Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General)"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | Y | Z
Number of items at this level: 597.

Wee, Freddy Liang Kho and Puong, Ling Law (2014) A predictive study : carbon monoxide emission modeling at a signalized intersection. Journal of Engineering Science and Technology, 9 (1). pp. 1-14. ISSN 1823-4690

A

A. Oyarzo-Vera, Claudio and Abdul Razak, Abdul Karim and Nawawi, Chouw (2009) Modal testing of an unreinforced masonry house. In: 3rd International Operational Modal Analysis Conference, IOMAC 2009, 4 May 2009 through 6 May 2009, Portonovo; Italy.

Abang Ahmad Salemi, Abg Sulaiman. (2004) Experimental and finite element analysis to determine the strength of beverage can. [E-LPTA] (Unpublished)

Abang Mohamad Faizal, b. Abg. Abdul Ghapor (2001) Brickwall macromodelling using staad III. [E-LPTA] (Unpublished)

Abang Mohammad Nizam, B. Abang Kamaruddin. (2006) Micro Hydro turbine (Design and fabrication). [E-LPTA] (Unpublished)

Abd. Rahman, bin Hashim. (2005) Experimental study on the mix proportions of high strength concrete. [E-LPTA] (Unpublished)

Abdul Gani, Haji Abd. Rahman. (2002) Relationship between surface finish and chips. [E-LPTA] (Unpublished)

Abdul Hadi, Bin Abdul Halik. (2009) Determination of optimum concentration of lime solution for soft soil stabilization. [E-LPTA] (Unpublished)

Abdul Hakim, Bin Razali. (2009) Investigation on mechanical properties of coir fiber reinforced polypropylene composites. [E-LPTA] (Unpublished)

Abdul Karim, Abdul Razak and M.Sa’don, Norazzlina and Ingham, Jason M. (2016) Structural Dynamic Response of an Unreinforced Masonry House using Non-Destructive Forced Vibration. Journal of Earthquake Engineering, 20 (1). pp. 1-11. ISSN 1363-2469

Abdul Qayoom, Jakhrani and Andrew Ragai, Henry Rigit and Othman, A.K. and Saleem, Raza Samo and Shakeel Ahmed, Kamboh (2012) Estimation of Carbon Footprints from Diesel Generator Emissions. International Conference on Green and Ubiquitous Technology (GUT) 2012. ISSN (ISBN) 978-1-4577-2171-7

Abdul Razak, Abdul Karim and Norazzlina, M.Sa'don and Mahshuri, Yusof (2017) Modified Equations for Optimisation of Retrofitting Techniques in Masonry Buildings. In: InTEX17: Product Profile. Strengthening Research and Innovation for Communities Sustainability . Universiti Malaysia Sarawak (UNIMAS), Kota Samarahan. ISBN 978-967-5418-62-4

Abdul Razak, Abdul Karim and Quenneville, Pierre and Norazzlina, M.Sa'don and Mahshuri, Yusof (2017) Investigation the Meraka hardwood failure in bolted connections parallel to the timber grain. International Journal of Engineering & Technology, 7 (3). pp. 62-65. ISSN 0975-4024

Abdul Razak, Bin Abdul Karim and Norazzlina, Binti M.Sa’don and Muhammad Na'imullah, Bin Kamarul Ash'ari and Nursahira, Binti Ibrahim and Xavier Langit, Anak Ujan (2018) Verification of Design Equations for Brittle Failure Mode in Bolted Connections of Local Hardwoods. In: Innovation Technology Expo 2018 (InTEX 2018) Product Profile. Universiti Malaysia Sarawak, Pullman Hotel, Kuching, Sarawak, p. 33. ISBN 978-967-5418-67-9

Abdul Razak, bin Abdul Karim and Norazzlina, Binti M. Sa'don and Muhammad Hafiz, Bin Zainal Abidin and Siti Noor Atikah, Binti Ihwan (2018) Verification of Design Equations for Ductile Failure Mode in Bolted Connections of Local Hardwoods. In: Innovation Technology Expo 2018 (InTEX 2018) Product Profile. Universiti Malaysia Sarawak, Pullman Hotel, Kuching, Sarawak., p. 33. ISBN 9789675418679

Abdul Razi, Bin Haji Kassim (2000) Design of a self-compacting concrete using local materials (Mix-Proportion). [E-LPTA] (Unpublished)

Abu Saleh, Ahmed and M.A., Alam and A., Piee and M.R., Rahman and S., Hamdan (2010) Study of physical and mechanical properties of oil palm empty fruit bunch fiber reinforced polypropylene composites. Journal of Energy & Environment, 2 (1). pp. 16-21. ISSN 0958305X

Abul Haziq, Ahmad Foaad (2008) Evaluation of shear strength of single lap joint. [E-LPTA] (Unpublished)

Achmad, Syafuddin and Salmiati, Salmiati and Hadibarata, Tony and Ahmad Kueh, Beng Hong and Mohd Razman, Bin Salim and Muhammad Abbas, Bin Ahmad Zaini (2018) Silver Nanoparticles in the Water Environment in Malaysia : Inspection, characterization, removal, modeling, and future perspective. Scientific Reports, 8 (986). pp. 1-15. ISSN 2045-2322

Adebayo, Johnson Olufemi and Madzlan, Napiah and Kamaruddin, Ibrahim and Mohamad Raduan, Bin Kabit (2018) Evaluation of Waste Cooking Oil as Sustainable Binder for Building Blocks. E3S Web of Conferences, 65. ISSN 2267-1242

Afzan, Binti Ahmad Zaini and Intan Rohani, Binti Endut (2018) Major challenges in implementing green construction. Journal of Engineering and Applied Sciences, 13 (11). pp. 8865-8869. ISSN 1818-7803

Afzan Ahmad, Zaini and Intan Rohani, Endut (2015) Assessing awareness, understanding, Construction practices and Innovation towards Green Construction. The 6th International Conference On Construction Engineering And Project Management (ICCEPM 2015). ISSN ISBN: 978-89-954572-6-9

Afzan Ahmad, Zaini and Intan Rohani, Endut (2015) Critical Review on the Theoretical Framework and Critical Success Factors in Green Construction. InCIEC 2014. ISSN ISBN : 978-981-287-290-6 (Online)

Afzan Ahmad, Zaini and Intan Rohani, Endut (2017) The drivers towards green construction- An empirical study in Malaysia. Journal of Engineering and Applied Sciences, 12 (4). pp. 814-818. ISSN 1815-949X

Afzan Ahmad, Zaini and Siti Akhtar, Mahayuddin and Nurzawani, Binti Md. Sofwan (2017) Exploring the construction safety risk drivers and risk prevention. Journal of Engineering and Applied Sciences, 12 (8). pp. 1952-1957. ISSN 1816-949X

Ahmad Zuwairisyazwan, Bin Mohd Najib (2005) Validity study using energy - 10 software in a simple building. [E-LPTA] (Unpublished)

Ahmed, M.A. Haidar and Al-Khalid, Othman and Lopes, Luiz A.C. (2017) Flexibility-based anti-islanding protection of a microgrid integrated with power grid. 5th IEEE International Conference on Smart Energy Grid Engineering SEGE 2017. pp. 38-45. ISSN ISBN: 978-153861775-5

Ahong, Manchu (1998) Costing of establishment infrastructure - Celcom as a case study. [E-LPTA] (Unpublished)

Aida Fathirah, Binti Mohd Faridz. (2017) Absorption behaviour of modified concrete using aluminium dross. [E-LPTA] (Unpublished)

Aishah Nur Dyana, binti Johari (2017) Secondary Consolidation Behaviour Of Samarahan Peat Soil. [E-LPTA] (Unpublished)

Akeem, Gbenga Amuda and Fauzan, Bin Sahdi and Alsidqi, Hasan and Siti Noor Linda, Binti Taib and Noel, Boylan and Aliaa, Mohamad (2019) Measurement of Amorphous Peat Shear Strength in the Direct Shear Box at High Displacement Rates. Geotechnical and Geological Engineering, 37 (2). pp. 1059-1072. ISSN 1573-1529

Akeem, Gbenga Amuda and Fauzan, Sahdi and Alsidqi, Hasan and Siti Noor Linda, Binti Taib (2018) Variable penetration rate testing for shear strength of peat – a review. International Journal of Geotechnical Engineering, 2018. ISSN 19386362

Alifia Hamzah, Bin Johari (2019) Development of Equatorial Organic Soil Loss and Sediment Yield Equations. PhD thesis, Universiti Malaysia Sarawak (UNIMAS).

Alsidqi, B.Mahmud Hasan and Ali, Karrech and Bruno, Chareyre (2017) Evaluating force distributions within virtual uncemented mine backfill using discrete element method. International Journal of Geomechanics, 17 (7). ISSN 15323641

Amanda, anak Mangan. (2010) A case study of preloading in peat using finite element method with plaxis software. [E-LPTA] (Unpublished)

Aminudin, Bin Abdul Kadir. (2009) Mechanical properties of jute and palm fiber reinforced hybrid polypropylene composites. [E-LPTA] (Unpublished)

Amir Azam, Khan and Magdalene, Anak Andrew Munot and Shirley, Anak Johnathan Tanjong and Rudiyanto, Bin Philman Jong and Hishammudin Afifi, Bin Huspi (2018) Gearing Towards a Greener Future. UNIMAS Publisher, Kota Samarahan, Sarawak. ISBN 9789672008552

Andreana Allyssa, Anak Henry (2017) Develpoment of a laboratory model to study mechanics of slurry deposition subjected to temperature increase. [E-LPTA] (Unpublished)

Aneela, Sabir and Atif, Islam and Muhammad, Shafiq and Amir, Shafeeq and Muhammad Taqi, Zahid Butt and Nasir M., Ahmad and Khairuddin, Sanaullah and Tahir, Jamil (2016) Novel polymer matrix composite membrane doped with fumed silica particles for reverse osmosis desalination. Desalination, 368. pp. 159-170. ISSN 0011-9164

Arlia Najeera, Binti Abdul Rahim. (2017) Application of geographic information system (GIS) in traffic signal operational system. [E-LPTA] (Unpublished)

Askari, Masoud and Moghavvemi, M. and Almurib, Haider Abbas F. and Ahmed M.A, Haidar (2017) Stability of Soft Constrained Finite Horizon Model Predictive Control. IEEE Transactions on Industry Applications (99). ISSN 0093-9994

Au, Fuk Yaw. (2001) Design of structural elements for 5 storey residential 'class D/E' flat. [E-LPTA] (Unpublished)

Awang Firdaus, Bin Awang Aemeran (2010) Open channel flow through unsubmerged rigid vegetation. [E-LPTA] (Unpublished)

Awang Sadit, D.D (2005) The influence of limited parking availability and pricing on travel pattern to reduce traffic congestion. [E-LPTA] (Unpublished)

Awg Kamarudin, Bin Awg Japot. (2000) Design of load bearing brickwork systems. [E-LPTA] (Unpublished)

Azahar, Bujang. (2012) Settlement of embankment on soft soil treated with conventional preloading-surcharge. Masters thesis, Faculty of Engineering.

Azhaili, Baharun and Siti, Halipah Ibrahim and Mohammad Omar, Abdullah and Ooi, Koon Beng (2011) A Passive Malaysian Residential Building With A Hydronic Radiator. International Journal of Recent Research and Applied Studies, 7 (4). pp. 380-389. ISSN 2076-7366

Azizah Ummira, Bt. Hj Abot (2010) Comparison of marshall mix properties between normal acw14 hot mix asphalt mixture and acw14 with carbide lime as filler replacement materia. [E-LPTA] (Unpublished)

Azmi, Bin Amat. (1999) Parametric study of flexural strengthening of RC beam using external reinforcement. [E-LPTA] (Unpublished)

Azrul, Bin Zulwali Kifli. (2012) Study on passive building design features suitable for Sarawak's Housing. Masters thesis, Universiti Malaysia Sarawak, (UNIMAS).

B

Baharun, A. (2011) Experimental validation of energyPlus simulation of a single storey building. UNIMAS E-Journal of Civil Engineering, 2 (1).

Bajy @ Mohd Azlan, Bin Doimin. (2004) Creep crack growth testing of plastic. [E-LPTA] (Unpublished)

Bausah, A. (2006) Evaluation and analysis on existing sanitary landfill's liner and leachate collection systems. [E-LPTA] (Unpublished)

Beatrice, Anak No'eh (2010) Mobile satellite open space empirical data modeling. [E-LPTA] (Unpublished)

Beatrice, Bucking. (2017) Development of new generation of field vane shear test. [E-LPTA] (Unpublished)

Belinda Anak, Mason (2008) Investigation on the effect of different levels of peat sampling on oedometer test. [E-LPTA] (Unpublished)

Berita, Harian (2012) UNIMAS terima geran RM350,000. [Newspaper Clipping] (In Press)

Berita Harian (2013) Sukar laksana projek pembangunan. [Newspaper Clipping] (In Press)

Bernama (2013) Unimas Research Centre Can Meet Score's Needs For More Engineers, 03 July 2013. [Newspaper Clipping] (In Press)

Bong, C.H.J (2014) A Review on the Self-Cleansing Design Criteria for Sewer System. UNIMAS e-Journal of Civil Engineering, 5 (2). pp. 1-7. ISSN 1985-3874

Bong, C.H.J (2003) Study of flow in a non-symmetrical compound channel with rough flood plain. [E-LPTA] (Unpublished)

Bong, C.H.J and Laub, T.L. and Ghanic, A. Ab. (2016) Potential of tipping flush gate for sedimentation management in open stormwater sewer. Urban Water Journal, 13 (5). pp. 486-498. ISSN 1573-062X

Bong, C.H.J and Liow, C.V. (2019) Hydraulic characteristics of flow through angled baffle-plates in an open channel. International Journal of River Basin Management, 2019. ISSN 1571-5124

Bong, Charles Hin Joo and Lau, Tze Liang and Aminuddin, Ab Ghani and Chan, Ngaiweng (2016) Sediment deposit thickness and its effect on critical velocity for incipient motion. Water Science and Technology, 74 (8). pp. 1876-1884. ISSN 02731223

Bong, Chien Chai (2016) Float and Anchorage System for In-Stream Vertical Micro Hydro Turbine. Masters thesis, UNIMAS.

Bong, David B L and Lai, K.C. and Joseph, A. (2009) Automatic Road Network Recognition and Extraction for Urban Planning. International Science Index, Civil and Environmental Engineering, 3 (5). ISSN 2409-0441

Bong, J.H.L (2010) Study the Structural Behaviour of Ferrocement Beam. UNIMAS e-Journal of Civil Engineering, 1 (2).

Bong, Mei Lun. (2010) Effect of compressive stress in concrete on ultrasonic pulse velocity with different aspect ratios. [E-LPTA] (Unpublished)

Bong, Yung Foo. (2006) The effectiveness of additional separate lanes as right turn and u-turn facility at signalized intersection on queue probability and delay. [E-LPTA] (Unpublished)

Borhan, M.M (2011) Laboratory study of water absorption of modified mortar. UNIMAS E-Journal of Civil Engineering, 2 (1).

Burmamu, B.R. and Law, P.L. (2015) Lagrangian Model Framework: A Cutting Edge towards Predicting Pollutants Transport in River Benue of Greater City Yola, Nigeria. Global Journal For Research Analysis, 4 (11). pp. 148-151. ISSN 2277 - 8160

C

Catherine, Anak Alang. (2017) Numerical analysis of embankment on soft soil reinforced with stone column (PLAXIS 8.2 Software). [E-LPTA] (Unpublished)

Cathy Aqunia, Anak Roderick Sube. (2004) Experimental study on the effect of coarse aggregate type on mechanical properties of high strenght concrete. [E-LPTA] (Unpublished)

Chai, Chern Tcian (2018) Stormwater Retention Performances of Green Roof under the Tropical Climate of Sarawak. Masters thesis, Universiti Malaysia Sarawak.

Chai, N.P and Abidin, W.A.W.Z and Ibrahim, W.H.W and Hong Ping, K. (2012) Technology advancement in vehicle monitoring system for accident prevention. UNIMAS E-Journal of Civil Engineering, 3.

Chai, Peng How. (2005) Ultrasonic pulse velocity (UPV) test on concrete under compression : a study on effect of aspect ratio. [E-LPTA] (Unpublished)

Chan, Kwok Kwang (2009) Investigation Into An Optimum Mix Proportion For Foamed Concrete With High Stability In Water. [E-LPTA] (Unpublished)

Chang, Josephine Hui Lai and Md. Rezaur, Rahman and Sinin, Hamdan and Mahbub, Hasan and Liew, Fui Kiew and Md. Mizanu, Rahman and Md. Faruk, Hossen (2017) Thermomechanical performance and high Brunauer-Emmett-Teller surface area of poly(vinyl alcohol)/silica/clay and poly(vinyl alcohol)/(fumed silica)/clay nanocomposites. Journal of Vinyl and Additive Technology, 23. pp. 119-127. ISSN 1548-0585

Chee, K.N and Wong, J.W.J (2004) Risk of shear failure in RC Beams strengthened in Flexure via external prestressing. In: The 3rd International Conference on Advances in structural Engineering & Mechanism (ASEM), 2-4 September 2004.

Chee, Khoon Ng and Kiang, Hwee Tan (2006) Flexural behaviour of externally prestressed beams. Part I: Analytical model. Engineering Structures, 28 (4). pp. 609-621. ISSN 0141-0296

Chee, Khoon Ng and Kiang, Hwee Tan (2006) Flexural behaviour of externally prestressed beams. Part II: Experimental investigation. Engineering Structures, 28 (4). pp. 622-633. ISSN 0141-0296

Chew, Meng Yew (2006) Deformation of wood in compression due to moisture content changes. [E-LPTA] (Unpublished)

Chia, F.J (2004) Ultrasonic pulse velocity (upv) in concrete under compression:a study on the effect of orientation of measurement. [E-LPTA] (Unpublished)

Chia, H.C (2009) Behavior of composite layered slab of eps concrete and normal concrete. [E-LPTA] (Unpublished)

Chian, Haur Jong and Kai, Meng Tay and Chee, Peng Lim (2014) A New Fuzzy Ratio and Its Application to the Single Input Rule Modules Connected Fuzzy Inference System. 2014 IEEE International Conference on Fuzzy Systems (FUZZ-IEEE).

Chieng, B.Y (2009) Greenhouse Gas Emissions From Tropical Peat Forest And Peat Oil Palm Plantation - A Review. [E-LPTA] (Unpublished)

Chieng, S.M (2003) Monitoring of a galvanized metal water tank at Unimas temporary campus by using acoustic emission: a case study. [E-LPTA] (Unpublished)

Chiew, Fei Ha (2018) Mix Proportion and Compressive Strength Prediction Models for High Performance Concrete based on Computational Intelligence. PhD thesis, Universiti Malaysia Sarawak.

Chiew, Fei Ha and Lau, See Hung and Ng, Chee Khoon (2018) Monotonicity preserving SIRMs-connected fuzzy inference system for predicting HPC compressive strength. Intelligent Decision Technologies, 12 (3). pp. 293-302. ISSN 1872-4981

Chin, Kui Fern (2003) Simplication of boolean function based on simplification rules. Masters thesis, Universiti Malaysia Sarawak.

Chin, T.Y (2009) Flexural and time dependent behavior of palm shell aggregate concrete beam. [E-LPTA] (Unpublished)

Chin, Ying Teh and Tay, Kai Meng and Chee, Peng Lim (2013) Interval-based and fuzzy set-based approaches to modeling of fuzzy inference systems with the local monotonicity property. 2013 IEEE International Conference on Fuzzy Systems (FUZZ). ISSN 1098-7584 (Print)

Chin, Ying Teh and Yi, Wen Kerk and Tay, Kai Meng and Chee, Peng Lim (2018) On Modelling of Data-Driven Monotone Zero-Order TSK Fuzzy Inference Systems using a System Identification Framework. IEEE Transactions on Fuzzy Systems, 26 (6). pp. 3860-3874. ISSN 10636706

Chin Peow, Woon and Poi, Ngian Shek and Mahmood, Bin Md Tahir and Ahmad Kueh, Beng Hong (2015) Compressive strength of ground waste seashells in cement mortars for masonry and plastering. Applied Mechanics and Materials, 727. pp. 167-170. ISSN 1662-7482

Ching, Vern Liow and Yau, Darrien Seng Mah and Marlinda, Abdul Malek (2019) Modelling of StormPav Green Pavement System Using Storm Water Management Model and SolidWorks Flow Simulation. International Journal of Recent Technology and Engineering (IJRTE), 8 (2). pp. 4673-4679. ISSN 2277-3878

Ching, Vern Liow and Yau, Darrien Seng Mah and Mohd Remy Rozainy, bin Mohd Arif Zainol (2019) Modelling of StormPav Green Pavement System with Storm Water Management Model and InfoWorks Collection System. International Journal of Recent Technology and Engineering (IJRTE), 8 (2). pp. 1449-1452. ISSN 2277-3878

Chong, C.T (2006) Determination of civil engineering construction time duration. [E-LPTA] (Unpublished)

Chong, Chooi Yeng. (2010) Effect of compressive stress in concrete on ultrasonic pulse velocity. [E-LPTA] (Unpublished)

Chong, G.S.C (2000) Design of a water distribution system for proposed BDC Housing Development Scheme at Block 8 Klauh Land district, Sri Aman Division. [E-LPTA] (Unpublished)

Chong, Gracie Shih Chin (2004) A model for prediction of nearby population and in-plant workers exposure to air pollutants released from industrial facilities. Masters thesis, Universiti Malaysia Sarawak, UNIMAS.

Chong, Huey Ching (2006) Experimental study on the properties of local coarse aggregate in Sarawak. [E-LPTA] (Unpublished)

Chong, K.H and Law, P.L and Rigit, A.R.H. and Baini, R. and Saleh, S.F and Awangku Yussuf, A.A.R (2014) Operational Parameters Assessment of a Biomass-To-Fuel Gas Converter. UNIMAS e-Journal of Civil Engineering, 5 (1).

Chong, Kah Weng. (2005) Modelling hourly runoff using ann for sg. Sarawak Kanan Basin. [E-LPTA] (Unpublished)

Chua, Chong Liang (2009) Modeling and controller design of a ball and beam system. [E-LPTA] (Unpublished)

Chua, David Sing Ngie and Goh, W.J. and Lim, S.F. and Jospeh, A. and Oon, Y.B. and Sia, C.V (2018) Development of an Automatic Vehicular Heatstroke Detection System. IOP Conference Series: Materials Science and Engineering, 429. ISSN 17578981

Chua,, Mcfarlane Kang Wei (2009) Properties of polystyrene concrete bricks with sawdust ash. [E-LPTA] (Unpublished)

Chung, Eddie Chie Jin (2003) The effect of concrete grade in detecting internal defects of concrete by ultrasonic pulse velocity method. [E-LPTA] (Unpublished)

Chung, Jenn Chiu. (2002) 2 dimensional computer modelling on flow in hydraulic turbine generator cooler. [E-LPTA] (Unpublished)

Chung, Mui Zhi (2010) Development of ultra high strength concrete based on locally available materials and fly ash. [E-LPTA] (Unpublished)

D

Dakek, I. (2000) To investigate the possibility of threshing pepper spikes and removing of pepper skin by mechanical mean. [E-LPTA] (Unpublished)

Danggang, H. (2000) Optimum fine and coarse aggregates proportions to produce strength of concrete. [E-LPTA] (Unpublished)

Dasilah, bt. Ibrahim (2008) Design of stabilizing foundation for one-storey office building on peat soil. [E-LPTA] (Unpublished)

Dawood, Eethar Thanon and Yahya Ziad, Mohammad and Waleed, Abdulrazzak Abbas and Mohammad, Abdul Mannan (2018) Toughness, elasticity and physical properties for the evaluation of foamed concrete reinforced with hybrid fibers. Heliyon, 4. pp. 1-15. ISSN 2405-8440

Dayang Diyana, Abang Bohari (2009) Finite element analysis in T-Joint pipe for brass and PVC. [E-LPTA] (Unpublished)

Dayang Izzatie, Binti Awg Dahlan (2017) Chemical stabilization of pretreated amorphous peat via cement and fly ash with lime. [E-LPTA] (Unpublished)

Dayang Lydiawati, Awang Jemat. (2006) Design and analysis beams for a four storey stell structure using csc software. [E-LPTA] (Unpublished)

Dayang Nazihah, Binti Abang Uthman. (2017) Regional rainfall frequency analysis for Samarahan river basin. [E-LPTA] (Unpublished)

Dayang Suhaila, Awang Suhaili (2006) Estimating Missing Precipitation to Optimize Parameters for Prediction of Daily Water Level Using Artificial Neural Network. [E-LPTA] (Unpublished)

Dayangku Salma, Binti Awang Ismail and Azman, Bin Kassim and Hisham, Bin Mohamad and Ahmad Safuan, Bin A. Rashid and Aliff Ridzuan, Bunawan (2018) Application of Brillouin-based distributed optical fibre sensing technology to measure strain development of a slope model. MATEC Web of Conferences, 250. pp. 1-12. ISSN 2261-236X

Deanne, anak Edwin and Shafrida, binti Sahrani and Kismet, anak Hong Ping (2018) Efficiency of scattering algorithm with overset grid generation for detection of buried object. In: Microwave Conference (APMC), 2017 IEEE Asia Pacific, 13-16 Nov. 2017, Kuala Lumpar, Malaysia ..

Diana, Luke Embah (2004) Operational assessment of Sarawak river barrage and flood monitoring system. [E-LPTA] (Unpublished)

Dillah, D.N (2009) Effect of floor tiles on the behaviour of slabs. [E-LPTA] (Unpublished)

Dominic Anak, Winston Bale. (2006) Water piping and drainage system in a building. [E-LPTA] (Unpublished)

Dorothy, Chai Sin Yee (2005) Dispute resolution methods in the construction industry. [E-LPTA] (Unpublished)

Dzufi Iszafawaty, Bt. Ispawi (2010) Parametric study of slope stability using plaxis software. [E-LPTA] (Unpublished)

E

E. E., Putri and F. J. H., Rewani and Mohammad Abdul, Mannan and Wan Hashim, Bin Wan Ibrahim and Mohamad Raduan, Bin Hj. Kabit and Larry, Anak Silas Tirau and Ron Aldrino, Chan@Ron Buking (2019) Sensitivity analysis of stormpav composite pavement. IOP Conference Series: Materials Science and Engineering, 602. pp. 1-12. ISSN 1757-899X

Ehsan, Ahmed (2011) Performance of profiled steel sheet dry board system under flexural bending and vibration. In: UNSPECIFIED.

Engkoh, Ak Brayan (2002) Bank sloughing and deposition at and near mouth of Sungai Bako. [E-LPTA] (Unpublished)

Eugene Chanel, Anak Jimbap. (2006) Design of a water reticulation system for proposed desa ilmu phase 15, 18 and 19 housing scheme at Samarahan Land district, Sarawak. [E-LPTA] (Unpublished)

Ewat, P. (2006) Development and performance tests of a sedimentation trap for silt and clay particles. [E-LPTA] (Unpublished)

F

Faatima Zahra, Ahmat Asim and Norsuzailina, Mohamed Sutan (2015) Thermal Characterization of Pozzolanic Activity of Hydrated Cement System Modified by Silica Based Industrial Waste. Journal of Applied Science & Process Engineering, 2 (1). pp. 1-7. ISSN 2289-7771

Faculty of, Engineering (2003) Proceedings : Engineering and technology conference 2003 (EnTech 2003). In: Engineering and technology conference 2003 (EnTech 2003), 30th July 2003 - 1st August 2003 . (Unpublished)

Faculty of, Engineering (2001) Proceedings of the Sixth Geotechnical Engineering Conference (GEOTROPIKA 2001). In: Geotechnical Engineering Conference , 2001.

Fadzli, Mohamed Nazri and Ramadhansyah, Putra Jaya and Badorul Hisham, Abu Bakar and Raudhah, Ahmadi (2016) Fire resistance of ultra-high performance fibre reinforced concrete due to heating and cooling. MATEC Web of Conferences, 87. ISSN 2261236X

Faizal, Abd. Rahman (2004) Study on lighting in office buildings Kuching area. [E-LPTA] (Unpublished)

Faizal, Bin Baharum and Muhamad Hanif, Bin Hassan and Mohd Dzulkarnaen, Bin Sudirman and Mohd Nasrun, Bin Mohd Nawi and Siti Halipah, Binti Ibrahim (2018) A Comparative Study of Levelized Cost of Electricity Between Photovoltaic and Concentrated Solar Powered Power Plants in Malaysia. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 50 (2). pp. 134-145. ISSN 2289-7879

Farina, Unus (2006) Study on recycling programs in Kuching. [E-LPTA] (Unpublished)

Faris Nur, Bin Shuhaini (2017) Design high strength concrete by using Ultrafine POFA and fly ash as cement replacement. [E-LPTA] (Unpublished)

Fedelia, Anak Fedrick Ali (2017) Strength properties of hydrated gypsum powder. [E-LPTA] (Unpublished)

Fedilis Ann, Anak Dizer (2010) Analysis of critical factors affecting level of service at traffic light junction. [E-LPTA] (Unpublished)

Fei, Ha Chiew and Chee, Khoon Ng and Kok, Chin Chai and Tay, Kai Meng (2017) A Fuzzy Adaptive Resonance Theory-Based Model for Mix Proportion Estimation of High-Performance Concrete. Computer-Aided Civil and Infrastructure Engineering, 32 (9). ISSN 1467-8667

Florianna Lendai, Michael Mulok and Helmi, Sumilan and Zainon, Noor Zainura (2017) Assessment of city's sustainability performance via Fuzzy Lingustic Scale: East Malaysia case study. Ecological Indicators. ISSN 1470-160X (Submitted)

Fong, A.W.Y (2005) Unified design approach for structural concrete based on eurocode 2. [E-LPTA] (Unpublished)

Foo, Swee Wen (2017) 3D modelling using solidworks : wall-mounted rainwater tank for stormwater detention in commercial areas. [E-LPTA] (Unpublished)

Franklin, Simon (2015) Application of fuzzy logic based failure mode and effect analysis (FMEA) in risk assessment for express boat passenger terminal in Sibu, Sarawak. Masters thesis, Universiti Malaysia Sarawak, (UNIMAS).

Franky, Ajie (2006) A comparison between eurocode 3 (1992) and British standard 5950 (2000) for flexural member design. [E-LPTA] (Unpublished)

Frezzal, Faisal. (2009) Designing swiftlet farming using energy plus. [E-LPTA] (Unpublished)

Fui, Kiew Liew and Sinin, Hamdan and Md Rezaur, Rahman and Mohamad Rusop, Mahmood and Chang, Josephine Hui Lai (2017) The effects of nanoclay and tin(IV) oxide nanopowder on morphological, thermo-mechanical properties of hexamethylene diisocyanate treated jute/bamboo/polyethylene hybrid composites. Journal of Vinyl and Additive Technology, 23. pp. 119-127. ISSN 1548-0585

G

Gabriel Stotoh, Ak Gingos (2010) Absorption factor of mortar. [E-LPTA] (Unpublished)

Gaddafi, Ismail and Badorul Hisham, Abu Bakar and Khairul Khuzaimah, Abdul Rahim (2011) Basic and Grade Stress for Some Timber in Sarawak. UNIMAS E-Journal of Civil Engineering, 2 (2).

Gaddafi, Ismaili (2005) Experimental study on the behaviour of shrinkage and compaction between peat and modified peat soil. [E-LPTA] (Unpublished)

Gaddafi, Ismaili and Badorul Hisham, Abu Bakar and Khairul Khuzaimah, Abdul Rahim (2011) The Behavior of Strength Properties from Three Different Tree Boles of Aras in Sarawak. UNIMAS E-Journal of Civil Engineering, 2 (2).

Gaddafi, Ismaili and Badorul Hisham, Abu Bakar and Khairul Khuzaimah, Abdul Rahim (2011) Evaluation of Acacia Mangium in Structural Size at Green Condition. UNIMAS E_Hournal of Civil Engineering, 2 (2).

Gaddafi, Ismaili and Khairul Khuzaimah, Abdul Rahim and Alik, Duju and Iskanda, Openg and Zurina, Ismaili (2014) Strength Classification of Aras as fast-growing indigenous species timber in Sarawak. Working Paper. Universiti Malaysia Sarawak, (UNIMAS).

Gan, Y.K (2008) Design and construction of a mini fuel cell for interference detection and a hybrid solar / fuel cell / battery multi purpose emergencey kit. Masters thesis, Universiti Malaysia Sarawak, UNIMAS.

Ghazali, Bin Ahmad (2010) Performance of profiled steel sheet dry board panel (PSSDB) against flexural and vibration. [E-LPTA] (Unpublished)

Ghulam, Hussain and Abdul Qadeer, Malik and Khairuddin, Sanaullah (2011) The Waveshaper Effect on Ta-MS Multiliner Explosive Formed Pojectile with Tantalum as Penetrator and Mild Steel as Stabilization Base. Mehran University Research Journal Of Engineering & Technology, 30 (3). ISSN 0254-7821]

Goh, C.T (2009) Characteristics And Characterization Methodologies Of MSW At Source - A Review. [E-LPTA] (Unpublished)

Goh, H.C (2009) Concrete mix design using crushed pebble as replacement material in concrete mixture. [E-LPTA] (Unpublished)

Goh, H.W (2004) The study on milling machining for aluminium alloy. [E-LPTA] (Unpublished)

Goh, P.H (2009) Occupation safety and health in local and international standard forms of construction contract. [E-LPTA] (Unpublished)

Goh, Y.B (2000) Point to point wireless infrared light communication. Masters thesis, Universiti Malaysia Sarawak, UNIMAS.

Goh,, Chun Teck (2009) Characteristics and characterization methodologies of msw at source - a review. [E-LPTA] (Unpublished)

H

H. R., Ramji and S. L., Leo and I. A. W., Tan and M. O., Abdullah (2014) Comparative Study of Three Different Adsorbent-Adsorbate Working Pairs for a Waste Heat Driven Adsorption Air Conditioning System Based On Simulation. International Journal of Recent Research and Applied Studies, 18 (2). pp. 109-121. ISSN 2349-4891

Hadiatul Aida, Adanan (2000) Project analysis on two low cost housing schemes in Sarawak (Modular method vs conventional method). [E-LPTA] (Unpublished)

Hafiz Fadillah, Alhadi (2004) Neural network for rainfall runoff modelling. [E-LPTA] (Unpublished)

Hamiza, Mohamad Salleh. (2006) Evaluation of sight distance at an intersection with stop sign control. [E-LPTA] (Unpublished)

Hammida, S.A. and Ahmad, F. (2015) Chemotype of litsea cubeba essential oil and its bioactivity. Natural Product Communications, 10 (7). pp. 1301-1304. ISSN 1934578X

Han, N.T.H (2010) Waste thermal heat pump. [E-LPTA] (Unpublished)

Hana Aifah, A.S Suhaili (1999) Parametric study of excavation with sheet pile by plaxis. [E-LPTA] (Unpublished)

Hasan, A. Rahman and Sahdi, Fauzan and Norsuzailina, Sutan and Mijan, N. and Sinin, Hamdan (2018) Strength Behavior of Sedimented Gypsum Slurry. Geotechnical Testing Journal, 41 (6). pp. 1155-1165. ISSN 1945-7545

Hasan, Alsidqi (2016) Preface. MATEC Web of Conferences, 87. ISSN 2261236X

Heidarpour, Amin and Abdul Azim, Abdullah and Bradford, Mark A. (2009) Non-linear inelastic analysis of steel arches at elevated temperatures. Journal of Constructional Steel Research, 66 (4). pp. 512-519. ISSN 0143-974X

Heidarpour, Amin and Abdul Azim, Bin Abdullah and Bradford, Mark A. (2010) Non-linear thermoelastic analysis of steel arch members subjected to fire. Fire Safety Journal, 45 (3). pp. 183-192. ISSN 0379-7112

Helmi, Mohamad Jamil. (2005) Experimental study on the factor affecting coagulation and flocculation. [E-LPTA] (Unpublished)

Henry Sidie, Sulang. (2005) The effect of road geometric (Gradient and curve) on friction value for interlocking concrete pavement. [E-LPTA] (Unpublished)

Ho, Kui Hua. (2010) Pavement mix design alternative use of waste product as filler material. [E-LPTA] (Unpublished)

Ho,, Chun Han. (2010) Standard form of construction contract :a study of the application of federation internationale des ingeieurs-conseils (FIDIC) in Malaysia. [E-LPTA] (Unpublished)

Hojati, A.T and Fereirra, L. and Charles, P. and Kabit, M.R (2011) An Analysis of Traffic Incidents on an Australian Urban Road Network. In: Australasian Transport Research Forum 2011 Proceedings, 28-30 September 2011.

Hojati, A.T and Ferreira, L. and Charles, P. and Kabit, M.R (2012) Analysing freeway traffic incident duration using an Australian data set. J. Road Transp. Res., 21 (2). pp. 19-31.

Hong,, Calvin Chiao Chun (2009) Hourly water level prediction of sungai bedup catchement using pre-developed ANNs model from Siniawan catchment. [E-LPTA] (Unpublished)

Hu, W.K (2004) Comparative study of structural steel and reinforced concrete method : a project management case study. [E-LPTA] (Unpublished)

Hu, Wei Kiet. (2004) Comparative study of structural steeland reinforced concrete method : a project management case study. [E-LPTA] (Unpublished)

Hu,, Wei Kiet (2008) Time and cost study on cold-formed steel and reinforced concrete construction - a comparison. Masters thesis, Universiti Malaysia Sarawak.

Husin, M.H. and Leong, S.Y. and Sabri, M.F.M. (2013) Built in self test for RAM using VHDL. IEEE Colloquium on Humanities, Science and Engineering (CHUSER), 2012. ISSN ISBN: 978-1-4673-4617-7

I

Ibrahim, S.H and Baharun, A. and Nawi, M.N.M and Junaidi, E. (2014) Assessment of thermal comfort in the mosque in Sarawak, Malaysia. International Journal of Energy and Environment, 5 (3). pp. 327-334. ISSN 2076-2909

Imran, Muhammad Syukri and Azhaili, Baharun and Siti Halipah, Ibrahim and Wan Azlan, Wan Zainal Abidin (2017) Investigation of earth tube system application in low income building in Kuching, Sarawak. Journal of Engineering Science and Technology, 12 (6). pp. 1433-1445. ISSN 18234690

Intan Nurfauzirah Shafiqah, Binti Hamzani. (2017) Effect on compressibility of stabilized peat using fiber reinforcement (sawdust) techniques. [E-LPTA] (Unpublished)

Irawanddy, Bin Rosli (2001) A case study on a piling system for high rise building along Sarawak River. [E-LPTA] (Unpublished)

Irfan, Ahmad Afip and Siti Noor Linda, Binti Taib and Kamaruzaman, Jusoff and Liyana, Ahmad Afip (2019) Measurement of Peat Soil Shear Strength Using Wenner Four-Point Probes and Vane Shear Strength Methods. International Journal of Geophysics, 2019. ISSN 1687-8868

Irfan, Bin Ahmad Afip (2019) Investigation on the Correlation between Electrical Resistivity and Vane Shear Test of Peat Soil. Masters thesis, Universiti Malaysia Sarawak.

Isa Ebtehaj and Hossein Bonakdari and Amir Hossein Zaji and Hin Charles Joo Bong and Aminuddin Ab Ghani (2016) Design of a new hybrid artificial neural network method based on decision trees for calculating the Froude number in rigid rectangular channels. Journal of Hydrology and Hydromechanics, 64 (3). pp. 252-260. ISSN 0042790X

Isaruddin, Bin Morshidi. (2001) Parametric study of deep excavation using sage crisp software. [E-LPTA] (Unpublished)

Ismail, I. and Provis, J.L. and Deventer, J.S.J and Sinin, Hamdan (2012) Chloride diffusion and pore structure in geopolymers. In: Second International Conference on Microstructural-related Durability of Cementitious Composites, 11-13 April 2012, Amsterdam, The Netherlands.

Iwan, Bin Halmi (2009) Design wave nearshore using the application of linear wave theory. [E-LPTA] (Unpublished)

Izzian, Izzuddin. (2009) Sensitivity analysis of Malaysian highway capacity manual for unsignalised intersections. [E-LPTA] (Unpublished)

J

Jakhrani, A.Q. and Othman, A.K. and Rigit, A.R.H. and Samo, S.R. and Kamboh, S.A (2012) A novel analytical model for optimal sizing of standalone photovoltaic systems energy. Energy, 46 (1). pp. 675-682.

Jamil, Matarul and Chiew, Fei Ha and Md. Abdul, Mannan and Azmi, Ibrahim and Ezze Elma, Mohd. Yusof (2019) Relationship between Compressive strength and Ultra-Sonic Pulse Velocity (UPV) of Local Fly Ash Concrete. Journal of Engineering and Applied Sciences, 14 (3). pp. 6085-6088. ISSN 1816-949X

Jenny Kuihoon, Anak Kulu (2006) Application of infoworks modeling for flood mapping of Maong River. [E-LPTA] (Unpublished)

Jesper Hansen, Bin Lawrence Jema-Ee (2009) A study on leaching characteristic of coal ash from landfills. [E-LPTA] (Unpublished)

Jessica Lansay, anak Andrew Abak (2002) Application of acoustic emission (EA) technique in various types of woods. [E-LPTA] (Unpublished)

Johari, A.H. and Law, P.L and Taib, S.N.L. and Yong, L.K. (2017) Assessment of Soil Erosion by Simulating Rainfall on an Equatorial Organic Soil. Journal of Civil Engineering, Science and Technology, 8 (2). ISSN 2462-1382

Johin, G. (2000) Optimum fine and coarse aggregates proportion to produce concrete strength. [E-LPTA] (Unpublished)

John Gary, J. (2009) Determination of spillway capacity of proposed bengoh dam. [E-LPTA] (Unpublished)

Jong, Ho Sing. (2010) Durability properties of recycled aggregate concrete. [E-LPTA] (Unpublished)

Jong, L.Y. and Teo, DCL and Mannan, Mohammad Abdul and Teo, Delsye Ching Lee (2019) Characteristics of Artificial Lightweight Aggregates Produced from Palm Oil Fuel Ash and Fly Ash Using Cold-Bonding. International Journal of Research in Engineering & Advanced Technology, 7 (4). pp. 8-12. ISSN 2320-8791

Jong, Lee Yee and Teo, DCL (2015) Concrete Containing Palm Oil Fuel Ash (POFA) and Oil Palm Shell (OPS) Subjected to Elevated Temperatures. UNIMAS e-Journal of Civil Engineering. ISSN 1984-3874

Jong,, Tze Kian. (2007) Quantitive measurements and modeling of microwave field intensity in the vicinity of cellular mobile network antennas. Masters thesis, Universiti Malaysia Sarawak.

Julian, Anak Gabriel Bain (2010) Effect of surcharge on stabilized peat soil from Sarawak. [E-LPTA] (Unpublished)

Julian Leslie, Anyie (2009) Development of temporal rainfall pattern for Sarawak. [E-LPTA] (Unpublished)

Jungan, F. (2000) An alternative wastewater treatment system for existing temporary UNIMAS campus. [E-LPTA] (Unpublished)

Jupiter, T. and Hj Rashidi, A. and Ismail, I. (2010) Effect of seawater on the properties of Epoxy Modified Concrete. UNIMAS E-Journal of Civil Engineering, 1 (2).

K

Kabit, M.R and Charles, P. and Fereirra, L. and Hojati, A.T (2011) Examination of Traffic Incident Records and Development of a Rapid Incident Response Plan. In: Australasian Transport Research Forum 2011 Proceedings, 28-30 September 2011.

Kamaluddin, S.Z (2009) Prediction of wave propagation, wind wave effects and energy dissipation nearshore of sungai Sarawak estuary. [E-LPTA] (Unpublished)

Karim, Abdul Razak Abdul and Quenneville, Pierre and M.Sa‘don, Norazzlina and Ingham, Jason (2013) Assessment Guidelines Of Wall-Diaphragm Connections For Masonry Buildings. In: Proceedings of the New Developments in Structural Engineering and Construction. New Developments in Structural Engineering and Construction, 2 . Research Publishing Services, pp. 1019-1024. ISBN 978-981-07-5354-2

Keli, H. (2006) A feasibility study on methods of construction over peat soils. [E-LPTA] (Unpublished)

Kenny Adams, Ajang. (2006) A study on silt and clay particles settling characterics in channels. [E-LPTA] (Unpublished)

Khairul Anwar, Bin Zukiflee (2010) Creep and shrinkage deformation of frp sheet strengthened reinforced concrete beam. [E-LPTA] (Unpublished)

Khairul Anwar, Mohamad Said and Genevieve Gadung, George and Nurul Ain, Mohamed Alipah and Nor Zakirah, Ismail and Ramizah Liyana, Jama'In (2016) Effect of activated carbon in PSF-PEI-Ag symmetric membrane. MATEC Web of Conferences, 87. ISSN 2261236X

Khairul Khuzaimah, Abdul Rahim (2006) Study on collection and transportation of waste in Kota Samarahan. [E-LPTA] (Unpublished)

Khaled M., Amtered El-Abidi and George, Ofori and Sharifah Akmam, Syed Zakaria and Md. Abdul, Mannan and Noor Faisal, Abas (2019) Identifying and Evaluating Critical Success Factors for Industrialized Building Systems Implementation: Malaysia Study. Arabian Journal for Science and Engineering, 2019. ISSN 2193-567X (Print) 2191-4281 (Online)

Khan, Adil H. and Al-Asad, Jawad F. and Latif, Ghazanfar (2018) Speckle suppression in medical ultrasound images through Schur decomposition. IET Image Processing, 12 (3). pp. 307-313. ISSN 17519659

Kho, John Han Shyan (2009) Properties of polystyrene concrete bricks with silica fume. [E-LPTA] (Unpublished)

Kho, Kenneth Wee Hong (2010) Calcium carbide waste (CCW) as cement replacement in concrete. [E-LPTA] (Unpublished)

Kho, Wendy Choon Yen. (2010) Computer simulation of building for lateral loading using css software. [E-LPTA] (Unpublished)

Khoo, Kian Hua (2011) Design of CMOS power amplier. [E-LPTA] (Unpublished)

Kok, Chin Chai and Chian, Haur Jong and Kai, Meng Tay and Chee, Peng Lim (2016) A perceptual computing-based method to prioritize failure modes in failure mode and effect analysis and its application to edible bird nest farming. Applied Soft Computing Journal, 49. pp. 734-747. ISSN 15684946

Kolay, P.K and Sii, H.Y and Taib, S.N.L. (2012) Compressibility characteristics of tropical peat using Rowe cell consolidation. World Journal of Engineering, 9 (4). pp. 277-284.

Kong, Wen Yee (2017) The effect of fibre cintent on water absorption and sorptivity of sago fibre reinforced concrete. [E-LPTA] (Unpublished)

Koon, Beng Ooi and Zou, Patrick X.W. and Mohammad Omar, Abdullah (2015) A Simulation Study of Passively Heated Residential Buildings. Procedia Engineering, 121. pp. 749-756. ISSN 1877-7058

Kopet, E.B (2002) Electromagnetic radiation concerning human health and environmental issues. [E-LPTA] (Unpublished)

Kueh, A.B.H. and Kho, V.T. (2019) Strut waviness and load orientation affected fracture toughness knockdown in biaxially woven square lattices. International Journal of Mechanical Sciences, 164. ISSN 0020-7403

Kuok, K.K (2004) Artificial neural networks for rainfall runoff modelling with special reference to Sg. Bedup catchment area. Masters thesis, Universiti Malaysia Sarawak, UNIMAS.

Kuok, Kelvin K.K and Mah, D.Y.S. and Imteaz, M.A and Kueh, S.M (2016) Comparison of future intensity duration frequency curve by considering the impact of climate change: case study for Kuching city. International Journal of River Basin Management, 14 (1). pp. 47-55. ISSN 1571-5124

Kwang, Q.W and Ting, S.N (2009) Adequacy of quality provision in standard forms of local and international construction contracts. UNIMAS E-Journal of civil Engineering, 1 (1).

L

Lai, Adriana Mook Kim (2009) Finite element (quasi-static) model of electrostatic microelectromechanical cantilever. Masters thesis, Universiti Malaysia Sarawak.

Lai, Koon Chun (2009) Performance analysis of a dielectric barrier discharge (DBD) plasma actuator. Masters thesis, Universiti Malaysia Sarawak.

Lai, S.H. (2005) Determination of composite friction factor and manning roughness coefficient for Discharge estimation in natural compound channels. PhD thesis, Faculty of Engineering.

Laja, D. (2006) Solid waste treatment and disposal for rural area. [E-LPTA] (Unpublished)

Latif anak, Yok (2005) The polished stone value of local aggregates in Sarawak and its performance on skidding resistance. [E-LPTA] (Unpublished)

Lau, Jing Teck (2017) A Study of Safe Yield Estimation at Tapah River on Water Availability for Water Treatment Plant. Masters thesis, UNIMAS.

Lau, P. C. and Teo, DCL and Mohammad, Abdul Mannan (2018) Mechanical, durability and microstructure properties of lightweight concrete using aggregate made from lime-treated sewage sludge and palm oil fuel ash. Construction and Building Materials, 176. pp. 24-34. ISSN 0950-0618

Lau, See Hung (2015) Development of a data-driven fuzzy system for evaluating ultimate tendon stress of externally prestressed beams. PhD thesis, Universiti Malaysia Sarawak, (UNIMAS).

Lau, See Hung (2010) Particle Image Velocimetry Analysis On Simple Soil-Structured Interaction. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Lau, Sie Huang. (2010) Design of the micro hydro power reservoir at kpg semulong ulu. [E-LPTA] (Unpublished)

Lau, Stephenie May Kei (2019) A Quantitative Evaluation Method for Standard Form of Contract in Malaysia. Masters thesis, Universiti Malaysia Sarawak.

Law, I.N. (2011) Impacts of barrage flushing and flooding-in operations on saline intrusion upstream. UNIMAS E-Journal of Civil Engineering, 2 (1).

Law, Ing Nguong (1999) Channel roughness of earthen channel for tropical conditions. [E-LPTA] (Unpublished)

Law, P.L and Ng, Chee Khoon and Ha, How Ung and Lau, Hieng Ho (2005) Analysis and Design of Jobs for Control of Cumulative Trauma Disorders: Plastic Forks/Spoons Packing Job. The Institution of Engineers, Malaysia, 66 (3). ISSN 0126-513X

Lawan, S.M and Abidin, W.A.W.Z and Chai, W.Y and Baharun, A. and Masri, T. (2013) The Status Of Wind Resource Assessment(Wra) Techniques, Wind Energy Potential and Utilisation In Malaysia and Other Countries. ARPN Journal of Engineering and Applied Sciences, 8 (12).

Lawan, S.M and Abidin, W.A.W.Z. and Lawan, A.M. and Mustapha, M. and Bichi, S.L. (2015) ANN and GIS-assisted methodology for wind resource assessment (WRA) in Sarawak. Jurnal Teknologi, 77 (12). pp. 75-80. ISSN 1279696

Lee, Cheng Yiew (2002) Cathodic protection of steel under different environment. [E-LPTA] (Unpublished)

Lee, Chin Hui (2000) Procedure for structural appraisal, repair and retrofitting of concrete structures. [E-LPTA] (Unpublished)

Lee, Daniel Kim Tee. (2003) Analytical study on simply supported rectangular slab with opening. [E-LPTA] (Unpublished)

Lee, Lin Jye (1998) A complex variable boundary element method (CVBEM) for solving seepage problems. [E-LPTA] (Unpublished)

Lee, Melissa May Syn (2019) Modeling on the Likelihood of Driving Errors Due to Distracted Driving Behaviour (DDB) Associated with Mobile Phone Usage in Malaysia. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Lee, Shyue Leong (2013) Engineering behavior of soil treated by chemical and electrokinetics. Masters thesis, Univerisiti Malaysia Sarawak, UNIMAS.

Lee, Wei Ming (2001) Design of a raft foundation for a 5 storey flat. [E-LPTA] (Unpublished)

Lee, Yee Yong and Mohd Fadhil, Md Din and Zainura Zainon, Bin Noor and Kenzo, Iwao and Shazwin, Mat Taib and Singh, Lakhveer and Nur Hafizah, Abd Khalid and Nickholas, Anak Anting and Eeydzah, Aminudine (2018) Surrogate human sensor for human skin surface temperature measurement in evaluating the impacts of thermal behaviour at outdoor environment. Measurement, 118. pp. 61-72. ISSN 0263-2241

Lee,, William Chu Ching. (1998) Thermal modelling and control of building temperature. Masters thesis, Universiti Malaysia Sarawak.

Lelly, Marini (2005) Finite cross section analysis for externally prestressed beams at ultimate flexure limit state. Masters thesis, Universiti Malaysia Sarawak.

Leong, Geok Teng (2019) Efficient Hydraulic Flushing Gate System for Managing Sedimentation in Open Drain. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Liang, Kah Hoh (1998) Some geotechnical properties of tropical peat soils. [E-LPTA] (Unpublished)

Lie, Meng Pang and Kai, Meng Tay and Chee, Peng Lim (2014) A New Monotonicity Index for Fuzzy Rule-based Systems. 2014 IEEE International Conference on Fuzzy Systems (FUZZ-IEEE).

Liew, Hon Choi (2010) Energy efficient electronic blind system for home windows. [E-LPTA] (Unpublished)

Liew, Yu Voon (2010) Long term deflection and cracking performance of palm shell aggregate concrete beam subjected to transverse loading. [E-LPTA] (Unpublished)

Liew,, Fui Fath (2006) Biomass conversions from agriculture waste; potiential of biomass resources in Sarawak. [E-LPTA] (Unpublished)

Liew,, Fui Kiew (2007) The relationship between the applied torque and stresses in post-tension structures. Masters thesis, Universiti Malaysia Sarawak.

Lim, Gee Zhiong (2009) Behavior of composite slab consisting of foam concrete and normal concrete. [E-LPTA] (Unpublished)

Lim, Hung Ling (2013) Seismic performance of low-rise precast concrete structure with different types of beam-column connections using nonlinear static pushover analysis. Masters thesis, Universiti Malaysia Sarawak.

Lim, L.L.P and Lynch, R.J (2011) Feasibility study of a photocatalytic reactor for in-situ groundwater remediation of organic compounds. Journal of Hazardous Materials, 194.

Ling, H. and Teo, DCL (2011) Lightweight Concrete Bricks Produced from Industrial and Agricultural Solid Waste. Sustainable Technologies (WCST).

Ling, I.H and Teo, DCL (2011) Reuse of Waste Rice Husk Ash and Expanded Polystyrene Beads as an Alternative Raw Material in Lightweight Concrete Bricks. International Journal of Chemical and Environmental Engineering, 2 (5). 328-332.. ISSN 2078-0737

Ling, J. A. and Then, Yi Lung and Yeow, You Kok and Ahmed, Jubaer and Zaidel, D. N.A. (2018) Tea leaves moisture prediction using one-port monopole sensor. Asia-Pacific Microwave Conference Proceedings, APMC. pp. 654-657. ISSN 978-153860640-7

Ling, John Heng Teck. (2017) Effect of strain rate on vane shear test. [E-LPTA] (Unpublished)

Lio, Gillan Siang Kwang (2012) Effect of roof ventilation on cooling performance of a building. Masters thesis, Universiti Malaysia Sarawak, UNIMAS.

Loh, E.K (2009) Finite element analysis on pepper brick strength. [E-LPTA] (Unpublished)

Loh, Ling Ping (2006) Finite element analysis of seepage flow under a sheet pile. [E-LPTA] (Unpublished)

Loh, Siew Ling (2019) Potential of StormPav Green Pavement System Incorporating Stormwater Management. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Loi,, Hie Ping. (2009) Investigation on the behavior of three dimensional steel building due to lateral loading using csc software. [E-LPTA] (Unpublished)

Loo, Soon Wah (2000) Comparison of flexural design between bs 8110 (1985) and aci 318 (1995). [E-LPTA] (Unpublished)

Lydia Kristen, Binti Edward Mongudal (2005) Modelling of reinforced concrete beam for flexural behaviour. [E-LPTA] (Unpublished)

M

M. O., Abdullah and S.F., Lim and S.F., Salleh and T. M., Tai and S. L., Leo and A. K., Umar (2011) Development of a small-scale reactor system for bioethanol production from agriculture waste geared towards small industries applications in Malaysia. Renewable Energy & Power Quality Journal. ISSN 2172-038X

M.D, Yusoff and N.I, Monieur and G.D, Airey (2010) The 2S2P1D - An Excellent Linear Viscoelastic Model. UNIMAS e-Journal of Civil Engineering, 1 (2).

M.J., Pender and T.B, Algie and N.M, Sa’don and R.P, Orense (2011) Snap-Back Testing for Estimation of Nonlinear Behaviour of Shallow and Pile Foundations. In: Proceedings of the Ninth Pacific Conference on Earthquake Engineering Building an Earthquake-Resilient Society , 14-16 April, 2011.

M.O, Abdullah (2012) Applied Energy: An Introduction. CRC Press .

Madhat Farouk, Abu-alnaeem and Ismail, Yusoff and Tham, Fatt Ng and Yatimah, Alias and May, Raksmey (2018) Assessment of groundwater salinity and quality in Gaza coastal aquifer, Gaza Strip, Palestine: An integrated statistical, geostatistical and hydrogeochemical approaches study. Science of The Total Environment, 615. pp. 972-989. ISSN 0048-9697

Madihi, A. (2006) Retrofit design on lighting system. [E-LPTA] (Unpublished)

Mah, D.Y.S. (2016) Flow characteristics of individual lot stormwater detention. Water Practice & Technology, 11 (4). pp. 721-727. ISSN 1751-231X

Mah, D.Y.S. (2016) Improving drowned drainage outlets with submerged orifices. Water Practice & Technology, 11 (4). pp. 849-856. ISSN 1751-231X

Mah, D.Y.S. (2016) River safe yield with the constraint of a contracted rectangular weir for surface water supply. Water Practice & Technology, 11 (4). pp. 712-720. ISSN 1751-231X

Mah, D.Y.S. and Ching, Vern Liow and Md Abdul, Mannan (2019) Application of StormPav Green Pavement System in a Government Buildings Redevelopment Scheme. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (9). pp. 723-727. ISSN 2278-3075

Mah, D.Y.S. and Malek, M.A. and Putuhena, Frederik Josep (2019) Digitizing Hydrological Patterns For River Traffic Safety. International Journal of Civil Engineering & Technology, 10 (6). pp. 263-271. ISSN 0976-6316 (Online)

Mah, D.Y.S. and Ong, Johnny King Ngu and Liew, Vernon and Wan Hashim, Wan Ibrahim (2018) Augmenting Drainage System in the Old Town of Kuching, Sarawak, Malaysia. International Journal of Engineering and Technology, 7 (3.18). pp. 36-39. ISSN 2227-524X

Mah, D.Y.S. and Onni Suhaiza, Selaman (2012) Sarawak river barrages and environmental quality. Universiti Malaysia Sarawak, (UNIMAS). ISBN 978-967-5527-36-4

Mah, D.Y.S. and Putuhena, F.J. (2014) Modelling of Dam-Weir Operations for Environmental Quality. UNIMAS e-Journal of Civil Engineering, 5 (1).

Mah, D.Y.S. and Siew, Ling Loh and Md Abdul, Mannan and Wan Hashim, Wan Ibrahim (2018) Modelling of Surface Permeation in Multiple-Orifice Permeable Road. International Journal of Engineering and Technology, 7 (3.18). pp. 40-43. ISSN 2227-524X

Mah, D.Y.S. and Tze, Chiat Ng and Putuhena, Frederik Josep (2018) Integrating Infiltration Facility to Urban Road Drainage. International Journal of Engineering and Technology, 7 (3.18). pp. 31-35. ISSN 2227-524X

Mah, D.Y.S. (2006) Flood hydrograph reconstructing for Sarawak kanan river using infoworks river simulation (RS). Masters thesis, Faculty of Engineering.

Mah, D.Y.S. (2011) Modelling of sea level rise and river system. Disaster Prevention and Management, 20 (2). pp. 108-114. ISSN 0965-3562

Mah, D.Y.S. (2011) Restoring nature in engineering structure: a modelling of Kuching bypass floodway. Journal Coastal Conservation, 15 (4). 565-571 . ISSN 1874-7841

Mah, D.Y.S. and Putuhena, F.J. and Rosli, N.A (2011) Modelling of flood flushing in a tributary constrained by barrages. World Applied Sciences Journal, 23 (1). pp. 101-108. ISSN 1818-4952

Mah, D.Y.S. and Salehe, A.H.M. and Putuhena, F.J. (2014) Water Sensitive Urban Design in Existing Urban Settings: Case Study of Dry Detention Pond in Kuching City. In: InCIEC 2013 Proceedings of the International Civil and Infrastructure Engineering Conference 2013. Springer Singapore, pp. 315-322. ISBN 978-981-4585-01-9

Mah, Kar Weng (2010) Case Study: Design and Development of Pico Hydro Power System for Underserved Community in Kampung Semulong Ulu. [E-LPTA] (Unpublished)

Mah, Kar Weng (2010) Case study : design and development of pico hydro power system for underserved community in kampung semulong ulu. [E-LPTA] (Unpublished)

Mah, Yau Seng and Kuok, Kelvin K.K and Teo, F.Y. (2016) Case study of exploited riparian corridors: rapid assessment of ecological health for riparian buffer width. International Journal of River Basin Management, 14 (1). pp. 57-64. ISSN 1571-5124

Mah, Yau Seng and Lai, S.H. and Chan, R.A.@R.B. and Putuhena, F.J. (2012) Investigative modelling of the flood bypass channel in Kuching, Sarawak, by assessing its impact on the inundations of Kuching-Batu Kawa-Bau Expressway. Structure and Infrastructure Engineering, 8 (7). pp. 705-714.

Mah, Yau Seng and Wan Hashim, Bin Wan Ibrahim and Lo, May Chiun and Ha, Shiaw-Tong (2019) Factors Affecting Satisfaction and Loyalty in Public Transport using Partial Least Squares Structural Equation Modeling (PLS-SEM). International Journal of Innovative Technology and Exploring Engineering, 8 (12). pp. 569-575. ISSN 2278-3075

Mah Yau Seng, Darrien (2017) Individual lot on-site stormwater detention underneath residential car porch. Universiti Malaysia Sarawak (UNIMAS), Kota Samarahan. ISBN 978-967-2008-45-3

Mahathir, Merjedi (2005) Factors affecting the workability of concrete incorporating PFA. [E-LPTA] (Unpublished)

Mahmood, Adnan and Hushairi, Zen and Al-Khalid, Othman (2013) A survey of vertical handover decision algorithms in fourth generation heterogeneous wireless networks. World Applied Sciences Journal, 28 (5). pp. 629-635. ISSN 1818-4952

Maniyan, S/O Rama (2010) Leaching studies of pulverised fuel ash from local thermal power plant. [E-LPTA] (Unpublished)

Maqueline Cyndi, Anak Nap (2010) Parametric study of retaining wall using plaxis. [E-LPTA] (Unpublished)

Marina, Patrick and Mah, D.Y.S. and Putuhena, Frederik Josep and Yin, Chai Wang and Onni Suhaiza, Selaman (2019) Constructing depth-area-duration curves using public domain satellite-based precipitation data. International Journal of Hydrology Science and Technology, 9 (3). pp. 281-302. ISSN 2042-7808 (Print)

Marlene Clarissa, Thomas Likup. (2006) Teamwork in civil engineering -past, present, and future. [E-LPTA] (Unpublished)

Maseri, H. and Selaman, O.S and Mannan, Mohammad Abdul and Taib, S.N.L. (2018) Performance of cylindrical detention pond (CDP) as depression storage under fully saturated condition. International Journal of Engineering & Technology, 7 (4). pp. 5996-6000. ISSN 2227-524X

Matarul, J. and Mannan, M. A. and Mohammad Ibrahim Safawi, M. Z. and Ibrahim, A. and Jainudin, N.A. and Yusuh, N.A. (2016) Performance-based Durability Indicators of Different Concrete Grades Made by the Local Ready Mixed Company: Preliminary Results. Procedia - Social and Behavioral Sciences, 224. pp. 620-625. ISSN 1877-0428

Md, Rezaur Rahman. (2011) Sustainable wood polymer composites improvement based on conventional and nanotechnological approaches. Masters thesis, Faculty of Engineering.

Md Abdul, Maleque and Saffina, W. and Ahmad, A.S and Mohammad Yeakub, Ali (2017) Fe-C-Si ternary composite coating on CP-titanium and its tribological properties. IOP Conference Series: Materials Science and Engineering, 184 (1). ISSN 17578981

Md Sahlan, M.K.A (2009) Management and disposal of clinical waste in Sarawak general hospital. [E-LPTA] (Unpublished)

Md. Eaqub, Ali and Md.M., Rahman and Th. S., Dhahi and Muhammad, Kashif and Md. Shaheen, Sarkar and Wan Jeffrey, Basirun and Hamid, SBA and Bhargava, Suresh (2016) Nanostructured Materials: Bioengineering Platforms for Sensing Nucleic Acids. Reference Module in Materials Science and Materials Engineering. pp. 1-26. ISSN 978-0-12-803581-8 (ISBN)

Md. Rezaur, Rahman and Md Mizanur, Rahman and Sinin, Hamdan and Md Faruk, Hossen and Chang, Josephine Hui Lai and Fui, Kiew Liew (2017) Effect of nanoclay and silica on mechanical and morphological properties of jute cellulose polyethylene biocomposites. Journal of Vinyl and Additive Technology, 23. E113-E118. ISSN 1083-5601

Mensan, Anak Gandai. (2005) Analysis of pile group. [E-LPTA] (Unpublished)

Mohamad, N. (2009) The use of pumping station in conjunction with Kuching barrage for flood mitigation. [E-LPTA] (Unpublished)

Mohamad Ayub, Bin Ishak (2004) The roof technologies at low cost houses and the effect on thermal performance : structures. [E-LPTA] (Unpublished)

Mohamad Hezan Andy, Bin Mohamad Sait (2005) Optimum mix design for concrete incorporating PFA from Sejingkat power station, Kuching. [E-LPTA] (Unpublished)

Mohamad Luqman Hakim, Bin Hashim Mohd. (2017) Synchronized earthwork, erosion and sedimentation control plan for construction site. [E-LPTA] (Unpublished)

Mohamad Raduan, Bin Kabit and Lee, Melissa May Syn and Norehan, Zulkiply and Zayn, Al-Abideen Gregory (2019) Modelling Driver Injury Severity at Signalized Intersections in Malaysia. Journal of Mechanics of Continua and Mathematical Sciences (4). pp. 288-299. ISSN 0973-8975

Mohamad Redza, Bin Ali Madan (2004) Testing of riveted cold-formed steel connections in bearing. [E-LPTA] (Unpublished)

Mohamed Sutan, Norsuzailina and N.I.A., Ideris and S.N. L., Taib and D.T.C., Lee and A., Hassan and S.K., Sahari and K.A., Mohamad Said and H. R., Sobuz (2017) Microstructural characterization of catalysis product of nano cement based materials. E3S Web of Conferences. ISSN https://www.e3s-conferences.org/ (In Press)

Mohammad, Masita and Ibrahim, Yakub and Zahira, Yaakob and Nilofar, Asim and Kamaruzzaman, Sopian (2018) Adsorption Isotherm of Chromium (VI) into Zncl2 Impregnated Activated Carbon Derived by Jatropha Curcas Seed Hull. IOP Conference Series: Materials Science and Engineering, 293 (1). pp. 1-6. ISSN 17578981

Mohammad Aliff, Abd Rahman (2018) Investigation of Oil Palm Harvesting Tools Design and Technique on Work Related Musculoskeletal Disorder. Masters thesis, Universiti Malaysia Sarawak.

Mohammad Azam, Bin Johari (2009) Compressibility behaviour of peat soil. [E-LPTA] (Unpublished)

Mohammad Ishamudin, Ismail (2006) Storm rainfall analysis for upper Rajang River Catchment. [E-LPTA] (Unpublished)

Mohammad Omar, Abdullah and Tan, Ivy Ai Wei and Lim, Leo Sing (2011) Automobile adsorption air-conditioning system using oil palm biomass-based activated carbon: A review. Renewable and Sustainable Energy Reviews, 15. pp. 2061-2072. ISSN 1364-0321

Mohammad Omar, Abdullah (2012) Essential notes on applied energy : for mechanical and chemical engineering students (objective, practical short questions & sample answers). Universiti Malaysia Sarawak. ISBN 978-967-5527-15-9

Mohammad Syuhaimi, Ab Rahman and Fazlinda, Ab Aziz and Noor Azie Azura, Mohd Arif and Abang Anuar, Ehsan and Kasmiran, Jumari (2009) Kesan Halaju Putaran Gilapan Terhadap Peratus Potongan Hujung Sisi Pandu Gelombang Polimer SU-8 di atas Substrat Silikon. Jurnal Kejuruteraan., 21. pp. 107-116.

Mohammad Syuhaimi, Ab-Rahman and Fazlinda, Ab-Aziz and Noor Azie Azura, Mohd Arif and Saiful Dzulkefly, Zan and Seri Mastura, Mustaza and Abang Anuar, Ehsan and Sahbudin, Shaari (2009) The study of the good polishing method for polymer SU-8 waveguide. Optica Applicata, 39 (3). pp. 459-465.

Mohammad Syuhaimi, Ab-Rahman and Noor Azie Azura, Mohd Arif and Sahbudin, Shaari (2011) Effect of Thermal Treatment on the Morphology of ZnS: Mn Nanocrystal. World Applied Sciences Journal, 12 (9). pp. 1505-1511. ISSN 1818-4952

Mohd Azkarmin, Bin Mohd Adenan (2010) Development of temporal rainfall patterns for Sabah and Sarawak. [E-LPTA] (Unpublished)

Mohd Faiz Jafni, bin Ahmad Mustafa (2014) Basic strength properties of oncosperma tigillarium at small clear. [E-LPTA] (Unpublished)

Mohd Fareez Edzuan, Abdullah and Sim Shu, Zhing and Clarence Bilong, Bugik (2016) Biodiesel unsaturation degree effects on diesel engine NOx emissions and cotton wick flame temperature. In: 2nd International Conference on Automotive Innovation and Green Vehicle AiGEV 2016, 2 August 2016 through 3 August 2016, Malaysia Automotive Institute (MAI) Cyberjaya, Selangor; Malaysia.

Mohd Firdaus, Abdul Razak (2009) Analysis of ammoniacal nitrogen in Sungai Maong Kiri. [E-LPTA] (Unpublished)

Mohd Muhaimin Rafiq, bin Abas, (2012) Reka bentuk struktur basikal transit dalam mengaplikasikan laminasi venir serat buluh. [E-LPTA] (Unpublished)

Mohd Nasrun, Mohd Nawi and Faizal, Baharum and Siti Halipah, Ibrahim and Riazi Mehdi, Riazi (2017) A review study of maintenance and management issues in Malaysian commercial building towards sustainable future practice. AIP Conference Proceedings, 1891 (1). ISSN 0094-243X

Mohd Rizal, Abdul Hamid (1999) End effector and trajectory working area of robot system. [E-LPTA] (Unpublished)

Mohd Yusri, Bin Suratman (2009) Analysis of slope stability using finite element method. [E-LPTA] (Unpublished)

Mohd. Effendi, Bin Abdullah. (2005) Thermal comfort for office work with special reference to Kuching area. [E-LPTA] (Unpublished)

Moses, Sondoh (2004) Experimental study on the effect of fly ash on mechanical properties of high strenght concrete. [E-LPTA] (Unpublished)

Muhammad Abdul Syahid, Bin Saari (2015) A STUDY ON THE BEHAVIOUR OF FRESH SELF-COMPACTING CONCRETE. Masters thesis, UNIMAS.

Muhammad Aiman, Bin Mat Ghani (2017) Investigating the row shear failure of bolted connection in Selangan Batu wood. [E-LPTA] (Unpublished)

Muhammad Faqih, Bin Mohd Jaafar (2017) High strength of bricks made up of POFA and fly ash as cement replacement. [E-LPTA] (Unpublished)

Muhammad Firdaus, Abong Abdullah and Mastika, Lamat and Abdul Reizal, Dim and Andrew Ragai Henry, Rigit (2008) Design Optimisation of a Search and Rescue Micro-Submarine. Working Paper. Universiti Malaysia Sarawak, (UNIMAS).

Muhammad Nor, Bin Hafidzi and Ahmad Kueh, Beng Hong and Norhidayah, Binti Rasin and Airil Yasreen, Bin Mohd Yassin and Hisham, Bin Mohamad (2011) Size Dependent Uniaxially Loaded Stability of Triaxial Weave Fabric Composites. Applied Mechanics and Materials, 94-96. pp. 1742-1745. ISSN 1662-7482

Muhammad Sadli, Bin Abdllah. (2006) Planning analysis for inland navigation developing in the Baram river using logical framework approach. [E-LPTA] (Unpublished)

Muhammad Syafik, Jumali. (2004) Small scale structural defects using vibration monitoring technique. [E-LPTA] (Unpublished)

Mulyani, Rini and Raudhah, Ahmadi and Pilakoutas, Kypros and Hajirasouliha, Iman and Taufik, , (2015) A multi-hazard risk assessment of buildings in Padang city. Procedia Engineering, 125. pp. 1094-1100. ISSN 18777058

Musa, J. (2002) Application of acoustic emission (AE) technique in various materials (metal, woods and bricks). [E-LPTA] (Unpublished)

N

N. Mohamed, Sutan and I., Yakub and M. S., Jaafar and K. A., Matori and S. K., Sahari (2015) Sustainable Nanopozzolan Modified Cement: Characterizations and Morphology of Calcium Silicate Hydrate during Hydration. Journal of Nanomaterials, 2015.

N. N., bin Mohd Daud and Mohamed Nasrun, bin Osman and Muhammad Ramlee, bin Kamarudin and Abdul Rahman, bin Kram and Muhammad Mokhzaini, bin Azizan (2017) A Compact Antenna Design for Fifth Generation Wireless Communication System. MATEC Web of Conferences, 140 (01009). pp. 1-4. ISSN 2261-236X

N.M, Sa’don and M.J., Pender and A.R., Abdul Karim and R.P, Orense (2014) Pile Head Cyclic Lateral Loading of Single Pile. Geotech Geol Eng, 32. pp. 1053-1064.

N.M., Sa’don and M.J., Pender and A.R., Abdul Karim (2014) Dynamic Soil Stiffness Between WAK, SASW and SCPT Tests. In: InCIEC 2013 Proceedings of the International Civil and Infrastructure Engineering Conference 2013. Springer Singapore, pp. 461-475. ISBN 978-981-4585-01-9

Nafisa, Tamanna (2015) Characterization of Pozzolanic Properties of Waste Glass as Partial Replacement of Cement. Masters thesis, University Malaysia Sarawak, UNIMAS.

Nagaratnam, Brabha H and Muhammad, Abdul Mannan and Muhammad Ekhlasur, Rahman and Abdul Karim, Mirasa and Richardson, Alan and Nabinejad, Omid (2019) Strength and microstructural characteristics of palm oil fuel ash and fly ash as binary and ternary blends in Self-Compacting concrete. Construction and Building Materials, 202. pp. 103-120. ISSN 0950-0618

Najwa, Binti Ismail. (2017) Behaviour of ground improvement techniques on embankment using plaxis 2D version 8.6. [E-LPTA] (Unpublished)

Namazi, Eshagh and Hisham, Bin Mohamad and Ahmad Kueh, Beng Hong and Mohsen, Hajihassani and Siti Norafida, Binti Jusoh and Khaili Abad, Seyed Vahid Alavi Nezhad (2012) Ground Behaviour Around a Tunnel Using Various Soil Models. Electronic Journal of Geotechnical Engineering, 17. pp. 609-622. ISSN 1089-3032

Nasser, R.Afshar and Efarina, A.Hamit (2015) RAINWATER HARVESTING IN KOTA SAMARAHAN. International Journal of Research in Engineering and Technology, 4 (2). ISSN 2321-7308

Nawi, M.N.M and Shaharanee, I.N.M and Hashim, K.F. and Azman, M.N.A. and Ibrahim, S.H. (2015) Qualitative analysis on the barriers of industrialised building system (IBS) uptake in Malaysian construction projects. Advanced Science Letters, 21 (6). pp. 2134-2138. ISSN 1936-6612

Nawi, M.N.M and Songappenm, M. and Nadarajan, Shanthi and Siti Halipah, Ibrahim and Mustapha, R. (2017) Procurement performance and supplier management measurement issues: A case of Malaysian private company. International Journal of Supply Chain Management, 6 (1). pp. 246-253. ISSN 20513771

New Sarawak Tribune (2013) UNIMAS holds engineering week 2013. [Newspaper Clipping] (In Press)

New Sarawak Tribune (2013) UNIMAS to organize Engineering Conference. [Corporate Memory] (In Press)

Ng, Ai Ping and Chiew, Kang Leng and Dayang Hanani, Binti Abang Ibrahim and Tiong, Wei King and Sze, San Nah and Nadianatra, binti Musa (2018) Android malware detection technique via feature analysis. Journal of Engineering Science and Technology, July. pp. 78-90. ISSN 1823-4690

Ng, CK (2005) Flexural strengthening of RC beams via external prestressing. In: International Conference on Concrete repair, Rehabilitation & Retrofitting, 21-23 November 2005.

Ng, CK and Wong, W.J and Marini, L. (2006) Finite section analysis of RC Beams prestressed with external tendons at ultimate limit state. In: -.

Ng, Cheehiong and Mannan, Mohammad Abdul and Kameswara Rao, N. S V (2016) Structural performance of precast floor panel using oil palm shell solid waste. Journal of Infrastructure Systems, 22 (4). ISSN 10760342

Ng, Suh Hong. (2002) Experimental investigation of the velocity distribution for a bendway weir. [E-LPTA] (Unpublished)

Ng, Wan Chi (2010) Development of ultra high strength concrete based on locally available materials and silica fume. [E-LPTA] (Unpublished)

Ngie, David Chua Sing and Shahrol, Mohamaddan and Shirley, Anak Jonathan Tanjong and Abdullah, bin Yassin and Lim, Soh Fong (2018) Detection of Bond Pad Discolorations at Outgoing Wafer Inspections. IEEE Transactions on Semiconductor Manufacturing, 31 (1). pp. 144-148. ISSN 0894-6507

Ngu, Johnny Ong King (2017) Fundamental Flow Characteristics of Individual Lot Stormwater Detention Underneath Residential Car Porch. Masters thesis, UNIMAS.

Ngu, Lock Hei. (2004) Development and performance test of a separation system for removal of physically emulsified and free oils from wastewaters. Masters thesis, Universiti Malaysia Sarawak, UNIMAS.

Nickholas, Anting and Mohd. Fadhil, Md. Din and Kenzo, Iwao and Mohanadoss, Ponraj and Karlvin, Jungan and Lee, Yee Yong and Lim, Alvin John Meng Siang (2017) Experimental evaluation of thermal performance of cool pavement material using waste tiles in tropical climate. Energy and Buildings, 142. pp. 211-219. ISSN 0378-7788

Nirlawina, Binti Mohamad Lazim. (2000) Design of a water distribution system for Gedong Rural Growth Center. [E-LPTA] (Unpublished)

Noor Suraya, Romali. (2006) Organic soil stabilization by different types of admixtures. [E-LPTA] (Unpublished)

Nor Aini, Rosli (2004) Limestone :an alternative material for road base and subbase. [E-LPTA] (Unpublished)

Nor Intan Zaharah, Binti Ahmad Zaidi (2017) Compressibility properties of fully saturated gypsum. [E-LPTA] (Unpublished)

Noraida, binti Razali (2014) Durability effect on stabilized subgrade soil. Masters thesis, Universiti Malaysia Sarawak, (UNIMAS).

Noraini, Asakil (2006) Finite elements on bond strenght of adhesive / polymeric composites system. [E-LPTA] (Unpublished)

Noraizah, Binti Ugang. (2006) Development of photoelastic experiment. [E-LPTA] (Unpublished)

Norazlin, Binti Ahmad. (2004) Analysis of laterally loaded pile. [E-LPTA] (Unpublished)

Norazlina, Bateni and Sai, Hin Lai and Putuhena, F.J. and Yau, Darrien Seng Mah and Md Abdul, Mannan and Ren, Jie Chin (2019) Hydrological Performances on the Modified Permeable Pavement with Precast Hollow Cylinder Micro detention Pond Structure. KSCE Journal of Civil Engineering, 23 (9). pp. 3951-3960. ISSN 1226-7988

Norazlina, Bateni and Sai, Hin Lai and Putuhena, Frederik Josep and Mah, D.Y.S. and Md Abdul, Mannan (2018) A Rainfall Simulator Used for Testing of Hydrological Performances of Micro-Detention Permeable Pavement. International Journal of Engineering and Technology, 7 (3.18). pp. 44-48. ISSN 2227-524X

Norazlina, Bateni. (2008) Nearshore wave analysis of Batu Pahat river estuary. [E-LPTA] (Unpublished)

Norazzlina, Binti M. S'adon and Abdul Razak, Bin Abdul Karim and Emilia Evyln, Christermaller and Mohamad Hanif, Bin Mohamad Ariffin and Albert Akun, Anak Merang (2018) Compressive Strength Development for Modified Peat using Rubber Crumb (RC) as Reinforcement with Electro-Kinetic Treatment (EKT). In: Innovation Technology Expo 2018 (InTEX 2018) Product Profile. Universiti Malaysia Sarawak, pp. 8-9. ISBN 978-967-5418-67-9

Norazzlina, Binti M.Sa’don and Abdul Razak, Abdul Karim and Siti Noor Linda, Binti Taib and Mahshuri, Binti Yusof (2018) Strength Properties of Reinforced Peat using Fiber-polyester and Shredded Rubber-Crumb as Reinforcement Material. International Journal of Engineering & Technology, 7 (3.18). pp. 26-30. ISSN 2227-524X

Norazzlina, Binti M.Sa’don and Abdul Razak, Bin Abdul Karim and Emilia Evelyn, Christermaller and Mohamad Hanif, Bin Mohamad Ariffin and Albert Akun, Anak Merang (2018) Electro-Kinetic Treatment (EKT) on Reinforced Peat with Nylon Fiber for the Sub-grade Layer Strengthening. In: Innovation Technology Expo 2018 (InTEX 2018) Product Profile. Universiti Malaysia Sarawak, Pullman Hotel, Kuching, Sarawak, pp. 14-15. ISBN 978-967-5418-67-9

Norazzlina, M.Sa'don and Abdul Razak, Abdul Karim and Siti Noor Linda, Taib and Mahshuri, Yusof (2017) Strength properties of reinforced peat using fiber- polyesterand shredded rubber-crumb as reinforcement material. In: UNIMAS Silver Jubilee Conference 2017, 18-20 October 2017, Pullman Hotel, Kuching.

Nordiana, Rajaee and Azham, Zulkharnain and Awang Ahmad Sallehin, Awang Hussaini (2016) Basic Architecture and Applications of DNA Computing. Transactions on Science and Technology, 3 (1-2). pp. 277-282. ISSN 2289-8786

Noridham, Mohamad. (2005) Experimental study on the high strength concrete with different fine aggregate. [E-LPTA] (Unpublished)

Norikhsan, Bin Haji Anuar (2006) Experimental study of fluid flow in a double L-bend pipe with small nozzle outlets. [E-LPTA] (Unpublished)

Norsuzailina, Mohamed Sutan and Sinin, Hamdan and Ibrahim, Yakub and Zainal, Abidin Talib (2014) Efflorescence Mitigation By Pozzolanic Industrial By-Products. Malaysian Journal of Civil Engineering, 26 (2).

Norsuzailina, Sutan and Hendry Adam, Jethro and Abdul Razak, Abdul Karim and Norazzlina, M Saidon and Yau Seng, Mah (2017) Manual of Open-Ended Laboratory (OEL) : Faculty of Engineering. Universiti Malaysia Sarawak (UNIMAS), Kuching, Sarawak. ISBN 978-967-2008-14-9

Norsuzailina, Mohamed Sutan and Sinin, Hamdan (2013) Efflorescence Phenomenon on Concrete Structures. Advanced Materials Research, 626. pp. 747-750.

Norsyathirah, Binti Mat Shoib (2017) Evaluating the bolted connection strength of Selangan Batu wood. [E-LPTA] (Unpublished)

Nuh Muizzuddin, Ahmad Fauzi. (2009) Properties of foam concrete with fixed percentage of expanded polystyrene. [E-LPTA] (Unpublished)

Nur Aliaa, Binti Mohamad (2017) Feasibility of measuring the undrained strength of peat in the direct shear box. [E-LPTA] (Unpublished)

Nurashyikin, Pauzi. (2009) Properties of polystyrene concrete block with fly ash. [E-LPTA] (Unpublished)

Nurdiani, Zamhari and Abang Annuar, Ehsan (2017) Large cross-section rib silicon-on-insulator (SOI) S-bend waveguide. Optik, 130. pp. 1414-1420. ISSN 00304026

Nurizatulsima, Binti Abdul Aziz. (2017) Durability study at different age groups of planted Acacia mangium superbulk species of Sarawak. [E-LPTA] (Unpublished)

Nurkhadizah, Binti Salleh (2017) Evaluating on properties of different grades bitumen using Strategic Highway Research Program (SHRP) test method. [E-LPTA] (Unpublished)

Nursalasawati, Binti Rusli and Ahmad Kueh, Beng Hong and Erwan Hafizi, Bin Kasiman (2011) Staggered Grid Computation of Fluid Flow with an Improved Discretisation of Finite Differencing. In: Informatics Engineering and Information Science: International Conference, ICIEIS 2011, 14-16 November 2011, Kuala Lumpur, Malaysia.

Nurul Fazilla, Binti Ahmadi. (2017) Proposed riverbank erosion protection of Sungai Bedengan. [E-LPTA] (Unpublished)

Nurul Nadzatul Farhana, Binti Abdul Halim (2017) Energy efficiency in Public Works Department (PWD) Samarahan Divisional building. [E-LPTA] (Unpublished)

Nurul Wahida, Azmi (2005) Effect of fine content on compaction characteristics of sand. [E-LPTA] (Unpublished)

Nyemas Dewi Pramita, Binti Aie (2017) Chemical stabilization of amorphous peat via cement and fly ash with lime. [E-LPTA] (Unpublished)

O

Ong, Chee Zen (2005) Slope stability analysis. [E-LPTA] (Unpublished)

Ong, E.Y.Y (1999) Kasami sequences for spread spectrum communications. [E-LPTA] (Unpublished)

Ong, Khin Kiat. (2005) Daily rainfall runoff modeling using artificial neural network for sungai Sarawak Kanan upper catchment. [E-LPTA] (Unpublished)

Oon, Y.W. and Chin, N.J. and Law, P.L (2011) Soil Erosion and Sediment Yield of a Sanitary Landfill Site - A Case Study. UNIMAS E-Journal of Civil Engineering, 2 (2).

P

Pang, Ching Ching (2005) The effectiveness of the performance appraisal system in department of civilaviation (DCA) Kuching, Sarawak. [E-LPTA]

Pender, M.J. and Wotherspoon, L. and Sa’don, N.M and Orense, R.P (2012) Macro element for pile-head cyclic lateral loading, Special Topics in Earthquake Geotechnical Engineering, Geotechnical. Geotechnical, Geological and Earthquake Engineering, 16 . SpringerLink. ISBN 978-94-007-2060-2 (online)

Perowansa, Parukaa and Mohd Kamal, Mohd Shah and Md Abdul, Mannan (2013) Influence of axial and oblique impact loads on crush response properties of square tube structures made with FRP pultruded composites. In: 2013 1st Malaysian International Tribology Conference, MITC 2013;, 18 November 2013 through 20 November 2013, Kota Kinabalu, Sabah; Malaysia.

Peter Bruwa, Ak Minah. (2004) Conceptual drainage improvement plans for the maong river catchment area. [E-LPTA] (Unpublished)

Phang, Hock Kim (2003) Study of flow characteristics in a non-symmetrical compound channel : smooth flood plain. [E-LPTA] (Unpublished)

Prabir, Kumar Kolay and Md Aminur, Rahman (2016) Physico-geotechnical properties of peat and its stabilisation. Proceedings of the Institution of Civil Engineers: Ground Improvement, 169 (3). pp. 206-216. ISSN 17550750

Prakash a/l, Vijaya Kumar (2005) Water quality study on rivers in Sarawak. [E-LPTA] (Unpublished)

Priscillina Anak Petrus, @ Petrus Igat. (2006) Methods of construction of modern house emphasizing on building thermal performance. [E-LPTA] (Unpublished)

Pua, Jia Yunn (2017) The use of recycled aggregate and fly ash for the production of pervious concrete. [E-LPTA] (Unpublished)

Pui, Tau Shien and H.N., Seneviratne and Dygku Salma, Awg Ismail (2011) A Study on Factors Influencing the Determination of Moisture Content of Fibrous Peat. UNIMAS E-Journal of Civil Engineering, 2 (2).

Punitha, Subbramaniam (2010) Performance of real time traffic in the ethernet and wlan using tcp and udp protocols. [E-LPTA] (Unpublished)

Putri, E.E and Kameswara Rao, N.S.V and Mannan, M.A. (2012) Evaluation of modulus of elasticity and modulus of subgrade reaction of soils using CBR test. Journal of Civil Engineering Research, 2 (1). pp. 34-40. ISSN 2163-2340 (online)

Putri, Elsa Eka and Kameswara Rao, N.S.V. and Md Abdul, Mannan (2017) Determination of pavement thickness based on threshold stress of the subgrade soil. International Journal of Civil Engineering and Technology, 8 (10). pp. 753-761. ISSN 09766308

Q

Quak,, Sek Jade @ Grace (2001) Simulation on linearity of fabry-perot semiconductor laser for radio over fibre system. Masters thesis, Universiti Malaysia Sarawak.

Quay, W.K (2009) Quality provisions in standard forms of local and international construction contract. [E-LPTA] (Unpublished)

Qurratu-Aini, Sirat and Dayangku Salma, Binti Awang Ismail and Azman, Bin Kassim and Ahmad Safuan, Bin A. Rashid (2018) Application of distributed optical fibre for shallow foundation. MATEC Web of Conferences, 250 (01019). pp. 1-12. ISSN 2557-0250

R

Rachel Rher, Anak Edwin (2017) Reducing sediments produced in horizontal slope drainage by using drain envelopes. [E-LPTA] (Unpublished)

Rafidah, Binti Ramli. (2017) Investigation of stabilized peat soil geomorphology via scanning electron microscopy. [E-LPTA] (Unpublished)

Rahman, Md Mizanur and Rahman, Md Rezaur and Sinin, Hamdan and Md Faruk, Hossen and Chang, Josephine Hui Lai and Fui, Kiew Liew (2017) Effect of silicon dioxide/nanoclay on the properties of jute fiber/polyethylene biocomposites. Journal of Vinyl and Additive Technology, 23 (1). E107-E112. ISSN 10835601

Rajaee, N. and Junaidi, E. and Taib, S.N.L. and Salleh, S.F. and Munot, M.A. (2013) Issues and Challenges in Implementing Outcome Based Education in Engineering Education. International Journal for Innovation Education and Research, 1 (4). pp. 1-9.

Ramli, M.R (2009) Geotechnical properties of peat soil. [E-LPTA] (Unpublished)

Ratman, Bin Naiman (2001) Comparison of excavation between sage crisp software and plaxis. [E-LPTA] (Unpublished)

Raudhah, Ahmadi and Nurulasma, A I Zainudin and Ismanizan, Bin Ismail and Mannan, M.A. and Ana Sakura, Zainal Abidin (2016) Micro Fine Sized Palm Oil Fuel Ash Produced Using a Wind Tunnel Production System. Advances in Materials Science and Engineering, 2016. pp. 1-6. ISSN 1687-8434

Robert, Perrin and Daniel, P. Elford and Luke, Chalmers and Gerry, M. Swallowe and Thomas, R. Moore and Sinin, Hamdan and Benjamin, J. Halkon (2014) Normal modes of a small gamelan gong. The Journal of the Acoustical Society of America, 136 (4).

Rohana, Sapawi (2017) Radio Frequency Wideband CMOS Power Amplifiers Design and Analysis. Universiti Malaysia Sarawak (UNIMAS), Kuching, Sarawak. ISBN 978-967-2008-26-2

Romilus, P. (2004) Effect of organic contents on the compaction and shear strength of soil. [E-LPTA] (Unpublished)

Roslan, Q. and Ibrahim, S.H. and Affandi, R. and Mohd Nawi, M.N. and Baharun, A. (2016) A literature review on the improvement strategies of passive design for the roofing system of the modern house in a hot and humid climate region. Frontiers of Architectural Research, 5 (1). pp. 126-133. ISSN 2095-2635

Rosli, M.F. and Rashidi, A. and Ahmed, E. and Sarudu, N.H. (2011) The Effect of Reinforcement, Expanded Polystyrene (EPS) and Fly Ash On The Strength of Foam Concrete. UNIMAS E-Journal of Civil Engineering, 2 (2).

Roziana, Binti Che Musa (2010) Comparison of theoretical total electron content (TEC) during disturbance. [E-LPTA] (Unpublished)

S

S.H., Ibrahim and Sia, W.K. and A., Baharun and M.N.M., Nawi and R., Affandi (2014) Thermal Performance of Oil Palm Fibre and Paper Pulp as the Insulation Materials. UNIMAS e-Journal of Civil Engineering.

Saaid, M.N.F and Ayob, M.A. and Yunus, A.I.A and Razali, A.W. and Maarof, K.A (2018) The Challenges of Space Management in Higher Education Institution. IOP Conference Series: Materials Science and Engineering, 429 (1). ISSN 1757-8981

Sabri, M.F.M. and Husin, M.H. and Chai, S.K. (2010) Development of a Timetabling Software Using Soft-computing Techniques With a Case Study. The 2nd International Conference on Computer and Automation Engineering (ICCAE), 2010. ISSN ISBN: 978-1-4244-5586-7

Sadia, Tasnim and Muhammad Ekhlasur, Rahman and Raudhah, binti Ahmadi (2018) Mechanical performance of modified cement paste made with micro-fine POFA in ammonium nitrate environment. Construction and Building Materials, 162. pp. 534-542. ISSN 09500618

Sahari, Z.R (2006) Modeling of human technical factors interrelationship in maintaining civilalian aircraft safety. [E-LPTA] (Unpublished)

Sahdi, F. and Gaudin, C. and White, D.J. (2013) Strength properties of ultra-soft kaolin. Canadian Geotechnical Journal. pp. 420-431.

Said, J.M. and Razali, I. (2009) Peat stabilization with carbide lime. UNIMAS E-Journal of civil Engineering, 1 (1).

Salisu, Muhammad Lawan and Wan Azlan, bin Wan Zainal Abidin (2018) Wind energy assessment and mapping using terrain nonlinear autoregressive neural network (TNARX) and wind station data. Cogent Engineering, 5 (1). ISSN 2331-1916

Salisu Muhammad, Lawan and Wan Azlan, Wan Zaina Abidinl and Thelaha, Bin Hj Masri and Chai, Wangyin and Baharun, Azhaili (2017) Wind power generation via ground wind station and topographical feedforward neural network (T-FFNN) model for small-scale applications. Journal of Cleaner Production, 143 (1). pp. 1246-1259. ISSN 09596526

Samson (2010) Investigation of water infliltration effect on unsaturated soil slope. [E-LPTA] (Unpublished)

Sebeli, K. (2009) Optimum mix of foamed concrete by using different materials. [E-LPTA] (Unpublished)

Sedik, Yahya and Hamdan, Sinin and Jusoh, Ismail and Hasan, Mahbub (2010) Acoustic Properties of Selected Tropical Wood Species. Journal of Nondestructive Evaluation March 2010, Volume 29, Issue 1, pp 38-42.

See, Hung Lau and Tay, Kai Meng and Chee, Khoon Ng (2013) Monotonicity preserving SIRMs-connected fuzzy inference systems with a new monotonicity index: Learning and tuning. Fuzzy Systems (FUZZ), 2013 IEEE International Conference. pp. 1-7. ISSN 1098-7584

Seibu Mary, Jacob (2010) Facilitating Critical Thinking In Asynchronous Problem Solving Sessions : A Study Of First Year University Engineering Mathematics. PhD thesis, Universiti Malaysia Sarawak (UNIMAS).

Selaman, Onni Suhaiza bt. (2007) Flood estimation at ungauged river basins in Sarawak by regionalisation technique. PhD thesis, Universiti Malaysia Sarawak.

Seniorita Bandy, Ak Kerungan @ Engkasan (2018) Solar Potential and Photovoltaic System Capacity Estimation for Sarawak based on Empirical Model and r.sun Module in GRASS. Masters thesis, Universiti Malaysia Sarawak.

Sepawi, I. (2005) Seminar on finite element analysis and design of RC buildings, 25-26th May 2005. In: Seminar on finite element analysis and design of RC buildings, 25-26th May 2005.

Seri, A. (2004) A study on the existing physical environment of the proposed Sungai Batu Resort, Lundu. [E-LPTA] (Unpublished)

Shafrida, Sahrani and Tatsuya, Akata and Michiko, Kuroda (2013) FDTD method for the analysis of the EM field from a moving source. Asia-Pacific Microwave Conference Proceedings. pp. 288-290.

Shahrol, Mohamaddan and Case, Keith (2016) Crowd simulation: a video observation and agent-based modelling approach. International Journal of the Digital Human, 1 (3). ISSN 2046-3383

Shahrul Niza, Bin Mokhatar and Redzuan, Bin Abdullah and Ahmad, Kueh Beng Hong (2013) Computational impact responses of reinforced concrete slabs. Computers and Concrete, 12 (1). pp. 37-51. ISSN 1598-8198

Shaikuthali, S.A. and Mannan, Mohammad Abdul and Dawood, Eethar Thanon and Teo, DCL and Raudhah, Ahmadi and Idawati, Ismail (2019) Workability and compressive strength properties of normal weight concrete using high dosage of fly ash as cement replacement. Journal of Building Pathology and Rehabilitation, 4 (26). ISSN 2365-3159 (Print)

Shamsiah, Binti Suhaili and Takahiro, Watanabe (2016) High throughput evaluation of SHA-1 implementation using unfolding transformation. ARPN Journal of Engineering and Applied Sciences, 11 (5). pp. 3350-3355. ISSN 1819-6608

Sharifah Azmin, Wan Hossen. (2009) Sediment yield accumulation at reservoir (Batang Ai Dam). [E-LPTA] (Unpublished)

Shawn, Mckenzie (2012) Application of pavement condition index (PCI) assessment method for rural road maintenance in Kuching-Samarahan area. Masters thesis, Faculty of Engineering.

Sherra Bellina, Barrabas and Rubiyah, Baini and Norsuzailina, Mohamed Mohamed Sutan and Yakub, Ibrahim and Khairul Anwar, Mohamad Said and Nur Syuhada, Ahmad Zauzi and Noraziah, Abdul Wahab and Hapiszul, Sulaiman (2016) HC-SCR: NOx Reduction using Mn and Cu Catalysts Impregnated in Coconut and Palm Kernel Shell Activated Carbon. MATEC Web of Conferences, 87. ISSN 2261236X

Shif Rizal, bin Abd. Malik (2002) The usage of system dynamics simulation software to model shop floor operations. [E-LPTA] (Unpublished)

Shyue, Leong Lee and Mohammad, Abdul Mannan and Wan Hashim, Bin Wan Ibrahim (2018) Polishing resistance of polymer concrete pavement using limestone aggregate. International Journal of Pavement Engineering. pp. 1-10. ISSN 1477-268X

Sia, C.C.V (2009) Development and fabrication on the oil palm fiber/ glass reinforced in aluminium composite laminates. Masters thesis, Universiti Malaysia Sarawak, UNIMAS.

Sia, Pik Soon (2008) Evaluation on PWD 75, standard form of general conditions of contract in Sarawak. Masters thesis, Universiti Malaysia Sarawak.

Sie, Hie Ing (2004) Parametric study on the load bearing capacity of lightweight steel framing system. [E-LPTA] (Unpublished)

Sim, Nee Ting and Wei, Kiet Hu (2013) Comparative study of structural steel and reinforced concrete construction methods : a Malaysian case study. Universiti Malaysia Sarawak.

Siti, Nikmatin and Bambang, Hermawan and Irmansyah, Irmansyah and Mohammad, Nur Indro and Ahmad Kueh, Beng Hong and Achmad, Syafiuddin (2018) Evaluation of the Performance of Helmet Prototypes Fabricated from Acrylonitrile Butadiene Styrene Composites Filled with Natural Resource. Materials, 12 (34). pp. 2-12. ISSN 1996-1944

Siti Fauziah, bt Samsudin (2000) Brickwork testing on locally produced cement sand brick-laboratory testing. [E-LPTA] (Unpublished)

Siti Halida, Ahmad and Nordiana, Rajaee and Sharifah Masniah, Wan Masra and Norhuzaimin, Julai and Rohana, Sapawi and Siti Kudnie, Sahari (2005) Nonlinear filtering for impulsive noise reduction. (Unpublished)

Siti Halipah, Binti Ibrahim and M. N. S., Suri and Khatijah, Binti Yaman and R., Abdul Wahab and Jethro, Anak Henry Adam (2018) Low-Cost Tap Water Purification System (Loco Device). In: International UNIMAS STEM Engineering Conference 2018, "Realizing The 4th Industrial Revolution In Engineering And Built Environment", 12 – 13 September 2018, Kuching, Sarawak..

Siti Halipah, Binti Ibrahim and Nurul Izzati, Binti Ahmat Ibrahim and Julaihi, Bin Wahid and Nurakmal Abdullah, @ Goh Tuo Ho and Dona Rose, Binti Koesmeri and Mohd Nasrun, Bin Mohd Nawi (2018) The Impact Of Road Pavement On Urban Heat Island (UHI) Phenomenon. International Journal of Technology, 8. pp. 1597-1608. ISSN 2086-9614

Siti Halipah, Binti Ibrahim and Qairuniza, Binti Roslan and Rohaida, Binti Affandi and Abdul Wafi, Bin Razali and Yon Syafni, Binti Samat and Mohd Nasrun, Bin Mohd Nawi (2018) Study On The Optimum Roof Type With 30° Roof Angle To Enhance Natural Ventilation And Air Circulation Of A Passive Design. International Journal of Technology, 8. pp. 1692-1701. ISSN 2086-9614

Siti Halipah, Ibrahim and Julaihi, F. and Azhaili, Baharun and Koesmeri, D.R. and Mohd Nasrun, Bin Mohd Nawi (2018) Investigating the Performance of Indoor Environment and Energy Management Implementation System in Office Building. Ekoloji, 27 (106). pp. 87-94. ISSN 1300-1361

Siti Nor Linda, Binti Taib and Striprabu, Strimari and Fauziah, Binti Ahmad and Foo, Kelvin Chin Yen and Khor, Brandon Ling Seong (2018) Study On Influence Of Moisture Content In Cement Stabilized Serian Soil. MCRJ Special Issue, 5 (3). pp. 174-183. ISSN 2590 - 4140

Siti Salmiah, Bt Ayub (2009) Ergonomics study of tablet arm chair in tutorial room engineering faculty. [E-LPTA] (Unpublished)

Siti Zarini Binti, Mohamed Jizi (2009) Modified cement system :durability and aesthetic. [E-LPTA] (Unpublished)

Sitihanafiah, Binti Ruasin (2006) Design of a single storey using steel structural elements. [E-LPTA] (Unpublished)

Sohiful Anuar, Zainol Murad and Mohd Najib, Mohd Yasin and Faizah, Abu Bakar and Norhawati, Ahmad and Rohana, Sapawi (2015) A 2.4 GHz Two Stage CMOS Class-F Power Amplifier for Wireless Applications. In: The Electronic And Green Materials International Conference 2015 (Egm2015), Surabaya, Indonesia.

Sri Rumi Melanos, Bin Basri (2005) The effect of different pitch of the roof for ventilation. [E-LPTA] (Unpublished)

Stephen Law, T.M (2009) Water Demand Forecasting Using Artificial Neural Network For Housing Estate-Case Study. [E-LPTA] (Unpublished)

Striprabu, A/L Strimari (2018) Behaviour of Sarawak Clayey Soil using Various By-Product Additives Stabiliser for Potential Subgrade Materials. Masters thesis, Universiti Malaysia Sarawak.

Striprabu, S. and Siti Noor Linda, Taib and Norazzlina, M.Sa'don and Fauziah, Ahmad (2018) Chemical Stabilization of Sarawak Clay Soil with Class F Fly Ash. Journal of Engineering Science and Technology, 13 (10). pp. 3029-3042. ISSN 1823-4690

Su, Kenneth Swee Kwang (2009) Durability Consideration Of Expanded Polystyrene (EPS) Concrete. [E-LPTA] (Unpublished)

Su, M.C.H (2010) Prospect of biodiesel production from waste oil and fat in Malaysia. [E-LPTA] (Unpublished)

Suhaida, Binti Sulong (2004) The influence of speed tables on urban arterial road : a case study in Padungan street, Kuching city. [E-LPTA] (Unpublished)

Suhaila, Bt. Mahamod (2010) Modelling of the operations of flood diversion barrage during dry season. [E-LPTA] (Unpublished)

Suhaili, S. and Watanabe, T. (2016) Design of Optimized Pipelined RIPEMD-160 with High Frequency and Throughput. Journal of Advanced Research in Computing and Applications, 3 (1). pp. 18-28. ISSN 2462-1927

Suriani, Binti Mohamad Kameri. (2004) The competition of public transport : implementation of new bus using stated preference technique. [E-LPTA] (Unpublished)

Syahrun Neizam, Bin Mohd Dzulkifli and Abd Halid, Bin Abdullah and Lee, Yee Yong and Mohd Mahathir, Bin Suhaimi Shamsuri and Zawawi, Bin Daud (2018) Classification of Potential Risk Factors through HIRARC Method in Assessing Indoor Environment of Museums. International Journal of Integrated Engineering, 10 (8). pp. 43-55. ISSN 2600-7916

Syazie Nordzaima, Binti Ali Mohamad. (2011) Potential And Properties Of Seawater Desalination In Pulau Salak. Masters thesis, UNIMAS.

Syed Almunir, Bin Mohd Zarak (2009) Solid Waste Generation And Composition In UNIMAS Cafeterias. [E-LPTA] (Unpublished)

Sze, S.N and Dorrell, D.G and Cossar, C. (2012) Design and Operation of Very Slow-Speed Generators for a Bristol Cylinder Sea Wave Generating Device. In: Energy Conversion Congress and Exposition (ECCE), 2012 IEEE, 15-20 Sept. 2012.

T

Taharah, Binti Edin (2016) An Experimental Investigation of Biodiesel from Jatropha Oil as a Green Fuel for Diesel Engine. Masters thesis, UNIMAS.

Tan, Chan Boon (2002) Structural design of a reinforced concrete floating pontoon with an access walkway. [E-LPTA] (Unpublished)

Tan, Choon Hong. (2017) Compressive strength, splitting tensile strength and water absorption of sago fibre reinforced concrete. [E-LPTA] (Unpublished)

Tan, I. A. W. and Abdullah, M.O and Lim, L.L.P. and Yeo, T.H.C. (2017) Surface Modification and Characterization of Coconut Shell-Based Activated Carbon Subjected to Acidic and Alkaline Treatments. Journal of Applied Science & Process Engineering, 4 (2). ISSN 2289-7771

Tan, I.A.W and Wu, W.H and Chan, R.A and Lim, L.L.P (2014) Effect of Mercerization and Acetylation on Properties of Coconut Fiber and its Influence on Modified Bitumen. UNIMAS e-Journal of Civil Engineering, 5 (1). ISSN 1985-3874

Tan, James Yiaw Beng (2012) Optimization of the hidden layer of a multilayer perceptron with backpropagation (bp) network using hybrid k-means-greedy algorithm (kga) for time series prediction. Masters thesis, Universiti Malaysia Sarawak.

Tan, Jerren Yun Ping. (2016) Traditional Procurement Route Selection Guideline for Construction Projects in Malaysia. Masters thesis, UNIMAS.

Tan, K.E (2009) Durability consideration of foamed concrete. [E-LPTA] (Unpublished)

Tan, Kok Chuan (2010) Evaluation of bitumen modified properties by adding up carbide lime as an addictive material. [E-LPTA] (Unpublished)

Tan, Kok Kui (1999) Reinforced concrete beam design by mathcad based on BS8110. [E-LPTA] (Unpublished)

Tan, Yie Hua and Mohammad Omar, Abdullah and Cirilo, Nolasco-Hipolito (2015) The potential of waste cooking oil-based biodiesel using heterogeneous catalyst derived from various calcined eggshells coupled with an emulsification technique: A review on the emission reduction and engine performance. Renewable and Sustainable Energy Reviews, 47. pp. 589-603. ISSN 1364-0321

Tan, Yiehua and Mohammad Omar, Abdullah and Cirilo Nolasco, Nolasco-Hipólito and Nur Syuhada, Ahmad Zauzi and Wong, Georgie Abdullah (2017) Engine performance and emissions characteristics of a diesel engine fueled with diesel-biodiesel-bioethanol emulsions. Energy Conversion and Management, 132. pp. 54-64. ISSN 01968904

Tay, Guan Heng (1999) Design of a water supply system for Sarawak National Youth Training Institute. [E-LPTA] (Unpublished)

Tay, K.M and Chian, H.J and Chee, P.L (2014) A clustering-based failure mode and effect analysis model and its application to the edible bird nest industry. Neural Computing and Applications, 26 (3). ISSN 1433-3058

Tay, Kai Meng (2015) An Analytical Interval Fuzzy Inference System for Risk Evaluation and Prioritization in Failure Mode and Effect Analysis. IEEE Systems journal (99). pp. 1-12. ISSN 1932-8184

Tay, Kai Meng and Liew, Meng Pang and Chee, Peng Lim (2016) Monotone Fuzzy Rule Relabeling for the Zero-Order TSK Fuzzy Inference System. IEEE Transactions on Fuzzy Systems, 24 (6). pp. 1455-1463. ISSN 1063-6706 (In Press)

Tay, Kai Meng and Liew, Meng Pang and Tze, Ling Jee (2013) A New Framework With Similarity Reasoning and Monotone Fuzzy Rule Relabeling for Fuzzy Inference Systems. IEEE International Conference on Fuzzy Systems (FUZZ), 2013. ISSN 1098-7584

Tee, Peifang and Mohammad Omar, Abdullah and Tan, I.A.W. and Mohamed Afizal, Mohamed Amin and Cirilo Nolasco, Nolasco-Hipólito and Kopli, Bin Bujang (2017) Effects of temperature on wastewater treatment in an affordable microbial fuel cell-adsorption hybrid system. Journal of Environmental Chemical Engineering, 5 (1). pp. 178-188. ISSN 22133437

Teh, T.K (2009) Durability of epoxy concrete under Malaysian atmosphere. [E-LPTA] (Unpublished)

Tengku Hasbullah, T.N.A and Selaman, O.S and Rosli, N.A (2014) Removal of Methylene Blue from Aqueous Solutions using Chemical Activated Carbon Prepared from Jackfruit (Artocarpus heterophyllus) Peel Waste. UNIMAS e-Journal of Civil Engineering, 5 (1).

Teo, DCL and Ling, I.H (2011) Properties of EPS RHA lighweight concrete bricks under different curing conditions. Construction and Building Materials, 25 (8). pp. 3648-3655.

Teo,, Wee Chai (2009) A study on suitable habitat for swiftlet farming. [E-LPTA] (Unpublished)

Terence, Jerome Daim. (2006) Mini service provider. [E-LPTA] (Unpublished)

Tey, N.W (2009) Improvement design of solar chimney. [E-LPTA] (Unpublished)

The Borneo, Post (1999) Foreign firms to expand operations in S'wak. -. (In Press)

The Star (2013) A feather in the cap. [Corporate Memory] (In Press)

The Star, Sarawak (2013) International engineering conference in July. [Corporate Memory] (In Press)

Timmy, Jupiter. (2009) Properties of expoxy concrete. [E-LPTA] (Unpublished)

Ting, Ing Ing. (2003) Environmental impact assesment study of a proposed housing development project. [E-LPTA] (Unpublished)

Ting, S.N and Khoo, H.K (2004) Project Management Development in Malaysia : A case study. In: Australian Institute of Project Management Conference, 10-12 October 2004.

Ting, Sie King (2008) Optimizing peak reduction carriers for OFDM based broadband systems. Masters thesis, Universiti Malaysia Sarawak, (UNIMAS).

Ting, Wee Kiet and Alsidqi, Hasan and Fauzan, Bin Sahdi and Siti Noor Linda, Binti Taib and Norsuzailina, Binti Mohamed Sutan and Badhrulhisham, Bin Abdul Aziz and Fourie, Andy (2017) A Narrow Wall System to Capture Temperature-Stress-Strain Behavior in Paste Backfill. Geotechnical Testing Journal. pp. 1-38. ISSN 1945-7545

Ting, Wee Kiet and Alsidqi, Hasan and Fauzan, Bin Sahdi and Siti Noor Linda, Binti Taib and Norsuzailina, Binti Mohamed Sutan and Badrulhisham, Bin Abdul Aziz (2018) Interfacial friction behaviour in narrow wall paste backfill system. MCRJ Special Issue, 5 (3). pp. 52-56. ISSN 2590 - 4140

Ting`, Wee Kiet (2019) Stress-Strain-Temperature Behaviour of Deposited Cemented Slurry. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Tiong, Alex Mee Kuei (2000) Shear strength of reinforced concrete beams strengthened with external reinforcement. [E-LPTA] (Unpublished)

Tsen, S.F (2006) Analisis of the process for traditional general contracting in Sarawak Malaysia. [E-LPTA] (Unpublished)

Tsen, Soo Fui. (2006) Analisis of the tender process for traditional general contracting in Sarawak Malaysia. [E-LPTA] (Unpublished)

Tze, Ling Jee and Kok, Chin Chai and Kai, Meng Tay and Chee, Peng Lim (2014) Building Fuzzy Inference Systems with Similarity Reasoning: NSGA II-based Fuzzy Rule Selection and Evidential Functions. In: 2014 IEEE International Conference on Fuzzy Systems (FUZZ-IEEE).

Tze, Ling Jee and Tay, Kai Meng (2012) Enhancing a Fuzzy Inference System-Based Criterion-referenced Assessment with an Analogical Reasoning Schema. Procedia - Social and Behavioral Sciences, 56. pp. 12-21. ISSN 1877-0428

U

Universiti Malaysia Sarawak, Faculty of Engineering (2000) Discussion to improve soil lab, 2000. [Image] (Unpublished)

Universiti Malaysia Sarawak, Faculty of Engineering (2008) Embracing “OBE” in Engineering Education, Vol. 2 (2007/2008). [Magazine and Newsletter]

Universiti Malaysia Sarawak, Faculty of Engineering (2007) FENG Research Bulletin - Vol.1 Oct. 2007. [Magazine and Newsletter]

Universiti Malaysia Sarawak, Faculty of Engineering (2008) FENG Research Bulletin – volume 2 : November 2008. [Magazine and Newsletter]

Utusan Borneo (2013) UNIMAS anjurkan Persidangan Kejuruteraan Antarabangsa. [Corporate Memory] (In Press)

Utusan Malaysia (2013) UNIMAS menang dua gelaran juara dalam Simposium Kejuruteraan. [Corporate Memory] (In Press)

Utusan Sarawak (2013) UNIMAS ngelancharka Program Minggu Injiner. [Newspaper Clipping] (In Press)

Utusan Sarawak (1997) UNIMAS bantu lahirkan banyak jurutera. [Newspaper Clipping] (In Press)

V

Vincent, M. and Pometto III, A.L. and Leeuwen, J.V. (2014) Ethanol production via simultaneous saccharification and fermentation of sodium hydroxide treated corn stover using Phanerochaete chrysosporium and Gloeophyllum trabeum. Bioresource Technology, 158. pp. 1-6.

Voon, Peter (2010) Comparison of parallel prefix adder (PPA). [E-LPTA] (Unpublished)

Voon, Siaw Chee (2001) Analysis and design of structural elements for a 5-storey flat. [E-LPTA] (Unpublished)

Voon Pai, B. and Abidin, W.A.W.Z and Zen, H. and Masri, T. and Abdullah, M. (2011) Open Space Mathematical Model for the Mobile Satellite L-Band Signal in Sarawak using Global Positioning System Technology. IEEE International Conference on Space Science and Communication (IconSpace), 2011. ISSN ISBN: 978-1-4577-0564-9

W

W.L., Freddy Kho and J., Sentian and Radojevic, M. and C.L. , Tan and P.L. , Law and S. , Halipah (2007) Computer simulated versus observed NO2 and SO2 emitted from elevated point source complex. International Journal Environmental Science Technology, 4 (2). pp. 215-222. ISSN 1735-1472

Walter, Y.L (2008) Proposed Rainwater Direct Storage for Faculty of Engineering In UNIMAS. [E-LPTA] (Unpublished)

Wan Ahmad, W.A.A (2008) Compression bending test for pvc pipe. [E-LPTA] (Unpublished)

Wan Ahmad, W.F (2009) Extreme rainfall patterns for sg. Sarawak and Samarahan river basins. [E-LPTA] (Unpublished)

Wan Hairul Azhar, Bin Wan Husein. (2000) The evolution of core house case area : Taman sukma Rancangan Perumahan Rakyat Siol Kanan. [E-LPTA] (Unpublished)

Wan Hanna Melini, Wan Mohtar and Haitham, Afana and Ahmed, El-Shafie and Hin, Charles Joo Bong and Aminuddin, Ab Ghani (2018) Influence of bed deposit in the prediction of incipient sediment motion in sewers using artificial neural networks. Urban Water Journal, 15 (4). pp. 1-7. ISSN 1573062X

Wan Nadzri, Osman and Mohd Nasrun, Mohd Nawi and Rohaizah, Saad and Herman Shah, Anuar and Siti Halipah, Ibrahim (2016) A proposal for improving sustainability practice through the implementations of reuse and recycle technique in Malaysian construction industry. AIP Conference Proceedings, 1761. ISSN 0094243X

Wilmi, Anak Nyokiew (2006) The investigation into quantifying optimum viscosity of scc mix design. [E-LPTA] (Unpublished)

Wong, K.K (2002) Parametic study on ductility of RC beams strengthened with external reinforcement. Masters thesis, Faculty of Engineering.

Wong, Kiew Chin (2010) Diesel - saline water separation by coalescence plate. [E-LPTA] (Unpublished)

Wong, L.G (2009) Characteristics of laminated flooring materials. [E-LPTA] (Unpublished)

Wong, Leong Sing. (2004) The effectiveness of 3 types of physical traffic calming device : which is most relevant at reducing traffic speeds. [E-LPTA] (Unpublished)

Wong, Ngie Bing (2004) Assessment of hydraulic systems for coastal wetland development in Asajaya, Kota Samarahan. [E-LPTA] (Unpublished)

Wong, Sia Siang (2017) The effect of fibre content on the split tensile strength of sago fibre reinforced concrete. [E-LPTA] (Unpublished)

Wong, Sie Kwong (2003) Flexural resistance in rectangular concrete beam with maximum tension reinforcement. [E-LPTA] (Unpublished)

Wong, Woan Jiuan (2006) Modelling and parametic study of externally presstressed beams at ultimate limit state. Masters thesis, Universiti Malaysia Sarawak, (UNIMAS).

Wong,, Kristy (2006) A baseline study on the impact of hazel for air polution mitigation. [E-LPTA] (Unpublished)

Y

Yau, Darrien Seng Mah and Putuhena, F.J. and Nor Azalina, Rosli (2014) Environmental Technology: Potential of Merging Road Pavement with Stormwater Detention. Journal of Applied Science & Process Engineering, 1 (1). ISSN 2289-7771

Yeo, C.C (2010) Mechanical testing on welded pipes. [E-LPTA] (Unpublished)

Yeong,, Choong Li (2009) Study of replacement of sand using foam concrete. [E-LPTA] (Unpublished)

Yi, Wen Kerk and Kai, Meng Tay and Chee, Peng Lim (2014) A New Interval-based Method for Handling Non-Monotonic Information. 2014 IEEE International Conference on Fuzzy Systems (FUZZ-IEEE).

Yiau, S.S. and F.J., Putuhena (2011) Probable Maximum Precipitation (PMP) Analysis for Bakun Dam Area. UNIMAS E-Journal of Civil Engineering, 2 (2).

Yogetasri, A/P Jeyapalan (2010) Preparation and characterization of zirconium based magnetic particles. [E-LPTA] (Unpublished)

Yong, K.S (2004) An analytica study of sand drain. [E-LPTA] (Unpublished)

Yong, L. and Suaidi, M.K and Pgn. Hj. Yusof, A.A.R (2005) Composite triple beat reduction using the golomb ruler. In: The IASTED International Conference on Optical Communication Systems & Network, 19-21 July 2005.

Yong, L.K. and Law, P.L and Taib, S.N.L. and Mah, D.Y.S. and Johari, A.H. (2018) Refinement of Topographical Factor For Estimating Soil Loss and Sediment Yield in Equatorial Regions. Journal of Civil Engineering, Science and Technology, 9 (2). ISSN 2462-1382

Yong, Leong Kong (2018) The Development of Equatorial Soil Loss and Sediment Yield Equations. Masters thesis, Universiti Malaysia Sarawak.

Yong, P.C and Razali, I. and Teo, DCL (2009) Utilisation of recycled aggregate as coarse aggregate in concrete. UNIMAS E-Journal of civil Engineering, 1 (1).

Yong, Shirley Xiao Wei (2010) Artificial neural network (ANN) modeling & validation to predict compression index of tropical soft soil. [E-LPTA] (Unpublished)

Yu, Guan Sing. (2001) Alumminium welding and it's effect on changing of mechanical properties of the base metal. [E-LPTA] (Unpublished)

Yung, Agnes Weng Lee and Soh, Fong Lim and Chua, David Sing Ngie and Khairuddin, Sanaullah and Rubiyah, Baini and Mohammad Omar, Abdullah (2017) Adsorption Equilibrium for Heavy Metal Divalent Ions (Cu2+, Zn2+, and Cd2+) into Zirconium-Based Ferromagnetic Sorbent. Advances in Materials Science and Engineering, 2017. ISSN 1687-8434

Yusuf, Bin Haji Mortadha (2000) Advances in concrete technology : a state of art report on high performance concrete. [E-LPTA] (Unpublished)

Yvonne, Lynn Walter. (2009) Proposed rainwater direct sotrage for faculty of engineering in UNIMAS. [E-LPTA] (Unpublished)

Z

Zamhuri, Bin Hj. Drahman (2016) An Evaluation of Airport Pavement Management System (APMS) Application In Kuching International Airport. Masters thesis, UNIMAS.

Zamri, Bujang and Othman, Che Puan (2017) Simulation model of traffic operations on single carriageway roads: Model calibrationand validation. ARPN Journal of Engineering and Applied Sciences, 12 (4). pp. 945-950. ISSN 1819-6608

Zi, Sheng Lui and Mah, D.Y.S. and Fang, Yenn Teo (2019) Stormwater detention in road shoulder using stormpav green pavement system. International Journal of Civil Engineering and Technology (IJCIET), 10 (4). pp. 400-409. ISSN 0976-6316

Zualkafli, M.I.A (2009) Flexural and long term behavior of reinforced concrete beam. [E-LPTA] (Unpublished)

Zubair, Khalid and N., Fisal and Rahat, Ullah and Hashim, Safdar and Wajaha, Maqbool and S., Zubaira and Adnan, Shahid Khan (2012) M2M Communication in Virtual Sensor Network for SHAAL. Jurnal Teknologi, 20. pp. 85-88. ISSN 2180–3722

Zuhailah, Taib (2005) Evaluation of rating curves for some gauging stations in Sarawak. [E-LPTA] (Unpublished)

Zulhatta bin, Marzoki (2004) The roof technologies at low cost houses and the effect on thermal performance : materials. [E-LPTA] (Unpublished)

Zulkifli, Ahamad (2005) Compressibility and shear strength behaviour of peat soil in Sarawak. [E-LPTA] (Unpublished)

This list was generated on Tue Dec 10 05:41:05 2019 +08.