Items where Division is "Academic Faculties, Institutes and Centres > Faculty of Engineering
Faculties, Institutes, Centres > Faculty of Engineering" and Year is 2019

Group by: Creators | Item Type | No Grouping

Number of items: 270.

Article

Abdul Rahman, K. and Julai, N. and Rashidi, C.B.M. and Zamhari, N. and Sahari, S. (2019) Impact of rain weather over free space optic communication transmission. Indonesian Journal of Electrical Engineering and Computer Science, 14 (1). pp. 303-310. ISSN 2502-4752

Abdul Rahman, Kram and Julai, N. and Rashidi, C.B.M. and Nurdiani, Zamhari and Sahar, i S., S. (2019) Impact of rain weather over free space optic communication transmission. Indonesian Journal of Electrical Engineering and Computer Science, 14 (1). pp. 303-310. ISSN 2502-4752

Abdul Rahman, Kram and Norhuzaimin, Julai and Rashidi, C. B. M. and Nurdiani, Zamhari and Siti Kudnie, Sahari and Nur Alia Athirah, Mohtadzar (2019) Impact of rain weather over free space optic communication transmission. Indonesian Journal of Electrical Engineering and Computer Science, 14 (1). pp. 303-310. ISSN 2502-4752

Abdul Rahman, Kram and Nur Alia Athirah, Mohtadzar and Buswig, Yonis.M.Yonis and Nurdiani, Zamhari and Mohd Ridhuan, Mohd Sharip and Siti Kudnie, Sahari (2019) Investigation to Reduce Flux Variance Effects Using Partial Coherent Beam in Free Space Optical Communication. IOP Conference Series Materials Science and Engineering, 767 (012036). pp. 1-8. ISSN 1757-899X

Abdul Rahman, Kram and Rashidi, C. B. M. and Aljunid, S. A. and Khairul Fikri, Tamrin and Rudiyanto, P. Jong and Dyg Norkhairunnisa, Abang Zaidel (2019) Spectral coding performance under free space optical medium. Indonesian Journal of Electrical Engineering and Computer Science, 14 (1). pp. 290-294. ISSN 2502-4752

Abdullah, Yassin and Abang Mohammad Nizam, Abang Kamaruddin and Syed Tarmizi, Syed Shazali and M. Shahidul, Islam and Mohd Azrin, Mohd Said and Mohd A., Kiprawi (2019) Development of a cutting edge temperature measurement of end mill tool by using infrared radiation technique. Journal of Mechanical Engineering and Sciences, 3 (1). pp. 4661-4678. ISSN 2231-8380

Abdullah, A.H. and Lee, Yee Yong and Aminudin, E. and Lee, Y.H. (2019) Indoor Air Quality Assessment For A Multistorey University Office Building In Malaysia. Journal of Green Building, 14 (4). pp. 93-109. ISSN 1943-4618 (online)

Adamu, Muhammad and Md. Rezaur, Rahman and Sinin, Hamdan and Khairuddin, Sanaullah (2019) Recent developments in bamboo fiber‑based composites: a review. Polymer Bulletin, 76 (5). pp. 2655-2682. ISSN 1436-2449

Adeniyi, Adedayo Sherif and Amir Azam, Khan and Bilal, Anjum Ahmed and Abbas, Saeed Hakeem and Faheemuddin, Patel and Akolad, Idris Bakare and Anwar, Ul-Hamid and Muhammad Ali, Ehsan and Tahir, Irfan Khan (2019) The Property Characterization of α-Sialon/Ni Composites Synthesized by Spark Plasma Sintering. Nanomaterials, 9 (12). pp. 1-12. ISSN 2079-4991

Ahmad Afip, I. and Siti Noor Linda, Taib and Jusoff, K. and Afip, L.A. (2019) Measurement of Peat Soil Shear Strength Using Wenner Four-Point Probes and Vane Shear Strength Methods. International Journal of Geophysics, 2019. pp. 1-12. ISSN 1687-885X

Ahmed Mohamed, Ahmed Haidar and Heng, Wei Hau (2019) A Framework for Placement Assessment of Synchrophasor Measurement in Practical Power Grid : A Case Study from Borneo. Journal of Electrical and Electronics Engineering, 12 (2). pp. 11-16. ISSN 2329-1613

Ahmed Mohamed, Ahmed Haidar and Mohd R., Mohd Sharip and Jimel, Aaron C. (2019) Optimum Configuration of Solar PV Topologies for DC Microgrid Connected to the Longhouse Communities in Sarawak, Malaysia. International Journal of Photoenergy, 2019. pp. 1-13. ISSN 1687-529X

Akeem, Gbenga Amuda and Alsidqi, Hasan and Fauzan, Sahdi and Siti Noor Linda, Taib (2019) A laboratory miniature full-flow penetrometer system for peat. International Journal of Physical Modelling in Geotechnics. pp. 1-16. ISSN 2042-6550

Akeem, Gbenga Amuda and Alsidqi, Hassan and Dayang Norfaranina, Datu Unoi and Siti Noor Linda, Binti Taib (2019) Strength And Compressibility Characteristics Of Amorphous Tropical Peat. Journal of GeoEngineering, 14 (2). pp. 85-96. ISSN 1990-8326

Akeem, Gbenga Amuda and Fauzan, Sahdi and Alsidqi, Hasan and Siti Noor Linda, Taib and Noel, Boylan and Aliaa, Mohamad (2019) Measurement of Amorphous Peat Shear Strength in the Direct Shear Box at High Displacement Rates. Geotechnical and Geological Engineering, 37 (2). pp. 1059-1072. ISSN 1573-1529

Ana Sakura, Zainal Abidin and Sawing, T. B. and Mohamaddan, Shahrol and Abdul Halim, Hazmi Hijazi and Annisa, Jamali and Muslimen, Rasli and Ashari, Muhd Fadzli and Jamaludin, Mohd Syahmi (2019) Energy harvesting from rotating motion of in-pipe robot cleaning device. International Journal of Automotive and Mechanical Engineering, 16 (1). pp. 6427-6436. ISSN 2229-8649

Andrew Ragai Henry, Anak Rigit and Sanaullah, Khairuddin and A., Khan and Javid, W. and Mushtaq, M. U. (2019) Feasibility of Non-thermal Plasma Assisted Semiconductor Material Synthesis for Thermoelectric, Photovoltaic and Energy Applications. International Journal of Materials, Mechanics and Manufacturing, 7 (1). pp. 7-11. ISSN 1793-8198

Annisa, Jamali and Shahrol, Mohamaddan and Mohammed Najeh, Nemah and Cheng, Yee Low and Kareem, A. K. and Fakhri, O. M. (2019) A Hybrid Haptic Feedback Stimulation Prosthetic Device to Recover the Missing Sensation of Upper Extremity Amputees. TEST Engineering & Management, 81 (NovDis). pp. 649-665. ISSN 0193-4120

Atta Idrawani, Zaini and Dona Rose, Koesmeri and Raja Nur Syaheeza, Raja Mohd Yazit (2019) Taxonomizing Building Forms and Characteristics for Urban Scale Virtual Reality 3D Models. International Journal of Engineering & Technology, 8 (1.9). pp. 551-554. ISSN 2227-524X

Bambang, Karsono and Yenny, Novianti and Nurhaiza, Soraya and Masthura, Hassan (2019) Place Attachment in Public Space Case Study: Hiraq Square Lhokseumawe, Aceh Indonesia. International Journal of Engineering & Technology, 8 (1.9). pp. 626-629. ISSN 2227-524X

Bong, C.H.J and Liow, C.V. (2019) Hydraulic characteristics of flow through angled baffle-plates in an open channel. International Journal of River Basin Management, 2019. ISSN 1571-5124

Bong, Charles Hin Joo and Richard, J. (2019) Drought and climate change assessment using Standardized Precipitation Index (SPI) for Sarawak River Basin. Journal of Water and Climate Change. pp. 1-10. ISSN 2040-2244

Buswig, Yonis.M.Yonis and Al-Khalid, Bin Hj Othman and Norhuzaimin, Bin Julai (2019) Active Cell Balancing Control Method for Series-Connected Lithium-Ion Battery. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (9). pp. 2424-2430. ISSN 2278-3075

Buswig, Yonis.M.Yonis and Al-Khalid, Bin Hj Othman and Norhuzaimin, Bin Julai (2019) Development and Modelling of Three Phase Inverter for Harmonic Improvement using Sinusoidal Pulse Width Modulation (SPWM) Control Technique. Development and Modelling of Three Phase Inverter for Harmonic Improvement using Sinusoidal Pulse Width Modulation (SPWM) Control Technique, 8 (4). pp. 1897-1902. ISSN 2277-3878

Buswig, Yonis.M.Yonis and Hani, Albalawi and Sherif, A. Zaid (2019) Simulation Study of Two Torque Optimization Methods for Direct Torque‐Controlled Induction Motors. Applied Sciences, 9 (24). pp. 1-13. ISSN 2076-3417

Buswig, Yonis.M.Yonis and Norain, Binti Sahari and Faridah Hanim, Binti Mohd Noh and Sim, Syi Li and Nur Najiha, Binti Jembari and Wahyu, Mulyo Utomo and Nooradzianie, Muhammad Zin and Nor Aira, Zambri and Farahiyah, Mustafa and Lam, Hong Yin (2019) IoT Based Three Phase Fault Analysis for Temporary and Permanent Fault Detection. Journal of Electrical Power and Electronics Systems, 1 (2). pp. 1-6. ISSN 2672-734X

Buswig, Yonis.M.Yonis and Utomo, W.M and Isa, N. A. A. and Bakar, A.A. and Gani, A. F. H. A and Prasetyo, B. E. and Elmunsyah, H. (2019) Voltage tracking of bridgeless PFC cuk converter using PI controller. International Journal of Power Electronics and Drive Systems (IJPEDS), 10 (3). pp. 51-58. ISSN 2088-8694

Ching, Vern Liow and Mah, D.Y.S. and Malek, M.A. (2019) Flow Characteristics of StormPav Green Pavement System. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (8). ISSN 2278-3075

Ching, Vern Liow and Yau, Darrien Seng Mah and Marlinda, Abdul Malek (2019) Modelling of StormPav Green Pavement System Using Storm Water Management Model and SolidWorks Flow Simulation. International Journal of Recent Technology and Engineering (IJRTE), 8 (2). pp. 4673-4679. ISSN 2277-3878

Ching, Vern Liow and Yau, Darrien Seng Mah and Mohd Remy Rozainy, bin Mohd Arif Zainol (2019) Modelling of StormPav Green Pavement System with Storm Water Management Model and InfoWorks Collection System. International Journal of Recent Technology and Engineering (IJRTE), 8 (2). pp. 1449-1452. ISSN 2277-3878

Ching, Vern Liow and Yau, Darrien Seng Mah and Mohd Remy Rozainy, bin Mohd Arif Zainol (2019) Modelling of Stormpav Green Pavement: Inlet and Outlet of Integrated Permeable Road and Stormwater Detention System. International Journal of Civil Engineering and Technology (IJCIET), 10 (2). pp. 966-976. ISSN 0976-6316 (online)

Chyntia Jaby, Entuni and Tengku Mohd Afendi, Zulcaffle (2019) Simple Screening Method of Maize Disease using Machine Learning. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 9 (1). pp. 464-467. ISSN 2278-3075

David Chua, S.N. and Chan, B.K. and Lim, S.F. (2019) Experimental and simulation study of thermal accumulation in an enclosed vehicle. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 233 (14). p. 3621. ISSN 0954-4070

Dayang Nur Salmi Dharmiza, Awang Salleh and Seignez, Emmanuel (2019) Longitudinal error improvement by visual odometry trajectory trail and road segment matching. IET Intelligent Transport Systems, 13 (2). pp. 313-322. ISSN 751-956X

E. E., Putri and F. J. H., Rewani and Mohammad Abdul, Mannan and Wan Hashim, Bin Wan Ibrahim and Mohamad Raduan, Hj. Kabit and Larry, Anak Silas Tirau and Ron Aldrino, Chan@Ron Buking (2019) Sensitivity analysis of stormpav composite pavement. IOP Conference Series: Materials Science and Engineering, 602. pp. 1-12. ISSN 1757-899X

Ervina, J., and Ghaleb, Z.A., and Hamdan, S., and Mariatti, M. (2019) Colloidal stability of water-based carbon nanotube suspensions in electrophoretic deposition process: Effect of applied voltage and deposition time. Composites Part A: Applied Science and Manufacturing, 117. pp. 1-10. ISSN 1359-835X

Eugene, J. J. and M. Shahidul, Islam and Mamunur, R. (2019) Optimizing organic materials reduction from hazardous industrial bio-effluent by the aid of c/n enriched inoculum : an approach to use traditional anaerobic reactor to achieve environmental sustainability. Science International (Lahore), 31 (4). pp. 649-654. ISSN 1013-5316

Faisal, Amsyar and Ma, Chau Khun and Wahid, Omar and Abdullah Zawawi, Awang and Shek, Poi Ngian (2019) Behaviour of lightweight foamed concrete with pre-tensioning steel straps confinement. IOP Conf. Series: Earth and Environmental Science, 220. pp. 1-11. ISSN 1755-1315

Hadi, Jumaat and Mohd Tarmizi, Ali and Kismet, Hong Ping and Najwa, Mohd Faudzi and Nurfarahin, Miswadi and Hamizan, Yon (2019) A Review of Frequency Selection and Antenna Arrangement System for Microwave Imaging in Early Breast Cancer Detection. Journal of Physics: Conference Series, 1372. pp. 1-6. ISSN 1742-6596

Haidar, A.M.A. and Julai, N. (2019) An improved scheme for enhancing the ride-through capability of grid-connected photovoltaic systems towards meeting the recent grid codes requirements. Energy for Sustainable Development, 50. pp. 38-49. ISSN 0973-0826

Hushairi, Zen and Jamaah, Suut and Al-Khalid, Bin Hj Othman and Khairuddin, Bin Ab Hamid (2019) Variable Global Optimization min-sum (VGOMS) algorithm of decodeand-forward protocol for the relay node in the cooperative channel. Wireless Networks. pp. 1-11. ISSN 1572-8196

Hyuga, Kikuchi and Mohd Danial, Bin Ibrahim and Masayuki, Ochiai (2019) Evaluation of Lubrication Performance of Foil Bearings with New Texturing. Tribology Online, 14 (5). pp. 339-344. ISSN 1881-2198

Inyang, John and Magdalene, anak Andrew Munot and Syed Tarmizi, Bin Syed Shazali and Shirley, Anak Jonathan Tanjong (2019) A Model to Manage Crude Palm Oil Production System. MATEC Web of Conferences, 255 (02001). pp. 1-7. ISSN 2261-236X

Irfan, Ahmad Afip and Siti Noor Linda, Taib and Kamaruzaman, Jusoff and Liyana, Ahmad Afip (2019) Measurement of Peat Soil Shear Strength Using Wenner Four-Point Probes and Vane Shear Strength Methods. International Journal of Geophysics, 2019. ISSN 1687-8868

J, Matarul and M A, Mannan and N, Yussop and M Z, Endut and A, Ibrahim (2019) Optimising concrete enhancement of local ready-mix concrete partially replaced with local fly-Ash. Journal of Physics: Conference Series.

Jamil, Matarul and Chiew, Fei Ha and Md. Abdul, Mannan and Azmi, Ibrahim and Ezze Elma, Mohd. Yusof (2019) Relationship between Compressive strength and Ultra-Sonic Pulse Velocity (UPV) of Local Fly Ash Concrete. Journal of Engineering and Applied Sciences, 14 (3). pp. 6085-6088. ISSN 1816-949X

Jong, L.Y. and Teo, DCL and Mannan, Mohammad Abdul and Teo, Delsye Ching Lee (2019) Characteristics of Artificial Lightweight Aggregates Produced from Palm Oil Fuel Ash and Fly Ash Using Cold-Bonding. International Journal of Research in Engineering & Advanced Technology, 7 (4). pp. 8-12. ISSN 2320-8791

Kai, Chen Goh and Kamalludin, Bin Bilal and Hui, Hwang Goh and Sulzakimin, Mohamed and Chang, Saar Chai and Gui, Hun Chuen (2019) Cloud Computing Awareness in Malaysia Construction industry. International Journal of Recent Technology and Engineering, 8 (3S). pp. 71-76. ISSN 2277-3878

Kasumawati, Lias and Nabilah, Abdul Jaffar and Norlida, Buniyamin and Hazrul, Mohamad Basri and Wan Azlan, Bin Wan Zainal Abidin and Kuryati, Kipli and Nur Alia Athirah, Binti Hj Mohtadzar (2019) Simulation Study of a Modified Rectangular Microstrip for the Hyperthermia Breast Cancer Procedure with SEMCAD X Solver. Journal of Physics: Conference Series, 2019, 1372. ISSN -

Kennedy, Jadum and Kuan, Nicholas Hoo Tien and Mahshuri, Yusof and Sim, Nee Ting and Chee, Khoon Ng (2019) Mechanical Properties of Betel Nut Husk Fibre Reinforced Oxo-HDPE Composite. Journal of Applied Science & Process Engineering, 6 (2). pp. 378-385. ISSN 2289-7771

Khairul Fikri, Bin Tamrin and Rahmatullah, B. (2019) Classification of synthetic platelets in digital holographic microscopy by neural network. Borneo International Journal, 1 (3). pp. 19-34. ISSN 2636-9826

Khairul Fikri, Tamrin and Moghadasi, K. (2019) Experimental Investigation and Parameter Optimization of Low Power CO2 Laser Cutting of a Carbon/Kevlar Fibre-reinforced Hybrid Composite. Lasers in Engineering. pp. 1-24. ISSN 0898-1507

Khairul Fikri, Tamrin and Mohammad Bodrul, Munir and Hawa, Ringkai (2019) Towards Three-Dimensional Experimental Investigation on Fish Sperm Mobility in Oily Water By Digital Holographic Microscopy for Environmental Protection. Biodiversity and Environmental Conservation, 15 (2). p. 21. ISSN 1675-5820

Khaled M., Amtered El-Abidi and George, Ofori and Sharifah Akmam, Syed Zakaria and Mohammad Abdul, Mannan and Noor Faisal, Abas (2019) Identifying and Evaluating Critical Success Factors for Industrialized Building Systems Implementation: Malaysia Study. Arabian Journal for Science and Engineering, 44. pp. 8761-8777. ISSN 2191-4281

Khan, Afrasyab and Mohd Sobri, Takriff and Masli Irwan, Rosli and Nur Tantiyani, Ali Othman and Khairuddin, Sanaullah and Andrew Ragai, Henry Rigit and Ajmal, Shah and Atta, Ullah and Muhammad Umar, Mushtaq (2019) Turbulence dissipation & its induced entrainment in subsonic swirling steam injected in cocurrent flowing water. International Journal of Heat and Mass Transfer, 145. ISSN 0017-9310

Kinidi, Lennevey and Shanti Faridah, Salleh and Noraziah, Abdul Wahab and Khairul Fikri, Tamrin and Hipolito, Cirilo Nolasco and Ivy Tan, Ai Wei (2019) Corrigendum to “Recent Development in Ammonia Stripping Process for Industrial Wastewater Treatment”. INTERNATIONAL JOURNAL OF CHEMICAL ENGINEERING. p. 1. ISSN 1687-806X

Kueh, A.B.H. and Kho, V.T. (2019) Strut waviness and load orientation affected fracture toughness knockdown in biaxially woven square lattices. International Journal of Mechanical Sciences, 164. ISSN 0020-7403

Kuryati, Kipli and Mohammed Enamul, Hoque and Lim, Lik Thai and Hamdi, M.M. (2019) Feature Extraction Algorithms of Retinal Microvasculature for Cost-Effective Medical Device. Sustainable Community Transformation, 15 (1). pp. 5-6. ISSN 1675-5820

M. Shahidul, Islam and Malcolm, M. L. and Eugene, J. J. and Sharafatul, M.I (2019) A Novel Study On Biogas Production From Palm Oil Mill Effluent With Two-Stage Anaerobic Digester And Nano Membrane. Science International (Lahore), 31 (6). pp. 811-819. ISSN 1013-5316

Mah, D.Y.S. and Ching, Vern Liow and Md Abdul, Mannan (2019) Application of StormPav Green Pavement System in a Government Buildings Redevelopment Scheme. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (9). pp. 723-727. ISSN 2278-3075

Mah, D.Y.S. and Malek, M.A. and Putuhena, Frederik Josep (2019) Digitizing Hydrological Patterns For River Traffic Safety. International Journal of Civil Engineering & Technology, 10 (6). pp. 263-271. ISSN 0976-6316 (Online)

Mah, Yau Seng and Wan Hashim, Wan Ibrahim and Lo, May Chiun and Ha, Shiaw-Tong (2019) Factors Affecting Satisfaction and Loyalty in Public Transport using Partial Least Squares Structural Equation Modeling (PLS-SEM). International Journal of Innovative Technology and Exploring Engineering, 8 (12). pp. 569-575. ISSN 2278-3075

Marina, Patrick and Mah, D.Y.S. and Putuhena, Frederik Josep and Yin, Chai Wang and Onni Suhaiza, Selaman (2019) Constructing depth-area-duration curves using public domain satellite-based precipitation data. International Journal of Hydrology Science and Technology, 9 (3). pp. 281-302. ISSN 2042-7808 (Print)

Md Rezaur, Rahman and Sinin, Bin Hamdan and Jayamani, Elammaran and Kakar, Akshay and Muhammad Khusairy, Bin Bakri and Fahmi Asyadi, Bin Md Yusof (2019) Tert‑butyl catechol/alkaline‑treated kenaf/jute polyethylene hybrid composites: impact on physico‑mechanical, thermal and morphological properties. Polymer Bulletin, 76 (2). pp. 763-784. ISSN 1436-2449

Md Rezaur, Rahman and Sinin, Hamdan and Zainab, Ngaini and Elammaran, Jayamani and Akshay, Kakar and Muhammad Khusairy, Bin Bakri and Fahmi Asyadi, Bin Md Yusof (2019) Cellulose fiber‑reinforced thermosetting composites: impact of cyanoethyl modification on mechanical, thermal and morphological properties. Polymer Bulletin, 76 (8). pp. 4295-4311. ISSN 0170-0839

Mohamad Iskandar, Jobli and Runming, Yao and Zhiwen, Luo and Shahrestani, Mehdi and Nan, Li and Hong, Liu (2019) Numerical and experimental studies of a Capillary-Tube embedded PCM component for improving indoor thermal environment. Applied Thermal Engineering, 148. pp. 466-477. ISSN 1359-4311

Mohamad Iskandar, Jobli and Yao, Runming and Luo, Zhiwen and Shahrestani, Mehdi and Li, Nan and Liu, Hong (2019) Numerical and experimental studies of a Capillary-Tube embedded PCM component for improving indoor thermal environment. Applied Thermal Engineering, 148. pp. 466-477. ISSN 1359-4311

Mohamad Raduan, Bin Kabit and Lee, Melissa May Syn and Norehan, Zulkiply and Zayn, Al-Abideen Gregory (2019) Modelling Driver Injury Severity at Signalized Intersections in Malaysia. Journal of Mechanics of Continua and Mathematical Sciences (4). pp. 288-299. ISSN 0973-8975

Mohamad Raduan, Hj. Kabit and Mohammad, Abdul Mannan and Putri, E.E and Rewani, F J H and Wan Hashim, Wan Ibrahim and Larry, Silas Tirau and Ron Aldrino, Chan@Ron Buking (2019) Sensitivity analysis of stormpav composite pavement. IOP Conference Series : Materials Science and Engineering, 602 (1). pp. 1-12. ISSN 1757-8981

Mohammad, Abdul Mannan and Shyue, Leong Lee and Wan Hashim, Wan Ibrahim (2019) Shear strength evaluation of composite pavement with geotextile as reinforcement at the interface. Geotextiles and Geomembranes. pp. 1-6. ISSN 0266-1144

Mohammad Kamrul, Hasan and Musse, Mohamud Ahmed and Sherfriz Sherry, Musa and Denis, Lee (2019) Calibration of Dynamic Line Rating Model for Phasor Measurement Unit Based Wide Area Measurement System in Smart Grid Application. International Journal of Recent Technology and Engineering (IJRTE), 8 (4). pp. 1879-1883. ISSN 2277-3878

Mohd Danial, Ibrahim and Ger, Lian Tan and Lidyana, Roslan and Kashiwabara, Yuki and Jasmine, Jendia and Sunami, Yuta (2019) Numerical and Experimental Analysis on Runner and Gate Positioning for Magnesium Alloy Die-casted Test Piece. Materials Science Forum, 975. pp. 1-6. ISSN 1662-9752

Mohd Farid, Bin Atan and Mohd Azlan, Bin Hussain and Mohammad Reza, Abbasi and Mohammad Jakir, Hossain Khan and Muhamad Fazly, Bin Abdul Patah (2019) Advances in Mathematical Modeling of Gas-Phase Olefin Polymerization. Processes, 7 (2). p. 67. ISSN 2227-9717

Mohd Syahmi, Jamaludin and Hanafusa, Akihiko and Shinichirou, Yamamoto and Agarie, Yukio and Otsuka, Hiroshi and Ohnishi, Kengo (2019) Development of an Evaluation System for Magnetic Resonance Imaging Based Three-Dimensional Modeling of a Transfemoral Prosthetic Socket Using Finite Elements. Appl. Sci., 9 (18). pp. 1-16. ISSN 2076-3417

Muhammad, Adamu and Md Rezaur, Rahman and Sinin, Hamdan (2019) Formulation optimization and characterization of bamboo/polyvinyl alcohol/clay nanocomposite by response surface methodology. Composites Part B: Engineering, 176. ISSN 1359-8368

Muhammad Khusairy, Bakri and Jayamani, E. and Sinin, Hamdan and Md. Rezaur, Rahman and Kakar, A. (2019) Potential of Borneo Acacia wood in fully biodegradable bio-composites' commercial production and application. POLYMER BULLETIN, 76 (2). p. 1059. ISSN 0170-0839

Mustafa Kamal, M. and Baini, R. and Lim, S. F. and Rahman, M. R and Mohamaddan, S. and Hussain, H. (2019) Drying effect on the properties of traditionally processed sago starch. International Food Research Journal, 26 (6). pp. 1861-1869.

Mustafa Kamal, M. and Baini, R. and Lim, S.F. and Rahman, M.R. and Mohamaddan, S. and Hussain, H. (2019) Drying effect on the properties of traditionally processed sago starch. International Food Research Journal, 26 (6). pp. 1861-1869.

Nabilah, Abdul Jaffar and Norlida, Buniyamin and Kasumawati, Lias (2019) An overview of available metamaterial-based antenna for non-invasive hyperthermia cancer treatment. Indonesian Journal of Electrical Engineering and Computer Science, 14 (2). pp. 697-705. ISSN 25024752

Nabilah, Abdul Jaffar and Norlida, Buniyamin and Kasumawati, Lias (2019) An overview of available metamaterial-based antenna for noninvasive hyperthermia cancer treatment. Indonesian Journal of Electrical Engineering and Computer Science, 14 (2). pp. 697-705. ISSN 2502-4752

Nagaratnam, Brabha H and Muhammad, Abdul Mannan and Muhammad Ekhlasur, Rahman and Abdul Karim, Mirasa and Alan, Richardson and Nabinejad, Omid (2019) Strength and microstructural characteristics of palm oil fuel ash and fly ash as binary and ternary blends in Self-Compacting concrete. Construction and Building Materials, 202. pp. 103-120. ISSN 0950-0618

Nikmatin, S. and Hermawan, B. and Irmansyah, I. and Indro, M.N and Kueh, Ahmad Beng Hong and Syafiuddin, A (2019) Evaluation of the Performance of Helmet Prototypes Fabricated from Acrylonitrile Butadiene Styrene Composites Filled with Natural Resource. MATERIALS, 12 (1). p. 34. ISSN 1996-1944

Norazlina, Bateni and Sai, Hin Lai and Putuhena, F.J. and Yau, Darrien Seng Mah and Md Abdul, Mannan and Ren, Jie Chin (2019) Hydrological Performances on the Modified Permeable Pavement with Precast Hollow Cylinder Micro detention Pond Structure. KSCE Journal of Civil Engineering, 23 (9). pp. 3951-3960. ISSN 1226-7988

Norfamila, Binti Che Mat and Lipscomb, Glenn Glenn (2019) Global sensitivity analysis for hybrid membrane-cryogenic post combustion carbon capture process. International Journal of Greenhouse Gas Control, 81. pp. 157-169. ISSN 1750-5836

Nur Fadilah, Darmansah and Sitti Diana, Tamjehi and Abdul Wafi, Razali and Nadia, Zaini and Sharifah NurFarhana, Syed Sahimi (2019) Design concept of horse arena in Malaysia – A case study. IOP Conference Series: Materials Science and Engineering, 527 (1). pp. 1-7. ISSN 1757-899X

Nur Hidayatul Nazirah, Binti Kamarudin and Herma Dina, Setiabudi and Aishah, Binti Abdul Jalil and Siti Hazirah, Binti Adam and Nur Fatien, Binti Muhamad Salleh (2019) Utilization of Lapindo Volcanic Mud for Enhanced Sonosorption Removal of Acid Orange 52. Bulletin of Chemical Reaction Engineering & Catalysis, 14 (1). pp. 189-195. ISSN 1978-2993

Nur Tahirah, Razali and Dominic Sanchez, Merom and Marini, Sawawi and Magdalene, Andrew-Munot and Shahrol, Mohamaddan and Mahshuri, Yusof and Siti Kudnie, Sahari (2019) Effect of Surfactants to The Electrical Properties of The Hole Transporting Layer of Organic Solar Cells. International Journal of Research in Engineering & Advanced Technology, 7 (4). pp. 13-15. ISSN 2320-8791

Praveenna, Nagaratnam and Mannan, B.H., and Rahman, M.A., and Mirasa, M.E., and Richardson, A.K., and Nabinejad O., A., (2019) Strength and microstructural characteristics of palm oil fuel ash and fly ash as binary and ternary blends in Self-Compacting concrete. Construction and Building Materials, 202. pp. 103-120. ISSN 09500618

Rosmina, Ahmad Bustami and Belusko, Martin and Ward, James and Beecham, Simon (2019) Vertical greenery systems: A systematic review of research trends. Building and Environment, 146. pp. 226-237. ISSN 3601323

Rosmina A., Bustami and Chris, Brien and James, Ward and Simon, Beecham and Robyn, Rawlings (2019) A Statistically Rigorous Approach to Experimental Design of Vertical Living Walls for Green Buildings. Urban Science, 3 (71). pp. 1-15. ISSN 2413-8851

Rudiyanto, Philman Jong and Osman, Kahar (2019) Estimation of mitral valve degenerative behavior with mitral regurgitation. Borneo International Journal, 2 (2). pp. 1-15. ISSN 2636-9826

Saleh, A.A. and Reddy, A. N.R. and Nadia, N.A. and Charyulu, K. and Hamdan, S. (2019) Evaluation of ubi gajah for bioethanol via Hydrolysis and fermentation. Malaysian Applied Biology, 48 (5). pp. 59-65. ISSN 0126-8643

Samad, N.A. and Zaidel, D.N.A. and Salleh, E. and Yusof, A.H.M and Dailin, D.J (2019) Optimization of plectranthus amboinicus (Lour.) spreng extraction process using microwave-assisted technique. Chemical Engineering Transactions, 72. pp. 397-402. ISSN 2283-9216

Samad, Nabilah and Zaidel, D.N.A and Salleh, E and Yusof, A.H.M., and Dailin, D.J and Dyg Norkhairunnisa, Abang Zaidel (2019) Optimization of plectranthus amboinicus (Lour.) spreng extraction process using microwave-assisted technique. Chemical Engineering Transactions, 72. pp. 397-402. ISSN 2283-9216

Saravana Kannan, Thangavelu and Rajkumar, T., and Dinesh Kumar, Pandi and Abu Saleh, Ahmed and Farid Nasir, Ani (2019) Microwave assisted acid hydrolysis for bioethanol fuel production from sago pith waste. Waste Management, 86. pp. 80-86. ISSN 0956-053X

Shahidul, Islam (2019) An insight on the greenhouse gas emission from the metals process industries and its effects on climate change. Material Science & Engineering International Journal, 3 (6). pp. 205-208. ISSN 2574-9927

Shahrol, Mohamaddan and Lew, Hao Xian and Mohd Fadzli, Ashari and Marini, Sawawi and Mohamad Syazwan Zafwan, Bin Mohamad Suffian (2019) Conceptual Design of a Sago Drying Machine and Structural Simulation Using Finite Element Analysis. Journal of Sustainability Science and Management, 14 (4). pp. 86-93. ISSN 2672-7226

Shaikuthali, S.A. and Mannan, Mohammad Abdul and Dawood, Eethar Thanon and Teo, DCL and Raudhah, Ahmadi and Idawati, Ismail (2019) Workability and compressive strength properties of normal weight concrete using high dosage of fly ash as cement replacement. Journal of Building Pathology and Rehabilitation, 4 (26). ISSN 2365-3159 (Print)

Shamsiah, Suhaili and Watanabe, Takahiro (2019) High-Throughput of SHA-256 Hash Function with Unfolding Transformation. Global Journal of Engineering and Technology Review, 4 (4). pp. 73-81. ISSN 0128-2905

Shanti Faridah, Salleh and Afrasyab, Khan and Cirilo Nolasco, Hipolito and Lennevey, Kinidi and Dayang Siti Herdawati, Abang Hardin (2019) An Analytical Modeling Approach for Performance Evaluation of Electrostatic Precipitator (ESP). Journal of Energy and Safety Technology, 1 (2-2). 63 -73. ISSN 2637-1030

Shanti Faridah, Salleh and Shareena, Saree and Khairuddin, Sanaullah and Afrasyab, Khan and Robiah, Yunus and Marini, Sawawi and NORDIANA, RAJAEE and Norzafirah Azriah, MOHD FADZLI and Mohammed, Haji Alhaji (2019) MATHEMATICAL MODELLING AND & SIMULATION OF THRESHER OPERATION IN PALM OIL MILL. Journal of Sustainability Science and Management, 14 (5). pp. 43-54. ISSN 1823-8556

Silahuddin, S. M. and Abang Mohamad, Aizuddin and Shahrol, Mohamaddan and Syed Tarmizi, Syed Shazali and Mohamad Syazwan Zafwan, Mohamad Suffian and Adrus, Mohamad Tazuddin and Azfar Satari, Abdullah (2019) Design and development of a modular vibration test rig for combination types of fault in rotating machinery health diagnosis. Journal of Mechanical Engineering and Sciences, 13 (3). pp. 5323-5333. ISSN 2289-4659

Sim, Nee Ting and Chee, Khoon Ng (2019) Quantitative Model for the Systematic Evaluation of Standard Form of Civil Engineering Contract. International Journal of Recent Technology and Engineering (IJRTE), 8 (4). ISSN 2277-3878

Siti Farhanah, SM Johan and Chan, Chee Ming (2019) Consolidation of dredged marine soils with single and doubled drainage. Malaysian Construction Research Journal, 27 (1). pp. 19-26. ISSN 1985-3807

Siti Kudnie, Sahari and Nik Amni Fathi, Nik Zaini Fathi and Azrul Azlan, Hamzah and Norsuzailina, Mohamed Sutan and Zaidi, Embong and Suhana, Muhamed Sultan and Muhammad, Kashif and Marini, Sawawi and Lilik, Hasanah and Rohana, Sapawi and Kuryati, Kipli and Abdul Rahman, Kram and Nazreen, Junaidi (2019) Effects of Post-Deposition Annealing Temperatures on the Composition of Interfacial Layer at Germanium (Ge) /Aluminium Oxide (Al2 O3 ) (Kesan Suhu Penyepuhlindapan Pasca Pemendapan ke atas Komposisi Antara Muka Lapisan Oksida Germanium (Ge)/Aluminium (Al2 O3 )). Sains Malaysiana, 48 (6). pp. 1195-1199. ISSN 0126-6039

Syed Salman, Shafqat and Amir Azam, Khan and Muhammad Nadeem, Zafar and Mohammed Haji, Alhaji and Khairuddin, Sanaullah and Syed Rizwan, Shafqat and Shahzad, Murtaza and Suh, Cem Pang (2019) Development of amino-functionalized silica nanoparticles for efficient and rapid removal of COD from pre-treated palm oil effluent. Journal of Materials Research and Technology, 8 (1). pp. 385-395. ISSN 2238-7854

Tan, Ivy Ai Wei and Jamali, Nur Syakina and Ting, Winnie Huong Tien (2019) Phytoremediation of Palm Oil Mill Effluent (POME) Using Eichhornia crassipes. Journal of Applied Science & Process Engineering, 6 (1). pp. 340-354. ISSN 2289-7771

Tan, Wen-Shan and Mohamed Abdelmoneim, Shaaban Mohamed and Mohd Zainal Abidin, Bin Ab Kadir (2019) Stochastic generation scheduling with variable renewable generation: methods, applications, and future trends. IET Generation, Transmission & Distribution, 13 (9). pp. 1467-1480. ISSN 1751-8687

Tan, Weng Yeow and Then, Yi Lung and Lew, Yao Long and Tay, Fei Siang (2019) Newly calibrated analytical models for soil moisture content and pH value by low-cost YL-69 hygrometer sensor. Measurement, 134. pp. 166-178. ISSN 0263-2241

Tan Y, Y.H and Abdullah, M.O. and Kansedo, J. and Mubarak, N.M. and Chan, Y.S. and Nolasco-Hipolito, C. (2019) Biodiesel production from used cooking oil using green solid catalyst derived from calcined fusion waste chicken and fish bones. Renewable Energy, 139. pp. 696-706. ISSN 9601481

Tengku Mohd Afendi, Zulcaffle and Fatih, Kurugollu and Crookes, Danny and Ahmed, Bouridane and Mohsen, Farid (2019) Frontal View Gait Recognition With Fusion of Depth Features From a Time of Flight Camera. IEEE Transactions on Information Forensics and Security, 14 (4). pp. 1067-1082. ISSN 1556-6013

Tharima, A.F., and Rahman, M.M., and Yusoff, M.Z., and Kueh, A.B.H. (2019) Multi-objective optimization of underground car park design for tenability under fire-induced smoke. Tunnelling and Underground Space Technology, 85. pp. 220-230. ISSN 0886-7798

Wan Azlan, Wan Zainal Abidin and Thelaha, Hj Masri and Lawan, S. M. (2019) Implementation of a topographic artificial neural network wind speed prediction model for assessing onshore wind power potential in Sibu, Sarawak. The Egyptian Journal of Remote Sensing and Space Sciences. pp. 1-14. ISSN 1110-9823

Wee, Kiet Ting and Alsidqi, Hasan and Fauzan, Sahdi and Siti Noor Linda, Taib and Norsuzailina, Mohamed Sutan and Badhrulhisham, Abdul Aziz and Andy, Fourie (2019) A Narrow Wall System to Capture Temperature Stress–Strain Behaviorin Paste Backfill. Geotechnical Testing Journal, 43 (2). pp. 310-324. ISSN 0149-6115

Yanuar Zulardiansyah, Arief and Nur Anisah Aziera, Binti Abdul Halim and Mohd Hafiez Izzwan, Bin Saad (2019) Optimization of Hybrid Renewable Energy in Sarawak Remote Rural Area Using HOMER Software. IEEE Xplore. pp. 1-5. ISSN 978-1-7281-3494-9

Yiin, Chung Loong and Chun, Adrian Minh Loy and Suzana, Binti Yusup and Bing, Shen How and Lai, Bridgid Fui Chin and Mustakimah, Binti Muhammad and Yong, Ling Gwee (2019) Uncertainty estimation approach in catalytic fast pyrolysis of rice husk : Thermal degradation, kinetic and thermodynamic parameters study. Bioresource Technology, 294. pp. 1-7. ISSN 0960-8524

Yiin, Chung Loong and Syhui, Ho and Suzana, Yusup and Quitain, Armando T. and Yi, Herng Chan and Chun, Adrian Minh Loy and Yong, Ling Gwee (2019) Recovery of cellulose fibers from oil palm empty fruit bunch for pulp and paper using green delignification approach. Bioresource Technology, 290. pp. 1-5.

Zahid, L. and Jusoh, M. and Ghazali, N. H. and Sabapathy, T. and Mustapa, M. and Abdul Rahman, Kram (2019) Single-layer performance of sugarcane bagasse-and rubber tire dust microwave absorber in narrow band frequency of 3.85 GHz to 8.2 GHz. Indonesian Journal of Electrical Engineering and Computer Science, 13 (2). pp. 737-743. ISSN 2502-4752

Zi, Sheng Lui and Mah, D.Y.S. and Fang, Yenn Teo (2019) Stormwater detention in road shoulder using stormpav green pavement system. International Journal of Civil Engineering and Technology (IJCIET), 10 (4). pp. 400-409. ISSN 0976-6316

Book

Gaddafi, Ismaili and Rasidah, Abd Wahab and Teo, Delsye Ching Lee and Roslan, Ali, eds. (2019) Asas Kesukarelawanan: Kaedah Pengajaran dan Penilaian. UNIMAS Publiser, Universiti Malaysia Sarawak. ISBN 978-967-2008-69-9

Ir Dr Mohd. Asbi, Othman and Prof. Emeritus Dato’ Dr Hj. Ismail, Hj. Bakar and Dato’ Ir Rohaizi, Mohd Jusoh and Ir Dr Zuhairi, Abd. Hamid and Tuan Zamri, Ramli and Ir Dr Toh, Cheng Teik and Ir Vincent Tang, Chok Khing and Ir Abdul Hadi, Abdul Aziz and Ir Dr Low, Tian Huat and Associate Prof. Ts Dr Adnan, Zainorabidin and Siti Noor Linda, Taib and Norazzlina, M.Sa'don and Ir Dr Vivi, Anggraini and Dr Youventharan, Duraisamy and Mohamed Fadzli, Rahman and Ir Chee, Sai Kim (2019) Guidelines For Construction on Peat and Organic Soils in Malaysia - Second Edition (2). Construction Research Institute of Malaysia (CREAM), CONSTRUCTION RESEARCH INSTITUTE OF MALAYSIA (CREAM), Kuala Lumpur. ISBN 978-967-0242-22-4

Norsuzailina, Mohamed Sutan and Jethro, Anak Henry Adam and Abdul Razak, Abdul Karim and Norazzlina, M.Sa'don and Mah, D.Y.S. (2019) Manual of Open-Ended Laboratory (OEL). UNIMAS Publishe, Universiti Malaysia Sarawak, 94300 Kota Samarahan, Sarawak, Malaysia.. ISBN 978-967-2008-14-9

Universiti Malaysia Sarawak, Faculty of Engineering (2019) Faculty of Engineering : Final year project log book. Universiti Malaysia Sarawak, (UNIMAS). (Unpublished)

Book Chapter

Gaddafi, Ismaili and Rasidah, Abd Wahab and Teo, Delsye Ching Lee and Roslan, Ali (2019) Bab 1: Latar belakang dan Pelaksanaan Kursus Kemahiran Insaniah dan Asas Kesukarelawanan, Universiti Malaysia Sarawak. In: Asas Kesukarelawanan: Kaedah Pengajaran dan Penilaian. UNIMAS Publiser, Universiti Malaysia Sarawak, pp. 1-5. ISBN 978-967-2008-69-9

Gaddafi, Ismaili and Zakiah, Ahmat and Nur Fatihah, Abdullah Bandar (2019) Bab 4: Pembudayaan Kesukarelawanan Dalam Kalangan Pelajar Universiti Awam. In: Asas Kesukarelawanan: Kaedah Pengajaran dan Penilaian. UNIMAS Publisher, Universiti Malaysia Sarawak, pp. 29-35. ISBN 978-967-2008-69-9

Khairul Fikri, Bin Tamrin and Sheikh, N. A. and Sapuan, S. M. (2019) Laser drilling of composite material : A review. In: Hole-Making and Drilling Technology for Composites : Advantages, Limitations and Potential. Woodhead Publishing Series in Composites Science and Engineering . Elsevier Ltd., pp. 89-100. ISBN 978-0-08-102397-6

Md Rezaur, Rahman and Hamdan, Sinin and Siti Noor Linda, Taib and Rubiyah, Baini (2019) Optimization of Fabrication Technique to Prepare Acacia Wood Reinforced Bio-Composites. In: Acacia Wood Bio-composites. Springer International Publishing, pp. 49-102. ISBN 978-030-29627-8

Simon, Beecham and Mostafa, Razzaghmanesh and Rosmina, Bustami and James, Ward (2019) The Role of Green Roofs and Living Walls as WSUD Approaches in a Dry Climate. In: Approaches to Water Sensitive Urban Design: Potential, Design, Ecological Health, Urban Greening, Economics, Policies, and Community Perceptions. Elsevier, Amsterdam, Netherlands; Cambridge MA, pp. 409-430. ISBN 978-012812843-5; 978-012812844-2

Certificate

Boon, David Liang Bong (2019) Certificate of Attendance to The Organizing Committee of the 2019 International Symposium on Intelligent Signal Processing and Communication Systems (lSPACS 2019). [Certificate] (Unpublished)

Mohd Farid, Bin Atan (2019) Certificate of Participant for participating in 26th Regional Symposium on Chemical Engineering RSCE 2019 @ Kuala Lumpur (30th - 31st October 2019). [Certificate]

Final Year Project Report

ADARSH, PHILIP (2019) DEVELOPMENT OF SOLAR POWER SYSTEM FOR SARAWAK PEAT WATER CONTINUOUS ELECTROCOAGULATION PROCESS. [Final Year Project Report] (Unpublished)

AMEALY LIONY, TOM (2019) CLASSIFICATION OF PERCEPTRON ELECTRIC DISCHARGE SIGNAL ON PATTERN RECOGNITION APPROACH. [Final Year Project Report] (Unpublished)

ANDRE ANDING, TEDONG (2019) FABRICATION AND CHARACTERIZATION OF TITANIUM DIOXIDE BASED DYE SENSITIZED SOLAR CELL. [Final Year Project Report] (Unpublished)

ARLIZ, ABDUL SAMAT (2019) EFFECT OF STUB ON THE PERFORMANCE OF 3-DB BRANCH LINE COUPLER FOR LOW-COST VECTOR NETWORK ANALYZER APPLICATION. [Final Year Project Report] (Unpublished)

ASYRAF ARIFFIFUDDIN, DAUD (2019) FABRICATION AND CHARACTERIZATION OF REDUCED GRAPHENE OXIDE BASED ON DSSC. [Final Year Project Report] (Unpublished)

BIANTI SHEANON, LOJITAN (2019) EFFECTS OF AGGREGATE CONCEPTS ON THE WORKABILITY OF PERVIOUS CONCRETE. [Final Year Project Report] (Unpublished)

Bibi Nurul Farah, Khairul Albar (2019) IoT Based Monitoring System for Autism Children. [Final Year Project Report] (Unpublished)

CALVIN, CLIFF (2019) COMPARATIVE STUDY ON PERFORMANCES AND PROPERTIES BETWEEN ORINARY PORTLAND COMENT (OPC) AND PORTLAND LIMESTONE CEMENT (PLC). [Final Year Project Report] (Unpublished)

CATHERINE, ENCHARANG (2019) STUDY AND DESIGN OF AUTOMATED FISH POND MONITORING SYSTEM USING LABVIEW AND DATA ACQUISITION DEVICE. [Final Year Project Report] (Unpublished)

CHARMAINE JOANNA, STEPHEN CORNET (2019) MICROWAVE-ASSISTED PYROLYSIS FOR CONVERSION OF KARANJA SEED TO BIO-OIL. [Final Year Project Report] (Unpublished)

CHE WAN NOR FITTRY ELLINA, CHE WAN MUDA (2019) SMALL SIGNAL STABILITY OF A POWER SYSTEM WITH HIGH PENETRATION OF SOLAR ENERGY. [Final Year Project Report] (Unpublished)

CHEE, KA CHIN (2019) PARAMETRIC STUDY ON INSET FEED SINGLE PATCH ANTENNA WITH DEFECTED GROUND STRUCTURE FOR MICROWAVE IMAGING SYSTEM. [Final Year Project Report] (Unpublished)

CHEN, JIA CHERN (2019) FEASIBILITY STUDY ON THE COMBINATION MIX OF MICROTONOLITE AND LIMESTONE FOR SURGACE WEARING COURSE. [Final Year Project Report] (Unpublished)

CHEW, JOLENE (2019) AN IMPROVED FUZZY FAILURE MODE AND EFFECT ANALYSIS METHODOLOGY WITH GROUP DECISION MAKING. [Final Year Project Report] (Unpublished)

CHONG, KONG CHENG (2019) Site-Specific Ground Responses Analysis at Offshore of Bintulu, Sarawak. [Final Year Project Report] (Unpublished)

Chong, Colin Ka Liang (2019) ELECTRICAL RESISTIVITY FOR HYDRATION OF SEDIMENTED GYPSUM SLURRY. [Final Year Project Report] (Unpublished)

DAYANG NURUL AFIQAH, ABG MOHD TAHIR (2019) SOFT ERROR IN ASYNCHRONOUS CIRCUIT DESIGN. [Final Year Project Report] (Unpublished)

DAYANGKU KHAIRUNESA, AWG. SAKAWI (2019) A STUDY ON THE CONFIGURATIONS OF STANDALONE RENEWABLE ENERGY AS DC MICROGRID SOURCES FOR RURAL AREA. [Final Year Project Report] (Unpublished)

DON PEREZ, LIAP (2019) COMPARISON OF CHILD DETECTION SYSTEM WITH ARTIFICIAL INTELLIGENCE USING MOBILENET, YOLOV2 AND YOLOV3 FOR OBJECT DETECTION. [Final Year Project Report] (Unpublished)

Ervin Rangga, Edwin (2019) Settlement analysis of chemically stabilized peat subgrade in road pavement. [Final Year Project Report] (Unpublished)

FAM, JYE YUN (2019) REAL-TIME REMOTE POWER MONITORING OF SINGLEPHASE SOLAR PV INVERTER. [Final Year Project Report] (Unpublished)

FATRICIA LAUREN, BAHUN (2019) FENG OBE-QMS MOBILE APPS. [Final Year Project Report] (Unpublished)

FELIX FERNANDEZ, BANLEHONG (2019) OBSERVING TOOL WEAR DURING MILLING MILD STEEL IN MINIMUM QUANTITY LUBRICATION (MQL) USING PALM OIL. [Final Year Project Report] (Unpublished)

FINNEGAN TINGGIE DAMPA, INGING (2019) OPTIMIZATION OF BIOGAS PRODUCTION FROM PALM OIL MILL EFFLUENT UNDER THE EFFECT OF SOLID RETENTION TIME, ORGANIC LOADING RATE, AND HYDRAULIC RETENTION TIME. [Final Year Project Report] (Unpublished)

FIRDHAUS, ABDUL GHANI (2019) DESIGN OPTIMIZATION OF AIR INTAKE FILTER SYSTEM FOR CAR’S APPLICATION. [Final Year Project Report] (Unpublished)

FLORISCA, ALDINA GODULUS (2019) DESIGN AND IMPLEMENTATION OF RIPEMD-160 ALGORITHM ON RECONFIGURABLE HARDWARE. [Final Year Project Report] (Unpublished)

Fazlin, Abdul Azidi (2019) Thermal comfort assessment for Universiti Malaysia Sarawak (UNIMAS) community based on different building layouts. [Final Year Project Report] (Unpublished)

GIBSON, CONELLY PHANG (2019) SECOND ALTERNATIVE ENERGY STORAGE. [Final Year Project Report] (Unpublished)

HARLEY, EDWIN@JOHNNY (2019) ESTIMATION HUMAN HEIGHT FROM VIDEO CAMERA. [Final Year Project Report] (Unpublished)

HAWA, RINGKAI (2019) DEVELOPMENT OF AN OFF-AXIS DIGITAL HOLOGRAPHIC MICROSCOPE FOR THREE-DIMENSIONAL (3D) MICROFLUIDICS APPLICATION. [Final Year Project Report] (Unpublished)

Handy Priyo, Nurjuliyanto (2019) Geometrically non-linear time history elastic analysis for the performance based design of a prilling tower. [Final Year Project Report] (Unpublished)

IZZAH SYAFIQAH, REDZUAN (2019) ASSESSMENT OF THE AFFORDABLE AND SUSTAINABLE ENERGY STORAGE SYSTEMS IN THE RURAL AREAS OF SARAWAK. [Final Year Project Report] (Unpublished)

IZZUL FITRIE, KHALID (2019) SMART MONITORING AND CONTROL SYSTEM FOR HOUSEHOLD APPLIANCES. [Final Year Project Report] (Unpublished)

JASMINE, JENDIA (2019) OUTWARD CURVATURE RUNNER WITH AIR VENTS FOR DIE CASTED TEST PIECE BASED ON MANUFACTURABLE MOLD DESIGN. [Final Year Project Report] (Unpublished)

KELVIN JUING, TINGGOM (2019) SIMULATION OF DEFECTS ON MEDIUM VOLTAFE CROSSLINKED POLYETHYLENE (XLPE) CABLE INSULATION USING FINITE ELEMENT ANALYSIS. [Final Year Project Report] (Unpublished)

Kelvin Sim Kai, Tung (2019) Feasibility study on the combination of limestone and gravel for the use in surface wearing course. [Final Year Project Report] (Unpublished)

LING, TIEW CHEON (2019) DEVELOPMENT OF INTENTION DRIVEN REHABILITATION AND ASSISTIVE HAND EXOSKELETON CONTROL SYSTEM. [Final Year Project Report] (Unpublished)

LIU, WEN YEE (2019) DESIGN AND IMPLEMENTATION OF SMART HOME CONTROL SYSTEM BASED ON INTERNET OF THINGS. [Final Year Project Report] (Unpublished)

Low Ying, Yao (2019) Mobile queuing solution. [Final Year Project Report] (Unpublished)

Lui Zi, Sheng (2019) 3D modelling of stormpav green pavement at road shoulder. [Final Year Project Report] (Unpublished)

MACQUINE BALING, DAVID DARI (2019) MOBILE APPS MONITORING SYSTEM FOR MADU KELULUT AGRICULTURAL. [Final Year Project Report] (Unpublished)

MAMUNUR, RASHID (2019) Biogas Production from Palm Oil Mill Effluent (POME) by Optimum Level of Inputs. [Final Year Project Report] (Unpublished)

MELVIN LUAT, AUGUSTINE LUBON (2019) Correlation Study of Relationship Between Hardness and Microstructure in Mechanical Properties of Heat Treatable Aluminium Alloys. [Final Year Project Report] (Unpublished)

MIZA, BELIA (2019) SIMULATION AND ANALYSIS OF HARMONIC DETECTION AND MITIGATION SYSTEM USING ACTIVE FILTER. [Final Year Project Report] (Unpublished)

MOHAMAD BADROOL SYAHRIL, HOSSEN (2019) SUPPRESSING MULTIPLE USER INTERFERENCE (MUI) USING ZERO CROSS-CORRELATION IN OCDMA. [Final Year Project Report] (Unpublished)

MOHAMAD HISYAM, SUFFIAN (2019) EVALUATION OF BIOETHANOL FROM WASTE PINEAPPLE AS ADDITIVE WITH DIESL BLEND FUEL FOR DIESEL ENGINE. [Final Year Project Report] (Unpublished)

MOHAMAD NIZAM, TRUNA (2019) MICROSTRIP ANTENNA WITH DEFECTED GROUND PLANE FOR MICROWAVE BREAST IMAGING SYSTEM AT 2.45GHz. [Final Year Project Report] (Unpublished)

MUHAMMAD ‘IZZAT, ISHAK (2019) SEISMIC PERFORMANCE OF SHEAR WALL WITH DIFFERENT THICKNESS AND WIDTH FOR LOW RISE BUILDING. [Final Year Project Report] (Unpublished)

Madelin, Demong (2019) Synthesis of Sago Hampas Activated Carbon Aerogel (SHACA) for sago wastewater (SWW) treatment. [Final Year Project Report] (Unpublished)

Maureen, Tambi (2019) Pack Carburizing Study Of Low(Mild) Carbon Steel Through Activated Carbon. [Final Year Project Report] (Unpublished)

Md. Fazlul, Hasan (2019) Dualband microstrip antenna (2.4GHz & 5.8 GHz) with novel back transmission line feed technique. [Final Year Project Report] (Unpublished)

NABILA, SHARIFUDDIN (2019) DESIGN AND IMPLEMENTATION OF SMART PARKING USING ARDUINO BASED ON INTERNET OF THING (IOT). [Final Year Project Report] (Unpublished)

NUR AKMAL, JAMAL (2019) INVESTIGATION OF WIRELESS POWER TRANSFER BY USING VISIBLE LIGHT. [Final Year Project Report] (Unpublished)

NUR ANISAH AZIERA, ABDUL HALIM (2019) OPTIMIZATION OF HYBRID RENEWABLE ENERGY IN SARAWAK REMOTE RURAL AREA USING HOMER SOFTWARE. [Final Year Project Report] (Unpublished)

NUR ARDILLA, SHAZALI (2019) DEVELOPMENT OF PROTOYPE WEB-BASED EDUCATIONAL SYSTEM ON LOW VOLUME RURAL ROAD DESIGN. [Final Year Project Report] (Unpublished)

NUR ASHIQIN, MAT HABEHA (2019) DESIGN OF SMART AGRICULTURE SENSOR BASED ON THE INTERNET OF THINGS (IOT). [Final Year Project Report] (Unpublished)

NUR ATIKAH, ABDUL RAZAK (2019) THE EFFECT OF DEFLECTOR DISTANCE ON EXTRA LOW PRESSURE FIRE SPRINKLER NOZZLE PERFORMANCE. [Final Year Project Report] (Unpublished)

NUR FAEZAH, ABUSAMAH (2019) SMART ELECTRICAL ENERGY MONITORING SYSTEM (SEEMS). [Final Year Project Report] (Unpublished)

NUR SOFIANI, MOHD YUSOF (2019) DESIGN OF A MULTI-SPINDLE IMPACT WRENCH MECHANISM. [Final Year Project Report] (Unpublished)

NUR SYAHIRA, ABU SAMAH (2019) DESIGN AND DEVELOPMENT OF AUTOMATED SWITCHING FOR ENERGY SAVING SYSTEM (ASESS). [Final Year Project Report] (Unpublished)

NURHIDAYAH KUMAR, MUHAMMAD FIRDAUS KUMAR (2019) KINECTIC STUDY & STATISTICAL MODELLING OF SARAWAK PEAT WATER ELECTROCOAGULATION SYSTEM. [Final Year Project Report] (Unpublished)

Nayli Batrisyia, Nordin (2019) Seismic design response spectrum and soil liquefaction assessment for Tanjung Kidurong Power Plant, Bintulu, Sarawak. [Final Year Project Report] (Unpublished)

Nur Hijjah Syazalina, Abdul Rahim (2019) Effect of aggregate system on pervious concrete. [Final Year Project Report] (Unpublished)

Nurull Farah Dillah, Mohd Kashim (2019) The influence of strength eccentricity in displacement of one storey reinforced concrete building due to sequential earthquake. [Final Year Project Report] (Unpublished)

PATRICK RENALDO, RICHARD (2019) EVALUATION OF ELECTROPHORETIC DEPOSITION OF MULTI-WALLED CARBON NANOTUBES ONTO CARBON FIBER. [Final Year Project Report] (Unpublished)

REMBERT, MICHEAL (2019) DESIGN AND DEVELOPMENT OF SOLAR POWERED WIRELESS CHARGER USING INDUCTIVE COUPLING. [Final Year Project Report] (Unpublished)

SHATHISHKOMAR, RAMESH (2019) MATHEMATICAL MODELLING AND OPTIMIZATION OF HYDROGEN PRODUCTION FROM MICROBIAL ELECTROLYSIS CELL BY USING SAGO MILL EFFLUENT / SHATHISHKOMAR RAMESH. [Final Year Project Report] (Unpublished)

SITTI AISHAH, NAJAMUDIN (2019) STEAM SYSTEM OPTIMIZATION AT PALM OIL MILL : CASE STUDY IN SABAH, MALAYSIA. [Final Year Project Report] (Unpublished)

SURAYA, ZULKEFLI (2019) INFLUENCE OF PROPANOL AS ADDITIVE WITH DIESEL KARANJA BIODIESEL BLEND FUEL FOR DIESEL ENGINE. [Final Year Project Report] (Unpublished)

SYAMIMI AMANI, HANUAR (2019) DEVELOPMENT OF WEARABLE ANTENNA FOR HEALTH MONITORING SYSTEM (A STUDY ON DIFFERENT SUBSTRATE PROPERTIES). [Final Year Project Report] (Unpublished)

TIMOTIUS SHARWILL, WILLE (2019) INTEGRATED WI-FI OUTLET SOCKET (WISOC) WITH POWER CONSUMPTION READER. [Final Year Project Report] (Unpublished)

Teh, Xuan Yuan (2019) PREDICTIVE VOLTAGE CONTROL DC-AC QUASI- Z-SOURCE INVERTER USING SECOND ORDER RLC FILTER. [Final Year Project Report] (Unpublished)

VIVI GLORIA, LUCUS (2019) WATER QUALITY MONITORING SYSTEM FOR AQUACULTURE INDUSTRY. [Final Year Project Report] (Unpublished)

WONG, VEI LING (2019) FOCUSING ENHANCEMENT WITH METAMATERIAL LENS APPLICATOR FOR BREAST CANCER HYPERTHERMIA PROCEDURE. [Final Year Project Report] (Unpublished)

YAP, HOOI CHEIN (2019) THE IMPACT OF ORGANIZATIONAL CULTURE TOWARDS THE SUCCESS OF TQM IMPLEMENTATION IN MANUFACTURING COMPANY. [Final Year Project Report] (Unpublished)

YII, Kelvin Seng Hua (2019) EXPERIMENTAL INVESTIGATION ON CBR PERFORMANCE FOR REINFORCED PEAT – NYLON FIBRE WITH SILICA FUME AS ADDITIVE FOR SUBGRADE SOIL. [Final Year Project Report] (Unpublished)

Newspaper Cutting

Yanuar Zulardiansyah, Arief (2019) PLTN Bukan Solusi. [Newspaper Cutting] (In Press)

Picture

Universiti Malaysia Sarawak, Faculty of Engineering (2019) Gambar-gambar Dekan Fakulti Kejuruteraan, UNIMAS. [Picture] (Unpublished)

Proceeding

Ahmed Mohamed, Ahmed Haidar and Adila, Fakhar and Muttaqi, Kashem M (2019) An Effective Power Dispatch Strategy for Clustered Micro-grids while Implementing Optimal Energy Management and Power Sharing Control using Power Line Communication. In: 2019 IEEE Industry Applications Society Annual Meeting, 29 Sept.-3 Oct. 2019, Baltimore, MD, USA, USA.

Ahmed Mohamed, Ahmed Haidar and Shahid, Ullah and Muttaqi, Kashem M and Ahfock, Tony (2019) A Distributed Secondary Control Strategy for Power Sharing and Voltage Regulation by Multiple Converters in DC Micro-grids. In: 2019 International Conference on Electrical, Control And Instrumentation Engineering, 25th November 2019, Hotel Stripes, Kuala Lumpur..

Annie, Joseph and Loh, Woei-Tan and Bong, David B.L. (2019) Quality Assessment for Natural and Screen Content Images. In: IEEE International Conference on Signal and Image Processing Applications (IEEE ICSIPA 2019), 17-19 September 2019, Kuala Lumpur, Malaysia..

Annisa, Jamali and Intan Zaurah, Mat Darus and Hanim, Mohd Yatim and Mat Hussin, Ab Talib (2019) Optimization Of Pid Controller For Double-Link Flexible Robotic Manipulator Using Metaheuristic Algorithms. In: CLAWAR 2019: 22nd International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, 26-28 August 2019, Kuala Lumpur, Malaysia..

Annisa, Jamali and Muhammad Sukri, Hadi and Hanim, Mohd Yatim and Mat Hussin, Ab Talib and Intan Zaurah, Mat Darus (2019) Fuzzy-Pid Based Controler For Active Vibration Control Of Nonlinear Dynamic Systems. In: CLAWAR 2019: 22nd International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, 26-28 August 2019, Kuala Lumpur, Malaysia..

Bong, David Liang Bong and Loh, Woei-Tan (2019) A Modified Structural Similarity Index With Low Computational Complexity. In: Proceedings of 2019 International Symposium on Intelligent Signal Processing and Communication Systems, 3-6 December 2019, Taipei, Taiwan.

Bong, David Liang Bong and Tze, Kian Jong (2019) Evaluation of Local Features for Near-Uniform Scene Images. In: 2019 Proceedings of IEEE International Conference on Signal and Image Processing Applications, 17-19 September 2019, Kuala Lumpur, Malaysia..

Gaddafi, Ismaili and Taksiah, A. Majid (2019) Establishment an empirical relationship equation of magnitude conversion specific for Malaysia. In: 4th National Engineering Conference Awam’07, 29-31 Mei 2007, Langkawi, Kedah.

Hazrul, Mohamad Basri and Kasumawati, Lias and Mekhilef, Saad (2019) Predictive Current Control of Three Level Neutral Point Clamped Based Indirect Matrix Converter. In: 2019 International UNIMAS STEM 12th Engineering Conference (EnCon), 28-29 August 2019, Riverside Majestic Hotel, Kuching, Sarawak.

Hazrul, Mohamad Basri and Kasumawati, Lias and Mekhilef, Saad (2019) Digital Predictive Current Control Fed by Three-Level Indirect Matrix Converter under Unbalanced Power Supply Condition (EE). In: 2019 International UNIMAS STEM 12th Engineering Conference (EnCon), 28-29th August 2019, Riverside Majestic Hotel, Kuching, Sarawak.

Ibrahim, Bin Yakub and Nur Atiqah, Binti Nasir and Nurul Ashraf, Bin Razali (2019) Hydrothermal Liquefaction Of An Industrial Biomass Waste: Brewer’s Spent Grain (Bsg). In: The 2nd International Symposium on Industrial Chemistry and Chemical Technology (ISICCT2019), 28-30 October 2019, Palm Garden Hotel, Putrajaya, Malaysia..

Kamyar, Mehranzamir and Hadi Nabipour, Afrouzi and Zulkurnain, Abdul-Malek and Marwan, Nafea and Shirley, Rufus (2019) Detecting Sensor Coordination in a Calibrated Lightning Locating System. In: International Conference on Electrical Engineering and Computer Science (ICECOS) 2019, 2-3 October 2019, Batam, Indonesia.

Kamyar, Mehranzamir and Shirley, Rufus and Hadi Nabipour, Afrouzi and Zulkurnain, Abdul-Malek and Marwan, Nafea (2019) Detecting Sensor Coordination in a Calibrated Lightning Locating System. In: International Conference on Electrical Engineering and Computer Science (ICECOS) 2019, 2-3 October 2019, Batam, Indonesia.

Kashiwabara, Yuki and Lidyana, Binti Roslan and Mohd Danial, Bin Ibrahim and Ochiai, Masayuki and Hashimoto, Hiromu and Sunami, Yuta (2019) Relationship between Casting Condition and Gas Porosity in Magnesium Alloy Die Casting. In: Proceedings of the 8th International Conference on Manufacturing, Machine Design and Tribology (ICMDT2019), 24-27 April 2019, Kagoshima, Japan.

M.F, Ashari and Akihiko, Hanafusa and Yuji, Kubota and Daigo, Nishimori (2019) Preliminary Study on Muscle Force Estimation using Musculoskeletal Model for Upper Limb Rehabilitation with Assistive Device for Home Setting. In: International Conference on Biomedical Engineering (ICoBE), 26-27 August 2019, Penang, Malaysia.

May, Raksmey and Muhamad Fuad, Bin Shukor and Kong, Sitha (2019) Assessment of Groundwater Abstraction for Factories in Klang, Selangor. In: 2019 International UNIMAS STEM 12th Engineering Conference (EnCon), 28-29 August, 2019, Riverside Majestic Hotel.

Mohammad Omar, Abdullah (2019) Applied Energy with Cleaner Environment and Smarter Schemes towards Industry 4.0. In: The International Conference on Innovative Applied Energy (IAPE’19), 14-15 March, 2019, Oxford, United Kingdom.

Mohammed Enamul, Hoque and Kuryati, Kipli and Tengku Mohd Afendi, Zulcaffle and Dayang Azra, Awang Mat and Annie, Joseph and Nurdiani, Zamhari and Rohana, Sapawi and Mohammad, Yasin (2019) Segmentation of Retinal Microvasculature Based on Iterative Self-Organizing Data Analysis Technique (ISODATA). In: 2019 International UNIMAS STEM 12th Engineering Conference (EnCon), 28 August 2019.

Mohd Ameerul Iman, Mohd Ariff and Then, Yi Lung and Tay, Fei Siang (2019) Establish Connection Between Remote Areas and City to Improve Healthcare Services. In: 2019 International Conference on Green and Human Information Technology (ICGHIT), 15-17 January 2019, Kuala Lumpur, Malaysia.

Mohd Danial, Bin Ibrahim and Ger, Lian Tan and Lidyana, Binti Roslan and Kashiwabara, Yuki and Jasmine, Jendia and Sunami, Yuta (2019) Numerical and Experimental Analysis on Runner and Gate Positioning for Magnesium Alloy Die-Casted Test Piece. In: 7th Asia Conference on Mechanical and Materials Engineering (ACMME 2019),, 14-17th June 2019, Tokyo, Japan.

Mohd Farid, Bin Atan and Mohd Azlan, Bin Hussain (2019) Dynamic Modeling : The influence of the Improved Solid Elutriation Correlation on the Two-Phase Mathematical Model of Polyolefin Polymerization in Gas-Phase Fluidized Bed Reactor. In: 26th Regional Symposium on Chemical Engineering (RSCE 2019), 30-31 October 2019, Armada Hotel, Petaling Jaya, Malaysia.

Muhammad Syukri Imran, Abdullah and Noor Muhammad, Abdul Rahman and Tauran Zaidi, Ahmad Zaidi and Khairul Azmy, Kamaluddin (2019) Latest Development on Sustainability Programme Initiatives in Malaysian Healthcare Facility Management. In: 37th Conference of ASEAN Federation of Engineering Organisations (CAFEO37), 11-14 Sept 2019, Jakarta.

Shamsiah, Binti Suhaili and Watanabe, Takahiro (2019) High-Throughput of SHA-256 Hash Function with Unfolding Transformation. In: 7th Global Conference on Engineering and Technology 2019, 6-7 December 2019, Penang, Malaysia.

Siti Sufiah, Binti Abd Wahid and Yanuar Zulardiansyah, Arief and Naemah, Binti Mubarakah (2019) Optimization of Hybrid Renewable Energy in Malaysia Remote Rural Area Using HOMER Software. In: 2019 3rd International Conference on Electrical, Telecommunication and Computer Engineering (ELTICOM), 16-17 Sept. 2019, Medan, Indonesia, Indonesia.

Yanuar Zulardiansyah, Arief and Anwari, Makbul and Wicaksono, Tri and Djaja, Adi Fitra (2019) Tinjauan Regulasi Pembangunan Pltn Dan Kebutuhan Energi Listrik Di Kalimantan Barat. In: Seminar Nasional Infrastruktur Energi Nuklir 2019 (SIEN 2019), 10 October 2019, Universitas Tanjungpura Pontianak (UNTAN).

Program Book

Universiti Malaysia Sarawak, Faculty of Engineering (2019) Internationa UNIMAS STEM 12th Engineering Conference (ENCON) Engineering Conference, 28-29 August 2019, Kuching, Sarawak. [Program Book] (Unpublished)

Thesis

Anisia, Jati Sang (2019) Application of Fuzzy FMEA to Rainfed Lowland Rice Production in Sarawak: Environmental, Health and Safety Perspectives. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Dayang Siti Amira, Binti Awg Yusuf (2019) Design of CMOS Power Amplifier with Notch Filter for Ultra Wideband System. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Dewi, Harreh (2019) Production and Engine Performance Analysis of Karanja Biodiesel using Synthesized CaO Catalyst. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Dyg Khayrunsalihaty Bariyyah, Bt Abang Othman (2019) Enhanced Beacon Scheduling for Cluster Tree Topology in Wireless Personal Area Network. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Erdawaty, Mohd Jaafar (2019) Synthesis and Characterization of Graphene Oxide (GO) and Reduced Graphene Oxide (rGO) Thin Films as a Hole Transport Layer (HTL) on Azo-Kojic Compound for Organic Photovoltaic (OPV) Applications. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Eustacius Jude, Anak Joseph Linggong (2019) Nearfield Electromagnetic Imaging Technique For Brain Tumour Detection. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Fabian Halley Pata, Alban Dattu (2019) Investigation of Finite Element Model of Futsal Ball and Simulation of its Impact Characteristics. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Georgie, Wong Abdullah (2019) Environmental Management For Energy Industry : Application of ISO 14001 EMS and QUAL2K Modeling System. PhD thesis, Universiti Malaysia Sarawak, (UNIMAS).

Harmen, Bin Muda (2019) Techno-economic Analysis of a Stand-alone Photovoltaic-Diesel Hybrid System for Rural Applications. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Irfan, Bin Ahmad Afip (2019) Investigation on the Correlation between Electrical Resistivity and Vane Shear Test of Peat Soil. Masters thesis, Universiti Malaysia Sarawak.

Juliana, Binti Nawawi (2019) Automated Scaling Region of Interest with Iterative Edge Preserving in Forward-Backward Time-Stepping. Masters thesis, University Malaysia Sarawak.

Lau, Stephenie May Kei (2019) A Quantitative Evaluation Method for Standard Form of Contract in Malaysia. Masters thesis, Universiti Malaysia Sarawak.

Lee, Melissa May Syn (2019) Modeling on the Likelihood of Driving Errors Due to Distracted Driving Behaviour (DDB) Associated with Mobile Phone Usage in Malaysia. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Leong, Geok Teng (2019) Efficient Hydraulic Flushing Gate System for Managing Sedimentation in Open Drain. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Loh, Siew Ling (2019) Potential of StormPav Green Pavement System Incorporating Stormwater Management. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Mohamad Faizal, Mahsen (2019) Detection and Localization of Object using Forward-Backward Time-Stepping for Through-wall Imaging Application. Masters thesis, Universiti Malaysia Sarawak.

Mohamad Zulfika Hazielim, Bin Zakaria (2019) Alkali modification of aluminium dross as an adsorbent for removal of Congo red in aqueous solution. Masters thesis, Universiti Malaysia Sarawak.

Mohd Rahmat, Bin A Rahman (2019) Modelling of Casting Shots in Industrial Mold of High Pressure Die Casting. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Muhammad Naim, Bin Leman (2019) Development of A Convection Dryer for Sliced Fish Cracker. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Muhammad Qasim, Khan (2019) Development of Phasor Measurement Unit Based Fault Detection and Faulty Line Classification in Electrical Power System. Masters thesis, University Malaysia Sarawak, UNIMAS.

Ngian, Seng Kai (2019) Principles of Prioritization for Failure Mode and Effects Analysis with Missing Risk Ratings. Masters thesis, Universiti Malaysia Sarawak.

Nurhanna Zulaikha, Binti Ishak (2019) Development of Ankle Foot Orthosis (AFO) Using Pneumatic Artificial Muscle (PAM). Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Nurul Syuhada, Binti Hasim (2019) The Design of Compact Planar Antenna for Microwave Tomography System. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Ong, Sylvia Ai Ling (2019) Multiple Symbol Double Differential Transmission for Cooperative Wireless Communication Networks with Different Mobility. PhD thesis, Universiti Malaysia Sarawak (UNIMAS).

Saidu Adamu, Abubakar (2019) Development of Antipodal Vivaldi Antenna with Modified Electromagnetic Band Gap Structures for Ultra-Wideband Indoor Applications. PhD thesis, Universiti Malaysia Sarawak (UNIMAS).

Siti Maryam, Binti Silahuddin (2019) Development of modular vibration test rig with machine fault testing and analysis. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Ting, Sing Hong (2019) Development of a Virtual Reality Assistive Tool for Individual with Autism Spectrum Disorder. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Ting, Winnie Huong Tien (2019) Optimisation of Phytoremediation Process for Ammoniacal Nitrogen Reduction in Wastewater. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Ting`, Wee Kiet (2019) Stress-Strain-Temperature Behaviour of Deposited Cemented Slurry. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Yong, Guang (2019) Forward-Backward Time Stepping with Automated Edge-preserving Regularization Technique for Wood Defects Detection. PhD thesis, Universiti Malaysia Sarawak (UNIMAS).

This list was generated on Thu Dec 26 18:33:08 2024 +08.

Export as	Atom RSS 1.0 RSS 2.0

Items where Division is "Academic Faculties, Institutes and Centres > Faculty of EngineeringFaculties, Institutes, Centres > Faculty of Engineering" and Year is 2019