Chiew Tin and Lee, Mei Bao and William Chong, Woei Fong and Ng, Jo-Han and Wong, King Jye and Chong, Cheng Tung (2022) Boundary lubricity of vegetable-oil-derived trimethylolpropane (tmp) ester. Lubricants, 10 (12). p. 346. ISSN 2075-4442

Lee, Chiew Tin and Lee, Mei Bao and William Chong, Woei Fong and Syahrullail, Samion (2022) Nano-frictional investigation on boundary lubricity of oleic acid, methyl oleate and trimethylolpropane trioleate. Jurnal Tribologi, 32. pp. 1-15. ISSN 2289-7232

Lee, Chiew Tin and Low, Hong Lian and Lee, Mei Bao (2023) Effect of Intermediate Esters Towards Boundary Lubricity of Palm Methyl Ester. Journal of Transport System Engineering, 10 (2). pp. 14-20. ISSN 2289-9790

Lee, Delsye Teo Ching and Lee, Tansuet (2016) The effect of aggregate condition during mixing on the mechanical properties of oil palm shell (OPS) concrete. MATEC Web of Conferences, 87. ISSN 2261236X

Lee, Kean Yew. (2008) Phase measurement method using interferometry technique. [Final Year Project Report] (Unpublished)

Lee, Mei Bao and Elizabeth, Balan and Lee, Chiew Tin (2023) ENHANCING TRIMETHYLOLPROPANE TRIOLEATE BIOLUBRICANT WITH METHYL LAURATE ADDITIVE. Journal of Transport System Engineering, 10 (2). pp. 8-13. ISSN 2289-9790

Lee, Mei Bao and Hong, Pui Yee and Nur Aisya Affrina, Mohamed Ariffin and Lee, Chiew Tin (2023) THE TRIBOLOGICAL PERFORMANCE OF PERFLUOROPOLYETHER-BASED GREASE BIOLUBRICANT : A BIBLIOMETRIC ANALYSIS. Journal of Transport System Engineering, 10 (1). pp. 30-38. ISSN 2289-9790

Lee, Mei Bao and Lee, Chiew Tin and Mong, Guo Ren and William Chong, Woei Fong and Suhaila, Mohd Sanip (2024) A bibliometric analysis on the development trend of graphene-based transparent conductive electrodes (2009-2022). Materials Today Sustainability, 25. pp. 1-21. ISSN 2589-2347

Lee, Mei Bao and Lee, Chiew Tin and William Chong, Woei Fong and Suhaila, Mohd Sanip (2023) A Quick and Facile Solution-Processed Method for PEDOT: PSS Transparent Conductive Thin Film. IIUM Engineering Journal, 24 (1). pp. 170-182. ISSN 2289-7860

Lee, Mei Bao and Lee, Chiew Tin and William Chong, Woei Fong and Wong, King Jye (2023) Post-thermal annealed monolayer graphene healing elucidated by Raman spectroscopy. Journal of Materials Science, 58 (25). pp. 10288-10302. ISSN 1573-4803

Lee, Wan Inn (2002) The design of fixture for product, bearing 97, for CNC machine. [Final Year Project Report] (Unpublished)

Lee, Wei Leong (2000) Cutting fluid condition monitoring. [Final Year Project Report] (Unpublished)

Lee, William Chu Ching. (1998) Thermal modelling and control of building temperature. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Legenda Prameswono, Pratama and Sinka, Wilyanti and Adi, Setiawan and Hamzah, Hamzah and Mauludi, Manfaluthy and Yanuar Zulardiansyah, Arief and Safaa Najah Saud, Al-Humairi (2024) Design of Alternative Energy Using Thermoelectricity by Utilizing a Dispenser Heat Tank Using IOT. EKSERGI: Jurnal Teknik Energi, 20 (2). pp. 37-42. ISSN 0216-8685

Leo, Sing Lim. (2004) Relative shaft displacement and vibration measurements for the early fault detection in rolling element bearing. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Leong, Wei Chian (2002) Design Of Control System For The Turn Table Module. [Final Year Project Report] (Unpublished)

Lew, Hao Xian (2018) Conceptual Design And Analysis Of Sago Drying Machine. [Final Year Project Report] (Unpublished)

Lidyana, Roslan and Annisa, Jamali and Abang Mohammad Nizam, Abang Kamaruddin and Ana Sakura, Zainal Abidin and Mohd Syahmi, Jamaludin (2024) Optimizing Heat Flow for Sustainable Smoking: Dual-Heating System to Reduce Mangrove Consumption and Control PAH Contamination. In: 2023 IEEE 9th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA2023), 17-18 October 2023, Kuala Lumpur.

Lidyana, Roslan and Annisa, Jamali and Rudiyanto, Philman Jong and Ana Sakura, Zainal Abidin and Abang Mohammad Nizam, Abang Kamaruddin and Rasli, Muslimen and Shahrol, Mohamaddan and Mohd Zulhatta, Kifli and Mohd Syahmi, Jamaludin (2022) Evaluation of the Smoked Machine with Dual Heating Sources. In: 2022 IEEE 8th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA), 26-28 September 2022, Melaka, Malaysia.

Lidyana, Roslan and Annisa, Jamali and Sim, Cai Ying and Mark Louis, Jimmy and Abg Mohd Nizam, Abg Kamaruddin and Mohamad Zulhuschmi, Mohamad Afif Zulhusmi (2024) Real-Time Monitoring of Modular Carbon Capture Machines with Sensor Networks and Node-RED. In: 2024 IEEE 10th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA), 30-31 July 2024, Bandung, Indonesia.

Liew, Fui Kiew (2017) Physico-Mechanical Properties of Chemically Treated Jute-Bamboo Hybrid Composites. PhD thesis, UNIMAS.

Liew, Michael Kok Yin. (2004) Redesign of go kart transmission system. [Final Year Project Report] (Unpublished)

Liew,, Kiat Juang. (2006) Production scheduling practice. [Final Year Project Report] (Unpublished)

Lim, Anthony Wee Liang. (2008) Effect of various conditions on adhesively bonded glass fiber reinforced plastic (GFRP). [Final Year Project Report] (Unpublished)

Ling, Kiong Chai (2001) Fault classification in rolling element bearing using vibration monitoring. [Final Year Project Report] (Unpublished)

Liong, A. (2009) The effect of calcium oxide addition in chitosan-sago composite conductivity. [Final Year Project Report] (Unpublished)

Long,, Pan Kok and Halimahtun, M. Khalid and Ha, H.U (2000) Ergonomic Design of a Mechanical Device for Increasing the Rate of Union in Open Fractures of the Tibia. In: Proceedings of the Human Factors and Ergonomics Society Annual Meeting, July 2000.

Loyrita Dulling, Anak Pantau (2017) Low current tidal stream turbine for sarawak tidal stream application. [Final Year Project Report] (Unpublished)

Lucia, Anak Chang Embo (2017) Water quality in aquaponics system. [Final Year Project Report] (Unpublished)

Luqman, Bin Abdul Khalek (2017) Video based motion analysis for the overhead badminton forehand stroke. [Final Year Project Report] (Unpublished)

Lydiana, Binti Johnny Yakop (2004) Creep testing on material. [Final Year Project Report] (Unpublished)

M

Mohd Khairul, Afiq and Nicholas Kuan, Hoo Tien and Mohamad Zaki, Hassan (2023) Tensile Properties Characterisation of Hybrid Luffa/GCW Fiber Reinforced Polymer Composite. Materials Science Forum, 1111. pp. 77-82. ISSN 1662-9752

M. N., Mohiddin and A. A., Saleh and A. N. R., Reddy and Sinin, Hamdan (2018) A Study on Chicken Fat as an Alternative Feedstock: Biodiesel Production, Fuel Characterisation, and Diesel Engine Performance Analysis. International Journal of Automotive and Mechanical Engineering, 15 (3). pp. 5535-5546. ISSN 2180-1606

M. N. F., Saniman and M. H. M., Hashim and K. A., Mohammad and K. A., Abd Wahid and W. M., Wan Muhammad and N. H., Noor Mohamed (2020) Tensile Characteristics of Low Density Infill Patterns for Mass Reduction of 3D Printed Polylactic Parts. INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, 17 (2). pp. 7927-7934. ISSN 2229-8649

M. S. M.`, Aras and A. S., Mohd Nor and S. S., Abdullah and Rashid, M. Z. A. and Annisa, Jamali (2013) Development of Subsea Altimeter Sensor System (SASS) Using Portable Sonar Sensor Fish Finder Alarm for Unmanned Underwater Vehicles. International Journal on Recent Trends in Engineering & Technology, 8 (2). pp. 110-115. ISSN 2158-5563

M. Shahidul, Islam and Malcolm, M. L. and Eugene, J. J. and Mamunur, R. (2018) Optimization of factors affecting biogas production from POME. Science International (Lahore), 30 (6). pp. 851-859. ISSN 1013-5316

M. Shahidul, Islam and Malcolm, M. L. and Eugene, J. J. and Sharafatul, M.I (2019) A Novel Study On Biogas Production From Palm Oil Mill Effluent With Two-Stage Anaerobic Digester And Nano Membrane. Science International (Lahore), 31 (6). pp. 811-819. ISSN 1013-5316

M. Shahidul, Islam and Michael, A. B. (2022) FACTORS AFFECT CLEAN WATER PRODUCTION PERFORMANCE : A REVIEW ON ULTRAFILTRATION MEMBRANE. Sci Int {lahore), 34 (6). pp. 537-544. ISSN 1013-5316

M. Shahidul, Islam and Michael, A. B. and Rubiyah, Baini and Adzlan, A. F. and Hishammudin Afifi, Huspi (2023) IMPACT OF COAGULANTS ON THE TSS SEPARATION PERFORMANCE IN CLEAN WATER PRODUCTION : AN EXPERIMENTAL FINDINGS. SCIENCE INTERNATIONAL (LAHORE), 35 (4). pp. 489-495. ISSN 1013-5316

M. Shahidul, Islam and Rubiyah, Baini and Shirley, Johnathan Tanjong and Ahmad, A.F and Hishammudin Afifi, Huspi (2023) CLEAN WATER PRODUCTION PERFORMANCE MEASUREMENT INDICATORS AND FACTORS: A REVIEW ON ULTRAFILTER MEMBRAN. Sci Int Lahore, 35 (3). pp. 209-218. ISSN 1013-5316

M. Shahidul, Islam and Syed Tarmizi, Syed Shazali and Sarip, A.S.H. (2017) ENERGY EXTRACTION EFFICIENCY OF IN-STREAM MULTISTAGE MICRO-HYDRO TURBINE. Sci. Int. (Lahore), 29 (5). pp. 1129-1134. ISSN 1013-5316

M.F, Ashari and A., Hanafusa and Mohamaddan, Shahrol (2022) Evaluation of Upper Limb Muscle Activation Using Musculoskeletal Model with Wearable Assistive Device. Applied Bionics and Biomechanics, 2022 (890806). pp. 1-10. ISSN 1754-2103

M.F, Ashari and Akihiko, Hanafusa and Yuji, Kubota and Daigo, Nishimori (2019) Preliminary Study on Muscle Force Estimation using Musculoskeletal Model for Upper Limb Rehabilitation with Assistive Device for Home Setting. In: International Conference on Biomedical Engineering (ICoBE), 26-27 August 2019, Penang, Malaysia.

M.F, Ashari and M.D, Ibrahim and A., Husaini and A, Zulkharnain (2014) Accelerated Production of White Pepper Using Integrated Mechanical and Enzymatic Solutions in an Automated Machine. Key Engineering Materials, 574. pp. 304-307.

MAMUNUR, RASHID (2019) Biogas Production from Palm Oil Mill Effluent (POME) by Optimum Level of Inputs. [Final Year Project Report] (Unpublished)

MD, Ibrahim and YS, Yunos and ARH, Rigit and NAA, Mohtadzar and N, Watanabe and Y, Sunami and MRA, Rahman and LK, Wong and MZ, Mohtar (2017) Blood-mimicking delivery in polygonal structure of inner quadrupletip microneedle with valveless micro-pump. Journal of Physics: Conference Series, 822 (1). ISSN ‎1742-6588 (print)

MELVIN LUAT, AUGUSTINE LUBON (2019) Correlation Study of Relationship Between Hardness and Microstructure in Mechanical Properties of Heat Treatable Aluminium Alloys. [Final Year Project Report] (Unpublished)

MOHAMAD HISYAM, SUFFIAN (2019) EVALUATION OF BIOETHANOL FROM WASTE PINEAPPLE AS ADDITIVE WITH DIESL BLEND FUEL FOR DIESEL ENGINE. [Final Year Project Report] (Unpublished)

MOHD HARITH, RAMZI (2020) SYNTHESIS OF STARCH BASED AEROGELS. [Final Year Project Report] (Unpublished)

MUHAMAD FADZLI, ASHARI and AKIHIKO, HANAFUSA and SHAHROL, MOHAMADDAN (2023) Musculoskeletal Modelling and Simulation for Upper Limb Muscle Activities. In: 2023 15th International Conference on Computer and Automation Engineering (ICCAE), Sydney, Australia, 03-05 March 2023, Sydney, Australia.

MUHAMMAD SHAHID, MANSOR (2020) STEAM SYSTEM OPTIMIZATION AT A PALM OIL REFINERY PLANT IN SOUTHERN PENINSULAR MALAYSIA. [Final Year Project Report] (Unpublished)

Magdalene, Andrew Munot and Abdullah, Hj. Yassin and Syed Tarmizi, Syed Shazali and Marini, Sawawi and Shirley, Jonathan Tanjong and Nur Tahirah, Razali (2018) Analysis of production planning activities in remanufacturing system. Journal of Mechanical Engineering and Sciences, 12 (2). pp. 3548-3565. ISSN 2231-8380

Magdalene, Andrew-Munot and John, Inyang and Shirley, Jonathan Tanjong and Syed Tarmizi, Syed Shazali and Ervina, Junaidi (2023) Effects of multiple variable factors on crude palm oil processing time: A simulation-based approach. Journal of Engineering Science and Technology (JESTEC), 18 (4). pp. 1805-1830. ISSN 1823-4690

Magdalene, Andrew-Munot and Raafat, N Ibrahim and Ervina, Junaidi (2015) An Overview of Used-Products Remanufacturing. Mechanical Engineering Research, 5 (1). ISSN 1927-0615

Magdalene, Andrew-Munot and Raafat, N. Ibrahim (2013) Development and analysis of mathematical and simulation models of decision-making tools for remanufacturing. Production Planning & Control, 24 (12). pp. 1081-1100. ISSN 0953-7287

Magdalene, Andrew-Munot and Shirley, Jonathan Tanjong (2022) Performance Analysis of Remanufacturing System Considering Inspection & Grading Policies, Sourcing Policies and Resource Policies. Journal of Optimization in Industrial Engineering, 15 (2). pp. 75-86. ISSN 2423-3935

Mahmood, A. and Sapuan, S. M. and Karmegam, Karuppiah and Abu, Saleh Ahmed (2018) Design and Development of Kenaf Fiber-Reinforced Polymer Composite Polytechnic Chairs. Asian Journal of Agriculture and Biology, 6. pp. 62-65. ISSN 23078553

Mahshuri, Yusof (1999) Monitoring deterioration and lubricity of cutting fluid. [Final Year Project Report] (Unpublished)

Mahshuri, Yusof and Sinin, Hamdan and Aaliyawani Ezzerin, Sinin (2023) Mechanical Properties of Concrete with Clam Shell Powder (CSP) as Partial Cement Replacement. Key Engineering Materials, 956. pp. 205-211. ISSN 1662-9795

Mahsuri, Yusof and Nur Tahirah, Razali and Marini, Sawawi and Kuan, Nicholas Hoo Tien and Dexter Sigan, John (2020) Characterisation of Polymesoda bengalensis Shell Powder. Journal of Applied Science & Process Engineering, 7 (1). pp. 500-509. ISSN 2289-7771

Maidal, Saiful Islam and Nurshamiela, S B M Azmee and Ashaari, Zaidon and Sinin, Hamdan and Abdul, Rasyid and Kh Nurul, Islam (2017) Properties of Wood Polymer Nanocomposites Impregnated With ST-co-EDA/Nanoclay. Macromolecular Symposia, 371 (1). p. 128. ISSN 1022-1360

Majorie, Telun Avit (2017) Mechanical properties of concrete with clam shell powder as partal cement replacement. [Final Year Project Report] (Unpublished)

Malcolm Mussen, Lamoh (2020) Optimization of Biogas Production from POME mixed with Indigenous Inoculum using Two-Stage Anaerobic Reactor Operating at Mesophilic Temperature, Coupled with Nanomembrane Separator. PhD thesis, Universiti Malaysia Sarawak (UNIMAS).

Manchuri, Amaranadha Reddy (2018) Production, Optimization and Performance Analysis of Jatropha Biodiesel using Nano CaO Catalyst Synthesized from Polymesoda erosa Seashells. PhD thesis, Universiti Malaysia Sarawak (UNIMAS).

Marini, Sawawi and Cheryl, Rinnai and Siti Kudnie, Sahari and Sinin, Hamdan and Nur Tahirah, Razali and Nicholas, Kuan (2022) Conversion of Electrospun Polyarylonitrile (PAN) into Carbon Fibres. International Journal of Nanoelectronics and Materials, 15. pp. 277-283. ISSN 1985-5761

Marini, Sawawi and Cheryl Rinnai, Raja and Shirley, Jonathan Tanjung and Sinin, Hamdan and Siti Kudnie, Sahari and Rohana, Sapawi and Ervina, Junaidi and Mahshuri, Yusof and Noor Hisyam, Noor Mohamed (2023) Effects of UV Irradation on Electrospun PLLA and PAN in the Production of Short Electropun Fibres Using Ultrasonication Method. Pertanika Journal of Science & Technology, 31 (5). pp. 2441-2551. ISSN 0128-7680

Marini, binti Sawawi (1999) Investigating on the effects of damages on the flexural strength of glass fiber reinforced plastics (grp). [Final Year Project Report] (Unpublished)

Mas Nor Zamirlah, Binti Zamirhan (2017) Improving ergonomics working condition in medium sized manufacturing industry. [Final Year Project Report] (Unpublished)

Mat Hussin, Ab Talib and Hanim, Mohd Yatim and Nik Mohd Ridzuan, Shaharuddin and Muhamad Sukri, Hadi and Intan Zaurah, Mat Darus and Annisa, Jamali (2020) Intelligent Optimization of Force Tracking Parameters for MR Damper Modelling using Firefly Algorithm. In: 2nd International Conference on Applied Engineering (ICAE 2019), 2-3 Oct 2019, Polibatam, Batam Indonesia.

Matius, Juanis. (2005) The impact of using automation technology in high technology manufacturing company. [Final Year Project Report] (Unpublished)

Maulana, Bin Hanapi. (2002) Sensors for temperature measurement : error measurement of type K thermocouple. [Final Year Project Report] (Unpublished)

Maureen, Tambi (2019) Pack Carburizing Study Of Low(Mild) Carbon Steel Through Activated Carbon. [Final Year Project Report] (Unpublished)

Maxwel Budith, Anak Mogun. (2010) Mechanical properties of banana fiber reinforced composite. [Final Year Project Report] (Unpublished)

Md Rezaur, Rahman and Lai, Josephine Chang Hui and Sinin, Hamdan (2016) Physical, Mechanical, Thermal and Morphology Properties of Biodegradable Polymer Nanocomposites and Its Comparison. MATEC Web of Conferences, 87. ISSN 2261236X

Md Rezaur, Rahman and Sinin, Hamdan and Chang, Josephine Hui Lai and Jawaid, M. and Fahmi Asyadi, Bin Md Yusof (2017) Physico-mechanical, thermal and morphological properties of furfuryl alcohol/2-ethylhexyl methacrylate/halloysite nanoclay wood polymer nanocomposites (WPNCs). Heliyon, 3. ISSN 2405-8440

Md Saiful, Islam and Sinin, Hamdan and Habibur Rahman, Sobuz and Md Rezaur, Rahman and Abu Saleh, Ahmed (2012) Thermal and decay-resistance properties of tropical wood–plastic composites. Journal of Composite Materials, 47 (12). pp. 1493-1500. ISSN 2164-5655

Md Tipu, Sultan (2019) Preparation and Characterization of Wood Polymer Nanocomposites (WPNCs) for Sustainable Application. PhD thesis, Universiti Malaysia Sarawak (UNIMAS).

Md. Arefin, Kowser and Sikder Muhammad, Khalid Hossain and Md. Ruhul, Amin and Mohammad Asaduzzaman, Chowdhury and Nayem, Hossain and Osama, Madkhali and Md. Rezaur, Rahman and Muhammad Tariq, Saeed Chani and Abdullah, M. Asiri and Jamal, Uddin and Mohammed, M. Rahman (2023) Development and Characterization of Bioplastic Synthesized from Ginger and Green Tea for Packaging Applications. Journal of Composites Science, 7 (3). pp. 1-17. ISSN 2504-477X

Md. Faruk, Hossen and Sinin, Hamdan and Md. Rezaur, Rahman (2018) Improved Mechanical Properties Of Silane Treated Jute/Polyethylene/Clay Nanocomposites. Malaysian Applied Biology Journal, 47 (1). pp. 209-215. ISSN 0126-8643

Md. Faruk, bin Hossen (2016) Characterization of chemically treated jute fiber reinforced polyethylene clay nanocomposites as a function of treatment methods. PhD thesis, UNIMAS.

Md. Rezaur, Rahman and Chang, Josephine Hui Lai and Sinin, Hamdan (2017) Evaluation of Acrylonitrile/Butyl Methacrylate/Halloysite Nanoclay Impregnated Wood Polymer Nanocomposites. BioResources, 12 (1). pp. 1871-1889. ISSN 1930-2126

Md. Rezaur, Rahman and Josephine, Chang Hui Lai and Sinin, Hamdan and Abu Saleh, Ahmed and Rubiyah, Baini and Shanti Faridah, Saleh (2013) Combined Styrene/MMA/Nanoclay Cross-linker Effect on Wood-Polymer Composites (WPCs). BioResources, 8 (3). pp. 4227-4237. ISSN 1930-2126

Md. Rezaur, Rahman and Md. Nazrul, Islam and Md. Monimul, Huque and Sinin, Hamdan and Abu Saleh, Ahmed (2010) Effect Of Chemical Treatment On Rice Husk (RH) Reinforced Polyethylene (PE) Composites. BioResources, 5 (2). pp. 854-869. ISSN 1930-2126

Md. Rezaur, Rahman and Md. Tipu, Sultan and Sinin, Hamdan and Nur Syuhada, Ahmad Zauzi and Chang, Josephine Hui Lai (2017) Clay Dispersed Styrene-co-3-Trimethoxy Silyl Propyl Methacrylate Impregnated Kumpang Wood Polymer Nanocomposites: Impact on Mechanical and Morphological Properties. Procedia Engineering, 184. pp. 529-537. ISSN 1877-7058

Md. Rezaur, Rahman and Sinin, Bin Hamdan and Rubiyah, Binti Baini and Muhammad Khusairy, Bin Bakri and Muhammad, Adamu and Akshay, Kakar and Khairuddin, Sanaullah and Law, Perry Nyuk Khui (2020) Chemically Treated Borneo Sago (Metroxylon sagu) Starch Reinforced Poly Lactic Acid Bio-composites. Bioresources, 15 (1). pp. 1641-1655. ISSN 1930-2126

Md. Rezaur, Rahman and Sinin, Hamdan and Abu Saleh, Ahmed and Md. Saiful, Islam (2010) Mechanical And Biological Performance Of Sodium Metaperiodate-Impregnated Plasticized Wood (Pw). BioResources, 5 (2). pp. 1022-1035. ISSN 1930-2126

Md. Rezaur, Rahman and Sinin, Hamdan and Chang, Josephine Hui Lai and Mohammad, Jawaid and Fahmi Asyadi, Bin Md Yusof (2017) Physico-mechanical, thermal and morphologicalproperties of furfurylalcohol/2-ethylhexyl methacrylate/halloysite nanoclay woodpolymer nanocomposites (WPNCs). Heliyon, 3 (7). ISSN 2405-8440

Md. Rezaur, Rahman and Sinin, Hamdan and Mahbub, Hasan and Ruby, Baini and Abu A., Salleh (2015) Physical, Mechanical, and Thermal Properties of Wood Flour Reinforced Maleic Anhydride Grafted Unsaturated Polyester (UP) Biocomposites. BioResources, 10 (3). ISSN 1930-2126

Md. Saiful, Islam and Abu Saleh, Ahmed and Aminul, Islam and Sidek, Abdul Aziz and Low, Chyi Xian and Moniruzzaman, Mridha (2014) Study on Emission and Performance of Diesel Engine Using Castor Biodiesel. Journal of Chemistry, 2014. ISSN 2090-9071

Md. Saiful, Islam and Irmawati, Binti Ramli and Sinin, Hamdan and Rezaur, Rahman and Ahmad Adib, Aiman and Abdul, Rasyid and Amyrah, Auni (2016) Impact of Nanoclay on the Properties of Wood Polymer Nanocomposites. In: Nanoclay Reinforced Polymer Composites. Engineering Materials . Springer Singapore, pp. 291-307. ISBN 978-981-10-1953-1

Md. Saiful, Islam and Sinin, Hamdan and Zainal Abidin, Talib and Abu Saleh, Ahmed and Md. Rezaur, Rahman (2012) Tropical wood polymer nanocomposite (WPNC): The impact of nanoclay on dynamic mechanical thermal properties. Composites Science and Technology, 72. pp. 1995-2001. ISSN 0266-3538

Md. Tipu, Sultan and Md. Rezaur, Rahman and Sinin, Hamdan and Chang, Josephine Hui Lai and Zainal Abidin, Talib (2016) Clay Dispersed Styrene-co-Glycidyl Methacrylate Impregnated Kumpang Wood Polymer Nanocomposites: Impact on Mechanical and Morphological Properties. BioResources, 11 (3). pp. 6649-6662. ISSN 1930-2126

Md. Tipu, Sultan and Md. Rezaur, Rahman and Sinin, Hamdan and Zainal Abidin, Talib and Fahmi Asyadi, Bin Md Yusof and Chang, Josephine Hui Lai (2017) Impact of Various pH Levels on 4-Methyl Catechol Treatment of Wood. BioResources, 12 (2). pp. 3601-3617. ISSN 1930-2126

Michelle Gian, Kah Shin and Then, Yi Lung and Tay, Fei Siang and Jubaer, Ahmed and Chamath Kalanaka, Vithanawasam (2018) A Game-Based Approach for Hemiplegia Lower Limb Rehabilitation. In: 2018 2nd International Conference on BioSignal Analysis, Processing and Systems (ICBAPS), 24-26 July 2018, Kuching, Malaysia.

Mohamad Ali, S. (2008) Effect of moisture on tensile properties of oil palm empty fruit bunch (EFB) unsaturated polyester composites. [Final Year Project Report] (Unpublished)

Mohamad Ariffin, Zulkiply (2002) Hazard and operability (Hazop) study of the boiler trip system at Sejingkat power corporation (SPC). [Final Year Project Report] (Unpublished)

Mohamad Asrul, Mustapha Gas Fitter II. [Teaching Resource]

Mohamad Asrul, Mustapha Gas Fitter III. [Teaching Resource]

Mohamad Asrul, Mustapha (2005) Surface preparation and adhesive joining. [Final Year Project Report] (Unpublished)

Mohamad Asrul, Mustapha and Abang Mohammad Nizam, Abang Kamaruddin and Amira Satirawaty, Mohamed Pauzan Evaluation of demand control ventilation impact on indoor air quality and energy efficiency of an office space. [Working Paper]

Mohamad Iskandar, Jobli and Runming, Yao and Zhiwen, Luo and Shahrestani, Mehdi and Nan, Li and Hong, Liu (2019) Numerical and experimental studies of a Capillary-Tube embedded PCM component for improving indoor thermal environment. Applied Thermal Engineering, 148. pp. 466-477. ISSN 1359-4311

Mohamad Rusli, Bin Parali (2017) Automated sorting machine for counting colony forming units (CFUs). [Final Year Project Report] (Unpublished)

Mohamad Satim, bin Selbi (2002) Design of water current turbine for electricity generation from tidal energy. [Final Year Project Report] (Unpublished)

Mohamad Syamim, Hamsawi (2021) Development of Semi-automated Kek Lapis Sarawak Machine: Analysis on Baking and Cooking Processes. Masters thesis, Universiti Malaysia Sarawak.

Mohamad Syamim, Hamsawi and Ana Sakura, Zainal Abidin and Shahrol, Mohamaddan and Rasli, Muslimen and Mohd Syahmi, Jamaludin and Nurul Izzati, Hashim and Nazreen, Junaidi (2016) A Review on Development of Kek Lapis Sarawak's Machine. MATEC Web of Conferences, 87. ISSN 2261236X

Mohamad Syazwan Zafwan, Mohamad Suffian and Shahrol, Mohamaddan and Abg Mohd Aizuddin, Abg Mohd Mohtar (2021) Modal Analysis of Keropok Keping Drying Machine. Modal Analysis of Keropok Keping Drying Machine, 1062 (1). 012003-012004.

Mohamad Syazwan Zafwan, Mohamad Suffian and Syahiir, Kamil and Ahmad Kamal, Ariffin (2022) Uncertainty analysis of varied meshes of a finite element model using Monte Carlo simulation. International Journal of Structural Integrity, 13 (6). pp. 907-921. ISSN 1757-9864

Mohamad Syazwan Zafwan, Mohamad Suffian and Syahiir, Kamil and Ahmad Kamal, Ariffin and Abdul Hadi, Azman and Israr, M Ibrahim and Kazuhiro, Suga (2023) Uncertainty Prediction Output of a Finite Element Model (FEM) Using Surrogate Modelling Approach. In: 7TH SYMPOSIUM ON DAMAGE MECHANICS OF MATERIALS AND STRUCTURES, 19 - 20 September 2023, Bangi Resort Hotel.

Mohamad Syazwan Zafwan, Mohamad Suffian and Syahiir, Kamil and Ahmad Kamal Ariffin, Mohd Ihsan and Abdul Hadi, Azman and Israr, M Ibrahim (2024) Uncertainty Factors of a Finite Element Model using the Fuzzy Analysis Method. Jurnal Kejuruteraan, 36 (1). pp. 123-132. ISSN 2289-7526

Mohamad Syazwan Zafwan, Mohamad Suffian and Syahiir, Kamil and Ahmad Kamal Ariffin, Mohd Ihsan and Abdul Hadi, Azman and Israr, M. Ibrahim and Kazuhiro, Suga (2024) A Surrogate Model's Decision Tree Method Evaluation for Uncertainty Quantification on a Finite Element Structure via a Fuzzy-Random Approach. Journal of Current Science and Technology, 14 (3). pp. 1-15. ISSN 2630-0656

Mohamaddan, Shahrol and Rasit, A.H. and Dawal, S.Z.M. (2018) Design of Mechanical Bracing Device for Clubfoot Treatment. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-16). pp. 91-95. ISSN 2289-8131 (online)

Mohamed, N.H.N and Juneh, H. and Yusof, M. (2011) Testing on Energy Absorption of Banana Fiber Polyester Composite.

Mohammad Amirul, Juma’at (2023) Analysis Of Motor Performance For Dabai Seed Cracking Machine. [Final Year Project Report] (Unpublished)

Mohammad Ashaari, Kiprawi (2020) Development of a Cutting Edge Temperature Measurement Device for End Mill Tool using Infrared Radiation Technique. Masters thesis, UNIVERSITI MALAYSIA SARAWAK (UNIMAS).

Mohammad Ashaari, Kiprawi and Abdullah, Yassin and Syed Tarmizi, Syed Shazali and Shahidul, Islam and Mohd Azrin, Mohd Said (2018) Assessment of Cutting Profile of AISI 1095 by Using Infrared Radiation Approach. International Journal of Engineering & Technology, 7 (3.18). pp. 79-82. ISSN 2227524X

Mohammad Ashaari, Kiprawi and Abdullah, Yassin and Syed Tarmizi, Syed Shazali and Shahidul, Islam and Mohd Azrin, Mohd Said (2017) Study Of Cutting Edge Temperature And Cutting Force Of End Mill Tool In High Speed Machining. MATEC Web of Conferences, 87. ISSN 2261236X

Mohammad Bakhtiar, B. Johari (2006) Feasibility study on implementing modular production system. [Final Year Project Report] (Unpublished)

Mohammad Omar, Abdullah (2019) Applied Energy with Cleaner Environment and Smarter Schemes towards Industry 4.0. In: The International Conference on Innovative Applied Energy (IAPE’19), 14-15 March, 2019, Oxford, United Kingdom.

Mohammad Omar, Abdullah (2012) Essential notes on applied energy : for mechanical and chemical engineering students (objective, practical short questions & sample answers). Universiti Malaysia Sarawak. ISBN 978-967-5527-15-9

Mohammad Rahmat, Bin Derise (2020) Fabrication of Polylactic Acid/Wax/Polyethylene Glycol Composite Filament for Fused Deposition Modeling (FDM). Masters thesis, Faculty of Resource Science & Technology.

Mohammad Zulhafiz, Bin Jenuren (2017) Development of temperature measurement of cutting tool using infrared radiation with optical fiber. [Final Year Project Report] (Unpublished)

Mohammad Zulihsan, Mohamed Marzuki (2004) Shear deformation of chain stitched and tricot stitched non-crimp fabrics. [Final Year Project Report] (Unpublished)

Mohd Azlan, Ismail and Othman, A.K. and Shahidul, Islam and Zen, H. (2014) End Suction Centrifugal Pump Operating in Turbine Mode for Microhydro Applications. Advances in Mechanical Engineering. ISSN 16878140

Mohd Azrin, Mohd Said and Ahmad Faridzul, Japar and Nor Kamaliana, Khamis and Abdullah, Yassin and Ana Sakura, Zainal Abidin and Rudiyanto, Philman Jong and Mohamad Syazwan Zafwan, Suffian and Aishah, Arsad (2020) DESIGN AND DEVELOP LOW-COST DEVICE FOR MONITORING OCCUPATIONAL NOISE EXPOSURE TOWARD WORKERS IN FACTORY. Science International (Lahore), 32 (6). pp. 729-733. ISSN 1013-5316

Mohd Azrin, Mohd Said and Brian Egan, Jackson Tubam and Nor Kamaliana, Khamis and Aishah, Arsad (2020) A Study of Postural Safety and Low-Cost Electromyography (EMG) Device Towards Grocery Workers in Kota Samarahan, Sarawak. Journal of Engineering and Science Research, 4 (4). pp. 1-5. ISSN 2289-7127

Mohd Azrin, Mohd Said and Khairunnisa, Zainuddin and Nor Kamaliana, Khamis (2022) Preliminary Study of Postural Safety and Ergonomics Analysis Related to Cycling Activity. Malaysian Journal of Medicine and Health Sciences, 18 (7). pp. 27-33. ISSN 2636-9346

Mohd Azrin, Mohd Said and Kong, Jing Hui and Nor Kamaliana, Khamis (2022) STUDY OF POSTURAL SAFETY AND MUSCLE ACTIVITY ANALYSIS FOR DEADLIFT EXERCISE IN GYM. Science International (Lahore), 34 (1). pp. 1-5. ISSN 1013-5316

Mohd Azrin, Mohd Said and Mohd Hasanal, Sufri Umar and Nor Kamaliana, Khamis and Aishah, Arsad (2020) A PRELIMINARY STUDY OF POSTURAL SAFETY AND LOW-COST ELECTROMYOGRAPHY (EMG) TOWARDS LOGISTIC WORKERS IN KUCHING SENTRAL. Sci.Int.(Lahore), 32 (6). pp. 661-665. ISSN 1013-5316

Mohd Azrin, Mohd Said and Nor Kamaliana, Khamis and Mohd Anas, Mohd Sabri and Ahmad Rasdan, Ismail (2024) WorkEase Assessment App : Enhancing Worker Safety and Health in the Workplace through Comprehensive Assessment. In: Compilation of Innovative Idea 2024. MNNF Publisher, Negeri Sembilan, Malaysia, pp. 151-155. ISBN 978-967-0052-08-3

Mohd Azrin, Mohd Said and Shawn Felix, Stephen and Nor Kamaliana, Khamis and Abdullah, Yassin and Ana Sakura, Zainal Abidin and Rudiyanto, Philman Jong and Mohamad Syazwan Zafwan, Suffian and Aishah, Arsad (2020) Design and Develop Low-Cost Device on Monitoring Environmental Indoor Air Quality in Factory. Journal of Engineering and Science Research, 4 (4). pp. 6-11. ISSN 2289-7127

Mohd Danial, Bin Ibrahim and Ger, Lian Tan and Lidyana, Binti Roslan and Kashiwabara, Yuki and Jasmine, Jendia and Sunami, Yuta (2019) Numerical and Experimental Analysis on Runner and Gate Positioning for Magnesium Alloy Die-Casted Test Piece. In: 7th Asia Conference on Mechanical and Materials Engineering (ACMME 2019),, 14-17th June 2019, Tokyo, Japan.

Mohd Danial, Bin Ibrahim and Hashimoto, Hiromu (2010) Optimum Design of Thrust Oil Bearing for Hard Disk Drive. In: Proceedings of the 2nd International Conference on Design Engineering and Science, ICDES 2010, 17- 19 November 2010, Tokyo, Japan.

Mohd Danial, Bin Ibrahim and Miyanaga, Norifumi and Nabilah, Binti Ibrahim and Muhamad Fadzli, Bin Ashari and Amir Azam, Khan and Siti Zaharah, Binti Ibrahim (2015) Macro-Surface Modifications of Subsonic Flow on Airplane Winglets. In: Proceedings of the World Engineering Conference and Convention 2015, 29 November - 2 December 2015, Kyoto, Japan.

Mohd Danial, Bin Ibrahim and Mohd Shahril, Bin Osman and Miyanaga, Norifumi and Amir Azam, Khan (2013) Macro-surface Modification through Exploitation of Rivets and Dimples –Numerical and Experimental. In: Proceedings of the 5th World Tribology Congress 2013, 8-13 September 2013, Torino, Italy.

Mohd Danial, Bin Ibrahim and Norliza, Binti Marusman and Sunami, Yuta and Siti Nur Azizah, Binti Amran and Saad Salahuddin, Bin Musa and Ochiai, Masayuki and Su, Shiung Lam (2018) Characteristics of Modified Spiral Thrust Bearing through Geometries and Dimension Modifications. Tribology Online, 13 (6). pp. 334-339. ISSN 1881-2198

Mohd Danial, Bin Ibrahim and Sunami, Yuta and Ochiai, Masayuki and Hashimoto, Hiromu (2010) Measurements of Film Thickness and Pressure Distribution for Optimized Thrust Air Bearing. In: Proceedings of the 2nd International Conference on Design Engineering and Science, ICDES 2010, 17 - 19 November 2010, Tokyo, Japan.

Mohd Danial, Ibrahim and Alyssa Asong, Ananthan and Dayang Salyani, Abang Mahmod and Awang Ahmad Sallehin, Awang Husaini and Ngieng, Ngui Sing and Shunsuke, Nakano and Yuta, Sunami and Pierre, Barroy (2023) Antibacterial Properties of Snakeskin Inspired PDMS Surfaces Layered with Poly-DL-Lactic Acid Nanosheet. In: Proceedings of the ASME 2023 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, 11-13 September 2023, Austin, Texas, USA.

Mohd Danial, Ibrahim and Alyssa Asong, Ananthan and Dayang Salyani, Abang Mahmod and Sunami, Yuta and Barroy, Pierre and Chin, Christie Pei Yee and Syah Runniza, Ahmad Bakri (2023) Friction measurement of modified PDMS surfaces inspired by Malayopython Reticulatus. Biotribology. ISSN 2352-5738 (In Press)

Mohd Danial, Ibrahim and Alyssa Asong, Ananthan and Sunami, Yuta and Barroy, Pierre (2021) Surface Modification Inspired by Malayopython Reticulatus for Friction Control. In: 7th World Tribology Congress 2021, 5th Sept 2021, Lyon, France.

Mohd Danial, Ibrahim and Ger, Lian Tan and Lidyana, Roslan and Kashiwabara, Yuki and Jasmine, Jendia and Sunami, Yuta (2019) Numerical and Experimental Analysis on Runner and Gate Positioning for Magnesium Alloy Die-casted Test Piece. Materials Science Forum, 975. pp. 1-6. ISSN 1662-9752

Mohd Danial, Ibrahim and Hashimoto, Hiromu (2011) Optimum Design of Oil Lubricated Thrust Bearing for Hard Disk Drive. Selected Articles of the 2nd International Conference on Design Engineering and Science, New Progress in Design Engineering and Science. pp. 1-6.

Mohd Danial, Ibrahim and JASMINE, JENDIA and Yuki, Kashiwabara and Lidyana, Roslan and Hitoshi, Watanabe and Yuta, Sunami (2023) Analysis of Fractures and Microstructures on Different Injection Speeds in High-Pressure Die-Casting Magnesium Alloy. INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 15 (5). pp. 123-132. ISSN 2229-838X

Mohd Danial, Ibrahim and Jendia, J. and Kashiwabara, Y. and Roslan, L.B. and Watanabe, H. and Sunami, Yuta (2023) Analysis of Fractures and Microstructures on Different Injection Speeds in High-Pressure Die-Casting Magnesium Alloy. The International Journal of Integrated Engineering, 15 (5). pp. 123-132. ISSN 2229-838X

Mohd Danial, Ibrahim and Jendia, J. and Kashiwabara, Y. and Sunami, Y. (2023) Parametric Study for Runner Modifications of Die Casted Part with Venting Systems. The International Journal of Integrated Engineering, 15 (5). pp. 84-90. ISSN 2229-838X

Mohd Danial, Ibrahim and M. Z., Mohtar and A. A., Alias and L. K., Wong and Y. S., Yunos and M. R. A., Rahman and A., Zulkharnain and C. S., Tan and R., Thayan (2016) Air Flow Optimization of Discharge Duct based on Peregrine Falcon’s Diving Wing Shape for Forward Curve Centrifugal Blower. Journal of Advanced Research in Applied Sciences and Engineering Technology. pp. 1-4. ISSN 2462-1943

Mohd Danial, Ibrahim and Namba, Tadashi and Ochiai, Masayuki and Hashimoto, Hiromu (2010) Optimum Design of Thrust Air Bearing for Hard Disk Drive Spindle Motor. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 4 (1). pp. 70-81. ISSN 1884-8354

Mohd Danial, Ibrahim and Norliza, Marusman and Aidil Azli, Alias and Siti Nur Azizah, Amran and Saad Salahuddin, Musa and Mohd Rahmat, A Rahman and Yana Shaheere, Yunos and Muhammad Zaidi, Mohtar and Wong, Lee Kwang and Sunami, Yuta and Ochiai, Masayuki (2017) Characteristic of Modified Spiral Bearing and its Seals Effect through Geometries and Dimension Modification. In: Proceedings of the World Tribology Congress 2017, 17- 22 September 2017, Beijing, China.

Mohd Danial, Ibrahim and Norliza, Marusman and Sunami, Yuta and Aidil Azli, Alias and Ochiai, Masayuki and Siti Nur Azizah, Amran and Saad Salahuddin, Musa and Mohd Rahmat, A. Rahman and Yana Shaheere, Yunos and Mohd Zaidi, Mohtar and Wong, Lee Kwang (2017) Characteristics of Modified Spiral Bearing and Its Seals Effect through Geometries and Dimension Modification. In: World Tribology Congress, 17-22 September 2017, Beijing, China.

Mohd Danial, Ibrahim and Ong, J. H. and Ahmad Adzlan Fadzli, Khairi (2012) HDDs with Better Heat Dissipation Systems Designed for Search Engines Servers. In: 5th Engineering Conference, "Engineering Towards Change - Empowering Green Solutions, 10-12th July 2012, Kuching Sarawak.

Mohd Danial, Ibrahim and S. N. A., Amran and Y. S, Yunos and A. Rahman, M. R. and Mohtar, M. Z. and Wong, L. K. and Azham, Zulkharnain (2018) Drag-Reduction Study and its Dynamic Characteristics on Recreational Speedboat Utilizing Simplified Shark Skin Design. International Journal of Engineering & Technology, 7 (3.7). pp. 460-463. ISSN 2227-524X

Mohd Danial, Ibrahim and S.A., Najamudin and S.S., Lam (2022) Steam System Optimization at Palm Oil Mill: Case Study in Sabah, Malaysia. Journal of Optimization in Industrial Engineering, 15 (2). pp. 87-97. ISSN 2423-3935

Mohd Danial, Ibrahim and Sitti Aishah, Najamudin and Dayang Salyani, Abang Mahmod and Barroy, Pierre and Cantaluppi, Anna and Lejeune, Michaël and Zeinert, Andreas and Sunami, Yuta (2021) Poly-DL-Lactic Acid (PDLLA) Nanosheet Thin Films for Biomedical, Bioengineering and Energy Saving Applications. In: 7th World Tribology Congress 2021, 5th Sept 2021, Lyon, France.

Mohd Danial, Ibrahim and Zalikha Farhah, Ismail (2023) Pump System Optimization through Pumping System Assessment Tool (PSAT): Case studies in Johor and Sarawak Manufacturing Plants. Masters thesis, Universiti Malaysia Sarawak.

Mohd Danial, bin Ibrahim and S. N. A., Amran and Azham, bin Zulkharnain and Sunami, Yuta (2018) Streamlined vessels for speedboats: Macro modifications of shark skin design applications. In: AIP Conference Proceedings, 1 - 2 November 2017, University of Electro-Communications (UEC)Tokyo, Japan..

Mohd Danial, brahim and S., Zainal and Al-Khalid, Othman (2018) Low Cost Solar Powered Telecenters for Malaysian Rural Areas : Case Study in Pos Sinderut, Pahang, Malaysia. International Journal of Engineering & Technology, 7 (4.14). pp. 421-425. ISSN 2227-524X

Mohd Hazrul Azli, Abu Bakar (2010) Design and fabrication of rice milling machine for paddy farmers at Samarahan, Sarawak. [Final Year Project Report] (Unpublished)

Mohd Jalani, M.F (2008) Application of oil palm empty fruit bunch composite as an eco-efficient product. [Final Year Project Report] (Unpublished)

Mohd Nurfirdaus, Mohiddin and Abu, Saleh Ahmed and Reddy, Amarnadh N.R. and Sinin, Hamdan (2020) Turritella terebra Shell Synthesized Calcium Oxide Catalyst for Biodiesel Production from Chicken Fat. Materials Science Forum, 997. pp. 93-101. ISSN 1662-9752

Mohd Nurul Iman, Mohd Fouzi (2020) DEVELOPMENT OF COMPACT LASER GLUCOMETER FOR DIABETES SCREENING AND MONITORING. [Final Year Project Report] (Unpublished)

Mohd Rahmat, Bin A Rahman (2019) Modelling of Casting Shots in Industrial Mold of High Pressure Die Casting. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Mohd Rosli, Mohamad (2021) Experiment and Simulation of High Pressure Die Casting Using ADC12 Aluminium alloy for Porosity Defect Prediction. Masters thesis, Universiti Malaysia Sarawak.

Mohd Saiful, Islam and Hamdan, S. and Rusop, M. and Rahman, M.R. (2013) Mechanical and Morphological Properties of Tropical Wood Polymer Nanocomposite (WPNC). In: International Conference on Nanoscience and Nanotechnology 2011, NANO-SciTech 2011, 2 March 2011 through 3 March 2011, Shah Alam, Selangor; Malaysia.

Mohd Sanusi, Abdul Aziz and Takashi, Ueda and Abdullah, Bin Yassin (2012) Study on Machinability of Laser Sintered Materials Fabricated By Layered Manufacturing System: Influence of Different Hardness of Sintered Materials. Procedia CIRP, 4. pp. 79-83. ISSN 2212-8271

Mohd Shahrieel, Mohd Aras and S. S., Abdullah and Siti Saudah, Shafei (2012) Investigation and Evaluation of Low cost Depth Sensor System Using Pressure Sensor for Unmanned Underwater Vehicle. Majlesi Journal of Electrical Engineering, 6 (2). pp. 1-12. ISSN 2345-3796

Mohd Syahmi, Jamaludin and Hanafusa, Akihiko and Shinichirou, Yamamoto and Agarie, Yukio and Otsuka, Hiroshi and Ohnishi, Kengo (2019) Development of an Evaluation System for Magnetic Resonance Imaging Based Three-Dimensional Modeling of a Transfemoral Prosthetic Socket Using Finite Elements. Appl. Sci., 9 (18). pp. 1-16. ISSN 2076-3417

Mohd Zamzuri, Ab Rashid and M. S. M.`, Aras and Mohd Azmin, Kassim and Zawawi, Ibrahim and Annisa, Jamali (2012) Dynamic Mathematical Modeling and Simulation Study of Small Scale Autonomous Hovercraft. International Journal of Advanced Science and Technology, 46. pp. 95-114. ISSN 2005-4238

Mohd Zamzuri, Ab Rashid and Mohd Shahrieel, Mohd Aras and A. A., Radzak and Anuar, Mohamed Kassim, and Annisa, Jamali (2012) Development of Hexapod Robot with Manoeuvrable Wheel. International Journal of Advanced Science and Technology, 49. pp. 119-136. ISSN 2005-4238

Mohd. Baharudin, Bin Abdullah (1997) Research on voice communication over optical fiber digital link. [Final Year Project Report] (Unpublished)

Mohd. Nuramin, Bin Masli (2017) Study of butylal as fuel additive on diesel engine performance and emission characteristics. [Final Year Project Report] (Unpublished)

Mohd. Rizal, Abdul Rashid (2002) The feasibility study of the implementation and utilization of photovoltaic and wind energy at Teluk Melano. [Final Year Project Report] (Unpublished)

Mohd. Shauqi, Bin Isa (2017) Development of an automated machine for drying lemantak. [Final Year Project Report] (Unpublished)

Muhamad Arif, Ismail (2016) Extraction of chitin and chitosan from local resources. [Final Year Project Report] (Unpublished)

Muhammad, Adamu and Md. Rezaur, Rahman and Sinin, Bin Hamdan and Muhammad Khusairy, Bin Bakri and Fahmi Asyadi, Bin Md Yusof (2020) Impact of polyvinyl alcohol/acrylonitrile on bamboo nanocomposite and optimization of mechanical performance by response surface methodology. Construction and Building Materials, 258. ISSN 0950-0618

Muhammad, Adamu and Sinin, Hamdan and Md. Rezaur, Rahman (2020) Bamboo Nanocomposite: Impact of Poly (Ethylene-alt-Maleic Anhydride) and Nanoclay on Physicochemical, Mechanical, and Thermal Properties. Bioresource, 15 (1). ISSN 1930-2126

Muhammad Ammar Asyraf, Bin Zainuddin (2017) Effect of butyrate glycerine on diesel engine performance and emission characteristics. [Final Year Project Report] (Unpublished)

Muhammad Hasbollah, Hassan (2023) INTELLIGENT MODELLING OF GRADIENT FLEXIBLE PLATE STRUCTURE UTILISING HYBRID EVOLUTIONARY ALGORITHM. Masters thesis, Universiti Malaysia Sarawak.

Muhammad Maula, Nordin (2017) The design of buildable low cost automated cat pet feeder using Arduino UNO starter kit. [Final Year Project Report] (Unpublished)

Muhammad Nabil, Bin Has-bullah (2017) Development of automated cloth hanger. [Final Year Project Report] (Unpublished)

Muhammad Naim, Bin Leman (2019) Development of A Convection Dryer for Sliced Fish Cracker. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Muhammad Naim, Leman and Shahrol, Mohamaddan and Ana Sakura, Zainal Abidin and Mohamad Syazwan Zafwan, Mohamad Suffian and Khairul Fikri, Tamrin and Rubiyah, Baini and Akihiko, Hanafusa (2021) Development of Batch Type Convection Dryer for Fish Cracker Manufacturing. In: The International Conference on Intelligent Manufacturing and Energy Sustainability (ICIMES-2021), June 18– 19, 2021, Hyderabad.

Muhammad Naim, Leman and Shahrol, Mohamaddan and Mohamad Syazwan Zafwan, Mohamad Suffian and Abang Mohamad Aizuddin, Abang Mohd Mohtar (2016) Development of Control System for Keropok Keping Drying Machine. MATEC Web of Conferences, 87. ISSN 2261236X

Muhammad Nazirul, Bin Hamdan (2017) Development of sensor measuring module as the payload on unmanned aerial vehicles (UAV) in environmental monitoring. [Final Year Project Report] (Unpublished)

Muhammad Na’im, Suhaili (2023) The Analysis Of Motor Performance For Pitting Dabai Fruit (Canarium Odontophyllum). [Final Year Project Report] (Unpublished)

Muhammad Syukri Imran, Abdullah and Azhaili, Baharun and Siti Halipah, Ibrahim and Wan Azlan, Wan Zainal Abidin (2017) Evaluation of low cost radiant cooling panel in a test room with passively cooled water. Journal of Advances in Technology and Engineering Studies, 3 (5). pp. 211-223. ISSN 2414-4592

Muhammad Syukri Imran, Abdullah and Azhaili, Baharun and Siti Halipah, Ibrahim and Wan Azlan, Wan Zainal Abidin (2016) Nocturnal Cooling of Water as Free Cooling Source for Building Indoor Radiant Cooling in Malaysian Climate. Applied Mechanics and Materials, 833. pp. 94-101. ISSN 1662-7482

Muhammad Yazid, Mohamad Fuad (2020) IMPLEMENTATION OF STANDARDIZED WORK IN LOCAL AUTOMOTIVE INDUSTRY. [Final Year Project Report] (Unpublished)

Muhammad Zaidi, Mohtar (2018) Analysis of Blower Inside Biosafety Cabinet Class II A2 Using Computational Fluid Dynamics and Experimental Verifications. Masters thesis, Universiti Malaysia Sarawak.

Muhammad ‘Abid Ira, Irawan and Mohd Fairus, Mohd Yasin and Khairul Fikri, Tamrin (2020) Modelling of Water-Assisted Flame Synthesis of Carbon Nanotube using Counterflow Diffusion. Journal of Advanced Research in Materials Science, 66 (1). pp. 1-7. ISSN 2289-7992

Muhammed Nazri, Bin Mustapha (2000) Photovoltaic cell usage in Sarawak. [Final Year Project Report] (Unpublished)

Muhd Rahiza Afiela, Bin Abd. Rahman (2002) Design of solar cooker. [Final Year Project Report] (Unpublished)

Murni, Binti Mohd Mokhtar (2000) Laminar transition to turbulent in design of open channel flow. [Final Year Project Report] (Unpublished)

Mustafa Kamal, M. and Baini, R. and Lim, S. F. and Rahman, M. R and Mohamaddan, S. and Hussain, H. (2019) Drying effect on the properties of traditionally processed sago starch. International Food Research Journal, 26 (6). pp. 1861-1869.

Mustafa Kamal, M. and Rubiyah, Baini and Shahrol, Mohamaddan and Henry Ragai, A.R. and Soh Fong, L. and Abdul Rahman, N. and Mili, N. and Siti Noor Linda, Taib and Othman, A.K. and Mohammad Omar, Abdullah (2016) Comparisons of the physicochemical and functional properties of commercially and traditionally processed sago starch. MATEC Web of Conferences, 87. ISSN 2261236X

Muzalina, Zakaria (1997) Design and implementation of digital optical link. [Final Year Project Report] (Unpublished)

N

NG, JI WEI (2020) STUDY ON THE PUSH COATING FOR A LARGER MODULE OF ACTIVE LAYER FILMS. [Final Year Project Report] (Unpublished)

NGU, SU HANG (2023) Lettuce Leaf Disease Detection Using Convolutional Neural Network Algorithm. [Final Year Project Report] (Unpublished)

NUR SOFIANI, MOHD YUSOF (2019) DESIGN OF A MULTI-SPINDLE IMPACT WRENCH MECHANISM. [Final Year Project Report] (Unpublished)

Nadzrin Ahmed, Bin Fasihuddin (2017) Fabrication and mechanical properties of cellulose nanofiber reinforced polyvinyl alcohol composites. [Final Year Project Report] (Unpublished)

Nafisa, Tamanna and Norsuzailina, Mohamed Sutan and Ibrahim, Yakub and Teo, Delsye Ching Lee and Ezzaq Farhan, Ahmad (2015) Influence of Mortar Incorporating Silica Based Waste Material on the Formation of C-S-H and Mechanical Strength Properties. Applied Mechanics and Materials, 695. pp. 647-650. ISSN 1662-7482

Nagaratnam, Brabha H and Faheem, Ahmed and Muhammad Ekhlasur, Rahman and Mohammad Abdul, Mannan and Leblouba, Moussa (2015) Mechanical and durability properties of medium strength self-compacting concrete with high-volume fly ash and blended aggregates. Periodica Polytechnica: Civil Engineering, 59 (2). pp. 155-164. ISSN 05536626

Nakano, Shunsuke and Zhang, Sheng and M. Danial, Ibrahim and Sunami, Yuta (2020) Tribology Characteristics between Polymner Nanosheets and Human Skin. In: Conference on Information Storage and Processing Systems ISPS 2020, June 25-26, 2020, Milipitas , CA, USA.

Nakano, Shunsuke and Zhang, Sheng and Mohd Danial, Bin Ibrahim and Sunami, Yuta and Hashimoto, Hiromu (2018) Tactile Sliding Behavior on Biomedical Devices in Skin Application of PDLLA Ultrathin Film Produced by Roll-to-Roll Production Method. In: Proceedings of the Autumn Tribology Conference Ise, 2018, 7-9th November 2018, Ise Tourism and Culture Center, Japan.

Namba, T. and Ibrahim, M.D and Hashimoto, Hiromu (2010) Optimum Design of Groove Geometry for Thrust Bearing with Weight Factor Consideration. In: Japanese Society of Tribologists, Tribology Conference 2010, 17-19 May 2010, Tokyo, Japan.

Namba, T. and Ibrahim, M.D and Ochiai, M. and Hashimoto, H. (2008) Characteristics Analysis and Optimum Design of Small Size Thrust Air Bearing for HDD-Application to Optimum Design. In: Proc. of the Mechanical Engineering Congress, 2008 Japan (MECJ-08), 3-7 Aug 2008, Yokohama National University, Japan.

Namba, T. and Ibrahim, M.D and Ochiai, M. and Hashimoto, H. (2009) Measurement of Film Thickness for Air Thrust Air Bearing with Temperature Consideration on Bearing Surface. In: Proc. of the Japanese Society of Tribologists, Tribology Conference Tokyo, 18-20 May 2009, Tokyo, Japan.

Nazril bin, Mohd Najib (2004) Application of axiomatic design to the toaster design - a case study. [Final Year Project Report] (Unpublished)

Nazrul Irfan, Bin Abdul Rahman (2017) Force analysis of automotive double wishbone suspension systems. [Final Year Project Report] (Unpublished)

Ng, Wee Meng (2002) Mechanical design of six legged walking robot. [Final Year Project Report] (Unpublished)

Ngu, S.H (2004) In-process surface roughness recognition (ipsrr) system using acoustic emission (ae), part II. [Final Year Project Report] (Unpublished)

Nicholas Kuan Hoo, Tien and Tan, Ming Yee and Mohamad Zaki, Hassan and Mohamed Yusoff, Mohd Zuhri (2022) Evaluation of Physico-Mechanical Properties on Oil Extracted Ground Coffee Waste Reinforced Polyethylene Composite. Polymers, 14 (21). ISSN 2073-4360

Noamie, Anak Balai (2017) Automatic hand wash. [Final Year Project Report] (Unpublished)

Noor, N.M and Yahaya, N. and Ozman, N.A.N and Othman, S.R (2010) The Forecasting Residual Life of Corroding Pipeline based on Semi-Probabilistic Method. UNIMAS e-Journal of Civil Engineering, 1 (2).

Noor Hisyam, Noor Mohamed and Hasmiryadie, Juneh and Mahshuri, Yusof (2011) Testing on Energy Absorption of Banana Fiber Polyester Composite. Journal Applied Mechanics and Materials, 117-19. pp. 873-875. ISSN 1662-7482

Noor Juwita, Binti Junaiddi (2017) To study the potential of coconut fiber as soundproofing product. [Final Year Project Report] (Unpublished)

Noor Zaniza Wati, Zainol (2005) Thermal properties of tile and marble. [Final Year Project Report] (Unpublished)

Nor Aeshah, Abdul Hamid. (2002) The effect of copper pipe length and diameter to solar water heating system. [Final Year Project Report] (Unpublished)

Noraini, Asakil (2006) Finite elements on bond strenght of adhesive / polymeric composites system. [Final Year Project Report] (Unpublished)

Noraship, M.R (2008) Application of axiomatic design concepton improving ladder for pepper harvesting. [Final Year Project Report] (Unpublished)

Noraziah, Binti Abdul Wahab (2008) Renewable energy from palm oil mill effluent (Pome) using microbial fuel cell. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Norazlina, Bateni and Rosmina, Ahmad Bustami and Al Sidqi, Hassan and Dyangku Salma, Awang Ismail and Md Abdul, Mannan and Mohammad Sapian, Mohamed Kasim and Mohd Zaidi, Serah (2023) Transforming Physical Hands-on Laboratory Practice to Remote Laboratory Experimentation : A COVID-19 Experience. In: Real Application of Transformative Approaches for Teaching and Learning in the 21st Century. UNIMAS Publisher, Kota Samarahan, Sarawak, pp. 47-57. ISBN 978-967-0054-23-0

Norfadzlan, Bin Yusup (2012) Artificial bee colony in optimizing process parameters of surface roughness in end milling and abrasive waterjet machining. [Final Year Project Report] (Unpublished)

Norfadzlan, Yusup and Arezoo, Sarkheyli and Azlan, Mohd Zain and Siti Zaiton, Mohd Hashim and Norafida, Ithnin (2013) Estimation of optimal machining control parameters using artificial bee colony. Journal of Intelligent Manufacturing, 25 (6). pp. 1463-1472. ISSN 1572-8145

Norhayati, Yahaya. (2004) Mechanical properties of bemban fibres composites. [Final Year Project Report] (Unpublished)

Norlelawaty, Osman (2009) Vibration analysis on a bearing using shock pulse measuring techniques. [Final Year Project Report] (Unpublished)

Norman Baggio, Francis (2018) Development Of Preliminary Design For Tidal Power Plant At Kuching Barrage. [Final Year Project Report] (Unpublished)

Norsuzailina, Mohamed Sutan (2017) Innovative Solutions for Engineering and Technology Challenges. UNIMAS Publisher, Universiti Malaysia Sarawak. ISBN ISBN 978-967-2008-36-1

Norsuzailina, Mohamed Sutan and Ibrahim, Yakub and Hebron, Jau (2013) Physical and Mechanical Properties of Industrial Waste Modified Mortar. [Working Paper]

Norsuzailina, Sutan and Habibur Rahman, Sobuz and Ehsan, Ahmed (2011) Deflection and cracking behavior of RC beams externally reinforced with carbon fiber laminates. Journal of Reinforced Plastics and Composites, 30 (21). pp. 1807-1818. ISSN 1530-7964

Nur Adilah, Binti Ahmad (2017) Portable smartphone-based laser glucometer for non-invasive measurement of glucose level of diabetic patients. [Final Year Project Report] (Unpublished)

Nur Aisya Affrina, Mohamed Ariffin and Lee, Chiew Tin and Arunkumar, Thirugnanasambandam and Wong, King Jye and William Chong, Woei Fong (2024) Triboelectric Performance of Ionic Liquid, Synthetic, and Vegetable Oil-Based Polytetrafluoroethylene (PTFE) Greases. Lubricants, 12 (8). p. 272. ISSN 2075-4442

Nur Aisya Affrina, Mohamed Ariffin and Lee, Chiew Tin and Lee, Mei Bao and Izzati, Halid and Siti Hartini, Hamdan and Muhammad Izzal, Ismail and William Chong, Woei Fong and Hedong, Zhang (2024) Enhancing boundary friction and wear reduction through adsorption control in protic ionic liquid and carbon mixtures. Journal of Materials Science, 59 (3). pp. 794-809. ISSN 1573-4803

Nur Mehranie, Binti Shamsul Bahri (2017) Mechanised slicing tools for Sarawak layered cake. [Final Year Project Report] (Unpublished)

Nur Nadia, Binti Hamri (2017) Study on potential coconut fiber as shock absorbing product. [Final Year Project Report] (Unpublished)

Nur Sharzaina Hanum, Binti Sekiun (2017) Study of the effect of hydrodynamic, electrostatic and magnetic forces on the non-thermal plasma (NTP) injection in the crude oil. [Final Year Project Report] (Unpublished)

Nur Syahina, Yahya and Gaddafi, Ismaili (2015) Mechanical Properties of Endospermum diadenum sp. Grown in Sarawak. International Advanced Research Journal in Science, Engineering and Technology, 2 (11). pp. 139-143. ISSN 2393-8021

Nur Syahina, Yahya and Gaddafi, Ismaili and Meekiong, Kalu and Mohd Effendi, Wasli and Iskanda, Openg and Noor Azland, Jaimudin and Mohamad Zain, Hashim and Ahmad Nurfaidhi, Rizalman and Hamden, Mohammad and Khairul Khuzaimah, Abdul Rahim (2023) The Mechanical Strength Properties, Treatability Retention and Hazard Classification of Treated Small-Clear Fast-Growing Acacia mangium Superbulk at Different Age Groups. Forests, 14 (8). pp. 1-16.

Nurashidah, Azman (2020) Developing Maneuvering System For Drone Using Raspberry Pi. [Final Year Project Report] (Unpublished)

Nurdiyana, Zakariah (2018) Effects Of Chemical Treatment On The Mechanical Properties Of Sugarcane Bagasse / Urea Formaldehyde Particleboard. [Final Year Project Report] (Unpublished)

Nurfairuz Nadirah, Binti Affandi and Khairul Fikri, Bin Tamrin and Amir Azam, Khan and Moghadasi, Kaveh and Mohd Ridzuan, Bin Mohamad Sharip and Shahrol, Mohamaddan and Anamul, Hossain (2020) A Feasibility Study of Low-Power Laser Trepanning Drilling of Composite Using Modified DVD Writer. International Journal Of Integrated Engineering, 12 (3). pp. 187-196. ISSN 2229-838X

Nurhanna Zulaikha, Binti Ishak (2019) Development of Ankle Foot Orthosis (AFO) Using Pneumatic Artificial Muscle (PAM). Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Nurhanna Zulaikha, Ishak and Shahrol, Mohamaddan and Annisa, Jamali and Shinichiro, Yamamoto and Helmy, Hazmi and Yee, Low Cheng and Akihiko, Hanafusa (2021) Experimental Analysis of Ankle Foot Orthosis Using Pneumatic Artificial Muscle. In: 11th Asian-Pacific Conference on Medical and Biological Engineering, May 25-27, 2020, Okayama Convention Center, Japan.

Nursyamil Haziq, Ahmad (2018) Bioethanol From Ubi Gajah As A Fuel Additive For Engine. [Final Year Project Report] (Unpublished)

Nurul Hayati, Jamil (2004) Biomass potiential enegry from agricultural wastes. [Final Year Project Report] (Unpublished)

Nutthachai, Pongprasert and Surisa, Phornvillay and Pornpan, Lekkham and Suwanan, Yodsarn and Varit, Srilaong (2024) 1-MCP microbubbles reduce chlorophyll degradation and maintain the quality of Dendrobium cv. Burana Jade orchid flowers. Scientia Horticulturae, 327. pp. 1-7. ISSN 1879-1018

O

Omar Qaiyum, Bin Sulaiman (2008) Analysis of wood waste composite. [Final Year Project Report] (Unpublished)

Ong, Thiam Eng (2001) A real variable boundary element method for two-dimentional thermal analysis in isotropic and homogeneous. [Final Year Project Report] (Unpublished)

Ooi, Han Hooi (2004) The study on machining (turning process) for aluminium alloy. [Final Year Project Report] (Unpublished)

P

PATRICK RENALDO, RICHARD (2019) EVALUATION OF ELECTROPHORETIC DEPOSITION OF MULTI-WALLED CARBON NANOTUBES ONTO CARBON FIBER. [Final Year Project Report] (Unpublished)

Paul Marcos, Aeron (2010) Cooling system for kampung house. [Final Year Project Report] (Unpublished)

Perry Law, Nyuk Khui (2022) Synthesis, Characterization and Optimization of Carbon Micro-Nano Filler and its Bio-composites. Masters thesis, UNIVERSITY OF MALAYSIA SARAWAK.

Peter Anderson, anak Joseph (2005) Construction of a crack growth testing apparatus associated with stress corrosion cracking (SCC) study. [Final Year Project Report] (Unpublished)

Porle, A.R (2004) Off-line signature verification using backpropagation technique. [Final Year Project Report] (Unpublished)

Prashobh, Karunakaran and Mohammad Shahril, Osman (2013) A study into the feasibility of consumers triggering factory robots to start production over the internet to optimize the current purchasing system. Journal of Manufacturing Engineering, 8 (2). pp. 71-74. ISSN 0022-1817

R

R., Salim and Syed Tarmizi, Bin Syed Shazali and Sinin, Bin Hamdan and Magdalene, Anak Andrew Munot and A. M. A. A. M., Mohtar (2018) A Review on Ruben’s Tube as Acoustic Propagator. International Journal of Automotive and Mechanical Engineering, 15 (4). pp. 6025-6033. ISSN 2180-1606

Rahaini, Mohd Said and Mohamad Ridzuan, Mohamad Kamal and Nor Hafizah, Hussin and Sinarwati, Mohamad Suhaili and Siti Haryanti, Hairol Anuar and Adam, Samsuddin and Nurul Hajar, Mohd Yussoff and Eko Arip, Winanto (2024) Modeling and Prediction of The Mechanical Properties of Feedstock by Cooling-Slope Casting Process using MOJaya Algorithm. Journal of Advanced Research in Applied Mechanics, 121 (1). pp. 13-26. ISSN 2289 - 7895

Rahim Noor, Yusuf (2018) Phase Analyisis Of KNN Type Piezoelectric Material. [Final Year Project Report] (Unpublished)

Rahman, M.R. and Hamdan, S. and Islam, M.S. and Saleh, A.A. (2012) Influence of nanoclay/phenol formaldehyde resin on wood polymer nanocomposites. Journal of Applied Sciences, 12 (14). pp. 1481-1487.

Ramfauzan, Ramlee (2006) Design and fabrication of ice crusher. [Final Year Project Report] (Unpublished)

Ramie, anak Punas. (2005) Experimental studies on biomass combustion to produce energy. [Final Year Project Report] (Unpublished)

Rani, Anak Kaba (2006) Vibration properties of wood. [Final Year Project Report] (Unpublished)

Rashidah, Salim (2020) Experimental and Numerical Investigation to Visualizing Gas Standing Waves of Air and Propane and the Effect on Smaller and Bigger Diameter Tube with Acoustic Propagator. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Ratchel, Anak Edward. (2010) Electricity savings by implementing energy efficiency standards and labels for household air conditioners in Malaysia. [Final Year Project Report] (Unpublished)

Raudhah, Ahmadi and Nurulasma, A I Zainudin and Ismanizan, Bin Ismail and Mannan, M.A. and Ana Sakura, Zainal Abidin (2016) Micro Fine Sized Palm Oil Fuel Ash Produced Using a Wind Tunnel Production System. Advances in Materials Science and Engineering, 2016. pp. 1-6. ISSN 1687-8434

Raudhah, Ahmadi and Saiful, M.S. and Zawawi, D.F. and Sonia, Z A Rahman (2016) Production and Characterisation of Microfine Sized Palm Oil Fuel Ash (POFA) Originated from Bau, Lundu Palm Oil Mill. MATEC Web of Conferences, 87. ISSN 2261236X

Razali, N.T (2006) Creep behaviour of donax grandis fibre-reinforced polymer composites in hygric condition. [Final Year Project Report] (Unpublished)

Reddy, A. N.R. and Abu Ahmed, Saleh and Md Saiful, Islam and Sinin, Hamdan and Md Rezaur, Rahman and Haji Hassan, Masjuki (2018) Experimental evaluation of fatty acid composition influence on Jatropha biodiesel physicochemical properties. Journal of Renewable and Sustainable Energy, 10 (1). ISSN 19417012

Reddy, Anr and Aa, A. Saleh and Md Saiful, Islam and Sinin, Hamdan (2016) Active Heterogeneous CaO Catalyst Synthesis from Anadara granosa (Kerang) Seashells for Jatropha Biodiesel Production. MATEC Web of Conferences, 87. ISSN 2261-236X

Reddy, Anr and Abu Saleh, Ahmed and Islam, M.D. and Sinin, Hamdan (2015) Methanolysis of Crude Jatropha Oil using Heterogeneous Catalyst from the Seashells and Eggshells as Green Biodiesel. ASEAN Journal on Science and Technology for Development, 32 (1). pp. 16-30. ISSN 0217-5460

Reddy, Anr and Ahmed, A.S. and Md. Saiful, Islam and Sinin, Hamdan (2015) Biodiesel Synthesis From Crude Jatropha Oil Using An Active Heterogeneous Nano Catalyst: An Optimized Process. In: Fundamental Science Congress 2015, Universiti Putra Malaysia.

Reddy, Anr and Saleh, A.A. and Islam, M.S. and Sinin, Hamdan (2017) Active Razor Shell CaO Catalyst Synthesis for Jatropha Methyl Ester Production via Optimized Two-Step Transesterification. Journal of Chemistry, 2017. ISSN 20909063

Reddy, Anr and Saleh, A.A. and Md Saiful, Islam and Sinin, Hamdan (2017) Optimization of transesterification parameters for optimal biodiesel yield from crude jatropha oil using a newly synthesized seashell catalyst. Journal of Engineering Science and Technology, 12 (10). pp. 2723-2732. ISSN 1823-4690

Ricky, Stu Anding (2009) A study of biodiesel production from algae. [Final Year Project Report] (Unpublished)

Rimes, C.R (2009) Implementation of group technology in local manufacturing industry. [Final Year Project Report] (Unpublished)

Roslan, L. and Ibrahim, M.D (2018) Flow Simulation and Experiment for Preventing Defects in Die Casting. In: Japan Die Casting Congress, 8-10 Nov 2018, Japan.

Rosliana, binti Rusli (2004) Performance of metered dose inhaler (MDI) and spray characteristics. [Final Year Project Report] (Unpublished)

Rudiyanto, Philman Jong and Muhamad Irfan, Ahmad Shayuri and Abdullah, Yassin and Abang Mohammad Nizam, Abang Kamaruddin (2023) Thermal Performance Evaluation of a Small-Scale Drying Machine for Palm Oil Mill Sludge. International Journal of Integrated Engineering, 15 (5). pp. 6-12. ISSN 2229-838X

Rudiyanto, Philman Jong and Osman, Kahar (2019) Estimation of mitral valve degenerative behavior with mitral regurgitation. Borneo International Journal, 2 (2). pp. 1-15. ISSN 2636-9826

S

S. Zaharah, Binti Ibrahim and M. Shahril, Bin Osman and Miyanaga, Norifumi and Amir Azam, Khan and Mohd Danial, Bin Ibrahim (2013) Application of Surface Modification for Airplane Winglets. In: Proceedings of the 40th Leeds-Lyon Symposium on Tribology & Tribochemistry Forum 2013, 4-6 September 2013, Lyon, France.

SITTI AISHAH, NAJAMUDIN (2019) STEAM SYSTEM OPTIMIZATION AT PALM OIL MILL : CASE STUDY IN SABAH, MALAYSIA. [Final Year Project Report] (Unpublished)

SURAYA, ZULKEFLI (2019) INFLUENCE OF PROPANOL AS ADDITIVE WITH DIESEL KARANJA BIODIESEL BLEND FUEL FOR DIESEL ENGINE. [Final Year Project Report] (Unpublished)

Saad Salahuddin, Bin Musa and Mohd Danial, Bin Ibrahim and Rudiyanto, Bin Philman Jong (2018) Modified Turning Vanes in Air Distribution System of HVAC for Thermodynamics Lab. International Journal of Engineering & Technology, 7 (3.7). pp. 482-485. ISSN 2227-524X

Saiful Adli, Bin Yaman (2006) Flexural test of untreated elais guineesis polymer composites. [Final Year Project Report] (Unpublished)

Saiful Bahari, Bin Hj Mohd Yusoff and Sinin, Bin Hamdan and Zalina, Binti Ibrahim (2012) Techniques and Sequence of Sketching in the Conceptual Phase of Automotive Design. International Journal of Academic Research in Business and Social Sciences, 2 (1). pp. 1-8. ISSN 2222-6990

Sakinah, Abdul Manaf (2000) Solar powered bicycle shape design with the implimentation of ergonomic and aerodynamic. [Final Year Project Report] (Unpublished)

Saleh, A.A. and Reddy, A. N.R. and Nadia, N.A. and Charyulu, K. and Hamdan, S. (2019) Evaluation of ubi gajah for bioethanol via Hydrolysis and fermentation. Malaysian Applied Biology, 48 (5). pp. 59-65. ISSN 0126-8643

Samo, Kamran and Rigit, Andrew Ragai Henry and Baharun, Azhaili (2021) The Development of a Preliminary Design for a TidalEnergy Plant. Engineering, Technology & Applied Science Research, 11 (1). pp. 6730-6733. ISSN 1792-8036

Samo, Kamran Ahmed and Samo, Imran Ahmed and Mughal, Waqas and Rigit, Andrew Ragai Henry and Sohoo, Arslan Ahmed (2020) Suitable Turbine Selection based on the Parameters of a Potential Site at Sarawak, Malaysia. Engineering, Technology & Applied Science Research, 10 (6). pp. 6399-6402. ISSN 1792-8036

Samsudin, Bin Sulaiman (1999) Analysis of the Francis turbine operation using computational fluid dynamics. [Final Year Project Report] (Unpublished)

Saravana, Kannan Thangavelu and Abu Saleh, Ahmed and Ani, F.N. (2014) Application of ANN to Predict S.I. Engine Performance and Emission Characteristics Fuelled Bioethanol. Applied Mechanics and Materials, 554. pp. 454-458. ISSN 1662-7482

Saravana, Kannan Thangavelu and Abu Saleh, Ahmed and Ani, F.N. (2013) Energy Efficient Microwave Irradiation of Sago Bark Waste (SBW) for Bioethanol Production. Advanced Materials Research, 701. pp. 249-253. ISSN 1662-8985

Saravana, Kannan Thangavelu and Abu Saleh, Ahmed and Ani, F.N. (2016) Performance of Petrol Engine using Gasoline–Ethanol–Methanol (GEM)Ternary mixture as Alternative Fuel. Applied Mechanics and Materials, 833. pp. 41-48. ISSN 1662-7482

Saravana, Kannan Thangavelu and Piraiarasi, C. and Abu Saleh, Ahmed and Ani, F.N. (2014) Corrosion Characteristics of Copper in Malaysian Bioethanol and Gasoline blends. Applied Mechanics and Materials, 467. pp. 122-126. ISSN 1662-7482

Sarimah, Mat Hashim (2006) Project evaluation : a case study of cost reduction in changing machine design. [Final Year Project Report] (Unpublished)

Sarkawi, Buang. (2005) Crack detection of ceramic tile using acoustic emission. [Final Year Project Report] (Unpublished)

Sazali, M.Q. and Suffian, M.S.Z.M. and Khan, A. A. and Yassin, A. and Mohamaddan, Shahrol and Yusof, M. and Rashidi, S.A. and Saad, M.H.I. (2017) The Effect of Thermal Perturbation on a Polymer Material’s Tensile Test via Simulation and Experimental Analysis. Journal of Telecommunication, Electronic and Computer Engineering, 8 (12). pp. 141-145. ISSN 2289-8131

Sebastian, Anak Edwin Amin (2004) Anti-theft security application using microcontroller. [Final Year Project Report] (Unpublished)

Selvam, R. (2010) Fabrication and testing of bagasse particle reinforced biocomposite. [Final Year Project Report] (Unpublished)

Shafqat, Syed Salman. (2016) Syntheses and Characterization of Silica Nanoparticles Grafted with Selected Heterocyclic Derivatives. PhD thesis, UNIMAS.

Shafrida, Sahrani (2007) Numerical analysis of MEMS structures with accelerated motion effects. Masters thesis, -.

Shahidul, Islam (2020) Engineering Education For Achieving Sustainable Development Goals By 2030 : Revealing The Paths For Challenging Climate Change And Covid 19. Science International (Lahore), 32 (4). pp. 403-410. ISSN 1013-5316

Shahidul, Islam (2022) GREEN HYDROGEN PRODUCTION FROM PALM BIOMASS : A REVIEW ON POTENTIALS AND CHALLENGES. Science International (Lahore), 34 (4). pp. 371-380. ISSN 1013-5316

Shahidul, Islam (2019) An insight on the greenhouse gas emission from the metals process industries and its effects on climate change. Material Science & Engineering International Journal, 3 (6). pp. 205-208. ISSN 2574-9927

Shahidul, Islam and Ahmad Adzlan, Fadzli Khairi and Hishammudin Afifi, Huspi (2024) NEXUS OF GREEN TECHNOLOGY AND GREEN ENERGY IN CLEAN WATER PRODUCTION AT ZERO CARBON EMISSION: AN EXPERIMENTAL STUDY. Sci-Int.(Lahore), 36 (4). pp. 179-186. ISSN 1013-5316

Shahidul, Islam and Malcolm, M. L. and Eugene, J. J. (2018) Methane production potential of pome: a review on Waste-to-energy [WTE] Model. Journal of Sci.Int.(Lahore), 30 (5). pp. 717-728. ISSN 1013-5316

Shahidul, Islam and Michael, A. B. and Rubiyah, Baini and Shirley, Jonathan Tanjong and Ahmad Adzlan, Fadzli Khairi and Hishammudin Afifi, Huspi (2023) CLEAN WATER PRODUCTION PERFORMANCE MEASUREMENT INDICATORS AND FACTORS : A REVIEW ON ULTRAFILTER MEMBRANE. SCIENCE INTERNATIONAL (LAHORE), 35 (3). pp. 209-218. ISSN 1013-5316

Shahidul, Islam and Michael, Anggie Boniface and Rubiyah, Baini and Ahmad Adzlan Fadzli, Khairi and Hishammudin Afifi, Huspi (2024) Impact of Process Control Devices on the Performance of Ultrafilter Membrane in Clean Water Production. Journal of Advanced Research in Applied Mechanics, 120 (1). pp. 142-157. ISSN 2289-7895

Shahidul, Islam and Syed Shazali, S.T. and Abdullah, Yassin and Sarip, A.S.H. (2017) A Novel Design Work In Energy Extraction From In-Stream Water By Various Types Of Micro Hydro Turbines. Science International (Lahore), 29 (1). pp. 161-166. ISSN 1013-5316

Shahrol, Mohamaddan and Abang Mohammad Nizam, Abang Kamaruddin and N. Z., Ishak and H., Khamis and Yamamoto, Shin-ichiroh and Siti Zawiah, Md Dawal (2017) Development of Ankle Foot Orthosis (AFO) Using Pneumatic Artificial Muscle for Disabled Children. MATEC Web of Conferences, 87 (1). pp. 1-6. ISSN 2261-236X

Shahrol, Mohamaddan and Annisa, Jamali and Ana Sakura, Zainal Abidin and Mohd Syahmi, Jamaludin and MUHAMAD FADZLI, ASHARI and Helmy, Hazmi (2016) Design, Fabrication and Control of Upper Limb Rehabilitation Robot Prototype for Stroke Patients. Journal of Advanced Manufacturing Technology, 12 (1 (2)). pp. 289-299. ISSN 2289-8107

Shahrol, Mohamaddan and Annisa, Jamali and Ana Sakura, Zainal Abidin and Mohd Syahmi, Jamaludin and Noor Aliah, Abd Majid and Muhamad Fadzli, Ashari and Helmy, Hazmi (2015) Development of Upper Limb Rehabilitation Robot Device for Home Setting. Procedia Computer Science, 76. pp. 376-380. ISSN 1877-0509

Shahrol, Mohamaddan and Annisa, Jamali and Mohd Syahmi, Jamaludin (2014) Design and fabrication of finger rehabilitation device for stroke patients - a prototype development. In: 5th Brunei International Conference on Engineering and Technology (BICET 2014), 1-3 Nov. 2014, Bandar Seri Begawan, Brunei.

Shahrol, Mohamaddan and Handie, Ahmataku and Emilda, Warren and Mahshuri, Yusof and Aidil Azli, Alias and Nor Hasmaliana, Abdul Manas and Kuryati, Kipli (2018) Analysis of Gate Poly Delayering in SOI Wafer. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-12). pp. 85-87. ISSN 2180-1843

Shahrol, Mohamaddan and Herman, Khamis and Komeda, Takashi and Aidil Azli, Alias and Shirley, Jonathan Tanjong and Norhuzaimin, Julai and Nurul Izzati, Hashim (2017) Development of Hand Grip Assistive Device Control System for Old People through Electromyography (EMG) Signal Acquisitions. MATEC Web of Conference, 87. pp. 1-6. ISSN 2261-236X

Shahrol, Mohamaddan and Lew, Hao Xian and Mohd Fadzli, Ashari and Marini, Sawawi and Mohamad Syazwan Zafwan, Bin Mohamad Suffian (2019) Conceptual Design of a Sago Drying Machine and Structural Simulation Using Finite Element Analysis. Journal of Sustainability Science and Management, 14 (4). pp. 86-93. ISSN 2672-7226

Shahrol, Mohamaddan and M.A., Rahman and Magdalene, Andrew Munot and Shirley, Jonathan Tanjong and B.M., Deros and Z., Md Dawal and K., Case (2021) Investigation of oil palm harvesting tools design and technique on work-related musculoskeletal disorders of the upper body. International Journal of Industrial Ergonomics, 86. ISSN 0169-8141

Shahrol, Mohamaddan and Magdalene, Andrew-Munot and Shirley, Johnathan Tanjong and SITI ZAWIAH BINTI, MD DAWAL and Keith, Case and Akihiko, Hanafusa (2021) Investigation of the Usage of Oil Palm Harvesting Tools on Work Related Musculoskeletal Disorders of Lower Limb. IEEE Eurasia Conference on Biomedical Engineering, Healthcare and Sustainability, 1 (2021). pp. 41-44. ISSN ISBN: 978-1-7281-9304-5 41

Shahrol, Mohamaddan and Ting, Sing Hong and Annisa, Jamali and Siti Raudzah, Ghazali and Saidatul Ardeenawatie, Awang and Peeraya, Sripian and Akihiko, Hanafusa (2023) Preliminary Study on Modelling and Simulation of Virtual Reality Assistive Tool for Autism Children Using Gaming Software. AIP Conference Proceedings, 2562 (1). pp. 1-8. ISSN 1551-7616

Shahrol, Mohamaddan and Ting, Sing Hong and Syed Tarmizi, Syed Shazali and Case, Keith (2017) Development of a Virtual Reality Platform as a Training Tool Using Gaming Software. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3-10). ISSN 2289-8131

Shahrul Nizam, Bibid (2000) Possibility of biomass energy usage at palm oil processing plant. [Final Year Project Report] (Unpublished)

Shakeel Ahmed, Kamboh and Labadin, Jane and Henry Rigit, Andrew Ragai (2013) Computational modeling and simulation of electro- hydrodynamic (EHD) ion-drag micropump with planar emitter and micropillar collector electrodes. In: 7th International Conference on Applied Electrostatics ( ICAES-2012).

Shanshan, Tang and Mohd Danial, Ibrahim and Andrew Ragai Henry, Rigit and Zhang, Wei and Chaokun, Wei (2024) A Systematic Review of Dust Suppression Methods by Experiment Based on Intelligent Technology in the Coal Mines. Journal of Electrical Systems, 20 (3). pp. 882-893. ISSN 1112-5209

Sharmila, Binti Zainal Abidin. (2004) Pesticide application and equipment technology used in the local agricultural industry. [Final Year Project Report] (Unpublished)

Shaufe, N.A. and Maleque, M.A and Abu Saleh, Ahmed and Paruka, P. (2015) Effect of Temperature on the Wear Properties of Alloy Steel under Jatropha Curcas Biodiesel. Advanced Materials Research, 1115. pp. 203-206. ISSN 1662-8985

Shazrul Nizwan, Bin Suhardi (2017) Development of Airboat propulsion system. [Final Year Project Report] (Unpublished)

Shirley, Anak Jonathan Tanjong and Raafat, N. Ibrahim and Mali, Abdollahian and Magdalene, Andrew-Munot (2018) Estimating Non Conformance Using the Modified Tolerance Region Method and the Target Distance Method. International Journal of Engineering & Technology, 7 (3.18). pp. 68-74. ISSN 2227524X

Shirley, J. Tanjong and Nur Tahirah, Razali and Magdalene, Andrew Munot and Rudiyanto, Philman Jong and Ervina, Junaidi and Annisa, Jamali (2020) ANALYSES ON PROGRAMME OUTCOMES MEASUREMENTS FOR CONTINUOUS QUALITY IMPROVEMENT OF AN UNDERGRADUATE ENGINEERING PROGRAMME. Journal of Southwest Jiaotong University, 55 (6). pp. 1-14. ISSN 0258-2724

Shunsuke, Nakano and Alyssa Asong, Ananthan and Mohd Danial, Ibrahim and Dayang Salyani, Abang Mahmod and Awang Ahmad Sallehin, Awang Husaini and Ngieng, Ngui Sing and Yuta, Sunami (2023) Evaluation of Antibacterial Activities for Poly-Dl-Lactic Acid Nanosheet on the Biomimetic Sharkskin. In: Proceedings of the ASME 2023 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, 11-13 September 2023, Austin, Texas, USA.

Shunsuke, Nakano and Mohd Danial, Ibrahim and Yuta, Sunami (2023) Manufacturing of Poly-DL-Lactic Acid Nanosheets and Evaluation of Tribological Characteristics between Nanosheet Surfaces and Fingers. Journal of Applied Science & Process Engineering, 10 (2). pp. 109-118. ISSN 2289-7771

Sia, C.V and Fernando, L. and Joseph, A. and Chua, S.N. (2018) Modified Weibull analysis on banana fiber strength prediction. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3461-3471. ISSN 2231-8380 (Online)

Silahuddin, S. M. and Abang Mohamad, Aizuddin and Shahrol, Mohamaddan and Syed Tarmizi, Syed Shazali and Mohamad Syazwan Zafwan, Mohamad Suffian and Adrus, Mohamad Tazuddin and Azfar Satari, Abdullah (2019) Design and development of a modular vibration test rig for combination types of fault in rotating machinery health diagnosis. Journal of Mechanical Engineering and Sciences, 13 (3). pp. 5323-5333. ISSN 2289-4659

Sim, J.K.F (2009) Impact properties of polymers. [Final Year Project Report] (Unpublished)

Sinin, Hamdan and Abu Saleh, Ahmed and Reddy, Amarnadh N.R. and Mohd Nurfirdaus, Mohiddin (2020) Turritella terebraShell Synthesized Calcium Oxide Catalyst for Biodiesel Productionfrom Chicken Fat. Materials Science Forum, 997. pp. 93-101. ISSN 1662-9752

Sinin, Hamdan and Ahmad Faudzi, Musib and Khairul Anwar, Mohamad Said and Saiful Hairi, Othman and Marini, Sawawi (2023) Investigation of Acoustic and Vibrational Properties Using Laser Doppler Vibrometry (LDV) and Electronic Speckle Pattern Interferometry (ESPI) of the Kulintangan Instruments. Pertanika Journal of Tropical Agricultural Science, 31 (2). pp. 1105-1120. ISSN 2231-8542

Sinin, Hamdan and Ahmad Fauzi, Musib and Iran Amri, Musoddiq and Hasnizam, Abdul Wahid and Saiful Hairi, Othman (2018) Timbral Spectogram of The Bonang From Malaysian Gamelan. International Journal of Innovative Design, Creativity and Social Sciences, 2 (2). pp. 1-7. ISSN 2600-8785

Sinin, Hamdan and Khairul Anwar, Mohamad Said and Md Rezaur, Rahman and Marini, Sawawi and Aaliyawani Ezzerin, Sinin (2023) Borneo Lute ‘Sape’ : The Frequency Spectrum and Time Frequency Analysis (TFA). BioResources, 18 (4). pp. 6761-6771. ISSN 1930-2126

Sinin, Hamdan and Khairul Anwar, Mohamad Said and Md Rezaur, Rahman and Marini, Sawawi and Aaliyawani Ezzerin, Sinin (2023) Gambus Hadhramaut : The Malaysian Malay Lute Tuning Retrieval. BioResources, 18 (2). pp. 3387-3399. ISSN 1930-2126

Sinin, Hamdan and Md Rezaur, Rahman and Khairul Anwar, Mohamad Said and Ana Sakura, Zainal Abidin and Ahmad Fauzi, Musib (2022) Sompoton: Sabah Bamboo Mouth Organ. BioResources, 17 (3). pp. 5335-5348. ISSN 1930-2126

Sinin, Hamdan and Md. Rezaur, Rahman and Ana Sakura, Zainal Abidin and Ahmad Fauzi, Musib (2022) Study on Vibro-acoustic Characteristics of Bamboo-based Angklung Instrument. BioResources, 17 (1). pp. 1670-1679. ISSN 1930-2126

Sinin, Hamdan and Mohammad Nurul, Hoque and Norsuzailina, Mohamed Sutan (2015) Minor Construction Measures That Influences Vibration In Concrete Floors From Single And Dual Frequency Components. International Journal of Structural Engineering, 4 (3). pp. 147-168. ISSN 1758-7336

Sinin, Hamdan and Musoddiq, Iran Amri and Ahmad Fauzi, Musib and Marini, Sawawi (2020) Time Frequency Analysis of Peking Gamelan. Pertanika Journal of Science & Technology, 28 (2). pp. 441-457. ISSN 2231-8526

Siti Faris Afifah, Binti Abdul Ghani (2017) Servitization : challenges in manufacturing. [Final Year Project Report] (Unpublished)

Siti Fatimah, Binti Jasni (2017) Pallet design improvement and how a poor design will affect the workers. [Final Year Project Report] (Unpublished)

Siti Halida, Ahmad and Nordiana, Rajaee and Sharifah Masniah, Wan Masra and Norhuzaimin, Julai and Rohana, Sapawi and Siti Kudnie, Sahari (2005) Nonlinear filtering for impulsive noise reduction. (Unpublished)

Siti Hartini, Hamdan and Lee, Chiew Tin and Lee, Mei Bao and William Chong, Woei Fong and Chong, Cheng Tung and Suhaila, Mohd Sanip (2021) Synergistic nano-tribological interaction between zinc dialkyldithiophosphate (ZDDP) and methyl oleate for biodiesel-fueled engines. Friction, 9 (3). pp. 612-626. ISSN 2223-7690

Siti Maryam, Binti Silahuddin (2019) Development of modular vibration test rig with machine fault testing and analysis. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Siti Nur Azizah, Amran (2020) Performance of Bio-Inspired Ship Hull. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Siti Shuhadah, Shamsul Anuar (2020) Crack Growth Analysis On Lattice Structure. [Final Year Project Report] (Unpublished)

Siti Zahrah, Hj. Sahari (2002) Safety engineering study for a typical palm oil mill. [Final Year Project Report] (Unpublished)

Siti Zakiah, Maseri and Muhamad Sukri, Hadi and Annisa, Jamali and Hanim, Mohd Yatim and Mat Hussin, Ab Talib and Intan Zaurah, Mat Darus (2020) A Single Objective Flower Pollination Algorithm for Modeling the Horizontal Flexible Plate System. In: 2nd International Conference on Applied Engineering (ICAE 2019), 2-3 Oct 2019, Polibatam, Batam Indonesia.

Steven Joel, Anak Total (2017) Designing new minimum quantity of lubrication (MQL) applicator for milling. [Final Year Project Report] (Unpublished)

Sunami, Y. and Shoji, T. and Mohd Danial, Ibrahim (2023) Relationship Between Heat and Troughs During a Transport Process of Heating the Pet Films. The International Journal of Integrated Engineering, 15 (5). pp. 133-138. ISSN 2229-838X

Syahiir, Kamil and Mohamad Syazwan Zafwan, Mohamad Suffian and Ahmad Kamal Ariffin, Mohd Ihsan and Abdul Hadi, Azman (2023) Numerical Analysis of Structural Batteries Response with the Presence of Uncertainty. Jurnal Kejuruteraan, 35 (6). pp. 1329-1339. ISSN 2289-7526

Syamsul Akmal, Bin Ahmad Kamil Saraidin (2004) Design of control system for the poka yoke wagon dolly. [Final Year Project Report] (Unpublished)

Syed Salman, Shafqat and Amir Azam, Khan and Misbahulain, Khan and Kuan, Nicholas Hoo Tien and Mohd Syahmi, Jamaludin and Pang, Suh Cem (2016) Environmentally Benign Syntheses and Characterization of 4- Aryldihydropyrimidin-2(1H)-ones. MATEC Web of Conferences, 87. ISSN 2261236X

Syed Tarmizi, Syed Shazali and Tracy, Dicke and Noor Hisyam, Noor Mohamed (2023) Development of Nipah Palm Fibre Extraction Process as Reinforcing Agent in Unsaturated Polyester Composite. In: Composites from the Aquatic Environment. Composites Science and Technology . Springer Nature Singapore Pte Ltd, Singapore, pp. 181-202. ISBN 978-981-19-5326-2

Sylvester Kenneth, Sedah and Ana Sakura, Zainal Abidin and Andrew Ragai, Henry Rigit and Mohamed A., Ismail and Raudhah, Ahmadi and Md Abdul, Mannan (2016) Development of Wind Tunnel for Ultrafine Palm Oil Fuel Ash Separator. MATEC Web of Conferences, 87. ISSN 2261236X

Sylvester Usan, Ak Matu (2010) Utilization of agro-waste to produce biofertilizer. [Final Year Project Report] (Unpublished)

Sylvia Wendy, Anak Boney (2017) Simulation vibration analyss of keropok keping drying machine. [Final Year Project Report] (Unpublished)

T

TIMOTIUS PETRUS, ANAK AYI (2017) User experience (UX) design of Automobile digital instrument cluster. [Final Year Project Report] (Unpublished)

Tamrin, K. F. and Nadeem Ahmed, Sheikh and Rahmatullah, B. (2016) Numerical Analysis Of Swirl Intensity In Turbulent Swirling Pipe Flows. Jurnal Teknologi, 78 (5-6). pp. 133-141. ISSN 2180–3722

Tamrin, K. F. and Nukman, Y. and Choudhury, A. and Shirleya, S. (2015) Multiple-objective optimization in precision laser cutting of different thermoplastics. Optics and Lasers in Engineering, 67. pp. 57-65. ISSN 0143-8166

Tamrin, K. F. and Nukman, Y. and Sheikh, N.A. and Harizama, M.Z. (2014) Determination of optimum parameters using grey relational analysis for multi-performance characteristics in CO2 laser joining of dissimilar materials. Optics and Lasers in Engineering, 57. pp. 40-47. ISSN 0143-8166

Tamrin, K. F. and Nukman, Y. and Zakariyah, S.S. (2013) Laser Lap Joining of Dissimilar Materials: A Review of Factors Affecting Joint Strength. Materials and Manufacturing Processes, 28. pp. 857-871. ISSN 1042-6914

Tamrin, K. F. and Rahmatullah, B. and Samuri, S. M. (2015) Aberration compensation of holographic particle images using digital holographic microscopy. Journal of Modern Optics. ISSN 0950-0340

Tamrin, K. F. and Rahmatullah, B. and Samuri, S. M. (2015) Astigmatism compensation in digital holographic microscopy using complex-amplitude correlation. AIP Conference Proceedings, 1669 (1). ISSN 1551-7616

Tamrin, K. F. and Rahmatullah, B. and Samuri, S. M. (2015) Development of an Off-Axis Digital Holographic Microscope for Large Scale Measurement in Fluid Mechanics. 2nd International Multidisciplinary Microscopy and Microanalysis Congress. ISSN 978-3-319-16918-7 (Print)

Tamrin, K. F. and Rahmatullah, B. and Samuri, S. M. (2015) An experimental investigation of three-dimensional particle aggregation using digital holographic microscopy. Optics and Lasers in Engineering, 68. pp. 93-103. ISSN 0143-8166

Tamrin, K. F. and Rahmatullah, B. and Williams, James (2016) A review on noise suppression and aberration compensation in holographic particle image velocimetry. Cogent Physics, 3. ISSN 2331-1940

Tamrin, K. F. and Sheikh, N. A. and Rizduan, M. S. M and Nadirah, A. N. (2018) Multiple-Objective Optimization Techniques in Laser Joining of Dissimilar Materials Classes: A Comparison between Grey and Ratio Analyses. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 10 (1-12). pp. 13-18. ISSN 2180-1843

Tamrin, K. F. and Zakariyah, S.S. and Sheikh, N.A. (2015) Multi-criteria optimization in CO2 laser ablation of multimode polymer waveguides. Optics and Lasers in Engineering, 75. pp. 48-56. ISSN 0143-8166

Tamrin, K.F. and Zakariyah, S.S. and Hossain, K.M.A. and Sheikh, N.A. (2018) Experiment and prediction of ablation depth in excimer laser micro-machining of optical polymer waveguides. Advances in Materials Science and Engineering, 2018. pp. 1-9. ISSN 16878442, 16878434

Tan, Ann Nie (2018) Design And Fabrication Of Sleep Apnea Device. [Final Year Project Report] (Unpublished)

Tan, Ger Lian (2021) Improvement on Test Piece Mould Design for High Pressure Die Casting. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Tan, Ger Lian (2018) Test Piece With Double Path Runner System Using Magnesium Molten For High Precision Die-Casting Products. [Final Year Project Report] (Unpublished)

Tan, M. Y. and Kuan, H. T N and Khan, A. A. (2017) Tensile properties of ground coffee waste reinforced polyethylene composite. Materials Science Forum, 880. pp. 73-76. ISSN 02555476

Tan, Ming Yee (2017) Characterisation of Ground Coffee Waste-based Biocomposite. Masters thesis, UNIMAS.

Tan, Tang Chin (2002) Analysis a 5HP engine performances for go kart. [Final Year Project Report] (Unpublished)

Tan, Weng Joo. (2002) Turn table module in chain conveyor system. [Final Year Project Report] (Unpublished)

Tan, Yiehua and Mohammad Omar, Abdullah and Cirilo Nolasco, Nolasco-Hipólito and Nur Syuhada, Ahmad Zauzi and Wong, Georgie Abdullah (2017) Engine performance and emissions characteristics of a diesel engine fueled with diesel-biodiesel-bioethanol emulsions. Energy Conversion and Management, 132. pp. 54-64. ISSN 01968904

Tang, Kwong Yong (2017) Development of carrier robot for for physically impaired patients. [Final Year Project Report] (Unpublished)

Tang, Sing Yun (2020) Investigating the polishing resistance of granite and microtonalite with different combination ratio. [Final Year Project Report] (Unpublished)

Tang, Weng Chin. (2003) Development and implementation of fuzzy artmap neural network model in the pattern classification of product design preferences : a case study for eyeglasses frame design. [Final Year Project Report] (Unpublished)

Tang,, Chung Hieng. (2005) Solar Absorption air conditioning. [Final Year Project Report] (Unpublished)

Tanjong, S.J and Razali, N.T and Andrew Munot, Magdalene and Rudiyanto, Philman Jong and Junaidi, E. and Annisa, Jamali (2020) Analyses on programme outcomes measurements for continuous quality improvement of an undergraduate engineering programme. Journal of Southwest Jiaotong University, 55 (6). pp. 1-14. ISSN 0258-2724

Tay, Chen Chiang (2018) Physical, Mechanical and Thermal Properties of Sago Fiber Reinforced Composite Particleboard. PhD thesis, Universiti Malaysia Sarawak (UNIMAS).

Tay, Chen Chiang and Sinin, Hamdan and Mohd Shahril, Osman (2016) Effects of density of sago/urea formaldehyde particleboard towards its thermal stability, mechanical and physical properties. Jurnal Teknologi, 78 (10). pp. 187-197. ISSN 01279696

Tay, Kai Mei and Chee, Peng Lim (2009) On the use of fuzzy rule interpolation techniques for monotonic multi-input fuzzy rule base models. IEEE International Conference on Fuzzy Systems. pp. 1739-1740. ISSN 1098-7584

Tay, Tuan Ho (2004) In process surface roughness recognition (ipsrr) system using acoustic emission (ae) (I). [Final Year Project Report] (Unpublished)

Teo, Chong Yaw (2017) Performance of Minimum Quantity Lubrication System with Vegetable Oils in Turning. Masters thesis, UNIMAS.

Teoh, Yew Heng and Balakrishnan Navaneetha, Krishnan and How, Heoy Geok and Shangeetha, Ganesan and Yu, Kok Hwa and Hishammudin Afifi, Huspi (2020) Analytical Study of Performance and Emission Characteristics of a Palm Biodiesel Fuelled Engine using Response Surface Methodology. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 75 (1). pp. 127-136. ISSN 2289 - 7879

Teoh, Yew Heng and Hishammudin Afifi, Huspi and How, Heoy Geok and Farooq, Sher and Zia Ud, Din and Thanh Danh, Le and Huu Tho, Nguyen (2021) Effect of Intake Air Temperature and Premixed Ratio on Combustion and Exhaust Emissions in a Partial HCCI-DI Diesel Engine. Sustainability, 13 (15). pp. 85-93. ISSN 2071-1050

Teoh, Yew Heng and How, Heoy Geok and Balakrishnan Navaneetha, Krishnan and Hishammudin Afifi, Huspi (2022) EFFECT OF EGR ON COMBUSTION AND EMISSION CHARACTERISTICS IN DIESEL BIOETHANOL DUAL-FUEL ENGINE. ASEAN Engineering Journal, 12 (3). pp. 117-121. ISSN 2586–9159

Thangavelu, S.K. and Abu Saleh, Ahmed and Farid Nasir, Ani (2016) Impact of metals on corrosive behavior of biodiesel-diesel- ethanol(BDE) alternative fuel. Renewable Energy & Power Quality Journal, 94. pp. 1-9. ISSN 2172-038X

Thangavelu, S.K. and Ahmed, A.S. and Ani, F.N. (2016) Corrosive characteristics of bioethanol and gasoline blends for metals. International Journal of Energy Research, 2016. ISSN 0363907X

Thangavelu, S.K. and Piraiarasi, C. and Abu Saleh, Ahmed and Ani, F.N. (2015) Compatibility of Elastomers in Biodiesel-diesel-bioethanol Blend (BDE). Advanced Materials Research, 1098. pp. 51-57. ISSN 1662-8985

Thangavelu, S.K. and Piraiarasi, C. and Abu Saleh, Ahmed and Ani, F.N. (2015) Corrosion Behavior of Copper in Biodiesel-diesel-bioethanol (BDE). Advanced Materials Research, 1098. pp. 44-50. ISSN 1662-8985

Thangavelu, Saravana Kannan and Abu Saleh, Ahmed and Farid Nasir, Ani (2016) Review on bioethanol as alternative fuel for spark ignition engines. Renewable and Sustainable Energy Reviews, 56. pp. 820-835. ISSN 1364-0321

Then, Jip Chong (2004) Experimental and finite element analysis of crack detection in material. [Final Year Project Report] (Unpublished)

Then, Kuck Shee. (2004) Design and fabrication of a solar powered rice cooker or banana dryer. [Final Year Project Report] (Unpublished)

Thian, Chee Lip (2009) Evaluation of natural fiber composite materials characteristic by using finite element analysis. [Final Year Project Report] (Unpublished)

Thong, Chia Chia (2016) Mechanical and Durability Properties of Polyvinyl Alcohol (PVA) Treated Oil Palm Shell (OPS) Lightweight Concrete. Masters thesis, UNIMAS.

Thye, Hun Shen (2010) Analysis and modelling of cyclic loading power transformer. Masters thesis, Universiti Malaysia Sarawak, (UNIMAS).

Tian, Chuan Min (2016) Design, Develop And Techno-Economical Study of a Run-of-the-Weir Micro Hydro System for a Sensitive Site. Masters thesis, UNIMAS.

Tie, Soon Hieng (2008) Modification and fabrication of a hybrid solar peltier-adsorption cooler. [Final Year Project Report] (Unpublished)

Tim Brandon, Anak Sawing (2017) Development of self-powered in-pipe robot : power regeneration system. [Final Year Project Report] (Unpublished)

Timothy Julius, Edward (2002) Analysis of square slabs with opening using yield line method. [Final Year Project Report] (Unpublished)

Ting, Benson Sze Ling. (1999) Condition monitoring on vibration characteristics of rolling element bearings. [Final Year Project Report] (Unpublished)

Ting, P.H (2004) Mobile vehicle tracker using rf (hardware). [Final Year Project Report] (Unpublished)

Ting, Sing Hong (2019) Development of a Virtual Reality Assistive Tool for Individual with Autism Spectrum Disorder. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Tiong, David Wei Jye (2008) Design and fabrication of humanoid robot hand. [Final Year Project Report] (Unpublished)

Tiong, I.H (2010) Designing a pepper harvester end effector. [Final Year Project Report] (Unpublished)

Tiong, Siing Kieh (2001) Effects of damages on the fatigue properties of glass reinforced plastics. [Final Year Project Report] (Unpublished)

Tommy, Carolyne Alphonsus and Minoi, Jacey Lynn and Chin, Saw Sian (2019) Assessing Fun and Engagement in Mobile Applications for Children with Speech Delay. Applied Mechanics and Materials, 892. pp. 79-87. ISSN 1662-7482

Tracy, Dickie (2020) Physical, Mechanical, Thermal and Morphological Properties of Nipah (Nypa Fruticans) Palm Fibre Reinforced Unsaturated Polyester Composites. PhD thesis, UNIVERSITI MALAYSIA SARAWAK (UNIMAS).

U

Uh, Chee Siang (2010) Development of finger rehabilitation device for post-stroke patient. [Final Year Project Report] (Unpublished)

Universiti Malaysia Sarawak, Centre for Technology Transfer and Consultancy (CTTC) (2016) Preliminary assessment of tender for the manufacture, delivery, supervision of installation, commissioning and maintenance of pepper sterilisation machinery for Pepper Marketing Board. [Report]

Utusan Sarawak (2016) Sistem mikro hidro 'terangi' penduduk Semulong Ulu. [Newspaper Cutting] (In Press)

Utusan Sarawak (2016) UNIMAS bina hidromikro di Pa'Ramapuh. [Newspaper Cutting] (In Press)

Utusan Sarawak (1997) Pelajar UNIMAS cipta reka bentuk perodua kancil dan rusa. [Newspaper Cutting] (In Press)

V

Vigneshawaran, A/l Ramrao (2017) Video based motion analysis on badminton's lunge maneuver. [Final Year Project Report] (Unpublished)

Voon, Choon Siong (2010) Experimental evaluation of the effect of embedded insulating material and layered zone under roofing system. [Final Year Project Report] (Unpublished)

Voon, Chun Yung (2006) Evaluation of 'Perahu Tambang' engine performance and exhaust emission. [Final Year Project Report] (Unpublished)

Voon, Fook Hin (2000) Detection of small scale structural detects using vibration monitoring technique. [Final Year Project Report] (Unpublished)

W

WAN FARHANA, MOHAMAD (2021) Ni-Cr based Self Lubricating Composites with the Different Solid Lubricants Produced through Powder Metallurgy Method. PhD thesis, Universiti Malaysia Sarawak.

WAN NORMARDHIAH, WAN ‘AIZUDDIN (2020) SPACE SPECIFIC THERMAL COMFORT MODELING FOR INDIVIDUALLYOCCUPIED OFFICE. [Final Year Project Report] (Unpublished)

Walter, anak Lawrence (2009) Out of plane behaviour of profiled steel sheet dry board (PSSDB) square panel. [Final Year Project Report] (Unpublished)

Wan Adibah, Wan Mahari and Cheng, Tung Chong and Wei, Haur Lam and Tuan Nurul Sabiqah, Tuan Anuar and Nyuk, Ling Ma and Mohd Danial, Ibrahim and Su, Shiung Lam (2018) Microwave co-pyrolysis of waste polyolefins and waste cooking oil: Influence of N2 atmosphere versus vacuum environment. Energy Conversion and Management, 171. pp. 1292-1301. ISSN 0196-8904

Wan Farhana, Mohamad and Amirazam, Khan and Faiz, Ahmad and Abdullah, Yassin (2016) Physical and Mechanical Properties of Ni-Cr based composites with addition of solid lubricants produced through powder metallurgy process. MATEC Web of Conferences, 87. ISSN 2261-236X

Wan Mohd Shaham, Bin Wan Ma'sor (2004) Performance study of repeatability of robot manipulator. [Final Year Project Report] (Unpublished)

Wan Sharuzi, Bin Wan Harun (2004) The construction of poka yoke wagon dolly. [Final Year Project Report] (Unpublished)

Wei, Eric Xiang Ting and Chin, Charlie Voon Sia and Saravana, Kannan Thangavelu and Kok, Hing Chong and Annie, Joseph (2021) Mode II fracture toughness of glass–epoxy laminated composites under various heating conditions and strain rates. Materials Today, 47 (15). pp. 4941-4944.

Weili, Siong. (2006) Qualitative study of quality awareness and enhancement through interactive training tool. [Final Year Project Report] (Unpublished)

White, David J. and Randolph, Mark F. and Gaudin, Christophe and Fauzan, Sahdi (2016) The Impact of Submarine Slides on Pipelines: Outcomes from the COFS-MERIWA JIP. Offshore Technology Conference. ISSN ISBN:9781510824294

William Chong, Woei Fong and Lee, Chiew Tin and Lee, Mei Bao (2021) Simulating thermo-hydrodynamic lubrication of turbocharger journal bearing. Jurnal Tribologi, 30. pp. 13-23. ISSN 2289-7232

William L., N. Buglie and Khairul Fikri, Tamrin and Nadeem Ahmed, Sheikh and Mohd Fairus, Mohd Yasin and Shahrol, Mohamaddan (2022) Enhanced Fluid Mixing Using a Reversed Multistage Tesla Micromixer. Chemical Engineering Technology, 45 (7). pp. 1255-1263. ISSN 1521-4125

William L. N, Buglie and Khairul Fikri, Tamrin (2023) Characterization of a Sub-Atmospheric Pressure-Inducing Micropump Based on Flow Rate and Gauge Pressure Measurements. Chemical Engineering & Technology, 46. pp. 1-8. ISSN 1521-4125

Wong, Collin Tiing Ping. (2004) A study on the relationship between applied torque and resultant tension in bolt and nut assembly. [Final Year Project Report] (Unpublished)

Wong, Ging Huo (1999) Condition monitoring on vibration characteristics of composite structures. [Final Year Project Report] (Unpublished)

Wong, Kian Ann (1999) Hybrid position/force control. [Final Year Project Report] (Unpublished)

Wong, Lee Kwang (2018) The Efficient Wind Turbines Design for Low Wind Speed Air. Masters thesis, Universiti Malaysia Sarawak.

Wong, Lim Ping (2002) Relationship between torque and applied load in a bolt for different coefficient of frictions. [Final Year Project Report] (Unpublished)

Wong, S.J.U (2005) Study of humidity in box type solar cooker. [Final Year Project Report] (Unpublished)

Wong, See Meng (2000) Landscape texture manipulator (LTM) prototype designing and fabrication. [Final Year Project Report] (Unpublished)

Wong, Teck Hui (2000) Mechanical device for increasing the rate of UNION in open fractures of the Tibia. [Final Year Project Report] (Unpublished)

Wong,, Siong Ji Ung. (2005) Study of humidity in box type solar cooker. [Final Year Project Report] (Unpublished)

Wong,, Yiik Ching. (2009) Improvement of composite wood properties made from wood waste chips. [Final Year Project Report] (Unpublished)

Y

Yana Shaheera, Yunos (2020) Micro-Needle Integrated with Micro-Pump for Drug and Blood Deliveries in Polygonal Inner Structures of Micro-Channels. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Yana Shaheera, Yunos (2015) Non-newtonian blood flow behaviour in microchannels-application in medical industry. [Final Year Project Report] (Unpublished)

Yasmin, Farhana and Tamrin, K. F. and Sheikh, N. A. (2020) Extreme Learning Machine in Laser-Assisted Machining Using Waste Palm Cooking Oil. In: Natural Food Products and Waste Recovery. Apple Academic Press. ISBN 9781771889810

Yasmin Syazwani, Binti Mohamad (2017) Finite element analysis of defective die-casted AlSi9Cu3 (ADC12) steering housings. [Final Year Project Report] (Unpublished)

Yek, P.N.Y (2005) Theory of constraints (TOC) practices of a semiconductor company. [Final Year Project Report] (Unpublished)

Yek, Peter Nai Yuh (2014) Static Stability Study of a Shallow Vee Hull Airboat for Sarawak Riverine Application. Masters thesis, University Malaysia Sarawak, UNIMAS.

Yeong, C.L (2009) Penyelidikan Penggunaan konkrit buih sebagai bahan penimbusan untuk menggantikan pasir. [Final Year Project Report] (Unpublished)

Yip, Chee Yang (2018) Microwave-Assisted Pyrolysis Of Biomass For Bio-Oil And Bio Char Production. [Final Year Project Report] (Unpublished)

Yong, Eric Pik Kwong. (2016) Mechanical and Durability Properties of Concrete Containing Palm Oil Fuel Ash (POFA) and Oil Palm Shell (OPS). Masters thesis, UNIMAS.

Yong,, Weng Kheong. (2006) Design and fabrication of solar chimney. [Final Year Project Report] (Unpublished)

Yu, Holson Shen (2009) Properties of pepper waste bricks. [Final Year Project Report] (Unpublished)

Yuki, KASHIWABARA and Mohd Danial, Ibrahim and Hitoshi, WATANABE and Yuta, SUNAMI (2022) Improvement of Mechanical Properties of Materials for Magnesium alloy Die-casting by Heated Sleeve Systems. JOURNAL OF JAPAN SOCIETY FOR DESIGN ENGINEERING. pp. 1-12. ISSN 2188-9023

Yvone Ingan, Matheus Gires (2001) Hand held ticketing machine. [Final Year Project Report] (Unpublished)

Z

Zahrim, A.Y. and Ricky, L.N.S. and Hilal, N. and Tamrin, K. F. (2016) Ammonia-Nitrogen Recovery from Synthetic Solution using Agricultural Waste Fibers. Indian Journal of Science and Technology, 10 (16). ISSN 09746846

Zarith Najwa, Binti Zaidi (2017) Application of lean production system in local furniture manufacturing industry. [Final Year Project Report] (Unpublished)

Zhenyu, Gao and Mohd Najib, Abdullah Sani (2024) Computer Vision-Inspired Design of Children's Medical Products. Computer-Aided Design and Applications, 21 (S19). pp. 97-115. ISSN 1686-4360

Zul Zaffri, Mustafa (2020) Analysis Of The Factors Affecting The Semiconductor Manufacturing System Using Simulation Based Modelling. [Final Year Project Report] (Unpublished)

Zulfika, Ismail (2005) Vibration analysis on joint. [Final Year Project Report] (Unpublished)

Zulkurnain bin, Salim (2004) Designing a pineapple machine. [Final Year Project Report] (Unpublished)

Zuraime, Abdul Rahman @ Raman. (2004) Mechanical properties (compression) of oil palm fibreboard. [Final Year Project Report] (Unpublished)

This list was generated on Mon Oct 14 10:13:32 2024 +08.