Browse by Additional Information

Sukinah, Binti Abdul Karim (2017) Apllication of magnetic material in solving environmental problem. [Final Year Project Report] (Unpublished)

Oudrey, Thomas Ngau (2017) Application of water pinch technology in minimization of water consumption at a palm oil mill. [Final Year Project Report] (Unpublished)

Mohamad Rusli, Bin Parali (2017) Automated sorting machine for counting colony forming units (CFUs). [Final Year Project Report] (Unpublished)

Noamie, Anak Balai (2017) Automatic hand wash. [Final Year Project Report] (Unpublished)

Ivan Isaac, Anak Thomas (2017) Characterisation of coconut leaves fibre reinforced polymer composite. [Final Year Project Report] (Unpublished)

Eugene, Anak Jackson Joy (2017) Characterization of COD removal from palm oil mill effluent (POME) with the aid of anaerobic bioreactor. [Final Year Project Report] (Unpublished)

Eng, Pei Wen (2017) Design and development of elective courses recommender system (ECORS). [Final Year Project Report] (Unpublished)

Alixia, Lee Hwei Lih (2017) Design and evaluation of a mobile learning application to introduce cognitive sciences. [Final Year Project Report] (Unpublished)

Brian, Wan Martin (2017) Design of a grass harvester for a small scale goat farm. [Final Year Project Report] (Unpublished)

Shazrul Nizwan, Bin Suhardi (2017) Development of Airboat propulsion system. [Final Year Project Report] (Unpublished)

Mohd. Shauqi, Bin Isa (2017) Development of an automated machine for drying lemantak. [Final Year Project Report] (Unpublished)

Muhammad Nabil, Bin Has-bullah (2017) Development of automated cloth hanger. [Final Year Project Report] (Unpublished)

Tang, Kwong Yong (2017) Development of carrier robot for for physically impaired patients. [Final Year Project Report] (Unpublished)

Nigel, Wong Chee Foong (2017) Development of computer-assisted career guidance system for cognitive science undergraduates. [Final Year Project Report] (Unpublished)

Muhamad Shaiezad Aiman, Bin Ayub (2017) Development of decanter cake into commercial by product in Sarawak. [Final Year Project Report] (Unpublished)

Syed Muhammad Syafie, Bin Wan Saiful Bahari (2017) Development of palm oil sludge into commercial by-product in Sarawak. [Final Year Project Report] (Unpublished)

Tim Brandon, Anak Sawing (2017) Development of self-powered in-pipe robot : power regeneration system. [Final Year Project Report] (Unpublished)

Muhammad Nazirul, Bin Hamdan (2017) Development of sensor measuring module as the payload on unmanned aerial vehicles (UAV) in environmental monitoring. [Final Year Project Report] (Unpublished)

Mohammad Zulhafiz, Bin Jenuren (2017) Development of temperature measurement of cutting tool using infrared radiation with optical fiber. [Final Year Project Report] (Unpublished)

Muhammad Ammar Asyraf, Bin Zainuddin (2017) Effect of butyrate glycerine on diesel engine performance and emission characteristics. [Final Year Project Report] (Unpublished)

Noor Toheerah, Binti Abu Sammah (2017) Elemen pedagogi dan teknologi dalam reka bentuk MOOC. [Final Year Project Report] (Unpublished)

Nadzrin Ahmed, Bin Fasihuddin (2017) Fabrication and mechanical properties of cellulose nanofiber reinforced polyvinyl alcohol composites. [Final Year Project Report] (Unpublished)

Izzat, Bin Abdul Malik (2017) Fabrication of functional layer of solar cell by using spin and spray coating technique. [Final Year Project Report] (Unpublished)

Khairunisa, Binti Kamarudin (2017) Fabrictaion of an active layer of organic solar cell (OSC) by using spray coating. [Final Year Project Report] (Unpublished)

Yasmin Syazwani, Binti Mohamad (2017) Finite element analysis of defective die-casted AlSi9Cu3 (ADC12) steering housings. [Final Year Project Report] (Unpublished)

Alif Falatin, Bin Abdul Latif (2017) Fish dorsal inspired skew turning vanes for HVAC system. [Final Year Project Report] (Unpublished)

Nazrul Irfan, Bin Abdul Rahman (2017) Force analysis of automotive double wishbone suspension systems. [Final Year Project Report] (Unpublished)

Augustus Galang, Anak Minggu (2017) Improvement of palm kernel extraction rate (KER) and palm kernel analysis. [Final Year Project Report] (Unpublished)

Dayang Nur Farah Zurina, Awg Salleh (2017) Improvement of pelletized fruit bunch (EFB) of oil and rice husk by using torefaction and pre-treatment method. [Final Year Project Report] (Unpublished)

Mas Nor Zamirlah, Binti Zamirhan (2017) Improving ergonomics working condition in medium sized manufacturing industry. [Final Year Project Report] (Unpublished)

Joel, Anak Ngikoh @ Nyikoh (2017) Integrating an automated sorting machine with image processing device colony enumeration procedure. [Final Year Project Report] (Unpublished)

Ummie Zulaikha, Binti Kamarul Jaman (2017) Investigate the effectiveness of bio-silica absorbent from several sarawak palm oil waste ash. [Final Year Project Report] (Unpublished)

Brandon, Ka Jen Hau (2017) Investigation of physico-mechanical, themal, dynamic mechanical, morphological and optical properties on low density polyethylene/silica and polypropylene/clay nanocomposites. [Final Year Project Report] (Unpublished)

Corneelia, Anak Tedong (2017) Isotherm study of heavy metal adsorption by membrane incorporated with activated carbon. [Final Year Project Report] (Unpublished)

Loyrita Dulling, Anak Pantau (2017) Low current tidal stream turbine for sarawak tidal stream application. [Final Year Project Report] (Unpublished)

Majorie, Telun Avit (2017) Mechanical properties of concrete with clam shell powder as partal cement replacement. [Final Year Project Report] (Unpublished)

Nur Mehranie, Binti Shamsul Bahri (2017) Mechanised slicing tools for Sarawak layered cake. [Final Year Project Report] (Unpublished)

Abd. Raqib, Bin Piee (2017) Microbial fuel cell (MFC) with algal biocathode: bioenergy production and wastewater treatment using sago mill effluent. [Final Year Project Report] (Unpublished)

Siti Nur Shafina, Binti Sabaruddin (2017) Modelling and optimization of antibacterial composite membrane by using box-behnken. [Final Year Project Report] (Unpublished)

Dayang Siti Herdawati, Binti Abang Hardin (2017) Optimisation study on the improvement of crude palm oil (CPO) production process from palm oil mill. [Final Year Project Report] (Unpublished)

Bong, Kuek Kong (2017) Optimization of sludge flow behavior in a mixing tank through blade design. [Final Year Project Report] (Unpublished)

Siti Fatimah, Binti Jasni (2017) Pallet design improvement and how a poor design will affect the workers. [Final Year Project Report] (Unpublished)

Noor Syazwani, Binti Salim (2017) Palm oil mill effluent treatment using hybrid microbial fuel cell-activated carbon system. [Final Year Project Report] (Unpublished)

Lydia, Lee Shin Nuo (2017) Phycoremediation by spirulina platensis for ammoniacal nitrogen reduction. [Final Year Project Report] (Unpublished)

Nur Adilah, Binti Ahmad (2017) Portable smartphone-based laser glucometer for non-invasive measurement of glucose level of diabetic patients. [Final Year Project Report] (Unpublished)

Muhammad, Jayyad (2017) Preparation and characterization of sago starch-cellulose reinforced polylactic acid hybrid biocomposite. [Final Year Project Report] (Unpublished)

Bryan Gran, Morse (2017) Production and characterization of thin film from sea cucumber. [Final Year Project Report] (Unpublished)

Chong, Li Yee (2017) Production of bacterial pigment by fermentation of serratia marcescens for dye sensitized solar cell. [Final Year Project Report] (Unpublished)

Faiz, Bin Othman (2017) Recirculated system design for eco-burner based on intake manifold in reciprocating engine. [Final Year Project Report] (Unpublished)

Ricky, Anak Tubam (2017) Removal color of dyes from textile industrial wastewater by sago waste as a coagulant. [Final Year Project Report] (Unpublished)

Nur Fariheen Natasha, Binti Seleman (2017) Removal of heavy metal from plating industrial wastewater by sago waste using coagulation method. [Final Year Project Report] (Unpublished)

Tharisiny, A/p Kumaran (2017) Representation of adolescent identity status through facebook use. [Final Year Project Report] (Unpublished)

Siti Faris Afifah, Binti Abdul Ghani (2017) Servitization : challenges in manufacturing. [Final Year Project Report] (Unpublished)

Sylvia Wendy, Anak Boney (2017) Simulation vibration analyss of keropok keping drying machine. [Final Year Project Report] (Unpublished)

Mohd. Nuramin, Bin Masli (2017) Study of butylal as fuel additive on diesel engine performance and emission characteristics. [Final Year Project Report] (Unpublished)

Nur Sharzaina Hanum, Binti Sekiun (2017) Study of the effect of hydrodynamic, electrostatic and magnetic forces on the non-thermal plasma (NTP) injection in the crude oil. [Final Year Project Report] (Unpublished)

Nur Nadia, Binti Hamri (2017) Study on potential coconut fiber as shock absorbing product. [Final Year Project Report] (Unpublished)

Easter Izzaline, Anak Meli (2017) Tidal power plant scheme at Kuching Barrage, Sarawak. [Final Year Project Report] (Unpublished)

Noor Juwita, Binti Junaiddi (2017) To study the potential of coconut fiber as soundproofing product. [Final Year Project Report] (Unpublished)

Hillary Assan, Anak Liam (2017) Use of laser for non-contact measurement of micro-components, insects, and biological specimens. [Final Year Project Report] (Unpublished)

Luqman, Bin Abdul Khalek (2017) Video based motion analysis for the overhead badminton forehand stroke. [Final Year Project Report] (Unpublished)

Vigneshawaran, A/l Ramrao (2017) Video based motion analysis on badminton's lunge maneuver. [Final Year Project Report] (Unpublished)

Lucia, Anak Chang Embo (2017) Water quality in aquaponics system. [Final Year Project Report] (Unpublished)

Muhammad Maula, Nordin (2017) The design of buildable low cost automated cat pet feeder using Arduino UNO starter kit. [Final Year Project Report] (Unpublished)

Azmeera, Binti Shaibi (2017) The study of lemongrass fibre reinforced HDPE composites. [Final Year Project Report] (Unpublished)

Nur Ain Syuhada, Binti Shukor (2017) A study relationship between types of parenting styles academic motivation among adolescencents in Johor Bahru. [Final Year Project Report] (Unpublished)