Items where Division is "Academic Faculties, Institutes and Centres > Faculty of Engineering
Faculties, Institutes, Centres > Faculty of Engineering" and Year is 2017

Article

Abdul Razak, Abdul Karim and Quenneville, Pierre and Norazzlina, M.Sa'don and Mahshuri, Yusof (2017) Investigation the Meraka hardwood failure in bolted connections parallel to the timber grain. International Journal of Engineering & Technology, 7 (3). pp. 62-65. ISSN 0975-4024

Afzan Ahmad, Zaini and Intan Rohani, Endut (2017) The drivers towards green construction- An empirical study in Malaysia. Journal of Engineering and Applied Sciences, 12 (4). pp. 814-818. ISSN 1815-949X

Afzan Ahmad, Zaini and Siti Akhtar, Mahayuddin and Nurzawani, Binti Md. Sofwan (2017) Exploring the construction safety risk drivers and risk prevention. Journal of Engineering and Applied Sciences, 12 (8). pp. 1952-1957. ISSN 1816-949X

Ahmad Safuan, A. Rashid and Mohammad Gharehzadeh, Shirazi and Hisham, Bin Mohamad and Fauzan, Sahdi (2017) Bearing capacity of sandy soil treated by Kenaf fibre geotextile. Environmental Earth Sciences, 76 (12). ISSN 18666280

Ahmed Mohamed, Ahmed Haidar and Al-Khalid, Othman and Lopes, Luiz A.C. (2017) Flexibility-based anti-islanding protection of a microgrid integrated with power grid. 5th IEEE International Conference on Smart Energy Grid Engineering SEGE 2017. pp. 38-45. ISSN ISBN: 978-153861775-5

Ahmed Mohamed, Ahmed Haidar and Kashem, M. Muttaqi and Mehrdad, Tarafdar Hagh (2017) A Coordinated Control Approach for DC link and Rotor Crowbars to Improve Fault Ride-Through of DFIG-Based Wind Turbine. IEEE Transactions on Industry Applications, 53 (5). ISSN 0093-9994

Al-Khalid, Hj Othman and Hushairi, Zen and Mohd Azlan, Ismail (2017) CFD Modelling of a Pump as Turbine (PAT) with Rounded Leading Edge Impellers for Micro Hydro Systems. MATEC Web of Conferences, 87 (05004). pp. 1-5. ISSN 2261-236X

Alhaji, Mohammed Haji and Khairuddin, Sanaullah and Afrasyab, Khan and Hamza, Abdulhamid M. and Muhammad, Ali M. and Mustapha, S. I. and Rigit, Andrew Ragai Henry and Bhawani, Showkat Ahmad (2017) Erratum to: Recent developments in immobilizing titanium dioxide on supports for degradation of organic pollutants in wastewater-A review. International Journal of Environmental Science and Technology, 14 (9). p. 2053. ISSN 1735-1472

Alsidqi, B.Mahmud Hasan and Ali, Karrech and Bruno, Chareyre (2017) Evaluating force distributions within virtual uncemented mine backfill using discrete element method. International Journal of Geomechanics, 17 (7). ISSN 15323641

Ana Sakura, Zainal Abidin and Sim, Chia Chie and Muhammad Hamizan, Zaini and Muhammad Farhan Aiman, Mohd Pauzi and Mohammad Muaz, Sadini and Shahrol, Mohamaddan and Annisa, Jamali and Rasli, Muslimen and Muhd Fadzli, Ashari and Mohd Syahmi, Jamaludin (2017) Development of In-Pipe Robot D300: Cornering Mechanism. MATEC Web of Conferences, 87. ISSN 2261236X

Angelina, Harry and Marini, Sawawi and Muhammad, Kashif and Siti Kudnie, Sahari and Mohammad, Rusop (2017) Optical, Electrical and Structural Investigation on Different Molarities of Titanium Dioxide (TiO2) via Sol-Gel Method. Journal of Telecommunication, Electronic and Computer Engineering, 8 (12). pp. 87-91. ISSN 2289-8131

Ariny, Demong and Khairuddin, Sanaullah and Afrasyab, Khan (2017) A CFD study of swirl effect on hydrodynamics in a gas-liquid bubbly flow reactor. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3165-3168. ISSN 1819-6608

Askari, Masoud and Moghavvemi, M. and Almurib, Haider Abbas F. and Ahmed Mohamed, Ahmed Haidar (2017) Stability of Soft Constrained Finite Horizon Model Predictive Control. IEEE Transactions on Industry Applications (99). ISSN 0093-9994

Azarina, Azman and Shafrida, Sahrani and Kismet, Hong Ping and Dayang Azra, Awang Mat (2017) A new approach for solving inverse scattering problems with overset grid generation method. Telkomnika (Telecommunication Computing Electronics and Control)Open Access, 15 (2). pp. 820-828. ISSN 1693-6930

Azrul Zulwali, Kifli and Siti Noor Linda, Taib and Wong, Chee Chung (2017) Physical Properties of Tropical Sibu Peat. Electronic Journal of Geotechnical Engineering, 22 (13). pp. 5273-5287.

Baini, R. and Langrish, T.A.G. and Rahman, M.R. and Ahmad Zauzi, N.S. and Abdul Rahman, N. (2017) Variations in banana properties. Journal of Food Measurement and Characterization, 2017. pp. 1-11. ISSN 2193-4126

Bong, Charles Hin Joo and Isa, Ebtehajaj and Hossein, Bonakdari and Fatemeh, Khoshbin and Aminuddin, Bin Ab Ghani (2017) Development of group method of data handling based on genetic algorithm to predict incipient motion in rigid rectangular storm water channel. Scientia Iranica A, 24 (3). pp. 1000-1009. ISSN 2345-3605

Buswig, Yonis.m and Al-Khalid, Hj Othman and Norhuzaimin, Julai and Sy Yi, Sim (2017) Design and Implementation of a Voltage Tracking with Artificial Neural Network Controller for a Double-input Buck-Boost Converter. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 9 (3-10). pp. 59-63. ISSN 2289-8131

Buswig, Yonis.m.yonis and Mohamed, Salem and Awang Jusoh, Jusoh and Nik Rumzi, Nik Idris and Tole, Sutikno (2017) Phase-shifted Series Resonant Converter with Zero Voltage Switching Turn-on and Variable Frequency Contro. International Journal of Power Electronics and Drive Systems (IJPEDS), 8 (3). pp. 1184-1192. ISSN 2088-8694

Chang, Josephine Hui Lai and Md Rezaur, Rahman and Sinin, Hamdan (2017) Physical, mechanical, morphological and thermal analysis of styrene-co-glycidyl methacrylate / fumed silica / clay nanocomposites. Jurnal Teknologi, 79 (5). pp. 1-10. ISSN 2180–3722

Chang, Josephine Hui Lai and Md. Rezaur, Rahman and Sinin, Hamdan and Mahbub, Hasan and Liew, Fui Kiew and Md. Mizanu, Rahman and Md. Faruk, Hossen (2017) Thermomechanical performance and high Brunauer-Emmett-Teller surface area of poly(vinyl alcohol)/silica/clay and poly(vinyl alcohol)/(fumed silica)/clay nanocomposites. Journal of Vinyl and Additive Technology, 23. pp. 119-127. ISSN 1548-0585

Chang, Wuilee and Liew, Meng Pang and Tay, Kai Meng (2017) Application of self-organizing map to failure modes and effects analysis methodology. Neurocomputing, 2017. ISSN 0925-2312

Chang, Wuilee and Tay, Kai Meng and Lim, Cheepeng (2017) A New Evolving Tree-Based Model with Local Re-learning for Document Clustering and Visualization. Neural Processing Letters. pp. 1-31. ISSN 13704621

Chia, Chia Thong and Ching, Delsye Lee Teo and Chee, Khoon Ng (2017) Durability Characteristics of Polyvinyl Alcohol–Treated Oil Palm Shell Concrete. Journal of Materials in Civil Engineering, 29 (10). ISSN 1943-5533

Chin, Ying Teh and Tay, Kai Meng and Chee, Peng Lim (2017) Monotone Data Samples Do Not Always Produce Monotone Fuzzy If- Then Rules: Learning with Ad hoc and System Identification Methods. IEEE International Conference on Fuzzy Systems (FUZZ-IEEE), 2017. ISSN 1558-4739

D. Azra, Awang Mat and N. Syuhada, Hasim and Nurmiza, Othman and Amira, Amran and D. Norkhairunnisa, Abang Zaidel and A. S. Wani, Marzuki and Shafrida, Sahrani and Kismet, Hong Ping and Rohana, Sapawi (2017) Integrated Open Loop Resonator Filter Designed with Notch Patch Antenna for Microwave Applications. Telkomnika (Telecommunication Computing Electronics and Control), 15 (3). pp. 1485-1492. ISSN 1693-6930

Dyg Norkhairunnisa, Abang Zaidel and Sharul Kamal, Abdul Rahim and Norhudah, Seman (2017) Design of ultra wideband phase shifter with improved scattering parameter performances. International Conference on Advances in Electrical, Electronic and Systems Engineering (ICAEES). ISSN ISBN: 978-1-5090-2889-4

Ervina, Junaidi and Mariatti, Jaafar and Sinin, Hamdan (2017) Influence of Hydroxyl and Carboxyl Functionalized Multi-Walled Carbon Nanotube and Filler Loading on the Tensile Properties of Epoxy Composites. Solid State Phenomena, 264. pp. 58-61. ISSN 1662-9779

Ervina, Junaidi and Mariattia, M. and Sinin, Hamdan (2017) Mechanical, electrical and thermal properties of multi-walled carbon nanotubes/epoxy composites : effect of post-processing techniques and filler loading. Polymer Bulletin, 74 (7). pp. 2513-2533. ISSN 0170-0839

Fauzan, Sahdi and White, D. J. and Gaudin, Christophe (2017) Experiments using a novel penetrometer to assess changing strength of clay during remolding and reconsolidation. Journal of Geotechnical and Geoenvironmental Engineering, 143 (4). pp. 1-7. ISSN 1090-0241

Fei, Ha Chiew and Chee, Khoon Ng and Kok, Chin Chai and Tay, Kai Meng (2017) A Fuzzy Adaptive Resonance Theory-Based Model for Mix Proportion Estimation of High-Performance Concrete. Computer-Aided Civil and Infrastructure Engineering, 32 (9). ISSN 1467-8667

Fisher, J. and Hoole, Paul R. and Pirapaharan, K. and Hoole, Samuel H. (2017) Pre-Lightning Strikes and Aircraft Electrostatics. MATEC Web of Conferences, 87. ISSN 2261-236X

Florence, Francis-Lothai and Bong, David B L (2017) A fingerprint matching algorithm using bit-plane extraction method with phase-only correlation. International Journal of Biometrics, 9 (1). pp. 44-66. ISSN 1755-8301

Foo, K.L. and Muhammad Fayyaz, Kashif and Tan, S.J. and Hashim, U. (2017) An electrochemical DNA biosensor based gold-thiolate conjugation utilizing ruthenium complex [Ru(dppz)<inf>2</inf>(qtpy)]Cl<inf>2</inf>. Microsystem Technologies, 23 (5). pp. 1237-1245. ISSN 09467076

Foo, Swee Wen and Mah, D.Y.S. and Emily, Ayub Bartholomew (2017) Modelling rainwater harvesting for commercial buildings. Water Practice & Technology, 12 (3). ISSN 1751-231X

Francis, Sakato and Joseph, Fisher and Hoole, P.R.P and Martin, Anyi and Hoole, S.R.H. (2017) A Design of a 345-kV Electric Power Transmission Line Interlinking Ramu and Rouna Grids in Papua New Guinea. MATEC Web of Conferences, 87. ISSN 2261236X

Fui, Kiew Liew and Sinin, Hamdan and Md Rezaur, Rahman and Mohamad Rusop, Mahmood and Chang, Josephine Hui Lai (2017) The effects of nanoclay and tin(IV) oxide nanopowder on morphological, thermo-mechanical properties of hexamethylene diisocyanate treated jute/bamboo/polyethylene hybrid composites. Journal of Vinyl and Additive Technology, 23. pp. 119-127. ISSN 1548-0585

Fui, Kiew Liew and Sinin, Hamdan and Md. Rezaur, Rahman and Mohamad, Rusop (2017) Thermomechanical Properties of Jute/Bamboo Cellulose Composite and Its Hybrid Composites: The Effects of Treatment and Fiber Loading. Advances in Materials Science and Engineering. ISSN 1687-8434

Hairul Azman, Roslan and Md. Anowar, Hossain and Nur Qistina, Othman and Tawan, C.S and Ipor, Isa B. (2017) Sequence characterized amplified region markers for species-specific identification of three threatened Aquilaria species. Chiang Mai Journal of Science, 44 (4). pp. 1304-1310. ISSN 0125-2526

Harmen, Muda and Othman, A.K. and Norhuzaimin, Julai (2017) Economic Dispatch Strategy for Solar Hybrid System using Lambda Iteration Method. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3-10). ISSN 2289-8131

Hikma, Shabani and Norhuzaimin, Julai and Musse, Mohamud Ahmed and Ahmad Helmi, Che Rose (2017) Intelligent Greenhouse Monitoring and Control System Based Arduino UNO Microcontroller. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3-10). p. 65. ISSN 2289-8131

Hikma, Shabani and Norhuzaimin, Julai and Musse, Mohamud Ahmed and Sheroz, Khan and Shihab, Ahmed Hameed and Mohamed Hadi, Habaebi (2017) Resilient IEEE802.15.4MAC Protocol for Multi-Hop Mesh Wireless Sensor Network. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3-10). ISSN 2289-8131

Hikma, Shabani and Norhuzaimin, Julai and Musse, Mohamud Ahmed and Sheroz, Khan and Shihab, Ahmed Hameed and Mohamed Hadi, Habaebi (2017) Wireless Communication Techniques, the Right Path to Smart Grid Distribution Systems: A Review. Proceedings - 14th IEEE Student Conference on Research and Development: Advancing Technology for Humanity, SCOReD 2016. ISSN ISBN: 978-150902947-1

Hoo Tien, Nicholas Kuan and Meng, Chuen Lee and Amir Azam, Khan and Marini, Sawawi (2017) The Low Velocity Impact Properties of Pandanus Fiber Composites. Materials Science Forum. pp. 56-60. ISSN 02555476

Hoole, P.R.P and Sharip, M.R.M. and Fisher,, J. and K, Pirapaharan, and Al Khalid, Hj Othman, and Norhuzaimin, Julai, and Shirley, Anak Rufus, and Shafrida, Sahrani, and S.R.H., Hoole (2017) Lightning Protection of Aircraft, Power Systems and Houses Containing IT Network Electronics. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 9 (3-10). pp. 1-7. ISSN 2180-1843

Hoole, P.R.P. and Shirley, Rufus and Nurul Izzati, Hashim and Mohd Hafiez Izzwan, Saad and Azfar Satari, Abdullah and Al-Khalid, Hj Othman and K., Piralaharan and Aravind, CV and Hoole, S.R.H. (2017) Power Transformer Fire and Explosion: Causes and Control. International Journal of Control Theory and Applications, 10 (16). pp. 211-219. ISSN 0974-5572

Hushairi, Zen and Ong, Sylvia Ai Ling and Al-Khalid, Othman and Khairuddin, Ab Hamid (2017) Multiple Symbol Double Differential Transmission for Amplify-and-Forward Cooperative Diversity Networks in Time-Varying Channel. Journal of Telecommunication, Electronic and Computer Engineering, 9 (4). ISSN 2289-8131

Ibrahim, M. D. and Mohtar, M. Z. and Alias, A. A. and Wong, L. K. and Yunos, Y. S. and Mahmudur Rokibur, A. Rahman and Azham, Zulkharnain and Tan, C. S. and Ravindran, Thayan (2017) Air flow optimization for energy efficient blower of biosafety cabinet class II A2. Journal of Physics: Conference Series, 822 (1). ISSN ‎1742-6588 (print)

Ibrahim, M.D and Rahman, M.R. and Khan, A.A and Mohamad, M.R and Suffian, M.S.Z.M. and Yunos, Y.S and Wong, L.K and Mohtar, M.Z (2017) Effect of mold designs on molten metal behaviour in high-pressure die casting. Journal of Physics: Conference Series, 822 (1). ISSN ‎1742-6588 (print)

Ibrahim, M.D and Wong, L.K and Anyi, M. and Yunos, Y.S and Rahman, M.R. and Mohta, M.Z (2017) Design of a novel and efficient lantern wind turbine. Journal of Physics: Conference Series, 822 (1). ISSN ‎1742-6588 (print)

Imran, Muhammad Syukri and Azhaili, Baharun and Siti Halipah, Ibrahim and Wan Azlan, Wan Zainal Abidin (2017) Investigation of earth tube system application in low income building in Kuching, Sarawak. Journal of Engineering Science and Technology, 12 (6). pp. 1433-1445. ISSN 18234690

Isa, F. and Haslinda, Zabiri and Ramasamy, Marappagounder and Lemma Dendena, Tufa and Shariff, A. M. and Shanti Faridah, Saleh (2017) Pressure modification index based on hydrodynamics and mass transfer effects for modeling of CO2 removal from natural gas via absorption at high pressures. International Journal of Greenhouse Gas Control, 56. pp. 173-186. ISSN 17505836

Jayamani, Elammaran and Soon, Kokheng and Bin Bakri, Muhammad Khusairy and Sinin, Hamdan (2017) Comparative study of sound absorption coefficients of coir/kenaf/sugarcane bagasse fiber reinforced epoxy composites. Key Engineering Materials, 730 (1). pp. 48-53. ISSN 1013-9826

Johari, A.H. and Law, P.L and Taib, S.N.L. and Yong, L.K. (2017) Assessment of Soil Erosion by Simulating Rainfall on an Equatorial Organic Soil. Journal of Civil Engineering, Science and Technology, 8 (2). pp. 72-81. ISSN 2462-1382

Jor, Jee Wong and Mohammad Omar, Abdullah and Rubiyah, Baini and Yie, Hua Tan (2017) Performance monitoring: A study on ISO 14001 certified power plant in Malaysia. Journal of Cleaner Production, 147. pp. 165-174. ISSN 0959-6526

Kar Wei, Lee and Zamakshshari, Nor Hisam and Ee, Gwendoline Cheng Lian and Mah, Siau Hui and Mohd Nor, Siti Mariam (2017) Isolation and structural modifications of ananixanthone from Calophyllum teysmannii and their cytotoxic activities. Natural Product Research, 32 (18). pp. 2147-2151. ISSN 1478-6419

Kismet, Hong Ping and Joseph, Eustacius J. and Kuryati, Kipli and Shafrida, Sahrani and Dyg Norkhairunnisa, Abang Zaidel and Mohd Iqbal, Saripan and Mohamad Hamiruce, Marhaban and Dayang Azra, Awang Mat (2017) Integration of Image Segmentation Method in Inverse Scattering for Brain Tumour Detection. Progress In Electromagnetics Research M, 61. pp. 111-122. ISSN 1937-8726

Kuan, Nicholas Hoo Tien and Tan, Ming Yee and Lee, Meng Chuen (2017) Characterization of Alkaline Treatment and Fiber Content on the Physical, Thermal, and Mechanical Properties of Ground Coffee Waste/Oxobiodegradable HDPE Biocomposites. International Journal of Polymer Science, 2017. pp. 1-12. ISSN 1687-9430

Lakshmi Gandhan, Jaya Senan and Chen, Lim Tay and Suh, Cem Pang and Suk, Fun Chin (2017) Electrochemical Reduction and Deposition of Reduced Graphene Oxide/Manganese Oxide Composite for Supercapacitor Applications via Pulse-Chronoamperometry. Journal of Science and Technology, 9 (4). pp. 1-8. ISSN 2229-8460

Lau, P.C. and Teo, Delsye Ching Lee and Mannan, Mohammad Abdul (2017) Characteristics of lightweight aggregate produced from lime-treated sewage sludge and palm oil fuel ash. Construction and Building Materials, 152. pp. 558-567. ISSN 0950-0618

Lennevey, Kinidi and Shanti Faridah, Salleh (2017) Phytoremediation of Nitrogen as Green Chemistry for Wastewater Treatment System. International Journal of Chemical Engineering, 2017. ISSN 1687-8078

Ling, Teck Yee and Soo, Chen Lin and Phan, Tze Pei and Lee, Nyanti and Sim, Siong Fong and Jongkar, Grinang (2017) Assessment of Water Quality of Batang Rajang at Pelagus Area, Sarawak, Malaysia. Sains Malaysiana, 46 (3). pp. 401-411. ISSN 0126-6039

M. Shahidul, Islam and Syed Tarmizi, Syed Shazali and Sarip, A.S.H. (2017) ENERGY EXTRACTION EFFICIENCY OF IN-STREAM MULTISTAGE MICRO-HYDRO TURBINE. Sci. Int. (Lahore), 29 (5). pp. 1129-1134. ISSN 1013-5316

MD, Ibrahim and YS, Yunos and ARH, Rigit and NAA, Mohtadzar and N, Watanabe and Y, Sunami and MRA, Rahman and LK, Wong and MZ, Mohtar (2017) Blood-mimicking delivery in polygonal structure of inner quadrupletip microneedle with valveless micro-pump. Journal of Physics: Conference Series, 822 (1). ISSN ‎1742-6588 (print)

Mah, D.Y.S. and Hii, C.P. and Ong, C.Y. and Pui, Y. (2017) Evaluation of Flooding in Sg Gita Catchment, Kuching. Journal of Applied Science & Process Engineering, 4 (1). ISSN 2289-7771

Mah, D.Y.S. and Hii, Ching Poon and Kho, Addy (2017) Modelling Approaches for Minimally Gauged Sg Similajau, Bintulu. Journal of Applied Science & Process Engineering, 4 (2). ISSN 2289-7771

Mah, D.Y.S. and Ho, Tze Yung (2017) Alternative Use Of Roundabout As Storm Water Detention Pond. Journal of Civil Engineering, Science and Technology, 8 (1). ISSN 2141-2634

Mah, D.Y.S. and Jing, Teck Lau and Hafizah Mariah, Mohd Abuseman and Fang, Yenn Teo (2017) Green Wall as Urban Flood Mitigation. Proceedings of 37th International Association of Hydro-environmental Research (IAHR) World Congress. pp. 2083-2087. ISSN 1562-6865

Mah, D.Y.S. and Siew, Ling Loh and Gabriella Sabatini, Anak Poul and Wan Hashim, Wan Ibrahim (2017) Road Intersection As Stormwater Detention Basin. Proceedings of 37th International Association of Hydro-environmental Research (IAHR) World Congress. pp. 2088-2091. ISSN 1562-6865

Maidal, Saiful Islam and Nurshamiela, S B M Azmee and Ashaari, Zaidon and Sinin, Hamdan and Abdul, Rasyid and Kh Nurul, Islam (2017) Properties of Wood Polymer Nanocomposites Impregnated With ST-co-EDA/Nanoclay. Macromolecular Symposia, 371 (1). p. 128. ISSN 1022-1360

Masra, S.M.W. and Goh, K.L. and Muhammad, M.S. and Djojodibroto, R.D. and Sapawi, R. and Kipli, K. and Shahrom, N.S. (2017) Graphical User Interface (GUI) of Digital Index Evaluation System for Finger Clubbing Identification. Scientific Research Journal, 14 (2). ISSN 2201-2796

Md Abdul, Maleque and Saffina, W. and Ahmad, A.S and Mohammad Yeakub, Ali (2017) Fe-C-Si ternary composite coating on CP-titanium and its tribological properties. IOP Conference Series: Materials Science and Engineering, 184 (1). ISSN 17578981

Md Faruk, Hossen and Sinin, Hamdan and Md Rezaur, Rahman and Islam, Md Saiful Aiful and Fui, Kiew Liew and Josephine, Chang Fui Hui and Md Mizanur, Rahman (2017) Improved thermal properties of jute fiber-reinforced polyethylene nanocomposites. Polymer Composites, 38 (7). pp. 1266-1272. ISSN 02728397

Md Rezaur, Rahman and Sinin, Hamdan and Chang, Josephine Hui Lai and Jawaid, M. and Fahmi Asyadi, Bin Md Yusof (2017) Physico-mechanical, thermal and morphological properties of furfuryl alcohol/2-ethylhexyl methacrylate/halloysite nanoclay wood polymer nanocomposites (WPNCs). Heliyon, 3. ISSN 2405-8440

Md. Rezaur, Rahman and Chang, Josephine Hui Lai and Sinin, Hamdan (2017) Evaluation of Acrylonitrile/Butyl Methacrylate/Halloysite Nanoclay Impregnated Wood Polymer Nanocomposites. BioResources, 12 (1). pp. 1871-1889. ISSN 1930-2126

Md. Rezaur, Rahman and Md Mizanur, Rahman and Sinin, Hamdan and Md Faruk, Hossen and Chang, Josephine Hui Lai and Fui, Kiew Liew (2017) Effect of nanoclay and silica on mechanical and morphological properties of jute cellulose polyethylene biocomposites. Journal of Vinyl and Additive Technology, 23. E113-E118. ISSN 1083-5601

Md. Rezaur, Rahman and Md. Tipu, Sultan and Sinin, Hamdan and Nur Syuhada, Ahmad Zauzi and Chang, Josephine Hui Lai (2017) Clay Dispersed Styrene-co-3-Trimethoxy Silyl Propyl Methacrylate Impregnated Kumpang Wood Polymer Nanocomposites: Impact on Mechanical and Morphological Properties. Procedia Engineering, 184. pp. 529-537. ISSN 1877-7058

Md. Rezaur, Rahman and Sinin, Hamdan and Chang, Josephine Hui Lai and Mohammad, Jawaid and Fahmi Asyadi, Bin Md Yusof (2017) Physico-mechanical, thermal and morphologicalproperties of furfurylalcohol/2-ethylhexyl methacrylate/halloysite nanoclay woodpolymer nanocomposites (WPNCs). Heliyon, 3 (7). ISSN 2405-8440

Md. Rezaur, Rahman and Sinin, Hamdan and Lai, Josephine Chang Hui (2017) Differential Scanning Calorimetry (DSC) and Thermogravimetric Analysis (TGA) of Wood polymer nanocomposites. MATEC Web of Conferences, 87. ISSN 2261236X

Md. Tipu, Sultan and Md. Rezaur, Rahman and Sinin, Hamdan and Zainal Abidin, Talib and Fahmi Asyadi, Bin Md Yusof and Chang, Josephine Hui Lai (2017) Impact of Various pH Levels on 4-Methyl Catechol Treatment of Wood. BioResources, 12 (2). pp. 3601-3617. ISSN 1930-2126

Ming, Yee Tan and Hoo Tien, Nicholas Kuan and Meng, Chuen Lee (2017) Characterisation of alkaline treatment and fiber content on the physical, thermal and mechanical properties of ground coffee waste/oxo-biodegradable HDPE Biocomposites. International Journal of Polymer Science, 2017. ISSN 16879422

Mohamad Said, K. A. and Genevieve Gadung, George and Mohamed Alipah, N. A. and Nor Zakirah, Ismail and Ramizah Liyana, Jama'In and Norlisa, Mili (2017) Effect of activated carbon in Polysufone-Polyethyleneimine-Silver composite membrane towards adsorption of chromium (Cr), lead (Pb), silver (Ag) and cadmium (Cd) in synthetic wastewater. Journal of Materials and Environmental Science, 8 (10). pp. 3740-3746. ISSN 20282508

Mohamad Zulfika Hazielim, Zakaria and Rubiyah, Baini and Nur Syuhada, Ahmad Zauzi (2017) Effect of pH, Dosage and Concentration on the Adsorption of Congo Red onto Untreated and Treated Aluminium Dross. IOP Conference Series: Materials Science and Engineering, 205 (1). ISSN 17578981

Mohamad Zulfika Hazielim, b Zakaria and Nur Syuhada, Ahmad Zauzi and Rubiyah, Baini and Norsuzailina, Mohamed Sutan and Md Rezaur, Rahman (2017) Evaluation of Aluminium Dross as Adsorbent for Removal of Carcinogenic Congo Red Dye in Wastewater. IOP Conf. Series: Materials Science and Engineering, 216 (1). ISSN 1757-899X

Mohamed, Shaaban and Tan, Wen-Shan and Md Pauzi, Abdullah (2017) A hybrid renewable energy system for a longhouse. ELEKTRIKA Journal of Electrical Engineering, 16 (3). pp. 23-29. ISSN 0128-4428

Mohamed Sutan, Norsuzailina and N.I.A., Ideris and S.N. L., Taib and D.T.C., Lee and A., Hassan and S.K., Sahari and K.A., Mohamad Said and H. R., Sobuz (2017) Microstructural characterization of catalysis product of nano cement based materials. E3S Web of Conferences. ISSN https://www.e3s-conferences.org/ (In Press)

Mohammad Ashaari, Kiprawi and Abdullah, Yassin and Syed Tarmizi, Syed Shazali and Shahidul, Islam and Mohd Azrin, Mohd Said (2017) Study Of Cutting Edge Temperature And Cutting Force Of End Mill Tool In High Speed Machining. MATEC Web of Conferences, 87. ISSN 2261236X

Mohd Hidir, Mohd Salleh and Norhudah, Seman and Dyg Norkhairunnisa, Abang Zaidel and Akaa Agbaeze, Eteng (2017) Investigation of unequal planar wireless electricity device for efficient wireless power transfer. Radioengineering, 26 (1). pp. 251-257. ISSN 12102512

Mohd Nasrun, Mohd Nawi and Faizal, Baharum and Siti Halipah, Ibrahim and Riazi Mehdi, Riazi (2017) A review study of maintenance and management issues in Malaysian commercial building towards sustainable future practice. AIP Conference Proceedings, 1891 (1). ISSN 0094-243X

Muhammad Khusairy, Bin Bakri and Elammaran, Jayamani and Sinin, Hamdan (2017) Processing and Characterization of Banana Fiber/Epoxy Composites: Effect of Alkaline Treatment. Materials Today: Proceedings, 4 (2). pp. 2871-2878. ISSN 2214-7853

Muhammad Syukri, Imran and Azhaili, Baharun and Siti Halipah, Ibrahim and Wan Azlan, Wan Zaina Abidinl (2017) Performance of Low Cost Alternative Radiant Cooling Panel in Malaysia. International Journal of Sustainable Construction Engineering & Technology, 8 (2). ISSN 2180-3242

Muhammad Syukri Imran, Abdullah and Azhaili, Baharun and Siti Halipah, Ibrahim and Wan Azlan, Wan Zainal Abidin (2017) Evaluation of low cost radiant cooling panel in a test room with passively cooled water. Journal of Advances in Technology and Engineering Studies, 3 (5). pp. 211-223. ISSN 2414-4592

Muhd Fauzy, Sulaiman and Faisal, Amsyar and Ma, Chau Khun and Abdullah Zawawi, Awang and Wahid, Omar (2017) Bond Between SSTT Confined Concrete and Ribbed Steel Reinforcement Bar. Transactions on Science and Technology, 4 (3). pp. 194-201. ISSN 2289-8786

Murad, S.A.Z. and Harun, A. and Shaiful Nizam, Mohyar and Rohana, Sapawi and Ten, S.Y. (2017) Design of aquaponics water monitoring system using Arduino microcontroller. AIP Conference Proceedings, 1885 (1). pp. 1-7. ISSN 0094-243X

Murad, S.A.Z. and Sapawi, R. (2017) Low Noise Figure 2.4 GHz Down Conversion CMOS Mixer for Wireless Sensor Network Application. Proceedings - 14th IEEE Student Conference on Research and Development: Advancing Technology for Humanity, SCOReD 2016. ISSN ISBN: 978-150902947-1

Mustafa Kamal, M. and Rubiyah, Baini and Shahrol, Mohamaddan and Onni Suhaiza, Selaman and Nur Syuhada, Ahmad Zauzi and Md. Rezaur, Rahman and Abdul Rahman, N. and Chong, K.H and Atan, M. F. and Abdul Samat, N.A.S. and S.N.L., Taib and Othman, A.K. (2017) Effect of temperature to the properties of sago starch. IOP Conf. Series: Materials Science and Engineering, 206. ISSN 1757-899X

N. N., Mohd Daud and Mohamed Nasrun, Osman and Muhammad Ramlee, Kamarudin and Abdul Rahman, Kram and Muhammad Mokhzaini, Azizan (2017) A Compact Antenna Design for Fifth Generation Wireless Communication System. MATEC Web of Conferences, 140 (01009). pp. 1-4. ISSN 2261-236X

Nawi, M.N.M and Songappenm, M. and Nadarajan, Shanthi and Siti Halipah, Ibrahim and Mustapha, R. (2017) Procurement performance and supplier management measurement issues: A case of Malaysian private company. International Journal of Supply Chain Management, 6 (1). pp. 246-253. ISSN 2051-3771

Nickholas, Anting and Mohd. Fadhil, Md. Din and Kenzo, Iwao and Mohanadoss, Ponraj and Karlvin, Jungan and Lee, Yee Yong and Lim, Alvin John Meng Siang (2017) Experimental evaluation of thermal performance of cool pavement material using waste tiles in tropical climate. Energy and Buildings, 142. pp. 211-219. ISSN 0378-7788

Noor, N.N.M. and Mat, D.A.A. and Amira, A. and Zaidel, D.N.A. and Joseph, A. (2017) The Effect of Chamfering Structure towards the Design of Open Loop Resonator Bandpass Filter for Microwave Applications. Journal of Telecommunication, Electronic and Computer Engineering, 8 (12). pp. 123-127. ISSN 2289-8131

Nor Haizan, Jamali and Kismet, Anak Hong Ping and Shafrida, Sahrani and Dayang Azra, Awang Mat and Mohammad Hamiruce, Marhaban and Mohd Iqbal, Bin Saripan and Moriyama, Toshifumi and Takenaka, Takashi (2017) Image reconstruction based on combination of inverse scattering technique and total variation regularization method. Indonesian Journal of Electrical Engineering and Computer Science, 5 (3). pp. 569-576. ISSN 25024752

Nor Hasmaliana, Abdul Manas and Rosli, Md. Illias and Nor Muhammad, Mahadi (2017) Strategy in manipulating transglycosylation activity of glycosyl hydrolase for oligosaccharide production. Critical Reviews in Biotechnology, 38 (2). pp. 1-22. ISSN 0738-8551

Nordiana, Rajaee and Awang Ahmad Sallehin, Awang Husaini and Azham, Zulkharnain (2017) Comparison between Double Stranded DNA with Restriction Enzymes and Single Stranded DNA with Primers for Solving Boolean Matrix Multiplication. Journal of Telecommunication, Electronic and Computer Engineering, 8 (12). pp. 5-8. ISSN 2289-8131

Norfamila, Che Mat and Lipscomb, Glenn Glenn (2017) Membrane process optimization for carbon capture. International Journal of Greenhouse Gas Control, 62. pp. 1-12. ISSN 1750-5836

Norhudah, Seman and Dyg Norkhairunisa, Abang Zaidel and Zuhaili Amalina, Abd Wahid and Nor Azimah, Mohd Shukor and Tharek, Abd Rahman (2017) Compact wideband broadside-coupled microstrip-slot bandpass filter for communication applications. Indonesian Journal of Electrical Engineering and Computer Science, 5 (3). pp. 650-655. ISSN 25024752

Norsiah, Fauzan and Nurul Amira, Abidin (2017) The Effects Of Neurotherapy (Nft) Using Ayatul Kursi As Stimulus On Memory Performance. Journal of Islamic, Social, Economics and Development, 2 (4). pp. 22-31. ISSN 0128-1755

Nurdiani, Zamhari and Abang Annuar, Ehsan (2017) Large cross-section rib silicon-on-insulator (SOI) S-bend waveguide. Optik, 130. pp. 1414-1420. ISSN 0030-4026

Nurdiani, Zamhari and Abang Annuar, Ehsan and Mohd Syuhaimi, Abd Rahman (2017) S-bend silicon-on-insulator (SOI) large cross-section rib waveguide for directional coupler. International Journal of Electrical and Computer Engineering, 7 (6). pp. 3299-3305. ISSN 2088-8708

Nurzati Iwani, Othman and Ahmad Fadzil, Ismail and Mohammad Kamrul, Hasan and Wahidah, Hashim and Khairayu, Badron (2017) Dynamic Spectrum Allocation Scheme for Heterogeneous Network: BER Analysis. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3-10). ISSN 2289-8131

Octavio, Carvajal-Zarrabal and Patricia M., Hayward-Jones and Cirilo Nolasco, Nolasco-Hipólito and Dulce, Barradas-Dermitz and Ana Laura, Calderón-Garcidueñas and Noe, Lopez-Amador (2017) Use of Cardiac Injury Markers in the Postmortem Diagnosis of Sudden Cardiac Death. Journal of Forensic Sciences, 62 (5). pp. 1332-1335. ISSN 0022-1198

Oon, Yin Wee and Law, Puong Ling and Kopli, Bujang and Lim, Soh Fong (2017) A Parabolic-Curvilinear Reverse-Flow Air-Flotation System (PAF) for Removal of Suspended Solids in Sago Starch Production Wastewater Effluents. International Journal of Applied Engineering Research, 12 (17). pp. 6821-6831. ISSN 0973-4562

Oon, Yin Wee and Law, Puong Ling and Kopli, Bujang and Lim, Soh Fong (2017) Physiochemical Characteristic of Sago (Metroxylon Sagu) Starch Production Wastewater Effluents. International Journal of Research in Advent Technology, 5 (9). pp. 4-13. ISSN 2321-9637

Pirapaharan, K. and Herman, Kunsei and Senthilkumar, K.S. and Hoole, P.R.P and Hoole, S.R.H. (2017) A single beam smart antenna for wireless communication in a highly reflective and narrow environment. 2016 International Symposium on Fundamentals of Electrical Engineering (ISFEE),. ISSN Electronic ISBN: 978-1-4673-9575-5

Pirapaharan, K. and Hoole, P.R.P and Norhuzaimin, Julai and Al-Khalid, Othman and Ade Syaheda Wani, Marzuki and Senthilkumar, K.S. and Hoole, S.R.H. (2017) Polygonal Dipole Placements for Efficient, Rotatable, Single Beam Smart Antennas in 5G Aerospace and Ground Wireless Systems. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3-10). ISSN 2289-8131

Prashobh, Karunakaran and Lau, Alvin KS and Reddy, Anr (2017) Photovoltaic versus Micro-Hydropower for Rural Non-Grid Connected Areas of Equatorial Sarawak. Journal of Telecommunication, Electronic and Computer Engineering, 8 (12). pp. 129-133. ISSN 2289-8131

Putri, Elsa Eka and Kameswara Rao, N.S.V. and Md Abdul, Mannan (2017) Determination of pavement thickness based on threshold stress of the subgrade soil. International Journal of Civil Engineering and Technology, 8 (10). pp. 753-761. ISSN 09766308

Rahman, Md Mizanur and Rahman, Md Rezaur and Sinin, Hamdan and Md Faruk, Hossen and Chang, Josephine Hui Lai and Fui, Kiew Liew (2017) Effect of silicon dioxide/nanoclay on the properties of jute fiber/polyethylene biocomposites. Journal of Vinyl and Additive Technology, 23 (1). E107-E112. ISSN 10835601

Reddy, Anr and Saleh, A.A. and Islam, M.S. and Sinin, Hamdan (2017) Active Razor Shell CaO Catalyst Synthesis for Jatropha Methyl Ester Production via Optimized Two-Step Transesterification. Journal of Chemistry, 2017. ISSN 20909063

Reddy, Anr and Saleh, A.A. and Md Saiful, Islam and Sinin, Hamdan (2017) Optimization of transesterification parameters for optimal biodiesel yield from crude jatropha oil using a newly synthesized seashell catalyst. Journal of Engineering Science and Technology, 12 (10). pp. 2723-2732. ISSN 1823-4690

Rohana, Sapawi and Siti Kudnie, Sahari and Dayang Nur Salmi Dharmiza, Awang Salleh and Dayang Azra, Awang Mat and Sohiful Anuar, Zainol Murad (2017) Bandwidth Enhancement Technique with Low Group Delay Variation CMOS Power Amplifier for UWB System. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3-10). ISSN 2289-8131

Sahari, S.K. and Abdul Halim, N.A. and Muhammad, K. and Sawawi, M. and Hamzah, A.A. and Yeop Majlis, B. (2017) Effect of Substrate Orientation on the Growth of Germanium Oxide in Dry Oxygen Ambience. Materials Science and Engineering, 201. ISSN 0921-5093

Salisu Muhammad, Lawan and Wan Azlan, Wan Zaina Abidinl and Thelaha, Bin Hj Masri and Chai, Wangyin and Baharun, Azhaili (2017) Wind power generation via ground wind station and topographical feedforward neural network (T-FFNN) model for small-scale applications. Journal of Cleaner Production, 143 (1). pp. 1246-1259. ISSN 09596526

Sapawi, R. and Asyraf, A.N. and Mohamad Hasnul, D.H.A. and Sahari, S.K. and Masra, S.M.W. and Kipli, K. and Julai, N. and Junaidi, Nazreen and Salleh, D.N.S.A and Murad, S.A.Z. (2017) High Gain of 3.1-5.1 GHz CMOS Power Amplifier for Direct Sequence Ultra-Wideband Application. Journal of Telecommunication, Electronic and Computer Engineering, 8 (12). pp. 99-103. ISSN 2289-8131

Sapawi, R. and Salleh, D.N.S.A and Sahari, S.K. and Masra, S.M.W. and Mat, D.A.A. and Kipli, K. and Murad, S.A.Z. (2017) The Analysis of Low Phase Nonlinearity 3.1-6 GHz CMOS Power Amplifier for UWB System. Journal of Telecommunication, Electronic and Computer Engineering, 9 (2-10). ISSN 2289-8131

Sapawi, R. and Yusuf, D.S.A.A. and Mohamad Hasnul, D.H.A. and Suhaili, S. and Junaidi, N. (2017) A Review of CMOS Low Noise Amplifier for UWB System. Journal of Telecommunication, Electronic and Computer Engineering, 9 (2-9). ISSN 2289-8131

Sazali, M.Q. and Suffian, M.S.Z.M. and Khan, A. A. and Yassin, A. and Mohamaddan, Shahrol and Yusof, M. and Rashidi, S.A. and Saad, M.H.I. (2017) The Effect of Thermal Perturbation on a Polymer Material’s Tensile Test via Simulation and Experimental Analysis. Journal of Telecommunication, Electronic and Computer Engineering, 8 (12). pp. 141-145. ISSN 2289-8131

Sa’Ahmad, D.A. and Sapawi, R. and Masra, S.M.W. and Mohamad Hasnul, D.H.A. and Yusuf, D.S.A.A. and Sahari, S.K. and Sawawi, M. (2017) A Review of Highly Efficient Class F Power Amplifier Design Technique in Gigahertz Frequencies. Journal of Telecommunication, Electronic and Computer Engineering, 9 (2-9). ISSN 2289-8131

Senthilkumar, K.S. and Lorothy, Singkang and Hoole, P.R.P and Norhuzaimin, Julai and Ang, S. and Shafrida, Sahrani and Kismet, Anak Hong Ping and Pirapaharan, K. and Hoole, S.R.H. (2017) A Review of a Single Neuron Weight Optimization Model for Adaptive Beam Forming. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3-10). ISSN 2289-8131

Senthilkumar, K.S. and Pirapaharan, K. and Lakshmanan, Gurusamy and Hoole, P.R.P and Hoole, S.R.H. (2017) Accuracy of Perceptron based beamforming for embedded smart and MIMO antennas. 2016 International Symposium on Fundamentals of Electrical Engineering (ISFEE),. ISSN Electronic ISBN: 978-1-4673-9575-5

Shabani, Hikma and Ahmed Mohamed, Ahmed Haidar and Norhuzaimin, Julai and Musse, Mohamud Ahmed and Hoole, P.R.P. and Marai, Majdi (2017) Adaptive Algorithm for Optimal Route Configuration in Multi-Hop Wireless Sensor Network. International Journal of Control Theory and Applications, 10 (16). pp. 267-275. ISSN 0974-5572

Shahidul, Islam and Syed Shazali, S.T. and Abdullah, Yassin and Sarip, A.S.H. (2017) A Novel Design Work In Energy Extraction From In-Stream Water By Various Types Of Micro Hydro Turbines. Science International (Lahore), 29 (1). pp. 161-166. ISSN 1013-5316

Shahrol, Mohamaddan and Abang Mohammad Nizam, Abang Kamaruddin and N. Z., Ishak and H., Khamis and Yamamoto, Shin-ichiroh and Siti Zawiah, Md Dawal (2017) Development of Ankle Foot Orthosis (AFO) Using Pneumatic Artificial Muscle for Disabled Children. MATEC Web of Conferences, 87 (1). pp. 1-6. ISSN 2261-236X

Shahrol, Mohamaddan and Herman, Khamis and Komeda, Takashi and Aidil Azli, Alias and Shirley, Jonathan Tanjong and Norhuzaimin, Julai and Nurul Izzati, Hashim (2017) Development of Hand Grip Assistive Device Control System for Old People through Electromyography (EMG) Signal Acquisitions. MATEC Web of Conference, 87. pp. 1-6. ISSN 2261-236X

Shahrol, Mohamaddan and Ting, Sing Hong and Syed Tarmizi, Syed Shazali and Case, Keith (2017) Development of a Virtual Reality Platform as a Training Tool Using Gaming Software. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3-10). ISSN 2289-8131

Sharifah Masniah, Wan Masra and Mohd Saufee, Muhammad and Rahardjo Darmanto, Djojodibroto and Rohana, Sapawi and Kuryati, Kipli and Siti Kudnie, Sahari and Nur Syahira, Shahrom and Maryam Rufaidah, Mazlan (2017) Digital Circumferential Finger Measuring Device for Finger Clubbing Identification. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3-10). ISSN 2289-8131

Sharip, M.R.M. and Lau, K.Y. and Zaidel, D.N.A. (2017) Modeling of Nanocomposite Structures to Evaluate the Effect of Nanoplatelet Interphase Region on Electric Field Intensity. Journal of Telecommunication, Electronic and Computer Engineering, 8 (12). pp. 147-152. ISSN 2289-8131

Sherlynna Parveen, Deshon Kaman and Tan, I. A. W. and Lik, Leonard Pueh Lim (2017) Palm oil mill effluent treatment using coconut shell - Based activated carbon: Adsorption equilibrium and isotherm. MATEC Web of Conferences, 87. ISSN 2261236X

Simon Wasinya, Pallam and Hikma, Shabani and Dayang Azra, Awang Mat and Norhuzaimin, Julai (2017) Improving Spectral Efficiency in Space Communications using SRRC Pulse-Shaping Technique. Journal of Telecommunication, Electronic and Computer Engineering, 8 (12). pp. 9-16. ISSN 2289-8131

Siti Farhanah, SM Johan and Chee Ming, Chan (2017) Oedometric study of dredged marine soils admixed with sand for settlement reduction. International Journal of GEOMATE, 13 (38). pp. 59-62. ISSN 2186-2990

Siti Farhanah, SM Johan and Mohammad Zawawi, Rosman and Chee Ming, Chan and Norsilan, Wahiduddin (2017) Geotechnical properties of dredged marine sediments from Malaysian waters. Journal Online Jaringan Pengajian Seni Bina, 5 (1). pp. 20-26. ISSN 2504-8457

Siti Kudnie, Sahari and Muhammad, Kashif and Marini, Sawawi and Nik Amni Fathi, Nik Zaini Fathi and Azrul Azlan, Hamzah and Burhanuddin, Yeop Majlis and Norsuzailina, Mohamed Sutan and Rohana, Sapawi and Kuryati, Kipli and Marini, Sawawi and Nurul Atiqah, Abdul Halim and Nazreen, Junaidi and Sharifah Masniah, Wan Masra (2017) Stability of Chlorine Termination on Ge(100) and Ge(111) Surfaces. MATEC Web of Conferences, 87. ISSN 2261236X

Siti Kudnie, Sahari and Muhammad, Kashif and Norsuzailina, Mohamed Sutan and Zaidi, Embong and Nik Amni Fathi, Nik Zaini Fathi and Azrul Azlan, Hamzah and Rohana, Sapawi and Burhanuddin, Yeop Majlis and Ibrahim, Ahmad (2017) Growth kinetic and composition of the interfacial layer for RF sputtering Al2O3 layer on germanium. Microelectronics International, 32 (4). pp. 64-68. ISSN 1356-5362

Siti Noor Linda, Binti Taib and Onni Suhaiza, Binti Selaman and Chen, C. L. and Lim, R. and Dayangku Salma, Binti Awang Ismail (2017) Landslide Susceptibility in Relation to Correlation of Groundwater Development and Ground Condition. Advances in Civil Engineering, 2017 (1). pp. 1-7. ISSN 1687-8086

Siti Noor Linda, Binti Taib and Yong, Weng Long and Onni Suhaiza, Binti Selaman (2017) Evaluation of Critical Parameters to Improve Slope Drainage System. Advances in Civil Engineering, 2017 (4). pp. 1-9. ISSN 1687-8086

Siti Sufiah, Abd Wahid and Mohd Fikri Hilmi, Mohd Taib and Yanuar, Z. Arief and Mohd Hafizi, Ahmad and Noor Azlinda, Ahmad and Nor Asiah, Muhamad and Zuraimy, Adzis and Mohd Hafiez, Izzwan Saad (2017) Experimental Investigation on Vegetative Oils under Accelerated Thermal Ageing against Their Dielectric Strength. International Journal of Electrical and Computer Engineering (IJECE), 7 (3). pp. 1588-1593. ISSN 2088-8708

Syed Salman, Shafqat and Amirazam, Khan and Misbahulain, Khan and Shanti Faridah, Salleh and Mohd Syahmi, Jamaludin and Pang, Suh Cem (2017) Green synthesis and characterization of 3-carboxycoumarin and ethylcoumarin-3-carboxylate via Knoevenagel condensation. Asian Journal of Chemistry, 29 (2). pp. 261-266. ISSN 0970-7077

Tamrin, Khairul Fikri and Zahrim, A.Y. (2017) Determination of optimum polymeric coagulant in palm oil mill effluent coagulation using multiple-objective optimisation on the basis of ratio analysis (MOORA). Environmental Science and Pollution Research. pp. 1-7. ISSN 09441344

Tan, I. A. W. and Mohammad Omar, Abdullah and Lim, L.L.P. and Yeo, T.H.C. (2017) Surface Modification and Characterization of Coconut Shell-Based Activated Carbon Subjected to Acidic and Alkaline Treatments. Journal of Applied Science & Process Engineering, 4 (2). ISSN 2289-7771

Tan, I. A. W. and Shafee, N.M. and Mohammad Omar, Abdullah and Lim, L.L.P. (2017) Synthesis and characterization of biocoal from Cymbopogon citrates residue using microwave-induced torrefaction. Environmental Technology and Innovation, 8. pp. 431-440. ISSN 2352-1864

Tan, M. Y. and Kuan, H. T N and Khan, A. A. (2017) Tensile properties of ground coffee waste reinforced polyethylene composite. Materials Science Forum, 880. pp. 73-76. ISSN 02555476

Tan, Wen-Shan and Md Pauzi, Abdullah and Mohamed, Shaaban (2017) Chance-constrained Scheduling of Variable Generation and Energy Storage in a Multi-Timescale Framework. Journal of Electrical Engineering & Technology, 12. p. 1921. ISSN 2093-7423

Tan, Yiehua and Mohammad Omar, Abdullah and Cirilo Nolasco, Nolasco-Hipólito and Nur Syuhada, Ahmad Zauzi and Wong, Georgie Abdullah (2017) Engine performance and emissions characteristics of a diesel engine fueled with diesel-biodiesel-bioethanol emulsions. Energy Conversion and Management, 132. pp. 54-64. ISSN 01968904

Tee, Peifang and Mohammad Omar, Abdullah and Tan, I.A.W. and Mohamed Afizal, Mohamed Amin and Cirilo Nolasco, Nolasco-Hipólito and Kopli, Bin Bujang (2017) Effects of temperature on wastewater treatment in an affordable microbial fuel cell-adsorption hybrid system. Journal of Environmental Chemical Engineering, 5 (1). pp. 178-188. ISSN 22133437

Ting`, Wee Kiet and Alsidqi, Hasan and Fauzan, Sahdi and Siti Noor Linda, Taib and Norsuzailina, Mohamed Sutan and Badhrulhisham, Abdul Aziz and Andy, Fourie (2017) A Narrow Wall System to Capture Temperature-Stress-Strain Behavior in Paste Backfill. Geotechnical Testing Journal, 43 (2). pp. 1-38. ISSN 1945-7545

Usman Bashir, Tayab and Muhammad, Kashif (2017) A modified droop controller for parallel operation of single-phase inverters in Islanded microgrid. International Journal of Intelligent Engineering and Systems, 10 (4). pp. 11-17. ISSN 2185-310X

Yi Lung, Then and Kok Yeow, You and Ming Hao, Lee and Chia Yew, Lee (2017) Development of compact P-band vector reflectometer. International Journal of Electrical and Computer Engineering, 7 (2). pp. 791-798. ISSN 2088-8708

Yie, Hua Tan and Mohammad Omar, Abdullah and Cirilo, Nolasco-Hipolito and Nur Syuhada, Ahmad Zauzi (2017) Application of RSM and Taguchi methods for optimizing the transesterification of waste cooking oil catalyzed by solid ostrich and chicken-eggshell derived CaO. Renewable Energy & Power Quality Journal, 114. pp. 437-447. ISSN 2172-038X

Yiin, Chung Loong and Armando T., Quitain and Suzana, Yusup and Yoshimitsu, Uemura and Mitsuru, Sasaki and Tetsuya, Kida (2017) Choline chloride (ChCl) and monosodium glutamate (MSG)-based greensolvents from optimized cactus malic acid for biomass delignification. Bioresource Technology, 244 (1). pp. 941-948.

Yong, G. and Ping, K.A.H. and Sahrani, S. and Marhaban, M.H. and Sariphan, M.I. and Moriyama, T. and Takenaka, T. (2017) Profile Reconstruction Utilizing Forward-Backward Time-Stepping With the Integration of Automated Edge-Preserving Regularization Technique for Object Detection Applications. Progress In Electromagnetics Research M, 54. pp. 125-135. ISSN 1937-8726

Yung, Agnes Weng Lee and Soh, Fong Lim and Chua, David Sing Ngie and Khairuddin, Sanaullah and Rubiyah, Baini and Mohammad Omar, Abdullah (2017) Adsorption Equilibrium for Heavy Metal Divalent Ions (Cu2+, Zn2+, and Cd2+) into Zirconium-Based Ferromagnetic Sorbent. Advances in Materials Science and Engineering, 2017. ISSN 1687-8434

Zaidel, D. N.A. and Norhudah, Seman and Mohd Ridhuan, Mohd Sharip and Dayang Azra, Awang Mat and Nur Alia Athirah, Hj Mohtadzar (2017) 5G coupler design for intelligent transportation system (ITS) application. International Journal of Electrical and Computer Engineering, 7 (2). pp. 899-904. ISSN 2088-8708

Zamri, Bujang and Othman, Che Puan (2017) Simulation model of traffic operations on single carriageway roads: Model calibrationand validation. ARPN Journal of Engineering and Applied Sciences, 12 (4). pp. 945-950. ISSN 1819-6608

Book

Al-Khalid, bin Hj Othman and Siti Noor Linda, Binti Taib and Mohamad Raduan, Bin Kabit and Norsuzailina, Binti Mohamed Sutan and Alsidqi, Hasan and Raudhah, binti Ahmadi and Idawati, binti Ismail, eds. (2017) Innovative Solutions For Engineering and Technology Challenges. UNIMAS Publisher. ISBN 978-967-2008-36-1

Mah Yau Seng, Darrien (2017) Individual lot on-site stormwater detention underneath residential car porch. Universiti Malaysia Sarawak (UNIMAS), Kota Samarahan. ISBN 978-967-2008-45-3

Norsuzailina, Mohamed Sutan (2017) Innovative Solutions for Engineering and Technology Challenges. UNIMAS Publisher, Universiti Malaysia Sarawak. ISBN ISBN 978-967-2008-36-1

Norsuzailina, Sutan and Hendry Adam, Jethro and Abdul Razak, Abdul Karim and Norazzlina, M Saidon and Yau Seng, Mah (2017) Manual of Open-Ended Laboratory (OEL) : Faculty of Engineering. Universiti Malaysia Sarawak (UNIMAS), Kuching, Sarawak. ISBN 978-967-2008-14-9

Rohana, Sapawi (2017) Radio Frequency Wideband CMOS Power Amplifiers Design and Analysis. Universiti Malaysia Sarawak (UNIMAS), Kuching, Sarawak. ISBN 978-967-2008-26-2

Book Chapter

Abdul Razak, Abdul Karim and Norazzlina, M.Sa'don and Mahshuri, Yusof (2017) Modified Equations for Optimisation of Retrofitting Techniques in Masonry Buildings. In: InTEX17: Product Profile. Strengthening Research and Innovation for Communities Sustainability . Universiti Malaysia Sarawak (UNIMAS), Kota Samarahan. ISBN 978-967-5418-62-4

Md, Rezaur Rahman and Sinin, Hamdan and Jayamani, Elammaran and Muhammad Khusairy, Bin Bakri and Md. Saiful, Islam (2017) Biocomposite Materials and Its Applications in Acoustical Comfort and Noise Control. In: Biocomposite Materials and Its Applications in Acoustical Comfort and Noise Control. Green Energy and Technology . Springer International Publishing, pp. 247-259. ISBN 978-3-319-49381-7 (Print)

Nurdan Demirci, Sankir and Mehmet Sankir, Varun Vohra and Nur Tahirah, Razali and Murata, Hideyuki (2017) Interface Engineering: A Key Aspect for the Potential Commercialization of Printable Organic Photovoltaic Cells. In: Printable Solar Cells. Scrivener Publishing LLC. ISBN Print ISBN: 9781119283713

Teh, Chin Ying and Tay, Kai Meng and Lim, Cheepeng (2017) Monotone Data Samples Do Not Always Generate Monotone Fuzzy If-Then Rules. In: Emerging Trends in Neuro Engineering and Neural Computation. Series in BioEngineering, 1 . Springer, Singapore, pp. 255-264. ISBN 978-981-10-3955-3

Certificate

Erdawaty, Mohd Jaffar (2017) Certificate as a presenter at Conference on Biomedical & Advanced Materials(Bio-Cam) 2017. [Certificate] (Unpublished)

Mahshuri, Yusof and Siti Noor Linda, Taib and Faridah, Sahari and Saiful Bahari, Hj Mohd Yusoff and Sylvester Wielding, Jussem and Lucia, Chang Embo and Nur Farahanim, Zainuddin (2017) Certificate of Silver Award, Aquaponic for People in Urban Area, INTEX17, DeTAR Putra UNIMAS, 17-18th May 2017. [Certificate] (Unpublished)

Mohamed, Shaaban (2017) Certificate of Appreciation as a Session Chair in 2017 IEEE Region 10 Conference (TENCON 2017). [Certificate] (Unpublished)

Mohamed, Shaaban and Wen, Shan Tan and Md Pauzi, Abdullah (2017) Certificate of Presentation to Mohamed Shaaban, Wen Shan Tan, Md Pauzi Abdullah for the paper entitled Day-Ahead Scheduling of Wind Generation and Energy Storage in 2017 IEEE Region 10 Conference (TENCON 2017). [Certificate] (Unpublished)

Universiti Malaysia Sarawak, Centre for Graduate Studies (2017) Corporate Master in Business Administration. [Certificate] (Unpublished)

Universiti Malaysia Sarawak, Centre for Graduate Studies (2017) Master of Engineering. [Certificate] (Unpublished)

Universiti Malaysia Sarawak, Centre for Graduate Studies (2017) Master of Engineering (Civil). [Certificate] (Unpublished)

Universiti Malaysia Sarawak, Undergraduate Studies (2017) Bachelor of Engineering (Hons) in Electronic (Telecommunication). [Certificate] (Unpublished)

Universiti Malaysia Sarawak, Undergraduate Studies (2017) Bachelor of Engineering (Hons) in Electronics (Computer). [Certificate] (Unpublished)

Universiti Malaysia Sarawak, Undergraduate Studies (2017) Bachelor of Engineering with Honours (Chemical Engineering). [Certificate] (Unpublished)

Universiti Malaysia Sarawak, Undergraduate Studies (2017) Bachelor of Engineering with Honours (Civil Engineering). [Certificate] (Unpublished)

Universiti Malaysia Sarawak, Undergraduate Studies (2017) Bachelor of Engineering with Honours (Mechanical and Manufacturing Engineering). [Certificate] (Unpublished)

Universiti Malaysia Sarawak, Undergraduate Studies (2017) Bachelor of Finance (Honours). [Certificate] (Unpublished)

Final Year Project Report

Abang Mohd Arif Anaqi, Abang Isa (2017) Real time remote monitoring system for cardiac disease patient. [Final Year Project Report] (Unpublished)

Abd. Raqib, Bin Piee (2017) Microbial fuel cell (MFC) with algal biocathode: bioenergy production and wastewater treatment using sago mill effluent. [Final Year Project Report] (Unpublished)

Abdul Nazrin, Bin Abdul Rahman (2017) Production of biogas with organic waste (food waste). [Final Year Project Report] (Unpublished)

Adi Afifi, Bin Abdul Aziz (2017) Acoustical, mechanical and anatomical properties of sindora sp. (sepetir) and the effects of impregnated wood polymer. [Final Year Project Report] (Unpublished)

Ahmad Syafiq, Bin Noraldin (2017) Improvement of WristHab (game console rehabilitation system) with EMG sensor. [Final Year Project Report] (Unpublished)

Aida Fathirah, Binti Mohd Faridz. (2017) Absorption behaviour of modified concrete using aluminium dross. [Final Year Project Report] (Unpublished)

Aina Atika, Binti Azman (2017) Characterization of rice husk as usded in conversion of zeolite beta with the effect of time and temperature variations. [Final Year Project Report] (Unpublished)

Aina Najiah, Binti Abdul Razak. (2017) Course Learning Outcome Assessment System (CLOAS). [Final Year Project Report] (Unpublished)

Aishah Nur Dyana, binti Johari (2017) Secondary Consolidation Behaviour Of Samarahan Peat Soil. [Final Year Project Report] (Unpublished)

Aivea Nur Putri, Binti Hassan (2017) Performance of free space optic transmission under haze impact. [Final Year Project Report] (Unpublished)

Alexander Elvin, Anak Lee (2017) Design of economic walet bird nest harvester. [Final Year Project Report] (Unpublished)

Alif Falatin, Bin Abdul Latif (2017) Fish dorsal inspired skew turning vanes for HVAC system. [Final Year Project Report] (Unpublished)

Amalina, Binti Affendi. (2017) Integrated filter antenna (vivaldi) for microwave applications. [Final Year Project Report] (Unpublished)

Ameerul Fiqri, Bin Abu Bakar (2017) Design of microwave sensor using wideband band pass filter for measuring rice quality. [Final Year Project Report] (Unpublished)

Amirah Afiqah, Binti Mat Zaid. (2017) Study and develpoment of sensors and communication system for natural disasters. [Final Year Project Report] (Unpublished)

Amirah Mazlin, Binti Abu Bakar (2017) CATIA modelling analysis for forehand stroke and lunge of badminton player. [Final Year Project Report] (Unpublished)

Amirul Ezzat, Bin Mohamed Riduan. (2017) Improvement of low-cost attendance monitoring system using Raspberry Pi. [Final Year Project Report] (Unpublished)

Andreana Allyssa, Anak Henry (2017) Development of a laboratory model to study mechanics of slurry deposition subjected to temperature increase. [Final Year Project Report] (Unpublished)

Arlia Najeera, Binti Abdul Rahim. (2017) Application of geographic information system (GIS) in traffic signal operational system. [Final Year Project Report] (Unpublished)

Augustus Galang, Anak Minggu (2017) Improvement of palm kernel extraction rate (KER) and palm kernel analysis. [Final Year Project Report] (Unpublished)

Avylia Noami, Anak Nelson (2017) Experimental study between galvanized iron and copper as joining cable in earth system. [Final Year Project Report] (Unpublished)

Azmeera, Binti Shaibi (2017) The study of lemongrass fibre reinforced HDPE composites. [Final Year Project Report] (Unpublished)

Beatrice, Bucking. (2017) Development of new generation of field vane shear test. [Final Year Project Report] (Unpublished)

Bong, Kuek Kong (2017) Optimization of sludge flow behavior in a mixing tank through blade design. [Final Year Project Report] (Unpublished)

Brandon, Ka Jen Hau (2017) Investigation of physico-mechanical, themal, dynamic mechanical, morphological and optical properties on low density polyethylene/silica and polypropylene/clay nanocomposites. [Final Year Project Report] (Unpublished)

Brian, Wan Martin (2017) Design of a grass harvester for a small scale goat farm. [Final Year Project Report] (Unpublished)

Bryan Gran, Morse (2017) Production and characterization of thin film from sea cucumber. [Final Year Project Report] (Unpublished)

CHUONG, CHIA YAN (2017) ENGINEERING PROPERTIES OF HANDRAIL USING LIGHTWEIGHT CONCRETE. [Final Year Project Report] (Unpublished)

Catherine, Anak Alang. (2017) Numerical analysis of embankment on soft soil reinforced with stone column (PLAXIS 8.2 Software). [Final Year Project Report] (Unpublished)

Chong, Li Yee (2017) Production of bacterial pigment by fermentation of serratia marcescens for dye sensitized solar cell. [Final Year Project Report] (Unpublished)

Chua, Ten Hou (2017) Comparison on winding method for electrical generator. [Final Year Project Report] (Unpublished)

Corneelia, Anak Tedong (2017) Isotherm study of heavy metal adsorption by membrane incorporated with activated carbon. [Final Year Project Report] (Unpublished)

Cyreen, Anak Giman (2017) Investigate the performance analysis of a scale industrial fryer. [Final Year Project Report] (Unpublished)

Dayang Izzatie, Binti Awg Dahlan (2017) Chemical stabilization of pretreated amorphous peat via cement and fly ash with lime. [Final Year Project Report] (Unpublished)

Dayang Nazihah, Binti Abang Uthman. (2017) Regional rainfall frequency analysis for Samarahan river basin. [Final Year Project Report] (Unpublished)

Dayang Nur Farah Zurina, Awg Salleh (2017) Improvement of pelletized fruit bunch (EFB) of oil and rice husk by using torefaction and pre-treatment method. [Final Year Project Report] (Unpublished)

Dayang Siti Herdawati, Binti Abang Hardin (2017) Optimisation study on the improvement of crude palm oil (CPO) production process from palm oil mill. [Final Year Project Report] (Unpublished)

Easter Izzaline, Anak Meli (2017) Tidal power plant scheme at Kuching Barrage, Sarawak. [Final Year Project Report] (Unpublished)

Eugene, Anak Jackson Joy (2017) Characterization of COD removal from palm oil mill effluent (POME) with the aid of anaerobic bioreactor. [Final Year Project Report] (Unpublished)

Ezra Sungki, Anak Paul. (2017) Computer Numerical Control (CNC) for plasma cutter using MACH 3. [Final Year Project Report] (Unpublished)

Fadzirul Hafiq, Hamzah (2017) EEG measurements and signal processing : sensors, electronic amplification and filtering. [Final Year Project Report] (Unpublished)

Faiz, Bin Othman (2017) Recirculated system design for eco-burner based on intake manifold in reciprocating engine. [Final Year Project Report] (Unpublished)

Faris Nur, Bin Shuhaini (2017) Design high strength concrete by using Ultrafine POFA and fly ash as cement replacement. [Final Year Project Report] (Unpublished)

Fazira, Nan (2017) Study and development of mobile application and communication system for natural disaster. [Final Year Project Report] (Unpublished)

Fedelia, Anak Fedrick Ali (2017) Strength properties of hydrated gypsum powder. [Final Year Project Report] (Unpublished)

Foo, Swee Wen (2017) 3D modelling using solidworks : wall-mounted rainwater tank for stormwater detention in commercial areas. [Final Year Project Report] (Unpublished)

Goh, Ju Han. (2017) Image deformation in images stitching. [Final Year Project Report] (Unpublished)

Hasbah, Binti Mohamad Hashim. (2017) Automated digital blood/drug delivery system for biomedical application. [Final Year Project Report] (Unpublished)

Hii, Lu Hui (2017) Efficient compression techniques for small devices in rural area networks. [Final Year Project Report] (Unpublished)

Hillary Assan, Anak Liam (2017) Use of laser for non-contact measurement of micro-components, insects, and biological specimens. [Final Year Project Report] (Unpublished)

Humaira, Abdul Hayi (2017) Programme Outcomes Assessment System (POAS). [Final Year Project Report] (Unpublished)

Intan Nurfauzirah Shafiqah, Binti Hamzani. (2017) Effect on compressibility of stabilized peat using fiber reinforcement (sawdust) techniques. [Final Year Project Report] (Unpublished)

Ivan Isaac, Anak Thomas (2017) Characterisation of coconut leaves fibre reinforced polymer composite. [Final Year Project Report] (Unpublished)

Izzat, Bin Abdul Malik (2017) Fabrication of functional layer of solar cell by using spin and spray coating technique. [Final Year Project Report] (Unpublished)

Izzat, Zainal Abidin. (2017) A low cost and portable microwave imaging system for breast tumor detection. [Final Year Project Report] (Unpublished)

Jerron, Bin Pius (2017) A design of movement detection security cameras using Arduino. [Final Year Project Report] (Unpublished)

Joel, Anak Ngikoh @ Nyikoh (2017) Integrating an automated sorting machine with image processing device colony enumeration procedure. [Final Year Project Report] (Unpublished)

Joselyn, Jok. (2017) Cars detection in stitched image using morphological approach. [Final Year Project Report] (Unpublished)

Khairul Anwar, Bin Zainal ‘Abidin. (2017) Effect over Free Space Optics (FSO) communication in Sarawak Region. [Final Year Project Report] (Unpublished)

Khairunisa, Binti Kamarudin (2017) Fabrictaion of an active layer of organic solar cell (OSC) by using spray coating. [Final Year Project Report] (Unpublished)

Kong, Wen Yee (2017) The effect of fibre cintent on water absorption and sorptivity of sago fibre reinforced concrete. [Final Year Project Report] (Unpublished)

Lim, Wilson Wei Chien (2017) Thermal comfort control in smart home environment based on Cyber- Physical System. [Final Year Project Report] (Unpublished)

Ling, John Heng Teck. (2017) Effect of strain rate on vane shear test. [Final Year Project Report] (Unpublished)

Ling, Ming Kai (2017) Passive tank circuits effect towards wireless power tranfer. [Final Year Project Report] (Unpublished)

Loh, Ruth Siaw Hui (2017) Individual recognation based on gait features. [Final Year Project Report] (Unpublished)

Loyrita Dulling, Anak Pantau (2017) Low current tidal stream turbine for sarawak tidal stream application. [Final Year Project Report] (Unpublished)

Lucia, Anak Chang Embo (2017) Water quality in aquaponics system. [Final Year Project Report] (Unpublished)

Luqman, Bin Abdul Khalek (2017) Video based motion analysis for the overhead badminton forehand stroke. [Final Year Project Report] (Unpublished)

Lydia, Lee Shin Nuo (2017) Phycoremediation by spirulina platensis for ammoniacal nitrogen reduction. [Final Year Project Report] (Unpublished)

Majorie, Telun Avit (2017) Mechanical properties of concrete with clam shell powder as partal cement replacement. [Final Year Project Report] (Unpublished)

Mas Nor Zamirlah, Binti Zamirhan (2017) Improving ergonomics working condition in medium sized manufacturing industry. [Final Year Project Report] (Unpublished)

Melvin, Anak Philip Attan (2017) The design of 5G coupler in constructing 4X4 butler matrix beamforming system for the use in intelligent transportation system (ITS). [Final Year Project Report] (Unpublished)

Mohamad Luqman Hakim, Bin Hashim Mohd. (2017) Synchronized earthwork, erosion and sedimentation control plan for construction site. [Final Year Project Report] (Unpublished)

Mohamad Rusli, Bin Parali (2017) Automated sorting machine for counting colony forming units (CFUs). [Final Year Project Report] (Unpublished)

Mohammad Zaki Muthahhari, Bin Sholahuddin. (2017) Analysis of solar photovoltaic (PV) electrification designs for rural home applications and cost benefit analysis. [Final Year Project Report] (Unpublished)

Mohammad Zulhafiz, Bin Jenuren (2017) Development of temperature measurement of cutting tool using infrared radiation with optical fiber. [Final Year Project Report] (Unpublished)

Mohd Faiz, Bin Sahlan (2017) Raspberry PI asset location tracker. [Final Year Project Report] (Unpublished)

Mohd Helmi, Bin Mustafa. (2017) Public transport journey tracker on Raspberry PI. [Final Year Project Report] (Unpublished)

Mohd Idris, Bin Ibrahim (2017) The feasibility of the mixing liquid fuels for the boiler in terms of combustion efficency, environmental impact to the surrounding and cost saving. [Final Year Project Report] (Unpublished)

Mohd Nazreen, Bin Khalid. (2017) Public transport journey tracker on android (user interface). [Final Year Project Report] (Unpublished)

Mohd Syahnizam, Bin Garip (2017) Solar-Powered flood detection system using Arduino Uno. [Final Year Project Report] (Unpublished)

Mohd. Nuramin, Bin Masli (2017) Study of butylal as fuel additive on diesel engine performance and emission characteristics. [Final Year Project Report] (Unpublished)

Mohd. Shauqi, Bin Isa (2017) Development of an automated machine for drying lemantak. [Final Year Project Report] (Unpublished)

Muhamad Shaiezad Aiman, Bin Ayub (2017) Development of decanter cake into commercial by product in Sarawak. [Final Year Project Report] (Unpublished)

Muhammad, Jayyad (2017) Preparation and characterization of sago starch-cellulose reinforced polylactic acid hybrid biocomposite. [Final Year Project Report] (Unpublished)

Muhammad Aiman, Bin Mat Ghani (2017) Investigating the row shear failure of bolted connection in Selangan Batu wood. [Final Year Project Report] (Unpublished)

Muhammad Ammar Asyraf, Bin Zainuddin (2017) Effect of butyrate glycerine on diesel engine performance and emission characteristics. [Final Year Project Report] (Unpublished)

Muhammad Atif, Bin Norzan Shah. (2017) Development of a system to improve safety in switching of high voltage circuit breaker. [Final Year Project Report] (Unpublished)

Muhammad Faqih, Bin Mohd Jaafar (2017) High strength of bricks made up of POFA and fly ash as cement replacement. [Final Year Project Report] (Unpublished)

Muhammad Maula, Nordin (2017) The design of buildable low cost automated cat pet feeder using Arduino UNO starter kit. [Final Year Project Report] (Unpublished)

Muhammad Nabil, Bin Has-bullah (2017) Development of automated cloth hanger. [Final Year Project Report] (Unpublished)

Muhammad Nazirul, Bin Hamdan (2017) Development of sensor measuring module as the payload on unmanned aerial vehicles (UAV) in environmental monitoring. [Final Year Project Report] (Unpublished)

Muhammad Shafiq, Bin Kamarulzaman (2017) Designing of Automatic Solar Tracker for Micro Solar Application. [Final Year Project Report] (Unpublished)

Nadzrin Ahmed, Bin Fasihuddin (2017) Fabrication and mechanical properties of cellulose nanofiber reinforced polyvinyl alcohol composites. [Final Year Project Report] (Unpublished)

Najwa, Binti Ismail. (2017) Behaviour of ground improvement techniques on embankment using plaxis 2D version 8.6. [Final Year Project Report] (Unpublished)

Natasya, Percival Fernandez (2017) APPLICATION OF ELECTRICAL RESISITIVITY METHOD TO DETERMINE EFFECTIVE STRESS DURING SLURRY DEPOSITION. [Final Year Project Report] (Unpublished)

Nazrul Irfan, Bin Abdul Rahman (2017) Force analysis of automotive double wishbone suspension systems. [Final Year Project Report] (Unpublished)

Noamie, Anak Balai (2017) Automatic hand wash. [Final Year Project Report] (Unpublished)

Noor Juwita, Binti Junaiddi (2017) To study the potential of coconut fiber as soundproofing product. [Final Year Project Report] (Unpublished)

Noor Syazwani, Binti Salim (2017) Palm oil mill effluent treatment using hybrid microbial fuel cell-activated carbon system. [Final Year Project Report] (Unpublished)

Nor Intan Zaharah, Binti Ahmad Zaidi (2017) Compressibility properties of fully saturated gypsum. [Final Year Project Report] (Unpublished)

Norsyathirah, Binti Mat Shoib (2017) Evaluating the bolted connection strength of Selangan Batu wood. [Final Year Project Report] (Unpublished)

Nur Adilah, Binti Ahmad (2017) Portable smartphone-based laser glucometer for non-invasive measurement of glucose level of diabetic patients. [Final Year Project Report] (Unpublished)

Nur Aliaa, Binti Mohamad (2017) Feasibility of measuring the undrained strength of peat in the direct shear box. [Final Year Project Report] (Unpublished)

Nur Ashikin, Binti Mohd. Bujang (2017) Investigating the effect of different shapes of transmitter and receiver coil in wireless power transfer. [Final Year Project Report] (Unpublished)

Nur Azie Hazmida, Binti Abdul Hazis (2017) Ejawi converter mobile application. [Final Year Project Report] (Unpublished)

Nur Fariheen Natasha, Binti Seleman (2017) Removal of heavy metal from plating industrial wastewater by sago waste using coagulation method. [Final Year Project Report] (Unpublished)

Nur Haziyah, Binti Mohamad Razali (2017) Enhancement on gain and bandwidth of 5G rectangular patch antenna by the suppression of surface waves. [Final Year Project Report] (Unpublished)

Nur Mehranie, Binti Shamsul Bahri (2017) Mechanised slicing tools for Sarawak layered cake. [Final Year Project Report] (Unpublished)

Nur Multazimah, Binti Adenan. (2017) MyRA (Malaysian Research Assessment) database system. [Final Year Project Report] (Unpublished)

Nur Nadia, Binti Hamri (2017) Study on potential coconut fiber as shock absorbing product. [Final Year Project Report] (Unpublished)

Nur Sharzaina Hanum, Binti Sekiun (2017) Study of the effect of hydrodynamic, electrostatic and magnetic forces on the non-thermal plasma (NTP) injection in the crude oil. [Final Year Project Report] (Unpublished)

Nurizatulsima, Binti Abdul Aziz. (2017) Durability study at different age groups of planted Acacia mangium superbulk species of Sarawak. [Final Year Project Report] (Unpublished)

Nurkhadizah, Binti Salleh (2017) Evaluating on properties of different grades bitumen using Strategic Highway Research Program (SHRP) test method. [Final Year Project Report] (Unpublished)

Nurul Fazilla, Binti Ahmadi. (2017) Proposed riverbank erosion protection of Sungai Bedengan. [Final Year Project Report] (Unpublished)

Nurul Nadzatul Farhana, Binti Abdul Halim (2017) Energy efficiency in Public Works Department (PWD) Samarahan Divisional building. [Final Year Project Report] (Unpublished)

Nyemas Dewi Pramita, Binti Aie (2017) Chemical stabilization of amorphous peat via cement and fly ash with lime. [Final Year Project Report] (Unpublished)

Oudrey, Thomas Ngau (2017) Application of water pinch technology in minimization of water consumption at a palm oil mill. [Final Year Project Report] (Unpublished)

Pang, Sze Koi (2017) Thermoelectric energy harvesting for forest fire detection using Global Positioning System (GPS). [Final Year Project Report] (Unpublished)

Patrus Maximus, Anak Tinggal (2017) Solar tracker with wireless charging. [Final Year Project Report] (Unpublished)

Philiviana, Clyron Patrick (2017) Optimal cost of integrated renewable energy resources based on feed-in tariff in Malaysia. [Final Year Project Report] (Unpublished)

Phua, Brandon Jun Ming. (2017) Anti-snoring device controlled by Arduino Uno. [Final Year Project Report] (Unpublished)

Pua, Jia Yunn (2017) The use of recycled aggregate and fly ash for the production of pervious concrete. [Final Year Project Report] (Unpublished)

Rachel Rher, Anak Edwin (2017) Reducing sediments produced in horizontal slope drainage by using drain envelopes. [Final Year Project Report] (Unpublished)

Rafidah, Binti Kemat. (2017) Reduction of graphene oxide for solar cell application. [Final Year Project Report] (Unpublished)

Rafidah, Binti Ramli. (2017) Investigation of stabilized peat soil geomorphology via scanning electron microscopy. [Final Year Project Report] (Unpublished)

Rhonda Ashley, Anak Jaban (2017) Body posture monitoring system. [Final Year Project Report] (Unpublished)

Rick, Falco Polodius. (2017) Experimental study on low cost permanent magnet synchronous generator structural design using neodymium magnet. [Final Year Project Report] (Unpublished)

Ricky, Anak Tubam (2017) Removal color of dyes from textile industrial wastewater by sago waste as a coagulant. [Final Year Project Report] (Unpublished)

Shazrul Nizwan, Bin Suhardi (2017) Development of Airboat propulsion system. [Final Year Project Report] (Unpublished)

Siti Faris Afifah, Binti Abdul Ghani (2017) Servitization : challenges in manufacturing. [Final Year Project Report] (Unpublished)

Siti Fatimah, Binti Jasni (2017) Pallet design improvement and how a poor design will affect the workers. [Final Year Project Report] (Unpublished)

Siti Nur Ammarah Thaqifah, Binti Roslan. (2017) Development of thermal control radiation tool for the used with smart devices. [Final Year Project Report] (Unpublished)

Siti Nur Shafina, Binti Sabaruddin (2017) Modelling and optimization of antibacterial composite membrane by using box-behnken. [Final Year Project Report] (Unpublished)

Steven Joel, Anak Total (2017) Designing new minimum quantity of lubrication (MQL) applicator for milling. [Final Year Project Report] (Unpublished)

Sukinah, Binti Abdul Karim (2017) Apllication of magnetic material in solving environmental problem. [Final Year Project Report] (Unpublished)

Syed Muhammad Syafie, Bin Wan Saiful Bahari (2017) Development of palm oil sludge into commercial by-product in Sarawak. [Final Year Project Report] (Unpublished)

Sylvia Wendy, Anak Boney (2017) Simulation vibration analyss of keropok keping drying machine. [Final Year Project Report] (Unpublished)

Tan, Choon Hong. (2017) Compressive strength, splitting tensile strength and water absorption of sago fibre reinforced concrete. [Final Year Project Report] (Unpublished)

Tang, Kwong Yong (2017) Development of carrier robot for for physically impaired patients. [Final Year Project Report] (Unpublished)

Tim Brandon, Anak Sawing (2017) Development of self-powered in-pipe robot : power regeneration system. [Final Year Project Report] (Unpublished)

Ummie Zulaikha, Binti Kamarul Jaman (2017) Investigate the effectiveness of bio-silica absorbent from several sarawak palm oil waste ash. [Final Year Project Report] (Unpublished)

Vigneshawaran, A/l Ramrao (2017) Video based motion analysis on badminton's lunge maneuver. [Final Year Project Report] (Unpublished)

Winnie, Anak Renang (2017) The effectiveness of a fabricated bio-filtration system in treating the domestic greywater. [Final Year Project Report] (Unpublished)

Wong, Sia Siang (2017) The effect of fibre content on the split tensile strength of sago fibre reinforced concrete. [Final Year Project Report] (Unpublished)

Yasmin Syazwani, Binti Mohamad (2017) Finite element analysis of defective die-casted AlSi9Cu3 (ADC12) steering housings. [Final Year Project Report] (Unpublished)

Zarith Najwa, Binti Zaidi (2017) Application of lean production system in local furniture manufacturing industry. [Final Year Project Report] (Unpublished)

Proceeding

Ade Syaheda Wani, Marzuki and Iftekhar, Ahmad and Daryoush, Habibi and Quoc, Viet Phung (2017) Resource Management in Multi-hop Mobile Small Cell Networks. In: GLOBECOM 2017 - 2017 IEEE Global Communications Conference, 4-8 Dec. 2017, Singapore.

Aliff, Rahman and Shahrol, Mohamaddan and Noor Aliah, Abdul Majid and Magdalene, Andrew Munot and Mahsuri, Yusuf and David Chua, Sing Ngie and Baba, Md Deros (2017) Investigation of human arm musculoskeletal model using aluminium pole in palm oil harvesting process. In: 2016 IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES), 04-08 December 2016, Kuala Lumpur, Malaysia.

Bong, Charles Hin Joo and Lim, Leonard Lik Pueh and Er, Hauzh (2017) A Hydrology and Hydraulic Case Study on January 2015 Flash Flood in UniGarden, Kota Samarahan, Sarawak. In: Proceedings of the 37th IAHR World Congress, 13-18 August 2017, Kuala Lumpur, Malaysia.

Bong, Charles Hin Joo and Tze, Liang Lau and Aminuddin, Bin Ab Ghani (2017) Duration of Hydraulic Flushing and its Effect on Sediment Bed Movement. In: Proceedings of the 37th IAHR World Congress, 13-18 August 2017, Kuala Lumpur, Malaysia.

Erdawaty, Mohd Jaffar and Muhammad, Kashif and Siti Kudnie, Sahari and Zainab, Ngaini (2017) Effect of reduction temperatue of reduced graphene oxide (rGO) on morphological, optical and electrical properties. In: BioCAM 2017 : Conference on Biomedical & Advanced Material, 28 - 29th November 2017, Bayview Hotel, Langkawi, Malaysia.

Fisher, J. and Hoole, P.R.P and Pirapaharan, K. and Hoole, S.R.H. (2017) Parameters of cloud to cloud and intra-cloud lightning strikes to CFC and metallic aircraft structures. In: 2016 International Symposium on Fundamentals of Electrical Engineering (ISFEE), 30 June 2016 - 02 July 2016, Bucharest, Romania.

Jubaer, Ahmed and Zainal, Salam and Then, Yi Lung and Saad, Kashem (2017) A fast MPPT technique based on I-V curve characteristics under partial shading. In: TENCON 2017 - 2017 IEEE Region 10 Conference, 05-08 November 2017, Penang, Malaysia.

Khairul Anwar, Mohamad Said (2017) Effects of Immobilized AgNO3 in Composite Polysulfone-Polyethyleneimine Membrane towards Antibacterial Properties. In: ENCON Engineering Conference 2017, 13-15 September 2017, Imperial Hotel, Kuching. (Unpublished)

Kho, Charles Tze Kang and Jubaer, Ahmed and Saad, Kashem and Then, Yi Lung (2017) A comprehensive review on PV configurations to maximize power under partial shading. In: TENCON 2017 - 2017 IEEE Region 10 Conference, 05-08 November 2017, Penang, Malaysia.

Kipli, Kuryati and Jiris, Cripen and Sahari, Siti Kudnie and Sapawi, Rohana and Junaidi, Nazreen and Sapawi, Marini and Hong Ping, Kismet and Zulcaffle, Tengku Mohd Affendi (2017) Morphological and Otsu Thresholding Based Retinal Blood Vessel Segmentation for Detection of Retinopathy. In: UNIMAS SILVER JUBILEE CONFERENCE 2017 (USJC 2017), 18-20 October 2017, Pullman Kuching.

Mohamed, Shaaban and Wen-shan, Tan and Md Pauzi, Abdullah (2017) Day-ahead scheduling of wind generation and energy storage. In: Region 10 Conference, TENCON 2017 - 2017 IEEE, 5-8 Nov. 2017, Penang, Malaysia.

Mohd Danial, Ibrahim and Norliza, Marusman and Aidil Azli, Alias and Siti Nur Azizah, Amran and Saad Salahuddin, Musa and Mohd Rahmat, A Rahman and Yana Shaheere, Yunos and Muhammad Zaidi, Mohtar and Wong, Lee Kwang and Sunami, Yuta and Ochiai, Masayuki (2017) Characteristic of Modified Spiral Bearing and its Seals Effect through Geometries and Dimension Modification. In: Proceedings of the World Tribology Congress 2017, 17- 22 September 2017, Beijing, China.

Mohd Danial, Ibrahim and Norliza, Marusman and Sunami, Yuta and Aidil Azli, Alias and Ochiai, Masayuki and Siti Nur Azizah, Amran and Saad Salahuddin, Musa and Mohd Rahmat, A. Rahman and Yana Shaheere, Yunos and Mohd Zaidi, Mohtar and Wong, Lee Kwang (2017) Characteristics of Modified Spiral Bearing and Its Seals Effect through Geometries and Dimension Modification. In: World Tribology Congress, 17-22 September 2017, Beijing, China.

Muhammad, Kashif and Erdawaty, Jaffar and Siti Kudnie, Sahari and Amir Azam, Khan (2017) Effect of deposition temperature on Galluum Doped Zinc Oxide [Ga-ZnO)nanostructures using spray pyrolysis method. In: BioCAM 2017 : Conference on Biomedical & Advanced Material, 28 - 29th November 2017, Bayview Hotel, Langkawi, Malaysia.

Norazzlina, M.Sa'don and Abdul Razak, Abdul Karim and Siti Noor Linda, Taib and Mahshuri, Yusof (2017) Strength properties of reinforced peat using fiber- polyesterand shredded rubber-crumb as reinforcement material. In: UNIMAS Silver Jubilee Conference 2017, 18-20 October 2017, Pullman Hotel, Kuching.

Salleh, S.F. and Saree, S. and Sanaullah, K. and Sawawi, M. and Rajaee, N. (2017) Investigation on the stickiness factor for the thresher operation in Palm Oil mill industry. In: 6th Conference on Emerging Energy and Process Technology 2017, 27-28 November 2017, Johor Bharu.

Standard

Raudhah, Ahmadi and Abdul Razak, Abdul Karim and Norazzlina, M.Sa'don (2017) Malaysia National Annex to MS EN 1998-1: 2015, Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings. [Standard]

Thesis

Ahmad Salam, Farooqi (2017) Development of Novel Liquid Momentum Dissipation System in Swirl Bubbly Flow Column. Masters thesis, UNIMAS.

Bong, Voon Pai (2017) Semi-Empirical Model for Satellite Signal Reception Using Total Electron Content and Scintillation Impairments at Low Latitude Region. PhD thesis, UNIMAS.

Elaswad, Houssein M. A (2017) Modelling the Contribution of Engineering Management towards Production Output and Its Output Growth for Small Medium Enterprise (SMEs) Machinery Manufacturing. PhD thesis, UNIMAS.

Lau, Jing Teck (2017) A Study of Safe Yield Estimation at Tapah River on Water Availability for Water Treatment Plant. Masters thesis, UNIMAS.

Lee, Agnes Yung Weng. (2017) Heavy Metal Divalent Ions (Cu2+, Zn2+, Cd2+) Removal by Zirconium-based Magnetic Sorbent. Masters thesis, UNIMAS.

Lee, Man Djun (2017) Capacity Utilization of Small Scale Desalination Plant. PhD thesis, UNIMAS.

Liew, Fui Kiew (2017) Physico-Mechanical Properties of Chemically Treated Jute-Bamboo Hybrid Composites. PhD thesis, UNIMAS.

Lu, Michelle (2017) Swarm Evolutionary Programming Method for Optimal Under-Frequency Load Shedding Scheme. PhD thesis, UNIMAS.

Muhammad Syukri, Imran (2017) Design and Development of Nocturnal Water Cooling System for Building Space Cooling in Malaysian Tropical Climate. PhD thesis, Universiti Malaysia Sarawak.

Ngu, Johnny Ong King (2017) Fundamental Flow Characteristics of Individual Lot Stormwater Detention Underneath Residential Car Porch. Masters thesis, UNIMAS.

Nur Alyana Benjamin, Binti Abdullah (2017) Barriers Affecting the Treatment of Clubfoot in Sarawak. Masters thesis, UNIMAS.

Tan, Ming Yee (2017) Characterisation of Ground Coffee Waste-based Biocomposite. Masters thesis, UNIMAS.

Tan, Yie Hua (2017) Production and Testing of Emulsified Biodiesel from Waste Cooking Oil Catalysed by Egg Based CaO Heterogeneous Catalyst in a Diesel Generator. PhD thesis, UNIMAS.

Tang, Evon Ee Wen (2017) Flow Characteristics of Submerged Orifice for On-site Detention Facility with Drowned Outlet (In Drainage System). Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Tee, Pei Fang (2017) A Combined Microbial Fuel Cell and Adsorption System for Bio-energy Production and Wastewater Treatment. PhD thesis, UNIMAS.

Teo, Chong Yaw (2017) Performance of Minimum Quantity Lubrication System with Vegetable Oils in Turning. Masters thesis, UNIMAS.

Transcript

Universiti Malaysia Sarawak, Centre for Graduate Studies (2017) Transcript 2017 - Doctor of Philosophy - Faculty of Engineering. [Transcript] (Unpublished)

Universiti Malaysia Sarawak, Centre for Graduate Studies (2017) Transcript 2017 - Doctor of Philosophy - Fakulti of Engineering. [Transcript] (Unpublished)

Universiti Malaysia Sarawak, Centre for Graduate Studies (2017) Transcript 2017 - Master of Engineering (Civil) - Faculty of Engineering. [Transcript] (Unpublished)

Universiti Malaysia Sarawak, Centre for Graduate Studies (2017) Transcript 2017 - Master of Engineering - Fakulti of Engineering. [Transcript] (Unpublished)