Items where Division is "Academic Faculties, Institutes and Centres > Faculty of Engineering
Faculties, Institutes, Centres > Faculty of Engineering" and Year is 2018

A

A. Balqis, Z. Khan and Ahmed Mohamed, Ahmed Haidar and Al-Khalid, Hj Othman (2018) Contingency Analysis of a Power Grid with the Participation of Utility-Scale Solar PV Units: A Case Study from Sarawak, Malaysia. In: 2018 IEEE International Conference on Power and Energy (PECon2018), 3-4 December 2018, Berjaya Times Square Hotel, Kuala Lumpur.

ALLENE ALBANIA, LINUS (2018) EXPERIMENTAL STUDY OF CONTINUOUS ELECTROCOAGULATION TREATMENT OF PEAT WATER IN SARAWAK WITH ALUMINIUM ELECTRODE. [Final Year Project Report] (Unpublished)

AMIRUL HAZIZIE, HAMDAN (2018) CHEMICALLY MODIFIED SAGO STARCH REINFORCED POLY(LACTIC)ACID BIOCOMPOSITE. [Final Year Project Report] (Unpublished)

AMIRUL HAZIZIE, HAMDAN (2018) CHEMICALLY MODIFIED SAGO STARCH REINFORCED POLY(LACTIC)ACID BIOCOMPOSITE. [Final Year Project Report] (Unpublished)

AZRUL, ABDULLAH (2018) CFD SIMULATION OF THERMAL ACCUMULATION AND DISTRIBUTION IN AN ENCLOSED VEHICLE (A-SEGMENT). [Final Year Project Report] (Unpublished)

Abba, I. and Abidin, W.A.W.Z and Pai, B.V. (2018) An Optimized Experimental Methodology for L-Band Signal Propagation Sentences Evaluation. 2017 6th International Conference on Electrical Engineering and Informatics (ICEEI), 2018. pp. 1-6. ISSN 2155-6830

Abdul Azim, Abdullah and Azrul, Abdul Mutalib and Shahrizan, Baharom and Wan Hamidon, Wan Badaruzzaman (2018) Mechanical Behavior of Square CFST Columns with Embedded Steel Plate Reinforcement. International Journal of Structural and Civil Engineering Research, 7 (4). pp. 319-322. ISSN 2319-6009

Abdul Razak, Abdul Karim and Quenneville, Pierre and Norazzlina, M.Sa'don and Mahshuri, Yusof (2018) Investigating the Meraka Hardwood Failure in Bolted Connections Parallel to the Timber Grain. International Journal of Engineering and Technology (UAE), 7 (3.18). pp. 62-65. ISSN 2227-524X

Abdul Wafi, Razali and Mohd Asraf, Ayob and Mohammad Nabil Fikri, Saaid and Awang Ihsan, Awang Yunus and Khairul Anuar, Maarof (2018) Determining the Suitability of POFA as Partial Replacement to Cement in Concrete for Acoustic Properties: Sounds Transmission Loss and Sounds Absorption Assessment. IOP Conference Series: Materials Science and Engineering, 429. ISSN 17578981

Abdulkadir, Muhammad Lawan and Su, Hieng Tiong and Then, Yi Lung and Jingxin, Zhang (2018) Parallel dual-slot PIFA for 2.45GHz rectenna applications. In: 2018 IEEE Sensors Applications Symposium (SAS), 12-14 March 2018, Seoul, Korea (South).

Achmad, Syafuddin and Salmiati, Salmiati and Hadibarata, Tony and Ahmad Kueh, Beng Hong and Mohd Razman, Bin Salim and Muhammad Abbas, Bin Ahmad Zaini (2018) Silver Nanoparticles in the Water Environment in Malaysia : Inspection, characterization, removal, modeling, and future perspective. Scientific Reports, 8 (986). pp. 1-15. ISSN 2045-2322

Adebayo, Johnson Olufemi and Madzlan, Napiah and Kamaruddin, Ibrahim and Mohamad Raduan, Bin Kabit (2018) Evaluation of Waste Cooking Oil as Sustainable Binder for Building Blocks. E3S Web of Conferences, 65. ISSN 2267-1242

Adila, Fakhar and Ahmed Mohamed, Ahmed Haidar and Musse, Mohamud Ahmed and Rahman, A. K. (2018) Sustainable Energy Management Design for Bario Microgrid in Sarawak, Malaysia. In: 2018 IEEE International Conference on Power and Energy (PECon2018), 3-4 December 2018, Berjaya Times Square Hotel, Kuala Lumpur.

Ahmad Adzlan, Fadzli Khairi and Mohamed Sukri, Mat Ali (2018) OpenFOAM Implementation for The Study of Streamwise Vortex-Induced Vibration-Based Energy Harvester for Sensor Networks. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 48 (2). pp. 165-175. ISSN 2289-7879

Ahmed Mohamed, Ahmed Haidar and Smith, Vic and Elphick, Sean (2018) A multipurpose problembased learning platform for education and research under smart grid umbrella. International Journal of Electrical Engineering Education, 58 (1). pp. 1-37. ISSN 2050-4578

Akeem, Gbenga Amuda and Fauzan, Sahdi and Alsidqi, Hasan and Siti Noor Linda, Taib (2018) Variable penetration rate testing for shear strength of peat – a review. International Journal of Geotechnical Engineering. ISSN 1938-6362

Al Maalik Faizal, Shaik Anwar Raja (2018) 2-In-1 Multipurpose Tool For Agricultural Use. [Final Year Project Report] (Unpublished)

Alsidqi, Hasan (2018) Sertifikat penghargaan sebagai Keynote Speaker 5th ACE Conference 2018. [Certificate] (Unpublished)

Alsidqi, Hasan and Ting, Wee Kiet and Fauzan, Sahdi and Siti Noor Linda, Taib and Norsuzailina, Mohamed Sutan and Badhrulhisham, Abdul Aziz and Andy, Fourie (2018) Temperature change and the total stress anomaly in paste backfill. International Journal of GEOMATE, 14 (44). pp. 90-95. ISSN 2186-2982

Alya Norshahida, Mohammad Mustaffa (2018) Parametric Study Of Sintering Of Ceramic Pellet Using Sarawak Soils. [Final Year Project Report] (Unpublished)

Amir Azam, Khan and Bong, David B L and Andrew Ragai, Henry Rigit and Lim, Soh Fong and Al-Khalid, Othman (2018) Corrosion Study of Galvanized Ultra High Strength Steel Reinforced Overhead Transmission Conductors. International Journal of Engineering & Technology, 7 (3.18). pp. 83-86. ISSN 2227524X

Amir Azam, Khan and Magdalene, Anak Andrew Munot and Shirley, Anak Johnathan Tanjong and Rudiyanto, Bin Philman Jong and Hishammudin Afifi, Bin Huspi (2018) Gearing Towards a Greener Future. UNIMAS Publisher, Kota Samarahan, Sarawak. ISBN 9789672008552

Amuda, Akeem Gbenga and Fauzan, Sahdi and Alsidqi, Hasan and Siti Noor Linda, Taib and Boylan, Noel and Aliaa, Mohamad (2018) Measurement of Amorphous Peat Shear Strengthin the Direct Shear Box at High Displacement Rates. Geotechnical and Geological Engineering, 37. pp. 1059-1072.

Ana Sakura, Zainal Abidin and Nazreen, Junaidi and Andrew Ragai Henry, Rigit and Mohamad Syazwan Zafwan, Mohamad Suffian and Mohamad Syamim, Hamsawi and Shahrol, Mohamaddan and Rasli, Muslimen and Annisa, Jamali (2018) Simultaneous Heat and Mass Transfer in Kek Lapis Sarawak Baking. In: : 2018 2nd International Conference on Smart Sensors and Application (ICSSA), 24-26 July 2018, Kuching, Malaysia.

Ana Sakura, Zainal Abidin and Nazreen, Junaidi and M. S., Hamsawi and Andrew Ragai, Henry Rigit and Mohamad Syazwan Zafwan, Mohamad Suffian and Shahrol, Mohamaddan and Rasli, Muslimen and Annisa, Jamali (2018) Comparison Study between FEM Simulation and Experimental of Heat and Mass Transfer in Kek Lapis Sarawak Baking. International Journal of Integrated Engineering, 10 (7). pp. 204-218. ISSN 2600-7916

Andrew Ragai, Henry Rigit (2018) STEM for Sustainable Development. Universiti Malaysia Sarawak, (UNIMAS). ISBN 9789672008583

Andrew Ragai, Henry Rigit and Norman Baggio, Anak Francis (2018) Development of Preliminary Design for Tidal Power Plant at Kuching Barrage. In: International Conference of Fluid Machinery and Automation System (ICFMAS 2018), 27 - 28 October 2018, Hanoi, Vietnam.

Anis, A.A and Rashidi, C. B. M. and Aljunid, S. A. and Rahman, A.K. (2018) Evaluation of FSO System Availability in Haze Condition. IOP Conference Series: Materials Science and Engineering, 318. pp. 1-6. ISSN 17578981

Annie, Joseph and Huang, Timothy Li Xuan and Kuryati, Kipli and Kho, Lee Chin and Ngu, Sze Song (2018) Smart Body Temperature Monitoring system for Children via Mobile. 2018 International Conference on Computational Approach in Smart Systems Design and Applications (ICASSDA), 2018. ISSN ISBN: 978-1-5386-8369-9

Annisa, Jamali and Ana Sakura, Zainal Abidin and Mat Darus, I.Z. and Tokhi, M.O. (2018) Controlling the non-parametric modeling of Double Link Flexible Robotic Manipulator using Hybrid PID tuned by PType ILA. International Journal of Integrated Engineering, 10 (7). pp. 219-232. ISSN 2600-7916

Annisa, Jamali and Intan Zaurah, Mat Darus and Mohammad Osman, Tokhi and Ana Sakura, Zainal Abidin (2018) Utilizing P-Type ILA in tuning Hybrid PID Controller for Double Link Flexible Robotic Manipulator. In: 2nd International Conference on Smart Sensors and Application (ICSSA), 24 - 26 July 2018, Kuching, Malaysia.

Annisa, Jamali and Intan Zaurah, Mat Darus and Shahrol, Mohamaddan and Mohammad Osman, Tokhi (2018) Implementation of PID based controller tuned by Evolutionary Algorithm for Double Link Flexible Robotic Manipulator. In: 2018 International Conference on Computational Approach in Smart Systems Design and Applications (ICASSDA), August 2018, Kuching, Malaysia.

Annisa, Jamali and Mat Darus, I. Z. and Tokhi, M.O. and Ana Sakura, Zainal Abidin (2018) Utilizing P-Type ILA in tuning Hybrid PID Controller for Double Link Flexible Robotic Manipulator. In: 2018 2nd International Conference on Smart Sensors and Application (ICSSA), 24-26 July 2020, Kuching, Sarawak.

Annisa, Jamali and Mat Darus, I.Z. and M. H., Hassan and Tokhi, M.O. (2018) Decentralized Intelligent PID based controller tuned by Evolutionary Algorithm for Double Link Flexible Robotic Manipulator with Experimental Validation. In: Intelligent Control and Automation Symposium,, 27 November 2018, Johor.

Asrani, Lit and M. S., Rusli and M. N., Marsono (2018) On the Impact of Routing and Network Size for Wireless Network-on-Chip Performance. In: THE INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC, COMMUNICATION AND CONTROL ENGINEERING (ICEECC2018), 28-29 November 2018, Johor Bahru, Malaysia.

Atikah, Rahmi and Siti Noor Linda, Taib and Fauzan, Sahdi (2018) Investigation of the Application of Various Water Additive Ratios on Unconfined Compressive Strength of Cement-Stabilized Amorphous Peat at Different Natural Moisture Contents. Advances in Civil Engineering, 2018. ISSN 1687-8086

Atikah Balqis, Basri and Khairayu, Badron and Ahmad Fadzil, Ismail and Abadi, Chanik and Hamid, Salim and Maszlan, Ismail (2018) Propagation Measurements during Daytime for RazakSAT S-Band Space to Earth Satellite Signal Transmission. International Journal of Future Generation Communication and Networking, 11 (1). pp. 63-72. ISSN 2233-7857

Atta Idrawani, Zaini and Bambang, Karsono and Awang Hasim, Awang Sulong (2018) From sacred to secular : Baruk architecture on secular buildings in Sarawak. IOP Conference Series: Earth and Environmental Science, 213. 012-043. ISSN 1755-1315

Azhaili, Baharun and Muhammad Syukri, Imran and Siti Halipah, Ibrahim and Wan Azlan, Bin Wan Zainal Abidin (2018) Night Cooled Radiant Cooling Panel for Sustainable Building Cooling Mode in Malaysia. Journal of Construction in Developing Countries, 23 (1). pp. 61-79. ISSN 1823-6499

B

BONG, SOOK NEE (2018) OPTIMIZATION AND KINETIC STUDY OF PRODUCTION OF SOURSOP LEAF EXTRACT. [Final Year Project Report] (Unpublished)

Bambang, Karsono and Nurakmal Abdullah, @ Goh Tuo Ho and Dona Rose, Binti Koesmeri and Zayn, Al-Abideen Gregory and Yon Syafni, Binti Samat (2018) Functional Attachment in Kuching Riverfront Promenade, Sarawak - Malaysia. IOP Conference Series: Materials Science and Engineering, 401 (1). ISSN 1757-8981

Bambang, Karsono and Zayn, Al-Abideen Gregory and Dona Rose, Koesmeri and Awang Hashim, Awang Sulong and Atta Idrawani, Zaini (2018) The Usefulness of Main Prayer Hall of Masjid Agung Islamic Center of Lhokseumawe, Aceh - Indonesia. IOP Conference Series: Materials Science and Engineering, 401 (1). ISSN 1757-8981

Barry Lawrence, Mengga (2018) Low Power Laser Cutting Of Cotton Fibre Laminate For Electrical Insulation At Low Voltages. [Final Year Project Report] (Unpublished)

Bathilde, Johan Bhurny and Then, Yi Lung and Rajith, Chameera and Fei, Siang Tay and Dyg Norkhairunnisa, Abang Zaidel (2018) Continuous heart rate monitoring system as an IoT edge device. 2018 IEEE Sensors Applications Symposium (SAS), 2018. pp. 1-6. ISSN ISBN: 978-1-5386-2092-2

Benedict Baski, Jatim (2018) Cooling Patch From Hibiscus Rosa Sinensis Leaves Extract. [Final Year Project Report] (Unpublished)

Bong, Charles Hin Joo (2018) Statistical Analysis and Determination of Representative Size for Sediment in Malaysian Urban Drains. Journal of Applied Science & Process Engineering, 5 (2). pp. 286-295. ISSN 2289-7771

Bong, Charles Hin Joo and Leong, Geok Teng and Aminuddin, Bin Ab Ghani and Hanafusa, A. (2018) SWMM Modelling of Automated Hydraulic Flushing Gate as a Flow Control Structure. In: 4th International Conference on Water Resources (ICWR-2018), 27-28 November 2018, Bayview Hotel, Langkawi.

Bong, David Liang Bong and Loh, Woei-Tan (2018) A Just Noticeable Diference‑Based Video Quality Assessment Method with Low Computational Complexity. Sensing and Imaging, 19:33. pp. 1-20. ISSN 1557-2072

Bong, S. Wee and Shafrida, binti Sahrani @ Shahran and Kismet, anak Hong Ping (2018) B2-Spline Interpolation Technique for Overset Grid Generation and Finite-Difference Time-Domain Method. Progress In Electromagnetics Research C, 86. pp. 177-190. ISSN 1937-8718

Bong Hin Joo, Charles and Richard, J. (2018) Monitoring Drought Using the Standardized Precipitation Index (SPI) in Sarawak River Basin. In: 4th International Conference on Water Resources (ICWR-2018), 27-28 November 2018, Bayview Hotel, Langkawi.

Boon, David Liang Bong and Loh, Woei-Tan (2018) New spatiotemporal method for assessing video quality. International Journal of Computational Vision and Robotics, 8 (3). pp. 336-348. ISSN 1752-914X

Buswig, Yonis. M. Yonis (2018) A COMPARATIVE STUDY OF CONVENTIONAL PID AND FUZZY-PID FOR DC MOTOR SPEED CONTROL. Journal of Fundamental and Applied Sciences, 10 (5S). pp. 282-297. ISSN 1112-9867

Buswig, Yonis.M.Yonis and A. J. M., S. Lim and S., Y. Sim and Anting, N. and Prasetijo, J. and T. I. T, Noor Hasanah and H., H. Goh and C., C. Kang (2018) The Study of Stresses on Soil from Roadways Using Plaxis to Generate Potential Energy with Piezoelectric. Indonesian Journal of Electrical Engineering and Computer Science, 11 (2). pp. 755-760. ISSN 2502-4752

Buswig, Yonis.M.Yonis and Al-Khalid, bin Hj Othman and Norhuzaimin, Bin Julai and Sim, Sy Yi and Wahyu, Mulyo Utomo (2018) Voltage Tracking of a Multi-Input Interleaved Buck-Boost DC-DC Converter Using Artificial Neural Network Control. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 10 (1-12). pp. 29-32. ISSN 2289-8131

Buswig, Yonis.M.Yonis and Al-Khalid, bin Hj Othman and Norhuzaimin, bin Julai and Sim, Sy Yi and Utomo, W.M and A. J. M., S. Lim (2018) Implementation of Artificial Neural Network Controller for Double-Input Boost Converter. Indonesian Journal of Electrical Engineering and Computer Science, 11 (2). pp. 784-790. ISSN 2502-4752

Buswig, Yonis.M.Yonis and Sim, S.Y. and Chia, C.K and Utomo, W.M and Goh, H.H. and Lim, A.J.M.S. and Kek, S.L. and Bohari, A. and Cham, C.L (2018) Enhance Cascaded H-Bridge Multilevel Inverter with Artificial Intelligence Control. Enhance Cascaded H-Bridge Multilevel Inverter with Artificial Intelligence Control, 11 (1). pp. 105-112. ISSN 2502-4752

Buswig, Yonis.M.Yonis and Sim, S.Y. and Goh, H.H. and Lim, A.J.M.S. and Kek, S.L. and Mustafa, F. and Bohari, A. and Ardi, M.A. (2018) Power Factor Improvement in Power System with the Integration of Renewable Energy. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-12). pp. 19-23. ISSN 289-8131

Buswig, Yonis.m.yonis and Utomo, W.M and Afarulrazi, Abu Bakar and Suhaila, Alias and Sim, S.Y. and Muhammad Ikhsan, Setiawan and Mudjanarko, Sri Wiwoho and Agus, Sukoco and Taufik, Taufik (2018) Modeling of A Single Phase 7-Level Cascaded H-Bridge Multilevel Inverter. International Journal of Engineering and Technology(UAE), 7 (2.6). pp. 327-330. ISSN 2227-524X

C

CHING, LIOW VERN (2018) EFFECT OF BUFFER ANGLE FOR STORM FLOW REGULATOR IN CONTROLLING PEAK DISCHARGE. [Final Year Project Report] (Unpublished)

CHRISTIE, MIJEN (2018) DESIGN AND IMPLEMENTATION OF SPACE VECTOR PULSE WIDTH MODULATION (SVPWM) FOR HARMONIC REDUCTION FOR THREE PHASE INVERTER SYSTEM. [Final Year Project Report] (Unpublished)

CLAUDIA SARA, SENIN (2018) URBAN TRAFFIC MANAGEMENT SYSTEM BY CCTV MONITORING. [Final Year Project Report] (Unpublished)

Chai, Chern Tcian (2018) Stormwater Retention Performances of Green Roof under the Tropical Climate of Sarawak. Masters thesis, Universiti Malaysia Sarawak.

Chai, Nee Ping (2018) Smartphone-based GPS-integrated Location Prediction Model for OBD-II-Equipped Land Vehicle Localization. PhD thesis, Universiti Malaysia Sarawak.

Chan, Boon Kean (2018) Experimental And CFD Simulation Study Of Thermal Accumulation And Distribution In Parked Car Cabin. [Final Year Project Report] (Unpublished)

Chiew, Fei Ha (2018) Mix Proportion and Compressive Strength Prediction Models for High Performance Concrete based on Computational Intelligence. PhD thesis, Universiti Malaysia Sarawak.

Chiew, Fei Ha and Lau, See Hung and Ng, Chee Khoon (2018) Monotonicity preserving SIRMs-connected fuzzy inference system for predicting HPC compressive strength. Intelligent Decision Technologies, 12 (3). pp. 293-302. ISSN 1872-4981

Chin, Ying Teh and Tay, Kai Meng and Chee, Peng Lim (2018) On the Monotonicity Property of the TSK Fuzzy Inference System: The Necessity of the Sufficient Conditions and the Monotonicity Test. International Journal of Fuzzy Systems, 20 (6). pp. 1915-1924. ISSN 15622479

Chin, Ying Teh and Yi, Wen Kerk and Tay, Kai Meng and Chee, Peng Lim (2018) On Modelling of Data-Driven Monotone Zero-Order TSK Fuzzy Inference Systems using a System Identification Framework. IEEE Transactions on Fuzzy Systems, 26 (6). pp. 3860-3874. ISSN 10636706

Ching, Vern Liow and Yau, Darrien Seng Mah and Mohd Remy Rozainy, bin Mohd Arif Zainol (2018) Modelling of Stormwater detention under urban road for conveyance and storage. International Journal of Research in Engineering & Advanced Technology, 6 (5). pp. 23-28. ISSN 2320-8791

Chong, Yee Ming (2018) Design of a Digital Electronic Load Controller (ELC) Unit for Micro-Hydro Power System. Masters thesis, Universiti Malaysia Sarawak.

Chua, David Sing Ngie and Goh, W.J. and Lim, S.F. and Jospeh, A. and Oon, Y.B. and Sia, C.V (2018) Development of an Automatic Vehicular Heatstroke Detection System. IOP Conference Series: Materials Science and Engineering, 429. ISSN 17578981

D

Daisy Annette, Runyut and Sharon, Robert and Idawati, binti Ismail and Raudhah, binti Ahmadi and Nur Amalina Shairah, Abdul Samat (2018) Microstructure and Mechanical Characterization of Alkali-Activated Palm Oil Fuel Ash. Journal of Materials in Civil Engineering, 30 (7). pp. 1-15. ISSN 8991561

Dayang Nur Salmi Dharmiza, Binti Awang Salleh and Seignez, Emmanuel (2018) Swift Path Planning : Vehicle Localization by Visual Odometry Trajectory Tracking and Mapping. Unmanned Systems, 6 (4). pp. 1-10. ISSN 2301-3869

Dayang Salyani, Abang Mahmod (2018) Sintering of Zirconium Diboride-Silicon Carbide (ZrB2-SiC) and Titanium Diboride-Silicon Carbide (TiB2-SiC) Ceramic Composites and Laser Surface Treatment: Potential Application in Low Temperature Protonic Ceramic Fuel Cells (LTPCFCs). PhD thesis, Universiti Malaysia Sarawak.

Dayang Salyani, Abang Mahmod and Amir Azam, Khan and Glandut, Nicolas and Labbé, Jean Claude (2018) An evaluation of the B4C formation in sintered ZrB2-SiC ceramic composites at 2100 °C. Journal of Alloys and Compounds, 735. pp. 510-515. ISSN 0925-8388

Dayangku Salma, Binti Awang Ismail and Azman, Bin Kassim and Hisham, Bin Mohamad and Ahmad Safuan, Bin A. Rashid and Aliff Ridzuan, Bunawan (2018) Application of Brillouin-based distributed optical fibre sensing technology to measure strain development of a slope model. MATEC Web of Conferences, 250. pp. 1-12. ISSN 2261-236X

Deanne, anak Edwin and Shafrida, binti Sahrani and Kismet, anak Hong Ping (2018) Efficiency of scattering algorithm with overset grid generation for detection of buried object. In: Microwave Conference (APMC), 2017 IEEE Asia Pacific, 13-16 Nov. 2017, Kuala Lumpar, Malaysia ..

Dunstan Dungat, Tedong (2018) Analysis Of Fracture Behaviour For Aluminium 6061 By Using Finite Element Analysis. [Final Year Project Report] (Unpublished)

E

EIVO, KELVIN (2018) SCALING UP OF LACTIC ACID FERMENTATION USING Enterococcus faecalis. [Final Year Project Report] (Unpublished)

ELLYNE, ENDUAT (2018) BEHAVIOURS OF ENGINEERING PROPERTIES OF ACACIA HYBRID UNDER COPPER CHROME ARSENIC (CCA) TREATMENT AT DIFFERENT AGE GROUPS. [Final Year Project Report] (Unpublished)

EMILIA EVYLN, CHRISTERMALLER (2018) COMPARISON OF UCS TEST WITH ELECTROKINETIC (EK) TREATMENT FOR STRENGTH DEVELOPMENT OF REINFORCED PEAT-POLYESTER FIBER. [Final Year Project Report] (Unpublished)

EVENNA, LINGKING (2018) DEVELOPMENT AND MODELING OF THREE PHASE INVERTER FOR HARMONIC IMPROVEMENT USING SINUSOIDAL PULSE WIDTH MODULATION (SPWM) CONTROL TECHNIQUE. [Final Year Project Report] (Unpublished)

Ephrem Ryan, Alphonsus (2018) Control of Heating and Cooling of Adsorbers for Adsorption Cooling from Vehicle Exhaust Waste Heat using Programmable Logic Controller. Masters thesis, Universiti Malaysia Sarawak.

F

FAHREEZA, LATIF (2018) IMPROVEMENT ON THE BANDWIDTH AND GAIN PERFORMANCES OF THE 5G MICROSTRIP PATCH ANTENNA BY USING DEFECTED GROUND STRUCTURE. [Final Year Project Report] (Unpublished)

FELICITY, UMANG JANANG (2018) CONSOLIDATION BEHAVIOUR OF AMORPHOUS PEAT AT KAMPUNG ENDAP, SAMARAHAN, SARAWAK. [Final Year Project Report] (Unpublished)

FINA SYAZARINA, LET (2018) OUTCOME-BASED EDUCATION (OBE) MOBILE APPLICATION. [Final Year Project Report] (Unpublished)

FONG, PAU HUA (2018) RECYCLE TYRE RUBBER AS FINE AGGREGATE IN HOT MIX ASPHALT (HMA). [Final Year Project Report] (Unpublished)

Fabian Halley Pata, Alban Dattu and Syed Tarmizi, Syed Shazali and Magdalene, Andrew Munot and Abang Mohamad Aizuddin, Abang Mohd Mohtar and Noor Hisyam, Noor Mohamed (2018) Simulation Study of a Futsal Ball Deformation in Normal Impact Using Finite Element Method. International Journal of Modeling and Optimization, 8 (3). pp. 188-192. ISSN 2010-3697

Fahizan, Mahmud (2018) Development Of Particle Image Velocimeter For Two-Dimensional (2d) Flow Field Measurement. [Final Year Project Report] (Unpublished)

Faisal, Amsyar and Cher Siang, Tan and Chau Khun, Ma and Arizu, Sulaiman (2018) Review on Composite Joints for Cold-Formed Steel Structures. E3S Web of Conferences, 65 (08006). pp. 1-11. ISSN 2267-1242

Faizal, Bin Baharum and Muhamad Hanif, Bin Hassan and Mohd Dzulkarnaen, Bin Sudirman and Mohd Nasrun, Bin Mohd Nawi and Siti Halipah, Binti Ibrahim (2018) A Comparative Study of Levelized Cost of Electricity Between Photovoltaic and Concentrated Solar Powered Power Plants in Malaysia. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 50 (2). pp. 134-145. ISSN 2289-7879

Fakhar, Adila (2018) Energy Management Strategies for Optimal Hybrid Microgrid Configuration in the Smart Village Context. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

G

George Lawai, Galau (2018) ARC Welding Investigation On The Effect Of Independent Input Parameters On Welded Joint Strength Of AISI 1020 Carbon Steel. [Final Year Project Report] (Unpublished)

Ghaleb, Z. A. and Mariatti, binti Mustapha and Zulkifli, bin Mohamad Ariff and Ervina, Junaidi (2018) Preparation and properties of amine functionalized graphene filled epoxy thin film nano composites for electrically conductive adhesive. Journal of Materials Science: Materials in Electronics, 29 (4). pp. 3160-3169. ISSN 0957-4522

H

HUI, LAW SOON (2018) ENGINEERING PROPERTIES OF LIGHTWEIGHT SANDWICH WALL PANEL MADE WITH LIGHTWEIGHT CONCRETE. [Final Year Project Report] (Unpublished)

Halim, N.A.A. and Sahari, S.K. and Hamzah, A.A. and Majlis, B.Y. and Marini, Sawawi and Hasanah, L. and Kashif, M. (2018) Activation energy of thermal oxidation germanium oxide on germanium substrates. 2018 IEEE International Conference on Semiconductor Electronics (ICSE), 2018. ISSN ISBN: 978-1-5386-5283-1

Hamizan, Sharbini and Nur Aisyah, binti Masrizal and Cheah, Wai Shiang and Chiu, Po Chan and Tan, Ping Ping and Noor Alamshah, Bolhassan and Azlina, Ahmadi Julaihi (2018) The Analysis of 2D Crowd Behaviour Simulation during Emergency Situation. In: 7th international Conference on Software and Computing Technologies (ICSCT), 7th - 9th April 2018, Kuala Lumpur, Malaysia.

Handie, Ahmataku and Shahrol, Mohamaddan and Mahshuri, Yusof and Aidil Azli, Alias and Kuryati, Kipli and Norhayati, Soin (2018) Improved Delayering Method for SOI Wafer Processing. 2018 IEEE International Symposium on the Physical and Failure Analysis of Integrated Circuits (IPFA), 2018. ISSN ISBN: 978-1-5386-4929-9

Harizama, M.Z. and Tamrin, K.F. and Nukman, Y. and Yusof, F. and Sheikh, N. A. (2018) Effect of Process Parameters on the Laser Joining of Stainless Steel with Three-dimensional (3-D) Printed Polymer Sheet. Lasers in Engineering, 41 (6). pp. 393-408. ISSN 0898-1507

Harreh, Dewi and Saleh, A.A. and Reddy, A. N.R. and Hamdan, S. and Charyulu, K. (2018) Production of Karanja Methyl Ester from Crude Karanja Oil Using Meretrix Lyrata Synthesised Active Cao Catalyst. International Journal of Automotive and Mechanical Engineering, 15 (3). pp. 5683-5694. ISSN 2229-8649

Harreh, Dewi and Saleh, Aa A. and Reddy, A. N.R. and Hamdan, Sinin (2018) An Experimental Investigation of Karanja Biodiesel Production in Sarawak, Malaysia. Journal of Engineering (United States), 2018. ISSN 23144904

Harriharan, Remash (2018) Study On Melamine Foam As A Sound Absorbing Material. [Final Year Project Report] (Unpublished)

Hasan, A. Rahman and Sahdi, Fauzan and Norsuzailina, Sutan and Mijan, N. and Sinin, Hamdan (2018) Strength Behavior of Sedimented Gypsum Slurry. Geotechnical Testing Journal, 41 (6). pp. 1155-1165. ISSN 1945-7545

Hin, Charles Joo Bong (2018) Certificate as a presenter at 4th International Conference on Water Resources (ICWR-2018), 27-28 November 2018. [Certificate] (Unpublished)

Ho, Lee Lee (2018) Implementing Environmental Management Systems in Various Organizations of Sarawak : Adoption Factors and Implementation Motivations. PhD thesis, Universiti Malaysia Sarawak.

Hushairi, Zen and Adnan, Mahmood and Shadi, M. S. Hilles (2018) Vertical handover decision schemes in fourth generation heterogeneous cellular networks: A comprehensive study. International Journal of Business Data Communications and Networking, 14 (1). pp. 1-26. ISSN 1548-0631

Hushairi, Zen and Jamaah, Suut and Al-Khalid, Othman and Khairuddin, Ab Hamid (2018) Decoding of Decode and Forward (DF) Relay Protocol using Min-Sum Based Low Density Parity Check (LDPC) System. International Journal of Communication Networks and Information Security (IJCNIS), 10 (1). pp. 199-212. ISSN 2076-0930

Hushairi, Zen and Mahmood, Adnan and Hilles, Shadi M. S. (2018) Big Data and Privacy Issues for Connected Vehicles in Intelligent Transportation Systems. In: Encyclopedia of Big Data Technologies. Springer International Publishing AG, pp. 1-7.

Hushairi, Zen and Ong, Sylvia Ai Ling and Al-Khalid, bin Hj Othman and Khairuddin, Ab Hamid (2018) Distributed Double Differential Space-Time Coding with Amplify-and-Forward Relaying. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-12). pp. 45-50. ISSN 2289-8131 (online)

I

Ibrahim, M.D and Amran, S.N.A. and Yunos, Y.S and Rahman, M.R.A. and Mohtar, M. Z. and Wong, L.K. and Zulkharnain, A. (2018) The Study of Drag Reduction on Ships Inspired by Simplified Shark Skin Imitation. Applied Bionics and Biomechanics, 2018. pp. 1-11. ISSN 1176-2322

Islam, M.S. and Baini, R. and Tanjong, S.J and Said, M.A.M and Joy, E.J (2018) Effects of Hydraulic Retention Time and Solid Retention Time of POME on COD Removal Efficiency. International UNIMAS STEM Engineering Conference 2017, 15 (2). pp. 5347-5355. ISSN 2229-8649

J

JOLENE DIANDRA, JAMES (2018) DEVELOPMENT OF OE-BASED BROWN-FORSYTHE TEST ALGORITHM FOR CONTROL VALVE STICTION DETECTION. [Final Year Project Report] (Unpublished)

JONG, FAR CHEN (2018) STUDY OF LIGHTNING ACTIVITY AND ESTIMATION OF LIGHTNING CHARACTERISTICS IN SARAWAK USING GENETIC ALGORITHM. [Final Year Project Report] (Unpublished)

JUSTINA ROSE, SELVANATHAN (2018) PALM OIL MILL EFFLUENT TREATMENT AND BIO-ENERGY GENERATION USING HYBRID MICROBIAL FUEL CELL – ADSORPTION SYSTEM. [Final Year Project Report] (Unpublished)

Jaafar, E. and Kashif, M. and Sahari, S.K. and Ngaini, Zainab (2018) Study of Morphological, Optical and Electrical Properties of Graphene Oxide Thin Film Relative to the Reaction Time of Synthesis. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 10 (1-12). pp. 25-28. ISSN 2180-1843

Jamali, A. and Mat Darus, I.Z. and Mohd Samin, P.P. and Tokhi, M.O. (2018) Intelligent modeling of double link flexible robotic manipulator using artificial neural network. Journal of Vibroengineering, 20 (2). pp. 1021-1034. ISSN 1392-8716

Joe, Gideon Siang (2018) Utilization Of Jatropha Seed Cake For Solid Biofuel. [Final Year Project Report] (Unpublished)

Johari, A.H. and Law, P.L. and Taib, S.N.L. and Darrien, M.Y.S. and Yong, L.K. (2018) Development of Rainfall Erosivity (R) In Revised Universal Soil Loss Equation (RUSLE) For An Equatorial Region Of Sarawak. The International Journal of Engineering and Science (IJES), 7 (4). pp. 24-35. ISSN 2319–1813

Juliana, Binti Nawawi and Shafrida, Sahrani and Kismet, Anak Hong Ping (2018) Automated Scaling Region of Interest with Iterative Edge Preserving in Forward-Backward Time-Stepping. Progress In Electromagnetics Research M, 67. pp. 177-188. ISSN 19378726

K

KHUZARINA, MARZUKI (2018) DESIGN OF HORIZONTAL SLOPE PIPE WITH DIFFERENT OPENING SIZES OF GEOTEXTILE. [Final Year Project Report] (Unpublished)

KOKILAHVANI, SOMASUNDARAM (2018) MICROWAVE-ASSISTED PYROLYSIS OF MORINGA OLEIFERA SEEDS FOR BIO-OIL PRODUCTION. [Final Year Project Report] (Unpublished)

Karim, Siti Kartina Abdul and Lim, Soh Fong and Chua, David Sing Ngie and Shanti Faridah, Saleh and Puong, Ling Law (2018) Removal of crystal violet and acid green dye in aqueous solution using banana plant-derived sorbents [Penyingkiran pewarna crystal violet dan acid green dalam larutan akues menggunakan penjerap berasaskan pokok pisang]. Malaysian Journal of Analytical Sciences, 22 (1). pp. 115-122. ISSN 13942506

Khairul Anwar, Mohamad Said (2018) The relationship of silver content on water flux polysulfone composite membrane. [Teaching Resource]

Khairul Anwar, Mohamad Said and Nor Zakirah, Ismail and Ramizah Liyana, Jama'In and Nurul Ain, Mohamed Alipah and Norsuzailina, Mohamed Sutan and Genevieve Gadung, George and Rubiyah, Baini and Nur Syuhada, Ahmad Zauzi (2018) Application of Freundlich and Temkin Isotherm to Study the Removal of Pb(II) Via Adsorption on Activated Carbon Equipped Polysulfone Membrane. International Journal of Engineering & Technology, 7 (3.18). pp. 91-93. ISSN 2227524X

Khawarizmi Mohd, Jafery and Embong, Z. and Khee, Yee See and Dahlan, S. H. and Saiful Azhar, Ahmad Tajudin and Salawati, A. Ahmad and Siti Kudnie, Sahari and Omeje, Maxwell (2018) Investigation of dielectric constant variations for Malaysians soil species towards its natural background dose. IOP Conference Series: Materials Science and Engineering, 298 (1). ISSN 17578981

Kinidi, Lennevey and Wei, Ivy Tan Ai and Noraziah, binti Abdul Wahab and Khairul Fikri, bin Tamrin and Hipolito, Cirilo Nolasco and Shanti Faridah, binti Salleh (2018) Recent Development in Ammonia Stripping Process for Industrial Wastewater Treatment. International Journal of Chemical Engineering. pp. 1-14. ISSN 1687-8078

Kismet, Anak Hong Ping and Shafrida, Sahrani and Mohammad Tariqul, Islam and Amy Sahida, Soetarman and Dyg Norkhairunnisa, Abang Zaidel and Md. Zulfiker, Mahmud and Bong, Siaw Wee and Dyg Azra, Awang Mat and Toshifumi, Moriyama (2018) Detection of Breast Tumor in Scattered Fibroglandular Breast Tissue Using Inverse Scattering Technique. 2018 International Conference on Computational Approach in Smart Systems Design and Applications (ICASSDA). ISSN ISBN: 978-1-5386-8369-9

Kong, Jing Hui (2018) Study Of Postural Safety And Ergonomic Risk Assessment Among Athlete In Gym. [Final Year Project Report] (Unpublished)

Kuryati, Kipli and Cripen, Jiris and Siti Kudnie, Sahari and Rohana, Sapawi and Nazreen, Junaidi and Marini, Sawawi and Kismet, Anak Hong Ping and Tengku Mohd Afendi, Zulcaffle (2018) Morphological and Otsu’s Thresholding-Based Retinal Blood Vessel Segmentation for Detection of Retinopathy. International Journal of Engineering and Technology (UAE), 7 (3.18). pp. 16-20. ISSN 2227-524X

Kuryati, Kipli and Mirza Syazwana, Mohamad Noor and Muhammad Izzat Shafiq, Mohd Razali and Hushairi, Zen and Norhuzaimin, Julai and Kho, Lee Chin and Marini, Sawawi and Nazreen, Junaidi and Sharifah Masniah, Wan Masra (2018) Image Processing Mobile Application For Banana Ripeness Evaluation. 2018 International Conference on Computational Approach in Smart Systems Design and Applications (ICASSDA). ISSN ISBN : 1-5386-8369-5

Kuryati, Kipli and Mohammed Enamul, Hoque and Lik, Thai Lim and Muhammad Hamdi, Mahmood and Siti Kudnie, Sahari and Rohana, Sapawi and Nordiana, Rajaee and Annie, Joseph (2018) A Review on the Extraction of Quantitative Retinal Microvascular Image Feature. Computational and Mathematical Methods in Medicine, 2018. ISSN 1748670X

Kuryati, Kipli and Nur Afifah, Ismail and Shamsiah, Binti Suhaili and Isredza Rahmi, A Hamid and Nurdiani, Zamhari and Rohana, Sapawi and Kumalasari, Kipli and Dayang Azra, Awang Mat (2018) Developing Automated Bifurcation Angle Measurement Algorithm for Retinal Image Analysis. 2018 International Conference on Computational Approach in Smart Systems Design and Applications (ICASSDA). ISSN ISBN: 978-1-5386-8369-9

L

LAI, CARMEN (2018) DEREGULATING THE MALAYSIAN ELECTRICITY MARKET IN THE CONTEXT OF HYBRID POWER SYSTEM. [Final Year Project Report] (Unpublished)

LAURIDSON, MITA (2018) ALTERNATIVE ENERGY STORAGE SYSTEM FOR MICRO HYDRO SYSTEM. [Final Year Project Report] (Unpublished)

LAURIDSON ANAK MITA, MITA (2018) ALTERNATIVE ENERGY STORAGE SYSTEM FOR MICRO HYDRO SYSTEM. [Final Year Project Report] (Unpublished)

Lai, Josephine Chang Hui and Md Rezaur, Rahman and Sinin, Hamdan (2018) Comparative studies of thermo-mechanical and morphological properties of polylactic acid/fumed silica/clay (1.28E) and polylactic acid/fumed silica/clay (1.34TCN) nanocomposites. Polymer Bulletin, 75 (1). pp. 135-147. ISSN 0170-0839

Lai, Josephine Chang Hui and Nor Liyana, Binti Yusop (2018) Physico-Mechanical, Morphological Properties of Polyvinyl Alcohol/Palm Kernel Shell/Coconut Kernel Shell Elastomeric Polymer Nanocomposites. Journal of Applied Science & Process Engineering, 5 (2). pp. 296-303. ISSN 2289-7771

Lai, Suk Na (2018) Development Of A Child Detection System With Artificial Intelligence (Ai) Using Object Detection Method. [Final Year Project Report] (Unpublished)

Lau, J.T. and Mah, D.Y.S. (2018) Green Wall for Retention of Stormwater. Pertanika Journal of Science & Technology, 26 (1). pp. 283-298. ISSN 0128-7680

Lau, P. C. and Teo, DCL and Mohammad, Abdul Mannan (2018) Mechanical, durability and microstructure properties of lightweight concrete using aggregate made from lime-treated sewage sludge and palm oil fuel ash. Construction and Building Materials, 176. pp. 24-34. ISSN 0950-0618

Law, Sam Pek Kee (2018) Investigation On Mechanical Properties Of Durio Zibethinus Fibre Reinforced Composite. [Final Year Project Report] (Unpublished)

Lawan, S.M and Abidin, W.A.W.Z and Lawan, A.M. and Bichi, S.L. and Abba, I. (2018) The potential of topographical feed forward neural network (T-FFNN) technique in monthly wind speed and direction prediction. 2017 6th International Conference on Electrical Engineering and Informatics (ICEEI), 2018. pp. 1-6. ISSN 2155-6830

Lee, Lin Jye and Shenbaga, R. Kaniraj and Siti Noor Linda, Taib and Fauzan, Sahdi (2018) Review on Lateral Stability of Piled Riverine Structures in the Estuaries of Sarawak. International Journal of Engineering and Technology (UAE), 7 (3.18). pp. 21-25. ISSN 2227-524X

Lee, Yee Yong and Mohd Fadhil, Md Din and Zainura Zainon, Bin Noor and Kenzo, Iwao and Shazwin, Mat Taib and Singh, Lakhveer and Nur Hafizah, Abd Khalid and Nickholas, Anak Anting and Eeydzah, Aminudine (2018) Surrogate human sensor for human skin surface temperature measurement in evaluating the impacts of thermal behaviour at outdoor environment. Measurement, 118. pp. 61-72. ISSN 0263-2241

Lennevey, Kinidi and Ivy Tan, Ai Wei and Noraziah, Abdul Wahab and Khairul Fikri, Tamrin and Cirilo, Nolasco-Hipólito and Shanti Faridah, Salleh (2018) Recent Development in Ammonia Stripping Process for Industrial Wastewater Treatment. International Journal of Chemical Engineering, 2018 (1). pp. 1-14. ISSN 0974-5793

Lew, Hao Xian (2018) Conceptual Design And Analysis Of Sago Drying Machine. [Final Year Project Report] (Unpublished)

Liaw, Eileen Chuen Ing (2018) QUEUE MANAGEMENT SYSTEM. [Final Year Project Report] (Unpublished)

Lim, Alvin John Meng Siang and Sim, Sy Yi and Buswig, Yonis.M.Yonis and Nickholas, Anak Anting (2018) Relationship Between Undrained Shear Strength (Su) And Consolidation Ratio For Marine Soft Clay. MCRJ Special Issue, 5 (3). pp. 81-87. ISSN 2590 - 4140

Ling, J. A. and Then, Yi Lung and Yeow, You Kok and Ahmed, Jubaer and Zaidel, D. N.A. (2018) Tea leaves moisture prediction using one-port monopole sensor. Asia-Pacific Microwave Conference Proceedings, APMC. pp. 654-657. ISSN 978-153860640-7

Loh, Woei Tan (2018) Full Reference Objective Video Quality Assessment with Temporal Consideration. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Loh, Woei-Tan and Boon, David Liang Bong (2018) An error-based video quality assessment method with temporal information. Multimedia Tools and Applications, 77 (23). pp. 30791-30814. ISSN 1573-7721

Low, Wen-Pei and Mohd Fadhil, Md Din and Chang, Fung-Lung and Siti Nur Fatihah, Binti Moideen and Yee, Yong Lee (2018) Empirical models of kinetic rate for river treatment analysis of cellulosic materials. Journal of Water Process Engineering, 23. pp. 257-264. ISSN 2214-7144

M

M. N., Mohiddin and A. A., Saleh and A. N. R., Reddy and Sinin, Hamdan (2018) A Study on Chicken Fat as an Alternative Feedstock: Biodiesel Production, Fuel Characterisation, and Diesel Engine Performance Analysis. International Journal of Automotive and Mechanical Engineering, 15 (3). pp. 5535-5546. ISSN 2180-1606

M. Shahidul, Islam and Malcolm, M. L. and Eugene, J. J. and Mamunur, R. (2018) Optimization of factors affecting biogas production from POME. Science International (Lahore), 30 (6). pp. 851-859. ISSN 1013-5316

MIRZA SYAZWANA, MOHAMAD NOOR (2018) IMAGE PROCESSING MOBILE APPLICATION FOR BANANA RIPENESS EVALUATION. [Final Year Project Report] (Unpublished)

MIZANA I, AMER (2018) OUTCOME BASED-EDUCATION (OBE) QUALITY MANAGEMENT SYSTEM. [Final Year Project Report] (Unpublished)

MOHAMMED ENAMUL, HOQUE (2018) Feature Extraction of Retinal Microvasculature of Retinal Images. [Final Year Project Report] (Unpublished)

MUHAMMAD AMIR AFIQ, MOHAMED (2018) DESIGN OF SMART TRAFFIC LIGHT SYSTEM BASED ON INTERNET OF THINGS. [Final Year Project Report] (Unpublished)

MUHD NURUL AZAM, MUHD DRUS (2018) OPTIMIZATION OF IMMOBILIZATION MEDIA OF THALASSOSPIRA PROFUNDIMARIS : DIFFUSION AND STRENGTH STUDIES. [Final Year Project Report] (Unpublished)

Madhat Farouk, Abu-alnaeem and Ismail, Yusoff and Tham, Fatt Ng and Yatimah, Alias and May, Raksmey (2018) Assessment of groundwater salinity and quality in Gaza coastal aquifer, Gaza Strip, Palestine: An integrated statistical, geostatistical and hydrogeochemical approaches study. Science of The Total Environment, 615. pp. 972-989. ISSN 0048-9697

Magdalene, Andrew Munot and Abdullah, Hj. Yassin and Syed Tarmizi, Syed Shazali and Marini, Sawawi and Shirley, Jonathan Tanjong and Nur Tahirah, Razali (2018) Analysis of production planning activities in remanufacturing system. Journal of Mechanical Engineering and Sciences, 12 (2). pp. 3548-3565. ISSN 2231-8380

Mah, D.Y.S. and Ong, Johnny King Ngu and Liew, Vernon and Wan Hashim, Wan Ibrahim (2018) Augmenting Drainage System in the Old Town of Kuching, Sarawak, Malaysia. International Journal of Engineering and Technology, 7 (3.18). pp. 36-39. ISSN 2227-524X

Mah, D.Y.S. and Siew, Ling Loh and Md Abdul, Mannan and Wan Hashim, Wan Ibrahim (2018) Modelling of Surface Permeation in Multiple-Orifice Permeable Road. International Journal of Engineering and Technology, 7 (3.18). pp. 40-43. ISSN 2227-524X

Mah, D.Y.S. and Tze, Chiat Ng and Putuhena, Frederik Josep (2018) Integrating Infiltration Facility to Urban Road Drainage. International Journal of Engineering and Technology, 7 (3.18). pp. 31-35. ISSN 2227-524X

Mahmood, A. and Sapuan, S. M. and Karmegam, Karuppiah and Abu, Saleh Ahmed (2018) Design and Development of Kenaf Fiber-Reinforced Polymer Composite Polytechnic Chairs. Asian Journal of Agriculture and Biology, 6. pp. 62-65. ISSN 23078553

Mahshuri, Yusof and Amalina, Muhammad Afifi and Nur Tahirah, Razali and Marini, Sawawi and Abdul Razak, Abdul Karim (2018) Calcium Carbonate from Clam Shell as a Thermal Conductor in Particulate Filled Polymer Matrix Composites. International Journal of Engineering and Technology (UAE), 7 (3.18). pp. 101-105. ISSN 2227-524X

Majdee, Tohtayong and Sheroz, Khan and Mashkuri, Yaacob and Siti Hajar, Yusoff and Nur Shahida, Midi and Musse Muhamud, Ahmed (2018) Wide range modulation indexes featuring carrier-based PWM Stepped waveform for half-bridge modular multilevel Converters. IIUM Engineering Journal, 19 (2). pp. 43-53. ISSN 1511-788X

Manchuri, Amaranadha Reddy (2018) Production, Optimization and Performance Analysis of Jatropha Biodiesel using Nano CaO Catalyst Synthesized from Polymesoda erosa Seashells. PhD thesis, Universiti Malaysia Sarawak (UNIMAS).

Marini, Sawawi and Nor Umirah, Sudirman and Siti Kudnie, Sahari and Mahshuri, Yusof and Magdalene, Andrew-Munot and Nur Tahirah, Razali and Rohana, Sapawi and Kuryati, Kipli (2018) The Effect of Silane Treatment on Rice Husk / Phenol Formaldehyde Particleboard Mechanical Properties. International Journal of Engineering and Technology (UAE), 7 (3.18). pp. 53-57. ISSN 2227-524X

Marta, Elizabeth (2018) 2D Iterative Inversion Technique Integrated With Chebyshev Low Pass Filter For Microwave Breast Imaging. Masters thesis, Universiti Malaysia Sarawak.

Maseri, H. and Selaman, O.S and Mannan, Mohammad Abdul and Taib, S.N.L. (2018) Performance of cylindrical detention pond (CDP) as depression storage under fully saturated condition. International Journal of Engineering & Technology, 7 (4). pp. 5996-6000. ISSN 2227-524X

Mat, D.A.A. and Affendi, A. and Zaidel, D.N.A. and Shafrida, Sahrani and Kismet, Hong Ping and Kipli, K. and Marzuki, A.S.W (2018) Design of Integrated Bandpass Filter-Vivaldi Antenna for Microwave Applications. International Journal of Electrical Engineering and Applied Sciences, 1 (2). ISSN 2600 - 7495

May, Raksmey and Siti Aishah, Sahul Hamid (2018) Physical Modeling Approach for Assessing the Effect of Climate Change on Groundwater at Coastal Area. In: International UNIMAS STEM EnCon2018, 12-14 September, 2018, Riverside Majestic Hotel.

Md. Faruk, Hossen and Sinin, Hamdan and Md. Rezaur, Rahman (2018) Improved Mechanical Properties Of Silane Treated Jute/Polyethylene/Clay Nanocomposites. Malaysian Applied Biology Journal, 47 (1). pp. 209-215. ISSN 0126-8643

Md. Faruk, Hossen and Sinin, Hamdan and Md. Rezaur, Rahman (2018) Investigation of the Acoustic Properties of Chemically Impregnated Kayu Malam Wood Used for Musical Instrument. Advances in Materials Science and Engineering, 2018. pp. 1-6. ISSN 1687-8434

Michelle Gian, Kah Shin and Then, Yi Lung and Tay, Fei Siang and Jubaer, Ahmed and Chamath Kalanaka, Vithanawasam (2018) A Game-Based Approach for Hemiplegia Lower Limb Rehabilitation. In: 2018 2nd International Conference on BioSignal Analysis, Processing and Systems (ICBAPS), 24-26 July 2018, Kuching, Malaysia.

Moh, Hioung Teck (2018) A Study on Internal Horizontal Drain with Caging under the Effect of Rainfall Infiltration. Masters thesis, Universiti Malaysia Sarawak.

Mohamad Faizrizwan, Mohd Sabri and Kumeresan, A. Danapalasingam and Mohd Fua’ad, Rahmat (2018) Improved Fuel Economy of Through-the-Road Hybrid Electric Vehicle with Fuzzy Logic-Based Energy Management Strategy. International Journal of Fuzzy Systems, 20 (8). pp. 2677-2692. ISSN 15622479

Mohamaddan, Shahrol and Ishak, N.Z. and Shanat, M. and Dawal, S.Z.M. (2018) Development of an Ankle Foot Orthosis for Hemiplegic Children. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-16). ISSN 2289-8131 (online)

Mohamaddan, Shahrol and Rasit, A.H. and Dawal, S.Z.M. (2018) Design of Mechanical Bracing Device for Clubfoot Treatment. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-16). pp. 91-95. ISSN 2289-8131 (online)

Mohamed, Shaaban (2018) Behavior of Power System Equilibrium Points in Dynamic Available Transfer Capability Calculation. Journal of Applied Science & Process Engineering, 5 (1). pp. 242-248. ISSN 2289-7771

Mohamed, Shaaban and Tan, Wen-Shan and Md Pauzi, Abdullah (2018) A multi-timescale hybrid stochastic/deterministic generation scheduling framework with flexiramp and cycliramp costs. International Journal of Electrical Power and Energy Systems, 99. pp. 585-593. ISSN 0142-0615

Mohammad, Masita and Ibrahim, Yakub and Zahira, Yaakob and Nilofar, Asim and Kamaruzzaman, Sopian (2018) Adsorption Isotherm of Chromium (VI) into Zncl2 Impregnated Activated Carbon Derived by Jatropha Curcas Seed Hull. IOP Conference Series: Materials Science and Engineering, 293 (1). pp. 1-6. ISSN 17578981

Mohammad Aliff, Abd Rahman (2018) Investigation of Oil Palm Harvesting Tools Design and Technique on Work Related Musculoskeletal Disorder. Masters thesis, Universiti Malaysia Sarawak.

Mohammad Ashaari, Kiprawi and Abdullah, Yassin and Syed Tarmizi, Syed Shazali and Shahidul, Islam and Mohd Azrin, Mohd Said (2018) Assessment of Cutting Profile of AISI 1095 by Using Infrared Radiation Approach. International Journal of Engineering & Technology, 7 (3.18). pp. 79-82. ISSN 2227524X

Mohammad Kamrul, Hasan and Ahmad Fadzil, Ismail and Shayla, Islam and Wahidah, Hashim and Musse, Mohamud Ahmed and Imran, Memon (2018) A Novel HGBBDSA-CTI Approach for Subcarrier Allocation in Heterogeneous Network. Telecommunication Systems, 2018. ISSN 10184864

Mohammad Zawawi, Rosman and Nurasiah Mira, Anuar and Nurul Syakeera, Nordin and Siti Farhanah, SM Johan and Chan, Chee Ming (2018) Beneficial reuse of dredged marine soils (DMS) with the inclusion of cement and granular material for engineering applications. Global Journal of Earth Science and Engineering, 5 (1). pp. 26-33. ISSN 2409-5710

Mohammed Enamul, Hoque and Kuryati, Kipli and Tengku Mohd Afendi, Zulcaffle and Rohana, Sapawi and Annie, Joseph and Wan Azlan, Wan Zainal Abidin and Siti Kudnie, Sahari (2018) Feature Extraction Method of Retinal Vessel Diameter. In: 2018 IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES), 3-6 Dec. 2018, Sarawak, Malaysia, Malaysia.

Mohammed Haji, Alhaji (2018) Removal of Recalcitrant Organic Pollutants from Pre-treated Palm Oil Mill Effluent using a Novel Cylindrical Column Immobilized Photocatalytic Reactor. PhD thesis, Universiti Malaysia Sarawak.

Mohammed Haji, Alhaji and Khairuddin, Sanaullah and Shanti Faridah, Saleh and Rubiyah, Baini and Soh, Fong Lim and Andrew Ragai, Henry Rigit and Khairul Anwar, Mohamad Said and Afrasyab, Khan (2018) Photo-oxidation of pre-treated palm oil mill Effluent using cylindricalcolumn immobilized photoreactor. Process Safety and Environmental Protection, 117. pp. 180-189. ISSN 0957-5820

Mohammed Haji, Alhaji and Khairuddin, Sanaullah and Shanti Faridah, Salleh and Rubiyah, Baini and Lim, Soh Fong and Andrew Ragai, Henry Rigit and Khairul Anwar, Mohamad Said and Afrasyab, Khan (2018) Photo-oxidation of pre-treated palm oil mill Effluent using cylindrical column immobilized photoreactor. Journal of Vinyl and Additive Technology, 117. pp. 180-189. ISSN 0957-5820

Mohd Danial, Bin Ibrahim and Norliza, Binti Marusman and Sunami, Yuta and Siti Nur Azizah, Binti Amran and Saad Salahuddin, Bin Musa and Ochiai, Masayuki and Su, Shiung Lam (2018) Characteristics of Modified Spiral Thrust Bearing through Geometries and Dimension Modifications. Tribology Online, 13 (6). pp. 334-339. ISSN 1881-2198

Mohd Danial, Ibrahim (2018) Microwave pyrolysis with KOH/NaOH mixture activation: A new approach to produce micro-mesoporous activated carbon for textile dye adsorption. Bioresource Technology, 266. pp. 1-10. ISSN 9608524

Mohd Danial, Ibrahim and S. N. A., Amran and Y. S, Yunos and A. Rahman, M. R. and Mohtar, M. Z. and Wong, L. K. and Azham, Zulkharnain (2018) Drag-Reduction Study and its Dynamic Characteristics on Recreational Speedboat Utilizing Simplified Shark Skin Design. International Journal of Engineering & Technology, 7 (3.7). pp. 460-463. ISSN 2227-524X

Mohd Danial, bin Ibrahim and S. N. A., Amran and Azham, bin Zulkharnain and Sunami, Yuta (2018) Streamlined vessels for speedboats: Macro modifications of shark skin design applications. In: AIP Conference Proceedings, 1 - 2 November 2017, University of Electro-Communications (UEC)Tokyo, Japan..

Mohd Danial, brahim and S., Zainal and Al-Khalid, Othman (2018) Low Cost Solar Powered Telecenters for Malaysian Rural Areas : Case Study in Pos Sinderut, Pahang, Malaysia. International Journal of Engineering & Technology, 7 (4.14). pp. 421-425. ISSN 2227-524X

Mohd Farid, Bin Atan (2018) Certificate as a presenter at the 1st International Conference on Innovative Sciences and Technologies for Research and Educaation (InnoSTRE) 2018. [Certificate] (Unpublished)

Mohd Farid, Bin Atan (2018) Certificate of Participation as Presenter at the 1st International Conference on Innovative Sciences and Technologies for Research and Education (InnoSTRE. [Certificate]

Mohd Farid, Bin Atan and Mohd Azlan, bin Hussain and Nazeri, Bin Abdul Rahman (2018) Past And Current Development Of Two-Phase Modeling Of Polypropylene In Gas Phase Fluidized Bed Reactor : A Review. In: 1 st International Conference on Innovative Sciences and Technologies for Research and Education (InnoSTRE), 18-20 Disember 2018, Riverside Majestic Hotel, Kuching, Sarawak.

Muhammad Khusairy, Bakri and Elammaran, Jayamani and Sinin, Hamdan and Md Rezaur, Rahman and Akshay, Kakar (2018) Potential of Borneo Acacia wood in fully biodegradable bio-composites’ commercial production and application. Polymer Bulletin. pp. 1-22. ISSN 01700839

Muhammad Qasim, Khan and Musse, Mohamud Ahmed and Ahmed Mohamed, Ahmed Haidar and Norhuzaimin, Julai and Mohammad Kamarul, Hassan (2018) Synchrophasors Based Wide Area Protection and Phasor Estimation : A Review. In: 2018 IEEE International Conference on Power and Energy (PECon2018), 3-4 December 2018, Berjaya Times Square Hotel, Kuala Lumpur.

Muhammad Syukri, Imran and Azhaili, Baharun and Siti Halipah, Ibrahim and Wan Azlan, Bin Wan Zainal Abidin (2018) Bioclimatic Home Cooling Design For Acceptable Thermal Comfort In Malaysian Climate. Malaysian Construction Research Journal, 25 (2). pp. 1-12. ISSN 19853807

Muhammad Zaidi, Mohtar (2018) Analysis of Blower Inside Biosafety Cabinet Class II A2 Using Computational Fluid Dynamics and Experimental Verifications. Masters thesis, Universiti Malaysia Sarawak.

Muhatifah, Mohd Salleh and Mohd Hafiez, Izzwan Saad and Yanuar, Z. Arief and Nor Asiah, Muhamad (2018) Water Tree Simulation on Underground Polymeric Cable Using Finite Element Method. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-12). pp. 107-112. ISSN 2289-8131 (online)

Muna, Binti Sabri and Elizabeth Jega, Anak Jenggut and Ramlah, Binti Zainudin and Zunika, Binti Amit (2018) Antimicrobial Activity Of Partially Purified Peptides Isolated From The Skin Secretions Of Bornean Frogs In The Family Of Ranidae. Malaysian Applied Biology, 47 (6). pp. 1-8. ISSN 0126-8643

Musse, Mohamud Ahmed and Mohammad Kamrul, Hasan and Mohammad, Shafiq (2018) Development of Automatic Solar Tracking System for small Solar Energy System. International Journal of Engineering and Technology (UAE), 7 (3.18). pp. 11-15. ISSN 2227-524X

N

NABILAH, OMAR (2018) THE DESIGN OF RECTANGULAR PATCH ANTENNA AT 28GHZ FOR 5G APPLICATION. [Final Year Project Report] (Unpublished)

NADIA NICOLE, ALDRIN (2018) ENERGY-EFFICIENT MOBILITY MANAGEMENT FOR 5G HETEROGENEOUS NETWORKS. [Final Year Project Report] (Unpublished)

NG, YENG CHIA (2018) Performance Evaluations of Various Schedulers for Vehicular Small Cell Networks. [Final Year Project Report] (Unpublished)

NORHASLINDA, MUAIDI (2018) THE MAXIMUM POWER POINT TRACKING (MPPT) ANALYSIS FOR THE BUILDING ATTACHED PHOTOVOLTAIC (BAPV) AT PUSAT ISLAM TUN ABANG SALAHUDDIN (PITAS). [Final Year Project Report] (Unpublished)

NUR IZZIANI, ROSLAN (2018) TRANSIENT OVERVOLTAGE ON 500 KV TRANSMISSION LINE PLAN IN SARAWAK USING POWER SYSTEM COMPUTER AIDED DESIGN. [Final Year Project Report] (Unpublished)

NUR JIHAN NAZIHAH, AMIN (2018) QUANTIFICATION OF GREENHOUSE GASES EMISSION FROM COMPOSTED COMMODITY WASTES IN SARAWAK. [Final Year Project Report] (Unpublished)

NUR LIYANA, MOHD HASSAN (2018) GALVANIZED IRON, AN ALTERNATIVE FOR COPPER AS EARTHING ELECTRODE AND JOINT CABLE. [Final Year Project Report] (Unpublished)

NURHALIDA, JUNAIDI (2018) MOBILE QUEUING SOLUTION ON ANDROID. [Final Year Project Report] (Unpublished)

NURRIZZUWANNI, BINTI HAIRUDDIN (2018) ANALYSIS OF SPOT SPEED STUDIES AT KUCHING OUTER RING ROAD, KOTA SAMARAHAN : A CASE STUDY. [Final Year Project Report] (Unpublished)

NURUL MIRZA AFIQAH, TAJUDIN (2018) HOME AQUARIUM CONTROLLER USING ARDUINO. [Final Year Project Report] (Unpublished)

Nabilah, Abdul Jaffar and Kasumawati, Lias and Nina Korlina, Madzhi and Norlida, Buniyamin (2018) An Overview of Metamaterials Used in Applicators in Hyperthermia Cancer Treatment Procedure. 2017 International Conference on Electrical, Electronics and System Engineering (ICEESE), 2018. pp. 32-36. ISSN ISBN: 978-1-5386-0908-8

Nadziri, Nurulhuda and Idawati, Ismail and Sinin, Hamdan (2018) Binding gel characterization of alkali-activated binders based on palm oil fuel ash (POFA) and fly ash. Journal of Sustainable Cement-Based Materials, 7 (1). pp. 1-14. ISSN 2165-0373

Nakano, Shunsuke and Zhang, Sheng and Mohd Danial, Bin Ibrahim and Sunami, Yuta and Hashimoto, Hiromu (2018) Tactile Sliding Behavior on Biomedical Devices in Skin Application of PDLLA Ultrathin Film Produced by Roll-to-Roll Production Method. In: Proceedings of the Autumn Tribology Conference Ise, 2018, 7-9th November 2018, Ise Tourism and Culture Center, Japan.

Naser, A. N. Muhaisen and Sheroz, Khan and Zeyad, M.A. Ismail and Mohamed, H. Habaebi and Nabil, A. Ahmed and Musse, Mohamud Ahmed (2018) Simulation Analysis for Maximizing Renewable Solar Energy to Improve the Power Generation Capacity in the State of Kuwait. 2017 IEEE 3rd International Conference on Engineering Technologies and Social Sciences, ICETSS 2017, 2018. pp. 1-6. ISSN ISBN: 978-1-5386-1611-6

Nazreen, Junaidi and Mohamed, Shaaban (2018) Big Data Applications in Electric Energy Systems. 2018 International Conference on Computational Approach in Smart Systems Design and Applications (ICASSDA), 2018. pp. 1-5. ISSN ISBN: 978-1-5386-8369-9

Ngie, David Chua Sing and Shahrol, Mohamaddan and Shirley, Jonathan Tanjong and Abdullah, Yassin and Lim, Soh Fong (2018) Detection of Bond Pad Discolorations at Outgoing Wafer Inspections. IEEE Transactions on Semiconductor Manufacturing, 31 (1). pp. 144-148. ISSN 0894-6507

Nickholas, Anak Anting and Mohd Fadhil, Md Din and Kenzo, Iwao and Mohanadoss, Ponraj and Lim, Alvin John Meng Siang and Lee, Yee Yong and Prasetijo, J. (2018) Optimizing of near infrared region reflectance of mix-waste tile aggregate as coating material for cool pavement with surface temperature measurement. Energy and Buildings, 158. pp. 172-180. ISSN 0378-7788

Nik Amni Fathi, Nik Zaini Fathi (2018) Growth of Interfacial Layer between Germanium and Aluminium Oxide. Masters thesis, Universiti Malaysia Sarawak.

Nor Hasmaliana, Abdul Manas and Rosli, Md. Illias and Nor Muhammad, Mahadi (2018) Strategy in manipulating transglycosylation activity of glycosyl hydrolase for oligosaccharide production. Critical Reviews in Biotechnology, 38 (2). pp. 272-293. ISSN 0738-8551

Norazlina, Bateni and Sai, Hin Lai and Putuhena, Frederik Josep and Mah, D.Y.S. and Md Abdul, Mannan (2018) A Rainfall Simulator Used for Testing of Hydrological Performances of Micro-Detention Permeable Pavement. International Journal of Engineering and Technology, 7 (3.18). pp. 44-48. ISSN 2227-524X

Norazzlina, M.Sa’don and Abdul Razak, Abdul Karim and Siti Noor Linda, Taib and Mahshuri, Yusof (2018) Strength Properties of Reinforced Peat using Fiber-polyester and Shredded Rubber-Crumb as Reinforcement Material. International Journal of Engineering & Technology, 7 (3.18). pp. 26-30. ISSN 2227-524X

Norhuzaimin, Julai and Ahmed Mohamed, Ahmed Haidar and Abdul Rahman, Kram (2018) The analysis of soft error in c-elements. Indonesian Journal of Electrical Engineering and Computer Science, 10 (3). pp. 1013-1022. ISSN 25024752

Norman Baggio, Francis (2018) Development Of Preliminary Design For Tidal Power Plant At Kuching Barrage. [Final Year Project Report] (Unpublished)

Norsuzailina, Mohamed Sutan and Nur Izaitul Akma, Ideris and Siti Noor Linda, Taib and Teo, Delsye Ching Lee and Alsidqi, Hassan and Siti Kudnie, Sahari and Khairul Anwar, Mohamad Said and Sobuz, Habibur Rahman (2018) Microstructural characterization of catalysis product of nanocement based materials A review. International Conference on Civil & Environmental Engineering, 34 (01039). pp. 1-7. ISSN 2267-1242

Norsuzailina, Mohamed Sutan and Siti Masjida, Mazlan and Siti Noor Linda, Taib and Teo, Delsye Ching Lee and Alsidqi, Hasan and Siti Kudnie, Sahari and Khairul Anwar, Mohamad Said and Habibur Rahman, Sobuz (2018) Biomass Morphology Subjected to Different Chemical Treatment. E3S Web of Conferences, 34. pp. 1-8. ISSN 2267-1242

Nur Amalina Shairah, Abdul Samat and Haslinda, Zabiri and Bashariah, Kamaruddin (2018) The Development And Investigation Analysis Of An Arx-Based Generalized Likelihood Ratio (GLR) Stiction Detection Method. Jurnal Teknologi, 80 (4). pp. 1-16. ISSN 2180–3722 (online)

Nur Amalina Shairah, Abdul Samat and Siti Aishah, Zulkafly and Ummie Zulaikha, Kamarul Jaman and Nur Syuhada, Ahmad Zauzi and Md Rezaur, Rahman and Rubiyah, Baini (2018) Characteristics Analysis of Bio Based Silica Extracted from Sarawak Palm Oil Waste. International Journal of Engineering & Technology, 7 (3.18). pp. 94-96. ISSN 2227524X

Nur Tahirah, Razali and Khairunisa, Kamarudin and Inaba, Shusei and Mahshuri, Yusof and Yeng, Weng Leong and Varun, Vohra (2018) Effect of Spraying Parameters on the Morphology of Spray-Coated Active Layers for Organic Solar Cells. International Journal of Engineering & Technology, 7 (3.18). pp. 75-78. ISSN 2227-524X

Nurasiah Mira, Anuar and Chan, Chee Ming and Siti Farhanah, SM Johan (2018) An innovative sanitary landfill system with dredged marine soils (DMS) as liner material: Geoenvironmental studies. International Journal of GEOMATE, 14 (41). pp. 181-185. ISSN 2186-2990

Nurdiani, Zamhari (2018) Certificate as a presenter at at the International Conference on Science, Engineering & Technology (ICSET). [Certificate] (Unpublished)

Nurdiyana, Zakariah (2018) Effects Of Chemical Treatment On The Mechanical Properties Of Sugarcane Bagasse / Urea Formaldehyde Particleboard. [Final Year Project Report] (Unpublished)

Nurlaila, Rosli and Nordiana, Rajaee and Bong, David B L (2018) Renica based music source separation for automatic Music emotion classification. International Journal of Innovative Computing, Information and Control, 14 (6). pp. 2325-2333. ISSN 1349-4198

Nursyamil Haziq, Ahmad (2018) Bioethanol From Ubi Gajah As A Fuel Additive For Engine. [Final Year Project Report] (Unpublished)

Nurulhuda, Nadziri (2018) Microstructural and Durability of Alkali Activated Binders Based on Palm Oil Fuel Ash (POFA) and Fly Ash. Masters thesis, Universiti Malaysia Sarawak.

O

ONG, CHENG EE (2018) KINETIC STUDY AND STATISTICAL MODELLING OF SARAWAK PEAT WATER CONTINUOUS ELECTROCOAGULATION TREATMENT PROCESS USING ALUMIMIUN ELECTRODES. [Final Year Project Report] (Unpublished)

P

PATRICK, AJAI (2018) INVESTIGATION ON THE EFFECTIVENESS OF BIO-SILICA PRODUCED FROM SARAWAK BARIO RICE HUSK ASH (BRHA) AS SORBENTS. [Final Year Project Report] (Unpublished)

PUA, ZE LONG (2018) IMAGE SCENE RECONSTRUCTION FROM DASHCAM VIDEO. [Final Year Project Report] (Unpublished)

Pang, Lie Meng (2018) Monotone Fuzzy Rule Relabeling for the Zero-Order TSK Fuzzy Inference System. PhD thesis, Universiti Malaysia Sarawak.

Pei-Fang, Tee and Mohammad Omar, bin Abdullah and Tan, Ivy A. W. and Mohamed Afizal, bin Mohamed Amin and Nolasco-Hipólito, Cirilo and Kopli, bin Bujang (2018) Bio-energy generation in an affordable, single-chamber microbial fuel cell integrated with adsorption hybrid system: effects of temperature and comparison study. Environmental Technology (United Kingdom), 39 (8). pp. 1081-1088. ISSN 0959-3330

Q

Qurratu-Aini, Sirat and Dayangku Salma, Binti Awang Ismail and Azman, Bin Kassim and Ahmad Safuan, Bin A. Rashid (2018) Application of distributed optical fibre for shallow foundation. MATEC Web of Conferences, 250 (01019). pp. 1-12. ISSN 2557-0250

R

R., Salim and Syed Tarmizi, Bin Syed Shazali and Sinin, Bin Hamdan and Magdalene, Anak Andrew Munot and A. M. A. A. M., Mohtar (2018) A Review on Ruben’s Tube as Acoustic Propagator. International Journal of Automotive and Mechanical Engineering, 15 (4). pp. 6025-6033. ISSN 2180-1606

RASYIDAH, ABDUL RAHMAN (2018) PHYTOREMEDIATION IN REMOVAL OF AMMONIACAL NITROGEN BY USING EICCHORNIA CRASSIPES. [Final Year Project Report] (Unpublished)

Rahim Noor, Yusuf (2018) Phase Analyisis Of KNN Type Piezoelectric Material. [Final Year Project Report] (Unpublished)

Raudhah, Ahmadi and Mohd Syukry, Saiful and Dzul Fahmi, Zawawi and Shahrul Zaman, Abdul Rahman and Idawati, Ismail and Mohamad, Abdul Mannan and Ana Sakura, Zainal Abidin and Fadzli, Mohamed Nazri (2018) Evaluation of Microfine Palm Oil Fuel Ash (POFA) as Cement Partial Replacement Material for Mitigation of Chloride Attack. International Journal of Engineering and Technology (UAE), 7 (3.18). pp. 58-61. ISSN 2227-524X

Reddy, A. N.R. and Abu Ahmed, Saleh and Md Saiful, Islam and Sinin, Hamdan and Md Rezaur, Rahman and Haji Hassan, Masjuki (2018) Experimental evaluation of fatty acid composition influence on Jatropha biodiesel physicochemical properties. Journal of Renewable and Sustainable Energy, 10 (1). ISSN 19417012

Roslan, L. and Ibrahim, M.D (2018) Flow Simulation and Experiment for Preventing Defects in Die Casting. In: Japan Die Casting Congress, 8-10 Nov 2018, Japan.

Rudiyanto, Philman Jong and Khairul Fikri, bin Tamrin (2018) Implementation of Problem Based Learning Component for Open-Ended Engineering Laboratory: Early Comparison on Students’ Performance. (Unpublished)

Rudiyanto, Philman Jong and Khairul Fikri, bin Tamrin (2018) Implementation of Problem Based Learning Component for Open-Ended Engineering Laboratory: Early Comparison on Students’ Performance. Borneo International Journal, 1 (1). pp. 9-14. ISSN 2636-9826

S

S.A., Adamu and T., Masri and Wan Azlan, Wan Zainal Abidin and Kismet, Hong Ping and S. A., Babale (2018) High-Gain Modified Antipodal Vivaldi Antenna for Ultra-Wideband Applications. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-12). pp. 55-59. ISSN 2289-8131 (online)

SHALINI, PANISELVAM (2018) OPTIMIZATION STUDY ON PREPARATION OF ACTIVATED CARBON FROM ORANGE PEEL USING MICROWAVE INDUCED KOH ACTIVATION. [Final Year Project Report] (Unpublished)

SHAMMINI, M. DORAISAMY (2018) ENERGY PINCH ANALYSIS OF PALM OIL MILL. [Final Year Project Report] (Unpublished)

SHERFRIZ SHERRY, MUSA (2018) CALIBRATION OF TRANSMISSION LINE THERMAL MODEL OF THE DYNAMIC THERMAL CURRENT RATING SOFTWARE IN WIDE AREA MEASUREMENTS SYSTEM. [Final Year Project Report] (Unpublished)

SIM, SIEW MING (2018) OPTIMIZATION AND KINETIC STUDY OF PLECTRANTHUS AMBOINICUS ESSENTIAL OIL EXTRACTION. [Final Year Project Report] (Unpublished)

SITI NOOR ATIKAH, IHWAN (2018) ASSESSING THE BOLTED CONNECTION STRENGTH OF DRYOBALANOPS. [Final Year Project Report] (Unpublished)

SITI NORSHALINA, MOHD SHAZILI (2018) REAL-TIME SMART GAS LEAKAGE DETECTION AND MONITORING SYSTEM USING INTERNET OF THINGS (IoT). [Final Year Project Report] (Unpublished)

STANLEY, ANTHONY NYOEL (2018) HEAT EVOLUTION OF ETHANOL FERMENTATION USING SACCHAROMYCES CEREVISIAE CSI-1. [Final Year Project Report] (Unpublished)

Saad Salahuddin, Bin Musa and Mohd Danial, Bin Ibrahim and Rudiyanto, Bin Philman Jong (2018) Modified Turning Vanes in Air Distribution System of HVAC for Thermodynamics Lab. International Journal of Engineering & Technology, 7 (3.7). pp. 482-485. ISSN 2227-524X

Saaid, M.N.F and Ayob, M.A. and Yunus, A.I.A and Razali, A.W. and Maarof, K.A (2018) The Challenges of Space Management in Higher Education Institution. IOP Conference Series: Materials Science and Engineering, 429 (1). ISSN 1757-8981

Sadia, Tasnim and Muhammad Ekhlasur, Rahman and Raudhah, Ahmadi (2018) Mechanical performance of modified cement paste made with micro-fine POFA in ammonium nitrate environment. Construction and Building Materials, 162. pp. 534-542. ISSN 09500618

Sahari, S.K. and Abdul Halim, N.A. and Kashif, M. and Marini, Sawawi and Sapawi, R. and Kipli, K. and Junaidi, N. (2018) Surface Analysis of Thermally Growth Ge Oxide on Ge (100). Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-12). pp. 61-64. ISSN 2289-8131 (online)

Said, K.A.M. and Jamain, R.L. and Sutan, N.S.M and Alipah, N.A.M (2018) Enhanced permeation performance with incorporation of silver nitrate onto polymeric membrane. Journal of Mechanical Engineering and Sciences, 12 (3). pp. 3811-3824. ISSN 2231-8380

Salisu, Muhammad Lawan and Wan Azlan, Wan Zainal Abidin (2018) Wind energy assessment and mapping using terrain nonlinear autoregressive neural network (TNARX) and wind station data. Cogent Engineering, 5 (1). pp. 1-21. ISSN 2331-1916

Salisu Muhammad, Lawan and Wan Azlan, Bin Wan Zainal Abidin and Abubakar, U. (2018) Wind Speed Prediction in Non-Monitored Areas Based on Topographic Radial Basis Neural Network (T-RBNN). IOP Conference Series: Earth and Environmental Science, 168. pp. 1-8. ISSN 17551307

Sang, Anisia J. and Tay, Kai Meng and Chee, P. Lim and Saeid, Nahavandi (2018) Application of a Genetic-Fuzzy FMEA to Rainfed Lowland Rice Production in Sarawak: Environmental, Health, and Safety Perspectives. IEEE Access, 6. pp. 74628-74647. ISSN 21693536

Seniorita Bandy, Ak Kerungan @ Engkasan (2018) Solar Potential and Photovoltaic System Capacity Estimation for Sarawak based on Empirical Model and r.sun Module in GRASS. Masters thesis, Universiti Malaysia Sarawak.

Senthilkumar, K.S. and Pirapaharan, K. and Norhuzaimin, Julai and Hoole, P.R.P and Othman, Al-Hj and Harikrishnan, R. and Hoole, S.R.H. (2018) Perceptron ann control of array sensors and transmitters with different activation functions for 5G wireless systems. 2017 International Conference on Signal Processing and Communication (ICSPC), 2018. pp. 107-111. ISSN ISBN: 978-1-5090-6730-5

Shafrida, Sahrani and Nor Shafrillah, Isa and Kismet, Anak Hong Ping and Tatsuya, Akata and Michiko, Kuroda (2018) Electromagnetic Field Scattering of a High Speed Moving Source and Its Application. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-12). pp. 103-106. ISSN 2289-8131 (online)

Shahidul, Islam and Malcolm, M. L. and Eugene, J. J. (2018) Methane production potential of pome: a review on Waste-to-energy [WTE] Model. Journal of Sci.Int.(Lahore), 30 (5). pp. 717-728. ISSN 1013-5316

Shahrol, Mohamaddan and Handie, Ahmataku and Emilda, Warren and Mahshuri, Yusof and Aidil Azli, Alias and Nor Hasmaliana, Abdul Manas and Kuryati, Kipli (2018) Analysis of Gate Poly Delayering in SOI Wafer. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-12). pp. 85-87. ISSN 2180-1843

Shamsiah, Binti Suhaili and Watanabe, Takahiro (2018) Design of high-throughput SHA-256 hash function based on FPGA. 2017 6th International Conference on Electrical Engineering and Informatics (ICEEI), 2018. pp. 1-6. ISSN 2155-6830

Shamsiah binti, Suhaili and Watanabe, Takahiro and Maimun, Binti Huja Husin and Kuryati, Binti Kipli and Norhuzaimin, Bin Julai and Rohana, Binti Sapawi (2018) High Throughput Implementation of RIPEMD-160 using Unfolding Transformation. In: INNOVATIVE RESEARCH AND INDUSTRIAL DIALOGUE 2018, 18 July 2018, Universiti Teknikal Malaysia, Melaka.

Sharip, M.R.M. and Zaidel, D.N.A. and Saad, M.H.I. and Abdullah, A.S. and Hashim, N.I. and Rahman, A.K. (2018) Effect of Interphase Region and Neighboring Particles on Electric Field Intensity within Nanocomposite Systems. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-12). pp. 79-83. ISSN 2289-8131 (online)

Shayla, Islam and Aisha, Hassan Abdalla Hashim and Abdur, Razzaque and Mohammad Kamrul, Hasan (2018) A Numerical Model to Analyze Handoff Delay and Packet Loss in PNEMO Environment. In: 7th International Conference on Computer and Communication Engineering (ICCCE), 19-20 September 2018, Kuala Lumpur, Malaysia.

Shayla, Islam and Aisha, Hassan Abdalla Hashim and Farah Nadia, Mohd Isa and Mohammad Kamrul, Hasan (2018) Performance Evaluation of Multi-Interfaced Fast Handoff Scheme for PNEMO Environment. Elektronika Ir Elektrotechnika, 24 (5). pp. 80-85. ISSN 13921215

Shirley, Anak Jonathan Tanjong and Raafat, N. Ibrahim and Mali, Abdollahian and Magdalene, Andrew-Munot (2018) Estimating Non Conformance Using the Modified Tolerance Region Method and the Target Distance Method. International Journal of Engineering & Technology, 7 (3.18). pp. 68-74. ISSN 2227524X

Shyh Yau, Tein and Yi Lung, Then and Hieng Tiong, Su (2018) Tea leaves moisture measurement and prediction using RF waveguide antenna. In: IEEE Asia Pacific Microwave Conference (APMC), 13-16 November 2017, Kuala Lumpur.

Shyue, Leong Lee and Mohammad, Abdul Mannan and Wan Hashim, Bin Wan Ibrahim (2018) Polishing resistance of polymer concrete pavement using limestone aggregate. International Journal of Pavement Engineering. pp. 1-10. ISSN 1477-268X

Sia, C.V and Fernando, L. and Joseph, A. and Chua, S.N. (2018) Modified Weibull analysis on banana fiber strength prediction. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3461-3471. ISSN 2231-8380 (Online)

Sinin, Hamdan and Md Rezaur, Rahman and Ismail, Jusoh and Hasnizam, Abdul Wahid (2018) Dynamic Young’s Modulus and Moisture Content of Tropical Wood Species across Sap, Median, and Internal Wood Regions. BioResources, 13 (2). pp. 2907-2915. ISSN 1930-2126

Sinin, Hamdan and Ahmad Fauzi, Musib and Iran Amri, Musoddiq and Hasnizam, Abdul Wahid and Saiful Hairi, Othman (2018) Timbral Spectogram of The Bonang From Malaysian Gamelan. International Journal of Innovative Design, Creativity and Social Sciences, 2 (2). pp. 1-7. ISSN 2600-8785

Sinin, Hamdan and Md Rezaur, Rahman and Ismail, Jusoh and Hasnizam, Abdul Wahid (2018) Dynamic Young's modulus and moisture content of tropical wood species across Sap, median, and internal wood regions. BioResources, 13 (2). pp. 2907-2915. ISSN 1930-2126

Siti, Nikmatin and Bambang, Hermawan and Irmansyah, Irmansyah and Mohammad, Nur Indro and Ahmad Kueh, Beng Hong and Achmad, Syafiuddin (2018) Evaluation of the Performance of Helmet Prototypes Fabricated from Acrylonitrile Butadiene Styrene Composites Filled with Natural Resource. Materials, 12 (34). pp. 2-12. ISSN 1996-1944

Siti Farhanah, SM Johan and Chan, Chee Ming (2018) Effect of granular inclusions on the consolidation rate of dredged marine clay. Malaysian Construction Research Journal, 5 (3). pp. 73-80. ISSN 2590 - 4140

Siti Halipah, Binti Ibrahim and M. N. S., Suri and Khatijah, Binti Yaman and R., Abdul Wahab and Jethro, Anak Henry Adam (2018) Low-Cost Tap Water Purification System (Loco Device). In: International UNIMAS STEM Engineering Conference 2018, "Realizing The 4th Industrial Revolution In Engineering And Built Environment", 12 – 13 September 2018, Kuching, Sarawak..

Siti Halipah, Binti Ibrahim and Nurul Izzati, Binti Ahmat Ibrahim and Julaihi, Bin Wahid and Nurakmal Abdullah, @ Goh Tuo Ho and Dona Rose, Binti Koesmeri and Mohd Nasrun, Bin Mohd Nawi (2018) The Impact Of Road Pavement On Urban Heat Island (UHI) Phenomenon. International Journal of Technology, 8. pp. 1597-1608. ISSN 2086-9614

Siti Halipah, Ibrahim and Julaihi, F. and Azhaili, Baharun and Koesmeri, D.R. and Mohd Nasrun, Bin Mohd Nawi (2018) Investigating the Performance of Indoor Environment and Energy Management Implementation System in Office Building. Ekoloji, 27 (106). pp. 87-94. ISSN 1300-1361

Siti Halipah, Ibrahim and Nadia, Zaini and Azhaili, Baharun and Afzan Ahmad, Zaini and Dona Rose, Binti Koesmeri and Mohd Nasrun, Bin Mohd Nawi and Faizal, Baharum (2018) Embodied Energy and CO2 Analysis of Industrialised Building System (IBS) and Conventional Building System. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 51 (2). pp. 259-266. ISSN 2289-7879

Siti Halipah, Ibrahim and Qairuniza, Roslan and Rohaida, Affandi and Abdul Wafi, Razali and Yon Syafni, Samat and Mohd Nasrun, Mohd Nawi (2018) Study On The Optimum Roof Type With 30° Roof Angle To Enhance Natural Ventilation And Air Circulation Of A Passive Design. International Journal of Technology, 8. pp. 1692-1701. ISSN 2086-9614

Siti Noor Linda, Taib and Kolay, Prabir K (2018) Physical and Geotechnical Properties of Tropical Peat and Its Stabilization. In: Physical and Geotechnical Properties of Tropical Peat and Its Stabilization. IntechOpen, pp. 93-105.

Siti Nor Linda, Binti Taib and Striprabu, Strimari and Fauziah, Binti Ahmad and Foo, Kelvin Chin Yen and Khor, Brandon Ling Seong (2018) Study On Influence Of Moisture Content In Cement Stabilized Serian Soil. MCRJ Special Issue, 5 (3). pp. 174-183. ISSN 2590 - 4140

Soh, Fong Lim and Yung, Agnes Weng Lee and Yat, Seng Kam and Chua, David Sing Ngie (2018) Synthesis and Characterization of Alginate Encapsulated Zirconium-Based Ferromagnetic Sorbent for Adsorptive Removal of Dyes. International Journal of Engineering and Technology (UAE), 7 (3.18). pp. 87-90. ISSN 2227-524X

Sohiful Anuar, Zainol Murad and Azizi, Harun and Muhammad Mahyiddin, Ramli and Mohd Nazrin, Md Isa and Rohana, Sapawi (2018) High Speed Low Power CMOS Comparator using Forward Body Bias Technique in 0.13 µm Technology. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 10 (3). pp. 25-29. ISSN 2180-1843

Striprabu, A/L Strimari (2018) Behaviour of Sarawak Clayey Soil using Various By-Product Additives Stabiliser for Potential Subgrade Materials. Masters thesis, Universiti Malaysia Sarawak.

Striprabu, S. and Siti Noor Linda, Taib and Norazzlina, M.Sa'don and Fauziah, Ahmad (2018) Chemical Stabilization of Sarawak Clay Soil with Class F Fly Ash. Journal of Engineering Science and Technology, 13 (10). pp. 3029-3042. ISSN 1823-4690

Syahrun Neizam, Mohd Dzulkifli and Abd Halid, Abdullah and Lee, Yee Yong and Abdul Mutalib, Leman and Samiullah, Sohu (2018) A Study of Indoor Air Quality in Refurbished Museum Building. Civil Engineering Journal, 4 (11). pp. 2596-2605. ISSN 2476-3055

Syahrun Neizam, Mohd Dzulkifli and Abd Halid, Abdullah and Lee, Yee Yong and Mohd Mahathir, Suhaimi Shamsuri and Zawawi, Daud (2018) Classification of Potential Risk Factors through HIRARC Method in Assessing Indoor Environment of Museums. International Journal of Integrated Engineering, 10 (8). pp. 43-55. ISSN 2600-7916

Syed Salman, Shafqat and Maria, Nosheen and Amir Azam, Khan and Syed Rizwan, Shafqat and Shahzad, Murtaza and Muhammad, Zubair and Muhammad Nadeem, Zafar (2018) Removal of Congo Red Dye from Aqueous Solution using Branches of Ficus religiosa. Malaysian Applied Biology Journal, 47 (1). pp. 103-108. ISSN 0126-8643

T

Tamrin, K. F. and Adilah, A.N. and Hamdi, M. M. and Rudiyanto, P. J. (2018) Smartphone-based laser glucometer for non-invasive measurement of glucose level of diabetic patients. Borneo International Journal, 1 (1). pp. 27-31. ISSN 2636-9826

Tamrin, K. F. and Sheikh, N. A. and Rizduan, M. S. M and Nadirah, A. N. (2018) Multiple-Objective Optimization Techniques in Laser Joining of Dissimilar Materials Classes: A Comparison between Grey and Ratio Analyses. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 10 (1-12). pp. 13-18. ISSN 2180-1843

Tamrin, K.F. and Zakariyah, S.S. and Hossain, K.M.A. and Sheikh, N.A. (2018) Experiment and prediction of ablation depth in excimer laser micro-machining of optical polymer waveguides. Advances in Materials Science and Engineering, 2018. pp. 1-9. ISSN 16878442, 16878434

Tan, Ann Nie (2018) Design And Fabrication Of Sleep Apnea Device. [Final Year Project Report] (Unpublished)

Tan, Aurereas Kheng Tzeh (2018) PREPAID ENERGY METER SYSTEM (ANDROID APPLICATION) AUREREAS TAN KHENG TZEH. [Final Year Project Report] (Unpublished)

Tan, Ger Lian (2018) Test Piece With Double Path Runner System Using Magnesium Molten For High Precision Die-Casting Products. [Final Year Project Report] (Unpublished)

Tan, Ivy A. W. (2018) Certificate of Participation Presented to Ivy Tan Ai Wei. [Certificate] (Unpublished)

Tan, Wen-Shan and Md Pauzi, Abdullah and Mohamed, Shaaban (2018) A day-ahead generation scheduling with demand response considering thermal cycling ramp. 2017 IEEE Conference on Energy Conversion (CENCON), 2018. pp. 212-217. ISSN ISBN: 978-1-5386-3935-1

Tay, Chen Chiang (2018) Physical, Mechanical and Thermal Properties of Sago Fiber Reinforced Composite Particleboard. PhD thesis, Universiti Malaysia Sarawak (UNIMAS).

Teh, Chin Ying (2018) Modelling of Data-Driven Monotone Zero-Order TSK Fuzzy Inference System. PhD thesis, Universiti Malaysia Sarawak.

Tengku Mohd Afendi, Zulcaffle and Kurugollu, F., and Crookes, D., and Bouridane, A., and Farid, M. (2018) Frontal view gait recognition with fusion of depth features from a time of flight camera. Frontal view gait recognition with fusion of depth features from a time of flight camera, 14 (4). pp. 1067-1082. ISSN 15566013

Tin, John Yuan En (2018) Development of Adaptive Thermal Comfort Models for Residential Buildings in Sarawak Urban Areas. PhD thesis, Universiti Malaysia Sarawak (UNIMAS).

Ting, W. H.T. and Tan, I. A.W. and Salleh, Shanti Faridah and Wahab, N. A. (2018) Application of water hyacinth (Eichhornia crassipes) for phytoremediation of ammoniacal nitrogen: A review. Journal of Water Process Engineering, 22. pp. 239-249. ISSN 22147144

Ting, Wee Kiet and Alsidqi, Hasan and Fauzan, Sahdi and Siti Noor Linda, Taib and Norsuzailina, Mohamed Sutan and Badrulhisham, Abdul Aziz (2018) Interfacial friction behaviour in narrow wall paste backfill system. MCRJ Special Issue, 5 (3). pp. 52-56. ISSN 2590 - 4140

Ting, Winnie Huong Tien and Tan, Ivy Ai Wei and Shanti Faridah, Salleh and Noraziah, Abdul Wahab (2018) Phytoremediation Of Ammoniacal Nitrogen In Wastewater Using Eichhornia Crassipes : Tolerance Limit And Ph Study. Malaysian Applied Biology, 47 (1). pp. 29-35. ISSN 0126-8643

U

Ullah, A. and Jamil, I. and Gillani, S.S.J. and Hamid, A. and Sanaullah, K. (2018) Investigation on hydrodynamics of gas fluidized bed with bubble size distribution using Energy Minimization Multi Scale (EMMS) mixture model. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3451-3460. ISSN 2231-8380 (online)

Universiti Malaysia Sarawak (2018) Certificate of Participant for participating in the International UNIMAS STEM, EnCon 2018. [Certificate] (Unpublished)

Universiti Malaysia Sarawak, Centre for Graduate Studies (2018) Transcript 2018 - Doctor of Philosophy - Faculty of Engineering. [Transcript] (Unpublished)

Universiti Malaysia Sarawak, Centre for Graduate Studies (2018) Transcript 2018 - Master of Engineering - Faculty of Engineering. [Transcript] (Unpublished)

Universiti Malaysia Sarawak, Centre for Graduate Studies (2018) Transcript 2018 - Sarjana Kejuruteraan (Sistem Komunikasi) - Fakulti Kejuruteraan. [Transcript] (Unpublished)

Universiti Malaysia Sarawak, Centre for Graduate Studies (2018) Transcript 2018 - Sarjana Kejuruteraan (Sivil) - Fakulti Kejuruteraan. [Transcript] (Unpublished)

Universiti Malaysia Sarawak, Faculty of Engineering (2018) Convocation Ceremony : Healthcare Facility Management Certification Programme Session 2011/2018 (Program Book). [Magazine and Newsletter]

Universiti Malaysia Sarawak, Faculty of Engineering (2018) Pelan Strategik Fakulti Engineering 2014-2018. Universiti Malaysia Sarawak, (UNIMAS). (Unpublished)

V

VONG, PIK QUAN (2018) EFFICIENCY OF VARIOUS PERFORATED PIPE CONFIGURATION IN SLOPE DRAINAGE SYSTEM. [Final Year Project Report] (Unpublished)

VONG, PIK QUAN (2018) EFFICIENCY OF VARIOUS PERFORATED PIPE CONFIGURATION IN SLOPE DRAINAGE SYSTEM. [Final Year Project Report] (Unpublished)

Voo, Kenny H B and Bong, David B.L. (2018) Quality assessment of stereoscopic image by 3D structural similarity. Multimedia Tools and Applications, 77 (2). pp. 2313-2332. ISSN 13807501

W

Wahid, J. and Karsono, B. and Koesmeri, D. R.A. and Indriannisa, S. E. (2018) Revitalizing the unused urban space,case study : Lhokseumawe, Aceh -Indonesia. IOP Conference Series: Earth and Environmental Science, 126 (1). ISSN 17551307

Wan Adibah, Wan Mahari and Cheng, Tung Chong and Wei, Haur Lam and Tuan Nurul Sabiqah, Tuan Anuar and Nyuk, Ling Ma and Mohd Danial, Ibrahim and Su, Shiung Lam (2018) Microwave co-pyrolysis of waste polyolefins and waste cooking oil: Influence of N2 atmosphere versus vacuum environment. Energy Conversion and Management, 171. pp. 1292-1301. ISSN 0196-8904

Wan Hanna Melini, Wan Mohtar and Haitham, Afana and Ahmed, El-Shafie and Hin, Charles Joo Bong and Aminuddin, Ab Ghani (2018) Influence of bed deposit in the prediction of incipient sediment motion in sewers using artificial neural networks. Urban Water Journal, 15 (4). pp. 1-7. ISSN 1573062X

Winnie, anak Renang and Nur Amalina Shairah, Abdul Samat and Rubiyah, Baini and Md Rezaur, Rahman and Onni Suhaiza, Selaman (2018) The Effectiveness of a fabricated Bio-Filtration System in Treating the Domestic Greywater. Malaysian Applied Biology Journal, 47 (1). pp. 65-71. ISSN 0126-8643

Wong, E.T.S and Jawad, Z.A. and Chin, B.L.F. and Wee, S.K. (2018) A kinetic study of CO2 sorption improvement in the CA-CNTs mixed matrix membrane. IOP Conference Series: Materials Science and Engineering, 458 (1). ISSN 1757-8981

Wong, Lee Kwang (2018) The Efficient Wind Turbines Design for Low Wind Speed Air. Masters thesis, Universiti Malaysia Sarawak.

Y

Yang, Gao and Abadi, Chanik (2018) Feedback slew algorithms for prolate spinners using Single–Thruster. Acta Astronautica, 144. pp. 39-51. ISSN 0094-5765

Yanuar, Z. Arief and Nor Asiah, Muhamad and Mohd Hafiez, Izzwan Saad and Syazwan, Nazri and Siti Nur Anina, Othman and Mohd Fikri Hilmi, Mohd Taib (2018) High Voltage Stress Distribution Phenomena on Liquid and Solid Insulation Material Using Finite Element Method. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-12). pp. 113-117. ISSN 2289-8131 (online)

Yau, Darrien Seng Mah (2018) Green walls could buffer flash flooding in cities. Asia Research News. pp. 62-63.

Yau, Darrien Seng Mah and Md Abdul, Mannan and Wan Hashim, Wan Ibrahim (2018) Pilot Study of StormPav Green Pavement System. International Journal of Research in Engineering & Advanced Technology, 6 (5). pp. 29-35. ISSN 2320-8791

Yiin, Chung Loong (2018) REPRODUCIBILITY OF NATURAL RESOURCES FOR THE SYNTHESIS OF LOW TRANSITION TEMPERATURE MIXTURES (LTTMS). In: Impacts and Challenges in Oil Palm Production and Downstream Applications. Nova Science Publishers, New York, United States, pp. 1-16. ISBN 1536138797, 9781536138795

Yiin, Chung Loong and Quitain, Armando T. and Suzana, Yusup and Uemura, Yoshimitsu and Sasaki, Mitsuru and Kida, Tetsuya (2018) Sustainable green pretreatment approach to biomass-to-energy conversionusing natural hydro-low-transition-temperature mixtures. Bioresource Technology, 261. pp. 361-369.

Yiin, Chung Loong and Suzana, Yusup and Armando T., Quitain and Yoshimitsu, Uemura and Mitsuru, Sasaki and Tetsuya, Kida (2018) Life cycle assessment of oil palm empty fruit bunch delignification using natural malic acid‑based low‑transition‑temperature mixtures: a gate‑to‑gate case study. Clean Technologies and Environmental Policy, 20. pp. 1917-1928.

Yiin, Chung Loong and Suzana, Yusup and Armando T., Quitain and Yoshimitsu, Uemura and Mitsuru, Sasaki and Tetsuya, Kida (2018) Life cycle assessment of oil palm empty fruit bunch delignification using natural malic acid‑based low‑transition‑temperature mixtures: a gate‑to‑gate case study. Clean Technologies and Environmental Policy, 20. pp. 1917-1928.

Yiin, Chung Loong and Suzana, Yusup and Armando T., Quitain and Yoshimitsu, Uemura and Mitsuru, Sasaki and Tetsuya, Kida (2018) Thermogravimetric analysis and kinetic modeling of low-transition-temperature mixtures pretreated oil palm empty fruit bunch for possiblemaximum yield of pyrolysis oil. Bioresource Technology, 255. pp. 189-197.

Yiin, Chung Loong and Suzana, Yusup and Quitain, Armando T. and Uemura, Yoshimitsu and Sasaki, Mitsuru and Kida, Tetsuya (2018) Delignification kinetics of empty fruit bunch (EFB): a sustainable and green pretreatment approach using malic acid‑based solvents. Clean Techn Environ Policy, 20. pp. 1987-2000.

Yip, Chee Yang (2018) Microwave-Assisted Pyrolysis Of Biomass For Bio-Oil And Bio Char Production. [Final Year Project Report] (Unpublished)

Yong, L.K. and Law, P.L and Taib, S.N.L. and Mah, D.Y.S. and Johari, A.H. (2018) Refinement of Topographical Factor For Estimating Soil Loss and Sediment Yield in Equatorial Regions. Journal of Civil Engineering, Science and Technology, 9 (2). pp. 96-116. ISSN 2462-1382

Yong, Leong Kong (2018) The Development of Equatorial Soil Loss and Sediment Yield Equations. Masters thesis, Universiti Malaysia Sarawak.

Yussuf, N. M. and Embong, Z. and Abdullah, Siti Radziah and Masirin, M. I.M. and Tajudin, Saiful Azhar Ahmad and Ahmad, Salawati A. and Siti Kudnie, Sahari and Anuar, A. A. and Omeje, Maxwell (2018) The enhancement of heavy metal removal from polluted river water treatment by integrated carbon-aluminium electrodes using electrochemical method. IOP Conference Series: Materials Science and Engineering, 298 (1). ISSN 17578981

Yusuf, D.S.A.A. and Sapawi, R. and Masra, S.M.W. and Sahari, S.K. and Sawawi, M. and Mat, D.A.A. and Marzuki, A.S.W and Zamhari, N. (2018) Design of CMOS Power Amplifier with Resistive Feedback and Notch Filter for UWB Systems. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-12). pp. 93-97. ISSN 2289-8131 (online)

Z

ZONG, LAU YING (2018) STRUCTURAL PERFORMANCE OF GROUTING USING POLYMER CONCRETE. [Final Year Project Report] (Unpublished)

Zaidel, D.N.K.A. and Attan, M.P. and Sharip, M.R.M. and Mat, D.A.A. and Marzuki, A.S.W and Semangin, N. and Then, Y.L. (2018) Improvement of the Bandwidth and Scattering Parameter Performances of 5G Branch-Line Coupler Design for the Use in Intelligent Transportation System (ITS). Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-12). pp. 61-64. ISSN 2289-8131 (online)

Zaidel, D.N.K.A. and Bakar, A.F.A. and Sharip, M.R.M. and Mat, D.A.A. and Marzuki, A.S.W and Zaidel, D.N.A. (2018) Design and Analysis of Slotted Ring Wideband Bandpass Filter for Microwave Sensor. Journal of Telecommunication, Electronic and Computer Engineering, 10 (1-12). pp. 51-54. ISSN 2289-8131