Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General)"

Article

Wee, Freddy Liang Kho and Puong, Ling Law (2014) A predictive study : carbon monoxide emission modeling at a signalized intersection. Journal of Engineering Science and Technology, 9 (1). pp. 1-14. ISSN 1823-4690

A. K. A., Razak and Roberts, T. M. and Bridle, R. J. (2005) ALUCONCRETE COMPOSITE BEAMS AND ARCHES. ASEAN JOURNAL ON SCIENCE AND TECHNOLOGY FOR DEVELOPMENT, 22 (1&2). pp. 107-120. ISSN 0217-5460

Abang Mohamad Harith, Abang Beniamin and Noor Hisyam, Noor Mohamed and Mahsuri, Yusof (2023) The Effect of Graphene Nanoplatelets Content on the Hardness of Mg6%Zn0.2%Mn Composites. Pertanika Journal of Science & Technology, 31 (3). pp. 1493-1502. ISSN 0128-7680

Abang Mohd Arif Anaqi, Abang Isa and Kuryati, Kipli and Ahmad Tirmizi, Jobli and Muhammad Hamdi, Mahmood and Siti Kudnie, Sahari and Aditya Tri, Hernowo and Sinin, Hamdan (2021) Pseudo-colour with K-means Clustering Algorithm for Acute Ischemic Stroke Lesion Segmentation in Brain MRI. Pertanika Journal of Science & Technology,, 29 (2). pp. 1-16. ISSN 0128-7702

Abdul Azim, Abdullah and Azrul, Abdul Mutalib and Shahrizan, Baharom and Wan Hamidon, Wan Badaruzzaman (2018) Mechanical Behavior of Square CFST Columns with Embedded Steel Plate Reinforcement. International Journal of Structural and Civil Engineering Research, 7 (4). pp. 319-322. ISSN 2319-6009

Abdul Azim, Abdullah and Azrul, Abdul Mutalib and Shahrizan, Baharom and Wan Hamidon, Wan Badaruzzaman (2020) NONLINEAR INELASTIC MODEL OF STEEL COLUMN WITH SEMI-RIGID FRAME CONNECTIONS. Journal of Engineering Science and Technology, June (2020). pp. 58-65. ISSN 1823-4690

Abdul Azim, Abdullah and Azrul, Abdul Mutalib and Shahrizan, Baharom and Wan Hamidon, Wan Badaruzzaman (2020) Parametric Study on the Influence of Embedded SPR to the Performance of Square CFST Columns. International Journalof Integrated Engineering, 12 (9). pp. 191-198. ISSN 2600-7916

Abdul Karim, Abdul Razak and M.Sa’don, Norazzlina and Ingham, Jason M. (2016) Structural Dynamic Response of an Unreinforced Masonry House using Non-Destructive Forced Vibration. Journal of Earthquake Engineering, 20 (1). pp. 1-11. ISSN 1363-2469

Abdul Qayoom, Jakhrani and Andrew Ragai, Henry Rigit and Othman, A.K. and Saleem, Raza Samo and Shakeel Ahmed, Kamboh (2012) Estimation of Carbon Footprints from Diesel Generator Emissions. International Conference on Green and Ubiquitous Technology (GUT) 2012. ISSN (ISBN) 978-1-4577-2171-7

Abdul Rahman, K. and Julai, N. and Rashidi, C.B.M. and Zamhari, N. and Sahari, S. (2019) Impact of rain weather over free space optic communication transmission. Indonesian Journal of Electrical Engineering and Computer Science, 14 (1). pp. 303-310. ISSN 2502-4752

Abdul Rahman, Kram and Julai, N. and Rashidi, C.B.M. and Nurdiani, Zamhari and Sahar, i S., S. (2019) Impact of rain weather over free space optic communication transmission. Indonesian Journal of Electrical Engineering and Computer Science, 14 (1). pp. 303-310. ISSN 2502-4752

Abdul Rahman, Kram and Khairul Fikri, Tamrin and Siti Kudnie, Sahari (2024) HYBRID MODULATION TECHNIQUE TO IMPROVE RECEIVER SENSITIVITY FOR FSO LINK PROPAGATION. Journal of Theoretical and Applied Information Technology, 102 (2). pp. 440-449. ISSN 1817-3195

Abdul Rahman, Kram and Kwang Thai, C.A. and Tamrin, K. F. and Sahari, S.K. (2021) Subtraction dual-wavelength for enhanced transmission performance of free-space optical communication over turbulence effect. Electronics Letters (2021). pp. 1-3. ISSN 0013-5194

Abdul Razak, Abdul Karim and Pierre, Quenneville and Norazzlina, M.Sa'don (2022) Design Optimization of the Bolted Connection Loaded Parallel to the Timber Grain for Masonry Building Retrofits. International Journal of Mechanics, 16 (2022). pp. 6-14. ISSN 1998-4448

Abdul Razak, Abdul Karim and Quenneville, Pierre and Norazzlina, M.Sa'don and Mahshuri, Yusof (2017) Investigation the Meraka hardwood failure in bolted connections parallel to the timber grain. International Journal of Engineering & Technology, 7 (3). pp. 62-65. ISSN 0975-4024

Abdul Samat, N.A.S. and W, Renang and Baini, R. and Lai, Josephine Chang Hui and Rahman, M.R. (2021) Performance analysis of fabricated bio-filtration system for small-scaled greywater treatment: TSS and turbidity removals. IOP Conf. Series: Materials Science and Engineering, 1101 (2021). pp. 1-8.

Abdullah, A.H. and Lee, Yee Yong and Aminudin, E. and Lee, Y.H. (2019) Indoor Air Quality Assessment For A Multistorey University Office Building In Malaysia. Journal of Green Building, 14 (4). pp. 93-109. ISSN 1943-4618 (online)

Abu Saleh, Ahmed and M.A., Alam and A., Piee and M.R., Rahman and S., Hamdan (2010) Study of physical and mechanical properties of oil palm empty fruit bunch fiber reinforced polypropylene composites. Journal of Energy & Environment, 2 (1). pp. 16-21. ISSN 0958305X

Abu Zahrim, Yaser and Junidah, Lamaming and Emma, Suali and Mariani, Rajin and Sariah, Saalah and Zykamilia, Kamin and Nurliyana Nasuha, Safie and Nur Aqeela Syuhadah, Ajie and Newati, Wid (2022) Composting and Anaerobic Digestion of Food Waste and Sewage Sludge for Campus Sustainability: A Review. International Journal of Chemical Engineering, 2022. pp. 1-14. ISSN 1687-806X

Achmad, Syafuddin and Salmiati, Salmiati and Hadibarata, Tony and Ahmad Kueh, Beng Hong and Mohd Razman, Bin Salim and Muhammad Abbas, Bin Ahmad Zaini (2018) Silver Nanoparticles in the Water Environment in Malaysia : Inspection, characterization, removal, modeling, and future perspective. Scientific Reports, 8 (986). pp. 1-15. ISSN 2045-2322

Adebayo, Johnson Olufemi and Madzlan, Napiah and Kamaruddin, Ibrahim and Mohamad Raduan, Bin Kabit (2018) Evaluation of Waste Cooking Oil as Sustainable Binder for Building Blocks. E3S Web of Conferences, 65. ISSN 2267-1242

Adrian Chun Minh, Loy and Teng, Sin Yong and How, Bing Shen and Zhang, Xixia and Cheah, Kin Wai and Valeria, Butera and Leong, Wei Dong and Bridgid Lai Fui, Chin and Yiin, Chung Loong and Martin J., Taylor and Kyriakou, Georgios (2023) Elucidation of single atom catalysts for energy and sustainable chemical production: Synthesis, characterization and frontier science. Progress in Energy and Combustion Science, 96 (101074). pp. 1-55. ISSN 1873-216X

Affam, Azuka and Yonis, M. Buswig and Al-Khalid, Othman and Norhuzaimin, Julai and Qays, Ohirul (2020) A review of multiple input DC-DC converter topologies linked with hybrid electric vehicles and renewable energy systems. Renewable and Sustainable Energy Reviews, 135. pp. 1-23.

Afzan, Ahmad Zaini and Abdul Wafi, Razali and Gui, Hun Chuen and Nadia, Zaini and Sitti Diana, Tamjehi (2020) Assessing Strategies of Building Information Modeling (BIM)Implementation in Sarawak Construction Industry. IOP Conference Series: Earth and Environmental Science, 498. pp. 1-8.

Afzan, Ahmad Zaini and Intan Rohani, Endut (2018) Major challenges in implementing green construction. Journal of Engineering and Applied Sciences, 13 (11). pp. 8865-8869. ISSN 1818-7803

Afzan Ahmad, Zaini and Intan Rohani, Endut (2015) Assessing awareness, understanding, Construction practices and Innovation towards Green Construction. The 6th International Conference On Construction Engineering And Project Management (ICCEPM 2015). ISSN ISBN: 978-89-954572-6-9

Afzan Ahmad, Zaini and Intan Rohani, Endut (2015) Critical Review on the Theoretical Framework and Critical Success Factors in Green Construction. InCIEC 2014. ISSN ISBN : 978-981-287-290-6 (Online)

Afzan Ahmad, Zaini and Intan Rohani, Endut (2017) The drivers towards green construction- An empirical study in Malaysia. Journal of Engineering and Applied Sciences, 12 (4). pp. 814-818. ISSN 1815-949X

Afzan Ahmad, Zaini and Siti Akhtar, Mahayuddin and Nurzawani, Binti Md. Sofwan (2017) Exploring the construction safety risk drivers and risk prevention. Journal of Engineering and Applied Sciences, 12 (8). pp. 1952-1957. ISSN 1816-949X

Ahmad, Abd Jalil and Azlan Raofuddin, Nuruddin and Mastura, Jaafar and Md Azree, Othuman Mydin (2017) BARRIERS AND DRIVERS TO SPEED UP PREFABRICATED HOUSING IN MALAYSIAN HOUSING PROJECTS. Journal of Construction in Developing Countries (JCDC), 10 (1). pp. 1-14. ISSN 1823-6499

Ahmad, Abd Jalil and Azlan Raofuddin, Nuruddin and Mastura, Jaafar and Md Azree, Othuman Mydin (2016) CHALLENGES FOR DEVELOPERS IMPLEMENTING IBS IN MALAYSIAN HOUSING PROJECTS. Journal of Construction in Developing Countries, 2 (3). pp. 1-10. ISSN 1823-6499

Ahmad, Abd Jalil and Mastura, Jaafar and Azlan Raofuddin, Nuruddin and Md Azree, Othuman Mydin (2017) The Application of Procurement Systems in IBS Housing Project. International Journal of Supply Chain Management (IJSCM), 6 (4). pp. 299-307. ISSN 2050-7399

Ahmad, Abd Jalil and Mastura, Jaafar and Azlan Raofuddin, Nuruddin and Md Azree, Othuman Mydin (2017) HOW INDUSTRY PLAYERS PERCEIVED PAYMENT ISSUES IN INDUSTRIALISED BUILDING SYSTEM (IBS) HOUSING PROJECTS? Malaysian Construction Research Journal, 2 (2). pp. 22-35. ISSN 2590-4140

Ahmad, Abd Jalil and Mastura, Jaafar and Azlan Raofuddin, Nuruddin and Md Azree, Othuman Mydin (2015) A NEW PROCUREMENT METHOD FOR HOUSING PROJECTS IMPLEMENTING IBS MODULAR SYSTEM. International Conference on Advances in Civil and Environmental Engineering 2015, 6 (4). pp. 1-8. ISSN 2050-7399

Ahmad Afip, I. and Siti Noor Linda, Taib and Jusoff, K. and Afip, L.A. (2019) Measurement of Peat Soil Shear Strength Using Wenner Four-Point Probes and Vane Shear Strength Methods. International Journal of Geophysics, 2019. pp. 1-12. ISSN 1687-885X

Ahmad B. H., Kueh (2021) Spent ground coffee – awaking the sustainability prospects. Environmental and Toxicology Management, 1 (1). pp. 1-2. ISSN 2777-0338

Ahmad B. H., Kueh and Chun Yean, Tan and Mohd Yazid, Yahya and Mat Uzir, Wahit (2022) Impact resistance efficiency of bio-inspired sandwich beam with different arched core materials. Steel and Composite Structures, 44 (1). pp. 105-117. ISSN 1229-9367 1598-6233

Ahmad Beng Hong, Kueh (2022) Editorial scope – structure and material edition. Journal of Civil Engineering, Science and Technology, 13 (1). pp. 1-5. ISSN 2462-1382

Ahmad Faudzi, Musib and Sinin, Hamdan and Saiful Hairi, Othman (2023) A Study on Features of Different Tone Quality in a Kenong Set. Pertanika, 31 (1). pp. 17-31. ISSN 2231-8534

Ahmad Kueh, Beng Hong (2023) Thermally-induced responses of triaxially woven fabric composites. Heliyon, 9 (7). pp. 1-14. ISSN 205-8440

Ahmad Kueh, Beng Hong and Saddam H., Abo Sabah and Diyar N., Qader and Siti Hasyyati, Drahman and Mugahed, Amran (2023) Single and repetitive low-velocity impact responses of sandwich composite structures with different skin and core considerations : A review. Case Studies in Construction Materials, 18. pp. 1-32. ISSN 2214-5095

Ahmed, Sara and Mahaini, Zin and Abed, Farid and Mannan, Mohammad Abdul and Al-Samarai, Mufid (2022) Microstructure and Mechanical Property Evaluation of Dune Sand Reactive Powder Concrete Subjected to Hot Air Curing. Materials, 15 (1). pp. 1-18. ISSN 1996-1944

Ahmed I., Osman and Yubing, Zhang and Lai, Zhi Ying and Ahmed K., Rashwan and Mohamed, Farghali and Ashour A., Ahmed and Liu, Yunfei and Fang, Bingbing and Chen, Zhonghao and Ahmed, Al-Fatesh and David W., Rooney and Yiin, Chung Loong and Yap, Pow Seng (2023) Machine learning and computational chemistry to improve biochar fertilizers : a review. Environmental Chemistry Letters. pp. 1-86. ISSN 1610-3653

Ahmed Mohamed, Ahmed Haidar and Adila, Fakhar and Andreas, Helwig (2020) Sustainable energy planning for cost minimization of autonomous hybrid microgrid using combined multi-objective optimization algorithm. Sustainable Cities and Society, 62. pp. 1-20.

Ahmed Mohamed, Ahmed Haidar and Adila, Fakhar and Kashem M., Muttaqi (2020) An Effective Power Dispatch Strategy for Clustered Microgrids While Implementing Optimal Energy Management and Power Sharing Control Using Power Line Communication. IEEE Transactions on Industry Applications, 56 (4). pp. 4258-4271.

Ahmed Mohamed, Ahmed Haidar and Al-Khalid, Othman and Lopes, Luiz A.C. (2017) Flexibility-based anti-islanding protection of a microgrid integrated with power grid. 5th IEEE International Conference on Smart Energy Grid Engineering SEGE 2017. pp. 38-45. ISSN ISBN: 978-153861775-5

Aida Nur Syafiqah, Shaari and Muhamad Sukri, Hadi and Annisa, Jamali and Intan Zaurah, Mat Darus (2024) Mayfly Algorithm for Modelling a Horizontal Flexible Plate Structure. Journal of Advanced Research in Applied Mechanics, 118 (1). pp. 167-182. ISSN 2289-7895

Akeem, Gbenga Amuda and Alsidqi, Hasan and Fauzan, Sahdi and Siti Noor Linda, Taib (2019) A laboratory miniature full-flow penetrometer system for peat. International Journal of Physical Modelling in Geotechnics. pp. 1-16. ISSN 2042-6550

Akeem, Gbenga Amuda and Alsidqi, Hassan and Dayang Norfaranina, Datu Unoi and Siti Noor Linda, Binti Taib (2019) Strength And Compressibility Characteristics Of Amorphous Tropical Peat. Journal of GeoEngineering, 14 (2). pp. 85-96. ISSN 1990-8326

Akeem, Gbenga Amuda and Fauzan, Sahdi and Alsidqi, Hasan and Siti Noor Linda, Taib (2018) Variable penetration rate testing for shear strength of peat – a review. International Journal of Geotechnical Engineering. ISSN 1938-6362

Akeem, Gbenga Amuda and Fauzan, Sahdi and Alsidqi, Hasan and Siti Noor Linda, Taib and Noel, Boylan and Aliaa, Mohamad (2019) Measurement of Amorphous Peat Shear Strength in the Direct Shear Box at High Displacement Rates. Geotechnical and Geological Engineering, 37 (2). pp. 1059-1072. ISSN 1573-1529

Al-Shayea, Naser and Alsidqi, Hasan (2024) Parametric Study for the Behavior of Blocks Anchor Embedded in Sand at Various Conditions. Arabian Journal for Science and Engineering. ISSN 2191-4281

Alsidqi, B.Mahmud Hasan and Ali, Karrech and Bruno, Chareyre (2017) Evaluating force distributions within virtual uncemented mine backfill using discrete element method. International Journal of Geomechanics, 17 (7). ISSN 15323641

Alsidqi, Hasan and Lolom Evalita, Hutabarat (2024) Engineering Characteristics at Early Age of Cemented Silica Fume Paste for Peat Compaction Grouting. The Open Civil Engineering Journal, 18. pp. 1-10. ISSN 1874-1495

Alsidqi, Hasan and Nisa, Ismail and Yieng, Yung Chuo and Lin, Jye Lee (2023) Cyclic simple shear behavior of a tropical alluvial soil. Physics and Chemistry of the Earth, 129. pp. 1-5. ISSN 1474-7065

Alsidqi, Hasan and Ting, Wee Kiet (2022) Temperature Effect on Mohr–Coulomb’s Effective Strength Parameters of Paste Backfill. Frontiers in Materials, 8 (794089). pp. 1-13. ISSN 2296-8016

Amelia, Oktavia and Irza, Sukmana and Yanuar Zulardiansyah, Arief and Gigih Forda, Nama (2022) The Effect of Filler Adding Palm Kernel Shell Ash on Durability and the Marshall Values Properties of Asphalt Concrete Mix. Journal of Engineering and Scientific Research (JESR), 4 (1). pp. 23-29. ISSN 2685-0338

Amin, Heidarpour and Abdul Azim, Abdullah and Mark A., Bradford (2010) Non-linear thermoelastic analysis of steel arch members subjected to fire. Fire Safety Journal, 45 (3). pp. 183-192. ISSN 0379-7112

Amran, Mugahed and Lee, Yeong Huei and Fediuk, Roman and Murali, Gunasekaran and Mosaberpanah, Mohammad Ali and Ozbakkaloglu, Togay and Lee, Yee Yong and Vatin, Nikolai and Klyuev, Sergey and Karelia, Maria (2021) Palm Oil Fuel Ash-Based Eco-Friendly Concrete Composite: A Critical Review of the Long-Term Properties. Materials, 14 (22). pp. 1-29. ISSN 1996-1944

Amuda, Akeem Gbenga and Fauzan, Sahdi and Alsidqi, Hasan and Siti Noor Linda, Taib and Boylan, Noel and Aliaa, Mohamad (2018) Measurement of Amorphous Peat Shear Strengthin the Direct Shear Box at High Displacement Rates. Geotechnical and Geological Engineering, 37. pp. 1059-1072.

Ana Sakura, Zainal Abidin and Hasmida, Hamza and Mohd Zulhatta, Kifli and Rasli, Muslimen and Mohd Danial, Ibrahim and Raudhah, Ahmadi and Mohd Shahrizal, Abdul Razak and May, Raksmey and Annisa, Jamali (2022) DEVELOPMENT OF FRUGAL WAVE SIMULATOR FOR COASTAL EROSION STUDY. PERINTIS eJournal, 12 (2). pp. 69-80. ISSN 2232-0725

Ana Sakura, Zainal Abidin and Melissa Michelle, Rolland and Sinin, Hamdan and Rasli, Muslimen and Shirley, Jonathan Tanjong and Raudhah, Ahmadi and Shahrol, Mohamaddan and Annisa, Jamali (2023) Pre-Treatments Effect on Pepper Drying Time and Microstructure. AIP Conference Proceedings, 2643 (1). pp. 1-9. ISSN 1551-7616

Ana Sakura, Zainal Abidin and Mohamad Zulhatta, Kifli and Annisa, Jamali and Rasli, Muslimen and Raudhah, Ahmadi (2020) Development of Black Pepper Rotary Drum Dryer System. International Journal o f Integrated Engineering, 12 (7). pp. 11-19. ISSN 2600-7916

Aneela, Sabir and Atif, Islam and Muhammad, Shafiq and Amir, Shafeeq and Muhammad Taqi, Zahid Butt and Nasir M., Ahmad and Khairuddin, Sanaullah and Tahir, Jamil (2016) Novel polymer matrix composite membrane doped with fumed silica particles for reverse osmosis desalination. Desalination, 368. pp. 159-170. ISSN 0011-9164

Annisa, Jamali and Lidyana, Roslan and Mohamad Syazwan Zafwan, Mohamad Suffian (2022) Grey Wolf Optimization For Intelligent Parametric Modeling Of Gradient Flexible Plate Structure. Journal of Applied Science and Engineering, 26 (9). pp. 1207-1214. ISSN 2708-9975

Annisa, Jamali and Sheldon Ijau, Winston (2022) Axis manipulation to solve Inverse Kinematics of Hyper-Redundant Robot in 3D Space. Journal of Integrated and Advanced Engineering, 2 (2). pp. 112-122. ISSN 2774-602X

April Chee, Ling Kwang and Bridgid Chin, Lai Fui and Shaharin Anwar, Sulaiman and Chai, Yee Ho and Agus, Saptoro and Hadiza Aminu, Umar and Serene Lock, Sow Mun and Yiin, Chung Loong (2024) Syngas-Enriched hydrogen production via catalytic gasification of water hyacinth using renewable palm kernel shell hydrochar. Fuel, 362. pp. 1-10. ISSN 0016-2361

April Ling Kwang, Chee and Bridgid Lai Fui, Chin and Sharon Meng Xuang, Goh and Chai, Yee Ho and Adrian Chun Minh, Loy and Cheah, Kin Wai and Yiin, Chung Loong and Serene Sow Mun, Lock (2023) Thermo-catalytic co-pyrolysis of palm kernel shell and plastic waste mixtures using bifunctional HZSM-5/limestone catalyst : Kinetic and thermodynamic insights. Journal of the Energy Institute, 107 (101194). pp. 1-12. ISSN 1743-9671

Armstrong Ighodalo, Omoregi and Khalida, Muda and Dominic Ek, Leong On and Oluwapelumi, Olumide Ojuri and Muhammad Khusairy, Bakri and Md. Rezaur, Rahman and Hazlami Fikri, Basri and Yong, Ee Ling (2023) Soil bio-cementation treatment strategies : state-of-the-art review. Geotechnical Research. pp. 1-25. ISSN 2052-6156

Ashraf, Qazi Mamoon and Habaebi, Mohamed Hadi and Sinniah, Gopinath Rao and Ahmed, Musse Mohamud and Khan, Sheroz and Hameed, Shihab (2014) Autonomic Protocol and Architecture for Devices in Internet of Things. 2014 IEEE Innovative Smart Grid Technologies - Asia (ISGT ASIA). pp. 737-742. ISSN 2378-8542

Askari, Masoud and Moghavvemi, M. and Almurib, Haider Abbas F. and Ahmed Mohamed, Ahmed Haidar (2017) Stability of Soft Constrained Finite Horizon Model Predictive Control. IEEE Transactions on Industry Applications (99). ISSN 0093-9994

Atiqah, Zakaria and Norazzlina, M.Sa'don and Abdul Razak, Abdul Karim and Zoran, Djumic (2022) STRENGTH PERFORMANCE ON STABILISATION OF SARAWAK SOILS USING GEOCRETE® TECHNOLOGY. Journal of Sustainability Science and Management, 17 (6). pp. 172-181. ISSN 2672-7226

Augustine, Agi and Radzuan, Junin and Gbadamosi, Afeez and Muhammad, Manan and Mohd Zaidi, Jaafar and Mohammed Omar, Abdullah and Agus, Arsad and Nur Bashirah, Azli and Muslim, Abdurrahman and Yakasai, Faruk (2020) Comparing natural and synthetic polymeric nanofluids in a mid-permeability sandstone reservoir condition. Journal of Molecular Liquids, 317 (113947). pp. 1-13. ISSN 0167-7322

Augustine, Agi and Radzuan, Junin and Mohammed Omar, Abdullah and Mohd Zaidi, Jaafar and Agus, Arsad and Wan Rosli, Wan Sulaiman and M.N.A., MohdNorddin and Muslim, Abdurrahman and Azza, Abbas and Afeez, Gbadamosi and Nur Bashirah, Azli (2020) Application of polymeric nanofluid in enhancing oil recovery at reservoir condition. Journal of Petroleum Science and Engineering, 194 (107476). pp. 1-25. ISSN 0920-4105

Awang Hasim, Awang Sulong and Azhaili, Baharun and Raja Nur Syaheeza, Raja Mohd Yazit and Muyandy, T. (2023) Pilot Study on Underground Air Temperature for Interior Thermal Comfort of Building in Malaysia. IOP Conference Series: Earth and Environmental Science, 1218. pp. 1-13. ISSN 1755-1315

Azhaili, Baharun and Siti, Halipah Ibrahim and Mohammad Omar, Abdullah and Ooi, Koon Beng (2011) A Passive Malaysian Residential Building With A Hydronic Radiator. International Journal of Recent Research and Applied Studies, 7 (4). pp. 380-389. ISSN 2076-7366

Azreen, Ibrahim and Abu Zahrim, Yaser and Junidah, Lamaming (2021) Synthesising tannin-based coagulants for water and wastewater application: A review. Journal of Environmental Chemical Engineering, 9 (1). pp. 1-18. ISSN 2213-3437

Azrul Zulwali, Kifli and Siti Noor Linda, Taib and Wong, Chee Chung (2017) Physical Properties of Tropical Sibu Peat. Electronic Journal of Geotechnical Engineering, 22 (13). pp. 5273-5287.

Baharun, A. (2011) Experimental validation of energyPlus simulation of a single storey building. UNIMAS E-Journal of Civil Engineering, 2 (1).

Biao, He and Danial Jahed, Armaghani and Lai, Sai Hin and Pijush, Samui and Edy Tonnizam, Mohamad (2023) Applying data augmentation technique on blast-induced overbreak prediction : resolving the problem of data shortage and data imbalance. Expert Systems With Applications, 237 (Pt.C). pp. 1-14. ISSN 0957-4174

Biao, He and Danial Jahed, Armaghani and Lai, Sai Hin and Xuzhen, He and Panagiotis G., Asteris and Daichao, Sheng (2024) A deep dive into tunnel blasting studies between 2000 and 2023-A systematic review. Tunnelling and Underground Space Technology, 147. pp. 1-15. ISSN 1878-4364

Bong, C.H.J (2014) A Review on the Self-Cleansing Design Criteria for Sewer System. UNIMAS e-Journal of Civil Engineering, 5 (2). pp. 1-7. ISSN 1985-3874

Bong, C.H.J and Liow, C.V. (2019) Hydraulic characteristics of flow through angled baffle-plates in an open channel. International Journal of River Basin Management, 2019. ISSN 1571-5124

Bong, Charles Hin Joo and Lau, Tze Liang and Aminuddin, Ab Ghani and Chan, Ngaiweng (2016) Sediment deposit thickness and its effect on critical velocity for incipient motion. Water Science and Technology, 74 (8). pp. 1876-1884. ISSN 02731223

Bong, Charles Hin Joo and Laub, T.L. and Ghanic, A. Ab. (2016) Potential of tipping flush gate for sedimentation management in open stormwater sewer. Urban Water Journal, 13 (5). pp. 486-498. ISSN 1573-062X

Bong, Charles Hin Joo and Tze, Liang Lau and Aminuddin, Ab Ghani (2013) Sediment size and deposition characteristics in Malaysian urban concrete drains – a case study of Kuching City. Urban Water Journal, 11 (1). pp. 74-89. ISSN 1744-9006

Bong, Charles Hin Joo and Tze, Liang Lau and Aminuddin, Ab Ghani (2013) Hydraulics characteristics of tipping sediment flushing gate. Water Science & Technology, 68 (11). pp. 2397-2406. ISSN 1996-9732

Bong, David B L and Lai, K.C. and Joseph, A. (2009) Automatic Road Network Recognition and Extraction for Urban Planning. International Science Index, Civil and Environmental Engineering, 3 (5). ISSN 2409-0441

Bong, J.H.L (2010) Study the Structural Behaviour of Ferrocement Beam. UNIMAS e-Journal of Civil Engineering, 1 (2).

Borhan, M.M (2011) Laboratory study of water absorption of modified mortar. UNIMAS E-Journal of Civil Engineering, 2 (1).

Bridle, R. J. and Roberts, T. M. and Uran, N. and A. Razak, A. K. (2007) Testing and Analysis of Aluconcrete Beams. Journal of Materials in Civil Engineering, 19 (6). pp. 523-525. ISSN 0899-1561

Burmamu, B.R. and Law, P.L. (2015) Lagrangian Model Framework: A Cutting Edge towards Predicting Pollutants Transport in River Benue of Greater City Yola, Nigeria. Global Journal For Research Analysis, 4 (11). pp. 148-151. ISSN 2277 - 8160

CHARLES HIN JOO, BONG and ABIGAIL, JOSEP and E. R., MATTHEW and GABDA, Darmesah (2022) Site Specific Rainfall Temporal Pattern (RTP) for Sustainable Development of Kuching City, Sarawak, Malaysia. Journal of Sustainability Science and Management, 17 (6). pp. 52-65. ISSN 1823-8556

Chai, Neeping and Wan Azlan, Wan Zainal Abidin and Wan Hashim, Wan Ibrahim and Kismet, Hong Ping (2012) Technology advancement in vehicle monitoring system for accident prevention. Journal of Civil Engineering, Science and Technology, 3 (Sp. Is). pp. 24-33. ISSN 2462-1382

Chai, S.S. and Wong, W.K. and Goh, K.L. and Wang, H.H. and Wang, Y.C. (2019) Radial Basis Function (RBF) Neural Network: Effect of Hidden Neuron Number, Training Data Size, and Input Variables on Rainfall Intensity Forecasting. International Journal on Advanced Science Engineering and Information Technology, 9 (6). pp. 1921-1926. ISSN 2088-5334

Chan, Yi Herng and Adrian Chun Minh, Loy and Cheah, Kin Wai and Slyvester Yew Wang, Chai and Ngu, Lock Hei and How, Bing Shen and Claudia, Li and Serene Sow Mun, Lock and Wong, Mee Kee and Yiin, Chung Loong and Bridgid Lai Fui, Chin and Chan, Zhe Phak and Lam, Su Shiung (2023) Hydrogen sulfide (H2S) conversion to hydrogen (H2) and value-added chemicals : Progress, challenges and outlook. Chemical Engineering Journal, 458. pp. 1-22. ISSN 1873-3212

Chan, Yi Herng and Chan, Zhe Phak and Serene Lock, Sow Mun and Yiin, Chung Loong and Foong, Shin Ying and Wong, Mee Kee and Muhammad Anwar, Ishak and Quek, Ven Chian and Shengbo, Ge and Lam, Su Shiung (2023) Thermal pyrolysis conversion of methane to hydrogen (H2): A review on process parameters, reaction kinetics and techno-economic analysis. Chinese Chemical Letters. ISSN 1878-5964

Chan, Yi Herng and Lock, Serene Sow Mun and Wong, Mee Kee and Yiin, Chung Loong and Loy, Adrian Chun Minh and Cheah, Kin Wai and Chai, Slyvester Yew Wang and Li, Claudia and How, Bing Shen and Chin, Bridgid Lai Fui and Chan, Zhe Phak and Lam, Su Shiung (2022) A state-of-the-art review on capture and separation of hazardous hydrogen sulfide (H2S): Recent advances, challenges and outlook. Environmental Pollution, 314 (120219). pp. 1-20.

Chang, Josephine Hui Lai and Md. Rezaur, Rahman and Sinin, Hamdan and Mahbub, Hasan and Liew, Fui Kiew and Md. Mizanu, Rahman and Md. Faruk, Hossen (2017) Thermomechanical performance and high Brunauer-Emmett-Teller surface area of poly(vinyl alcohol)/silica/clay and poly(vinyl alcohol)/(fumed silica)/clay nanocomposites. Journal of Vinyl and Additive Technology, 23. pp. 119-127. ISSN 1548-0585

Charles Bong, Hin Joo and Leonard Lim, Lik Pueh and Ng, Chee Khoon and Chai, S. L. (2023) Detention Properties of Subsurface Stormwater Modules Under Tropical Climate. INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 15 (9). pp. 72-78. ISSN 2229-838X

Charles Hin Joo, Bong and S.C., Liew and J.E., Sim and F.Y., Teo (2023) TREND AND STATISTICAL ANALYSIS OF ANNUAL MAXIMUM DAILY RAINFALL (AMDR) FOR SARAWAK RIVER BASIN, SARAWAK, MALAYSIA. Journal of the Research Laboratory in Subterranean and Surface Hydraulic (53). pp. 183-197. ISSN 1112-3680

Cheah, Wai Shiang and Sim, Yee Wai and Nurfauzabt, Binti Jalia and Muhammad Asyraf, Bin Khairuddin (2019) Agent Oriented Methodology for Crime Modelling and Simulation. International Journal of Recent Technology and Engineering, 8 (2S8). p. 1359. ISSN 2277-3878

Chee, Khoon Ng and Kiang, Hwee Tan (2006) Flexural behaviour of externally prestressed beams. Part I: Analytical model. Engineering Structures, 28 (4). pp. 609-621. ISSN 0141-0296

Chee, Khoon Ng and Kiang, Hwee Tan (2006) Flexural behaviour of externally prestressed beams. Part II: Experimental investigation. Engineering Structures, 28 (4). pp. 622-633. ISSN 0141-0296

Chian, Haur Jong and Kai, Meng Tay and Chee, Peng Lim (2014) A New Fuzzy Ratio and Its Application to the Single Input Rule Modules Connected Fuzzy Inference System. 2014 IEEE International Conference on Fuzzy Systems (FUZZ-IEEE).

Chiew, Fei Ha and Lau, See Hung and Ng, Chee Khoon (2018) Monotonicity preserving SIRMs-connected fuzzy inference system for predicting HPC compressive strength. Intelligent Decision Technologies, 12 (3). pp. 293-302. ISSN 1872-4981

Chin, Hon Sin and Ting, Sim Nee and Lee, Yee Yong (2024) QUALITY MANAGEMENT CHALLENGES IN CONSTRUCTION PROJECTS: INVESTIGATING FACTORS, MEASURES, AND THE ROLE OF MATERIAL QUALITY CONTROL. Planning Malaysia Journal, 22 (3). pp. 63-78. ISSN 1675-6215

Chin, Ying Teh and Tay, Kai Meng and Chee, Peng Lim (2013) Interval-based and fuzzy set-based approaches to modeling of fuzzy inference systems with the local monotonicity property. 2013 IEEE International Conference on Fuzzy Systems (FUZZ). ISSN 1098-7584 (Print)

Chin, Ying Teh and Yi, Wen Kerk and Tay, Kai Meng and Chee, Peng Lim (2018) On Modelling of Data-Driven Monotone Zero-Order TSK Fuzzy Inference Systems using a System Identification Framework. IEEE Transactions on Fuzzy Systems, 26 (6). pp. 3860-3874. ISSN 10636706

Chin Peow, Woon and Poi, Ngian Shek and Mahmood, Bin Md Tahir and Ahmad Kueh, Beng Hong (2015) Compressive strength of ground waste seashells in cement mortars for masonry and plastering. Applied Mechanics and Materials, 727. pp. 167-170. ISSN 1662-7482

Ching, Vern Liow and Yau, Darrien Seng Mah and Marlinda, Abdul Malek (2019) Modelling of StormPav Green Pavement System Using Storm Water Management Model and SolidWorks Flow Simulation. International Journal of Recent Technology and Engineering (IJRTE), 8 (2). pp. 4673-4679. ISSN 2277-3878

Ching, Vern Liow and Yau, Darrien Seng Mah and Mohd Remy Rozainy, bin Mohd Arif Zainol (2019) Modelling of StormPav Green Pavement System with Storm Water Management Model and InfoWorks Collection System. International Journal of Recent Technology and Engineering (IJRTE), 8 (2). pp. 1449-1452. ISSN 2277-3878

Chong, K.H and Law, P.L and Rigit, A.R.H. and Baini, R. and Saleh, S.F and Awangku Yussuf, A.A.R (2014) Operational Parameters Assessment of a Biomass-To-Fuel Gas Converter. UNIMAS e-Journal of Civil Engineering, 5 (1).

Chua, David Sing Ngie and Goh, W.J. and Lim, S.F. and Jospeh, A. and Oon, Y.B. and Sia, C.V (2018) Development of an Automatic Vehicular Heatstroke Detection System. IOP Conference Series: Materials Science and Engineering, 429. ISSN 17578981

Chun, Adrian Minh Loy and Juin, Yau Lim and Bing, Shen How and Yiin, Chung Loong and Sow, Serene Mun Lock and Lam, Ghai Lim and Hatem, Alhamzi and Yoo, ChangKyoo (2023) Rethinking of the future sustainable paradigm roadmap for plastic waste management: A multi-nation scale outlook compendium. Science of The Total Environment. pp. 1-15. ISSN 0048-9697

Chung, Loong Yiin and Suzana, Yusup and Mustakimah, Mohamed and Parncheewa, Udomsap and Boonyawan, Yoosuk and Sittha, Sukkasi (2016) Stabilization of Empty Fruit Bunch derived Bio-oil using Solvents. Journal of Sustainable Development of Energy, Water and Environment Systems, 4 (1). pp. 38-47.

Chung Loong, Yiin (2021) A Molecular Simulation Study of Silica/Polysulfone Mixed Matrix Membrane for Mixed Gas Separation. Polymers, 2021 (13). pp. 1-28. ISSN 2073-4360

Chung Loong, Yiin and Elatta, Odita and Serene Sow Mun, Lock and Kin Wai, Cheah and Yi, Herng Chan and Mee, Kee Wong and Bridgid Lai Fui, Chin and Armando T., Quitain and Soh, Kheang Loh and Suzana, Yusup (2022) A review on potential of green solvents in hydrothermal liquefaction (HTL) of lignin. Bioresource Technology, 364 (128075). pp. 1-12. ISSN 0960-8524

Chung Loong, Yiin and Herng Chan, Yi and Serene Sow Mun, Lock and Kee Wong, Mee and Adrian Loy, Chun Minh and Wai Cheah, Kin and Slyvester Wang Chai, Yew and Claudia, Li and Shen How, Bing and Bridgid Lai Fui, Chin and Phak Chan, Zhe and Shiung Lam, Shiu (2022) A state-of-the-art review on capture and separation of hazardous hydrogen sulfide (H2S): Recent advances, challenges and outlook. Environmental Pollution, 314. pp. 1-20. ISSN 0269-7491

Chung Loong, Yiin and Kok Liang, Yap and Fui Chin, B. L. and Mun Lock, S. S. (2022) Insights into the Lignin Dissolution Mechanism of Water Content Tailored-choline Chloride (ChCl) Based Green Solvents for Biomass Pretreatment. Physical Chemistry Research, 11 (3). pp. 605-614. ISSN 2345-2625

D. Azra, Awang Mat and N. Syuhada, Hasim and Nurmiza, Othman and Amira, Amran and D. Norkhairunnisa, Abang Zaidel and A. S. Wani, Marzuki and Shafrida, Sahrani and Kismet, Hong Ping and Rohana, Sapawi (2017) Integrated Open Loop Resonator Filter Designed with Notch Patch Antenna for Microwave Applications. Telkomnika (Telecommunication Computing Electronics and Control), 15 (3). pp. 1485-1492. ISSN 1693-6930

D.Y.S., Mah and J.O.K., Ngu and Norazlina, Bateni and F.J., Putuhena (2021) Modelling the Outlet of Multi-Chamber Stormwater Detention System. Science and Technology Asia, 26 (3). pp. 77-89. ISSN 2586-9000, 2586-9027

Danial Jahed, Armaghani and Biao, He and Edy Tonnizam, Mohamad and Zhang, Y. X. and Lai, Sai Hin and Fei, Ye (2023) Applications of Two Neuro-Based Metaheuristic Techniques in Evaluating Ground Vibration Resulting from Tunnel Blasting. Mathematics, 11 (1). pp. 1-17. ISSN 2227-7390

Daniel Tang, Kuok Ho and Serene Sow, Mun Lock and Yap, Pow-Seng and Cheah, Kin Wai and Chan, Yi Herng and Chung Loong, Yiin and Andrian Zi, En Ku and Adrian Chun, Minh Loy and Bridgid Lai, Fui Chin and Chai, Yee Ho (2022) Immobilized enzyme/microorganism complexes for degradation of microplastics: A review of recent advances, feasibility and future prospects. Science of The Total Environment, 832 (154868). pp. 1-21. ISSN 0048-9697

Danish, Ahmed and Siti Noor Linda, Taib and Tahar, Ayadat and Alsidqi, Hasan (2022) Numerical Analysis of the Carrying Capacity of a Piled Raft Foundation in Soft Clayey Soils. Civil Engineering Journal, 8 (4). pp. 622-636. ISSN 2476-3055

Danish, Ahmed and Siti Noor Linda, Taib and Tahar, Ayadat and Alsidqi, Hasan (2021) Numerical investigation on the performance of stone columns under raft foundation in soft clayey soils. IOP Conference Series: Materials Science and Engineering. pp. 1-8. ISSN 1757-899X

Danish, Ahmed1 and Siti Noor Linda, Taib and Tahar, Ayadat2 and Alsidqi, Hasan (2021) A Review on the Behaviour of Combined Stone Columns and Pile Foundations in Soft Soils when Placed under Rigid Raft Foundation. ASM Science Journal, 16 (2021). pp. 1-8. ISSN 1823-6782

Darrien Yau Seng, Mah and Dayang Nur Huwaida, Abang Sulaiman and Teo, Fang Yenn (2023) Investigation of Historical Extreme Rainfall on Permeable Road in a Commercial Centre. Larhyss Journal (53). pp. 165-182. ISSN 1112-3680

Darrien Yau Seng, Mah and Janice Lynn, Ayog and Afdal Haziq, Mohammad Salehe (2022) Dual-system concept for stormwater control in commercial centre. International Journal of Advanced Technology and Engineering Exploration, 9 (86). pp. 1-15. ISSN 2394-7454

Darrien Yau Seng, Mah and Johnny Ong King, Ngu and Caroline, Peter Diman and Marlinda, Abdul Malek (2022) Examining the impacts of individual lot stormwater detention in a housing estate. Asia-Pacific Journal of Science and Technology, 27 (1). pp. 1-10. ISSN 2539-6293

Darrien Yau Seng, Mah and Johnny Ong King, Ngu and Siti Noor Linda, Taib and Soh Fong, Lim and F.J., Putuhena (2022) Testing the Concept of Mitigating Urban Flooding with Permeable Road: Case Study of Tong Wei Tah Street, Kuching City, Sarawak, Malaysia. Trends in Sciences, 19 (15). pp. 1-11. ISSN 2774-0226

Darrien Yau Seng, Mah and Rosmina, Ahmad Bustami and Frederik Josep, Putuhena and Marelianda, Al Dianty (2022) Mitigating street flooding with permeable structures : A modelling case study. Songlanakarin Journal of Science and Technology, 44 (4). pp. 1091-1098. ISSN 2408-1779

David Chua, S.N. and Chan, B.K. and Lim, S.F. (2019) Experimental and simulation study of thermal accumulation in an enclosed vehicle. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 233 (14). p. 3621. ISSN 0954-4070

Dawood, Eethar Thanon and Yahya Ziad, Mohammad and Waleed, Abdulrazzak Abbas and Mohammad, Abdul Mannan (2018) Toughness, elasticity and physical properties for the evaluation of foamed concrete reinforced with hybrid fibers. Heliyon, 4. pp. 1-15. ISSN 2405-8440

Dayangku Salma, Awang Ismail and Azman, Kassim (2020) Monitoring of Deformation Behaviour of Unsaturated Soil Slope using Distributed Optical Fibre Sensor. INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 12 (9). pp. 199-207. ISSN 2600-7916

Dayangku Salma, Awang Ismail and Siti Noor Linda, Taib and Norazzlina, M. Sa'don (2023) Numerical Modelling of Slope Stability and Transient Seepage Analysis : Jalan Puncak Borneo Road Case Study. International Journal of Integrated Engineering, 15 (6). pp. 32-42. ISSN 2600-7916

Dayangku Salma, Binti Awang Ismail and Azman, Bin Kassim and Hisham, Bin Mohamad and Ahmad Safuan, Bin A. Rashid and Aliff Ridzuan, Bunawan (2018) Application of Brillouin-based distributed optical fibre sensing technology to measure strain development of a slope model. MATEC Web of Conferences, 250. pp. 1-12. ISSN 2261-236X

Dhevisha, Sukumarran and Khairunnisa, Hasikin and Anis Salwa, Mohd Khairuddin and Romano, Ngui and Wan Yusoff, Wan Sulaiman and Indra, Vythilingam and Paul Cliff Simon, Divis (2024) Machine and deep learning methods in identifying malaria through microscopic blood smear : A systematic review. Engineering Applications of Artificial Intelligence, 133 (Pt. E). pp. 1-19. ISSN 1873-6769

E. E., Putri and F. J. H., Rewani and Mohammad Abdul, Mannan and Wan Hashim, Bin Wan Ibrahim and Mohamad Raduan, Hj. Kabit and Larry, Anak Silas Tirau and Ron Aldrino, Chan@Ron Buking (2019) Sensitivity analysis of stormpav composite pavement. IOP Conference Series: Materials Science and Engineering, 602. pp. 1-12. ISSN 1757-899X

Elatta, Odita and Yiin, Chung Loong and Jennie Ngu, Siew Zhen and Armando T., Quitain and Serene Lock, Sow Mun and Bridgid Chin, Lai Fui and Md Rezaur, Rahman (2023) Sustainable Biomass-to-Energy Transformation : Choline Chloride Based Deep Eutectic Solvent for Lignin Extraction and Liquefaction. Chemical Engineering Transaction, 103. pp. 31-36. ISSN 2283-9216

Elsa, Eka Putri and Rina, Yuliet and Seng, Cheh Hoo and Md, Abdul Mannan and Larry, Silas Tirau and Wan Hashim, Wan Ibrahim and Mohamad Raduan, Kabit and Ron, . and Sadia, Tasnim (2020) StormPav Green Pavement the environmentally friendly pavement. E3S Web of Conferences, 156 (05008). pp. 1-6. ISSN 2267-1242

Elsa, Eka Putri and Rina, Yuliet and Seng, Cheh Hoo and Mohammad, Abdul Mannan and Larry, Silas Tirau and Wan Hashim, Wan Ibrahim and Mohamad Raduan, Kabit and Ron, Aldrino Chan and Sadia, Tasnim (2020) StormPav Green Pavementthe environmentally friendly pavement. E3S Web of Conferences, 156 (05008). pp. 1-6. ISSN 2267-1242

Elsa Eka, Putri and Liew, S. C. and Mohammad Abdul, Mannan and Ron Aldrino, Chan@Ron Buking and Larry, Silas Tirau (2022) STORMPAY PAVEMENT USING DIFFERENT WHEEL LOADS. International Journal of GEOMATE, 22 (89). pp. 1-8. ISSN 2186-2982

Eng, Wee-Hiang and Ho, Wei-Seng (2019) Polyploidization using colchicine in horticultural plants: A review. Scientia Horticulturae, 246. pp. 604-617. ISSN 0304-4238

Ervina, J., and Ghaleb, Z.A., and Hamdan, S., and Mariatti, M. (2019) Colloidal stability of water-based carbon nanotube suspensions in electrophoretic deposition process: Effect of applied voltage and deposition time. Composites Part A: Applied Science and Manufacturing, 117. pp. 1-10. ISSN 1359-835X

Ervina, Junaidi and Sinin, Hamdan and Md. Rezaur, Rahman (2023) Electrophoretic Deposition (EPD) of Multi-Walled Carbon Nanotubes (Mwcnts) Onto Carbon Fiber (CF) Fabric. INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 15 (5). pp. 160-166. ISSN 2229-838X

Erwan, Sukarman and Abdul Razak, Abdul Karim and Norazzlina, M.Sa'don and Abdul Azim, Abdullah and Siti Hanim, Sahari and Nur Liza, Rahim and Pierre, Quenneville (2024) Evaluating the SWS bolted connection strength of Bitis wood. Research on Engineering Structures and Materials, 10 (1). pp. 23-40. ISSN 2148-9807

Erwan Hafizi, Kasiman and Ahmad Kueh, Beng Hong and Airil Yasreen, Mohd Yassin and Norsarahaida, Saidina Amin and Mugahed, Amran and Roman, Fediuk and Evgenii Vladimirovich, Kotov and Gunasekaran, Murali (2022) Mixed Finite Element Formulation for Navier–Stokes Equations for Magnetic Effects on Biomagnetic Fluid in a Rectangular Channel. Materials, 15 (8). pp. 1-17. ISSN 1996-1944

Faatima Zahra, Ahmat Asim and Norsuzailina, Mohamed Sutan (2015) Thermal Characterization of Pozzolanic Activity of Hydrated Cement System Modified by Silica Based Industrial Waste. Journal of Applied Science & Process Engineering, 2 (1). pp. 1-7. ISSN 2289-7771

Fabian Halley Pata, Alban Dattu and Syed Tarmizi, Syed Shazali and Magdalene, Andrew Munot and Abang Mohamad Aizuddin, Abang Mohd Mohtar and Noor Hisyam, Noor Mohamed (2018) Simulation Study of a Futsal Ball Deformation in Normal Impact Using Finite Element Method. International Journal of Modeling and Optimization, 8 (3). pp. 188-192. ISSN 2010-3697

Fadzli, Mohamed Nazri and Ramadhansyah, Putra Jaya and Badorul Hisham, Abu Bakar and Raudhah, Ahmadi (2016) Fire resistance of ultra-high performance fibre reinforced concrete due to heating and cooling. MATEC Web of Conferences, 87. pp. 1-9. ISSN 2261236X

Faisal, Amsyar and Cher, Siang Tan and Arizu, Sulaiman and Shahrin, Mohammad (2023) Semi‑rigid Composite Beam‑to‑column Joints for Cold‑formed Steel Frames : Experimental and Numerical Study. International Journal of Steel Structures, 23. pp. 1-19. ISSN 2093-6311

Faisal, Amsyar and Cher, Siang Tan and Shahrin, Mohammad and Mahmood, Md Tahir and Hazlan, Abdul Hamid (2021) Partial Strength Beam-to-column Connection of Cold-formed Single Channel Section: Numerical and Experimental Study. ASM Science Journal, 14. pp. 1-11. ISSN 1823-6782

Faisal, Amsyar and Cher Siang, Tan and Chau Khun, Ma and Arizu, Sulaiman (2018) Review on Composite Joints for Cold-Formed Steel Structures. E3S Web of Conferences, 65 (08006). pp. 1-11. ISSN 2267-1242

Faisal, Amsyar and Ma, Chau Khun and Wahid, Omar and Abdullah Zawawi, Awang and Shek, Poi Ngian (2019) Behaviour of lightweight foamed concrete with pre-tensioning steel straps confinement. IOP Conf. Series: Earth and Environmental Science, 220. pp. 1-11. ISSN 1755-1315

Faisal, Amsyar and Tan, Cher Siang and Arizu, Sulaiman and Ma, Chau Khun (2020) Numerical and experimental study of semi-rigid beam-to-column composite connections in cold-formed steel. AIP Conference Proceedings, 2284 (1). pp. 1-10. ISSN 1551-7616

Faisal Amsyar, Redzuan (2024) Design Analysis of Sustainable Composite Slab using Profiled Steel Sheeting : A Case Study based on BS 5950-4: 1994 and EN 1994-1-1: 2004. E3S Web of Conferences, 589 (04007). pp. 1-10. ISSN 2267-1242

Faizal, Bin Baharum and Muhamad Hanif, Bin Hassan and Mohd Dzulkarnaen, Bin Sudirman and Mohd Nasrun, Bin Mohd Nawi and Siti Halipah, Binti Ibrahim (2018) A Comparative Study of Levelized Cost of Electricity Between Photovoltaic and Concentrated Solar Powered Power Plants in Malaysia. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 50 (2). pp. 134-145. ISSN 2289-7879

Farhana, Yasmin and Khairul Fikri, Tamrin and Nadeem Ahmed, Sheikh and Pierre, Barroy and Abdullah, Yassin and Amir Azam, Khan and Shahrol, Mohamaddan (2021) Laser-Assisted High Speed Machining of 316 Stainless Steel: The Effect of Water-Soluble Sago Starch Based Cutting Fluid on Surface Roughness and Tool Wear. Materials, 14 (5). pp. 1-23. ISSN 1996-1944

Fei, Ha Chiew and Chee, Khoon Ng and Kok, Chin Chai and Tay, Kai Meng (2017) A Fuzzy Adaptive Resonance Theory-Based Model for Mix Proportion Estimation of High-Performance Concrete. Computer-Aided Civil and Infrastructure Engineering, 32 (9). ISSN 1467-8667

Flora, Albert Daud and Idawati, Ismail and Raudhah, Ahmadi and Nur Amalina Shairah, Abdul Samat (2020) Characterization of Alkali-Activated Palm Oil Fuel Ash Pastes as a Function of Calcination Temperatures of Raw Precursor. Materials Performance and Characterization, 9 (1). pp. 36-49. ISSN 2379-1365

Florianna Lendai, Michael Mulok and Helmi, Sumilan and Zainon, Noor Zainura (2017) Assessment of city's sustainability performance via Fuzzy Lingustic Scale: East Malaysia case study. Ecological Indicators. ISSN 1470-160X (Submitted)

Foong, S. Y. and Chan, Y. H. and Yiin, Chung Loong and Lock, Serene Sow Mun and Loy, Adrian Chun Minh and Lim, J. Y. and Yek, P. N. Y. and Wan Mahari, W. A. and Liew, R. K. and Peng, W. and Tabatabaei, M. and Aghbashlo, M. and Lam, Su Shiung (2023) Sustainable CO2 capture via adsorption by chitosan-based functional biomaterial : A review on recent advances, challenges, and future directions. Renewable and Sustainable Energy Reviews, 181. pp. 1-22. ISSN 1364-0321

Foong, Shin Ying and Bridgid Chin, Lai Fui and Serene Lock, Sow Mun and Yiin, Chung Loong and Tan, Yie Hua and Guiyang, Zheng and Shengbo, Ge and Rock Keey, Liew and Lam, Su Shiung (2024) Enhancing wastewater treatment with engineered biochar from microwave-assisted approach - A comprehensive review. Environmental Technology & Innovation, 36. pp. 1-27. ISSN 2352-1864

Foong, Shin Ying and Chan, Yi Herng and Peter Yek, Nai Yuh and Serene Lock, Sow Mun and Bridgid Lai, Fui Chin and Yiin, Chung Loong and John Lan, Chi-Wei and Lam, Su Shiung (2024) Microwave-assisted pyrolysis in biomass and waste valorisation : Insights into the life-cycle assessment (LCA) and techno-economic analysis (TEA). Chemical Engineering Journal, 491. pp. 1-18. ISSN 1873-3212

Foong, Shin Ying and Cheong, Kah Yein and Kong, Sieng Huat and Yiin, Chung Loong and Peter Nai Yuh, Yek and Rizwan, Safdar and Liew, Rock keey and Loh, Soh Kheang and Lam, Su Shiung (2023) Recent progress in the production and application of biochar and its composite in environmental biodegradation. Bioresource Technology, 387. pp. 1-13. ISSN 1873-2976

Fui, Kiew Liew and Sinin, Hamdan and Md Rezaur, Rahman and Mohamad Rusop, Mahmood and Chang, Josephine Hui Lai (2017) The effects of nanoclay and tin(IV) oxide nanopowder on morphological, thermo-mechanical properties of hexamethylene diisocyanate treated jute/bamboo/polyethylene hybrid composites. Journal of Vinyl and Additive Technology, 23. pp. 119-127. ISSN 1548-0585

Gaddafi, Ismaili and Badorul Hisham, Abu Bakar and Khairul Khuzaimah, Abdul Rahim (2011) Basic and Grade Stress for Some Timber in Sarawak. UNIMAS E-Journal of Civil Engineering, 2 (2). pp. 35-38. ISSN 2462-1382

Gaddafi, Ismaili and Badorul Hisham, Abu Bakar and Khairul Khuzaimah, Abdul Rahim (2011) The Behavior of Strength Properties from Three Different Tree Boles of Aras in Sarawak. UNIMAS E-Journal of Civil Engineering, 2 (2). pp. 48-52. ISSN 2462-1382

Gaddafi, Ismaili and Badorul Hisham, Abu Bakar and Khairul Khuzaimah, Abdul Rahim (2011) Evaluation of Acacia Mangium in Structural Size at Green Condition. UNIMAS E_Hournal of Civil Engineering, 2 (2). pp. 17-22.

Gaddafi, Ismaili and Ellyne, Enduat and Nur Syahina, Yahya and Fanthy Moola, Malek and Noor Azland, Jaimudin and Khairul Khuzaimah, Abdul Rahim and Mohd Effendi, Wasli and Meekiong, Kalu and Iskanda, Openg and Ahmad Nurfaidhi, Rizalman and Jack, Liam and Biha, Razali (2022) Physical and Mechanical Properties Performance between Untreated and Treated with CCA Treatment at Different Age Groups of Fast-Growing Acacia Hybrid of Sarawak. Forests, 13 (1969). pp. 1-18. ISSN 1999-4907

Geok Teng, Leong and Charles Hin Joo, Bong (2022) Factors Affecting the Efficiency of Hydraulic Flushing in Sewer System for Sedimentation Control: A Review. Journal of Optimization in Industrial Engineering, 15 (2). pp. 99-106. ISSN 2423-3935

Ghulam, Hussain and Abdul Qadeer, Malik and Khairuddin, Sanaullah (2011) The Waveshaper Effect on Ta-MS Multiliner Explosive Formed Pojectile with Tantalum as Penetrator and Mild Steel as Stabilization Base. Mehran University Research Journal Of Engineering & Technology, 30 (3). ISSN 0254-7821]

H. R., Ramji and S. L., Leo and I. A. W., Tan and M. O., Abdullah (2014) Comparative Study of Three Different Adsorbent-Adsorbate Working Pairs for a Waste Heat Driven Adsorption Air Conditioning System Based On Simulation. International Journal of Recent Research and Applied Studies, 18 (2). pp. 109-121. ISSN 2349-4891

Haidar, A.M.A. and Julai, N. (2019) An improved scheme for enhancing the ride-through capability of grid-connected photovoltaic systems towards meeting the recent grid codes requirements. Energy for Sustainable Development, 50. pp. 38-49. ISSN 0973-0826

Hammida, S.A. and Ahmad, F. (2015) Chemotype of litsea cubeba essential oil and its bioactivity. Natural Product Communications, 10 (7). pp. 1301-1304. ISSN 1934578X

Hasan, A. Rahman and Sahdi, Fauzan and Norsuzailina, Sutan and Mijan, N. and Sinin, Hamdan (2018) Strength Behavior of Sedimented Gypsum Slurry. Geotechnical Testing Journal, 41 (6). pp. 1155-1165. ISSN 1945-7545

Hasan, Alsidqi (2016) Preface. MATEC Web of Conferences, 87. ISSN 2261236X

Heidarpour, Amin and Abdul Azim, Abdullah and Bradford, Mark A. (2009) Non-linear inelastic analysis of steel arches at elevated temperatures. Journal of Constructional Steel Research, 66 (4). pp. 512-519. ISSN 0143-974X

Hin, Charles Joo Bong and Liew, Chuin Liew and Fang, Yenn Teo and Tze, Liang Lau and Aminuddin, Ab Ghani (2021) Critical shear stress approach for self-cleansing design of a rectangular channel. International Journal of Sediment Research. ISSN 1001-6279

Hojati, A.T and Ferreira, L. and Charles, P. and Kabit, M.R (2012) Analysing freeway traffic incident duration using an Australian data set. J. Road Transp. Res., 21 (2). pp. 19-31.

Hongyan, Zang and Annie, Joseph and Shourong, Zhang and Rong, Liu and Wanzhen, Wang (2023) Review of Wheat Disease Classification and Severity Detection Models. Application of Modelling and Simulation, 7 (2023). pp. 201-213. ISSN 2600-8084

Huat, Chia Yu and Danial Jahed, Armaghani and Lai, Sai Hin and Haleh, Rasekh and He, Xuzhen (2023) Simulation of Surface Settlement Induced by Parallel Mechanised Tunnelling. Sustainability, 15 (17). pp. 1-21.

Huat, Chia Yu and Danial Jahed, Armaghani and Lai, Sai Hin and Hossein, Motaghedi and Panagiotis G., Asteris and Pouyan, Fakharin (2024) Analyzing surface settlement factors in single and twin tunnels : A review study. Journal of Engineering Research. pp. 1-13. ISSN 2307-1877

Husin, M. H. and Rahmat, M. F. and Wahab, N. A. and Sabri, M.F.M. (2021) Improving total nitrogen removal using a neural network ammonia-based aeration control in activated sludge process. INTERNATIONAL JOURNAL ON SMART SENSING AND INTELLIGENT SYSTEMS, 14 (1). pp. 1-16. ISSN 1178-5608

Husin, M.H. and Leong, S.Y. and Sabri, M.F.M. (2013) Built in self test for RAM using VHDL. IEEE Colloquium on Humanities, Science and Engineering (CHUSER), 2012. ISSN ISBN: 978-1-4673-4617-7

Ibrahim, S.H and Baharun, A. and Nawi, M.N.M and Junaidi, E. (2014) Assessment of thermal comfort in the mosque in Sarawak, Malaysia. International Journal of Energy and Environment, 5 (3). pp. 327-334. ISSN 2076-2909

Imran, Muhammad Syukri and Azhaili, Baharun and Siti Halipah, Ibrahim and Wan Azlan, Wan Zainal Abidin (2017) Investigation of earth tube system application in low income building in Kuching, Sarawak. Journal of Engineering Science and Technology, 12 (6). pp. 1433-1445. ISSN 18234690

Imtiyaz Akbar, Najar and Raudhah, Ahmadi and Yunika Kirana, Abdul Khalik and Nurul Zawiyah, Mohamad and Mohd Azizul Hafiz, Jamian and Nadeem Akbar, Najar (2022) A Framework of Systematic Land Use Vulnerability Modeling Based on Seismic Microzonation : A Case Study of Miri District of Sarawak, Malaysia. International Journal of Design & Nature and Ecodynamics, 17 (5). pp. 669-677. ISSN 1755-7445

Imtiyaz Akbar, Najar and Raudhah, Ahmadi and Yunika Kirana, Abdul Khalik and Siti Noor Linda, Taib and Norsuzailina, Mohamed Sutan and Nur Hisyam, Ramli (2023) Soil Suffusion under the Dual Threat of Rainfall and Seismic Vibration. International Journal of Design & Nature and Ecodynamics, 18 (4). pp. 849-860. ISSN 1755-7445

Irfan, Ahmad Afip and Siti Noor Linda, Taib and Kamaruzaman, Jusoff and Liyana, Ahmad Afip (2019) Measurement of Peat Soil Shear Strength Using Wenner Four-Point Probes and Vane Shear Strength Methods. International Journal of Geophysics, 2019. ISSN 1687-8868

Isa Ebtehaj and Hossein Bonakdari and Amir Hossein Zaji and Hin Charles Joo Bong and Aminuddin Ab Ghani (2016) Design of a new hybrid artificial neural network method based on decision trees for calculating the Froude number in rigid rectangular channels. Journal of Hydrology and Hydromechanics, 64 (3). pp. 252-260. ISSN 0042790X

J, Matarul and M A, Mannan and N, Yussop and M Z, Endut and A, Ibrahim (2019) Optimising concrete enhancement of local ready-mix concrete partially replaced with local fly-Ash. Journal of Physics: Conference Series.

Jacqueline Teo, Richard and Norazzlina, M.Sa'don and Abdul Razak, Abdul Karim (2021) Artificial Neural Network (ANN) Model for Shear Strength of Soil Prediction. Defect and Diffusion Forum, 411 (2021). pp. 157-168. ISSN 1662-9507

Jahidul, Islam and Faisal I., Chowdhury and Wahidur, Raza and Xianghui, Qi and Rezaur, Rahman and Jagotamoy, Das and Jamal, Uddin and Hossain M., Zabed (2021) Toward polymer composites based and architectural engineering induced flexible electrodes for lithium-ion batteries. Renewable and Sustainable Energy Reviews, 148 (11130). pp. 1-20. ISSN 1364-0321

Jakhrani, A.Q. and Othman, A.K. and Rigit, A.R.H. and Samo, S.R. and Kamboh, S.A (2012) A novel analytical model for optimal sizing of standalone photovoltaic systems energy. Energy, 46 (1). pp. 675-682.

Jamil, Matarul and Chiew, Fei Ha and Md. Abdul, Mannan and Azmi, Ibrahim and Ezze Elma, Mohd. Yusof (2019) Relationship between Compressive strength and Ultra-Sonic Pulse Velocity (UPV) of Local Fly Ash Concrete. Journal of Engineering and Applied Sciences, 14 (3). pp. 6085-6088. ISSN 1816-949X

Jamil, Matarul and Mohammad, Abdul Manan and Noor Azland, Jainudin and Amir, Nazaruddin and Abang, Fhaeizdhyall (2020) The Perceptions among the Construction Industry on the Induced Chloride Corrosion for Reinforced Concrete Structure in Sarawak. Journal of Advanced Researchin Social and Behavioural Sciences, 21 (1). pp. 11-18. ISSN 2462-1951

Jamilu, Usman and Mohd Hafiz Dzarfan, Othman and Ahmad Fauzi, Ismail and Mukhlis, A. Rahman and Juhana, Jaafar and Yusuf Olabode, Raji and Afeez O., Gbadamosi and Tijjani Hassan, El Badawy and Khairul Anwar, Mohamad Said (2021) An overview of superhydrophobic ceramic membrane surface modification for oil-water separation. Journal of Materials Research and Technology, 12 (2021). pp. 643-667. ISSN 2238-7854

Ji, Hong Kang and Majid, Mirzaei and Lai, Sai Hin and Adnan, Dehghani and Amin, Dehghani (2024) Implementing generative adversarial network (GAN) as a data-driven multi-site stochastic weather generator for flood frequency estimation. Environmental Modelling & Software, 172. pp. 1-14. ISSN 1364-8152

Jiancheng, Shan and Changsaar, Chai and Hunchuen, Gui and Yaoli, Xiong (2021) Enhancing Project Integration Using Cloud-based Building Information Modelling: A Conceptual Model. International Journal of Advanced Research in Technology and Innovation, 3 (3). pp. 12-25. ISSN 2682-8324

Johari, A.H. and Law, P.L and Taib, S.N.L. and Yong, L.K. (2017) Assessment of Soil Erosion by Simulating Rainfall on an Equatorial Organic Soil. Journal of Civil Engineering, Science and Technology, 8 (2). pp. 72-81. ISSN 2462-1382

Johari, A.H. and Law, P.L. and Taib, S.N.L. and Darrien, M.Y.S. and Yong, L.K. (2018) Development of Rainfall Erosivity (R) In Revised Universal Soil Loss Equation (RUSLE) For An Equatorial Region Of Sarawak. The International Journal of Engineering and Science (IJES), 7 (4). pp. 24-35. ISSN 2319–1813

Jong, L.Y. and Teo, DCL and Mannan, Mohammad Abdul and Teo, Delsye Ching Lee (2019) Characteristics of Artificial Lightweight Aggregates Produced from Palm Oil Fuel Ash and Fly Ash Using Cold-Bonding. International Journal of Research in Engineering & Advanced Technology, 7 (4). pp. 8-12. ISSN 2320-8791

Jong, Lee Yee and Teo, DCL (2015) Concrete Containing Palm Oil Fuel Ash (POFA) and Oil Palm Shell (OPS) Subjected to Elevated Temperatures. UNIMAS e-Journal of Civil Engineering. ISSN 1984-3874

Jungan, Karvin and Leonard Lik Pueh, Lim and Ivy Tan, Ai Wei (2022) DETERMINATION OF SUITABLE BIOCHAR PRECURSOR AS ALTERNATIVE FOR ENABLING ACCESS TO CLEAN WATER SUPPLY IN RURAL AREAS. Journal of Sustainability Science and Management, 17 (5). pp. 66-78. ISSN 2672-7226

Junidah, Lamaming and Sariah, Saalah and Mariani, Rajin and Noor Maizura, Ismail and Abu Zahrim, Yaser (2022) A Review on Bamboo as an Adsorbent for Removal of Pollutants for Wastewater Treatment. International Journal of Chemical Engineering, 2022. pp. 1-14. ISSN 1687-806X

Jupiter, T. and Hj Rashidi, A. and Ismail, I. (2010) Effect of seawater on the properties of Epoxy Modified Concrete. UNIMAS E-Journal of Civil Engineering, 1 (2).

Kamran Ahmed, Samo and Imran Ahmed, Samo and Zafar Ali, Siyal and Andrew Ragai Henry, Rigit (2020) Determination of Potential Tidal Power Sites at East Malaysia. Engineering, Technology & Applied Science Research, 10 (4). pp. 6047-6051.

Kasumawati, Lias (2023) Biosensor Technologies In Sports : Advancements, Challenges, and Future Directions. The Ingenieur : Magazine of Board of Engineers Malaysia, 95 (7-9). pp. 36-43.

Kennedy, Jadum and Kuan, Nicholas Hoo Tien and Mahshuri, Yusof and Sim, Nee Ting and Chee, Khoon Ng (2019) Mechanical Properties of Betel Nut Husk Fibre Reinforced Oxo-HDPE Composite. Journal of Applied Science & Process Engineering, 6 (2). pp. 378-385. ISSN 2289-7771

Khadija, Asif and Serene Sow Mun, Lock and Syed Ali Ammar, Taqvi and Norwahyu, Jusoh and Chung Loong, Yiin and Bridgid Lai Fui, Chin (2023) A molecular simulation study on amine-functionalized silica/polysulfone mixed matrix membrane for mixed gas separation. Chemosphere, 311 (1). pp. 1-13. ISSN 0045-6535

Khairisya, Roslan and Norazlina, Bateni (2022) Environmental Aspects of StormPav Green Pavement Using SWMM at Padungan Commercial Center. Journal of Water Resources Management, 3 (1). pp. 1-15.

Khairul Anwar, Mohamad Said and Genevieve Gadung, George and Nurul Ain, Mohamed Alipah and Nor Zakirah, Ismail and Ramizah Liyana, Jama'In (2016) Effect of activated carbon in PSF-PEI-Ag symmetric membrane. MATEC Web of Conferences, 87. ISSN 2261236X

Khairul Anwar, Mohamad Said and Mohamed Afizal, Mohamed Amin and Ibrahim, Yakub and Md Rezaur, Rahman and Ahmad Beng Hong, Kueh and Sinin, Hamdan and Mohammed, M. Rahman (2023) Methylene blue adsorption mechanism onto palm kernel shell-derived activated carbon : From particle diffusion to site adsorption. BioResources, 18 (3). pp. 5120-5132. ISSN 1930-2126

Khairul Anwar, Mohd. Said and Mohamed Afizal, Mohamed Afizal and Justina Luisa, Janis and Dayang Norafizan, Awang Chee and Ibrahim, Yakub and Md Rezaur, Rahman and Sinin, Hamdan and Ahmad Kueh, Beng Hong (2023) Impact of Montmorillonite Clay on Polysulfone Mixed Matrix Membrane for Heavy Metal Adsorption. Water Air & Soil Pollution, 234 (275). pp. 1-16. ISSN 1573-2932

Khaled M., Amtered El-Abidi and George, Ofori and Sharifah Akmam, Syed Zakaria and Mohammad Abdul, Mannan and Noor Faisal, Abas (2019) Identifying and Evaluating Critical Success Factors for Industrialized Building Systems Implementation: Malaysia Study. Arabian Journal for Science and Engineering, 44. pp. 8761-8777. ISSN 2191-4281

Khan, Adil H. and Al-Asad, Jawad F. and Latif, Ghazanfar (2018) Speckle suppression in medical ultrasound images through Schur decomposition. IET Image Processing, 12 (3). pp. 307-313. ISSN 17519659

Kinidi, Lennevey and Shanti Faridah, Salleh and Noraziah, Abdul Wahab and Khairul Fikri, Tamrin and Hipolito, Cirilo Nolasco and Ivy Tan, Ai Wei (2019) Corrigendum to “Recent Development in Ammonia Stripping Process for Industrial Wastewater Treatment”. INTERNATIONAL JOURNAL OF CHEMICAL ENGINEERING. p. 1. ISSN 1687-806X

Kok, Chin Chai and Chian, Haur Jong and Kai, Meng Tay and Chee, Peng Lim (2016) A perceptual computing-based method to prioritize failure modes in failure mode and effect analysis and its application to edible bird nest farming. Applied Soft Computing Journal, 49. pp. 734-747. ISSN 15684946

Kolay, P.K and Sii, H.Y and Taib, S.N.L. (2012) Compressibility characteristics of tropical peat using Rowe cell consolidation. World Journal of Engineering, 9 (4). pp. 277-284.

Koon, Beng Ooi and Zou, Patrick X.W. and Mohammad Omar, Abdullah (2015) A Simulation Study of Passively Heated Residential Buildings. Procedia Engineering, 121. pp. 749-756. ISSN 1877-7058

Kueh, A.B.H. and Kho, V.T. (2019) Strut waviness and load orientation affected fracture toughness knockdown in biaxially woven square lattices. International Journal of Mechanical Sciences, 164. ISSN 0020-7403

Kueh, A.B.H. and Siaw, Y.Y. (2021) Impact resistance of bio-inspired sandwich beam with side-arched and honeycomb dual-core. Composite Structures, 275 (2021). ISSN 0263-8223

Kueh, Ahmad Beng Hong (2021) Artificial neural network and regressed beam-column connection explicit mathematical moment-rotation expressions. Journal of Building Engineering, 43 (103195).

Kuok, Kelvin K.K and Mah, D.Y.S. and Imteaz, M.A and Kueh, S.M (2016) Comparison of future intensity duration frequency curve by considering the impact of climate change: case study for Kuching city. International Journal of River Basin Management, 14 (1). pp. 47-55. ISSN 1571-5124

Kuok, King Kuok and Muhammad Khusairy, Bakri and Chiu, Po Chan and Md. Rezaur, Rahman and Murtala, Namakka and Khairul Anwar, Mohamad Said and Chin, Mei Yun and Mohammed Muzibur, Rahman (2024) Merits of bamboo utilization in earth preservation, water, and wastewater treatment : A mini review. BioResources, 19 (2). pp. 1-24. ISSN 1930-2126

Kwang, Q.W and Ting, S.N (2009) Adequacy of quality provision in standard forms of local and international construction contracts. UNIMAS E-Journal of civil Engineering, 1 (1).

Lai, Josephine Chang Hui and Fatin Fakhira, Azman and Rubiyah, Baini (2020) Physico-mechanical and morphological properties of rice husk-coconut husk fiber reinforced epoxy composites. Malaysian Journal of Fundamental and Applied Sciences, 16 (4). pp. 437-443. ISSN 2289-599X

Lai, Sai Hin and Chin, Ren Jie and Eugene Soo, Zhen Xiang and Lloyd, Ling and Hamed Benisi, Ghadim (2024) Optimal Design of Subsurface Conveyance System Based Bio-Ecological Drainage System Simulation. KSCE Journal of Civil Engineering, 28. pp. 2564-2570. ISSN 1976-3808

Lau, P. C. and Teo, DCL and Mohammad, Abdul Mannan (2018) Mechanical, durability and microstructure properties of lightweight concrete using aggregate made from lime-treated sewage sludge and palm oil fuel ash. Construction and Building Materials, 176. pp. 24-34. ISSN 0950-0618

Law, I.N. (2011) Impacts of barrage flushing and flooding-in operations on saline intrusion upstream. UNIMAS E-Journal of Civil Engineering, 2 (1).

Law, P.L and Ng, Chee Khoon and Ha, How Ung and Lau, Hieng Ho (2005) Analysis and Design of Jobs for Control of Cumulative Trauma Disorders: Plastic Forks/Spoons Packing Job. The Institution of Engineers, Malaysia, 66 (3). ISSN 0126-513X

Lawan, S.M and Abidin, W.A.W.Z and Chai, W.Y and Baharun, A. and Masri, T. (2013) The Status Of Wind Resource Assessment(Wra) Techniques, Wind Energy Potential and Utilisation In Malaysia and Other Countries. ARPN Journal of Engineering and Applied Sciences, 8 (12).

Lawan, S.M and Abidin, W.A.W.Z. and Lawan, A.M. and Mustapha, M. and Bichi, S.L. (2015) ANN and GIS-assisted methodology for wind resource assessment (WRA) in Sarawak. Jurnal Teknologi, 77 (12). pp. 75-80. ISSN 1279696

Lawrence Insol, Alik and Edi Suhaimi, Bakar and Zaidon, Ashaari and Putri NurKhairunnisha, Ismail and Ronald Lian, Nuh and Gaddafi, Ismaili (2016) Bend curve characteristics of phenol formaldehyde resin treated oil palm wood (Elaeisguineensis Jacq.). Journal of Scientific Research and Development (JSRD), 2 (3). pp. 21-27. ISSN 1115-7569

Lee, Thin Tay and Yee, Yong Lee and Yeong, Huei Lee and Kueh, Ahmad Beng Hong (2021) Compressive and Flexural Strengths of Mortar with Silica Aerogel Powder. ICCOEE2020, LNCE, 132. pp. 493-500.

Lee, Y H and Thien, L S and Lee, Y Y and Wong, S Y and Tan, C S and Chai, C S (2020) Transformation from 2D structural drawing to building information model: Perspectives from a small-scaled company. IOP Conference Series: Materials Science and Engineering, 943. pp. 1-9.

Lee, Yee Yong and Mohd Fadhil, Md Din and Zainura Zainon, Bin Noor and Kenzo, Iwao and Shazwin, Mat Taib and Singh, Lakhveer and Nur Hafizah, Abd Khalid and Nickholas, Anak Anting and Eeydzah, Aminudine (2018) Surrogate human sensor for human skin surface temperature measurement in evaluating the impacts of thermal behaviour at outdoor environment. Measurement, 118. pp. 61-72. ISSN 0263-2241

Lee, Yeong Huei and Mugahed, Amran and Lee, Yee Yong and Kueh, Ahmad Beng Hong and Kiew, Siaw Fui and Roman, Fediuk and Nikolai, Vatin and Yuriy, Vasilev (2021) Thermal Behavior and Energy Efficiency of Modified Concretes in the Tropical Climate: A Systemic Review. Sustainability, 13 (21). pp. 1-24. ISSN 2071-1050

Lee Thin, Tay and Yee Yong, Lee and Yeong Huei, Lee and Ahmad Kueh, Beng Hong (2022) A REVIEW ON THE BEHAVIOUR, PROPERTIES AND FAVOURABLE CHARACTERISTICS FOR THERMALLY INSULATED CONCRETE FOR TROPICAL CLIMATE. Journal of Engineering Science and Technology, 17 (3). pp. 1608-1643. ISSN 1823-4690

Lie, Meng Pang and Kai, Meng Tay and Chee, Peng Lim (2014) A New Monotonicity Index for Fuzzy Rule-based Systems. 2014 IEEE International Conference on Fuzzy Systems (FUZZ-IEEE).

Lim, Huei Yeong and Suzana, Yusup and Acda, Menandro N. and Lai, Bridgid Fui Chin and Elisabeth, Rianawati and Pornkamol, Unrean and Yiin, Chung Loong and Quitain, Armando T. and Suttichai, Assabumrungrat (2023) Investigation of Calcium Oxide–Impregnated Zeolite Catalyst Toward Catalytic Pyrolysis of Oil Palm Empty Fruit Bunch: Bio-oil Yields, Characterizations, and Kinetic Study. BioEnergy Research. pp. 1-15.

Lim, Hung Ling and Mohammad Abdul, Mannan and Rana Shamseldeen, Fakhri and Eethar Thanon, Dawood and Delsye Teo, Ching Lee and Sadia, Tasnim (2024) Characteristics of self‑compacting green concrete. Discover Civil Engineering, 1 (91). pp. 1-14. ISSN 2948-1546

Lim, L.L.P and Lynch, R.J (2011) Feasibility study of a photocatalytic reactor for in-situ groundwater remediation of organic compounds. Journal of Hazardous Materials, 194.

Lim, Min Khiong and Md., Safiuddin and Mohammad, Abdul Mannan and Resdiansyah, - (2021) Material Properties and Environmental Benefits of Hot-Mix Asphalt Mixes Including Local Crumb Rubber Obtained from Scrap Tires. Environments, 8 (47). pp. 1-24.

Ling, H. and Teo, Delsye Ching Lee (2011) Lightweight Concrete Bricks Produced from Industrial and Agricultural Solid Waste. 2011 World Congress on Sustainable Technologies (WCST). pp. 148-152.

Ling, I.H and Teo, Delsye Ching Lee (2011) Reuse of Waste Rice Husk Ash and Expanded Polystyrene Beads as an Alternative Raw Material in Lightweight Concrete Bricks. International Journal of Chemical and Environmental Engineering, 2 (5). 328-332.. ISSN 2078-0737

Ling, J. A. and Then, Yi Lung and Yeow, You Kok and Ahmed, Jubaer and Zaidel, D. N.A. (2018) Tea leaves moisture prediction using one-port monopole sensor. Asia-Pacific Microwave Conference Proceedings, APMC. pp. 654-657. ISSN 978-153860640-7

Loh, Wing Son and Lloyd, Ling and Chin, Ren Jie and Lai, Sai Hin and Loo, Kar Kuan and Seah, Choon Sen (2024) A comparative analysis of missing data imputation techniques on sedimentation data. Ain Shams Engineering Journal, 15 (6). pp. 1-20. ISSN 2090-4495

Low, Wen Pei and Tay, Lee Thin and Lee, Yee Yong and Lee, Yeong Huei and Ting, Sim Nee (2023) ASSESSMENT OF RED AND WHITE CLAY EVAPORATIVE RATE IN SIMULATING PERSPIRATION WITH TEXTILE. Journal of Engineering Science and Technology (JESTEC), 18 (6). pp. 1-12. ISSN 1823-4690

Loy, Adrian Chun Minh and Hatem, Alhazmi and Lock, Serene Sow Mun and Chung Loong, Yiin and Cheah, Kin Wai and Chin, Bridgid Lai Fui and How, Bing Shen and Suzana, Yusup (2021) Life-cycle assessment of hydrogen production via catalytic gasification of wheat straw in the presence of straw derived biochar catalyst. Bioresource Technology, 341 (2021). pp. 1-9. ISSN 0960-8524

M M, Hassan and Kasumawati, Lias and Norlida, Buniyamin and B S S, Naimullah and Ahmad Tirmizi, Jobli (2021) SAR Performance of Rectangular Microstrip Antenna for Breast Cancer Hyperthermia Treatment with Different Period of Treatment Procedure. Journal of Physics: Conference Series, 2071 (1).

M. R. M., Sharip and D. K. A., Sakawi and D. N., Zaidel and P. R. P., Hoole and M. H. I., Saad and A. S., Abdullah and A. H. A., Karim and H. H. A., Halim and A. K., Rahman (2020) Distribution Voltage in DC Micro-grid System based Solar PV Topologies Configuration in Sarawak, Malaysia. International Journal of Integrated Engineering (IJIE), 12 (6). pp. 80-86. ISSN 2600-7916

M. Shahidul, Islam and Syed Tarmizi, Syed Shazali and Sarip, A.S.H. (2017) ENERGY EXTRACTION EFFICIENCY OF IN-STREAM MULTISTAGE MICRO-HYDRO TURBINE. Sci. Int. (Lahore), 29 (5). pp. 1129-1134. ISSN 1013-5316

M.D, Yusoff and N.I, Monieur and G.D, Airey (2010) The 2S2P1D - An Excellent Linear Viscoelastic Model. UNIMAS e-Journal of Civil Engineering, 1 (2).

M.S.Z.M, Suffian and A.N.H.A, zaini and Annisa, Jamali and Shahrol, Mohamaddan and Muhd Fadzli, Ashari (2021) Reliable Smart Pet Feeding Machine Using Arduino Uno Starter Kit. IOP Conference Series: Materials Science and Engineering, 1101 (012033). pp. 1-7.

Madhat Farouk, Abu-alnaeem and Ismail, Yusoff and Tham, Fatt Ng and Yatimah, Alias and May, Raksmey (2018) Assessment of groundwater salinity and quality in Gaza coastal aquifer, Gaza Strip, Palestine: An integrated statistical, geostatistical and hydrogeochemical approaches study. Science of The Total Environment, 615. pp. 972-989. ISSN 0048-9697

Mah, D.Y.S. (2016) Improving drowned drainage outlets with submerged orifices. Water Practice & Technology, 11 (4). pp. 849-856. ISSN 1751-231X

Mah, D.Y.S. (2016) River safe yield with the constraint of a contracted rectangular weir for surface water supply. Water Practice & Technology, 11 (4). pp. 712-720. ISSN 1751-231X

Mah, D.Y.S. and Bustami, R. and Putuhena, F.J. and Dianty, M.A. (2020) Testing the Concept of Mitigating Overflowing Urban Drain with Permeable Road. International Journal of Advanced Trends in Computer Science and Engineering, 9 (5). pp. 7878-7882. ISSN 2278-3091

Mah, D.Y.S. and Ching, Vern Liow and Md Abdul, Mannan (2019) Application of StormPav Green Pavement System in a Government Buildings Redevelopment Scheme. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (9). pp. 723-727. ISSN 2278-3075

Mah, D.Y.S. and Malek, M.A. and Putuhena, Frederik Josep (2019) Digitizing Hydrological Patterns For River Traffic Safety. International Journal of Civil Engineering & Technology, 10 (6). pp. 263-271. ISSN 0976-6316 (Online)

Mah, D.Y.S. and Ngu, J.O.K. and Bustami, R.A. and Putuhena, F.J. (2021) Case Study of Modular Pre-cast Concrete On-Site Stormwater Detention Susyem during Monsoon Season in Southeast Asia. Applied Environmental Research, 43 (1). pp. 28-40. ISSN 2287-075X

Mah, D.Y.S. and Ngu, J.O.K. and Caroline, P.D. and Malek, M.A. (2020) Catchment Size to Effective Tank Volume Relationships for Individual Lot Stormwater Detention System in Malaysian Detached House. International Journal of Advanced Trends in Computer Science and Engineering, 9 (5). pp. 8358-8363. ISSN 2278-3091

Mah, D.Y.S. and Ngu, J.O.K. and Caroline, P.D. and Malek, M.A. (2020) Catchment Size to Effective Tank Volume Relationships for Individual Lot Stormwater Detention System in Malaysian Detached House. International Journal of Advanced Trends in Computer Science and Engineering, 9 (5). pp. 8358-8363. ISSN 2278-3091

Mah, D.Y.S. and Ong, Johnny King Ngu and Liew, Vernon and Wan Hashim, Wan Ibrahim (2018) Augmenting Drainage System in the Old Town of Kuching, Sarawak, Malaysia. International Journal of Engineering and Technology, 7 (3.18). pp. 36-39. ISSN 2227-524X

Mah, D.Y.S. and Putuhena, F.J. (2014) Modelling of Dam-Weir Operations for Environmental Quality. UNIMAS e-Journal of Civil Engineering, 5 (1).

Mah, D.Y.S. and Siew, Ling Loh and Md Abdul, Mannan and Wan Hashim, Wan Ibrahim (2018) Modelling of Surface Permeation in Multiple-Orifice Permeable Road. International Journal of Engineering and Technology, 7 (3.18). pp. 40-43. ISSN 2227-524X

Mah, D.Y.S. and Tze, Chiat Ng and Putuhena, Frederik Josep (2018) Integrating Infiltration Facility to Urban Road Drainage. International Journal of Engineering and Technology, 7 (3.18). pp. 31-35. ISSN 2227-524X

Mah, Darrien Yau Seng and Bong, Charles Hin Joo and Ong, Johnny King Ngu (2016) Flow characteristics of individual lot stormwater detention. Water Practice & Technology, 11 (4). pp. 721-727. ISSN 1751-231X

Mah, Darrien Yau Seng and Ngu, Johnny Ong King and Siti Noor Linda, Binti Taib and Mohammad, Abdul Mannan (2020) Modelling of Compartmentalized Household Storm Water Detention System Using SWMM5. International Journal of Emerging Trends in Engineering Research (IJETER), 8 (2). pp. 344-349. ISSN 2347-3983

Mah, Darrien Yau Seng and Putuhena, Frederik Josep (2020) Digitizing Flood Processes for Sarawak River Operations. Malaysian Construction Research Journal, 31 (2). pp. 51-61. ISSN 2590-4140

Mah, Yau Seng (2011) Modelling of sea level rise and river system. Disaster Prevention and Management, 20 (2). pp. 108-114. ISSN 0965-3562

Mah, Yau Seng (2011) Restoring nature in engineering structure : a modelling of Kuching bypass floodway. Journal Coastal Conservation, 15 (4). pp. 565-571. ISSN 1874-7841

Mah, Yau Seng and Kuok, Kelvin K.K and Teo, F.Y. (2016) Case study of exploited riparian corridors: rapid assessment of ecological health for riparian buffer width. International Journal of River Basin Management, 14 (1). pp. 57-64. ISSN 1571-5124

Mah, Yau Seng and Lai, S.H. and Chan, R.A.@R.B. and Putuhena, F.J. (2012) Investigative modelling of the flood bypass channel in Kuching, Sarawak, by assessing its impact on the inundations of Kuching-Batu Kawa-Bau Expressway. Structure and Infrastructure Engineering, 8 (7). pp. 705-714.

Mah, Yau Seng and Merry Tang, Shi Ting and Rosmina, Ahmad Bustami and Wong, Yoke Seng and Nurhayati, Nurhayati and Frederik Josep, Putuhena (2024) Modelling for Climate Adaptation in Urban Drain Design with Orifice Flow Restrictor. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 123 (2). pp. 162-174. ISSN 2289 - 7879

Mah, Yau Seng and Merry Tang, Shi Ting and Teo, Fang Yenn (2023) Stormwater Detention Structures in the Veranda and Parking Lot at Commercial Centre Subjected to Historical Extreme Rainfall Events. Malaysian Construction Research Journal, 40 (2). pp. 39-53. ISSN 1985-3807

Mah, Yau Seng and Norazlina, Bateni and Frederik Josep, Putuhena (2023) Case Study of Stormwater Control by Permeable Road in Commercial Centre under Equatorial Climate. Turkish Journal of Civil Engineering, 34 (4). pp. 133-142. ISSN 2822-6836

Mah, Yau Seng and Putuhena, F.J. and Rosli, N.A (2011) Modelling of flood flushing in a tributary constrained by barrages. World Applied Sciences Journal, 23 (1). pp. 101-108. ISSN 1818-4952

Mah, Yau Seng and Wan Hashim, Wan Ibrahim and Lo, May Chiun and Ha, Shiaw-Tong (2019) Factors Affecting Satisfaction and Loyalty in Public Transport using Partial Least Squares Structural Equation Modeling (PLS-SEM). International Journal of Innovative Technology and Exploring Engineering, 8 (12). pp. 569-575. ISSN 2278-3075

Mahmood, Adnan and Hushairi, Zen and Al-Khalid, Othman (2013) A survey of vertical handover decision algorithms in fourth generation heterogeneous wireless networks. World Applied Sciences Journal, 28 (5). pp. 629-635. ISSN 1818-4952

Marelianda, Al Dianty and Frederik, J. Putuhena and Darrien, Y.S. Mah and Rosmina, Ahmad Bustami and Fachrian, Kanafani (2021) ECONSTRUCTION OF 1st JANUARY 2020 STORM IN AN URBAN HOUSING AREA OF TANGERANG SELATAN, INDONESIA. Geographia Technica, 16 (2). pp. 171-182. ISSN 2065-4421

Mariah, Awang and Ina Syazwani, Hamzah and M. A. A., Rahman and Mohd Kamaruzaman, Musa and M. M., Syafiq Syazwan and Fatimah, Yusuf and Nuramidah, Hamidon and Mohd Shahril, Abdul Rahman and Wilson Rangga, Anthony Jiram (2021) Access security system in University Tun Hussein Onn Malaysia (Pagoh Campus). AIP Conference Proceedings, 2347 (1). ISSN 1551-7616

Marina, Patrick and Mah, D.Y.S. and Putuhena, Frederik Josep and Yin, Chai Wang and Onni Suhaiza, Selaman (2019) Constructing depth-area-duration curves using public domain satellite-based precipitation data. International Journal of Hydrology Science and Technology, 9 (3). pp. 281-302. ISSN 2042-7808 (Print)

Marini, Sawawi and Cheryl, Rinnai and Siti Kudnie, Sahari and Sinin, Hamdan and Nur Tahirah, Razali and Nicholas, Kuan (2022) Conversion of Electrospun Polyarylonitrile (PAN) into Carbon Fibres. International Journal of Nanoelectronics and Materials, 15. pp. 277-283. ISSN 1985-5761

Marini, Sawawi and Cheryl Rinnai, Raja and Shirley, Jonathan Tanjung and Sinin, Hamdan and Siti Kudnie, Sahari and Rohana, Sapawi and Ervina, Junaidi and Mahshuri, Yusof and Noor Hisyam, Noor Mohamed (2023) Effects of UV Irradation on Electrospun PLLA and PAN in the Production of Short Electropun Fibres Using Ultrasonication Method. Pertanika Journal of Science & Technology, 31 (5). pp. 2441-2551. ISSN 0128-7680

Maryam Firas, Al-Baldawi and Farah Nora Aznieta, Abdul Aziz and Al Ghazali Noor, Abbas and Noor Azline, Mohd Nasir and Norsuzailina, Mohamed Sutan (2024) Performance of Hybrid Fiber Reinforced Geopolymer Composites : Scientometric and Conventional Review. PERTANIKA JOURNAL OF SCIENCE AND TECHNOLOGY, 32 (S5). pp. 41-73. ISSN 2231-8526

Maseri, H. and Selaman, O. S. and Mannan, M. A. and Taib, S.N.L. (2020) Relationship Performance of Cylindrical Detention Pond (CDP) as Depression Storage and Runoff Reduction Under Fully Saturated Condition. Journal of Computational and Theoretical Nanoscience, 17 (2-3). pp. 1539-1546.

Maseri, H. and Selaman, O.S and Mannan, Mohammad Abdul and Taib, S.N.L. (2018) Performance of cylindrical detention pond (CDP) as depression storage under fully saturated condition. International Journal of Engineering & Technology, 7 (4). pp. 5996-6000. ISSN 2227-524X

Matarul, J. and Mannan, M. A. and Mohammad Ibrahim Safawi, M. Z. and Ibrahim, A. and Jainudin, N.A. and Yusuh, N.A. (2016) Performance-based Durability Indicators of Different Concrete Grades Made by the Local Ready Mixed Company: Preliminary Results. Procedia - Social and Behavioral Sciences, 224. pp. 620-625. ISSN 1877-0428

Md Abdul, Maleque and Saffina, W. and Ahmad, A.S and Mohammad Yeakub, Ali (2017) Fe-C-Si ternary composite coating on CP-titanium and its tribological properties. IOP Conference Series: Materials Science and Engineering, 184 (1). ISSN 17578981

Md. Eaqub, Ali and Md.M., Rahman and Th. S., Dhahi and Muhammad, Kashif and Md. Shaheen, Sarkar and Wan Jeffrey, Basirun and Hamid, SBA and Bhargava, Suresh (2016) Nanostructured Materials: Bioengineering Platforms for Sensing Nucleic Acids. Reference Module in Materials Science and Materials Engineering. pp. 1-26. ISSN 978-0-12-803581-8 (ISBN)

Md. Habibur Rahman, Sobuz and Ayan, Saha and Abu Sayed, Mohammad Akid and Thomas, Vincent and Vivian W. Y., Tam and Caglar, Yalcınkaya and Rashid, Mujahid and Norsuzailina, Mohamed Sutan (2023) Performance of self-compacting concrete incorporating waste glass as coarse aggregate. Journal of Sustainable Cement-Based Materials, 12 (5). pp. 527-541. ISSN 2165-0381

Md. Habibur Rahman, Sobuz and Datta, Shuvo Dip and Abu Sayed Mohammad, Akid and Vivian W.Y., Tam and Shoaib, Islam and Md. Jewel, Rana and Farhad, Aslani and Yalçınkaya, Çağlar and Norsuzailina, Mohamed Sutan (2022) Evaluating the effects of recycled concrete aggregate size and concentration on properties of high-strength sustainable concrete. Journal of King Saud University - Engineering Sciences. pp. 1-12. ISSN 1018-3639

Md. Rezaur, Rahman and Md Mizanur, Rahman and Sinin, Hamdan and Md Faruk, Hossen and Chang, Josephine Hui Lai and Fui, Kiew Liew (2017) Effect of nanoclay and silica on mechanical and morphological properties of jute cellulose polyethylene biocomposites. Journal of Vinyl and Additive Technology, 23. E113-E118. ISSN 1083-5601

Md. Rezaur, Rahman and Nur-Azzah Afifah, Taib and Muhammad Khusairy, Bakri and Siti Noor Linda, Taib (2021) Importance of sustainable polymers for modern society and development. Advances in Sustainable Polymer Composites. pp. 1-35.

Md.Rezaur, Rahman and Muhammad, Adamu and Sinin, Hamdan and Muhammad Khusairy, Bakri and Fahmi Asyadi, Md. Yusof and Afrasyab, Khan (2021) Optimization and characterization of acrylonitrile/MAPE/ nano‑clay bamboo nanocomposites by response surface methodology. Polymer Bulletin. pp. 1-29.

Megan, Soh and Deni Shidqi, Khaerudini and Chung Loong, Yiin and Jiuan Jing, Chew and Jaka, Sunarso (2022) Physicochemical and structural characterisation of oil palm trunks (OPT) hydrochar made via wet torrefaction. Cleaner Engineering and Technology, 8 (100467). pp. 1-10. ISSN 2666-7908

Mehtab Ali, Darban and Serene Lock, Sow Mun and Suhaib Umer, Ilyas and Kang, Dun Yen and Mohd Hafiz Dzarfan, Othman and Yiin, Chung Loong and Sharjeel, Waqas and Zunara, Bashir (2024) Molecular simulation of [P8883][Tf2N] ionic liquid decorated silica in 6FDA-ODA based mixed matrix membrane for enhanced CO2/CH4 separation. RSC Advances, 14 (32). pp. 22894-22915. ISSN 2046-2069

Melvin X. J., Wee and Bridgid Lai Fui, Chin and Agus, Saptoro and Chung Loong, Yiin and Jiuan Jing, Chew and Jaka, Sunarso and Suzana, Yusup and Abhishek, Sharma (2023) A review on co-pyrolysis of agriculture biomass and disposable medical face mask waste for green fuel production: recent advances and thermo-kinetic models. Frontiers of Chemical Science and Engineering. pp. 1-21. ISSN 2095-0187

Mohamad Iskandar, Jobli and Yao, Runming and Luo, Zhiwen and Shahrestani, Mehdi and Li, Nan and Liu, Hong (2019) Numerical and experimental studies of a Capillary-Tube embedded PCM component for improving indoor thermal environment. Applied Thermal Engineering, 148. pp. 466-477. ISSN 1359-4311

Mohamad Raduan, Bin Kabit and Lee, Melissa May Syn and Norehan, Zulkiply and Zayn, Al-Abideen Gregory (2019) Modelling Driver Injury Severity at Signalized Intersections in Malaysia. Journal of Mechanics of Continua and Mathematical Sciences (4). pp. 288-299. ISSN 0973-8975

Mohamad Raduan, Kabit and Jeffery Lee Siong, TING and Abdullah, Yassin (2022) TOWARDS CAMPUS SUSTAINABILITY : ESTIMATING ON-CAMPUS VEHICLE CO2 EMISSIONS IN UNIMAS. Journal of Sustainability Science and Management, 17 (6). pp. 193-206. ISSN 2672-7226

Mohamad Raduan, Kabit and Norehan, Zulkiply and Aidil Azli, Alias and Wan Hashim, Wan Ibrahim and Resdiansyah, Mansyur and Ron Aldrino Chan, Ron Buking (2009) Assessing impact of instruction on spatial ability among Malaysian engineering students. International Journal of Learning, 16 (5). pp. 347-356. ISSN 1447-9494

Mohamad Raduan, Kabit and Syed Syabil Rahmat, Syed Sarkawi and MD Abdul Mannan, Mannan and Johnson Olufemi, Adebayo (2021) Effect of Silica Fume and Synthetic Fibre Towards the Compressive Strength of Modified Crumb Rubber Cement Mortar. Defect and Diffusion Forum, 411 (2021). pp. 135-143. ISSN 1662-9507

Mohamad Shazwan, Ahmad Shah and Norhazilan, Md. Noor and Beng, Ahmad Hong Kueh and Mohd. Nasir, Tamin (2020) Effects of water-cement ratio and notches to the flexural strength of concrete. IOP Conference Series: Materials Science and Engineering, 849. pp. 1-10.

Mohamed Sutan, Norsuzailina and N.I.A., Ideris and S.N. L., Taib and D.T.C., Lee and A., Hassan and S.K., Sahari and K.A., Mohamad Said and H. R., Sobuz (2017) Microstructural characterization of catalysis product of nano cement based materials. E3S Web of Conferences. ISSN https://www.e3s-conferences.org/ (In Press)

Mohammad, Abdul Mannan and Hidayati, Asrah and Abdul Karim, Mirasa (2015) The Performance of Ultrafine Palm Oil Fuel Ash in Suppressing the Alkali Silica Reaction in Mortar Bar. International Journal of Engineering and Applied Sciences (IJEAS), 2 (9). pp. 60-66. ISSN 2394-3661

Mohammad, Abdul Mannan and Shyue, Leong Lee and Wan Hashim, Wan Ibrahim (2019) Shear strength evaluation of composite pavement with geotextile as reinforcement at the interface. Geotextiles and Geomembranes. pp. 1-6. ISSN 0266-1144

Mohammad, Abdul Mannan and Teo, Delsye Ching Lee and Kurian, V. J. (2010) Durability of lightweight OPS concrete under different curing conditions. Materials and Structures, 43 (1). pp. 1-13. ISSN 1871-6873

Mohammad, Abdul Mannan and Teo, Delsye Ching Lee and Kurian, V. J. (2006) Flexural Behaviour of Reinforced Lightweight Concrete Beams Made with Oil Palm Shell (OPS). Journal of Advanced Concrete Technology, 4 (3). pp. 1-10. ISSN 1347-3913

Mohammad, Abdul Mannan and Teo, Delsye Ching Lee and Kurian, V. J. (2006) Influence of Site Curing on Bond Properties of Reinforced Lightweight Concrete. Journal of Civil Engineering Research and Practice, 3 (1). pp. 9-19. ISSN 1729-5769

Mohammad, Abdul Mannan and Teo, Delsye Ching Lee and Kurian, V. J. (2006) Structural Concrete Using Oil Palm Shell (OPS) as Lightweight Aggregate. Turkish Journal of Engineering and Environmental Sciences, 30 (4). pp. 251-257. ISSN 1303-6157

Mohammad, Abdul Mannan and Wong, L. L. and Asrah, H. and Muhammad Ekhlasur, Rahman (2013) Effects of Aggressive Ammonium Nitrate on Durability Properties of Concrete using Sandstone and Granite Aggregates. World Academy of Science, Engineering and Technology, 73. pp. 1107-1111. ISSN 1307-6892

Mohammad, Masita and Ibrahim, Yakub and Zahira, Yaakob and Nilofar, Asim and Kamaruzzaman, Sopian (2018) Adsorption Isotherm of Chromium (VI) into Zncl2 Impregnated Activated Carbon Derived by Jatropha Curcas Seed Hull. IOP Conference Series: Materials Science and Engineering, 293 (1). pp. 1-6. ISSN 17578981

Mohammad Kamrul, Hasan and Musse Mohamud, Ahmed and Aisha, Hassan Abdalla Hashim and Abdur Razzaque, Shayla Islam and Biswajeet, Pandey (2020) A Novel Artificial Intelligence Based Timing Synchronization Scheme for Smart Grid Applications. Wireless Personal Communications. ISSN 1572-834X

Mohammad Omar, Abdullah and Lim, Soh Fong and S.F., Salleh and T. M., Tai and S. L., Leo and A. K., Umar (2011) Development of a small-scale reactor system for bioethanol production from agriculture waste geared towards small industries applications in Malaysia. Renewable Energy & Power Quality Journal, 1 (9). pp. 37-40. ISSN 2172-038X

Mohammad Omar, Abdullah and Tan, Ivy Ai Wei and Lim, Leo Sing (2011) Automobile adsorption air-conditioning system using oil palm biomass-based activated carbon: A review. Renewable and Sustainable Energy Reviews, 15. pp. 2061-2072. ISSN 1364-0321

Mohammad Syuhaimi, Ab Rahman and Fazlinda, Ab Aziz and Noor Azie Azura, Mohd Arif and Abang Annuar, Ehsan and Kasmiran, Jumari (2009) Kesan Halaju Putaran Gilapan Terhadap Peratus Potongan Hujung Sisi Pandu Gelombang Polimer SU-8 di atas Substrat Silikon. Jurnal Kejuruteraan., 21. pp. 107-116.

Mohammad Syuhaimi, Ab-Rahman and Fazlinda, Ab-Aziz and Noor Azie Azura, Mohd Arif and Saiful Dzulkefly, Zan and Seri Mastura, Mustaza and Abang Annuar, Ehsan and Sahbudin, Shaari (2009) The study of the good polishing method for polymer SU-8 waveguide. Optica Applicata, 39 (3). pp. 459-465.

Mohammad Syuhaimi, Ab-Rahman and Noor Azie Azura, Mohd Arif and Sahbudin, Shaari (2011) Effect of Thermal Treatment on the Morphology of ZnS: Mn Nanocrystal. World Applied Sciences Journal, 12 (9). pp. 1505-1511. ISSN 1818-4952

Mohammad Zawawi, Rosman and Nurasiah Mira, Anuar and Nurul Syakeera, Nordin and Siti Farhanah, SM Johan and Chan, Chee Ming (2018) Beneficial reuse of dredged marine soils (DMS) with the inclusion of cement and granular material for engineering applications. Global Journal of Earth Science and Engineering, 5 (1). pp. 26-33. ISSN 2409-5710

Mohammad Zawawi, Rosman and Siti Farhanah, SM Johan and Norsharina, Abdul Rahman and Chee Ming, Chan (2016) Influence of Water Content on the Flow Consistency of Dredged Marine Soils. MATEC Web of Conferences, 78. 01094. ISSN 2261-236X

Mohammed Enamul, Hoque and Kuryati, Kipli and Tengku Mohd Afendi, Zulcaffle and Abdulrazak Yahya, Saleh and Dayang Azra, Awang Mat and Rohana, Sapawi and Annie, Joseph (2021) A Deep Learning Approach for Retinal Image Feature Extraction. Pertanika Journal of Science and Technology (2021). pp. 1-22. ISSN 0128-7680

Mohd Al, Mussa Ugak and Abu Zahrim, Yaser and Junidah, Lamaming and Ernest Kelly, Subin and Mariani, Rajin and Sariah, Saalah and Farrah Wong, Hock Tze and Sariah, Abang (2022) Comparative study on passive aerated in-vessel composting of food wastes with the addition of Sabah ragi. Carbon Resources Conversion, 5 (3). pp. 200-210. ISSN 2588-9133

Mohd Al, Mussa Ugak and · Nurul Elyani, Mohamad and Mariani, Rajin and Junidah, Lamaming and Sariah, Saalah and Abu Zahrim, Yaser (2023) Passive aerated in-vessel composting of food waste with the addition of Sabah ragi for campus sustainability: mass balance, dwarf crape jasmine growth and techno-economic study. Journal of Material Cycles and Waste Management, 25 (2). pp. 899-909. ISSN 1438-4957

Mohd Azrin, Mohd Said and Kong, Jing Hui and Nor Kamaliana, Khamis (2022) STUDY OF POSTURAL SAFETY AND MUSCLE ACTIVITY ANALYSIS FOR DEADLIFT EXERCISE IN GYM. Science International (Lahore), 34 (1). pp. 1-5. ISSN 1013-5316

Mohd Azrin, Mohd Said and Zinnirah, Wellun and Nor Kamaliana, Khamis (2022) Effects of Noise Hazards towards Physiology Especially Heart Rate Performance among Worker in Manufacturing Industry and Their Prevention Strategies: A Systematic Review. Iranian Journal of Public Health, 51 (8). pp. 1706-1717. ISSN 2251-6085

Mohd Danial, Ibrahim and Namba, Tadashi and Ochiai, Masayuki and Hashimoto, Hiromu (2010) Optimum Design of Thrust Air Bearing for Hard Disk Drive Spindle Motor. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 4 (1). pp. 70-81. ISSN 1884-8354

Mohd Nasrun, Mohd Nawi and Faizal, Baharum and Siti Halipah, Ibrahim and Riazi Mehdi, Riazi (2017) A review study of maintenance and management issues in Malaysian commercial building towards sustainable future practice. AIP Conference Proceedings, 1891 (1). ISSN 0094-243X

Mohd Nurfirdaus, Mohiddin and Abu, Saleh Ahmed and Reddy, Amarnadh N.R. and Sinin, Hamdan (2020) Turritella terebra Shell Synthesized Calcium Oxide Catalyst for Biodiesel Production from Chicken Fat. Materials Science Forum, 997. pp. 93-101. ISSN 1662-9752

Mohd Shaiful, Sajab and Wan Nazihah Liyana, Wan Jusoh and Denesh, Mohan and Hatika, Kaco and Rubiyah, Baini (2023) 3D Printed Functionalized Nanocellulose as an Adsorbent in Batch and Fixed-Bed Systems. Polymers, 15 (969). pp. 1-12.

Mu, KS and Kueh, ABH and Shek, PN and Mohd Haniffah, MR and Tan, BC (2021) Flow responses alteration by geometrical effects of tubercles on plates under the maximal angle of attack. Journal of Mechanical Engineering Science, 235 (19). pp. 3975-3987.

Mugahed, Amran and Fediuk, Roman and Abdelgader, Hakim S. and Murali, G. and Ozbakkaloglu, Togay and Huei Lee, Y. and Lee, Yee Yong (2022) Fiber-reinforced alkali-activated concrete : A review. Journal of Building Engineering, 45. pp. 1-34. ISSN 2352-7102

Mugahed, Amran and Natt, Makul and Roman, Fediuk and Yeong Huei, Lee and Nikolai, Vatin and Yee Yong, Lee and kachalla, Mohammed (2022) Global carbon recoverability experiences from the cement industry. Case Studies in Construction Materials, 17. pp. 1-22. ISSN 2214-5095

Muhammad, Adamu and Md. Rezaur, Rahman and Sinin, Hamdan and Muhammad Khusairy, Bakri and Fahmi Asyadi, Md Yusof (2020) Impact of polyvinyl alcohol/acrylonitrile on bamboo nanocomposite and optimization of mechanical performance by response surface methodology. Construction and Building Materials, 258. ISSN 0950-0618

Muhammad Khusairy, Bakri and Jayamani, E. and Sinin, Hamdan and Md. Rezaur, Rahman and Kakar, A. (2019) Potential of Borneo Acacia wood in fully biodegradable bio-composites' commercial production and application. POLYMER BULLETIN, 76 (2). p. 1059. ISSN 0170-0839

Muhammad Khusairy, Bakri and Md. Rezaur, Rahman and Siti Noor Linda, Taib and Law, Perry Nyuk Khui and Akshay, Kakar and Elammaran, Jayamani (2021) Nano-reinforcement in sustainable polymer composites. Advances in Sustainable Polymer Composites. pp. 231-243.

Muhammad Nor, Hafidzi and Ahmad Kueh, Beng Hong and Norhidayah, Rasin and Airil Yasreen, Mohd Yassin and Hisham, Mohamad (2011) Size Dependent Uniaxially Loaded Stability of Triaxial Weave Fabric Composites. Applied Mechanics and Materials, 94-96. pp. 1742-1745. ISSN 1662-7482

Muhd Fauzy, Sulaiman and Faisal, Amsyar and Ma, Chau Khun and Abdullah Zawawi, Awang and Wahid, Omar (2017) Bond Between SSTT Confined Concrete and Ribbed Steel Reinforcement Bar. Transactions on Science and Technology, 4 (3). pp. 194-201. ISSN 2289-8786

Mulyani, Rini and Raudhah, Ahmadi and Pilakoutas, Kypros and Hajirasouliha, Iman and Taufik, , (2015) A multi-hazard risk assessment of buildings in Padang city. Procedia Engineering, 125. pp. 1094-1100. ISSN 18777058

Musse, Mohamud Ahmed and Md Ohirul, Qays and Ahmed, Abu-Siada and Muyeen, S. M. and Md Liton, Hossain (2021) Cost-Effective Design of IoT-Based Smart Household Distribution System. MDPI, 5 (3). pp. 1-18. ISSN 1996-2021

Mustafa Kamal, M. and Baini, R. and Lim, S. F. and Rahman, M. R and Mohamaddan, S. and Hussain, H. (2019) Drying effect on the properties of traditionally processed sago starch. International Food Research Journal, 26 (6). pp. 1861-1869.

N. Mohamed, Sutan and I., Yakub and M. S., Jaafar and K. A., Matori and S. K., Sahari (2015) Sustainable Nanopozzolan Modified Cement: Characterizations and Morphology of Calcium Silicate Hydrate during Hydration. Journal of Nanomaterials, 2015.

N. N., Mohd Daud and Mohamed Nasrun, Osman and Muhammad Ramlee, Kamarudin and Abdul Rahman, Kram and Muhammad Mokhzaini, Azizan (2017) A Compact Antenna Design for Fifth Generation Wireless Communication System. MATEC Web of Conferences, 140 (01009). pp. 1-4. ISSN 2261-236X

N.M, Sa’don and M.J., Pender and A.R., Abdul Karim and R.P, Orense (2014) Pile Head Cyclic Lateral Loading of Single Pile. Geotech Geol Eng, 32. pp. 1053-1064.

Nabilah, Abdul Jaffar and Norlida, Buniyamin and Kasumawati, Lias (2019) An overview of available metamaterial-based antenna for non-invasive hyperthermia cancer treatment. Indonesian Journal of Electrical Engineering and Computer Science, 14 (2). pp. 697-705. ISSN 25024752

Nadia, Zaini and Afzan, Ahmad Zaini and Sitti Diana, Tamjehi and Abdul Wafi, Razali and Gui, Hun Chuen (2020) Implementation of Building Information Modeling (BIM) in SarawakConstruction Industry: A Review. IOP Conference Series: Earth and Environmental Science, 498. pp. 1-9.

Nagaratnam, Brabha H and Muhammad, Abdul Mannan and Muhammad Ekhlasur, Rahman and Abdul Karim, Mirasa and Alan, Richardson and Nabinejad, Omid (2019) Strength and microstructural characteristics of palm oil fuel ash and fly ash as binary and ternary blends in Self-Compacting concrete. Construction and Building Materials, 202. pp. 103-120. ISSN 0950-0618

Namazi, Eshagh and Hisham, Bin Mohamad and Ahmad Kueh, Beng Hong and Mohsen, Hajihassani and Siti Norafida, Binti Jusoh and Khaili Abad, Seyed Vahid Alavi Nezhad (2012) Ground Behaviour Around a Tunnel Using Various Soil Models. Electronic Journal of Geotechnical Engineering, 17. pp. 609-622. ISSN 1089-3032

Nasser, R.Afshar and Efarina, A.Hamit (2015) RAINWATER HARVESTING IN KOTA SAMARAHAN. International Journal of Research in Engineering and Technology, 4 (2). ISSN 2321-7308

Nawi, M.N.M and Shaharanee, I.N.M and Hashim, K.F. and Azman, M.N.A. and Ibrahim, S.H. (2015) Qualitative analysis on the barriers of industrialised building system (IBS) uptake in Malaysian construction projects. Advanced Science Letters, 21 (6). pp. 2134-2138. ISSN 1936-6612

Nawi, M.N.M and Songappenm, M. and Nadarajan, Shanthi and Siti Halipah, Ibrahim and Mustapha, R. (2017) Procurement performance and supplier management measurement issues: A case of Malaysian private company. International Journal of Supply Chain Management, 6 (1). pp. 246-253. ISSN 2051-3771

Ng, Ai Ping and Chiew, Kang Leng and Dayang Hanani, Binti Abang Ibrahim and Tiong, Wei King and Sze, San Nah and Nadianatra, binti Musa (2018) Android malware detection technique via feature analysis. Journal of Engineering Science and Technology, July. pp. 78-90. ISSN 1823-4690

Ng, Chee Khoon (2024) Editorial Notes: Application of Computational/Artificial Intelligence in Concrete Structures and Materials. Journal of Civil Engineering, Science and Technology, 15 (1). pp. 1-6. ISSN 2462-1382

Ng, Chee Khoon and Chai, Peng How and Ting, Sim Nee and Nicholas Kuan, Hoo Tien (2024) The Effect of Compressive Stress on Ultrasonic Pulse Velocity in Concrete for Compressive Strength Prediction. INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 16 (4). pp. 222-230. ISSN 2600-7916

Ng, Chee Khoon and Johnson Ting, Kwong Sen and Nichole Louise, Jack and Leonard Lim, Lik Pueh and Ting, Sim Nee (2024) The Properties of Normal Concrete with Ground Manganese Slag as Binder Replacement. Journal of Advanced Research in Applied Mechanics, 116 (1). pp. 62-74. ISSN 2289-7895

Ng, Cheehiong and Mannan, Mohammad Abdul and Kameswara Rao, N. S V (2016) Structural performance of precast floor panel using oil palm shell solid waste. Journal of Infrastructure Systems, 22 (4). ISSN 10760342

Ng, Cia Yik and Wan Zurina, Wan Jaafar and Faridah, Othman and Lai, Sai Hin and Yiwen, Mei and Liew, Juneng (2024) Assessment of Evaporative Demand Drought Index for Drought Analysis in Peninsular Malaysia. Science of the Total Environment, 917. pp. 1-17. ISSN 0048-9697

Ngie, David Chua Sing and Shahrol, Mohamaddan and Shirley, Jonathan Tanjong and Abdullah, Yassin and Lim, Soh Fong (2018) Detection of Bond Pad Discolorations at Outgoing Wafer Inspections. IEEE Transactions on Semiconductor Manufacturing, 31 (1). pp. 144-148. ISSN 0894-6507

Ngu, J.O.K. and Mah, D.Y.S. and Taib, S.N.L. and Mannan, M.A. and Chai, S.L. (2020) Evaluating the Efficiency of Household Stormwater Detention System. ASEAN Engineering Journal, 10 (2). pp. 105-114. ISSN 2586-9159

Ngu, J.O.K. and Mah, D.Y.S. and Taib, S.N.L. and Mannan, Mohammad Abdul and Hoo, T.Y. (2021) Field Data Analysis of a Flooding Household Stormwater Detention System. Disaster Advances, 14 (5). pp. 51-57. ISSN 2278-4543

Ngu, J.O.K. and Mah, Darrien Yau Seng and Taib, S.N.L. and Mannan, M.A. (2022) Field Data Analysis of Home-Based Stormwater On-Site Detention System. Journal of Sustainability Science and Management, 17 (6). pp. 207-216. ISSN 2672-7226

Nickholas, Anting and Mohd. Fadhil, Md. Din and Kenzo, Iwao and Mohanadoss, Ponraj and Karlvin, Jungan and Lee, Yee Yong and Lim, Alvin John Meng Siang (2017) Experimental evaluation of thermal performance of cool pavement material using waste tiles in tropical climate. Energy and Buildings, 142. pp. 211-219. ISSN 0378-7788

Nikmatin, S. and Hermawan, B. and Irmansyah, I. and Indro, M.N and Kueh, Ahmad Beng Hong and Syafiuddin, A (2019) Evaluation of the Performance of Helmet Prototypes Fabricated from Acrylonitrile Butadiene Styrene Composites Filled with Natural Resource. MATERIALS, 12 (1). p. 34. ISSN 1996-1944

Noor, e Hira and Serene Sow Mun, Lock and Noor Fazliani, Shoparwe and Irene Sow Mei, Lock and Lam Ghai, Lim and Yiin, Chung Loong and Yi Herng, Chan and Muhammad, Hassam (2023) Review of Adsorption Studies for Contaminant Removal from Wastewater Using Molecular Simulation. Sustainability, 15 (2). pp. 1-33. ISSN 2071-1050

Noor Amira, Sarani and Aeslina, Abdul Kadir and Mohd Fadhil, Md Din and Azini Amiza, Hashim and Mohd Ikhmal Haqeem, Hassan and Nur Jannah, Abdul Hamid and Nurul Nabila, Hashar and Nur Fatin Nabila, Hissham and Siti Farhanah, SM Johan (2023) Physical-mechanical properties and thermogravimetric analysis of fired clay bricks incorporating palm kernel shell for alternative raw materials. Construction and Building Materials, 376. pp. 1-18. ISSN 1879-0526

Noor E., Hira and Serene Lock, Sow Mun and Ushtar, Arshad and Khadija, Asif and Farman, Ullah and Abid Salam, Farooqi and Yiin, Chung Loong and Bridgid Chin, Lai Fui and Zill e, Huma (2023) Screening of Metal Oxides and Hydroxides for Arsenic Removal from Water Using Molecular Dynamics Simulations. ACS Omega. pp. 1-15. ISSN 2470-1343

Noorafizah, Murshid and Abu Zahrim, Yaser and Mariani, Rajin and Sariah, Saalah and Junidah, Lamaming and Mariana, Taliban (2024) Feasibility study of pilot scale vegetable waste composting project for Kundasang community’s waste management program. International Journal of Recycling of Organic Waste in Agriculture (IJROWA), 13 (3). pp. 1-12. ISSN 2251-7715

Noorafizah, Murshid and Junidah, Lamaming and Sariah, Saalah and Mariani, Rajin and Abu Zahrim, Yaser (2024) A review of vegetable waste bio-processing techniques in rural areas. International Journal of Recycling Organic Waste in Agriculture (IJROWA), 13 (2). pp. 1-25. ISSN 2251-7715

Nor Azalina, Rosli and Ahmad Kueh, Beng Hong (2023) Editorial scope – waste management and recycling. Journal of Civil Engineering, Science and Technology, 14 (1). pp. 1-5. ISSN 2462-1382

Nor Azalina, Rosli and Hamidi, Abdul Aziz and Ahmad Kueh, Beng Hong and Lim, Leonard Lik Pueh and Mohd Hafiz, Zawawi (2023) Leaching Behaviour of Synthetic Leachate through a Sewage Sludge and Red Gypsum Composite as Intermediate Landfill Cover. Sustainability, 15 (4229). pp. 1-15.

Noraida, Razali and Norazzlina, M.Sa'don and Abdul Razak, Abdul Karim (2024) STABILIZING REINFORCED PEAT USING CALCIUM-BASED ADDITIVE (SH85). Journal of Engineering Science and Technology, 19 (1). pp. 186-206. ISSN 1823-4690

Noraida, Razali and Norazzlina, M.Sa'don and Abdul Razak, Abdul Karim (2022) STRENGTH ENHANCEMENT OF REINFORCED PEAT WITH RUBBER WASTE AND MELAMINE UREA FORMALDEHYDE (MUF) RESIN. Journal of Engineering Science and Technology, 17 (6). pp. 3872-3892. ISSN 1823-4690

Noraida, Razali and Norazzlina, M.Sa’don and Abdul Razak, Abdul Karim (2016) Strength and Durability Effect on Stabilized Subgrade Soil. Journal of Civil Engineering, Science and Technology (JCEST), 7 (1). pp. 9-19.

Norazlina, Bateni and Lai, S.H. and Frederik Josep, Putuhena and Mah, D.Y.S. and Md Abdul, Mannan and Chin, Ren Jie (2020) Hydrological impact assessment on permeable road pavement with subsurface precast micro-detention pond. Water and Environment Journal. pp. 1-10. ISSN 1747-6585

Norazlina, Bateni and Lai, S.H. and Mohammad, Abdul Mannan and Jethro, Henry Adam and Kuryati, Kipli and Rosmina, Ahmad Bustami (2020) Performance of Permeable Pavement with Subsurface Micro Detention Storage as Rainwater Harvesting Device. Lecture Notes in Civil Engineering (LNCE). (Submitted)

Norazlina, Bateni and Lai, S.H. and Rosmina, Ahmad Bustami and Mohammad, Abdul Mannan and Mah, Yau Seng (2021) A review on green pavement hydrological design and recommended permeable pavement with detention storage. IOP Conf. Series: Material Sciences and Engineering, 1101. pp. 1-14. ISSN 1757-899X

Norazlina, Bateni and Lukman, Mohd Najib and Khairisya, Roslan and Darrien Mah, Yau Seng and Inawati, Othman and Maseri, H. and Mohammad Abdul, Mannan (2023) Environmental Performance of the StormPav Permeable Pavement using the Stormwater Management Model (SWMM). The International Journal of Integrated Engineerin, 15 (9). pp. 52-63. ISSN 2229-838X

Norazlina, Bateni and Nur Sakinah, Mohd Fathil and Rosmina, Ahmad Bustami and Hin Lai, Sai and Mohammad Abdul, Mannan and Darrien Yau Seng, Mah (2022) ENVIRONMENTAL ASSESSMENT OF STORMPAV GREEN PAVEMENT FOR STORMWATER MANAGEMENT. Journal of Sustainability Science and Management, 17 (6). pp. 182-192. ISSN 2672-7226

Norazlina, Bateni and Sai, Hin Lai and Putuhena, F.J. and Yau, Darrien Seng Mah and Md Abdul, Mannan and Ren, Jie Chin (2019) Hydrological Performances on the Modified Permeable Pavement with Precast Hollow Cylinder Micro detention Pond Structure. KSCE Journal of Civil Engineering, 23 (9). pp. 3951-3960. ISSN 1226-7988

Norazlina, Bateni and Sai, Hin Lai and Putuhena, Frederik Josep and Mah, D.Y.S. and Md Abdul, Mannan (2018) A Rainfall Simulator Used for Testing of Hydrological Performances of Micro-Detention Permeable Pavement. International Journal of Engineering and Technology, 7 (3.18). pp. 44-48. ISSN 2227-524X

Norazzlina, M.Sa'don and Abdul Razak, Abdul Karim and Bong, Chih How and Wong, Linda Lin Juan (2022) A Web-Based Consolidated Geotechnical Site Investigation (CoGSI) of Sarawak Soils. Journal of Optimization in Industrial Engineering, 15 (1). pp. 217-231. ISSN 2251-9904

Norazzlina, M.Sa'don and Abdul Razak, Abdul Karim and Siti Noor Linda, Taib (2021) Comparative Strength of Fibre Reinforced Peat and Clayey-Silt by Using Shredded Scrap-Tire. Materials Science Forum Vol. 1030, 1030. pp. 124-137. ISSN 1662-9752

Norazzlina, M.Sa‘don and Abdul Razak, Abdul Karim and Bong, Chih How and Wong, Linda Lin Juan and Louisa Dubah, Hubert Chunggat (2020) Development of Consolidated Sarawak Geotechnical Site Investigation for Sarawak Soil. INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 12 (9). pp. 169-175. ISSN 2229-838X

Norazzlina, M.Sa’don and Abdul Razak, Abdul Karim and Siti Noor Linda, Taib and Mahshuri, Yusof (2018) Strength Properties of Reinforced Peat using Fiber-polyester and Shredded Rubber-Crumb as Reinforcement Material. International Journal of Engineering & Technology, 7 (3.18). pp. 26-30. ISSN 2227-524X

Nordiana, Rajaee and Azham, Zulkharnain and Awang Ahmad Sallehin, Awang Husaini (2016) Basic Architecture and Applications of DNA Computing. Transactions on Science and Technology, 3 (1-2). pp. 277-282. ISSN 2289-8786

Norsuzailina, Mohamed Sutan and Nur Izaitul Akma, Ideris and Siti Noor Linda, Taib and Teo, Delsye Ching Lee and Alsidqi, Hassan and Siti Kudnie, Sahari and Khairul Anwar, Mohamad Said and Sobuz, Habibur Rahman (2018) Microstructural characterization of catalysis product of nanocement based materials A review. International Conference on Civil & Environmental Engineering, 34 (01039). pp. 1-7. ISSN 2267-1242

Norsuzailina, Mohamed Sutan and Sinin, Hamdan and Ibrahim, Yakub and Zainal, Abidin Talib (2014) Efflorescence Mitigation By Pozzolanic Industrial By-Products. Malaysian Journal of Civil Engineering, 26 (2).

Norsuzailina, Sutan and Ehsan, Ahmed and Habibur Rahman, Sobuz (2011) Flexural performance of CFRP strengthened RC beams with different degrees of strengthening schemes. International Journal of the Physical Sciences, 6 (9). p. 2229. ISSN 1992 - 1950

Norsuzailina, Mohamed Sutan and Sinin, Hamdan (2013) Efflorescence Phenomenon on Concrete Structures. Advanced Materials Research, 626. pp. 747-750.

Nur Alia Athirah, Hj Mohtadzar and Dyg Norkhairunnisa, Abang Zaidel and Abdul Rahman, Kram and Kasumawati, Lias and Shahrol, Mohamaddan and Mohamad Shaiful, Abdul Karim and Yon Syafni, Samat and Takayama, Shigeru (2020) Wearable Coaching System. International Journal of Integrated Engineering, 12 (6). pp. 158-164. ISSN 2600-7916

Nur Amalina, Hilwane and Norazzlina, M.Sa'don and Abdul Razak, Abdul Karim (2021) Effect of Waste Tire Reinforcement with and Without Cement Additives on Peat Strength Improvement. Defect and Diffusion Forum, 411 (2021). pp. 121-133. ISSN 1662-9507

Nur Aqeela, Syuhadah Aji and Abu Zahrim, Yaser and Junidah, Lamaming and Mohd Al, Mussa Ugak and Sariah, Saalah and Mariani, Rajin (2021) Production of Food Waste Compost and Its Effect on the Growth of Dwarf Crape Jasmine. Jurnal Kejuruteraan, 33 (3). pp. 413-424. ISSN 2289-7526

Nur Liza, Rahim and Francis Ting, Shyue Sheng and Abdul Razak, Abdul Karim and Marcin, Nabialek and Mohd Mustafa, Al Bakri Abdullah and Marek, Sroka (2022) Effect of bolt configurations on stiffness for steel-wood-steel connection loaded parallel to grain for softwoods in Malaysia. Archives of Civil Engineering, 68 (3). pp. 323-338. ISSN 1230-2945

Nur Rasfina, Mahyan and Siti Noor Linda, Taib and Norazzlina, M.Sa'don and Liyana, Truna (2022) Strength enhancement of peat stabilized with rubber chips. Journal of Engineering Science and Technology, 17 (5). pp. 3360-3377. ISSN 1823-4690

Nur Rasfina, Mahyan and Siti Noor Linda, Taib and Norazzlina, M.Sa'don and Liyana, Truna and Jennyfer Joys, John (2023) Correlation of Different Peat Soil Index Properties. INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 15 (9). pp. 23-31. ISSN 2600-7916

Nur Syahina, Yahya and Gaddafi, Ismaili and Meekiong, Kalu and Mohd Effendi, Wasli and Iskanda, Openg and Noor Azland, Jaimudin and Mohamad Zain, Hashim and Ahmad Nurfaidhi, Rizalman and Hamden, Mohammad and Khairul Khuzaimah, Abdul Rahim (2023) The Mechanical Strength Properties, Treatability Retention and Hazard Classification of Treated Small-Clear Fast-Growing Acacia mangium Superbulk at Different Age Groups. Forests, 14 (8). pp. 1-16.

Nur Syahira Syamimi, Razali and Noor Hasyimah, Rosman and Inawati, Othman and Hasnida, Harun3 (2024) Effectiveness of banana peels and papaya seeds as alternative coagulants in water treatment. AIP Conference Proceedings, 3041 (1). pp. 1-9. ISSN 1551-7616

Nur Syuhada, Ahmad Zauzi and Zulkifli, Mohamad and Raa Khimi, Shuib (2021) Development of natural rubber foam with water as a blowing agent via microwave and convection heating methods. Express Polymer Letters, 16 (3). pp. 1-23. ISSN 1788-618X

Nurakmal, Abdullah@ Goh Tuo Ho and Norngainy, Mohd Tawil and Yuzainee, Md Yusoff and Che-Ani, A. I. and Surat, M. (2012) A Study of Management Corporation Financial in High Rise Residential with Correlation of Management Fund and Facilities Provided. International Business Management, 6 (3). pp. 304-307. ISSN 1993-5250

Nurakmal, Abdullah@ Goh Tuo Ho and Utaberta, Nangkula and Spalie, N. and Mazlan, Mohd Tahir (2011) Reconstructing Sustainable Outdoor Learning Environment in Malaysia from the Understanding of Natural School Design and Approaches in Indonesia. Procedia Social and Behavioral Sciences, 15. pp. 3310-3315. ISSN 1877–0428

Nurdiani, Zamhari and Abang Annuar, Ehsan (2017) Large cross-section rib silicon-on-insulator (SOI) S-bend waveguide. Optik, 130. pp. 1414-1420. ISSN 0030-4026

Nurdiani, Zamhari and Abang Annuar, Ehsan and Nordiana, Rajaee and Abdul Rahman, Kram and Dyg Nur Salmi Dharmiza, Awg Salleh (2020) The Effect Of Etch Depth To SOI Large Cross-Section Rib Waveguide. International Journal of Advanced Science and Technology, 29 (7). ISSN 7774-7778

Nurulhuda Shafiqah, Obeng and Abdul Azim, Abdullah (2022) FLEXURAL BEHAVIOUR OF RECTANGULAR CFST BEAMS STRENGTHENED WITH INNOVATIVE STEEL PLATE REINFORCEMENTS. Journal of Engineering Science and Technology, 17 (6). pp. 4320-4334. ISSN 1823-4690

Oon, Y.W. and Chin, N.J. and Law, P.L (2011) Soil Erosion and Sediment Yield of a Sanitary Landfill Site - A Case Study. UNIMAS E-Journal of Civil Engineering, 2 (2).

Osman, Ahmed I. and Zhi, Ying Lai and Mohamed, Farghali and Yiin, Chung Loong and Elgarah, Ahmed M· and Ahmed, Hammad and Ikko, Ihara and Ahmed Sadeq, Al-Fatesh and Rooney, David W· and Yap, Pow Seng (2023) Optimizing biomass pathways to bioenergy and biochar application in electricity generation, biodiesel production, and biohydrogen production. Environmental Chemistry Letters. pp. 1-67.

P, Peter and N M Z, Nik Soh and Z A, Akasah and M A, Mannan (2020) Durability Evaluation of Cement Board produced from Untreated and Pre-treated Empty Fruit Bunch Fibre through Accelerating Ageing. IOP Conf. Series: Materials Science and Engineering, 713. pp. 1-9.

Perry Law, Nyuk Khui and Rezaur, Rahman and Kuok, King Kuok and Muhammad Khusairy, Bakri and Muhammad, Adamu and Diana, Tazeddinova and Zhumayeva A., Kazhmukanbetkyzy, and Baibatyrov, Torebek (2021) Small-size Jatropha Seed Biochar Extracted from Microwave Pyrolysis: Optimization of Its Biocomposites Mechanical Properties by Mixture Design. Bio Resources, 16 (3). pp. 4716-4730. ISSN 1930-2126

Prabir, Kumar Kolay and Md Aminur, Rahman (2016) Physico-geotechnical properties of peat and its stabilisation. Proceedings of the Institution of Civil Engineers: Ground Improvement, 169 (3). pp. 206-216. ISSN 17550750

Praveenna, Nagaratnam and Mannan, B.H., and Rahman, M.A., and Mirasa, M.E., and Richardson, A.K., and Nabinejad O., A., (2019) Strength and microstructural characteristics of palm oil fuel ash and fly ash as binary and ternary blends in Self-Compacting concrete. Construction and Building Materials, 202. pp. 103-120. ISSN 09500618

Priyantha, Wedagama and Dilum, Dissanayake and Nur Zaimah, Ubaidillah (2023) FREIGHT TRANSPORT MODE CHOICE USING A BINARY LOGIT MODEL. Jurnal Teknologi Transportasi dan Logistik, 4 (2). pp. 141-146. ISSN 2745-8954

Pui, Tau Shien and H.N., Seneviratne and Dygku Salma, Awg Ismail (2011) A Study on Factors Influencing the Determination of Moisture Content of Fibrous Peat. UNIMAS E-Journal of Civil Engineering, 2 (2).

Putri, E.E and Kameswara Rao, N.S.V and Mannan, M.A. (2012) Evaluation of modulus of elasticity and modulus of subgrade reaction of soils using CBR test. Journal of Civil Engineering Research, 2 (1). pp. 34-40. ISSN 2163-2340 (online)

Putri, Elsa Eka and Kameswara Rao, N.S.V. and Md Abdul, Mannan (2017) Determination of pavement thickness based on threshold stress of the subgrade soil. International Journal of Civil Engineering and Technology, 8 (10). pp. 753-761. ISSN 09766308

Qurratu-Aini, Sirat and Dayangku Salma, Binti Awang Ismail and Azman, Bin Kassim and Ahmad Safuan, Bin A. Rashid (2018) Application of distributed optical fibre for shallow foundation. MATEC Web of Conferences, 250 (01019). pp. 1-12. ISSN 2557-0250

Rahman, Md Mizanur and Rahman, Md Rezaur and Sinin, Hamdan and Md Faruk, Hossen and Chang, Josephine Hui Lai and Fui, Kiew Liew (2017) Effect of silicon dioxide/nanoclay on the properties of jute fiber/polyethylene biocomposites. Journal of Vinyl and Additive Technology, 23 (1). E107-E112. ISSN 10835601

Rahmi, A. and Taib, S.N.L. and Sahdi, F. and Mapplati, M.J. and Ghani, M.K. (2020) Shear Strength Parameters of Cement Stabilized Amorphous Peat of Various Water Additive Ratios at Different Natural Moisture Contents under Consolidated Undrained Triaxial Test. International Journal of Recent Technology and Engineering (IJRTE), 8 (6). pp. 317-322. ISSN 2277-3878

Rajaee, N. and Junaidi, E. and Taib, S.N.L. and Salleh, S.F. and Munot, M.A. (2013) Issues and Challenges in Implementing Outcome Based Education in Engineering Education. International Journal for Innovation Education and Research, 1 (4). pp. 1-9.

Rakibul, Hasan and Habibur Rahman, Sobuz and Abu Sayed, Mohammad Akid and Md Robiul, Awall and Moustafa, Houda and Ayan, Saha and Md.Montaseer, Meraz and Md. Saiful, Islam and Norsuzailina, Mohamed Sutan (2023) Eco-friendly self-consolidating concrete production with reinforcing jute fiber. Journal of Building Engineering, 63 (A). pp. 1-16. ISSN 2352-7102

Rakibul, Hassan and Md. Habibur Rahman, Sobuz and Abu Sayed, Mohammad Akid and Md. Robiul, Awall and Moustafa, Houda and Ayan, Saha and Md. Montaseer, Meraz and Md. Saiful, Islam and Norsuzailina, Mohamed Sutan (2023) Eco-friendly self-consolidating concrete production with reinforcing jute fiber. Journal of Building Engineering, 63 (pt.A). pp. 1-23. ISSN 2352-7102

Rakibul, Hassan and Md. Habibur Rahman, Sobuz and Abu Sayed, Mohammad Akid and Md. Robiul, Awall and Moustafa, Houda and Ayan, Saha and Md. Montaseer, Meraz and Md. Saiful, Islam and Norsuzailina, Mohamed Sutan (2023) Eco-friendly self-consolidating concrete production with reinforcing jute fiber. Journal of Building Engineering, 63 (PART A). pp. 1-23. ISSN 2352-7102

Raudhah, Ahmadi and Hasmida, Hamza and Imtiyaz, Akbar Najar and Ahmad Faysal, Abdullahi and Norazzlina, M.Sa’don and Nadeem, Akbar Najar (2020) Computational Investigation of Soil Liquefaction Susceptibility based on Standard Penetration Test Value of Miri District (Sarawak, Malaysia). International Journal of Advanced Science and Technology, 29 (7). pp. 2735-2748. ISSN 2207-6360

Raudhah, Ahmadi and Mohd Syukry, Saiful and Idawati, Ismail and Mohammad, Abdul Mannan and Ahmed, Abdullahi and Norsuzailina, Mohamed Sutan (2022) MECHANICAL PERFORMANCE OF POLYPROPYLENE FIBRE REINFORCED MORTAR INCORPORATING PALM OIL FUEL ASH. Journal of Sustainability Science and Management, 17 (6). pp. 92-103. ISSN 2672-7226

Raudhah, Ahmadi and Najar, Imtiyaz Akbar and Abdullahi, A. F. and Galin, T. (2021) Response spectra for moderate seismic area - application to Miri district of Sarawak, Malaysia. IOP Conference Series: Materials Science and Engineering. pp. 1-9. ISSN 1757-899X

Raudhah, Ahmadi and Nurulasma, A I Zainudin and Ismanizan, Bin Ismail and Mannan, M.A. and Ana Sakura, Zainal Abidin (2016) Micro Fine Sized Palm Oil Fuel Ash Produced Using a Wind Tunnel Production System. Advances in Materials Science and Engineering, 2016. pp. 1-6. ISSN 1687-8434

Rhubenthiraan, Kelundapyan and Lee, Yee Yong and Mohd Azuan, Zakaria and Sasitharan, Nagapan and Viknheswar, Chandira Segaran (2020) The Suitability of Porous Material to Simulate Evaporation in Human Sweating Mechanisms. International Journal of Engineering and Advanced Technology (IJEAT), 9 (3). pp. 457-463. ISSN 2249 –8958

Robberta Renuka, Lazarus and Wan Zurina, Wan Jaafar and U.Johnson, Alengaram and Lai, Sai Hin (2023) Overview of the research gaps in the rainfall simulator study. Soil Science Society of America Journal, 87 (6). pp. 1231-1248. ISSN 1435-0661

Robert, Perrin and Daniel, P. Elford and Luke, Chalmers and Gerry, M. Swallowe and Thomas, R. Moore and Sinin, Hamdan and Benjamin, J. Halkon (2014) Normal modes of a small gamelan gong. The Journal of the Acoustical Society of America, 136 (4).

Roliza, Md Yasin and Erwan Hafizi, Kasiman and Norsarahaida, Saidina Amin and Airil Yasreen, Mohd Yassin and Ahmad Kueh, Beng Hong and Norzieha, Mustapha (2023) Effect of Wall Oscillation Period on Fluid Flow in Branched Channel with a Moving Indentation. Malaysian Journal of Fundamental and Applied Sciences, 19. pp. 142-153. ISSN 2289-599X

Ron Aldrino, Chan@Ron Buking and Lwinsky Brina, Anthony and Ervin Rangga, Edwin and Larry Silas, Tirau and Zamri, Bujang and Wan Hashim, Wan Ibrahim (2023) Evaluating the Weathering Effect on Granite, Limestone and Uncrushed River Stone Aggregates for Road Constructions. International Journal of Integrated Engineering (IJIE), 15 (9). pp. 43-51. ISSN 2229-838X

Ron Aldrino, Chan@Ron Buking and Muhamad Nazri, Borhan and Riza Atiq, Abdullah O.K. Rahmat (2024) Evaluation of Sustainable Development for Low-Volume Roads in Sarawak. Jurnal Kejuruteraan, 36 (4). pp. 1373-1384. ISSN 2289-7526

Ron Aldrino Chan, Ron Buking and Borhan, Muhammad Nazri and Rahmat Riza, Atiq Abdullah (2022) PROTOTYPE DEVELOPMENT OF KNOWLEDGE-BASED SYSTEM FOR LOW-VOLUME RURAL ROADS IN SARAWAK. Journal of Sustainability Science and Management, 17 (6). pp. 24-37. ISSN 2672-7226

Ron Aldrino Chan, Ron Buking and Muhamad Nazri, Borhan and Riza Atiq, Abdullah O. K. Rahmat and Wan Hashim, Wan Ibrahim (2020) Critical Parameters for the Development of Web-Based Knowledge System for Low Volume Rural Roads in Sarawak. ICCOEE2020, Lecture Notes in Civil Engineering (LNCE), 1 (1). pp. 1-9. (In Press)

Roslan, Q. and Ibrahim, S.H. and Affandi, R. and Mohd Nawi, M.N. and Baharun, A. (2016) A literature review on the improvement strategies of passive design for the roofing system of the modern house in a hot and humid climate region. Frontiers of Architectural Research, 5 (1). pp. 126-133. ISSN 2095-2635

Rosli, M.F. and Rashidi, A. and Ahmed, E. and Sarudu, N.H. (2011) The Effect of Reinforcement, Expanded Polystyrene (EPS) and Fly Ash On The Strength of Foam Concrete. UNIMAS E-Journal of Civil Engineering, 2 (2).

Rosli, Mohamad Zin and Gui, Hun Chuen and Mukhtar, Che Ali (2009) AN OBSERVATION OF IMPACT IN IMPLEMENTATION OF QUALITY MANAGEMENT SYSTEM BY CONTRACTORS. Malaysian Construction Research Journal, 4 (1). pp. 52-71. ISSN 1985-3807

Rosmina, Ahmad Bustami and Robyn, Rawlings and Simon, Beecham and James, Ward and Darrien Mah, Yau Seng (2023) Living Walls in The City : Community Values and Expectations. International Journal of Integrated Engineering, 15 (9). pp. 79-86. ISSN 2229-838X

Rosmina, Ahmad Bustami and Simon, Beecham and James, Hopeward (2023) The Influence of Plant Type, Substrate and Irrigation Regime on Living Wall Performance in a Semi-Arid Climate. Environments, 10 (2). p. 26.

Rosmina A., Bustami and Chris, Brien and James, Ward and Simon, Beecham and Robyn, Rawlings (2019) A Statistically Rigorous Approach to Experimental Design of Vertical Living Walls for Green Buildings. Urban Science, 3 (71). pp. 1-15. ISSN 2413-8851

Rubiyah, Baini and Madelin, Demong and Lai, Josephine Chang Hui and M M, Kamal and Nur Amalina Shairah, Abdul Samat and Md. Rezaur, Rahman and Siti Noor Linda, Taib (2021) Characterization of Bio-adhesive derived from Sarawak Native Sago Starch. IOP Conference Series. Materials Science and Engineering, 1101 (1). pp. 1-12.

Rumana, Tasnim and Sheroz, Khan and Musse, Mohamud Ahmed and Atika, Arshad (2016) A QUALITATIVE ANALYSIS OF BIOMASS FLOW SENSING BEHAVIOR USING CAPACITIVE TECHNIQUE. IIUM Engineering Journal, 17 (1). pp. 29-40.

S. N., Ting and V. C., Darrell and A. B. H., Kueh and Y. Y., Lee and C.K., Ng (2021) Extension of Time (EoT) Considerations in Construction Duration Estimate for Public Construction Projects. IOP Conference Series: Materials Science and Engineering, 1101 (2021). pp. 1-7. ISSN 1757-899X

S.H., Ibrahim and Sia, W.K. and A., Baharun and M.N.M., Nawi and R., Affandi (2014) Thermal Performance of Oil Palm Fibre and Paper Pulp as the Insulation Materials. UNIMAS e-Journal of Civil Engineering.

SYAIDATUS SYAHIRA, AHMAD TARMIZI and Nor Surayahani, Suriani and Fadilla 'Atyka, Nor Rashid (2022) A Review of Facial Thermography Assessment for Vital Signs Estimation. IEEE Access, 10. pp. 115583-115602. ISSN 2169-3536

Saaid, M.N.F and Ayob, M.A. and Yunus, A.I.A and Razali, A.W. and Maarof, K.A (2018) The Challenges of Space Management in Higher Education Institution. IOP Conference Series: Materials Science and Engineering, 429 (1). ISSN 1757-8981

Sabri, M.F.M. and Husin, M.H. and Chai, S.K. (2010) Development of a Timetabling Software Using Soft-computing Techniques With a Case Study. The 2nd International Conference on Computer and Automation Engineering (ICCAE), 2010. ISSN ISBN: 978-1-4244-5586-7

Sadia, Tasnim and Muhammad Ekhlasur, Rahman and Raudhah, Ahmadi (2018) Mechanical performance of modified cement paste made with micro-fine POFA in ammonium nitrate environment. Construction and Building Materials, 162. pp. 534-542. ISSN 09500618

Safawi, M.I. and Taib, S.N.L. and Hua, L.P. and Rashidi, A. (2020) Investigating an optimummixing methodto produce foam concrete fulfilling the workability, density, shrinkage, strength and total volume criteria. Lecture Notes in Civil Engineering (LNCE). (Submitted)

Sahdi, F. and Gaudin, C. and White, D.J. (2013) Strength properties of ultra-soft kaolin. Canadian Geotechnical Journal. pp. 420-431.

Said, J.M. and Razali, I. (2009) Peat stabilization with carbide lime. UNIMAS E-Journal of civil Engineering, 1 (1).

Salisu, Muhammad Lawan and Wan Azlan, Wan Zainal Abidin (2018) Wind energy assessment and mapping using terrain nonlinear autoregressive neural network (TNARX) and wind station data. Cogent Engineering, 5 (1). pp. 1-21. ISSN 2331-1916

Salisu Muhammad, Lawan and Wan Azlan, Wan Zaina Abidinl and Thelaha, Bin Hj Masri and Chai, Wangyin and Baharun, Azhaili (2017) Wind power generation via ground wind station and topographical feedforward neural network (T-FFNN) model for small-scale applications. Journal of Cleaner Production, 143 (1). pp. 1246-1259. ISSN 09596526

Samad, N.A. and Zaidel, D.N.A. and Salleh, E. and Yusof, A.H.M and Dailin, D.J (2019) Optimization of plectranthus amboinicus (Lour.) spreng extraction process using microwave-assisted technique. Chemical Engineering Transactions, 72. pp. 397-402. ISSN 2283-9216

Sara, Ahmed and Farid, Abed and Mohammad, Abdul Mannan (2022) Compressive Strength Development of Dune Sand Reactive Powder Concrete (RPC) Under Different Curing Conditions. IOP Conference Series: Earth and Environmental Science.

Sara, Ahmed and Zahraa, Al-Dawood and Farid, Abed and Mohammad Abdul, Mannan and Mufid, Al-Samarai (2021) Impact of using different materials, curing regimes, and mixing procedures on compressive strength of reactive powder concrete - A review. Journal of Building Engineering, 44 (2021). pp. 1-17.

Saravana Kannan, Thangavelu and Rajkumar, T., and Dinesh Kumar, Pandi and Abu Saleh, Ahmed and Farid Nasir, Ani (2019) Microwave assisted acid hydrolysis for bioethanol fuel production from sago pith waste. Waste Management, 86. pp. 80-86. ISSN 0956-053X

Sedik, Yahya and Hamdan, Sinin and Jusoh, Ismail and Hasan, Mahbub (2010) Acoustic Properties of Selected Tropical Wood Species. Journal of Nondestructive Evaluation March 2010, Volume 29, Issue 1, pp 38-42.

See, Hung Lau and Tay, Kai Meng and Chee, Khoon Ng (2013) Monotonicity preserving SIRMs-connected fuzzy inference systems with a new monotonicity index: Learning and tuning. Fuzzy Systems (FUZZ), 2013 IEEE International Conference. pp. 1-7. ISSN 1098-7584

Shafrida, Sahrani and Tatsuya, Akata and Michiko, Kuroda (2013) FDTD method for the analysis of the EM field from a moving source. Asia-Pacific Microwave Conference Proceedings. pp. 288-290.

Shahid, Ullah and Ahmed Mohamed, Ahmed Haidar and Hushairi, Zen (2020) Assessment of technical and financial benefits of AC and DC microgrids based on solar photovoltaic. Electrical Engineering. pp. 1-14.

Shahidul, M.I. and Malcolm, M.L. and Eugene, J.J. and Sharafatul, M.I. (2020) OPTIMIZING PRODUCTIVITY IN SEPARATING BIOMASS AND ORGANIC MATERIALS FROM PALM OIL MILL EFFLUENT: EXPERIMENT TOWARDS REDUCING CARBON EMISSION FOR CLIMATE CHANGE AFFECT. Sci. Int. (Lahore), 32 (5). pp. 547-556. ISSN 1013-5316

Shahrol, Mohamaddan and Case, Keith (2016) Crowd simulation : a video observation and agent-based modelling approach. International Journal of the Digital Human, 1 (3). pp. 229-247. ISSN 2046-3383

Shahrul Niza, Mokhatar and Redzuan, Abdullah and Ahmad Kueh, Beng Hong (2013) Computational impact responses of reinforced concrete slabs. Computers and Concrete, 12 (1). pp. 37-51. ISSN 1598-8198

Shaikuthali, S.A. and Mannan, Mohammad Abdul and Dawood, Eethar Thanon and Teo, DCL and Raudhah, Ahmadi and Idawati, Ismail (2019) Workability and compressive strength properties of normal weight concrete using high dosage of fly ash as cement replacement. Journal of Building Pathology and Rehabilitation, 4 (26). ISSN 2365-3159 (Print)

Shamsiah, Binti Suhaili and Takahiro, Watanabe (2016) High throughput evaluation of SHA-1 implementation using unfolding transformation. ARPN Journal of Engineering and Applied Sciences, 11 (5). pp. 3350-3355. ISSN 1819-6608

Sharon, Robert and Idawati, Ismail and Raudhah, Ahmadi and Nur Amalina Shairah, Abdul Samat (2021) Comparison of Mechanical and Microstructural Properties of Fly Ash Geopolymer in Water and Chloride Environment. Defect and Diffusion Forum, 411 (2021). pp. 143-155. ISSN 1662-9507

Sherra Bellina, Barrabas and Rubiyah, Baini and Norsuzailina, Mohamed Mohamed Sutan and Yakub, Ibrahim and Khairul Anwar, Mohamad Said and Nur Syuhada, Ahmad Zauzi and Noraziah, Abdul Wahab and Hapiszul, Sulaiman (2016) HC-SCR: NOx Reduction using Mn and Cu Catalysts Impregnated in Coconut and Palm Kernel Shell Activated Carbon. MATEC Web of Conferences, 87. pp. 1-6. ISSN 2261236X

Shin Ying, Foong and Yi Herng, Chan and Bridgid Lai Fui, Chin and Serene Sow Mun, Lock and Cia Yin, Yee and Chung Loong, Yiin and Wanxi, Peng and Su Shiung, Lam (2022) Production of biochar from rice straw and its application for wastewater remediation − An overview. Bioresource Technology, 360 (127588). pp. 1-16. ISSN 0960-8524

Shin Ying, Foong and Yi Herng, Chan and Serene Sow, Mun Lock and Bridgid Lai Fui, Chin and Chung Loong, Yiin and Kin Wai, Cheah and Adrian Chun Minh, Loy and Peter Nai Yuh, Yek and William Woei Fong, Chong and Su Shiung, Lam (2022) Microwave processing of oil palm wastes for bioenergy production and circular economy: Recent advancements, challenges, and future prospects. Bioresource Technology. pp. 1-15. ISSN 0960-8524

Shuvo Dip, Datta and Md. Habibur Rahman, Sobuz and Mohammad Nafe, Assafi and Norsuzailina, Mohamed Sutan and Md. Nazrul, Islam and Maria, Mannan and Abu Sayed, Mohammad Akid and Noor Md. Sadiqul, Hassan (2023) Critical project management success factors analysis for the construction industry of Bangladesh. International Journal of Building Pathology and Adaptation. ISSN 2398-4708

Shuvo Dip Datta, Datta and Md. Habibur Rahman, Sobuz and Mohammad Nafe, Assafi and Norsuzailina, Mohamed Sutan and Md. Nazrul, Islam and Maria, Mannan and Abu Sayed, Mohammad Akid and Noor Md. Sadiqul, Hasan (2023) Critical project management success factors analysis for the construction industry of Bangladesh. International Journal of Building Pathology and Adaptation. pp. 1-30. ISSN 2398-4708

Shyue, Leong Lee and Mohammad, Abdul Mannan and Ivonson, Kwee and Chiang, Chong Kian (2021) Performance of Jute Fabric-Reinforced Polymer Concrete as Permanent Formwork. Lecture Notes in Civil Engineering, 194. pp. 279-288.

Shyue, Leong Lee and Mohammad, Abdul Mannan and Wan Hashim, Bin Wan Ibrahim (2018) Polishing resistance of polymer concrete pavement using limestone aggregate. International Journal of Pavement Engineering. pp. 1-10. ISSN 1477-268X

Sim, D.H.H. and Ivy Tan, Ai Wei and Lim, L.L.P. and Lau, E.T and Hameed, Bassim Hamid (2024) Synthesis of tapioca starch/palm oil encapsulated urea-impregnated biochar derived from peppercorn waste as a sustainable controlled-release fertilizer. Waste Management, 173. pp. 51-61. ISSN 1879-2456

Sim, Nee Ting and Chee, Khoon Ng (2019) Quantitative Model for the Systematic Evaluation of Standard Form of Civil Engineering Contract. International Journal of Recent Technology and Engineering (IJRTE), 8 (4). ISSN 2277-3878

Sim, Nee Ting and Wei, Kiet Hu (2013) Comparative study of structural steel and reinforced concrete construction methods : a Malaysian case study. Universiti Malaysia Sarawak.

Sim Nee, Ting and Jarit, Beatrice and Yee Yong, Lee (2022) OCCURRENCE AND IMPACT ANALYSIS FOR TIME-RELATED RISKS IN MALAYSIA PUBLIC INFRASTRUCTURE PROJECTS. Journal of Sustainability Science and Management, 17 (6). pp. 104-127. ISSN 2672-7226

Siti, Nikmatin and Bambang, Hermawan and Irmansyah, Irmansyah and Mohammad, Nur Indro and Ahmad Kueh, Beng Hong and Achmad, Syafiuddin (2018) Evaluation of the Performance of Helmet Prototypes Fabricated from Acrylonitrile Butadiene Styrene Composites Filled with Natural Resource. Materials, 12 (34). pp. 2-12. ISSN 1996-1944

Siti Farhanah, SM Johan and Chan, Chee Ming (2024) Accelerated consolidation of dredged marine soils with incorporation of granular wastes as drainage layers. AIP Conference Proceedings, 2838 (1). 030023-1-030023-10. ISSN 1551-7616

Siti Farhanah, SM Johan and Chan, Chee Ming (2019) Consolidation of dredged marine soils with single and doubled drainage. Malaysian Construction Research Journal, 27 (1). pp. 19-26. ISSN 1985-3807

Siti Farhanah, SM Johan and Chan, Chee Ming (2018) Effect of granular inclusions on the consolidation rate of dredged marine clay. Malaysian Construction Research Journal, 5 (3). pp. 73-80. ISSN 2590 - 4140

Siti Farhanah, SM Johan and Chan, Chee Ming (2020) Influence of Drainage Layer Thickness on the Preconsolidation Rate of Dredged Marine Soils : A Lab Simulation. IOP Conference Series: Earth and Environmental Science, 616. pp. 1-6. ISSN 1755-1307

Siti Farhanah, SM Johan and Chan, Chee Ming (2016) Shear Resistance Enhancement of Oil-Contaminated Railtrack Ballast with Rubber Circular Patch Formulation. Key Engineering Materials, 701. pp. 320-324. ISSN 1662-9795

Siti Farhanah, SM Johan and Chan, Chee Ming and Tan, Poi Cheong and Mohammad Zawawi, Rosman (2024) Consolidation of a High Plasticity Dredged Marine Clay Incorporating Single Drainage Path With Granular Geowastes. Journal of Advanced Research in Applied Mechanics, 119 (1). pp. 83-91. ISSN 2289-7895

Siti Farhanah, SM Johan and Chee Ming, Chan (2020) Consolidation Behaviour of Dredged Marine Soils Considering the Incorporation of Granular Drainage Layer. IOP Conference Series : Materials Science and Engineering, 713. pp. 1-8. ISSN 1757-8981

Siti Farhanah, SM Johan and Chee Ming, Chan (2017) Oedometric study of dredged marine soils admixed with sand for settlement reduction. International Journal of GEOMATE, 13 (38). pp. 59-62. ISSN 2186-2990

Siti Farhanah, SM Johan and Mohammad Zawawi, Rosman and Chee Ming, Chan and Norsilan, Wahiduddin (2017) Geotechnical properties of dredged marine sediments from Malaysian waters. Journal Online Jaringan Pengajian Seni Bina, 5 (1). pp. 20-26. ISSN 2504-8457

Siti Halida, Ahmad and Nordiana, Rajaee and Sharifah Masniah, Wan Masra and Norhuzaimin, Julai and Rohana, Sapawi and Siti Kudnie, Sahari (2005) Nonlinear filtering for impulsive noise reduction. (Unpublished)

Siti Halipah, Binti Ibrahim and Nurul Izzati, Binti Ahmat Ibrahim and Julaihi, Bin Wahid and Nurakmal Abdullah, @ Goh Tuo Ho and Dona Rose, Binti Koesmeri and Mohd Nasrun, Bin Mohd Nawi (2018) The Impact Of Road Pavement On Urban Heat Island (UHI) Phenomenon. International Journal of Technology, 8. pp. 1597-1608. ISSN 2086-9614

Siti Halipah, Ibrahim and Julaihi, F. and Azhaili, Baharun and Koesmeri, D.R. and Mohd Nasrun, Bin Mohd Nawi (2018) Investigating the Performance of Indoor Environment and Energy Management Implementation System in Office Building. Ekoloji, 27 (106). pp. 87-94. ISSN 1300-1361

Siti Halipah, Ibrahim and Qairuniza, Roslan and Rohaida, Affandi and Abdul Wafi, Razali and Yon Syafni, Samat and Mohd Nasrun, Mohd Nawi (2018) Study On The Optimum Roof Type With 30° Roof Angle To Enhance Natural Ventilation And Air Circulation Of A Passive Design. International Journal of Technology, 8. pp. 1692-1701. ISSN 2086-9614

Siti Jahara, Matlan and Nazaruddin, Abdul Taha and Salinah, Dullah and Mohammad Radzif, Taharin and Hasmida, Hamza (2021) Analysis of Rainfall Effect on Slope Failure in Sabah. Malaysian Construction Research Journal, 33 (1). pp. 93-100. ISSN 1985-3807

Siti Noor Linda, Binti Taib and Kolay, Prabir K and Aminur, M.R and Mohd Zain, M. I. S. (2011) Stabilization of Tropical Peat Soil from Sarawak with Different Stabilizing Agents. Geotechnical and Geological Engineering, 29 (6). pp. 1135-1141. ISSN 1573-1529

Siti Noor Linda, Binti Taib and Onni Suhaiza, Binti Selaman and Chen, C. L. and Lim, R. and Dayangku Salma, Binti Awang Ismail (2017) Landslide Susceptibility in Relation to Correlation of Groundwater Development and Ground Condition. Advances in Civil Engineering, 2017 (1). pp. 1-7. ISSN 1687-8086

Siti Noor Linda, Binti Taib and Yong, Weng Long and Onni Suhaiza, Binti Selaman (2017) Evaluation of Critical Parameters to Improve Slope Drainage System. Advances in Civil Engineering, 2017 (4). pp. 1-9. ISSN 1687-8086

Siti Noor Linda, Taib and Afiqah, I and Galvinov Indit, G.J (2023) Chemical Stabilization of Amorphous Peat Using Cement and Fly Ash at Different Water Additive Ratios. INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 15 (9). pp. 1-12. ISSN 2600-7916

Siti Noor Linda, Taib and I., Afiqah and G.J., Galvinov Indit (2023) Chemical Stabilization of Amorphous Peat Using Cement and Fly Ash at Different Water Additive Ratios. INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 15 (9). pp. 1-12. ISSN 2229-838X (In Press)

Siti Nor Linda, Binti Taib and Striprabu, Strimari and Fauziah, Binti Ahmad and Foo, Kelvin Chin Yen and Khor, Brandon Ling Seong (2018) Study On Influence Of Moisture Content In Cement Stabilized Serian Soil. MCRJ Special Issue, 5 (3). pp. 174-183. ISSN 2590 - 4140

Siti Rozana, Romali and Norazzlina, M.Sa'don and Abdul Razak, Abdul Karim (2021) Strength Enhancement of Fibre Reinforced Peat with Fly Ash as Stabilized Subgrade Layer. Defect and Diffusion Forum, 411 (2021). pp. 109-120. ISSN 1662-9507

Sitti Diana, Tamjehi and Afzan, Ahmad Zaini and Nadia, Zaini and Abdul Wafi, Razali and Gui, Hun Chuen (2020) Exploring Building Information Modeling (BIM) Awareness in Sarawak Construction Industry. IOP Conference Series: Earth and Environmental Science, 498. pp. 1-8.

Sitti Diana, Tamjehi and Afzan, Ahmad Zaini and Nadia, Zaini and Abdul Wafi, Razali and Nurfadilah, Darmansah (2020) THE CONSCIOUSNESS IN TERM OF LEVEL OF KNOWLEDGE AND IMPLEMENTATION AMONG DEVELOPER ON THE CURRENT SUSTAINABLE CONSTRUCTION PRACTICE IN MALAYSIA. Malaysian Construction Research Journal, 32 (3). pp. 37-49. ISSN 1985-3807

Sofi Azilan, Aini and Achmad, Syafiuddin and Ahmad Kueh, Beng Hong (2023) Quantification, characteristics, and distribution of microplastics released from waste burning furnaces and their associated health impacts. Environmental Quality Management, 33 (1). pp. 303-310. ISSN 1520-6483

Striprabu, S. and Siti Noor Linda, Taib and Norazzlina, M.Sa'don and Fauziah, Ahmad (2018) Chemical Stabilization of Sarawak Clay Soil with Class F Fly Ash. Journal of Engineering Science and Technology, 13 (10). pp. 3029-3042. ISSN 1823-4690

Suhaili, S. and Watanabe, T. (2016) Design of Optimized Pipelined RIPEMD-160 with High Frequency and Throughput. Journal of Advanced Research in Computing and Applications, 3 (1). pp. 18-28. ISSN 2462-1927

Syahrun Neizam, Mohd Dzulkifli and Abd Halid, Abdullah and Lee, Yee Yong and Mohd Mahathir, Suhaimi Shamsuri and Zawawi, Daud (2018) Classification of Potential Risk Factors through HIRARC Method in Assessing Indoor Environment of Museums. International Journal of Integrated Engineering, 10 (8). pp. 43-55. ISSN 2600-7916

Tan, I. A. W. and Mohammad Omar, Abdullah and Lim, L.L.P. and Yeo, T.H.C. (2017) Surface Modification and Characterization of Coconut Shell-Based Activated Carbon Subjected to Acidic and Alkaline Treatments. Journal of Applied Science & Process Engineering, 4 (2). ISSN 2289-7771

Tan, I.A.W and Wu, W.H and Chan, R.A and Lim, L.L.P (2014) Effect of Mercerization and Acetylation on Properties of Coconut Fiber and its Influence on Modified Bitumen. UNIMAS e-Journal of Civil Engineering, 5 (1). ISSN 1985-3874

Tan, Melvina and Ibrahim, Bin Yakub and Taufiq-Yap, Yun Hin (2020) Passive Nitrogen Oxides Removal from a Diesel-engine Exhaust Gas Using a Biomass-carbon Catalyst. Journal of Applied Science and Process Engineering, 7 (1). pp. 479-488. ISSN 2289-7771

Tan, Wei Li and Lee, Yeong Huei and Tan, Cher Siang and Lee, Yee Yong and Kueh, Ahmad Beng Hong (2022) MECHANICAL PROPERTIES AND FRACTURE PREDICTION OF CONCRETES CONTAINING OIL PALM SHELL AND EXPANDED CLAY FOR FULL REPLACEMENT OF CONVENTIONAL AGGREGATES. Jurnal Teknologi, 84 (2). pp. 171-181. ISSN 0127-9696

Tan, Yie Hua and Mohammad Omar, Abdullah and Cirilo, Nolasco-Hipolito (2015) The potential of waste cooking oil-based biodiesel using heterogeneous catalyst derived from various calcined eggshells coupled with an emulsification technique: A review on the emission reduction and engine performance. Renewable and Sustainable Energy Reviews, 47. pp. 589-603. ISSN 1364-0321

Tan, Yiehua and Mohammad Omar, Abdullah and Cirilo Nolasco, Nolasco-Hipólito and Nur Syuhada, Ahmad Zauzi and Wong, Georgie Abdullah (2017) Engine performance and emissions characteristics of a diesel engine fueled with diesel-biodiesel-bioethanol emulsions. Energy Conversion and Management, 132. pp. 54-64. ISSN 01968904

Tan Y, Y.H and Abdullah, M.O. and Kansedo, J. and Mubarak, N.M. and Chan, Y.S. and Nolasco-Hipolito, C. (2019) Biodiesel production from used cooking oil using green solid catalyst derived from calcined fusion waste chicken and fish bones. Renewable Energy, 139. pp. 696-706. ISSN 9601481

Tay, K.M and Chian, H.J and Chee, P.L (2014) A clustering-based failure mode and effect analysis model and its application to the edible bird nest industry. Neural Computing and Applications, 26 (3). ISSN 1433-3058

Tay, Kai Meng (2015) An Analytical Interval Fuzzy Inference System for Risk Evaluation and Prioritization in Failure Mode and Effect Analysis. IEEE Systems journal (99). pp. 1-12. ISSN 1932-8184

Tay, Kai Meng and Liew, Meng Pang and Chee, Peng Lim (2016) Monotone Fuzzy Rule Relabeling for the Zero-Order TSK Fuzzy Inference System. IEEE Transactions on Fuzzy Systems, 24 (6). pp. 1455-1463. ISSN 1063-6706 (In Press)

Tay, Kai Meng and Liew, Meng Pang and Tze, Ling Jee (2013) A New Framework With Similarity Reasoning and Monotone Fuzzy Rule Relabeling for Fuzzy Inference Systems. IEEE International Conference on Fuzzy Systems (FUZZ), 2013. ISSN 1098-7584

Tee, Peifang and Mohammad Omar, Abdullah and Tan, I.A.W. and Mohamed Afizal, Mohamed Amin and Cirilo Nolasco, Nolasco-Hipólito and Kopli, Bin Bujang (2017) Effects of temperature on wastewater treatment in an affordable microbial fuel cell-adsorption hybrid system. Journal of Environmental Chemical Engineering, 5 (1). pp. 178-188. ISSN 22133437

Tengku Hasbullah, T.N.A and Selaman, O.S and Rosli, N.A (2014) Removal of Methylene Blue from Aqueous Solutions using Chemical Activated Carbon Prepared from Jackfruit (Artocarpus heterophyllus) Peel Waste. UNIMAS e-Journal of Civil Engineering, 5 (1).

Tengku Mohd Afendi, Zulcaffle and Kurugollu, F., and Crookes, D., and Bouridane, A., and Farid, M. (2018) Frontal view gait recognition with fusion of depth features from a time of flight camera. Frontal view gait recognition with fusion of depth features from a time of flight camera, 14 (4). pp. 1067-1082. ISSN 15566013

Teo, DCL and Ling, I.H (2011) Properties of EPS RHA lighweight concrete bricks under different curing conditions. Construction and Building Materials, 25 (8). pp. 3648-3655.

Tharima, A.F., and Rahman, M.M., and Yusoff, M.Z., and Kueh, A.B.H. (2019) Multi-objective optimization of underground car park design for tenability under fire-induced smoke. Tunnelling and Underground Space Technology, 85. pp. 220-230. ISSN 0886-7798

The Borneo, Post (1999) Foreign firms to expand operations in S'wak. -. (In Press)

Then, C.S. and Tan, Ivy Ai Wei and Ting, W.H.T. and Shanti Faridah, Salleh and Noraziah, Abdul Wahab and Abdul Aziz, Abdul Raman (2023) Dynamic modelling and simulation of eutectic freeze crystallization process for recovery of ammonium sulphate from aqueous solutions. Journal of Water Process Engineering, 54. pp. 1-13.

Tianqi, Liu and Chukwunonso O., Aniagor and Marcel I., Ejimofor and Matthew C., Menkiti and Kuok Ho Daniel, Tang and Bridgid Lai Fui, Chin and Yi Herng, Chan and Chung Loong, Yiin and Kin Wai, Cheah and Yee Ho, Chai and Serene Sow Mun, Lock and Kok Liang, Yap and Melvin Xin Jie, Wee and Pow Seng, Yap (2023) Technologies for removing pharmaceuticals and personal care products (PPCPs) from aqueous solutions: Recent advances, performances, challenges and recommendations for improvements. Journal of Molecular Liquids, 374. pp. 1-50. ISSN 1873-3166

Ting, Sim Nee and Ang, Chern Xing and Lee, Yee Yong (2024) Assessing the Post-Disaster Effects of COVID-19 Pandemic Towards Malaysian Construction Industry. Journal of Construction in Developing Countries, 29 (Supp 1). pp. 59-75. ISSN 1823-6499

Ting, Sim Nee and Beatrice, Jarit (2020) Sources of Risk and Related Effects in the Malaysian Construction Industry. Lecture Notes in Civil Engineering (LNCE). pp. 1-14. (In Press)

Ting, Sim Nee and Lee, Yee Yong and Mohd Nur-Faiz, Haris (2025) Discerning the Disparity between Stipulated Contractual Payment Procedures and Payment Practices among Contractors. Journal of Legal Affairs and Dispute Resolution in Engineering and Construction, 17 (1). pp. 1-16. ISSN 1943-4170

Ting, Sim Nee and Sakawi, A. M. F. and Lau, Hieng Ho and Whyte, A. (2022) Minimisation of Construction Waste Using the Principles of Waste Management. ASM Science Journal, 17. pp. 1-9. ISSN 1823-6782

Ting, Wee Kiet and Alsidqi, Hasan and Fauzan, Sahdi and Siti Noor Linda, Taib and Norsuzailina, Mohamed Sutan and Badrulhisham, Abdul Aziz (2018) Interfacial friction behaviour in narrow wall paste backfill system. MCRJ Special Issue, 5 (3). pp. 52-56. ISSN 2590 - 4140

Ting`, Wee Kiet and Alsidqi, Hasan and Fauzan, Sahdi and Siti Noor Linda, Taib and Norsuzailina, Mohamed Sutan and Badhrulhisham, Abdul Aziz and Andy, Fourie (2017) A Narrow Wall System to Capture Temperature-Stress-Strain Behavior in Paste Backfill. Geotechnical Testing Journal, 43 (2). pp. 1-38. ISSN 1945-7545

Tshun Li, Yap and Adrian Loy, Chun Minh and Bridgid Chin, Lai Fui and Juin Yau, Lim and Hatem, Alhamzi and Yee Ho, Chai and Chung Loong, Yiin and Kin Wai, Cheah and Melvin Wee, Xin Jie and Man Kee, Lam and Zeinab Abbas, Jawad and Suzana, Yusup and Serene Lock, Sow Mun (2022) Synergistic effects of catalytic co-pyrolysis Chlorella vulgaris and polyethylene mixtures using artificial neuron network: Thermodynamic and empirical kinetic analyses. Journal of Environmental Chemical Engineering, 10 (107391). pp. 1-14. ISSN 2213-3437

Tze, Ling Jee and Tay, Kai Meng (2012) Enhancing a Fuzzy Inference System-Based Criterion-referenced Assessment with an Analogical Reasoning Schema. Procedia - Social and Behavioral Sciences, 56. pp. 12-21. ISSN 1877-0428

Ullah, Shahid and Haidar, Ahmed M.A. and Hoole, Paul R. and Hushairi, Zen and Ahfock, Tony (2020) The Current State of Distributed Renewable Generation, Challenges of Interconnection and Opportunities for Energy Conversion based DC Microgrids. Journal of Cleaner Production.

Vincent, M. and Pometto III, A.L. and Leeuwen, J.V. (2014) Ethanol production via simultaneous saccharification and fermentation of sodium hydroxide treated corn stover using Phanerochaete chrysosporium and Gloeophyllum trabeum. Bioresource Technology, 158. pp. 1-6.

W.L., Freddy Kho and J., Sentian and Radojevic, M. and C.L. , Tan and P.L. , Law and S. , Halipah (2007) Computer simulated versus observed NO2 and SO2 emitted from elevated point source complex. International Journal Environmental Science Technology, 4 (2). pp. 215-222. ISSN 1735-1472

Walter Janting, Ngelambai and Alsidqi, Hasan (2024) Effects of Filter Material on the Permeability of Sapric Peat in Flexible Wall Permeability Tests. The Open Civil Engineering Journal, 18. pp. 1-17. ISSN 1874-1495

Wan Farhana, Mohamad and Amir Azam, Khan and Pierre, Barroy and Oliver, Durand-Drouhin and Clement, Puille and Abdelilah, Lahmar and Faiz, Ahmad (2020) Microstructure and surface characterization of Ni-Cr based composites containing variable solid lubricants. Tribology - Materials, Surfaces & Interfaces.

Wan Hanna Melini, Wan Mohtar and Bong, C.H.J. and Aminuddin, Ab. Ghani and Mir Jafar Sadegh, Safari and Aizat Mohd, Taib and Haitham Abdulmohsin, Afan and Ahmed, El-Shafie (2022) Sediment Incipient Motion in Sewer with a Bed Deposit. Teknik Dergi, 33 (1). pp. 11473-11486. ISSN 1300-3453 (In Press)

Wan Hanna Melini, Wan Mohtar and Bong, Charles Hin Joo and Aminuddin, Ab. Ghani and Mir Jafar Sadegh, Safari and Aizat Mohd, Taib and Haitham Abdulmohsin, Afan and Ahmed, El-Shafie (2022) Sediment Incipient Motion in Sewer with a Bed Deposit. Teknik Dergi, 33 (1). pp. 11473-11486. ISSN 1300-3453

Wan Hanna Melini, Wan Mohtar and Haitham, Afana and Ahmed, El-Shafie and Hin, Charles Joo Bong and Aminuddin, Ab Ghani (2018) Influence of bed deposit in the prediction of incipient sediment motion in sewers using artificial neural networks. Urban Water Journal, 15 (4). pp. 1-7. ISSN 1573062X

Wan Nadzri, Osman and Mohd Nasrun, Mohd Nawi and Rohaizah, Saad and Herman Shah, Anuar and Siti Halipah, Ibrahim (2016) A proposal for improving sustainability practice through the implementations of reuse and recycle technique in Malaysian construction industry. AIP Conference Proceedings, 1761. ISSN 0094243X

Wan Nazihah Liyana, Wan Jusoh and Denesh, Mohan and Mohd Shaiful, Sajab and Peer Mohamed, Abdul and Hatika, Kaco and Gongtao, Ding and Rubiyah, Baini (2023) Nanocellulose-Based Biomaterial Ink Hydrogel for Uptake/Release of Bovine Serum Albumin. Polymers, 15 (4). pp. 1-12.

Wan Nur Fadhlina Syamimi, Wan Azman and Ku Nurul Fazira, Ku Azir and Amiza, Amir and Hamimah, Ujir (2023) Multi-classification of Freshness from Leftover-cooked Food in Malaysian Foods using Machine Learning. AIP Conference Proceedings, 2579 (1). pp. 1-8. ISSN 1551-7616

Wang, Xiao-Hui and Hu, Dong-Gang and Kueh, Ahmad Beng Hong and Shi, Dan-Da (2022) Prediction of Equivalent Chloride Ion Diffusion Coefficient in Cracked Concrete of the in-Service RC Element. KSCE Journal of Civil Engineering. pp. 1-12. ISSN 1976-3808

Wee, Kiet Ting and Alsidqi, Hasan and Fauzan, Sahdi and Siti Noor Linda, Taib and Norsuzailina, Mohamed Sutan and Badhrulhisham, Abdul Aziz and Andy, Fourie (2019) A Narrow Wall System to Capture Temperature Stress–Strain Behaviorin Paste Backfill. Geotechnical Testing Journal, 43 (2). pp. 310-324. ISSN 0149-6115

Wilson Rangga, Anthony Jiram and Fauziah, Raji and Fatin, Aziz and Ibrahim, Sipan (2019) Establishing Semantic Network of the Malaysian Affordable Housing Livability Dimensions. International Journal of Real Estate Studies. INTERNATIONAL JOURNAL OF REAL ESTATE STUDIES, 13 (1). pp. 89-94. ISSN 2231-7643

Winnie Huong, Tien Ting and Ivy Tan, Ai Wei and Shanti Faridah, Salleh and Noraziah, Abdul Wahab and Mohd Farid, Atan and A. A., Abdul Rahman and Kong, S. L. and Lam, L. S. (2024) Sustainable saline wastewater treatment using eutectic freeze crystallization : Recent advances, challenges and future prospects. Journal of Environmental Chemical Engineering, 12 (1). pp. 1-15. ISSN 2213-2929

Xavier Langit, Ujan and Abdul Razak, Abdul Karim and Norazzlina, M. Sa'don and Siti Hanim, Sahari and Nur Liza, Rahim and Pierre, Quenneville (2023) VALIDATION OF SHEAR FAILURE ON BOLTED CONNECTION FOR NYATOH HARDWOOD. Journal of Engineering Science and Technology, 18 (5). pp. 2396-2408. ISSN 1823-4690

Xavier Langit, Ujan and Abdul Razak, Abdul Karim and Norazzlina, M.Sa'don and Xin Yao, Teng and Pierre, Quenneville and Nur Liza, Rahim (2022) EFFECTIVENESS VALIDATION ON EXISTING DESIGN EQUATIONS FOR THE SUSTAINABLE DESIGN OF MASONRY BUILDING RETROFITS. Journal of Sustainability Science and Management, 17 (6). pp. 79-91. ISSN 2672-7226

YAXING, WEI and HUZAIFA, HASHIM and Lai, Sai Hin and CHONG, KAI LUN and HUANG, YUK FENG and ALI NAJAH, AHMED and MOHSEN, SHERIF and AHMED, EL-SHAFIE (2024) Comparative Analysis of Artificial Intelligence Methods for Streamflow Forecasting. IEEE Access, 12. pp. 10865-10885. ISSN 2169-3536

Yanuar, Z. Arief and Nur Izziani, Roslan and Mohd Hafiez Izzwan, Saad and Lakshmanan, Gurusamy and Nor Asiah, Muhamad (2020) Transient Overvoltage Simulation in 500 kV Transmission Line Plan of Sarawak, Malaysia using PSCAD. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 9 (4). pp. 2481-2490. ISSN 2278-3075

Yau, Darrien Seng Mah and Putuhena, F.J. and Nor Azalina, Rosli (2014) Environmental Technology: Potential of Merging Road Pavement with Stormwater Detention. Journal of Applied Science & Process Engineering, 1 (1). ISSN 2289-7771

Yau Seng, Mah and Norazlina, Bateni and Rosmina, Ahmad Bustami and Jethro, Anak Henry Adam and Afdal Haziq, Mohammad Salehe (2021) Accommodating stormwater storage structure in the veranda of shop building. International Journal of Advanced Technology and Engineering Exploration, 8 (82). pp. 1208-1221. ISSN (Print) 2394-5443, (Online) 2394-7454

Yazid, Imran and Lulie, Melling and XhuanWong, Guan and Ryusuke, Hatano and Takashi, Inoue2 and Edward Baran, Aeries and Joo Goh, Kah and Mah, Yau Seng (2022) Long term dynamics of surface fluctuation in a peat swamp forest in Sarawak, Malaysia. Environmental Research Communications, 4 (041001). pp. 1-13. ISSN 2515-7620

Yee, Cia Yin and Lim, Lam Ghai and Lock, Serene Sow Mun and Norwahyu, Jusoh and Yiin, Chung Loong and Chin, Bridgid Lai Fui and Chan, Yi Herng and Loy, Adrian Chun Minh and Muhammad, Mubashir (2022) A systematic review of the molecular simulation of hybrid membranes for performance enhancements and contaminant removals. Chemosphere, 307 (135844). pp. 1-18. ISSN 0045-6535

Yee, Cia Yin and Lim, Lam Ghai and Sow Mun, Serene Lock and Norwahyu, Jusoh and Chung Loong, Yiin and Lai Fui, Bridgid Chin and Yi Herng, Chan and Chun Minh, Adrian Loy and Muhammad, Mubashir (2022) A systematic review of the molecular simulation of hybrid membranes for performance enhancements and contaminant removals. Chemosphere, 307 (Part 3). pp. 1-18. ISSN 0045-6535

Yee Yong, Lee (2022) EDITORIAL SCOPE – BUILDING AND CONSTRUCTION MANAGEMENT EDITION. JOURNAL OF CIVIL ENGINEERING, SCIENCE AND TECHNOLOGY, 13 (2). pp. 80-83. ISSN 2462-1382

Yee Yong, Lee and Ahmad Beng Hong, Kueh and Yeong Huei, Lee (2021) Thermal Performance of Structural Lightweight Concrete Composites for Potential Energy Saving. Crystals, 11 (461). pp. 1-15. ISSN 2073-4352

Yee Yong, Lee and Athilia, Abdullah and Sim Nee, Ting and Yeong Huei, Lee (2022) THE FEASIBILITY STUDY OF EVAPORATION COOLING USING POROUS MATERIALS. Journal of Sustainability Science and Management, 17 (6). pp. 38-51. ISSN 2672-7226

Yee Yong, Lee and Sim Nee, Ting (2022) EDITORIAL : EMPOWERING INDUSTRY AND TRANSFORMING SOCIETY TOWARDS SUSTAINABLE DEVELOPMENT. Journal of Sustainability Science and Management, 17 (6). pp. 1-2. ISSN 2672-7226

Yi, Herng Chan and Sow, Serene Mun Lock and Lai, Bridgid Fui Chin and Mee, Kee Wong and Chun, Adrian Minh Loy and Shin, Ying Foong and Yiin, Chung Loong and Su, Shiung Lam (2023) Progress in thermochemical co-processing of biomass and sludge for sustainable energy, value-added products and circular economy. Bioresource Technology. pp. 1-18. ISSN 0960-8524

Yi, Wen Kerk and Chin, Ying Teh and Tay, Kai Meng and Lim, Chee Peng (2021) Parametric Conditions for a Monotone TSK Fuzzy Inference System to be an n-Ary Aggregation Function. IEEE TRANSACTIONS ON FUZZY SYSTEMS, 29 (7). pp. 1864-1873. ISSN 1063-6706

Yi, Wen Kerk and Kai, Meng Tay and Chee, Peng Lim (2014) A New Interval-based Method for Handling Non-Monotonic Information. 2014 IEEE International Conference on Fuzzy Systems (FUZZ-IEEE).

Yi, Xuan Tang and Yeong, Huei Lee and Mugahed, Amran and Roman, Fediuk and Nikolai, Vatin and Beng, Ahmad Hong Kueh and Yee, Yong Lee (2022) Artificial Neural Network-Forecasted Compression Strength of Alkaline-Activated Slag Concretes. Sustainability, 14 (9). pp. 1-20. ISSN 2071-1050

Yiau, S.S. and F.J., Putuhena (2011) Probable Maximum Precipitation (PMP) Analysis for Bakun Dam Area. UNIMAS E-Journal of Civil Engineering, 2 (2).

Yigitcanlar, Tan and Afzan, Mohamed and Md., Kamruzzaman and Piracha, Awais (2019) Understanding transport-related social exclusion: a multidimensional approach. Urban Policy and Research, 37 (1). pp. 97-110.

Yiin, Chung Loong and Armando T., Quitain and Suzana, Yusup and Yoshimitsu, Uemura and Mitsuru, Sasaki and Tetsuya, Kida (2017) Choline chloride (ChCl) and monosodium glutamate (MSG)-based greensolvents from optimized cactus malic acid for biomass delignification. Bioresource Technology, 244 (1). pp. 941-948.

Yiin, Chung Loong and Chai, Yee Ho and Mustakimah, Mohamed and Cheng, Yoke Wang and Lai, Bridgid Fui Chin and Suzana, Yusup and Lam, Man Kee (2021) A review on potential of biohydrogen generation through waste decomposition technologies. Biomass Conversion and Biorefinery. pp. 1-26. ISSN 2190-6823

Yiin, Chung Loong and Lai, Zhi Ying and Bridgid Chin, Lai Fui and Serene Lock, Sow Mun and Cheah, Kin Wai and Martin J., Taylor and Amthal, Al-Gailani and Ben W., Kolosz and Chan, Yi Herng (2024) Green pathways for biomass transformation : A holistic evaluation of deep eutectic solvents (DESs) through life cycle and techno-economic assessment. Journal of Cleaner Production, 470. pp. 1-17. ISSN 1879-1786

Yiin, Chung Loong and Quitain, Armando T. and Suzana, Yusup and Uemura, Yoshimitsu and Sasaki, Mitsuru and Kida, Tetsuya (2018) Sustainable green pretreatment approach to biomass-to-energy conversionusing natural hydro-low-transition-temperature mixtures. Bioresource Technology, 261. pp. 361-369.

Yiin, Chung Loong and Suzana, Binti Yusup and Quitain, Armando T. and Mitsuru, Sasaki and Yoshimitsu, Uemura and Tetsuya, Kida (2016) Characterization of natural low transition temperature mixtures (LTTMs): Green solvents for biomass delignification. Bioresource Technology, 199. pp. 258-264. ISSN 0960-8524

Yiin, Chung Loong and Suzana, Yusup and Armando T., Quitain and Yoshimitsu, Uemura and Mitsuru, Sasaki and Tetsuya, Kida (2018) Life cycle assessment of oil palm empty fruit bunch delignification using natural malic acid‑based low‑transition‑temperature mixtures: a gate‑to‑gate case study. Clean Technologies and Environmental Policy, 20. pp. 1917-1928.

Yiin, Chung Loong and Suzana, Yusup and Armando T., Quitain and Yoshimitsu, Uemura and Mitsuru, Sasaki and Tetsuya, Kida (2018) Life cycle assessment of oil palm empty fruit bunch delignification using natural malic acid‑based low‑transition‑temperature mixtures: a gate‑to‑gate case study. Clean Technologies and Environmental Policy, 20. pp. 1917-1928.

Yiin, Chung Loong and Suzana, Yusup and Armando T., Quitain and Yoshimitsu, Uemura and Mitsuru, Sasaki and Tetsuya, Kida (2018) Thermogravimetric analysis and kinetic modeling of low-transition-temperature mixtures pretreated oil palm empty fruit bunch for possiblemaximum yield of pyrolysis oil. Bioresource Technology, 255. pp. 189-197.

Yiin, Chung Loong and Suzana, Yusup and Quitain, Armando T. and Uemura, Yoshimitsu and Sasaki, Mitsuru and Kida, Tetsuya (2018) Delignification kinetics of empty fruit bunch (EFB): a sustainable and green pretreatment approach using malic acid‑based solvents. Clean Techn Environ Policy, 20. pp. 1987-2000.

Yiin, Chung Loong and Suzana, Yusup and Yoshimitsu, Uemura (2014) Delignification of Empty Fruit Bunch (EFB) using Low Transition Temperature Mixtures (LTTMs) : A Review. Applied Mechanics and Materials, 625. pp. 741-744. ISSN 1662-7482

Yiin, Chung Loong and Syhui, Ho and Suzana, Yusup and Quitain, Armando T. and Yi, Herng Chan and Chun, Adrian Minh Loy and Yong, Ling Gwee (2019) Recovery of cellulose fibers from oil palm empty fruit bunch for pulp and paper using green delignification approach. Bioresource Technology, 290. pp. 1-5.

Yiin, Chung Loong and Yap, Kok Liang and Ku, Andrian Zi En and Chin, Bridgid Lai Fui and Lock, Serene Sow Mun and Cheah, Kin Wai and Loy, Adrian Chun Minh and Chan, Yi Herng (2021) Recent advances in green solvents for lignocellulosic biomass pretreatment : Potential of choline chloride (ChCl) based solvents. Bioresource Technology, 333. pp. 1-12. ISSN 0960-8524

Yong, L.K. and Law, P.L and Taib, S.N.L. and Mah, D.Y.S. and Johari, A.H. (2018) Refinement of Topographical Factor For Estimating Soil Loss and Sediment Yield in Equatorial Regions. Journal of Civil Engineering, Science and Technology, 9 (2). pp. 96-116. ISSN 2462-1382

Yong, L.K. and Law, P.L. and Siti Noor Linda, Taib and Ngu, J.O.K. and Mah, Yau Seng and Law, S.L.G. (2021) A Study on Topography Versus Sediment Yield Under Simulated Rainfall. IOP Conf. Series: Materials Science and Engineering, 1101 (012019). p. 10. ISSN 1757-899X

Yong, P.C and Razali, I. and Teo, DCL (2009) Utilisation of recycled aggregate as coarse aggregate in concrete. UNIMAS E-Journal of civil Engineering, 1 (1).

Yung, Agnes Weng Lee and Soh, Fong Lim and Chua, David Sing Ngie and Khairuddin, Sanaullah and Rubiyah, Baini and Mohammad Omar, Abdullah (2017) Adsorption Equilibrium for Heavy Metal Divalent Ions (Cu2+, Zn2+, and Cd2+) into Zirconium-Based Ferromagnetic Sorbent. Advances in Materials Science and Engineering, 2017. ISSN 1687-8434

Zamri, Bujang and Othman, Che Puan (2017) Simulation model of traffic operations on single carriageway roads: Model calibrationand validation. ARPN Journal of Engineering and Applied Sciences, 12 (4). pp. 945-950. ISSN 1819-6608

Zhang, Jia Jun and Christelle Wang, Pau Ping and Suresh, Sagadevan and Nurhidayatullaili, Muhd Julkapli and Lai, Sai Hin and Thomas Yang, Chung Kuang and Juan, Joon Ching (2024) Highly effective Cu doped SrTiO3 as a cathode driven by oxygen vacancies and redox of Ti4+/Ti3+ and Cu2+/Cu+ for rechargeable alkaline zinc batteries. Materials Chemistry and Physics, 311. ISSN 1879-3312

Zhi, Ying La and Yiin, Chung Loong and Sow, Serene Mun Lock and Lai, Bridgid Fui Chin and Nur Syuhada, Ahmad Zauzi and Sherena, Sar‑ee (2023) A review on natural based deep eutectic solvents (NADESs): fundamentals and potential applications in removing heavy metals from soil. Environmental Science and Pollution Research. pp. 1-28.

Zi, Sheng Lui and Mah, D.Y.S. and Fang, Yenn Teo (2019) Stormwater detention in road shoulder using stormpav green pavement system. International Journal of Civil Engineering and Technology (IJCIET), 10 (4). pp. 400-409. ISSN 0976-6316

Zubair, Khalid and N., Fisal and Rahat, Ullah and Hashim, Safdar and Wajaha, Maqbool and S., Zubaira and Adnan, Shahid Khan (2012) M2M Communication in Virtual Sensor Network for SHAAL. Jurnal Teknologi, 20. pp. 85-88. ISSN 2180–3722

Zunara, Bashir and Serene Lock, Sow Mun and Noor, e Hira and Suhaib, Umer Ilyas and Lam, Ghai Lim and Irene Lock, Sow Mei and Yiin, Chung Loong and Mehtab, Ali Darban (2024) A review on recent advances of cellulose acetate membranes for gas separation. RSC Advances, 14 (27). pp. 19560-19580. ISSN 2046-2069

azida, Rashidi and Abdul Azim, Abdullah and Mohammad Ibrahim Safawi, M. Z. and Noor Sheena Herayani, Harith (2023) Rectification of Sabah Stilt House Using Shear Wall Subjected to Earthquake. INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 15 (4(2023). pp. 338-346. ISSN 2229-838X

azida, Rashidi and Mohammad Ibrahim Safawi, M. Z. and Raudhah, Ahmadi (2021) Mix proportion for medium grade concrete with silica fume as cement replacement for general purpose construction. IOP Conf. Series: Materials Science and Engineering 1, 1101 (1). pp. 1-8. ISSN 1757-8981

Book

Wan Hashim, Wan Ibrahim and Siti Noor Linda, Taib and Norsuzailina, Mohamed Sutan and Raudhah, Ahmadi and Idawati, Ismail and Abdul Razak, Abdul Karim and Norazzlina, M.Sa'don and Azida, Rashidi and Teo, Delsye Ching Lee and Mohammad Ibrahim Safawi, Mohammad Zain and Mohd Raduan, Kabit and Ahmad Kueh, Beng Hong and Mohammad, Abdul Mannan and Chee Khoon, Ng and CHARLES HIN JOO, BONG and Darrien Yau Seng, Mah and Alsidqi, Hasan and Leonard Lik Pueh, Lim and Chuah, Kee Man and Freddy, Yeo Kuok San and Annisa, Binti Jamali and Helmy, Hazmi and Zayn Al-Abideen, Gregory, eds. (2022) CIVIL ENGINEERING, SCIENCE AND TECHNOLOGY CHALLENGES: GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING. Nil, nil (nil). UNIMAS Publisher, Universiti Malaysia Sarawak. ISBN 978-967-2298-94-6

Abu Zahrim, Yaser and Mohd Sani, Sarjadi and Junidah, Lamaming, eds. (2023) Cellulose : Development, Processing, and Applications. CRC PRESS, Boca Raton. ISBN 9781003358084 / 9781032414386

Md Rezaur, Rahman, ed. (2022) Fundamentals and Recent Advances in Nanocomposites Based on Polymers and Nanocellulose. Elsevier. ISBN 9780323857710

Lee, Yee Yong and Beng, Ahmad Hong Kueh and Ivy Tan, Ai Wei and Lee, Chin Kho and Dayang Nur Salmi Dharmiza, Awang Salleh and Lidyana, Roslan and Ting, Sim Nee, eds. (2021) Innovative Engineering and Technology III. Trans Tech Publications Ltd, Switzerland, Switzerland. ISBN 9783035718331

Abu Zahrim, Yaser and Habib Musa, Mohamad and Mazlina, Mamat and Mohd Amran, Madlan and Junidah, Lamaming (2021) Kejuruteraan Pengkomposan. Penerbit UMS, Kota Kinabalu. ISBN 9789672378046

Amir Azam, Khan and Magdalene, Anak Andrew Munot and Shirley, Anak Johnathan Tanjong and Rudiyanto, Bin Philman Jong and Hishammudin Afifi, Bin Huspi (2018) Gearing Towards a Greener Future. UNIMAS Publisher, Kota Samarahan, Sarawak. ISBN 9789672008552

Construction Research Institute of Malaysia, CIDB Malaysia (2015) Guidelines for Construction on Peat and Organic Soils in Malaysia. Construction Research Institute of Malaysia (CREAM), Kuala Lumpur, Malaysia. ISBN 978-967-0242-15-6

Faisal Amsyar, Redzuan and Ma, Chau Khun and Abdullah Zawawi, Awang and Shek, Poi Ngian (2021) Steel Straps Confined Lightweight Foamed Concrete. Penerbit UTM Press, Universiti Teknologi Malaysia. ISBN 978-983-52-1795-1

Ir Dr Mohd. Asbi, Othman and Prof. Emeritus Dato’ Dr Hj. Ismail, Hj. Bakar and Dato’ Ir Rohaizi, Mohd Jusoh and Ir Dr Zuhairi, Abd. Hamid and Tuan Zamri, Ramli and Ir Dr Toh, Cheng Teik and Ir Vincent Tang, Chok Khing and Ir Abdul Hadi, Abdul Aziz and Ir Dr Low, Tian Huat and Associate Prof. Ts Dr Adnan, Zainorabidin and Siti Noor Linda, Taib and Norazzlina, M.Sa'don and Ir Dr Vivi, Anggraini and Dr Youventharan, Duraisamy and Mohamed Fadzli, Rahman and Ir Chee, Sai Kim (2019) Guidelines For Construction on Peat and Organic Soils in Malaysia - Second Edition (2). Construction Research Institute of Malaysia (CREAM), CONSTRUCTION RESEARCH INSTITUTE OF MALAYSIA (CREAM), Kuala Lumpur. ISBN 978-967-0242-22-4

M.O, Abdullah (2012) Applied Energy: An Introduction. CRC Press .

Mah, D.Y.S. and Onni Suhaiza, Selaman (2012) Sarawak river barrages and environmental quality. Universiti Malaysia Sarawak, (UNIMAS). ISBN 978-967-5527-36-4

Mah Yau Seng, Darrien (2017) Individual lot on-site stormwater detention underneath residential car porch. Universiti Malaysia Sarawak (UNIMAS), Kota Samarahan. ISBN 978-967-2008-45-3

Mohammad, Abdul Mannan and R., Sathyanathan and U., Umamaheswari and Hemant S., Chore (2024) Emerging Trends in Composite Structures : Select Proceedings of ICC-IDEA 2023. Lecture Notes in Civil Engineering, 387 . Springer Nature Singapore Pte Ltd. ISBN 978-981-99-6175-7

Mohammad Omar, Abdullah (2012) Essential notes on applied energy : for mechanical and chemical engineering students (objective, practical short questions & sample answers). Universiti Malaysia Sarawak. ISBN 978-967-5527-15-9

Noor Hasyimah, Rosman and Inawati, Othman and Hasnida, Harun (2022) Wastewater Treatment : Aerobic Granular Sludge Technology. Penerbit UKM, Bangi, Selangor Darul Ehsan, Malaysia.

Norazzlina, M.Sa'don and Lim, Soh Fong and Syed Tarmizi, Bin Syed Shazali and Sharifah Masniah, Wan Masra and Dayangku Salma, Binti Awang Ismail and Abdul Razak, Abdul Karim and Ivy Tan, Ai Wei and Wan Hashim, Wan Ibrahim and Al-Khalid, Hj Othman (2012) Accreditation Handbook. UNIMAS Publisher, Universiti Malaysia Sarawak, 94300 Kota Samarahan, Sarawak, Malaysia.. ISBN 978-967-5527-28-9

Norazzlina, M.Sa'don and Lim, Soh Fong and Syed Tarmizi, Bin Syed Shazali and Sharifah Masniah, Wan Masra and Dygku Salma, Awg Ismail and Abdul Razak, Abdul Karim and Siti Nor Ain, Musa and Tan, Ivy Ai Wei and Wan Hashim, Wan Ibrahim and Al-Khalid, Hj Othman (2011) Accreditation Handbook. UNIMAS Publisher, Universiti Malaysia Sarawak, 94300 Kota Samarahan, Sarawak, Malaysia.. ISBN 978-967-5527-28-9

Norazzlina, M.Sa'don and Lim, Soh Fong and Syed Tarmizi, Syed Shazali and Sharifah Masniah, Wan Masra and Dayangku Salma, Binti Awang Ismail and Abdul Razak, Abdul Karim and Siti Nor Ain, Hj Musa and Ivy Tan, Ai Wei and Wan Hashim, Wan Ibrahim and Al Khalid, Othman (2012) Accreditation Handbook. UNIMAS Publisher, UniversitI Malaysia Sarawak. ISBN 978-967-5527-28-9

Norsuzailina, Mohamed Sutan (2022) CIVIL ENGINEERING, SCIENCE AND TECHNOLOGY CHALLENGES : STRUCTURAL ENGINEERING AND CONSTRUCTION MATERIALS. UNIMAS Publisher, Universiti Malaysia Sarawak. ISBN eISBN 978-967-2298-90-8

Norsuzailina, Mohamed Sutan (2017) Innovative Solutions for Engineering and Technology Challenges. UNIMAS Publisher, Universiti Malaysia Sarawak. ISBN ISBN 978-967-2008-36-1

Norsuzailina, Mohamed Sutan and Jethro, Anak Henry Adam and Abdul Razak, Abdul Karim and Norazzlina, M.Sa'don and Mah, D.Y.S. (2019) Manual of Open-Ended Laboratory (OEL). UNIMAS Publishe, Universiti Malaysia Sarawak, 94300 Kota Samarahan, Sarawak, Malaysia.. ISBN 978-967-2008-14-9

Norsuzailina, Sutan and Hendry Adam, Jethro and Abdul Razak, Abdul Karim and Norazzlina, M Saidon and Yau Seng, Mah (2017) Manual of Open-Ended Laboratory (OEL) : Faculty of Engineering. Universiti Malaysia Sarawak (UNIMAS), Kuching, Sarawak. ISBN 978-967-2008-14-9

Pender, M.J. and Wotherspoon, L. and Sa’don, N.M and Orense, R.P (2012) Macro element for pile-head cyclic lateral loading, Special Topics in Earthquake Geotechnical Engineering, Geotechnical. Geotechnical, Geological and Earthquake Engineering, 16 . SpringerLink. ISBN 978-94-007-2060-2 (online)

Rohana, Sapawi (2017) Radio Frequency Wideband CMOS Power Amplifiers Design and Analysis. Universiti Malaysia Sarawak (UNIMAS), Kuching, Sarawak. ISBN 978-967-2008-26-2

Tan, Ivy Ai Wei (2020) Biomass-Based Mesoporous Activated Carbon: Synthesis, Characterization and Optimization. UNIMAS Publisher, Universiti Malaysia Sarawak, Kota Samarahan, Sarawak. ISBN 978-967-2298-40-3

Book Chapter

A. M., Mukaddas and Farah Nora Aznieta, Abd Aziz and N.A., Mohd. Nasir and Norsuzailina, Mohamed Sutan (2022) WATER PERMEABILITY AND CHLORIDE AND SULPHATE RESISTANCE OF RUBBERISED FIBRE MORTAR. In: Civil Engineering, Science and Technology Challenges: Structural Engineering and Construction Materials. UNIMAS Publisher, pp. 302-314. ISBN 978-967-2298-90-8

Abdul Razak, Abdul Karim and Norazzlina, M. Sa'don and Muhammad Hafiz, Zainal Abidin and Siti Noor Atikah, Ihwan (2018) Verification of Design Equations for Ductile Failure Mode in Bolted Connections of Local Hardwoods. In: Innovation Technology Expo 2018 (InTEX 2018) Product Profile. Universiti Malaysia Sarawak, Pullman Hotel, Kuching, Sarawak., p. 33. ISBN 9789675418679

Abdul Razak, Abdul Karim and Norazzlina, M.Sa'don (2021) Transformative PdPc Approach in Civil Engineering Integrated Design Project for Enhancing Student Learning Experiences and Nurturing Future-Ready Graduates. In: 1st ONLINE TEACHING ENHANCEMENT AND LEARNING INNOVATION CARNIVAL (eTeLIC) BOOK SERIES : SYNCHRONOUS@REAL-TIME ONLINE INTERACTION. UMK Press, Universiti Malaysia Kelantan, Bachok, Kelantan, pp. 57-63. ISBN 978-967-2912-78-1

Abdul Razak, Abdul Karim and Norazzlina, M.Sa'don and Mahshuri, Yusof (2017) Modified Equations for Optimisation of Retrofitting Techniques in Masonry Buildings. In: InTEX17: Product Profile. Strengthening Research and Innovation for Communities Sustainability . Universiti Malaysia Sarawak (UNIMAS), Kota Samarahan. ISBN 978-967-5418-62-4

Abdul Razak, Abdul Karim and Norazzlina, M.Sa’don and Muhammad Na'imullah, Kamarul Ash'ari and Nursahira, Ibrahim and Xavier Langit, Ujan (2018) Verification of Design Equations for Brittle Failure Mode in Bolted Connections of Local Hardwoods. In: Innovation Technology Expo 2018 (InTEX 2018) Product Profile. Universiti Malaysia Sarawak, Pullman Hotel, Kuching, Sarawak, p. 33. ISBN 978-967-5418-67-9

Abdul Razak, Abdul Karim and Quenneville, Pierre and Norazzlina, M.Sa‘don and Ingham, Jason M. (2010) Assessing the Bolted Connection Strength of New Zealand Hardwood. In: New Zealand Society for Earthquake Engineering Conference (NZSEE 2010). New Zealand Society for Earthquake Engineering, pp. 1-9.

Abu Zahrim, Yaser and Junidah, Lamaming (2023) Wastewater as Nutrient Enhancer and Moisturizer for Compost Production : A Review. In: Cellulose: Development, Processing and Applications. CRC PRESS, Boca Raton, pp. 83-104. ISBN 9781032414386 (hbk) / ISBN: 9781003358084 (ebk)

Ade Syaheda Wani, Marzuki and Dayang Azra, Awang Mat and Dayang Nurkhairunnisa, Abang Zaidel and Kho, Lee Chin and Hoole, Paul RP (2020) Emerging Technologies for Future 5G/ 6G Wireless Communication Networks. In: Smart Antennas and Electromagnetic Signal Processing in Advanced Wireless Technology - with Artificial Intelligence Application and Coding. River Publishers Series in Communications . River Publishers, pp. 337-352. ISBN 9788770222068

Ahmad, Abdul Jalil and Fadhilah, Binti Md Fazil and Dayang Afiqah, binti Abang Mohamad Shibli and Joy Natalie, Cotter (2023) The Unresolved Design Issues in Malaysian Prefabricated Housing and Their Corrective Steps. In: Advances in Civil Engineering Materials : Selected Articles from the 6th International Conference on Architecture and Civil Engineering (ICACE 2022), August 2022, Kuala Lumpur, Malaysia. Lecture Notes in Civil Engineering, 310 . Springer, Singapore, pp. 453-464. ISBN 978-981-19-8024-4

Annisa, Jamali and Misman, Z.F.A. (2020) Food Waste Management : A Case Study on the Employment of Artificial Intelligence for Sorting Technique. In: Natural Food Products and Waste Recovery Healthy Foods, Nutrition Design, and Extraction of Valuable Compounds. Apple Academic Press, Inc., Florida (USA), pp. 1-27. ISBN 9781771889810

Borhan, M.M and Norsuzailina, Mohamed Sutan (2022) Laboratory study of water absorption of modified mortar. In: Civil Engineering, Science and Technology Challenges: Structural Engineering and Construction Materials. UNIMAS Publisher, pp. 42-47. ISBN 978-967-2298-90-8

Bridgid Lai Fui, Chin and Adrian Chun Minh, Loy and Kin Wai, Cheah and Yi Herng, Chan and Serene Sow Mun, Lock and Chung Loong, Yiin (2022) Graphene-based nanomaterials for CO2 capture and conversion. In: Nanomaterials for Carbon Dioxide Capture and Conversion Technologies. Elsevier Inc., pp. 211-243. ISBN 978-0-323-89851-5

Charles Hin Joo, Bong and S.C., Liew and M., Neging and E., Matthew Ruji and D., Gabda (2022) Statistical and Trend Analysis of Annual Maximum Daily Rainfall (AMDR) for Kuching City, Sarawak, Malaysia. In: Proceedings of the 5th International Conference on Water Resources (ICWR) – Volume 1 , Current Research in Water Resources, Coastal and Environment. Lecture Notes in Civil Engineering (293). Springer, Singapore, pp. 3-14. ISBN 978-981-19-5946-2

Cheah, Ryan Wei Jie and Tan, Cha Yao and Teo, Fang Yenn and Goh, Boon Hoe and Mah, Yau Seng (2021) A Review of Managing Water Resources in Malaysia with Big Data Approaches. In: Water Management and Sustainability in Asia. Community, Environment and Disaster Risk Management (23). Emerald Publishing, United Kingdom, pp. 141-148. ISBN 9781800711150

Chenhao, Zhou and Zhonghao, Chen and Mahmoud, Nasr and Ahmed I., Osman and Lai, Zhi Ying and Yiin, Chung Loong and Bridgid Chin, Lai Fui and Yap, Pow Seng (2024) Monitoring and Assessment Techniques for Microplastics. In: Microplastics in African and Asian Environments : The Influencers, Challenges, and Solutions. Emerging Contaminants and Associated Treatment Technologies (ECAT) . Springer Nature Switzerland AG, pp. 601-646. ISBN 978-3-031-64253-1

Chung, Jun Foo and Mohammad, Abdul Mannan (2022) Lightweight aggregate using Palm oil fuel ash and Fly ash. In: Futuristic Trends in Construction Materials & Civil Engineering,. Iterative International Publishers (IIP), pp. 49-71. ISBN 978-93-95632-98-0

Chung Loong, Yiin and Kok Liang, Yap and Dayang Salyani, Abang Mahmod and Bridgid Lai Fui, Chin and Serene Sow Mun, Lock and Yi Herng, Chan and Kin Wai, Cheah and Martin J., Taylor and Georgios, Kyriakoug (2022) Role of deep eutectic solvents as pretreatment medium for biomass transformation. In: Current Developments in Biotechnology and Bioengineering: Deep Eutectic Solvents: Fundamentals and Emerging Applications. Elsevier Inc, pp. 139-160. ISBN 978-0-323-99905-2

Emilliani, Geliga and Dayangku Salma, Awang Ismail (2022) GEOTECHNICAL PROPERTIES OF FLY ASH AND ITS APPLICATION ON SOFT SOIL STABILIZATION. In: CIVIL ENGINEERING, SCIENCE AND TECHNOLOGY CHALLENGES: GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING. UNIMAS Publisher, Kota Samarahan, Sarawak, pp. 26-31. ISBN e ISBN 978-967-2298-94-6

Fadilla 'Atyka, Nor Rashid and Nor Surayahani, Suriani and Mohr Norzali, Mohd and Mohd Razali, Tomari and Wan Nurshazwani, Wan Zakaria and Ain, Nazari (2019) Deep Convolutional Network Approach in Spike Train Analysis of Physiotherapy Movements. In: Advances in Electronics Engineering. Lecture Notes in Electrical Engineering, 619 . Springer, Singapore, Singapore, pp. 159-170. ISBN 978-981-15-1288-9

G.S., Gingos and Norsuzailina, Mohamed Sutan (2022) Effect of PFA on strength and water absorption of mortar. In: Civil Engineering, Science and Technology Challenges: Structural Engineering and Construction Materials. UNIMAS Publisher, pp. 37-41. ISBN 978-967-2298-90-8

G.T., Leong and C.H.J., Bong and F.Y., Teo and Aminuddin, Ab. Ghani (2021) SWMM Modelling of Automated Hydraulic Flushing Gate as a Flow Control Structure. In: Water Management and Sustainability in Asia. Community, Environment and Disaster Risk Management, 23 . emerald, pp. 77-86. ISBN 978-1-80071-115-0

Gaddafi, Ismaili and Badorul Hisham, Abu Bakar and Khairul Khuzaimah, Abdul Rahim (2022) Basic and Grade Stress for Some Timber in Sarawak. In: Civil Engineering, Science and Technology Challenges : Structural Engineering and Construction Materials. UNIMAS Publisher, pp. 84-87. ISBN 978-967-2298-90-8

Gaddafi, Ismaili and Badorul Hisham, Abu Bakar and Khairul Khuzaimah, Abdul Rahim (2022) The Behavior of Strength Properties from Three Different Tree Boles of Aras in Sarawak. In: Civil Engineering, Science and Technology Challenges : Structural Engineering and Construction Materials. UNIMAS Publisher, pp. 84-92. ISBN 978-967-2298-90-8

Gaddafi, Ismaili and Badorul Hisham, Abu Bakar and Khairul Khuzaimah, Abdul Rahim (2022) Evaluation of Acacia Mangium in Structural Size at Green Condition. In: Civil Engineering, Science and Technology Challenges : Structural Engineering and Construction Materials. UNIMAS Publisher, pp. 76-83. ISBN 978-967-2298-90-8

Hii, Siaw Weii and Chin, Lai Fui and Fanthagiro Rossi Stuard, Majing and Lim, Huei Yeong and Chung Loong, Yiin and Loy, Adrian Chun Minh and Suzana, Yusup and Quitain, Armando T. and Acda, Menandro N. and Elisabeth, Rianawati (2022) Iso-conversional kinetic and thermodynamic analysis of catalytic pyrolysis for palm oil wastes. In: Value-Chain of Biofuels : Fundamentals, Technology, and Standardization. Elsevier, United States, pp. 277-300. ISBN 978-0-12-824388-6

Ingham, Jason M. and Russell, Alistair P. and Abdul Razak, Abdul Karim and Oyarzo-Vera, Claudio (2008) Procedures for seismic assessment of unreinforced masonry buildings. In: M.J. Nigel Priestley Symposium. IUSS Press, Pavia, Italy, pp. 1-12. ISBN 978-88-6198-022-8

J.Z., Chong and Norsuzailina, Mohamed Sutan and Ibrahim, Yakub (2022) Characterization of early pozzolanic reaction of Calcium Hydroxide and Calcium Silicate Hydrate for Nanosilica modified cement paste. In: Civil engineering, science and technology structural engineering and construction materials. UNIMAS Publisher, UNIMAS, pp. 106-112. ISBN 978-967-2298-90-8

Jamali, Annisa and Mat Darus, I.Z. and Yatim, H.M and A. Talib, M. H. and Hadi, M.S and Tokhi, M.O. (2020) Intelligent Tuning of PID Controller for Double-Link Flexible Robotic Arm Manipulator by Artificial Bee Colony Algorithm. In: Sensor Networks and Signal Processing. Smart Innovation, Systems and Technologies, 176 . Springer, Singapore, Springer Nature Singapore Pte Ltd. 2021, pp. 533-547. ISBN 978-981-15-4917-5

Joristine Wong, Yun Tong and Nur Hasyimah, Hashim and Lee, Yeong Huei and Lee, Yee Yong (2024) CFD Analysis of Thermal Comfort Condition Inside Malaysian Traditional House. In: Proceedings of the 2023 International Conference on Green Building, Civil Engineering and Smart City. GBCESC 2023. Lecture Notes in Civil Engineering, 328 . Springer, Singapore, pp. 498-510. ISBN 978-981-99-9947-7

Karim, Abdul Razak Abdul and Quenneville, Pierre and M.Sa‘don, Norazzlina and Ingham, Jason (2013) Assessment Guidelines Of Wall-Diaphragm Connections For Masonry Buildings. In: Proceedings of the New Developments in Structural Engineering and Construction. New Developments in Structural Engineering and Construction, 2 . Research Publishing Services, pp. 1019-1024. ISBN 978-981-07-5354-2

Kipli, Kuryati and Latip, Aisya Amelia Abdul and Lias, Kasumawati and Bateni, Norazlina and Yusoff, Salmah Mohamad and Tajudin, Nurul Mirza Afiqah and Jalil, M. A. and Ray, Kanad and Shamim Kaiser, M. and Mahmud, Mufti (2022) GSR Signals Features Extraction for Emotion Recognition. In: Proceedings of Trends in Electronics and Health Informatics. Springer, Singapore, pp. 329-338. ISBN 978-981-16-8826-3

Kuok, Kuok King and Chan, Chiu Po and Md. Rezaur, Rahman and Khairul Anwar, Mohamad Said and Chin Mei, Yun (2024) Neural Network – A Black Box Model. In: Metaheuristic Algorithms and Neural Networks in Hydrology. Cambridge Scholars Publishing, pp. 1-34. ISBN 978-1-0364-0804-6

Leong, K. S. and Magreen, J. A. and Shyue Leong, Lee and Mohammad, Abdul Mannan (2022) Mix Design Of Polymer Concrete For Pothole Repair. In: Futuristic Trends in Construction Materials & Civil Engineering. Iterative International Publishers (IIP), USA & India, pp. 19-40. ISBN 978-93-95632-98-0

Mah, D.Y.S. and Salehe, A.H.M. and Putuhena, F.J. (2014) Water Sensitive Urban Design in Existing Urban Settings: Case Study of Dry Detention Pond in Kuching City. In: InCIEC 2013 Proceedings of the International Civil and Infrastructure Engineering Conference 2013. Springer Singapore, pp. 315-322. ISBN 978-981-4585-01-9

Md Rezaur, Rahman and Hamdan, Sinin and Siti Noor Linda, Taib and Rubiyah, Baini (2019) Optimization of Fabrication Technique to Prepare Acacia Wood Reinforced Bio-Composites. In: Acacia Wood Bio-composites. Springer International Publishing, pp. 49-102. ISBN 978-030-29627-8

Mohamed, J.S.Z and Norsuzailina, Mohamed Sutan (2022) MODIFIED CEMENT SYSTEM : DURABILITY AND AESTHETICS. In: Civil engineering, science and technology structural engineering and construction materials. UNIMAS Publisher, UNIMAS, pp. 1-5. ISBN 978-967-2298-90-8

N.M., Sa’don and M.J., Pender and A.R., Abdul Karim (2014) Dynamic Soil Stiffness Between WAK, SASW and SCPT Tests. In: InCIEC 2013 Proceedings of the International Civil and Infrastructure Engineering Conference 2013. Springer Singapore, pp. 461-475. ISBN 978-981-4585-01-9

Nafisa, Tamanna and Norsuzailina, Mohamed Sutan and Rabin, Tuladhar and Teo, Delsye Ching Lee and Ibrahim, Yakub (2022) POZZOLANIC PROPERTIES OF GLASS POWDER IN CEMENT PASTE. In: Civil engineering, science and technology structural engineering and construction materials. UNIMAS Publisher, UNIMAS, pp. 158-165. ISBN 978-967-2298-90-8

Nafisa, Tamanna and Norsuzailina, Mohamed Sutan and Rabin, Tuladhar and Teo, Delsye Ching Lee and Ibrahim, Yakub (2022) POZZOLANIC PROPERTIES OF GLASS POWDER IN CEMENT PASTE. In: Civil Engineering, Science and Technology Challenges: Structural Engineering and Construction Materials. UNIMAS Publisher, pp. 158-165. ISBN 978-967-2298-90-8

Neoh, C.A and Har, L.Y.K and Siti Farhanah, SM Johan and Tan, Poi Cheong (2024) Case histories of slope protection by HDPE Geocells. In: Geosynthetics for Effective Geo-Solutions in Malaysia: A Technical Compilation. Penerbit UTHM, pp. 155-166. ISBN 978-629-490-008-0

Nor Azalina, Rosli and Hamidi, Abdul Aziz and Leonard, Lim Lik Pueh and Inawati, Othman and Mohd Hafiz, Zawawi and Yung-Tse, Hung (2024) Management of Various Sources of Hazardous Waste. In: Waste Treatment in the Biotechnology, Agricultural and Food Industries. Handbook of Environmental Engineering, 2 (27). Springer, Switzerland, pp. 19-64. ISBN 9783031447679

Nor Azalina, Rosli and Hamidi, Abdul Aziz and Leonard Lim, Lik Pueh and Inawati, Othman and Mohd Hafiz, Zawawi and Hung, Yung Tse (2023) Management of Various Sources of Hazardous Waste. In: Waste Treatment in the Biotechnology, Agricultural and Food Industries. Handbook of Environmental Engineering, 2 (27). Springer Cham, Switzerland, pp. 19-64. ISBN 978-3-031-44767-9

Nor Azalina, Rosli and Hamidi, Abdul Aziz and Mohamad Razip, Selamat and Lim, Leonard Lik Pueh and Hung, Yung Tse (2022) Sewage Sludge Recycling and Disposal. In: Solid Waste Engineering and Management. Handbook of Environmental Engineering 24, 2 . Springer Nature, Switzerland, pp. 347-438. ISBN 978-3-030-89335-4

Noraida, Razali and Norazzlina, M.Sa'don and Abdul Razak, Abdul Karim (2022) STRENGTH AND DURABILITY EFFECT ON STABILIZED SUBGRADE SOIL. In: CIVIL ENGINEERING, SCIENCE AND TECHNOLOGY CHALLENGES: GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING. UNIMAS Publisher, Kota Samarahan, Sarawak, pp. 68-78. ISBN e ISBN 978-967-2298-94-6

Norazzlina, M. S'adon and Abdul Razak, Abdul Karim and Emilia Evyln, Christermaller and Mohamad Hanif, Mohamad Ariffin and Albert Akun, Merang (2018) Compressive Strength Development for Modified Peat using Rubber Crumb (RC) as Reinforcement with Electro-Kinetic Treatment (EKT). In: Innovation Technology Expo 2018 (InTEX 2018) Product Profile. Universiti Malaysia Sarawak, pp. 8-9. ISBN 978-967-5418-67-9

Norazzlina, M.Sa'don and Michael, John Pender and Abdul Razak, Abdul Karim (2014) Dynamic Soil Stiffness Between WAK, SASW and SCPT Tests. In: InCIEC 2013. Springer Science+Business Media Singapore, Singapore, pp. 461-475. ISBN 978-981-4585-01-9

Norazzlina, M.Sa’don and Abdul Razak, Abdul Karim and Emilia Evelyn, Christermaller and Mohamad Hanif, Mohamad Ariffin and Albert Akun, Merang (2018) Electro-Kinetic Treatment (EKT) on Reinforced Peat with Nylon Fiber for the Sub-grade Layer Strengthening. In: Innovation Technology Expo 2018 (InTEX 2018) Product Profile. Universiti Malaysia Sarawak, Pullman Hotel, Kuching, Sarawak, pp. 14-15. ISBN 978-967-5418-67-9

Nurakmal, Abdullah@ Goh Tuo Ho and Utaberta, Nangkula and Hassanpour, Badiossadat and Azami, Zaharim and Che-Ani, A. I. (2012) Criteria-Based Assessment and Grading in Architecture Design Studio. In: Advances in Intelligent and Soft Computing. Recent Researches in Educational Technologies . Springer, pp. 179-185. ISBN 978-1-61804-021-3

Ong, Ming Wei and Norsuzailina, Mohamed Sutan (2022) THE INFLUENCE OF FINELY GROUND MINERAL ADMIXTURE (FGMA) ON EFFLORESCENCE. In: Civil Engineering, Science and Technology Challenges: Structural Engineering and Construction Materials. UNIMAS Publisher, pp. 99-105. ISBN 978-967-2298-90-8

Pui, Tau Shien and Seneviratne, H. N. and Dayangku Salma, Awang Ismail (2022) A STUDY ON FACTORS INFLUENCING THE DETERMINATION OF MOISTURE CONTENT OF FIBROUS PEAT. In: CIVIL ENGINEERING, SCIENCE AND TECHNOLOGY CHALLENGES: GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING. UNIMAS Publisher, Kota Samarahan, Sarawak, pp. 50-58. ISBN e ISBN 978-967-2298-94-6

S.I., Balang and Norsuzailina, Mohamed Sutan and Ibrahim, Yakub and M.S., Jaafar and K.A., Matori (2022) INFLUENCE OF SILICA BASED WASTE MATERIALS ON THE MECHANICAL AND PHYSICAL PROPERTIES OF MORTAR. In: Civil Engineering, Science and Technology Challenges: Structural Engineering and Construction Materials. UNIMAS Publisher, pp. 120-125. ISBN 978-967-2298-90-8

Sai Hin, Lai and Chia Yu, Huat and Danial Jahed, Armaghani and Ehsan, Momani (2023) Application of artificial intelligence techniques for the verification of pile capacity at construction site: A review. In: Applications of Artificial Intelligence in Mining and Geotechnical Engineering. Elsevier, pp. 397-418. ISBN 9780443187650

Si Kiong, Lau and Norsuzailina, Mohamed Sutan (2022) INITIAL SURFACE ABSORPTION OF POZZOLAN AND POLYMER MODIFIED MORTAR. In: Civil engineering, science and technology structural engineering and construction materials. UNIMAS, UNIMAS, pp. 93-98. ISBN 978-967-2298-90-8

Simon, Beecham and Mostafa, Razzaghmanesh and Rosmina, Bustami and James, Ward (2019) The Role of Green Roofs and Living Walls as WSUD Approaches in a Dry Climate. In: Approaches to Water Sensitive Urban Design: Potential, Design, Ecological Health, Urban Greening, Economics, Policies, and Community Perceptions. Elsevier, Amsterdam, Netherlands; Cambridge MA, pp. 409-430. ISBN 978-012812843-5; 978-012812844-2

Simon, Beecham and Mostafa, Razzaghmanesh and Rosmina, Bustami and James, Ward (2019) The Role of Green Roofs and Living Walls as WSUD Approaches in a Dry Climate. In: Approaches to Water Sensitive Urban Design: Potential, Design, Ecological Health, Urban Greening, Economics, Policies, and Community Perceptions. Elsevier, Amsterdam, Netherlands; Cambridge MA, pp. 409-430. ISBN 978-012812843-5; 978-012812844-2

Siti Farhanah, SM Johan and Chan, Chee Ming (2024) Eficacy of non-woven geotextile as separator for drainage media sandwiching dredged marine clay. In: Geosynthetics for Effective Geo-Solutions in Malaysia. A Technical Compilation. Penerbit UTHM, pp. 79-96. ISBN 978-629-490-008-0

Siti Noor Linda, Taib and Kolay, Prabir K (2018) Physical and Geotechnical Properties of Tropical Peat and Its Stabilization. In: Physical and Geotechnical Properties of Tropical Peat and Its Stabilization. IntechOpen, pp. 93-105.

Tamanna, N. and Norsuzailina, Mohamed Sutan and Ibrahim, Yakub and Teo, Delsye Ching Lee (2022) STRENGTH CHARACTERISTICS OF MORTAR CONTAINING DIFFERENT SIZES GLASS POWDER. In: Civil Engineering, Science and Technology Challenges: Structural Engineering and Construction Materials. UNIMAS Publisher, pp. 113-119. ISBN 978-967-2298-90-8

Tu Anh, Vu Thanh and Kavitha, Vinjeandran (2021) Plant Based Plastic and Leather-Like Material. In: Wonders of Natural Products in Malaysia. UNIMAS Publisher, Kota Samarahan, Sarawak, Malaysia., pp. 57-59. ISBN 978-967-2298-82-3

Wen, Andy Law Kai and Chew, Jiuan Jing and Yiin, Chung Loong and Lock, Serene Sow Mun (2022) Thermal degradation behavior and kinetic modeling of green solvents-delignified biomass: a sustainable biomass-to-energy approach. In: Value-Chain of Biofuels : Fundamentals, Technology, and Standardization. Elsevier, United States, pp. 89-103. ISBN 978-0-12-824388-6

Wen, Andy Law Kai and Chew, Jiuan Jing and Yiin, Chung Loong and Lock, Serene Sow Mun (2022) Thermal degradation behavior and kinetic modeling of green solvents-delignified biomass: a sustainable biomass-to-energy approach. In: Value-Chain of Biofuels : Fundamentals, Technology, and Standardization. Elsevier, United States, pp. 89-103. ISBN 978-0-12-824388-6

Wong, Chuan Yuen and Teo, Fang Yenn and Goh, Boon Hoe and Mah, Yau Seng (2021) Simulating Rainwater Harvesting System Performance for a Campus University in Malaysia. In: Water Management and Sustainability in Asia. Community, Environment and Disaster Risk Management, 23 (23). Emerald Publishing, United Kingdom, pp. 125-131. ISBN 9781800711150

Final Year Project Report

ALLENE ALBANIA, LINUS (2018) EXPERIMENTAL STUDY OF CONTINUOUS ELECTROCOAGULATION TREATMENT OF PEAT WATER IN SARAWAK WITH ALUMINIUM ELECTRODE. [Final Year Project Report] (Unpublished)

Abang Ahmad Latif, Abang Sarbini (2023) OPTIMIZING HYBRID ELECTRIC VEHICLE ENERGY UTILIZATION BASED ON PARTICLE SWARM OPTIMIZATION ALGORITHM. [Final Year Project Report] (Unpublished)

Abang Ahmad Salemi, Abg Sulaiman. (2004) Experimental and finite element analysis to determine the strength of beverage can. [Final Year Project Report] (Unpublished)

Abang Mohamad Faizal, b. Abg. Abdul Ghapor (2001) Brickwall macromodelling using staad III. [Final Year Project Report] (Unpublished)

Abang Mohammad Nizam, Abang Kamaruddin (2006) Micro Hydro turbine (Design and fabrication). [Final Year Project Report] (Unpublished)

Abd. Rahman, Hashim. (2005) Experimental study on the mix proportions of high strength concrete. [Final Year Project Report] (Unpublished)

Abdul Gani, Haji Abd. Rahman. (2002) Relationship between surface finish and chips. [Final Year Project Report] (Unpublished)

Abdul Hadi, Bin Abdul Halik. (2009) Determination of optimum concentration of lime solution for soft soil stabilization. [Final Year Project Report] (Unpublished)

Abdul Hakim, Razali. (2009) Investigation on mechanical properties of coir fiber reinforced polypropylene composites. [Final Year Project Report] (Unpublished)

Abdul Razi, Bin Haji Kassim (2000) Design of a self-compacting concrete using local materials (Mix-Proportion). [Final Year Project Report] (Unpublished)

Abul Haziq, Ahmad Foaad (2008) Evaluation of shear strength of single lap joint. [Final Year Project Report] (Unpublished)

Ahmad Zuwairisyazwan, Bin Mohd Najib (2005) Validity study using energy - 10 software in a simple building. [Final Year Project Report] (Unpublished)

Ahong, Manchu (1998) Costing of establishment infrastructure - Celcom as a case study. [Final Year Project Report] (Unpublished)

Aida, Chan Hui Hui (2022) Isolation and Characterisation of Lipogenesis Inducing Factor in Enkabang (Shorea macrophylla). [Final Year Project Report] (Unpublished)

Aida Fathirah, Binti Mohd Faridz. (2017) Absorption behaviour of modified concrete using aluminium dross. [Final Year Project Report] (Unpublished)

Aida Khairina, Abdul Rahman (2023) SILICON-ON-INSULATOR (SOI) LARGE CROSS-SECTION RIB WAVEGUIDE (LCRW) FOR FIBER-TO-THE-HOME COUPLER DEVICES. [Final Year Project Report] (Unpublished)

Aishah Nur Dyana, binti Johari (2017) Secondary Consolidation Behaviour Of Samarahan Peat Soil. [Final Year Project Report] (Unpublished)

Alynah, Mail (2013) The Performance Of Water Filter Developed Using Commercial Activated Carbon Synthesized From Coconut Shell Remediating Low Quality Drinking Water At Rural Area. [Final Year Project Report] (Unpublished)

Amanda, anak Mangan. (2010) A case study of preloading in peat using finite element method with plaxis software. [Final Year Project Report] (Unpublished)

Amar Johan, Ishak (2020) Performance of perforated polymer concrete plate (PPCP) on wave energy attenuation. [Final Year Project Report] (Unpublished)

Ameer Umair, Abdul Talip (2020) Behaviour Of Hardness Properties Of Small Clear Laminated Acacia Hybrid Species Of Sarawak. [Final Year Project Report] (Unpublished)

Aminudin, Bin Abdul Kadir. (2009) Mechanical properties of jute and palm fiber reinforced hybrid polypropylene composites. [Final Year Project Report] (Unpublished)

Andreana Allyssa, Anak Henry (2017) Development of a laboratory model to study mechanics of slurry deposition subjected to temperature increase. [Final Year Project Report] (Unpublished)

Arlia Najeera, Binti Abdul Rahim. (2017) Application of geographic information system (GIS) in traffic signal operational system. [Final Year Project Report] (Unpublished)

Ashlah Nadhirah, Zulkifli (2020) Behaviour Of Compression Properties Of Small Clear Laminated Acacia Hybrid Species In Sarawak. [Final Year Project Report] (Unpublished)

Atirah, Abdul Majid (2022) Molecular Profiling of Shorea macrophylla with other closely related Shorea species. [Final Year Project Report] (Unpublished)

Au, Fuk Yaw. (2001) Design of structural elements for 5 storey residential 'class D/E' flat. [Final Year Project Report] (Unpublished)

Awang Firdaus, Bin Awang Aemeran (2010) Open channel flow through unsubmerged rigid vegetation. [Final Year Project Report] (Unpublished)

Awang Sadit, D.D (2005) The influence of limited parking availability and pricing on travel pattern to reduce traffic congestion. [Final Year Project Report] (Unpublished)

Awg Kamarudin, Bin Awg Japot. (2000) Design of load bearing brickwork systems. [Final Year Project Report] (Unpublished)

Azizah Ummira, Bt. Hj Abot (2010) Comparison of marshall mix properties between normal acw14 hot mix asphalt mixture and acw14 with carbide lime as filler replacement materia. [Final Year Project Report] (Unpublished)

Azmi, Bin Amat. (1999) Parametric study of flexural strengthening of RC beam using external reinforcement. [Final Year Project Report] (Unpublished)

BIANTI SHEANON, LOJITAN (2019) EFFECTS OF AGGREGATE CONCEPTS ON THE WORKABILITY OF PERVIOUS CONCRETE. [Final Year Project Report] (Unpublished)

Bajy @ Mohd Azlan, Bin Doimin. (2004) Creep crack growth testing of plastic. [Final Year Project Report] (Unpublished)

Bausah, A. (2006) Evaluation and analysis on existing sanitary landfill's liner and leachate collection systems. [Final Year Project Report] (Unpublished)

Beatrice, Anak No'eh (2010) Mobile satellite open space empirical data modeling. [Final Year Project Report] (Unpublished)

Beatrice, Bucking. (2017) Development of new generation of field vane shear test. [Final Year Project Report] (Unpublished)

Belinda Anak, Mason (2008) Investigation on the effect of different levels of peat sampling on oedometer test. [Final Year Project Report] (Unpublished)

Benjamin, Emin (2023) CONCRETE STRENGTH DETERMINATION USING MICROSTRIP PATCH ANTENNA VIA VECTOR NETWORK ANALYZER. [Final Year Project Report] (Unpublished)

Bong, C.H.J (2003) Study of flow in a non-symmetrical compound channel with rough flood plain. [Final Year Project Report] (Unpublished)

Bong, Mei Lun. (2010) Effect of compressive stress in concrete on ultrasonic pulse velocity with different aspect ratios. [Final Year Project Report] (Unpublished)

Bong, Yung Foo. (2006) The effectiveness of additional separate lanes as right turn and u-turn facility at signalized intersection on queue probability and delay. [Final Year Project Report] (Unpublished)

CALVIN, CLIFF (2019) COMPARATIVE STUDY ON PERFORMANCES AND PROPERTIES BETWEEN ORINARY PORTLAND COMENT (OPC) AND PORTLAND LIMESTONE CEMENT (PLC). [Final Year Project Report] (Unpublished)

CHEN, JIA CHERN (2019) FEASIBILITY STUDY ON THE COMBINATION MIX OF MICROTONOLITE AND LIMESTONE FOR SURGACE WEARING COURSE. [Final Year Project Report] (Unpublished)

CHING, LIOW VERN (2018) EFFECT OF BUFFER ANGLE FOR STORM FLOW REGULATOR IN CONTROLLING PEAK DISCHARGE. [Final Year Project Report] (Unpublished)

CHONG, KONG CHENG (2019) Site-Specific Ground Responses Analysis at Offshore of Bintulu, Sarawak. [Final Year Project Report] (Unpublished)

CHOO, CHEE YEAK (2022) ANALYSIS OF HYBRID SOLAR AND WIND POWER GENERATION SYSTEMS. [Final Year Project Report] (Unpublished)

CHUONG, CHIA YAN (2017) ENGINEERING PROPERTIES OF HANDRAIL USING LIGHTWEIGHT CONCRETE. [Final Year Project Report] (Unpublished)

Calvin, Wong Qin Jie (2023) MODELLING ANALYSIS FOR ACCURATE TROPICAL WEATHER FORECASTING. [Final Year Project Report] (Unpublished)

Catherine, Anak Alang. (2017) Numerical analysis of embankment on soft soil reinforced with stone column (PLAXIS 8.2 Software). [Final Year Project Report] (Unpublished)

Cathy Aqunia, Anak Roderick Sube. (2004) Experimental study on the effect of coarse aggregate type on mechanical properties of high strenght concrete. [Final Year Project Report] (Unpublished)

Chai, Mui Keak (2023) ANALYSIS OF THE GRID FOLLOWING OPERATION DURING FAULT CONDITION. [Final Year Project Report] (Unpublished)

Chai, Peng How. (2005) Ultrasonic pulse velocity (UPV) test on concrete under compression : a study on effect of aspect ratio. [Final Year Project Report] (Unpublished)

Chan, Kwok Kwang (2009) Investigation Into An Optimum Mix Proportion For Foamed Concrete With High Stability In Water. [Final Year Project Report] (Unpublished)

Chew, Meng Yew (2006) Deformation of wood in compression due to moisture content changes. [Final Year Project Report] (Unpublished)

Chia, F.J (2004) Ultrasonic pulse velocity (upv) in concrete under compression:a study on the effect of orientation of measurement. [Final Year Project Report] (Unpublished)

Chia, H.C (2009) Behavior of composite layered slab of eps concrete and normal concrete. [Final Year Project Report] (Unpublished)

Chieng, B.Y (2009) Greenhouse Gas Emissions From Tropical Peat Forest And Peat Oil Palm Plantation - A Review. [Final Year Project Report] (Unpublished)

Chieng, S.M (2003) Monitoring of a galvanized metal water tank at Unimas temporary campus by using acoustic emission: a case study. [Final Year Project Report] (Unpublished)

Chin, T.Y (2009) Flexural and time dependent behavior of palm shell aggregate concrete beam. [Final Year Project Report] (Unpublished)

Chong, C.T (2006) Determination of civil engineering construction time duration. [Final Year Project Report] (Unpublished)

Chong, Chai Ling (2020) Peat stabilization using combination of portland limestone cement, industrial wastes and chemical additives. [Final Year Project Report] (Unpublished)

Chong, Chooi Yeng. (2010) Effect of compressive stress in concrete on ultrasonic pulse velocity. [Final Year Project Report] (Unpublished)

Chong, Colin Ka Liang (2019) ELECTRICAL RESISTIVITY FOR HYDRATION OF SEDIMENTED GYPSUM SLURRY. [Final Year Project Report] (Unpublished)

Chong, G.S.C (2000) Design of a water distribution system for proposed BDC Housing Development Scheme at Block 8 Klauh Land district, Sri Aman Division. [Final Year Project Report] (Unpublished)

Chong, Huey Ching (2006) Experimental study on the properties of local coarse aggregate in Sarawak. [Final Year Project Report] (Unpublished)

Chong, Kah Weng. (2005) Modelling hourly runoff using ann for sg. Sarawak Kanan Basin. [Final Year Project Report] (Unpublished)

Chua, Chong Liang (2009) Modeling and controller design of a ball and beam system. [Final Year Project Report] (Unpublished)

Chua,, Mcfarlane Kang Wei (2009) Properties of polystyrene concrete bricks with sawdust ash. [Final Year Project Report] (Unpublished)

Chung, Eddie Chie Jin (2003) The effect of concrete grade in detecting internal defects of concrete by ultrasonic pulse velocity method. [Final Year Project Report] (Unpublished)

Chung, Jenn Chiu. (2002) 2 dimensional computer modelling on flow in hydraulic turbine generator cooler. [Final Year Project Report] (Unpublished)

Chung, Mui Zhi (2010) Development of ultra high strength concrete based on locally available materials and fly ash. [Final Year Project Report] (Unpublished)

Dakek, Ijen (2000) To investigate the possibility of threshing pepper spikes and removing of pepper skin by mechanical mean. [Final Year Project Report] (Unpublished)

Danggang, Harry (2000) Optimum fine and coarse aggregates proportions to produce strength of concrete. [Final Year Project Report] (Unpublished)

Dasilah, bt. Ibrahim (2008) Design of stabilizing foundation for one-storey office building on peat soil. [Final Year Project Report] (Unpublished)

Davidson Sating, Riang (2020) Behaviour of Cleavage Properties of Small Clear Laminated Acacia Hybrid Species of Sarawak. [Final Year Project Report] (Unpublished)

Dayang Diyana, Abang Bohari (2009) Finite element analysis in T-Joint pipe for brass and PVC. [Final Year Project Report] (Unpublished)

Dayang Izzatie, Binti Awg Dahlan (2017) Chemical stabilization of pretreated amorphous peat via cement and fly ash with lime. [Final Year Project Report] (Unpublished)

Dayang Lydiawati, Awang Jemat. (2006) Design and analysis beams for a four storey stell structure using csc software. [Final Year Project Report] (Unpublished)

Dayang Nazihah, Binti Abang Uthman. (2017) Regional rainfall frequency analysis for Samarahan river basin. [Final Year Project Report] (Unpublished)

Dayang Suhaila, Awang Suhaili (2006) Estimating Missing Precipitation to Optimize Parameters for Prediction of Daily Water Level Using Artificial Neural Network. [Final Year Project Report] (Unpublished)

Diana, Laja (2006) Solid waste treatment and disposal for rural area. [Final Year Project Report] (Unpublished)

Diana, Luke Embah (2004) Operational assessment of Sarawak river barrage and flood monitoring system. [Final Year Project Report] (Unpublished)

Dillah, D.N (2009) Effect of floor tiles on the behaviour of slabs. [Final Year Project Report] (Unpublished)

Dominic Anak, Winston Bale. (2006) Water piping and drainage system in a building. [Final Year Project Report] (Unpublished)

Dorothy, Chai Sin Yee (2005) Dispute resolution methods in the construction industry. [Final Year Project Report] (Unpublished)

Dunkcurn Niem A, Dakeh (2023) FUZZY TOPSIS BASED SOLAR PV DESIGN OPTIMIZATION. [Final Year Project Report] (Unpublished)

Dustine, Ibau Emang (2023) DEVELOPMENT OF SINGLE-PHASE TRANSFORMERLESS DC-AC INVERTER FOR PHOTOVOLTAIC SYSTEM. [Final Year Project Report] (Unpublished)

Dzufi Iszafawaty, Bt. Ispawi (2010) Parametric study of slope stability using plaxis software. [Final Year Project Report] (Unpublished)

ELLYNE, ENDUAT (2018) BEHAVIOURS OF ENGINEERING PROPERTIES OF ACACIA HYBRID UNDER COPPER CHROME ARSENIC (CCA) TREATMENT AT DIFFERENT AGE GROUPS. [Final Year Project Report] (Unpublished)

EMILIA EVYLN, CHRISTERMALLER (2018) COMPARISON OF UCS TEST WITH ELECTROKINETIC (EK) TREATMENT FOR STRENGTH DEVELOPMENT OF REINFORCED PEAT-POLYESTER FIBER. [Final Year Project Report] (Unpublished)

Engkoh, Brayan (2002) Bank sloughing and deposition at and near mouth of Sungai Bako. [Final Year Project Report] (Unpublished)

Ervin Rangga, Edwin (2019) Settlement analysis of chemically stabilized peat subgrade in road pavement. [Final Year Project Report] (Unpublished)

Eugene Chanel, Anak Jimbap. (2006) Design of a water reticulation system for proposed desa ilmu phase 15, 18 and 19 housing scheme at Samarahan Land district, Sarawak. [Final Year Project Report] (Unpublished)

Ewat, Pedo (2006) Development and performance tests of a sedimentation trap for silt and clay particles. [Final Year Project Report] (Unpublished)

FELICITY, UMANG JANANG (2018) CONSOLIDATION BEHAVIOUR OF AMORPHOUS PEAT AT KAMPUNG ENDAP, SAMARAHAN, SARAWAK. [Final Year Project Report] (Unpublished)

FONG, PAU HUA (2018) RECYCLE TYRE RUBBER AS FINE AGGREGATE IN HOT MIX ASPHALT (HMA). [Final Year Project Report] (Unpublished)

Faizal, Abd. Rahman (2004) Study on lighting in office buildings Kuching area. [Final Year Project Report] (Unpublished)

Farina, Unus (2006) Study on recycling programs in Kuching. [Final Year Project Report] (Unpublished)

Faris Nur, Bin Shuhaini (2017) Design high strength concrete by using Ultrafine POFA and fly ash as cement replacement. [Final Year Project Report] (Unpublished)

Fatini Izzati, Kip (2023) PHYSIOCHEMICAL AND ELECTRICAL PERFORMANCE OF KENAF FIBER AS INSULATING PRESSPAPER IMPREGNATED WITH MINERAL OIL. [Final Year Project Report] (Unpublished)

Fazlin, Abdul Azidi (2019) Thermal comfort assessment for Universiti Malaysia Sarawak (UNIMAS) community based on different building layouts. [Final Year Project Report] (Unpublished)

Fedelia, Anak Fedrick Ali (2017) Strength properties of hydrated gypsum powder. [Final Year Project Report] (Unpublished)

Fedilis Ann, Anak Dizer (2010) Analysis of critical factors affecting level of service at traffic light junction. [Final Year Project Report] (Unpublished)

Fong, A.W.Y (2005) Unified design approach for structural concrete based on eurocode 2. [Final Year Project Report] (Unpublished)

Foo, Swee Wen (2017) 3D modelling using solidworks : wall-mounted rainwater tank for stormwater detention in commercial areas. [Final Year Project Report] (Unpublished)

Foritis, Una (2020) Behavior Of Tensile Properties Of Small Clear Laminated Acacia Hybrid Species Of Sarawak. [Final Year Project Report] (Unpublished)

Franky, Ajie (2006) A comparison between eurocode 3 (1992) and British standard 5950 (2000) for flexural member design. [Final Year Project Report] (Unpublished)

Frezzal, Faisal. (2009) Designing swiftlet farming using energy plus. [Final Year Project Report] (Unpublished)

Gabriel Stotoh, Ak Gingos (2010) Absorption factor of mortar. [Final Year Project Report] (Unpublished)

Gaddafi, Ismaili (2005) Experimental study on the behaviour of shrinkage and compaction between peat and modified peat soil. [Final Year Project Report] (Unpublished)

Ghazali, Bin Ahmad (2010) Performance of profiled steel sheet dry board panel (PSSDB) against flexural and vibration. [Final Year Project Report] (Unpublished)

Goh, C.T (2009) Characteristics And Characterization Methodologies Of MSW At Source - A Review. [Final Year Project Report] (Unpublished)

Goh, H.C (2009) Concrete mix design using crushed pebble as replacement material in concrete mixture. [Final Year Project Report] (Unpublished)

Goh, H.W (2004) The study on milling machining for aluminium alloy. [Final Year Project Report] (Unpublished)

Goh, P.H (2009) Occupation safety and health in local and international standard forms of construction contract. [Final Year Project Report] (Unpublished)

Goh,, Chun Teck (2009) Characteristics and characterization methodologies of msw at source - a review. [Final Year Project Report] (Unpublished)

HUI, LAW SOON (2018) ENGINEERING PROPERTIES OF LIGHTWEIGHT SANDWICH WALL PANEL MADE WITH LIGHTWEIGHT CONCRETE. [Final Year Project Report] (Unpublished)

Hadiatul Aida, Adanan (2000) Project analysis on two low cost housing schemes in Sarawak (Modular method vs conventional method). [Final Year Project Report] (Unpublished)

Hafiz Fadillah, Alhadi (2004) Neural network for rainfall runoff modelling. [Final Year Project Report] (Unpublished)

Hamiza, Mohamad Salleh. (2006) Evaluation of sight distance at an intersection with stop sign control. [Final Year Project Report] (Unpublished)

Han, N.T.H (2010) Waste thermal heat pump. [Final Year Project Report] (Unpublished)

Hana Aifah, A.S Suhaili (1999) Parametric study of excavation with sheet pile by plaxis. [Final Year Project Report] (Unpublished)

Handy Priyo, Nurjuliyanto (2019) Geometrically non-linear time history elastic analysis for the performance based design of a prilling tower. [Final Year Project Report] (Unpublished)

Harold, Mamat (2010) Properties of foam concrete with expanded Polystyrene. [Final Year Project Report] (Unpublished)

Harun Din, Daud (2020) Assessment Of Subsurface Condition Of Peat Soil Due To Brackish Groundwater Seepage. [Final Year Project Report] (Unpublished)

Helmi, Mohamad Jamil. (2005) Experimental study on the factor affecting coagulation and flocculation. [Final Year Project Report] (Unpublished)

Henry Sidie, Sulang. (2005) The effect of road geometric (Gradient and curve) on friction value for interlocking concrete pavement. [Final Year Project Report] (Unpublished)

Ho, Kui Hua. (2010) Pavement mix design alternative use of waste product as filler material. [Final Year Project Report] (Unpublished)

Ho,, Chun Han. (2010) Standard form of construction contract :a study of the application of federation internationale des ingeieurs-conseils (FIDIC) in Malaysia. [Final Year Project Report] (Unpublished)

Hong,, Calvin Chiao Chun (2009) Hourly water level prediction of sungai bedup catchement using pre-developed ANNs model from Siniawan catchment. [Final Year Project Report] (Unpublished)

Howard, Vincent (2023) PEER-TO-PEER ROOFTOP PHOTOVOLTAIC ENERGY TRADING IN AN INDUSTRIAL PARK TO REDUCE GRID DEPENDENCY. [Final Year Project Report] (Unpublished)

Hu, W.K (2004) Comparative study of structural steel and reinforced concrete method : a project management case study. [Final Year Project Report] (Unpublished)

Hu, Wei Kiet. (2004) Comparative study of structural steeland reinforced concrete method : a project management case study. [Final Year Project Report] (Unpublished)

Intan Nurfauzirah Shafiqah, Binti Hamzani. (2017) Effect on compressibility of stabilized peat using fiber reinforcement (sawdust) techniques. [Final Year Project Report] (Unpublished)

Irawanddy, Bin Rosli (2001) A case study on a piling system for high rise building along Sarawak River. [Final Year Project Report] (Unpublished)

Isaruddin, Bin Morshidi. (2001) Parametric study of deep excavation using sage crisp software. [Final Year Project Report] (Unpublished)

Iwan, Bin Halmi (2009) Design wave nearshore using the application of linear wave theory. [Final Year Project Report] (Unpublished)

Izzian, Izzuddin. (2009) Sensitivity analysis of Malaysian highway capacity manual for unsignalised intersections. [Final Year Project Report] (Unpublished)

JENNYFER, JOYS JOHN (2020) STUDY ON CORRELATION OF DIFFERENT PEAT SOIL GEOTECHNICAL AND INDEX PROPERTIES. [Final Year Project Report] (Unpublished)

JORDAN ISAAC, ALISTAIR DING WAN (2023) LOW SPEED GENERATOR DESIGN FOR SMALL SCALE HYDROKINETIC TURBINE APPLICATION. [Final Year Project Report] (Unpublished)

Jeffrey, Ting Pik Lung (2023) Safety Helemt for Industrial Applications Design Using IOT. [Final Year Project Report] (Unpublished)

Jenny Kuihoon, Anak Kulu (2006) Application of infoworks modeling for flood mapping of Maong River. [Final Year Project Report] (Unpublished)

Jesper Hansen, Lawrence Jema-Ee (2009) A study on leaching characteristic of coal ash from landfills. [Final Year Project Report] (Unpublished)

Jessica Lansay, anak Andrew Abak (2002) Application of acoustic emission (EA) technique in various types of woods. [Final Year Project Report] (Unpublished)

Johin, Goko (2000) Optimum fine and coarse aggregates proportion to produce concrete strength. [Final Year Project Report] (Unpublished)

John Gary, J. (2009) Determination of spillway capacity of proposed bengoh dam. [Final Year Project Report] (Unpublished)

Jong, Ho Sing. (2010) Durability properties of recycled aggregate concrete. [Final Year Project Report] (Unpublished)

Julian, Gabriel Bain (2010) Effect of surcharge on stabilized peat soil from Sarawak. [Final Year Project Report] (Unpublished)

Julian Leslie, Anyie (2009) Development of temporal rainfall pattern for Sarawak. [Final Year Project Report] (Unpublished)

Jungan, F. (2000) An alternative wastewater treatment system for existing temporary UNIMAS campus. [Final Year Project Report] (Unpublished)

KHUZARINA, MARZUKI (2018) DESIGN OF HORIZONTAL SLOPE PIPE WITH DIFFERENT OPENING SIZES OF GEOTEXTILE. [Final Year Project Report] (Unpublished)

KOPET, EVELYN BLINDA (2002) Electromagnetic radiation concerning human health and environmental issues. [Final Year Project Report] (Unpublished)

Keli, H. (2006) A feasibility study on methods of construction over peat soils. [Final Year Project Report] (Unpublished)

Kenny Adams, Ajang. (2006) A study on silt and clay particles settling characterics in channels. [Final Year Project Report] (Unpublished)

Khairul Anwar, Zukiflee (2010) Creep and shrinkage deformation of frp sheet strengthened reinforced concrete beam. [Final Year Project Report] (Unpublished)

Khairul Khuzaimah, Abdul Rahim (2006) Study on collection and transportation of waste in Kota Samarahan. [Final Year Project Report] (Unpublished)

Kho, John Han Shyan (2009) Properties of polystyrene concrete bricks with silica fume. [Final Year Project Report] (Unpublished)

Kho, Kenneth Wee Hong (2010) Calcium carbide waste (CCW) as cement replacement in concrete. [Final Year Project Report] (Unpublished)

Kho, Wendy Choon Yen. (2010) Computer simulation of building for lateral loading using css software. [Final Year Project Report] (Unpublished)

Khoo, Kian Hua (2011) Design of CMOS power amplier. [Final Year Project Report] (Unpublished)

Kong, Wen Yee (2017) The effect of fibre cintent on water absorption and sorptivity of sago fibre reinforced concrete. [Final Year Project Report] (Unpublished)

LAW, JIN MING (2022) AUTONOMOUS POWER LINE INSPECTION USING COMPUTER VISION. [Final Year Project Report] (Unpublished)

Latif, Yok (2005) The polished stone value of local aggregates in Sarawak and its performance on skidding resistance. [Final Year Project Report] (Unpublished)

Lau, Sie Huang. (2010) Design of the micro hydro power reservoir at kpg semulong ulu. [Final Year Project Report] (Unpublished)

Law, Ing Nguong (1999) Channel roughness of earthen channel for tropical conditions. [Final Year Project Report] (Unpublished)

Lee, Cheng Yiew (2002) Cathodic protection of steel under different environment. [Final Year Project Report] (Unpublished)

Lee, Chin Hui (2000) Procedure for structural appraisal, repair and retrofitting of concrete structures. [Final Year Project Report] (Unpublished)

Lee, Daniel Kim Tee. (2003) Analytical study on simply supported rectangular slab with opening. [Final Year Project Report] (Unpublished)

Lee, Lin Jye (1998) A complex variable boundary element method (CVBEM) for solving seepage problems. [Final Year Project Report] (Unpublished)

Lee, Wei Ming (2001) Design of a raft foundation for a 5 storey flat. [Final Year Project Report] (Unpublished)

Liang, Kah Hoh (1998) Some geotechnical properties of tropical peat soils. [Final Year Project Report] (Unpublished)

Liew, Hon Choi (2010) Energy efficient electronic blind system for home windows. [Final Year Project Report] (Unpublished)

Liew, Yu Voon (2010) Long term deflection and cracking performance of palm shell aggregate concrete beam subjected to transverse loading. [Final Year Project Report] (Unpublished)

Liew,, Fui Fath (2006) Biomass conversions from agriculture waste; potiential of biomass resources in Sarawak. [Final Year Project Report] (Unpublished)

Lim, Gee Zhiong (2009) Behavior of composite slab consisting of foam concrete and normal concrete. [Final Year Project Report] (Unpublished)

Lim, Kwang Seng (2020) Experimental investigation on rheological properties of cemented silica fume paste for application of geotechnical engineering. [Final Year Project Report] (Unpublished)

Ling, John Heng Teck. (2017) Effect of strain rate on vane shear test. [Final Year Project Report] (Unpublished)

Loh, E.K (2009) Finite element analysis on pepper brick strength. [Final Year Project Report] (Unpublished)

Loh, Ling Ping (2006) Finite element analysis of seepage flow under a sheet pile. [Final Year Project Report] (Unpublished)

Loi,, Hie Ping. (2009) Investigation on the behavior of three dimensional steel building due to lateral loading using csc software. [Final Year Project Report] (Unpublished)

Loo, Soon Wah (2000) Comparison of flexural design between bs 8110 (1985) and aci 318 (1995). [Final Year Project Report] (Unpublished)

Low, Kah Yen (2020) Strength Enhancement of Stabilised Peat by using Cement, Ground Granulated Blast-Furnace Slag and Chemical Admixture as Additives. [Final Year Project Report] (Unpublished)

Lui Zi, Sheng (2019) 3D modelling of stormpav green pavement at road shoulder. [Final Year Project Report] (Unpublished)

Lydia Kristen, Binti Edward Mongudal (2005) Modelling of reinforced concrete beam for flexural behaviour. [Final Year Project Report] (Unpublished)

MAHATHIR, MOHD NOOR (2020) THE INVESTIGATION OF MECHANICAL AND PHYSICAL PROPERTIES OF GRANITE, LIMESTONE AND MICROTONALITE AGGREGATES. [Final Year Project Report] (Unpublished)

MALACHI, TING JIA JING (2020) SEISMIC PERFORMANCE OF MAJOR COMPONENTS IN CRITICAL SYSTEM OF SINAGAMA IRRADIATION PLANT, PENINSULAR MALAYSIA. [Final Year Project Report] (Unpublished)

MUHAMMAD HIFZHAN AMSYAR, ZULKIFLI (2015) PRODUCTION OF BIOGAS USING DAIRY MANURE AS FEEDSTOCK AND RUMEN FLUID AS INOCULUM. [Final Year Project Report] (Unpublished)

MUHAMMAD ‘IZZAT, ISHAK (2019) SEISMIC PERFORMANCE OF SHEAR WALL WITH DIFFERENT THICKNESS AND WIDTH FOR LOW RISE BUILDING. [Final Year Project Report] (Unpublished)

Madihi, A. (2006) Retrofit design on lighting system. [Final Year Project Report] (Unpublished)

Mah, Kar Weng (2010) Case Study: Design and Development of Pico Hydro Power System for Underserved Community in Kampung Semulong Ulu. [Final Year Project Report] (Unpublished)

Mah, Kar Weng (2010) Case study : design and development of pico hydro power system for underserved community in kampung semulong ulu. [Final Year Project Report] (Unpublished)

Mahathir, Merjedi (2005) Factors affecting the workability of concrete incorporating PFA. [Final Year Project Report] (Unpublished)

Maniyan, S/O Rama (2010) Leaching studies of pulverised fuel ash from local thermal power plant. [Final Year Project Report] (Unpublished)

Maqueline Cyndi, Anak Nap (2010) Parametric study of retaining wall using plaxis. [Final Year Project Report] (Unpublished)

Marlene Clarissa, Thomas Likup. (2006) Teamwork in civil engineering -past, present, and future. [Final Year Project Report] (Unpublished)

Md. Fazlul, Hasan (2019) Dualband microstrip antenna (2.4GHz & 5.8 GHz) with novel back transmission line feed technique. [Final Year Project Report] (Unpublished)

Mensan, Anak Gandai. (2005) Analysis of pile group. [Final Year Project Report] (Unpublished)

Michelle, Nashrin Bawai (2023) Predicting Chlorophyll Intensity Of Various Plants Using Improved Convolutional Neural Network. [Final Year Project Report] (Unpublished)

Mohamad, N. (2009) The use of pumping station in conjunction with Kuching barrage for flood mitigation. [Final Year Project Report] (Unpublished)

Mohamad Ayub, Ishak (2004) The roof technologies at low cost houses and the effect on thermal performance : structures. [Final Year Project Report] (Unpublished)

Mohamad Hezan Andy, Bin Mohamad Sait (2005) Optimum mix design for concrete incorporating PFA from Sejingkat power station, Kuching. [Final Year Project Report] (Unpublished)

Mohamad Luqman Hakim, Bin Hashim Mohd. (2017) Synchronized earthwork, erosion and sedimentation control plan for construction site. [Final Year Project Report] (Unpublished)

Mohamad Redza, Bin Ali Madan (2004) Testing of riveted cold-formed steel connections in bearing. [Final Year Project Report] (Unpublished)

Mohammad Azam, Bin Johari (2009) Compressibility behaviour of peat soil. [Final Year Project Report] (Unpublished)

Mohammad Ishamudin, Ismail (2006) Storm rainfall analysis for upper Rajang River Catchment. [Final Year Project Report] (Unpublished)

Mohammad Khalis Afham, Md Sahlan (2009) Management and disposal of clinical waste in Sarawak general hospital. [Final Year Project Report] (Unpublished)

Mohd Azkarmin, Mohd Adenan (2010) Development of temporal rainfall patterns for Sabah and Sarawak. [Final Year Project Report] (Unpublished)

Mohd Faiz Jafni, bin Ahmad Mustafa (2014) Basic strength properties of oncosperma tigillarium at small clear. [Final Year Project Report] (Unpublished)

Mohd Faris, Hardji (2023) Structural Damage Detection Using Deep Learning and Image Processing. [Final Year Project Report] (Unpublished)

Mohd Firdaus, Abdul Razak (2009) Analysis of ammoniacal nitrogen in Sungai Maong Kiri. [Final Year Project Report] (Unpublished)

Mohd Muhaimin Rafiq, bin Abas, (2012) Reka bentuk struktur basikal transit dalam mengaplikasikan laminasi venir serat buluh. [Final Year Project Report] (Unpublished)

Mohd Nidzam, Mohd Ali (2020) Behaviour Of Impact Bending Properties Of Small Clear Laminated Acacia Hybrid Species Of Sarawak Species Of Sarawak. [Final Year Project Report] (Unpublished)

Mohd Rizal, Abdul Hamid (1999) End effector and trajectory working area of robot system. [Final Year Project Report] (Unpublished)

Mohd Yusri, Bin Suratman (2009) Analysis of slope stability using finite element method. [Final Year Project Report] (Unpublished)

Mohd. Effendi, Bin Abdullah. (2005) Thermal comfort for office work with special reference to Kuching area. [Final Year Project Report] (Unpublished)

Moses, Sondoh (2004) Experimental study on the effect of fly ash on mechanical properties of high strenght concrete. [Final Year Project Report] (Unpublished)

Muhammad Aiman, Bin Mat Ghani (2017) Investigating the row shear failure of bolted connection in Selangan Batu wood. [Final Year Project Report] (Unpublished)

Muhammad Faqih, Bin Mohd Jaafar (2017) High strength of bricks made up of POFA and fly ash as cement replacement. [Final Year Project Report] (Unpublished)

Muhammad Ihsan, Zabidi (2020) The effectiveness of the perforated polymer concrete plate (PPCP) to trap sediment. [Final Year Project Report] (Unpublished)

Muhammad Sadli, Bin Abdllah. (2006) Planning analysis for inland navigation developing in the Baram river using logical framework approach. [Final Year Project Report] (Unpublished)

Muhammad Syafik, Jumali. (2004) Small scale structural defects using vibration monitoring technique. [Final Year Project Report] (Unpublished)

Musa, J. (2002) Application of acoustic emission (AE) technique in various materials (metal, woods and bricks). [Final Year Project Report] (Unpublished)

NIK ‘AMIRAH FARHANA, NIK AHMAD LUTFI (2015) OPTIMIZATION STUDY ON MATHEMATICAL MODEL OF CYMBOPOGON WINTERIANUS ESSENTIAL OIL EXTRACTION BY STEAM DISTILLATION. [Final Year Project Report] (Unpublished)

NORIMAH, AMAT SAILAN (2015) DESIGN STUDY OF MICROBIAL FUEL CELL USING PALM OIL MILL EFFLUENT AS A SUBSTRATE. [Final Year Project Report] (Unpublished)

NUR ARDILLA, SHAZALI (2019) DEVELOPMENT OF PROTOYPE WEB-BASED EDUCATIONAL SYSTEM ON LOW VOLUME RURAL ROAD DESIGN. [Final Year Project Report] (Unpublished)

NUR JASMIN, AZRI (2020) INVESTIGATION ON THE FLEXURAL BEHAVIOUR OF CFST BEAM WITH DIFFERENT CONFIGURATION OF STEEL PLATE REINFORCEMENTS. [Final Year Project Report] (Unpublished)

NURRIZZUWANNI, BINTI HAIRUDDIN (2018) ANALYSIS OF SPOT SPEED STUDIES AT KUCHING OUTER RING ROAD, KOTA SAMARAHAN : A CASE STUDY. [Final Year Project Report] (Unpublished)

Najwa, Binti Ismail. (2017) Behaviour of ground improvement techniques on embankment using plaxis 2D version 8.6. [Final Year Project Report] (Unpublished)

Natasya, Percival Fernandez (2017) APPLICATION OF ELECTRICAL RESISITIVITY METHOD TO DETERMINE EFFECTIVE STRESS DURING SLURRY DEPOSITION. [Final Year Project Report] (Unpublished)

Nayli Batrisyia, Nordin (2019) Seismic design response spectrum and soil liquefaction assessment for Tanjung Kidurong Power Plant, Bintulu, Sarawak. [Final Year Project Report] (Unpublished)

Ng, Suh Hong. (2002) Experimental investigation of the velocity distribution for a bendway weir. [Final Year Project Report] (Unpublished)

Ng, Wan Chi (2010) Development of ultra high strength concrete based on locally available materials and silica fume. [Final Year Project Report] (Unpublished)

Nirlawina, Binti Mohamad Lazim. (2000) Design of a water distribution system for Gedong Rural Growth Center. [Final Year Project Report] (Unpublished)

Noor Suraya, Romali. (2006) Organic soil stabilization by different types of admixtures. [Final Year Project Report] (Unpublished)

Nor Aini, Rosli (2004) Limestone : an alternative material for road base and subbase. [Final Year Project Report] (Unpublished)

Nor Intan Zaharah, Binti Ahmad Zaidi (2017) Compressibility properties of fully saturated gypsum. [Final Year Project Report] (Unpublished)

Noraini, Asakil (2006) Finite elements on bond strenght of adhesive / polymeric composites system. [Final Year Project Report] (Unpublished)

Noraizah, Binti Ugang. (2006) Development of photoelastic experiment. [Final Year Project Report] (Unpublished)

Norazlin, Binti Ahmad. (2004) Analysis of laterally loaded pile. [Final Year Project Report] (Unpublished)

Norazlina, Bateni. (2008) Nearshore wave analysis of Batu Pahat river estuary. [Final Year Project Report] (Unpublished)

Norhidayah, Mohamad Shafee (2015) PRODUCTION AND CHARACTERIZATION OF BIOCOAL FROM AGRICULTURAL BIOMASS USING MICROWAVE-INDUCED TORREFACTION. [Final Year Project Report] (Unpublished)

Noridham, Mohamad. (2005) Experimental study on the high strength concrete with different fine aggregate. [Final Year Project Report] (Unpublished)

Norikhsan, Bin Haji Anuar (2006) Experimental study of fluid flow in a double L-bend pipe with small nozzle outlets. [Final Year Project Report] (Unpublished)

Norsyathirah, Binti Mat Shoib (2017) Evaluating the bolted connection strength of Selangan Batu wood. [Final Year Project Report] (Unpublished)

Nuh Muizzuddin, Ahmad Fauzi. (2009) Properties of foam concrete with fixed percentage of expanded polystyrene. [Final Year Project Report] (Unpublished)

Nur Aliaa, Binti Mohamad (2017) Feasibility of measuring the undrained strength of peat in the direct shear box. [Final Year Project Report] (Unpublished)

Nur Hijjah Syazalina, Abdul Rahim (2019) Effect of aggregate system on pervious concrete. [Final Year Project Report] (Unpublished)

Nurashyikin, Pauzi. (2009) Properties of polystyrene concrete block with fly ash. [Final Year Project Report] (Unpublished)

Nurizatulsima, Binti Abdul Aziz. (2017) Durability study at different age groups of planted Acacia mangium superbulk species of Sarawak. [Final Year Project Report] (Unpublished)

Nurkhadizah, Binti Salleh (2017) Evaluating on properties of different grades bitumen using Strategic Highway Research Program (SHRP) test method. [Final Year Project Report] (Unpublished)

Nurul Fazilla, Binti Ahmadi. (2017) Proposed riverbank erosion protection of Sungai Bedengan. [Final Year Project Report] (Unpublished)

Nurul Nadzatul Farhana, Binti Abdul Halim (2017) Energy efficiency in Public Works Department (PWD) Samarahan Divisional building. [Final Year Project Report] (Unpublished)

Nurul Syafiqah, Hanapi (2020) Improvement Of Engineering Properties On Peat Soil In Sarawak By Using Silica Fume As Filler. [Final Year Project Report] (Unpublished)

Nurul Wahida, Azmi (2005) Effect of fine content on compaction characteristics of sand. [Final Year Project Report] (Unpublished)

Nurull Farah Dillah, Mohd Kashim (2019) The influence of strength eccentricity in displacement of one storey reinforced concrete building due to sequential earthquake. [Final Year Project Report] (Unpublished)

Nyemas Dewi Pramita, Binti Aie (2017) Chemical stabilization of amorphous peat via cement and fly ash with lime. [Final Year Project Report] (Unpublished)

Ong, Chee Zen (2005) Slope stability analysis. [Final Year Project Report] (Unpublished)

Ong, E.Y.Y (1999) Kasami sequences for spread spectrum communications. [Final Year Project Report] (Unpublished)

Ong, Khin Kiat. (2005) Daily rainfall runoff modeling using artificial neural network for sungai Sarawak Kanan upper catchment. [Final Year Project Report] (Unpublished)

Pang, Ching Ching (2005) The effectiveness of the performance appraisal system in department of civilaviation (DCA) Kuching, Sarawak. [Final Year Project Report]

Peter Bruwa, Ak Minah. (2004) Conceptual drainage improvement plans for the maong river catchment area. [Final Year Project Report] (Unpublished)

Phang, Hock Kim (2003) Study of flow characteristics in a non-symmetrical compound channel : smooth flood plain. [Final Year Project Report] (Unpublished)

Prakash a/l, Vijaya Kumar (2005) Water quality study on rivers in Sarawak. [Final Year Project Report] (Unpublished)

Priscillina Anak Petrus, @ Petrus Igat. (2006) Methods of construction of modern house emphasizing on building thermal performance. [Final Year Project Report] (Unpublished)

Pua, Jia Yunn (2017) The use of recycled aggregate and fly ash for the production of pervious concrete. [Final Year Project Report] (Unpublished)

Punitha, Subbramaniam (2010) Performance of real time traffic in the ethernet and wlan using tcp and udp protocols. [Final Year Project Report] (Unpublished)

Quay, W.K (2009) Quality provisions in standard forms of local and international construction contract. [Final Year Project Report] (Unpublished)

Rachel Rher, Anak Edwin (2017) Reducing sediments produced in horizontal slope drainage by using drain envelopes. [Final Year Project Report] (Unpublished)

Rafidah, Binti Ramli. (2017) Investigation of stabilized peat soil geomorphology via scanning electron microscopy. [Final Year Project Report] (Unpublished)

Ramli, M.R (2009) Geotechnical properties of peat soil. [Final Year Project Report] (Unpublished)

Ratman, Bin Naiman (2001) Comparison of excavation between sage crisp software and plaxis. [Final Year Project Report] (Unpublished)

Romilus, Petrus (2004) Effect of organic contents on the compaction and shear strength of soil. [Final Year Project Report] (Unpublished)

Roziana, Binti Che Musa (2010) Comparison of theoretical total electron content (TEC) during disturbance. [Final Year Project Report] (Unpublished)

SITI NOOR ATIKAH, IHWAN (2018) ASSESSING THE BOLTED CONNECTION STRENGTH OF DRYOBALANOPS. [Final Year Project Report] (Unpublished)

Sahari, Z.R (2006) Modeling of human technical factors interrelationship in maintaining civilalian aircraft safety. [Final Year Project Report] (Unpublished)

Samson (2010) Investigation of water infliltration effect on unsaturated soil slope. [Final Year Project Report] (Unpublished)

Sebeli, K. (2009) Optimum mix of foamed concrete by using different materials. [Final Year Project Report] (Unpublished)

Seri, A. (2004) A study on the existing physical environment of the proposed Sungai Batu Resort, Lundu. [Final Year Project Report] (Unpublished)

Sharifah Azmin, Wan Hossen. (2009) Sediment yield accumulation at reservoir (Batang Ai Dam). [Final Year Project Report] (Unpublished)

Shif Rizal, bin Abd. Malik (2002) The usage of system dynamics simulation software to model shop floor operations. [Final Year Project Report] (Unpublished)

Siaw, Yang Yew (2020) Impact Behaviour Of Bio-Inspired Sandwich Beam With Varying Core Geometries. [Final Year Project Report] (Unpublished)

Sie, Hie Ing (2004) Parametric study on the load bearing capacity of lightweight steel framing system. [Final Year Project Report] (Unpublished)

Siti Fauziah, bt Samsudin (2000) Brickwork testing on locally produced cement sand brick-laboratory testing. [Final Year Project Report] (Unpublished)

Siti Salmiah, Bt Ayub (2009) Ergonomics study of tablet arm chair in tutorial room engineering faculty. [Final Year Project Report] (Unpublished)

Siti Zaleha, Kamaluddin (2009) Prediction of wave propagation, wind wave effects and energy dissipation nearshore of sungai Sarawak estuary. [Final Year Project Report] (Unpublished)

Siti Zarini Binti, Mohamed Jizi (2009) Modified cement system :durability and aesthetic. [Final Year Project Report] (Unpublished)

Sitihanafiah, Binti Ruasin (2006) Design of a single storey using steel structural elements. [Final Year Project Report] (Unpublished)

Sri Rumi Melanos, Bin Basri (2005) The effect of different pitch of the roof for ventilation. [Final Year Project Report] (Unpublished)

Stephen Law, T.M (2009) Water Demand Forecasting Using Artificial Neural Network For Housing Estate-Case Study. [Final Year Project Report] (Unpublished)

Su, Kenneth Swee Kwang (2009) Durability Consideration Of Expanded Polystyrene (EPS) Concrete. [Final Year Project Report] (Unpublished)

Su, M.C.H (2010) Prospect of biodiesel production from waste oil and fat in Malaysia. [Final Year Project Report] (Unpublished)

Suhaida, Binti Sulong (2004) The influence of speed tables on urban arterial road : a case study in Padungan street, Kuching city. [Final Year Project Report] (Unpublished)

Suhaila, Bt. Mahamod (2010) Modelling of the operations of flood diversion barrage during dry season. [Final Year Project Report] (Unpublished)

Suriani, Binti Mohamad Kameri. (2004) The competition of public transport : implementation of new bus using stated preference technique. [Final Year Project Report] (Unpublished)

Syed Almunir, Bin Mohd Zarak (2009) Solid Waste Generation And Composition In UNIMAS Cafeterias. [Final Year Project Report] (Unpublished)

Tan, Chan Boon (2002) Structural design of a reinforced concrete floating pontoon with an access walkway. [Final Year Project Report] (Unpublished)

Tan, Choon Hong. (2017) Compressive strength, splitting tensile strength and water absorption of sago fibre reinforced concrete. [Final Year Project Report] (Unpublished)

Tan, Juin Hwee (2020) Impact Behaviours of Bio-Inspired Sandwich Beam under Continuous Impacts. [Final Year Project Report] (Unpublished)

Tan, K.E (2009) Durability consideration of foamed concrete. [Final Year Project Report] (Unpublished)

Tan, Kok Chuan (2010) Evaluation of bitumen modified properties by adding up carbide lime as an addictive material. [Final Year Project Report] (Unpublished)

Tan, Kok Kui (1999) Reinforced concrete beam design by mathcad based on BS8110. [Final Year Project Report] (Unpublished)

Tay, Guan Heng (1999) Design of a water supply system for Sarawak National Youth Training Institute. [Final Year Project Report] (Unpublished)

Teh, T.K (2009) Durability of epoxy concrete under Malaysian atmosphere. [Final Year Project Report] (Unpublished)

Teo,, Wee Chai (2009) A study on suitable habitat for swiftlet farming. [Final Year Project Report] (Unpublished)

Terence, Jerome Daim. (2006) Mini service provider. [Final Year Project Report] (Unpublished)

Tey, N.W (2009) Improvement design of solar chimney. [Final Year Project Report] (Unpublished)

Thian, Bui Fat (2013) Decision support system for order promise and order delivery. [Final Year Project Report] (Unpublished)

Timmy, Jupiter. (2009) Properties of expoxy concrete. [Final Year Project Report] (Unpublished)

Ting, Aik Seng (2020) Experimental Investigation on Rheological Properties of Silica Fume Cement Paste and Its Potential Application in Geotechnical Engineering. [Final Year Project Report] (Unpublished)

Ting, Ing Ing. (2003) Environmental impact assesment study of a proposed housing development project. [Final Year Project Report] (Unpublished)

Tiong, Alex Mee Kuei (2000) Shear strength of reinforced concrete beams strengthened with external reinforcement. [Final Year Project Report] (Unpublished)

Tsen, S.F (2006) Analisis of the process for traditional general contracting in Sarawak Malaysia. [Final Year Project Report] (Unpublished)

Tsen, Soo Fui. (2006) Analisis of the tender process for traditional general contracting in Sarawak Malaysia. [Final Year Project Report] (Unpublished)

VALERIE, THIEN LY CHING (2020) EVALUATION OF POTENTIAL GROUNDWATER RECHARGE AT KEDAMAIAN BASIN, KOTA BELUD, SABAH. [Final Year Project Report] (Unpublished)

VENESSA, AJON (2020) UNCONFINED COMPRESSIVE STRENGTH OF CEMENT STABILIZED PEAT WITH RUBBER CHIPS AND SAND FILLER MIXED AT VARIOUS WATER TO ADDITIVE RATIO. [Final Year Project Report] (Unpublished)

VONG, PIK QUAN (2018) EFFICIENCY OF VARIOUS PERFORATED PIPE CONFIGURATION IN SLOPE DRAINAGE SYSTEM. [Final Year Project Report] (Unpublished)

VONG, PIK QUAN (2018) EFFICIENCY OF VARIOUS PERFORATED PIPE CONFIGURATION IN SLOPE DRAINAGE SYSTEM. [Final Year Project Report] (Unpublished)

Voon, Peter (2010) Comparison of parallel prefix adder (PPA). [Final Year Project Report] (Unpublished)

Voon, Siaw Chee (2001) Analysis and design of structural elements for a 5-storey flat. [Final Year Project Report] (Unpublished)

Walter, Y.L (2008) Proposed Rainwater Direct Storage for Faculty of Engineering In UNIMAS. [Final Year Project Report] (Unpublished)

Wan Ahmad, W.A.A (2008) Compression bending test for pvc pipe. [Final Year Project Report] (Unpublished)

Wan Ahmad, W.F (2009) Extreme rainfall patterns for sg. Sarawak and Samarahan river basins. [Final Year Project Report] (Unpublished)

Wan Hairul Azhar, Bin Wan Husein. (2000) The evolution of core house case area : Taman sukma Rancangan Perumahan Rakyat Siol Kanan. [Final Year Project Report] (Unpublished)

Wilmi, Anak Nyokiew (2006) The investigation into quantifying optimum viscosity of scc mix design. [Final Year Project Report] (Unpublished)

Wong, Ka Wai (2020) Comparison Structural Design Codes Between Bs 8110 And Ec 2. [Final Year Project Report] (Unpublished)

Wong, Kiew Chin (2010) Diesel - saline water separation by coalescence plate. [Final Year Project Report] (Unpublished)

Wong, L.G (2009) Characteristics of laminated flooring materials. [Final Year Project Report] (Unpublished)

Wong, Leong Sing. (2004) The effectiveness of 3 types of physical traffic calming device : which is most relevant at reducing traffic speeds. [Final Year Project Report] (Unpublished)

Wong, Ngie Bing (2004) Assessment of hydraulic systems for coastal wetland development in Asajaya, Kota Samarahan. [Final Year Project Report] (Unpublished)

Wong, Sia Siang (2017) The effect of fibre content on the split tensile strength of sago fibre reinforced concrete. [Final Year Project Report] (Unpublished)

Wong, Sie Kwong (2003) Flexural resistance in rectangular concrete beam with maximum tension reinforcement. [Final Year Project Report] (Unpublished)

Wong,, Kristy (2006) A baseline study on the impact of hazel for air polution mitigation. [Final Year Project Report] (Unpublished)

YII, Kelvin Seng Hua (2019) EXPERIMENTAL INVESTIGATION ON CBR PERFORMANCE FOR REINFORCED PEAT – NYLON FIBRE WITH SILICA FUME AS ADDITIVE FOR SUBGRADE SOIL. [Final Year Project Report] (Unpublished)

Yean, Tan Chun (2020) Impact Resistance Efficiency of Bio-inspired Composite Sandwich Beam with Different Core Materials. [Final Year Project Report] (Unpublished)

Yeo, C.C (2010) Mechanical testing on welded pipes. [Final Year Project Report] (Unpublished)

Yeong,, Choong Li (2009) Study of replacement of sand using foam concrete. [Final Year Project Report] (Unpublished)

Yogetasri, A/P Jeyapalan (2010) Preparation and characterization of zirconium based magnetic particles. [Final Year Project Report] (Unpublished)

Yong, K.S (2004) An analytica study of sand drain. [Final Year Project Report] (Unpublished)

Yong, Shirley Xiao Wei (2010) Artificial neural network (ANN) modeling & validation to predict compression index of tropical soft soil. [Final Year Project Report] (Unpublished)

Yu, Guan Sing. (2001) Alumminium welding and it's effect on changing of mechanical properties of the base metal. [Final Year Project Report] (Unpublished)

Yusuf, Bin Haji Mortadha (2000) Advances in concrete technology : a state of art report on high performance concrete. [Final Year Project Report] (Unpublished)

Yvonne, Lynn Walter. (2009) Proposed rainwater direct sotrage for faculty of engineering in UNIMAS. [Final Year Project Report] (Unpublished)

ZONG, LAU YING (2018) STRUCTURAL PERFORMANCE OF GROUTING USING POLYMER CONCRETE. [Final Year Project Report] (Unpublished)

Zualkafli, M.I.A (2009) Flexural and long term behavior of reinforced concrete beam. [Final Year Project Report] (Unpublished)

Zuhailah, Taib (2005) Evaluation of rating curves for some gauging stations in Sarawak. [Final Year Project Report] (Unpublished)

Zulhatta bin, Marzoki (2004) The roof technologies at low cost houses and the effect on thermal performance : materials. [Final Year Project Report] (Unpublished)

Zulkifli, Ahamad (2005) Compressibility and shear strength behaviour of peat soil in Sarawak. [Final Year Project Report] (Unpublished)

‘Aini ‘Afiyah, Gas @ Mohammad Hafiz (2023) SMART AIR-CONDITIONER CONTROLLER FOR EFFECTIVE ENERGY AND COST MANAGEMENT. [Final Year Project Report] (Unpublished)

Magazine and Newsletter

Kasumawati, Lias and Siti Noor Linda, Taib and Ervina, Junaidi and Hani Hazwani, Perlis and Brenda Leong, Pei Yen (2023) ELITE Magazine : The IEM-SAFE UNIMAS Student Section 2021-2022, 2nd Edition. [Magazine and Newsletter]

Kasumawati, Lias and Siti Noor Linda, Taib and Ervina, Junaidi and Hani Hazwani, Perlis and Brenda Leong Pei, Yen (2023) ELITE Magazine 2.0. [Magazine and Newsletter]

Muhammad Syukri Imran, Abdullah and Siti Aisyah, Sapiee and Dzatul Ithri, Amran (2024) Virtual Environment Imaging Technology Enhances Maintenance of Biomedical Assets. [Magazine and Newsletter]

Universiti Malaysia Sarawak, Faculty of Engineering (2008) Embracing “OBE” in Engineering Education, Vol. 2 (2007/2008). [Magazine and Newsletter]

Universiti Malaysia Sarawak, Faculty of Engineering (2007) FENG Research Bulletin - Vol.1 Oct. 2007. [Magazine and Newsletter]

Universiti Malaysia Sarawak, Faculty of Engineering (2008) FENG Research Bulletin – volume 2 : November 2008. [Magazine and Newsletter]

Manual

Aziz, Tuah (2018) Garis Panduan Audit Akreditasi : Bidang Kejuruteraan dan Senibina. [Manual] (Unpublished)

Kasumawati, Lias and Hazrul, Mohamad Basri and Annisa, Jamali and Abang Mohammad Nizam, Abang Kamaruddin and Siti Kudnie, Sahari (2023) MANUAL PENGGUNA MESIN SESAR UNJUR MENGGUNAKAN SISTEM SOLAR PV. [Manual]

Newspaper Cutting

Berita, Harian (2012) UNIMAS terima geran RM350,000. [Newspaper Cutting] (In Press)

Berita Harian (2013) Sukar laksana projek pembangunan. [Newspaper Cutting] (In Press)

Bernama (2013) Unimas Research Centre Can Meet Score's Needs For More Engineers, 03 July 2013. [Newspaper Cutting] (In Press)

New Sarawak Tribune (2013) UNIMAS holds engineering week 2013. [Newspaper Cutting] (In Press)

New Sarawak Tribune (2013) UNIMAS to organize Engineering Conference. [Newspaper Cutting] (In Press)

New Sarawak Tribune, . (2013) Came up with mini hydro proposals, researchers, engineers urged. [Newspaper Cutting] (In Press)

New Sarawak Tribune, . (2019) Digital makerspace to aid STEM learning process - NSwkT. [Newspaper Cutting] (In Press)

The Star (2013) A feather in the cap. [Newspaper Cutting] (In Press)

The Star, Sarawak (2013) International Engineering Conference in July. [Newspaper Cutting] (In Press)

Utusan Borneo (2013) UNIMAS anjurkan Persidangan Kejuruteraan Antarabangsa. [Newspaper Cutting] (In Press)

Utusan Malaysia (2013) UNIMAS menang dua gelaran juara dalam Simposium Kejuruteraan. [Newspaper Cutting] (In Press)

Utusan Sarawak (2013) UNIMAS ngelancharka Program Minggu Injiner. [Newspaper Cutting] (In Press)

Utusan Sarawak (1997) UNIMAS bantu lahirkan banyak jurutera. [Newspaper Cutting] (In Press)

Picture

Universiti Malaysia Sarawak, Faculty of Engineering (2000) Discussion to improve soil lab, 2000. [Picture] (Unpublished)

Proceeding

A., Atmowidjojo and E., Rianawati and Chin, Bridgid Lai Fui and S., Yusup and A T, Quitain and S, Assabumrungrat and Yiin, Chung Loong and W, Kiatkittipong and A, Srifa and A, Eiad-u (2021) Supporting Clean Energy in the ASEAN : Policy Opportunities from Sustainable Aviation Fuels Initiatives in Indonesia and Malaysia. In: 2nd International Symposium of Earth, Energy, Environmental Science and Sustainable Development (JEESD 2021), 25th-26th September 2021, Jakarta, Indonesia.

A. Oyarzo-Vera, Claudio and Abdul Razak, Abdul Karim and Nawawi, Chouw (2009) Modal testing of an unreinforced masonry house. In: 3rd International Operational Modal Analysis Conference, IOMAC 2009, 4 May 2009 through 6 May 2009, Portonovo; Italy.

A.T., Rozman and W.R.A., Jiram and M.S.A., Rahman and A., Ismail and N.A., Azmi (2022) A systematic review of studies examining the relationship between resilience and physical asset management for water system. In: 6th International Conference on Civil and Environmental Engineering for Sustainability, 15-16 November 2021, Online.

Abdul Razak, Abdul Karim and Oyarzo-Vera, Claudio and Norazzlina, M.Sa'don and Ingham, Jason M. (2009) Effect of Plywood Retrofit on Dynamic Response of URM House subjected to Forced Vibration. In: Conference New Zealand Society for Earthquake Engineering, Jan 2009, Christchurch, New Zealand.

Abdul Razak, Abdul Karim and Oyarzo-Vera, Claudio and Norazzlina, M.Sa’don and Ingham, Jason M. (2008) Forced-Vibration Response of Small Scale URM House with Flexible Timber Diaphragm. In: Australian Earthquake Engineering Conference AEES 2008, 21-23 Nov 08, Ballarat, Victoria.

Abdul Razak, Abdul Karim and Quenneville, Pierre and Norazzlina, M.Sa'don and Ingham, Jason M. (2011) Wall-Diaphragm Connection Assessment Guidelines for URM Buildings. In: the Ninth Pacific Conference on Earthquake Engineering (PCEE 2011), April 14-16, 2011, Auckland, New Zealand.

Abdul Razak, Abdul Karim and Quenneville, Pierre and Norazzlina, M.Sa‘don (2021) Shear failure of the Meraka hardwood in bolted connections loaded parallel to the timber grain. In: The 13th International UNIMAS Engineering Conference 2020 (ENCON 2020), 27-28 October 2020, Kuching, Malaysia.

Abdul Razak, Abdul Karim and Quenneville, Pierre and Norazzlina, M.Sa‘don and Ingham, Jason M. (2009) Strength Assessment of Typical Wall-Diaphragm Connections in New Zealand URM Buildings. In: 11thCanadian Masonry Symposium, May 31-June 3, 2009, Toronto, Ontario.

Afrasyab, Khan and Spiridonov, Evgeny and Podzerko, Alexander and Darya, Khabarova and Mohammed, Zwawi and Mohammed, Algarni and Bahadar, Ali and Sanaullah, Khairuddin and Felemban, Bassem F. and Ullah, Atta and Andrew Ragai, Henry Rigit (2020) Numerical and experimental estimation of void fraction of supersonic steam jet in sub-cooled water: a comparative study. In: 2020 International Conference on Dynamics and Vibroacoustics of Machines (DVM), 16-18 Sept. 2020, Samara, Russia, Russia.

Ahmad Beng Hong, Kueh and Isabel Lim, Fong (2023) Tensegrity prediction of E. coli deactivation by sonication strategy. In: International Conference on Applied Science, Engineering, and Advanced Technology (EAW-ICASEAT2023), 24/12/2023, Bayview Beach Resort, Batu Ferringhi, Penang, Malaysia.

Ahmad Kueh, Beng Hong (2023) Sonication frequency of E. coli inactivation employing tensegrity approach. In: The International Conference on Mathematical Methods and Models in Biosciences (ICMMMB-23), 29/05/2023, Tokyo, Japan.

Ahmed, Musse Mohamud (2010) New Supervisory Control and Data Acquisition (SCADA) Based Fault Isolation System for Low Voltage Distribution Systems. In: International Conference on Computer and Communication Engineering (ICCCE 2010), 11-13 May 2010, Kuala Lumpur, Malaysia.

Ahmed, Musse Mohamud and Ismail, Hassan and Norhamimi, Hamdan (2003) New Concepts of Optimizing Unit Commitment and Economic Load Dispatch Costs in Large Scale Bower Systems. In: Student Conference on Research and Development: Networking the Future Mind in Convergence Technology, SCOReD 2003 Proceedings, Putrajaya, Malaysia.

Ahmed, Musse Mohamud and Soo, Lian (2013) Novel Automated Fault Isolation System on Low Voltage Distribution Automation System. In: 2013 UKSim 15th International Conference on Computer Modelling and Simulation, 10-12 April 2013, Cambridge, UK.

Ahmed Mohamed, Ahmed Haidar and Lai, Carmen and Muttaqi, Kashem M. (2021) A Market Framework for Energy Bidding Decision Making Strategy to provide a Competitive Mechanism in the Context of Deregulated Electricity Market. In: 2021 IEEE 4th International Conference on Computing, Power and Communication Technologies (GUCON), Sep 24-26, 2021, University of Malaya, Kuala Lumpur, Malaysia.

Annisa, Jamali and Aida Suriana, Abdul Razak and Shahrol, Mohamaddan (2024) An In-depth Study of Ankle-Foot Orthosis Dynamics Modeling: Leveraging Non-Parametric Approach Via Artificial Neural Networks. In: International Conference on Smart Instrumentation, Measurement and Application., 17-18 Oct 2023, Tamu Hotel, KL.

Annisa, Jamali and M. A., Zulkifli and M. N., Leman and Shahrol, Mohamaddan and Helmy, Hazmi (2024) Optimizing PID-Based Controller Utilizing Hybrid Evolutionary Algorithmn in Electric Motor-Driven Exoskeletons for Therapeutic Locomotion of Stroke Patients. In: 2024 IEEE 10th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA), 30-31 July 2024, Bandung, Indonesia.

Annisa, Jamali and Muhammad Asif, Zulkifli and M. N,, Leman and Shahrol, Mohamaddan and Helmy, Hazmi (2024) Assessment of Wearable Lower Limb Rehabilitation Robot Dynamics: A Study on ROM Training Performance. In: 9th International Conference on Smart Instrumentation, Measurement and Application., 17-18 Oct 2023, Tamu Hotel, KL.

April Ling Kwang, Chee and Bridgid Lai Fui, Chin and Shaharin Anwar, Sulaiman and Chai, Yee Ho and Agus, Saptoro and Hadiza Aminu, Umar and Lam, Man Kee and Yiin, Chung Loong (2023) Preliminary study for catalytic gasification of water hyacinth for syngas production. In: International Conference on Sustainable Processes and Clean Energy Transition 2022 (ICSuPCET), 1 – 2 December 2022., Kuching, Sarawak, Malaysia.

Ashley Edward Roy, Soosay and Muhammad Hamdi, Mahmood and Khairul Fikri, Tamrin and Narayanan, Kulathuramaiyer (2023) TRIZ-Based Approach in Remodeling Invasive Glucometer. In: International TRIZ Future Conference, September 12–14, 2023, Offenburg, Germany.

Bong Hin Joo, Charles and Richard, J. (2018) Monitoring Drought Using the Standardized Precipitation Index (SPI) in Sarawak River Basin. In: 4th International Conference on Water Resources (ICWR-2018), 27-28 November 2018, Bayview Hotel, Langkawi.

C., O’Beirne and Christophe, Gaudin and Phil, Watson and Mark, Randolph and Fauzan, Sahdi (2022) Riser-seabed interaction in the touchdown zone using fibre optic sensing in a geotechnical centrifuge. In: 10th International Conference on Physical Modelling in Geotechnics 2022 (ICPMG2022), 19-23 September 2022, Daejeon, Korea, South Korea.

Chan, Chee Ming and Siti Farhanah, SM Johan (2016) Performance enhancement of railtrack ballast with rubber inclusions: a laboratory simulation. In: 15th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, ARC 2015: New Innovations and Sustainability, 9th - 13th November 2015, Fukuoka International Congress Center.

Chee, K.N and Wong, J.W.J (2004) Risk of shear failure in RC Beams strengthened in Flexure via external prestressing. In: The 3rd International Conference on Advances in structural Engineering & Mechanism (ASEM), 2-4 September 2004.

Deanne, anak Edwin and Shafrida, binti Sahrani and Kismet, anak Hong Ping (2018) Efficiency of scattering algorithm with overset grid generation for detection of buried object. In: Microwave Conference (APMC), 2017 IEEE Asia Pacific, 13-16 Nov. 2017, Kuala Lumpar, Malaysia ..

Ehsan, Ahmed (2011) Performance of profiled steel sheet dry board system under flexural bending and vibration. In: UNSPECIFIED.

Faculty of, Engineering (2001) Proceedings of the Sixth Geotechnical Engineering Conference (GEOTROPIKA 2001). In: Geotechnical Engineering Conference , 2001.

Fauzan, Sahdi and Joe G., Tom and Noor, Laham and Phil, Watson and Fraser, Bransby and Christophe, Gaudin (2020) Measurements of long-term strength changes due to cyclic loading in Gulf of Mexico clay. In: 6th International Conference on Geotechnical and Geophysical Site Characterization (ISC2020), 7-11 September 2020, Budapest, Hungary.

Gaddafi, Ismaili and Taksiah, A. Majid (2019) Establishment an empirical relationship equation of magnitude conversion specific for Malaysia. In: 4th National Engineering Conference Awam’07, 29-31 Mei 2007, Langkawi, Kedah.

Hissyam, Hazmi and Idawati, Ismail and Annisa, Jamali and Mohamad Nazim, Jambli (2022) Data Analysis of Fly Ash Geopolymer Compressive Strength Using Machine Learning Method. In: The 4th ASEAN Australian Engineering Congress (AAEC2022), 12-14 July 2022, Kuching, Sarawak, Malaysia.

Hojati, A.T and Fereirra, L. and Charles, P. and Kabit, M.R (2011) An Analysis of Traffic Incidents on an Australian Urban Road Network. In: Australasian Transport Research Forum 2011 Proceedings, 28-30 September 2011.

Ismail, I. and Provis, J.L. and Deventer, J.S.J and Sinin, Hamdan (2012) Chloride diffusion and pore structure in geopolymers. In: Second International Conference on Microstructural-related Durability of Cementitious Composites, 11-13 April 2012, Amsterdam, The Netherlands.

Jin Sian, Lim and Cha Yao, Tan and Yau Seng, Mah and Min Lee, Lee and Fang Yenn, Teo (2022) Numerical modelling of urban stormwater management with grassed road divider as bio-retention system. In: 2nd International Conference on Civil and Environmental Engineering (ICCEE 2022), 6 & 7 January 2022, Virtual Conference (Organized by UTAR).

Kabit, M.R and Charles, P. and Fereirra, L. and Hojati, A.T (2011) Examination of Traffic Incident Records and Development of a Rapid Incident Response Plan. In: Australasian Transport Research Forum 2011 Proceedings, 28-30 September 2011.

Kiang Hwee, Tan (2003) Proceedings : Engineering and technology conference 2003 (EnTech 2003). In: Engineering and technology conference 2003 (EnTech 2003), 30th July 2003 - 1st August 2003. (Unpublished)

Lee, Yee Yong and Ikqmal Azmi, Muhd Syaznie Ikqmal Azmi1 and Lee, Yeong Huei (2020) A study on the challenges of implementing green building concept in Sarawak, Malaysia. In: 2nd International Conference on Materials Technology and Energy, 6-8 November 2019, Curtin University Miri Campus.

Leng, Zhi Yang and Shafishuhaza, Sahlan and Mohd Amri, Md Yunus and Annisa, Jamali (2024) Automated Dual-axis Solar Tracking System Using Fuzzy Logic Control. In: 9th International Conference on Smart Instrumentation, Measurement and Application., 17-18 Oct 2023, Tamu Hotel, KL.

M.J., Pender and T.B, Algie and N.M, Sa’don and R.P, Orense (2011) Snap-Back Testing for Estimation of Nonlinear Behaviour of Shallow and Pile Foundations. In: Proceedings of the Ninth Pacific Conference on Earthquake Engineering Building an Earthquake-Resilient Society, 14-16 April, 2011.

May, Raksmey and Muhamad Fuad, Bin Shukor and Kong, Sitha (2019) Assessment of Groundwater Abstraction for Factories in Klang, Selangor. In: 2019 International UNIMAS STEM 12th Engineering Conference (EnCon), 28-29 August, 2019, Riverside Majestic Hotel.

May, Raksmey and Siti Aishah, Sahul Hamid (2018) Physical Modeling Approach for Assessing the Effect of Climate Change on Groundwater at Coastal Area. In: International UNIMAS STEM EnCon2018, 12-14 September, 2018, Riverside Majestic Hotel.

Mohamed Abdelmoneim, Shaaban Mohamed and Nazreen, Junaidi and Md Pauzi, Abdullah (2020) Blockchain Technologies in Electric Energy Systems. In: 8th IEEE International Conference on Power and Energy (PECon) 2020, 7-8 December 2020, Penang, Malaysia.

Mohammad, Abdul Mannan and Ng, C. H. and Ideris, Zakaria and Narayanan, Sambu P. and Kurian, V. J. (2007) Engineering Properties of Oil Palm Shell (OPS) Hybrid Concrete for Lightweight Precast Floor Slab. In: International Conference on Sustainable Construction Materials and Technologies, 11-13 Jun 2007, Coventry University, Coventry, England..

Mohammad, Abdul Mannan and Teo, Delsye Ching Lee and Kurian, V. J. (2006) Structural behaviour of singly reinforced OPS beams. In: Proceedings of the 6th Asia-Pacific Structural Engineering and Construction Conference (APSEC 2006), 5 – 6 September 2006, Kuala Lumpur, Malaysia.

Mohammad Omar, Abdullah (2019) Applied Energy with Cleaner Environment and Smarter Schemes towards Industry 4.0. In: The International Conference on Innovative Applied Energy (IAPE’19), 14-15 March, 2019, Oxford, United Kingdom.

Mohd Fareez Edzuan, Abdullah and Sim Shu, Zhing and Clarence Bilong, Bugik (2016) Biodiesel unsaturation degree effects on diesel engine NOx emissions and cotton wick flame temperature. In: 2nd International Conference on Automotive Innovation and Green Vehicle AiGEV 2016, 2 August 2016 through 3 August 2016, Malaysia Automotive Institute (MAI) Cyberjaya, Selangor; Malaysia.

Musse, Mohamud Ahmed and Soo, W. L. (2012) Development of Novel Distribution Automation System (DAS) on Customer Side Distribution System. In: Proceedings of the IEEE Power Engineering Society Transmission and Distribution Conference, 7-10 May 2012, Orlando, FL, USA.

Mustapha Amine, Sadi and Annisa, Jamali and Abang Mohammad Nizam, Abang Kamaruddin (2024) Enhancing Quadrotor UAV Efficiency Amidst Turbulent Winds in Mangrove Area : A Hybrid PID-Grey Wolf Optimizer Control Approach. In: 9th IEEE International Conference On Smart Instrumentation, Measurement and Application, 17-18 Oct 2023, Tamu Hotel, KL.

N R, Yusuf and S, Yusup and Chung Loong, Yiin and P J, Ratri and A A, Halim and N A, Razak (2021) Prediction of solvation properties of low transition temperature mixtures (LTTMs) using COSMO-RS and NMR approach. In: 32nd Symposium of Malaysian Chemical Engineers (SOMChE2021), 15th-16th July 2021, Kuching, Sarawak.

Ng, CK (2005) Flexural strengthening of RC beams via external prestressing. In: International Conference on Concrete repair, Rehabilitation & Retrofitting, 21-23 November 2005.

Ng, CK and Wong, W.J and Marini, L. (2006) Finite section analysis of RC Beams prestressed with external tendons at ultimate limit state. In: -.

Norazzlina, M.Sa'don and Abdul Razak, Abdul Karim and Siti Noor Linda, Taib and Mahshuri, Yusof (2017) Strength properties of reinforced peat using fiber- polyesterand shredded rubber-crumb as reinforcement material. In: UNIMAS Silver Jubilee Conference 2017, 18-20 October 2017, Pullman Hotel, Kuching.

Norazzlina, M.Sa'don and Anas, Ibrahim and Orense, R.P and Pender, M.J. (2010) Initial Shear Modulus of Auckland Residual Soil From Field and Laboratory Tests. In: 7th International Conference on Urban Earthquake Engineering (7CUEE) & 5th International Conference on Earthquake Engineering (5ICEE), 3 Mar 2010 - 5 April 2009, Tokyo Institute of Technology, Tokyo.

Norazzlina, M.Sa'don and Pender, M.J. and Abdul Razak, Abdul Karim (2009) A macro-element for pile head response to cyclic lateral loading. In: 2009 New Zealand Society for Earthquake Engineering (NZSEE) Conference, 3 April 2009 - 5 April 2009, Christchurch, New Zealand.

Norazzlina, M.Sa‘don and Abdul Razak, Abdul Karim and S.N.L., Taib and Edward, Anak Muol and Ling, Benson Jin Yaw and Angela, Ee (2021) Sri Aman peat: Settlement observation and geotechnical properties investigation. In: The 13th International UNIMAS Engineering Conference 2020 (ENCON 2020), 27th - 28th October 2020, Kuching, Malaysia.

Norazzlina, M.Sa‘don and Pender, M.J. and Orense, R.P and Abdul Razak, Abdul Karim (2008) Lateral Dynamic Response of a Single Pile Model. In: Australian Earthquake Engineering Conference AEES 2008,, 21 Nov 2008 -23 Nov 2008, Ballarat, Victoria Australia.

Norazzlina, M.Sa’don and Pender, M.J. and Orense, R.P and Abdul Razak, Abdul Karim (2010) Dynamic Field Tests of Single Piles. In: 2010 New Zealand Society for Earthquake Engineering (NZSEE), 26 Mar 2010 - 28 Mar 2010, Wellington, New Zealand.

Nur Aida Suraya, A Razak and Hamizan, Sharbini and Chiu, Po Chan and Noor Hazlini, Borhan and Cheah, Wai Shiang (2024) ClassEscape : The Conceptual Design of Crowd Modeling in Fire Evacuation Simulation. In: 2024 IEEE Symposium on Wireless Technology & Applications (ISWTA), 20-21 July 2024, Kuala Lumpur.

Nursalasawati, Binti Rusli and Ahmad Kueh, Beng Hong and Erwan Hafizi, Bin Kasiman (2011) Staggered Grid Computation of Fluid Flow with an Improved Discretisation of Finite Differencing. In: Informatics Engineering and Information Science: International Conference, ICIEIS 2011, 14-16 November 2011, Kuala Lumpur, Malaysia.

Nurulhuda, Nadziri and Idawati, Ismail and Amirul Syahmi, Ardi and Nurul Hadirah, Damni and Annisa, Jamali (2022) Comparison of Microstructural Properties of One- and Two- Part Fly Ash Geopolymer Concretes. In: AWAM International Conference on Civil Engineering 2022, 15-17 February 2022, Universiti Sains Malaysia.

Pender, M.J. and Algie, Thomas and Norazzlina, M.Sa‘don and Orense, R.P (2011) Snap-Back Testing and Estimation of Parameters for Nonlinear Response of Shallow and Pile Foundations at Cohesive Soil Sites. In: 5th International Conference on Earthquake Geotechnical Engineering (5ICEGE), 10 Jan 2011 - 13 Jan 2011, Santiago, Chile.

Pender, M.J. and Beskhyroun, S and Norazzlina, M.Sa'don and Orense, R.P and Wotherspoon, L.M. and Arvanaghian, S. and Storie, L.B and Tidbury, M.D and Lambert, C.B. (2012) Snap-Back Testing of Piles to Estimate Nonlinear Lateral Stiffeness and Damping Properties. In: 11th Australia-New Zealand Conference Geomechanics, 15 July 2018 - 16 July 2018, Melbourne Australia.

Perowansa, Parukaa and Mohd Kamal, Mohd Shah and Md Abdul, Mannan (2013) Influence of axial and oblique impact loads on crush response properties of square tube structures made with FRP pultruded composites. In: 2013 1st Malaysian International Tribology Conference, MITC 2013;, 18 November 2013 through 20 November 2013, Kota Kinabalu, Sabah; Malaysia.

Raja Nur Syaheeza, Raja Mohd Yazit and Elina, Mohd Husini and Mohd Khedzir, Khamis and Yakubu Aminu, Dodo (2021) Assessment on Accuracy of Design Science Research (DSR) Frameworkas a Daylighting MeasurementTool for Islamic Religious School. In: 9th Asian Conference on Environment-Behaviour Studies, AcE-Bs2021, 28-29 Jul 2021, Virtual - Perdana Kota Bharu, Kelantan, Malaysia.

S W, Hii and B L F, Chin and Chung Loong, Yiin and F R S, Majing and Z A, Jawad and H Y, Lim and S, Yusup and M N, Acda and P, Unrean and E, Rianawati (2021) Thermogravimetric kinetic analysis of in-situ catalytic pyrolysis of palm oil wastes with the presence of palm oil wastes ash catalyst. In: 32nd Symposium of Malaysian Chemical Engineers (SOMChE2021), 15th-16th July 2021, Kuching, Sarawak.

Saleh, A.A. and Dewi, Harreh and Sinin, Hamdan (2020) Biodiesel Production from Crude Karanja Oil using Heterogenous Catalyst from Seashells. In: International E-Conference on Green & Renewable Energy (2020: Sarawak) E-PROCEEDING, 18-19 August 2020, Universiti Putra Malaysia Bintulu Campus Sarawak (UPMKB).

Sepawi, I. (2005) Seminar on finite element analysis and design of RC buildings, 25-26th May 2005. In: Seminar on finite element analysis and design of RC buildings, 25-26th May 2005.

Shahrol, Mohamaddan and Herman, Khamis and Annisa, Jamali and Saidatul Ardeenawatie, Awang and noor ayuni, Che zakaria and Akihiko, Hanafusa (2021) Development and Control of Hand Exoskeleton System Using Intended Movement. In: 2021 IEEE 3rd Eurasia Conference on Biomedical Engineering, Healthcare and Sustainability (ECBIOS), 28-30 May 2021, Tainan, Taiwan.

Siti Halipah, Binti Ibrahim and M. N. S., Suri and Khatijah, Binti Yaman and R., Abdul Wahab and Jethro, Anak Henry Adam (2018) Low-Cost Tap Water Purification System (Loco Device). In: International UNIMAS STEM Engineering Conference 2018, "Realizing The 4th Industrial Revolution In Engineering And Built Environment", 12 – 13 September 2018, Kuching, Sarawak..

Siti Noor Linda, Binti Taib and Kolay, Prabir K and Mohd Rahman, Aminur and Mohd Zain, M. I. S. (2010) Correlation Between Different Physical and Engineering Properties of Tropical Peat Soils from Sarawak. In: GeoShanghai International Conference 2010, 2010, Shanghai, China.

Sohiful Anuar, Zainol Murad and Mohd Najib, Mohd Yasin and Faizah, Abu Bakar and Norhawati, Ahmad and Rohana, Sapawi (2015) A 2.4 GHz Two Stage CMOS Class-F Power Amplifier for Wireless Applications. In: The Electronic And Green Materials International Conference 2015 (Egm2015), Surabaya, Indonesia.

Syed Tarmizi, Syed Shazali and Fabian Halley Pata, Alban Dattu and Abang Mohamad Aizuddin, Abang Mohd Mohtar and Magdalene, Andrew-Munot and Noor Hisyam, Noor Mohamed (2020) Influence of Drop Height on the Impact Characteristics of Futsal Ball Size Four. In: The 13th International UNIMAS Engineering Conference 2020 (ENCON 2020), 27-28 October 2020, Kuching, Malaysia.

Sze, S.N and Dorrell, D.G and Cossar, C. (2012) Design and Operation of Very Slow-Speed Generators for a Bristol Cylinder Sea Wave Generating Device. In: Energy Conversion Congress and Exposition (ECCE), 2012 IEEE, 15-20 Sept. 2012.

Tay, Lee Thin and Lee, Yee Yong and Kueh, Ahmad Beng Hong and Lee, Yeong Huei (2021) Flatwise and edgewise compression strengths of sandwich panel with silica aerogel mat. In: The 13th International UNIMAS Engineering Conference 2020 (ENCON 2020) 27th - 28th Oct 2020, Kuching, Malaysia, 27-28 October 2020, Faculty of Engineering UNIMAS.

Ting, S.N and Khoo, H.K (2004) Project Management Development in Malaysia : A case study. In: Australian Institute of Project Management Conference, 10-12 October 2004.

Tze, Ling Jee and Kok, Chin Chai and Kai, Meng Tay and Chee, Peng Lim (2014) Building Fuzzy Inference Systems with Similarity Reasoning: NSGA II-based Fuzzy Rule Selection and Evidential Functions. In: 2014 IEEE International Conference on Fuzzy Systems (FUZZ-IEEE).

Voon Pai, B. and Abidin, W.A.W.Z and Zen, H. and Masri, T. and Abdullah, M. (2011) Open Space Mathematical Model for the Mobile Satellite L-Band Signal in Sarawak using Global Positioning System Technology. In: Proceeding of the 2011 IEEE International Conference on Space Science and Communication (IconSpace), 12-13 July 2011, Penang, Malaysia.

Wilson, Aaron and Abdul Razak, Abdul Karim and Oyarzo-Zera, Claudio and Omenzetter, Piotr and Ingham, Jason M. (2008) Dynamic Performance of Timber Diaphragms in an Unreinforced Masonry Building. In: The 14th World Conference on Earthquake Engineering, October 12-17, 2008, Beijing, China.

Yong, L. and Suaidi, M.K and Pgn. Hj. Yusof, A.A.R (2005) Composite triple beat reduction using the golomb ruler. In: The IASTED International Conference on Optical Communication Systems & Network, 19-21 July 2005.

Yung, A T B and Aminudin, E and Liat, C N S and Neardey, M and Zakaria, R and Hamid, A R A and Ahmad, F and Lee, Yee Yong (2020) Adoption of Building Information Modelling in Malaysia Road Construction. In: 2nd International Conference on Materials Technology and Energy, 6-8 November 2019, Curtin University Miri Campus.

Zhechen, Hou and Fauzan, Sahdi and Christophe, Gaudin and Mark, Randolph (2022) Influence of long-term episodic cyclic loading with rest periods on pipe-soil interaction. In: 20th International Conference on Soil Mechanics and Geotechnical Engineering (Sydney), 1-5 May 2022, Sydney, Australia..

Program Book

Ahmad Kueh, Beng Hong (2023) EAW-ICASEAT2023 International Conference on Learning and Education. [Program Book] (Unpublished)

Report

Norazzlina, M.Sa'don and Abdul Razak, Abdul Karim and Bong, Chih How and Siti Noor Linda, Taib and Chua, Stephanie Hui Li and Alsidqi, Hasan and Ahmad Kamal, Abdul Aziz and Wong, Linda Lin Juan and Louisa Dubah, Hubert Chunggat (2020) Final Report-Consolidated SI Information for Sarawak Soil Database. [Report] (Submitted)

Zayn Al-Abideen, Gregory and Bambang, Karsono (2021) KAJIAN PELAN INDUK SALIRAN MESRA ALAM SERIAN, SARAWAK. [Report]

Standard

Raudhah, Ahmadi and Abdul Razak, Abdul Karim and Norazzlina, M.Sa'don (2017) Malaysia National Annex to MS EN 1998-1: 2015, Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules, seismic actions and rules for buildings. [Standard]

Thesis

Azahar, Bujang. (2012) Settlement of embankment on soft soil treated with conventional preloading-surcharge. Masters thesis, Faculty of Engineering.

Azarina, Binti Azman (2020) Shape Reconstruction using Overset Grid Generation Method with an Iterative Inversion Technique. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Azrin, Ahmad (2024) Performance Testing for Slope Instability due to Suffusion via Site-Specific Response Analysis with Incorporation of Electrical Resistivity Tomography. PhD thesis, Faculty of Engineering.

Azrul, Bin Zulwali Kifli. (2012) Study on passive building design features suitable for Sarawak's Housing. Masters thesis, Universiti Malaysia Sarawak, (UNIMAS).

Bong, Chien Chai (2016) Float and Anchorage System for In-Stream Vertical Micro Hydro Turbine. Masters thesis, Universiti Malaysia Sarawak.

Chai, Chern Tcian (2018) Stormwater Retention Performances of Green Roof under the Tropical Climate of Sarawak. Masters thesis, Universiti Malaysia Sarawak.

Chiew, Fei Ha (2018) Mix Proportion and Compressive Strength Prediction Models for High Performance Concrete based on Computational Intelligence. PhD thesis, Universiti Malaysia Sarawak.

Chong, Fung Yun (2020) The Behaviour of Concrete Wall Panel with Opening. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Daniel Hong Heng, Sim (2024) Synthesis of Tapioca Starch/Palm oil Encapsulated Urea-Impregnated Peppercorn Biochar Controlled-Release Fertilizer for Soil Amendment. Masters thesis, University of Malaysia, Sarawak.

Danish, Ahmed (2024) Numerical Modelling on Load Bearing Performance of Combined Stone Column-Piled Raft Foundation in Soft Clay Soil. PhD thesis, UNIMAS.

Dayang Norfaranina, Binti Datu Unoi (2020) Strength Behaviour of Reconstituted Peat under Different Cone Penetration Rate. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Diana, Ringgau (2020) Implementation of a Data Logging System for a Small Scale Hydrokinetic Turbine. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Ervin Rangga, Edwin (2024) Evaluation of Mechanical and Polishing Performance of Non-Standard Aggregate in Sarawak. Masters thesis, Universiti Malaysia Sarawak.

Franklin, Simon (2015) Application of fuzzy logic based failure mode and effect analysis (FMEA) in risk assessment for express boat passenger terminal in Sibu, Sarawak. Masters thesis, Universiti Malaysia Sarawak.

Irfan, Bin Ahmad Afip (2019) Investigation on the Correlation between Electrical Resistivity and Vane Shear Test of Peat Soil. Masters thesis, Universiti Malaysia Sarawak.

Jaibi, Sabian (2021) Visual Enjoyment Factor in Playability: Case Study of Real Time Strategy Games. Masters thesis, Universiti Malaysia Sarawak.

Jamil, Matarul (2023) Performance-based Durability Specifications of Fly Ash Concrete for Chloride-induced Environment. PhD thesis, Universiti Malaysia Sarawak.

Jong, Alexon Sze Chien. (2008) Design and development of interferometr for hard disk surface measurement. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Lai, Adriana Mook Kim (2009) Finite element (quasi-static) model of electrostatic microelectromechanical cantilever. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Lai, Huat Choi (2008) Leachability and fixation of copper-chrome-arsenic (CCA) preservative from treated Malaysian hardwoods used in construction. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Lai, Sai Hin (2005) Determination of composite friction factor and manning roughness coefficient for Discharge estimation in natural compound channels. PhD thesis, Universiti Malaysia Sarawak (UNIMAS).

Lau, Jing Teck (2017) A Study of Safe Yield Estimation at Tapah River on Water Availability for Water Treatment Plant. Masters thesis, UNIMAS.

Lau, See Hung (2015) Development of a data-driven fuzzy system for evaluating ultimate tendon stress of externally prestressed beams. PhD thesis, Universiti Malaysia Sarawak, (UNIMAS).

Lau, See Hung (2010) Particle Image Velocimetry Analysis On Simple Soil-Structured Interaction. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Lau, Stephenie May Kei (2019) A Quantitative Evaluation Method for Standard Form of Contract in Malaysia. Masters thesis, Universiti Malaysia Sarawak.

Law, Dah Lit (2012) Soil erosion and sediment yield at construction site - a case study. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Lee, Melissa May Syn (2019) Modeling on the Likelihood of Driving Errors Due to Distracted Driving Behaviour (DDB) Associated with Mobile Phone Usage in Malaysia. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Lee, Sharon Fung Choo (2013) Application of horizontal slice method on geosynthetics reinforced slope. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Lee, Shyue Leong (2013) Engineering behavior of soil treated by chemical and electrokinetics. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Lee Thin, Tay (2022) Mechanical and Thermal Behaviour of Thermal Insulated Cement Mortar With Silica Aerogel. Masters thesis, UNIMAS.

Lelly, Marini (2005) Finite cross section analysis for externally prestressed beams at ultimate flexure limit state. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Lennevey, Kinidi (2022) Treatment of Partially Stabilized Landfill Leachate using Combined Ammonia Stripping and GAC Adsorption. PhD thesis, UNIVERSITI MALAYSIA SARAWAK.

Leong, Geok Teng (2019) Efficient Hydraulic Flushing Gate System for Managing Sedimentation in Open Drain. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Liew, Fui Kiew (2007) The relationship between the applied torque and stresses in post-tension structures. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Lim, Hung Ling (2013) Seismic performance of low-rise precast concrete structure with different types of beam-column connections using nonlinear static pushover analysis. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Lio, Gillan Siang Kwang (2012) Effect of roof ventilation on cooling performance of a building. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Liow, Ching Vern (2020) StormPav Green Pavement System as Permeable Road for Detention and Conveyance of Stormwater. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Loh, Siew Ling (2019) Potential of StormPav Green Pavement System Incorporating Stormwater Management. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Md, Rezaur Rahman. (2011) Sustainable wood polymer composites improvement based on conventional and nanotechnological approaches. Masters thesis, Universiti Malaysia Sarawak.

Mohamad Faizal, Mahsen (2019) Detection and Localization of Object using Forward-Backward Time-Stepping for Through-wall Imaging Application. Masters thesis, Universiti Malaysia Sarawak.

Mohammad Aliff, Abd Rahman (2018) Investigation of Oil Palm Harvesting Tools Design and Technique on Work Related Musculoskeletal Disorder. Masters thesis, Universiti Malaysia Sarawak.

Mohammad Rahmat, Bin Derise (2020) Fabrication of Polylactic Acid/Wax/Polyethylene Glycol Composite Filament for Fused Deposition Modeling (FDM). Masters thesis, Faculty of Resource Science & Technology.

Mohd Syukry, Saiful (2021) PERFORMANCE OF FIBRE REINFORCED MORTAR INCORPORATING PALM OIL FUEL ASH. Masters thesis, Universiti Malaysia Sarawak.

Muhammad Abdul Syahid, Bin Saari (2015) A STUDY ON THE BEHAVIOUR OF FRESH SELF-COMPACTING CONCRETE. Masters thesis, UNIMAS.

Nabeeha Amatullah, Azmi (2022) Enhancing Thermal Comfort in Mosques of Malaysia through Passive and Low-Energy Approach. Masters thesis, Faculty of Engineering.

Nafisa, Tamanna (2015) Characterization of Pozzolanic Properties of Waste Glass as Partial Replacement of Cement. Masters thesis, University Malaysia Sarawak, UNIMAS.

Najar, Imtiyaz Akbar (2020) Development of Systematic Land Use Planning Based on Seismic Microzonation: A Case Study on Miri district of Sarawak, Malaysia. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Ngu, Johnny Ong King (2017) Fundamental Flow Characteristics of Individual Lot Stormwater Detention Underneath Residential Car Porch. Masters thesis, UNIMAS.

Noraida, binti Razali (2014) Durability effect on stabilized subgrade soil. Masters thesis, Universiti Malaysia Sarawak, (UNIMAS).

Nur Khairunnisa, Ismail (2024) Simple Shear Behaviour of Sarawak Alluvium. Masters thesis, Universiti Malaysia Sarawak.

Nur Syahina, Yahya (2024) Engineering Properties of Solid and Laminated Glulam of Acacia mangium superbulk Planted in Sarawak. PhD thesis, UNIVERSITI MALAYSIA SARAWAK.

Nurulhuda Shafiqah, Obeng (2023) Experimental Flexural Performance of CFST Beams with Longitudinal Steel Plate Reinforcements. Masters thesis, Universiti Malaysia Sarawak.

Phang, Chui Lian (2006) Robust facial feature extraction for video coding. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Phui Hua, Lai (2022) The Use of Lightweight Foamed Concrete as Fill Material for Road Embankment on Soft Ground in Sarawak. PhD thesis, University Malaysia Sarawak.

Prashobh, Karunakaran (2011) Optimization of a Flexible Manufacturing System (FMS) for High Technology Product Producing Factory via the Modularization of Production Systems. PhD thesis, Universiti Malaysia Sarawak.

Qairuniza, Roslan (2022) Ventilated Roof for Modern Low-cost House in Hot Humid Climate. Masters thesis, Universiti Malaysia Sarawak.

Raghad, Mourad (2023) Towards Regional Sustainability in Architecture. PhD thesis, Engineering.

Seibu Mary, Jacob (2010) Facilitating Critical Thinking In Asynchronous Problem Solving Sessions : A Study Of First Year University Engineering Mathematics. PhD thesis, Universiti Malaysia Sarawak (UNIMAS).

Seniorita Bandy, Ak Kerungan @ Engkasan (2018) Solar Potential and Photovoltaic System Capacity Estimation for Sarawak based on Empirical Model and r.sun Module in GRASS. Masters thesis, Universiti Malaysia Sarawak.

Shawn, Mckenzie (2012) Application of pavement condition index (PCI) assessment method for rural road maintenance in Kuching-Samarahan area. Masters thesis, Faculty of Engineering.

Striprabu, A/L Strimari (2018) Behaviour of Sarawak Clayey Soil using Various By-Product Additives Stabiliser for Potential Subgrade Materials. Masters thesis, Universiti Malaysia Sarawak.

Syazie Nordzaima, Binti Ali Mohamad. (2011) Potential And Properties Of Seawater Desalination In Pulau Salak. Masters thesis, UNIMAS.

Taharah, Binti Edin (2016) An Experimental Investigation of Biodiesel from Jatropha Oil as a Green Fuel for Diesel Engine. Masters thesis, UNIMAS.

Tan, James Yiaw Beng (2012) Optimization of the hidden layer of a multilayer perceptron with backpropagation (bp) network using hybrid k-means-greedy algorithm (kga) for time series prediction. Masters thesis, Universiti Malaysia Sarawak.

Tan, Jerren Yun Ping. (2016) Traditional Procurement Route Selection Guideline for Construction Projects in Malaysia. Masters thesis, UNIMAS.

Tan, Let Hui (2020) Comparative Study on Precast and Conventional Building Constructions for Housing Project. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Tang, Evon Ee Wen (2017) Flow Characteristics of Submerged Orifice for On-site Detention Facility with Drowned Outlet (In Drainage System). Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Ting, Kung Chuang (2009) Face recognition using bit-plane feature extraction approach in neutal networks. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Ting`, Wee Kiet (2019) Stress-Strain-Temperature Behaviour of Deposited Cemented Slurry. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Wong, Kien Kuok. (2002) Parametic study on ductility of RC beams strengthened with external reinforcement. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Wong, Teck Kai. (2003) Effects of induced damages on the flexural fatigue behavior of glass fiber reinforced epoxy (GREs). Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Wong, Woan Jiuan (2006) Modelling and parametic study of externally presstressed beams at ultimate limit state. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Xavier Langit, Ujan (2023) Bolted Connection Design Recommendation of Nyatoh Hardwood for Retrofitting the Unreinforced Masonry Buildings. Masters thesis, Universiti Malasia Sarawak.

Yong, Leong Kong (2018) The Development of Equatorial Soil Loss and Sediment Yield Equations. Masters thesis, Universiti Malaysia Sarawak.

Zamhuri, Bin Hj. Drahman (2016) An Evaluation of Airport Pavement Management System (APMS) Application In Kuching International Airport. Masters thesis, UNIMAS.

Working Paper

Bong, Charles Hin Joo (2015) Sedimentation Monitoring and Modelling in Open Storm Sewer – A Case Study in 2 Kuching City, Malaysia. [Working Paper]

Gaddafi, Ismaili and Khairul Khuzaimah, Abdul Rahim and Alik, Duju and Iskanda, Openg and Zurina, Ismaili (2014) Strength Classification of Aras as fast-growing indigenous species timber in Sarawak. [Working Paper]

Malaysian Qualifications Agency, - (2011) PROGRAMME STANDARDS : ENGINEERING AND ENGINEERING TECHNOLOGY. [Working Paper]

Muhammad Firdaus, Abong Abdullah and Mastika, Lamat and Abdul Riezal, Dim and Andrew Ragai Henry, Rigit (2008) Design Optimisation of a Search and Rescue Micro-Submarine. [Working Paper]