- Home
- About
- Articles on COVID-19
- Browse
- UNIMAS Niche Areas
- Corporate Memory
- Statistics
- How to Upload Article
 | Up a level |
Abba, I. and Thelaha, Masri and Wan Azlan, Wan Zainal Abidin and Kismet, Hong Ping and Bong, V. P. and Hussaini, N. B. and Mardina, Abdullah (2015) External antenna design for GPS signal reception enhancement. International Conference on Space Science and Communication, IconSpace, 2015. pp. 17-22. ISSN 21654301
Adnan, Ahmad and Sidra, Waheed and Shahzad, Maqsood Khan and Sabad, e-Gul and Muhammad, Shafiq and Muhammad, Farooq and Khairuddin, Sanaullah and Tahir, Jamil (2015) Effect of silica on the properties of cellulose acetatepolyethylene glycol membranes for reverse osmosis. Desalination, 355 (1). pp. 1-10. ISSN 0011-9164
Adzlan, A. and Tsutsumi, S. and Gotoda, H. (2015) Near-field behavior of variable property jet with swirling flow generated by a change in gravitational orientation. Physics of Fluids, 27 (2). ISSN 1070-6631
Afzan Ahmad, Zaini and Intan Rohani, Endut (2015) Assessing awareness, understanding, Construction practices and Innovation towards Green Construction. The 6th International Conference On Construction Engineering And Project Management (ICCEPM 2015). ISSN ISBN: 978-89-954572-6-9
Afzan Ahmad, Zaini and Intan Rohani, Endut (2015) Critical Review on the Theoretical Framework and Critical Success Factors in Green Construction. InCIEC 2014. ISSN ISBN : 978-981-287-290-6 (Online)
Ahmed Mohamed, Ahmed Haidar and Kashem M., Muttaqi and Mohammed H., Haque (2015) Multistage time-variant electric vehicle load modelling for capturing accurate electric vehicle behaviour and electric vehicle impact on electricity distribution grids. IET Generation, Transmission & Distribution, 9 (16). pp. 2705-2716. ISSN 1751-8687
Ahmed Mohamed, Ahmed Haidar and Muttaqi, Kashem M and Danny, Sutanto (2015) Smart Grid and its future perspectives in Australia. Renewable and Sustainable Energy Reviews, 51. pp. 1375-1389. ISSN 1364-0321
Al-Khalid, Hj Othman and Bello, Olalekan and Hushairi, Zen and Khairuddin, Abdul Hamid (2015) Computing Amplify-and-Forward Relay Amplification Factor to Improve Total Capacity at Destination. American Journal of Applied Sciences, 12 (8). pp. 572-580. ISSN 1554-3641
Al-Khalid, Hj Othman and Bello, Olalekan and Hushairi, Zen and Khairuddin, Bin Ab Hamid (2015) Utility-based Scheduling Frameworks for Efficient Quality-ofService Differentiation in a Mixture of Real-time and Nonreal-time Traffics. Journal of Computer Science, 11 (7). pp. 845-854. ISSN 1552-6607
Al-Khalid, Hj Othman and Hushairi, Zen and Ong, Sylvia Ai Ling and Mahmood, Adnan (2015) A Survey of Receiver Designs for Cooperative Diversity in the Presence of Frequency Offset. International Journal of Computer Science and Information Security (IJCSIS),, 13 (12). pp. 53-58. ISSN 1947-5500
Al-Khalid, Hj Othman and Mohd Azlan, Ismail and Hushairi, Zen (2015) An Experience with Simulation Modelling for Radial Flow Pump. International Journal of Emerging Engineering Research and Technology, 3 (11). pp. 1-6. ISSN 2349-4409
Al-Khalid, Hj Othman and Mohd Azlan, Ismail and Hushairi, Zen (2015) Numerical Simulation on End Suction Centrifugal Pump Running in Inverse Flow for Microhydro Applications. Applied Mechanics and Materials, 773-74. pp. 358-362. ISSN 1662-7482
Ana Sakura, Zainal Abidin (2015) Development of Track Wheel for In-pipe Robot Application. Procedia Computer Science, 76. pp. 500-505. ISSN 1877-0509
Ana Sakura, Zainal Abidin (2015) Development of cleaning device for In-pipe Robot Application. Procedia Computer Science, 76. pp. 506-511. ISSN 1877-0509
Andrew Ragai, Henry Rigit and Abdul Qayoom, Jakhrani and Ijen, Dakek and Ahsanullah, Soomro (2015) Flow visualization of a dielectric barrier discharge plasma actuator. NED University Journal Of Research - Applied Sciences, 12 (4). pp. 67-80. ISSN 1023-3873
Anyi, M. and Kirke, B. (2015) Tests on a non-clogging hydrokinetic turbine. Energy for Sustainable Development, 25. pp. 50-55. ISSN 0973-0826
Baharun, A. (2015) Efficient planning of electrical distribution system for consumers in Sarawak, Malaysia. Jurnal Teknologi, 72 (1). pp. 103-109. ISSN 01279696
Bakri, M.K.B. and Jayamani, E. and Heng, S.K. and Sinin, Hamdan (2015) Reinforced Oil Palm Fiber Epoxy Composites: An Investigation on Chemical Treatment of Fibers on Acoustical, Morphological, Mechanical and Spectral Properties. Materials Today: Proceedings, 2 (4-5). pp. 2747-2756. ISSN 2214-7853
Bashir, S. and Teo, Y.Y. and Ramesh, S. and Ramesh, K. and Khan, A.A. (2015) N-succinyl chitosan preparation, characterization, properties and biomedical applications: A state of the art review. Reviews in Chemical Engineering, 31 (6). pp. 563-597. ISSN 0167-8299
Bong, David Boon Liang and Bee, Ee Khoo (2015) Objective blur assessment based on contraction errors of local contrast maps. Multimedia Tools and Applications, 74 (17). pp. 7355-7378. ISSN 1380-7501
Brabha, H Nagaratnam and Ahmed, Faheem and Muhammad Ekhlasur, Rahman and Mohammad, Abdul Mannan and Moussa, Leblouba (2015) Mechanical and Durability Properties of Medium Strength Self-Compacting Concrete with High-Volume Fly Ash and Blended Aggregates. Periodica Polytechnica Civil Engineering, 59 (2). pp. 155-164. ISSN 0553-6626
Burmamu, B.R. and Law, P.L. (2015) Evaluation of Some Physical Properties of Soils as Factors Influencing Movement of Contaminants through Porous Soils Media of Gwari market Dumpsites, Yola, Nigeria. International Research Journal of Engineering and Technology (IRJET), 2 (9). pp. 389-397. ISSN 2395-0056
Burmamu, B.R. and Law, P.L. (2015) Lagrangian Model Framework: A Cutting Edge towards Predicting Pollutants Transport in River Benue of Greater City Yola, Nigeria. Global Journal For Research Analysis, 4 (11). pp. 148-151. ISSN 2277 - 8160
Chai, Nee Ping and Wan Azlan, Wan Zainal Abidin and Wan Hashim, Wan Ibrahim and Kismet, Anak Hong Ping (2015) A review on recent available positioning technologies and its advancement. Malaysian Journal of Science, 34 (1). pp. 113-128. ISSN 13943065
Chin Peow, Woon and Poi, Ngian Shek and Mahmood, Bin Md Tahir and Ahmad Kueh, Beng Hong (2015) Compressive strength of ground waste seashells in cement mortars for masonry and plastering. Applied Mechanics and Materials, 727. pp. 167-170. ISSN 1662-7482
Choo, Jenny and Nuraini, Binti Mohd Sabri and Tan, Daniel and Aazani, Mujahid and Müller, Moritz (2015) Heavy Metal Resistant Endophytic Fungi Isolated from Nypa fruticans in Kuching Wetland National Park. Ocean Science Journal, 50 (2). pp. 445-453. ISSN 2005-7172
Chuan, Min Tian and Mohd Narzam, Jaffar and Harunal Rejan, Ramji and Mohammad Omar, Abdullah (2015) Custom design of a hanging cooling water power generating system applied to a Sensitive cooling water discharge weir in a seaside power plant : A challenging energy scheme. Energy, 81. pp. 511-518. ISSN 0360-5442
Dayang Salyani, Abang Mahmod and Glandut, Nicolas and Amir Azam, Khan and Labbe, Jean Claude (2015) Surface oxidation of porous ZrB2-SiC ceramic composites by continuous-wave ytterbium fibre laser. Applied Surface Science, 357. pp. 1982-1990. ISSN 0169-4332
Doherty, J.P. and Hasan, A. and Suazo, G.H. and Fourie, A. (2015) Investigation of some controllable factors that impact the stress state in cemented paste backfill. Canadian Geotechnical Journal, 52 (12). 1901--1912. ISSN 0008-3674
Elammaran, Jayamani and Sinin, Hamdan and Muhammad Khusairy, Bin Bakri and Soon, Kok Heng and Md Rezaur, Rahman and Akshay, Kakar (2015) Analysis of natural fiber polymer composites: Effects of alkaline treatment on sound absorption. Journal of Reinforced Plastics and Composites, 35 (9). pp. 703-711. ISSN 07316844
Evon, E.W. Tang and Mah, D.Y.S. (2015) Rainwater Harvesting System in a Congested Residential Estate. Journal of Applied Science & Process Engineering, 2 (2). pp. 64-73. ISSN 2289-7771
Faatima Zahra, Ahmat Asim and Norsuzailina, Mohamed Sutan (2015) Thermal Characterization of Pozzolanic Activity of Hydrated Cement System Modified by Silica Based Industrial Waste. Journal of Applied Science & Process Engineering, 2 (1). pp. 1-7. ISSN 2289-7771
Fauzan, Sahdi and White, David J. and Gaudin, Christophe and Randolph, Mark F. and Boylan, Noel (2015) Laboratory development of a vertically oriented penetrometer for shallow seabed characterization. Canadian Geotechnical Journal, 53 (1). pp. 93-102. ISSN 0008-3674
Gurumurthy, Hegde and Shoriya Aruni, Abdul Manaf and Anuj, Kumar and Gomaa, A M Ali and Kwok Feng, Chong and Zainab, Ngaini and K V, Sharma (2015) Biowaste Sago Bark Based Catalyst Free Carbon Nanospheres: Waste to Wealth Approach. ACS Sustainable Chemistry & Engineering, 3 (9). pp. 2247-2253.
HamidReza, Namazi and Mona, Kiminezhadmalaie (2015) Diagnosis of Lung Cancer by Fractal Analysis of Damaged DNA. Computational and Mathematical Methods in Medicine, 2015. ISSN 1537-744X
Hamidreza, Namazi and Vladimir V., Kulish (2015) Fractional Diffusion Based Modelling and Prediction of Human Brain Response to External Stimuli. Computational and Mathematical Methods in Medicine, 2015. ISSN 1748-670X
Ho, Lee Lee and Law, Puong Ling (2015) Impact of Implementation of ISO 14001 Environmental Management Systems on Environmental Performance: A Case Study. International Journal of Engineering Research and Science & Technology, 4 (1). ISSN 2319-5991
Hushairi, Zen and Adnan, Mahmood and Al-Khalid, Othman (2015) An optimized travelling time estimation mechanism for minimizing handover failures and unnecessary handovers from cellular networks to WLANs. International Journal of Pervasive Computing and Communications, 11 (1). pp. 2-16. ISSN 1742-7371
Ibrahim, Abba and Wan Azlan, Wan Zainal Abidin and T., Masri and Kismet, Hong Ping and M. S., Muhammad and Pai, B.V. (2015) IONOSPHERIC EFFECTS ON GPS SIGNAL IN LOW IONOSPHERIC EFFECTS ON GPS SIGNAL IN LOW GPS SIGNAL IN LOW-LATITUDE REGION: A LATITUDE REGION : A CASE STUDY REVIEW OF SOUTH EAST ASIA AND AFRICA. Nigerian Journal of Technology (NIJOTECH), 34 (3). pp. 523-529. ISSN 0331-8443
Ibrahim, S.H and Liew, A.A.H and Nawi, M.N.M and Yusoff, M. N (2015) Reinventing Traditional Malay House for Sustainable Housing Design: Obstacle and Proposed Solution. Jurnal Teknologi, 72 (1). pp. 97-102. ISSN 2180–3722
Jayamani, E. and Sinin, Hamdan and Rahman, M.R. and Bakri, Abdul Karim and Kakar, A. (2015) An investigation of sound absorption coefficient on sisal fiber poly lactic acid bio-composites. Journal of Applied Polymer Science, 132 (34). ISSN 0021-8995
Jayamani, E. and Sinin, Hamdan and Rahman, M.R. and Bakri, M.K.B. (2015) Dielectric Properties of Lignocellulosic Fibers Reinforced Polymer Composites: Effect of Fiber Loading and Alkaline Treatment. Materials Today: Proceedings, 2 (4-5). pp. 2757-2766. ISSN 2214-7853
Jong, Lee Yee and Teo, DCL (2015) Concrete Containing Palm Oil Fuel Ash (POFA) and Oil Palm Shell (OPS) Subjected to Elevated Temperatures. UNIMAS e-Journal of Civil Engineering. ISSN 1984-3874
Kaniraj, S.R and Lee, L.J. and Taib, S.N.L. (2015) Effect of Tidal Fluctuation on the Stability of Estuarine Structures in Sarawak. UNIMAS e-Journal of Civil Engineering. ISSN 1984-3874
Khairuddin, Sanaullah and Afrasyab, Khan and Mohd Sobri, Takriff (2015) Determining potential of subcooling to attenuate hydrodynamic instabilies for steam-water two phase flow. International Journal of Heat and Mass Transfer, 84. pp. 178-197. ISSN 0017-9310
Khairul Anwar, Mohamad Said and Ibrahim, Yakub and Nurul Ain, Mohamed Alipah (2015) Effects of Solvent/Solid Ratio and Temperature on the Kinetics of Vitamin C Extraction from Musa Acuminata. Journal of Applied Science & Process Engineering, 2 (2). pp. 107-115. ISSN 2289-7771
Khairul Anwar, Mohamad Said and Mohamed Afizal, Mohamed Amin (2015) Overview on the Response Surface Methodology (RSM) in Extraction Processes. Journal of Applied Science & Process Engineering, 2 (1). ISSN 2289-7771
Kismet, Hong Ping and Ibrahim, Abba and Thelaha, Hj Masri and Wan Azlan, Wan Zainal Abidin and Muhammad, M.S. and Bong, Voon Pai (2015) onospheric Effects on GPS Signal in Low-Latitude Region : A Case Study Review of South East Asia and Africa. Nigerian Journal of Technology, 34 (3). pp. 523-529. ISSN 0331-8443
Koon, Beng Ooi and Zou, Patrick X.W. and Mohammad Omar, Abdullah (2015) A Simulation Study of Passively Heated Residential Buildings. Procedia Engineering, 121. pp. 749-756. ISSN 1877-7058
Kuryati, Kipli and Abbas, Z. Kouzani (2015) Degree of contribution (DoC) feature selection algorithm for structural brain MRI volumetric features in depression detection. International Journal of Computer Assisted Radiology and Surgery, 10 (7). pp. 1003-1016. ISSN 1861-6410
Lai, J.C-H. and Rahman, M.R. and Sinin, Hamdan and Liew, F.K. and Rahman, M.M. and Hossen, M.F. (2015) Impact of nanoclay on physicomechanical and thermal analysis of polyvinyl alcohol/fumed silica/clay nanocomposites. Journal of Applied Polymer Science, 132 (15). ISSN 0021-8995
Lai, Josephine Chang Hui and Md. Rezaur, Rahman and Sinin, Hamdan (2015) Physical, Mechanical, and Thermal Analysis of Polylactic Acid/Fumed Silica/Clay (1.28E) Nanocomposites. International Journal of Polymer Science, 2015. pp. 1-8. ISSN 16879422
Laja Uggah, Louis and Abdul Manaf, Ahmad Azaini (2015) Overcoming the Uncanny Valley Theory in Digital Characters Based on Human Attitudes. Pertanika Journal Of Social Sciences & Humanities, 23. pp. 13-22. ISSN JSSH-1307-2015
Lawan, S.M and Abidin, W.A.W.Z and Chai, W.Y and Baharun, A. and Masri, T. (2015) Statistical Modelling of Long-Term Wind Speed Data. American Journal of Computer Science and Information Technology, 5 (1). ISSN 2349-3917
Lawan, S.M and Abidin, W.A.W.Z. and Lawan, A.M. and Mustapha, M. and Bichi, S.L. (2015) ANN and GIS-assisted methodology for wind resource assessment (WRA) in Sarawak. Jurnal Teknologi, 77 (12). pp. 75-80. ISSN 1279696
Liew, Fui Kiew and Sinin, Hamdan and Md. Rezaur, Rahman and Mohamad, Rusop and Josephine, Chang Hui Lai and Md. Faruk, Hossen and Md. Mizanur, Rahman (2015) Synthesis and Characterization of Cellulose from Green Bamboo by Chemical Treatment with Mechanical Process. Journal of Chemistry, 2015. ISSN 2090-9071
Lim, Soh Fong (2015) Kinetic study on removal of heavy metal ions from aqueous solution by using soils. Environmental Science and Pollution Research, 22 (13). pp. 10144-10158. ISSN 09441344
Lim, Soh Fong and Lee, Agnes Yung Weng (2015) Kinetic study on removal of heavy metal ions from aqueous solution by using soil. Environmental Science and Pollution Research, 22. pp. 10144-10158. ISSN 1614-7499
Magdalene, Andrew-Munot (2015) An Insight into Used-Products Remanufacturing. Journal of Advanced Review on Scientific Research, 8 (1). pp. 9-18. ISSN 2289-7887
Magdalene, Andrew-Munot and Raafat, N Ibrahim and Ervina, Junaidi (2015) An Overview of Used-Products Remanufacturing. Mechanical Engineering Research, 5 (1). ISSN 1927-0615
Mah, D.Y.S. and Pui, Allan P.P. (2015) Field Study of Riparian Zone along Sarawak River at Bintawa, Kuching. UNIMAS e-Journal of Civil Engineering. ISSN 1984-3874
Mahmood, Ali and Mohd Sapuan, Salit and Karmegam, Karuppiah and Abu Saleh, Ahmed (2015) Evaluation on discomfort level among students using desks in classrooms. Jurnal Teknologi, 77 (27). pp. 127-134. ISSN 1279696
Maleque, M.A. and Ghazal, B.A. and Ali, M.Y. and Hayyan, M. and Ahmed, A.S. (2015) Wear behaviour of TiC coated AISI 4340 steel produced by TIG surface melting. Materials Science Forum, 819. pp. 76-80. ISSN 2555476
Mat, D.A.A and Pokharel, R.K and Yoshida, K. and Kanaya, H. (2015) Comparison of 60GHz CSRRs Ground Shield and Patterned Ground Shield On-chip Bandpass Filters Designed for 0.18μm CMOS Technology. IOSR Journal of Electronics and Communication Engineering, 10 (1). pp. 87-90. ISSN 2278-2834
Md. Azharul, Islam and I.A.W., Tan and A., Benhouria and M., Asif and B.H., Hameed (2015) Mesoporous and adsorptive properties of palm date seed activated carbon prepared via sequential hydrothermal carbonization and sodium hydroxide activation. Chemical Engineering Journal, 270. pp. 187-195. ISSN 1385-8947
Md. Faruk, Hossen and Sinin, Hamdan and Md. Rezaur, Rahman (2015) Review on the Risk Assessment of Heavy Metals in Malaysian Clams. The Scientific World Journal. ISSN 1537-744X
Md. Faruk, Hossen and Sinin, Hamdan and Md. Rezaur, Rahman and Md. Mizanur, Rahman and Fui, Kiew Liew and Josephine, Changhui Lai (2015) Effect of fiber treatment and nanoclay on the tensile properties of jute fiber reinforced polyethylene/clay nanocomposites. Fibers and Polymers, 16 (2). pp. 479-485. ISSN 12299197
Md. Mizanur, Rahman and Md. Rezaur, Rahman and Sinin, Hamdan and Md. Faruk, Hossen and Josephine, Chang Hui Lai and Fui, Kiew Liew (2015) Synthesis of Cotton from Tossa Jute Fiber and Comparison with Original Cotton. International Journal of Polymer Science, 2015. ISSN 16879422
Md. Rezaur, Rahman and Sinin, Hamdan and Dayang Maryani, Awang Hashim and Md. Saiful, Islam and Hitoshi, Takagi (2015) Bamboo fiber polypropylene composites: Effect of fiber treatment and nano clay on mechanical and thermal properties. Journal of Vinyl and Additive Technology, 21 (4). pp. 253-258. ISSN 1548-0585
Md. Rezaur, Rahman and Sinin, Hamdan and Mahbub, Hasan and Ruby, Baini and Abu A., Salleh (2015) Physical, Mechanical, and Thermal Properties of Wood Flour Reinforced Maleic Anhydride Grafted Unsaturated Polyester (UP) Biocomposites. BioResources, 10 (3). ISSN 1930-2126
Mohammad, Abdul Mannan and Hidayati, Asrah and Abdul Karim, Mirasa (2015) The Performance of Ultrafine Palm Oil Fuel Ash in Suppressing the Alkali Silica Reaction in Mortar Bar. International Journal of Engineering and Applied Sciences (IJEAS), 2 (9). pp. 60-66. ISSN 2394-3661
Mohd Syahmi, Jamaludin and A., Zulkharnain and A.A., Khan and N., Wagiman (2015) Effect of Glycidyl Methacrylate on Water Absorption Properties of Sago Hampas Biocomposite. Journal of Civil Engineering, Science and Technology, 6 (2). pp. 34-38. ISSN 2141-2634
Mulyani, Rini and Raudhah, Ahmadi and Pilakoutas, Kypros and Hajirasouliha, Iman and Taufik, , (2015) A multi-hazard risk assessment of buildings in Padang city. Procedia Engineering, 125. pp. 1094-1100. ISSN 18777058
N. Mohamed, Sutan and I., Yakub and M. S., Jaafar and K. A., Matori and S. K., Sahari (2015) Sustainable Nanopozzolan Modified Cement: Characterizations and Morphology of Calcium Silicate Hydrate during Hydration. Journal of Nanomaterials, 2015.
Nafisa, Tamanna and Norsuzailina, Mohamed Sutan and Ibrahim, Yakub and Teo, Delsye Ching Lee and Ezzaq Farhan, Ahmad (2015) Influence of Mortar Incorporating Silica Based Waste Material on the Formation of C-S-H and Mechanical Strength Properties. Applied Mechanics and Materials, 695. pp. 647-650. ISSN 1662-7482
Nagaratnam, Brabha H and Faheem, Ahmed and Muhammad Ekhlasur, Rahman and Mohammad Abdul, Mannan and Leblouba, Moussa (2015) Mechanical and durability properties of medium strength self-compacting concrete with high-volume fly ash and blended aggregates. Periodica Polytechnica: Civil Engineering, 59 (2). pp. 155-164. ISSN 05536626
Nasser, R.Afshar and Efarina, A.Hamit (2015) RAINWATER HARVESTING IN KOTA SAMARAHAN. International Journal of Research in Engineering and Technology, 4 (2). ISSN 2321-7308
Nawi, M.N.M and Shaharanee, I.N.M and Hashim, K.F. and Azman, M.N.A. and Ibrahim, S.H. (2015) Qualitative analysis on the barriers of industrialised building system (IBS) uptake in Malaysian construction projects. Advanced Science Letters, 21 (6). pp. 2134-2138. ISSN 1936-6612
Ng, Shi Wei and Kismet, Hong Ping and Lim, Sin Yee and Wan Azlan, Bin Wan Zainal Abidin (2015) Reconstruction of extremely dense breast composition Utilizing inverse scattering technique integrated with Frequency-hopping approach. ARPN Journal of Engineering and Applied Sciences, 10 (18). pp. 8479-8484. ISSN 1819-6608
Norhuzaimin, Julai (2015) The Impact of Soft Error on C-Elements Due to Process Corner Variation and Temperature. Journal of Applied Science & Process Engineering, 2 (2). pp. 83-96. ISSN 2289-7771
Nur Syahina, Yahya and Gaddafi, Ismaili (2015) Mechanical Properties of Endospermum diadenum sp. Grown in Sarawak. International Advanced Research Journal in Science, Engineering and Technology, 2 (11). pp. 139-143. ISSN 2393-8021
Nuramalina, Bohari and Wan Azlan, Bin Wan Zainal Abidin and Martin, Anyi and Dayang Nur Salmi Dharmiza, Awang Salleh (2015) Micro-Hydro/Solar Hybrid System Framework for Off-Grid Application. Journal of Applied Science & Process Engineering, 2 (1). pp. 18-29. ISSN 2289-7771
Pang, S.C and Chin, S.F. and Nadirah, A. and Tay, S.H. and Yazid, S.N.A.M (2015) Fabrication of polysaccharide-based nanoparticles as drug delivery nanocarriers. ECS Transactions, 66 (37). pp. 15-32. ISSN 1938-5862
Prashobh, Karunakaran (2015) The Options And Design Improvements Of The Electric Grid Of Sarawak As An Example For Developing Countries. Global Journal Of Engineering Science And Researches, 2 (6). pp. 161-170. ISSN 2348 – 8034
Reddy, Anr and Abu Saleh, Ahmed and Islam, M.D. and Sinin, Hamdan (2015) Methanolysis of Crude Jatropha Oil using Heterogeneous Catalyst from the Seashells and Eggshells as Green Biodiesel. ASEAN Journal on Science and Technology for Development, 32 (1). pp. 16-30. ISSN 0217-5460
Reza, Haghighi and HamidReza, Namazi (2015) Algorithm for Identifying Minimum Driver Nodes Based on Structural Controllability. Mathematical Problems in Engineering, 2015. ISSN 1563-5147
Salisu Muhammad, Lawan and Wan Azlan, Wan Zaina Abidinl and Chai, Wangyin and Azhaili, Baharun and Thelaha, Bin Hj Masri (2015) Wind energy potential in kuching areas of sarawak for small-scale power application. International Journal of Engineering Research in Africa, 15. pp. 1-10. ISSN 16633571
Sanaullah, K. and Arshad, Mehmood and Khan, A. and Chughtai, I.R (2015) Buoyancy effects in steeply inclined air-water bubbly shear flow in a rectangular channel. Thermophysics and Aeromechanics, 22 (4). pp. 463-473. ISSN 0869-8643
Sa’don, N.M and Abdul Karim, Abdul Razak and Jao, W. and Wan Lili, W. H. (2015) Sarawak Peat Characteristics and Heat Treatment. UNIMAS e-Journal of Civil Engineering. ISSN 1984-3874
See, Hung Lau and Chee, Khoon Ng and Kai, Meng Tay (2015) Data-driven SIRMs-connected FIS for prediction of external tendon stress. Computers and Concrete, 15 (1). pp. 55-71. ISSN 15988198
Sh., Nadzirah and N., Azizah and Uda, Hashim and Subash C. B., Gopinath and Mohd, Kashif (2015) Titanium Dioxide Nanoparticle-Based Interdigitated Electrodes: A Novel Current to Voltage DNA Biosensor Recognizes E. coli O157:H7. PLoS ONE, 10 (10). ISSN 1932-6203
Shafrida, Sahrani and Akata, Tatsuya and Kuroda, Michiko (2015) The development of novel numerical technique for the analysis of the moving vehicle and moving source. 2015 1st URSI Atlantic Radio Science Conference, URSI AT-RASC 2015. ISSN ISBN: 978-909008628-6
Shahid, Hussain and Tianmo, Liu and Bin, Miao and Muhammad, Kashif and Nimra, Aslam and Muhammad, Rashad and Wen, Zeng and Xianghe, Peng (2015) Embedded ZnO nanorods and gas-sensing properties. Ceramics International, 41 (3). pp. 4861-4866. ISSN 0272-8842
Shahidul, M. I. and Syed Tarmizi, S.S and Abdullah, Yassin and Al Khalid, Othman and Hushairi, Zen and Ting, Ching Hung and Lee, Man Djun (2015) Modeling the Energy Extraction from In-stream Water by Multi Stage Blade System of Cross Flow Micro Hydro Turbine. Procedia Engineering, 105. pp. 488-494.
Shahrol, Mohamaddan and Annisa, Jamali and Ana Sakura, Zainal Abidin and Mohd Syahmi, Jamaludin and Noor Aliah, Abd Majid and Muhamad Fadzli, Ashari and Helmy, Hazmi (2015) Development of Upper Limb Rehabilitation Robot Device for Home Setting. Procedia Computer Science, 76. pp. 376-380. ISSN 1877-0509
Shahrol, Mohamaddan and Syed Tarmizi, Syed Shazali and Ana Sakura, Zainal Abidin and Case, Keith (2015) Human movement representation in virtual environment using gaming software. Jurnal Teknologi, 77 (27). pp. 77-81. ISSN 1279696
Shamsiah, Abdul Rahman and Mohd Suhaimi, Hamzah and Md Suhaimi, Elias and Nazaratul Ashifa, Abdullah Salim and Azian, Hashim and Shakirah, Shukor and Wee, Boon Siong and Abdul Khalik, Wood (2015) A Long Term Study on Characterization and Source Apportionment of Particulate Pollution in Klang Valley, Kuala Lumpur. Aerosol and Air Quality Research, 15 (6). pp. 2291-2304. ISSN 1680-8584
Shanti Faridah, binti Salleh and Hadi, Amirkhani and Robiah, Yunus and Umer, Rashid and Dayang Radhiah, A. B. and Syafiie, Syam (2015) Low-Temperature Dilute Acid Hydrolysis of Oil Palm Frond. Chemical Engineering Communications, 202 (9). pp. 1235-1244. ISSN 563-5201
Shaufe, N.A. and Maleque, M.A and Abu Saleh, Ahmed and Paruka, P. (2015) Effect of Temperature on the Wear Properties of Alloy Steel under Jatropha Curcas Biodiesel. Advanced Materials Research, 1115. pp. 203-206. ISSN 1662-8985
Sherena, Saree and Shanti Faridah, Salleh and Mohd Azlan, Ismail (2015) An Investigation of Stickiness Force of Palm Oil Fruit for Food Processing. Journal of Applied Science & Process Engineering, 2 (2). pp. 74-82. ISSN 2289-7771
Siti Kudnie, Sahari and Nik Amni Fathi, Nik Zaini Fathi and Norsuzailina, Mohammad Sutan and Rohana, Sapawi (2015) Wet chemical cleaning effect on the formation of ultrathin interfacial layer between Germanium (Ge) and high-k dielectric. RSM 2015 - 2015 IEEE Regional Symposium on Micro and Nano Electronics, Proceedings. ISSN ISBN: 978-147998550-0
Soh-Fong, Lim and Sylvester, Usan Matu (2015) Utilization of agro-wastes to produce biofertilizer. International Journal of Energy and Environmental Engineering, 6 (1). pp. 31-35. ISSN Springer Verlag
Tamrin, K. F. and Nukman, Y. and Choudhury, A. and Shirleya, S. (2015) Multiple-objective optimization in precision laser cutting of different thermoplastics. Optics and Lasers in Engineering, 67. pp. 57-65. ISSN 0143-8166
Tamrin, K. F. and Rahmatullah, B. and Samuri, S. M. (2015) Aberration compensation of holographic particle images using digital holographic microscopy. Journal of Modern Optics. ISSN 0950-0340
Tamrin, K. F. and Rahmatullah, B. and Samuri, S. M. (2015) Astigmatism compensation in digital holographic microscopy using complex-amplitude correlation. AIP Conference Proceedings, 1669 (1). ISSN 1551-7616
Tamrin, K. F. and Rahmatullah, B. and Samuri, S. M. (2015) Development of an Off-Axis Digital Holographic Microscope for Large Scale Measurement in Fluid Mechanics. 2nd International Multidisciplinary Microscopy and Microanalysis Congress. ISSN 978-3-319-16918-7 (Print)
Tamrin, K. F. and Rahmatullah, B. and Samuri, S. M. (2015) An experimental investigation of three-dimensional particle aggregation using digital holographic microscopy. Optics and Lasers in Engineering, 68. pp. 93-103. ISSN 0143-8166
Tamrin, K. F. and Zakariyah, S.S. and Sheikh, N.A. (2015) Multi-criteria optimization in CO2 laser ablation of multimode polymer waveguides. Optics and Lasers in Engineering, 75. pp. 48-56. ISSN 0143-8166
Tan, Yie Hua and Mohammad Omar, Abdullah and Cirilo, Nolasco-Hipolito (2015) The potential of waste cooking oil-based biodiesel using heterogeneous catalyst derived from various calcined eggshells coupled with an emulsification technique: A review on the emission reduction and engine performance. Renewable and Sustainable Energy Reviews, 47. pp. 589-603. ISSN 1364-0321
Tan, Yie Hua and Mohammad Omar, Abdullah and Cirilo, Nolasco-Hipolito and Yun Hin, Taufiq-Yap (2015) Waste ostrich- and chicken-eggshells as heterogeneous base catalyst for biodiesel production from used cooking oil: Catalyst characterization and biodiesel yield performance. Applied Energy, 160. pp. 58-70. ISSN 0306-2619
Tay, K.M and Kok, Chin Chai and Chee, Peng Lim (2015) A New Sign Distance-Based Ranking Method for Fuzzy Numbers. Proceedings of the 18th Asia Pacific Symposium on Intelligent and Evolutionary Systems-Volume 2, 2. pp. 55-64. ISSN 2363-6084
Tay, K.M and See, Hung Lau and Chee, Khoon Ng (2015) Data-driven SIRMs-connected FIS for prediction of external tendon stress. Computers and Concrete.
Tay, Kai Meng (2015) An Analytical Interval Fuzzy Inference System for Risk Evaluation and Prioritization in Failure Mode and Effect Analysis. IEEE Systems journal (99). pp. 1-12. ISSN 1932-8184
Tay, Kai Meng and Chian, Haur Jong and Chee, Peng Lim (2015) A clustering-based failure mode and effect analysis model and its application to the edible bird nest industry. Neural Computing and Applications, 26 (3). pp. 551-560. ISSN 1433-3058
Tay, Kai Meng and Jee, T.L and Lim, C.P (2015) A New Two-Stage Fuzzy Inference System-Based Approach to Prioritize Failures in Failure Mode and Effect Analysis. IEEE Transaction on Reliability (99). pp. 1-9. ISSN 0018-9529
Tay, Kai Meng and Kok, Chin Chai and Chee, Peng Lim (2015) A new fuzzy peer assessment methodology for cooperative learning of students. Applied Soft Computing, 32. pp. 468-480. ISSN 1568-4946
Tay, Kai Meng and Wui, Lee Chang and Chee, Peng Lim (2015) Clustering and visualization of failure modes using an evolving tree. Expert Systems with Applications, 42 (20). ISSN 0957-4174
Tay, km (2015) Clustering and visualization of failure modes using an evolving tree. Expert Systems with Applications, 42 (20). pp. 7235-7244. ISSN 10.1016/j.eswa.2015.04.036
Tengku Ahmad Faris, Ku Yusoff and Mohd Farid, Atan and Nazeri, Abdul Rahman and Shanti Faridah, Salleh and Noraziah, Abdul Wahab (2015) Optimization of PID Tuning Using Genetic Algorithm. Journal of Applied Science & Process Engineering, 2 (2). ISSN 2289-7771
Thangavelu, S.K. and Piraiarasi, C. and Abu Saleh, Ahmed and Ani, F.N. (2015) Compatibility of Elastomers in Biodiesel-diesel-bioethanol Blend (BDE). Advanced Materials Research, 1098. pp. 51-57. ISSN 1662-8985
Thangavelu, S.K. and Piraiarasi, C. and Abu Saleh, Ahmed and Ani, F.N. (2015) Corrosion Behavior of Copper in Biodiesel-diesel-bioethanol (BDE). Advanced Materials Research, 1098. pp. 44-50. ISSN 1662-8985
Tze, Ling Jee and Kai, Meng Tay and Chee, Peng Lim (2015) A New Two-Stage Fuzzy Inference System-Based Approach to Prioritize Failures in Failure Mode and Effect Analysis. IEEE Transactions on Reliability, 64 (3). pp. 869-877. ISSN 189529
Voo, Kenny H B and Bong, David B L (2015) Quality assessment for stereoscopic images with JPEG compression errors. 2015 IEEE International Conference on Consumer Electronics - Taiwan, ICCE-TW 2015. pp. 220-221. ISSN ISBN: 978-147998744-3
W. A. W. Z., Abidin and Saufi Affendy, Basri (2015) SNR Analysis On L-Band Mobile Satellite System Under Building Effect. Jurnal Teknologi, 75 (8). pp. 101-105. ISSN 2180–3722
Wan Zainal Abidin, W.A (2015) A Methodology for Wind Energy Evaluation in Complex Terrain Regions of Sarawak. International Journal on Electrical Engineering and Informatics, 7 (2). pp. 264-283. ISSN 20856830
Wui, Lee Chang and Tay, Kai Meng (2015) Clustering and visualization of failure modes using an evolving tree. Expert Systems with Applications, 42 (20). pp. 7235-7244. ISSN 9574174
Yeong, Liang Sim and Putuhena, F.J. (2015) Green building technology initiatives to achieve construction quality and environmental sustainability in the construction industry in Malaysia. Management of Environmental Quality, 26 (2). pp. 233-249. ISSN 1477-7835
Yiin, Chung Loong and Suzana, Yusup and Quitain, Armando T. and Uemura, Yoshimitsu (2015) Physicochemical Properties of Low Transition Temperature Mixtures in Water. Chemical Engineering Transactions, 45. pp. 1525-1530. ISSN 2283-9216
Yusoff, M. N and Nawi, M.N.M and Ibrahim, S.H. (2015) The Study of Green Building Application Awareness. Jurnal Teknologi, 75 (9). pp. 47-50. ISSN 2180–3722
Asrani, Lit and Fariza, Mahyan and Termimi Hidayat, Mahyan (2015) Delay Aware Topology Generation for Network on Chip. LAP LAMBERT Academic Publishing. ISBN 978-3-659-69302-1
Construction Research Institute of Malaysia, CIDB Malaysia (2015) Guidelines for Construction on Peat and Organic Soils in Malaysia. Construction Research Institute of Malaysia (CREAM), Kuala Lumpur, Malaysia. ISBN 978-967-0242-15-6
Mohammad Omar, Abdullah (2015) Inaugural Lecture : Applied Energy and Enviroment Past, Present and the Near Future. Universiti Malaysia Sarawak, (UNIMAS). ISBN 978-967-5527-81-4
Yiin, Chung Loong and Suzana, Yusup and Chiang, Jinn Tan and Bawadi, Abdullah (2015) Determination of Optimum Condition for the Production of Rice Husk‐Derived Bio‐oil by Slow Pyrolysis Process. In: Process Design Strategies for Biomass Conversion Systems. John Wiley & Sons, Ltd..
AUGREY, WALLACE JUSTIN (2015) MODELLING AND OPTIMIZATION OF PALM OIL INDUSTRY BIOMASS WASTES FOR SUSTAINABLE POWER GENERATION IN NORTHERN AND CENTRAL SARAWAK. [Final Year Project Report] (Unpublished)
Chan, Chung Kiet (2015) Study of feasible fuel additive on reducing ic engine exhaust emission and impriving engine performance. [Final Year Project Report] (Unpublished)
Hazeliana, Henry Litong (2015) CONVERSION OF PLASTIC WASTE INTO FUEL USING MICROWAVE-PYROLYZER WITH THE ADDITION OF ALUMINIUM DROSS AS A CATALYST. [Final Year Project Report] (Unpublished)
Jimmy, Gon (2015) EXPERIMENTAL STUDIES OF AIR-WATER TWO-PHASE FLOW IN MICRO-CHANNEL. [Final Year Project Report] (Unpublished)
MOHD RAHMAT, JALANI (2015) PRODUCTION OF BIOGAS FROM RICE STRAW USINGPADDY RICE SOIL AS INOCULANT. [Final Year Project Report] (Unpublished)
MUHAMMAD AFIQ, ZAINAL ABIDIN (2015) EFFECTS OF SALINITY AND pH ON THE GROWTH OF SEAWATER MICROALGAE IN PHOTOBIOREACTOR (PBR) FOR THE PRODUCTION OF BIODIESEL. [Final Year Project Report] (Unpublished)
MUHAMMAD HIFZHAN AMSYAR, ZULKIFLI (2015) PRODUCTION OF BIOGAS USING DAIRY MANURE AS FEEDSTOCK AND RUMEN FLUID AS INOCULUM. [Final Year Project Report] (Unpublished)
Melvina, Tan (2015) POTENTIAL OF PALM KERNEL SHELL (PKS) AS CARBON SUPPORT TO BIMETALLIC CATALYST (Cu-Ce) IN A HYDROCARBON SELECTIVE CATALYTIC REDUCTION (HC-SCR) OF NOx. [Final Year Project Report] (Unpublished)
Mohamad Fais, Che Nuddin (2015) Extraction and Characterisation of Collagen from The Skin of Bluespotted Stingray (Dasyatidae kuhlii). [Final Year Project Report] (Unpublished)
Mohamad Ridzuan, Mohamed Noordin (2015) PRODUCTION OF BIODIESEL FROM WASTE COOKING OIL (WCO) VIA HETEROGENEOUS CATALYSIS USING CHICKEN AND FISH BONE AS CATALYST. [Final Year Project Report] (Unpublished)
Muhamad Azri, Sarbini (2015) Collision avoidance and traffic safety on android. [Final Year Project Report] (Unpublished)
NIK ‘AMIRAH FARHANA, NIK AHMAD LUTFI (2015) OPTIMIZATION STUDY ON MATHEMATICAL MODEL OF CYMBOPOGON WINTERIANUS ESSENTIAL OIL EXTRACTION BY STEAM DISTILLATION. [Final Year Project Report] (Unpublished)
NUR SYAIDATUL AINN, MOHIDI (2015) DRYING OF FRUITS: EXPERIMENTAL AND KINETIC ANALYSIS. [Final Year Project Report] (Unpublished)
Norhidayah, Mohamad Shafee (2015) PRODUCTION AND CHARACTERIZATION OF BIOCOAL FROM AGRICULTURAL BIOMASS USING MICROWAVE-INDUCED TORREFACTION. [Final Year Project Report] (Unpublished)
Nurul Affira, binti Sazali (2015) Geometric parameters of a bluff body affecting vortex distribution that produces flutter. [Final Year Project Report] (Unpublished)
RUBAN, RAMACHANDRAN (2015) REMOVAL OF AQUEOUS CONTAMINANTS USING BANANA PEELWASTE. [Final Year Project Report] (Unpublished)
Shirly, Anak Sinie (2015) Synthesis and spectral analyses of mono-organotin (IV) complexes of thiocarbohydrazone ligand. [Final Year Project Report] (Unpublished)
TAN YONG, CHIN (2015) POTENTIAL OF PALM KERNEL SHELL (PKS) AS CARBON SUPPORT TO BIMETALLIC CATALYST (Mn-Ce) IN HYDROCARBON SELECTIVE CATALYTIC REDUCTION OF NOx. [Final Year Project Report] (Unpublished)
Tengku Ahmad Faris, Ku Yusoff (2015) OPTIMIZATION OF PID TUNING USING GENETIC ALGORITHM. [Final Year Project Report] (Unpublished)
Yana Shaheera, Yunos (2015) Non-newtonian blood flow behaviour in microchannels-application in medical industry. [Final Year Project Report] (Unpublished)
Yong, Hui Sun (2015) Characterization of Pla-based nanocomposites in biomedical applications. [Final Year Project Report] (Unpublished)
Universiti Malaysia Sarawak, Faculty of Engineering (2015) FENG Research Bulletin Vol. 8, December 2015. [Magazine and Newsletter]
Universiti Malaysia Sarawak, Faculty of Engineering (2015) Buku Panduan Perlaksanaan dan Penyediaan Laporan Projek Tahun Akhir Pindaan September 2015. [Manual] (Unpublished)
Universiti Malaysia Sarawak, Faculty of Engineering (2015) Fakulti kejuruteraan : buku panduan perlaksanaan dan penyediaan laporan projek tahun akhir. [Manual]
Universiti Malaysia Sarawak, Faculty of Engineering (2015) Student Guidebook 2015/2016. [Manual]
Ahmed Mohamed, Ahmed Haidar and Hagh, Mehrdad T. and Muttaqi, Kashem M. (2015) Improving Low Voltage Ride-Through using Super Capacitor at the DC Link of Doubly-fed Induction Generator based Wind Turbine. In: 2015 50th International Universities Power Engineering Conference (UPEC), 1-4 Sept. 2015, Stoke on Trent, UK.
Alexander Kiew, Sayok and Mah, D.Y.S. and Lee, Guan Heng (2015) A marriage between hard and soft approaches against sea level rise and floods within Sg Sarawak. In: NAHRIM Workshop with Stakeholders for Project "Assessment of Vulnerability, Impacts and Adaptation in the Sarawak River Basin, Sarawak, Malaysia", 22 October 2015, Sarawak Forestry Corporation. (Unpublished)
Ana Sakura, Zainal Abidin and Rasli, Muslimen and Shahrol, Mohamaddan and Rosnah, Mohd Yusuff and Noorul Amni Qistina, Mohd Daud (2015) Design capabilities development in a Malaysian automotive vendor company. In: 2015 International Conference on Industrial Engineering and Operations Management (IEOM), 3-5 March 2015.
Asrani, Lit and M. Q., Edanan and H. H. A., Halim and Fariza, Mahyan and Termimi Hidayat, Mahyan (2015) Performance Analysis in Mesh Network-on-Chip Topology by using Multilevel Network Partitioning. In: UNIMAS STEM EnCon2015, 8th International Engineering Conference, 7th -9 th October 2015, Kuching, Sarawak, Malaysia.
Bong, V.P. and Wan Zainal Abidin, W.A. and Abdullah, M. and Kismet, Hong Ping and Masri, T. and Bahari, S.A. and Abba, I. (2015) GPS Signal Strength Due to Ionospheric Scintillation : Preliminary Models Over Sarawak. In: International Conference on Space Science and Communication (IconSpace) 2015, 10-12 Aug. 2015, Langkawi.
Boniface, Christopher Jantai and Miyanaga, Norifumi and Mohd Danial, Bin Ibrahim (2015) Radiant Times Series (RTS) For Equatorial Climates. In: Proceedings of the World Engineering Conference and Convention 2015, 29 November - 2 December 2015, Kyoto, Japan.
Charles Hin Joo, Bong and F.J., Putuhena and T.L., Lau and A. Ab., Ghani (2015) Effect of Deposition Thickness on Critical Shear Stress for Incipient Motion of Sediments. In: The 3rd International Conference on Water Resources (ICWR2015), 24-25 November 2015, Bayview Hotel, Langkawi, Kedah, Malaysia.
Fariza, Mahyan and Termimi Hidayat, Mahyan and Asrani, Lit (2015) CAR LICENSE PLATE RECOGNITION BY USING TEMPLATE MATCHING ALGORITHM. In: Proceedings of the 1st National Conference of the Technology And Innovation (TECHON 2015), 9-11 June 2015, Kuching, Sarawak.
Kasumawati, Bt Lias and Mohd Zulkarnaen, Ahmad Narihan and Norlida, Buniyamin (2015) An Antenna with an Embedded EBG Structure for Non Invasive Hyperthermia Cancer Treatment. In: Conference on Biomedical Engineering and Sciences, 8-10 IDecember 2014, Miri, Sarawak.
Mohd Danial, Bin Ibrahim and Miyanaga, Norifumi and Nabilah, Binti Ibrahim and Muhamad Fadzli, Bin Ashari and Amir Azam, Khan and Siti Zaharah, Binti Ibrahim (2015) Macro-Surface Modifications of Subsonic Flow on Airplane Winglets. In: Proceedings of the World Engineering Conference and Convention 2015, 29 November - 2 December 2015, Kyoto, Japan.
Reddy, Anr and Ahmed, A.S. and Md. Saiful, Islam and Sinin, Hamdan (2015) Biodiesel Synthesis From Crude Jatropha Oil Using An Active Heterogeneous Nano Catalyst: An Optimized Process. In: Fundamental Science Congress 2015, Universiti Putra Malaysia.
Sohiful Anuar, Zainol Murad and Mohd Najib, Mohd Yasin and Faizah, Abu Bakar and Norhawati, Ahmad and Rohana, Sapawi (2015) A 2.4 GHz Two Stage CMOS Class-F Power Amplifier for Wireless Applications. In: The Electronic And Green Materials International Conference 2015 (Egm2015), Surabaya, Indonesia.
Thong, C. C. and Teo, DCL and Ng, CK (2015) Chloride Penetration Profile of Polyvinyl Alcohol (PVA) Treated Oil Palm Shell (OPS) Concrete. In: CONCREEP-10: Mechanics and Physics of Creep, Shrinkage, and Durability of Concrete and Concrete Structures, 21-23 September 2015, Vienna University of Technology, Vienna, Austria.
Woei-Tan, Loh and Bong, David B.L. (2015) Video quality assessment method: MD-SSIM. In: IEEE International Conference on Consumer Electronics - Taiwan (ICCE-TW), 6-8 June 2015, Taipei.
Yong, Guang and Kismet, Anak Hong Ping and Sia, Andrew Chew Chie and Ng, Shi Wei and Thelaha, Masri (2015) Preliminary study of Forward-Backward Time-Stepping technique with edge-preserving regularization for object detection applications. In: International Conference on BioSignal Analysis, Processing and Systems (ICBAPS), 2015, 26-28 May 2015, Kuala Lumpur.
Universiti Malaysia Sarawak, Faculty of Engineering (2015) Exam Rules : Procedures To Sit For Final Examination. [Teaching Resource] (Unpublished)
Universiti Malaysia Sarawak, Faculty of Engineering (2015) Oral Presentation Evaluation Form. [Teaching Resource] (Unpublished)
Universiti Malaysia Sarawak, Faculty of Engineering (2015) Plagiarisme. [Teaching Resource] (Unpublished)
Afrasyab, Khan (2015) Evaluation of the hydrodynamic instabilities induced by supersonic steam jet. PhD thesis, Universiti Malaysia Sarawak, (UNIMAS).
Chong, Kok Hing (2015) Development and Evaluation of a Horizontal Air-Staged Biomassto-Heat Energy Converter. PhD thesis, University Malaysia Sarawak, UNIMAS.
Elammaran, Jayamani (2015) Sound absorption and impedance study of lignocellulosic fibre based composites for acoustical applications. PhD thesis, Universiti Malaysia Sarawak, (UNIMAS).
Franklin, Simon (2015) Application of fuzzy logic based failure mode and effect analysis (FMEA) in risk assessment for express boat passenger terminal in Sibu, Sarawak. Masters thesis, Universiti Malaysia Sarawak.
Hong, Aliyu Haliru (2015) The Impact of Using Polluted Benue River and Shinko Waters on Irrigated Vegetables at Geriyo, Nigeria. PhD thesis, University Malaysia Sarawak.
Jong, Chian Haur (2015) Single-Input-Rule-Modules connected fuzzy inference system and its applications to failure mode and effect analysis. Masters thesis, Universiti Malaysia Sarawak.
Lau, See Hung (2015) Development of a data-driven fuzzy system for evaluating ultimate tendon stress of externally prestressed beams. PhD thesis, Universiti Malaysia Sarawak, (UNIMAS).
Marini, Sawawi (2015) Scission of electrospun polymer fibres by ultrasonication. PhD thesis, Universiti Malaysia Sarawak.
Md. Mizanur, Rahman (2015) Studies of jute fiber and jute cellulose reinforced polyethylene with maleic Anhydride, Nanoclay and Silica biocomposites. Masters thesis, Universiti Malaysia Sarawak.
Mohammad Nurul, Hoque (2015) Development and analysis of dynamic property and vibration serviceability for composite concrete floor. PhD thesis, Universiti Malaysia Sarawak.
Muhammad Abdul Syahid, Bin Saari (2015) A STUDY ON THE BEHAVIOUR OF FRESH SELF-COMPACTING CONCRETE. Masters thesis, UNIMAS.
Nafisa, Tamanna (2015) Characterization of Pozzolanic Properties of Waste Glass as Partial Replacement of Cement. Masters thesis, University Malaysia Sarawak, UNIMAS.
Salim Ahmad, Jayousi (2015) Improving on board integrated circuits testing using one shared test access port and single bidirectional test data line. PhD thesis, Universiti Malaysia Sarawak, (UNIMAS).
Salmiah, Abdul Hamid (2015) Road signs : geosemiotics and human mobility. PhD thesis, Universiti Malaysia Sarawak, (UNIMAS).
Universiti Malaysia Sarawak, Undergraduate Studies (2015) Transcript 2015, WK01 - Bachelor of Engineering with Honours (Civil Engineering) - Faculty of Engineering. [Transcript] (Unpublished)
Universiti Malaysia Sarawak, Undergraduate Studies (2015) Transcript 2015, WK03 - Bachelor of Chemical Engineering with Honours - Faculty of Engineering. [Transcript] (Unpublished)
Universiti Malaysia Sarawak, Undergraduate Studies (2015) Transcript 2015, WK18 - Bachelor of Mechanical and Manufacturing Engineering - Faculty of Engineering. [Transcript] (Unpublished)
Universiti Malaysia Sarawak, Undergraduate Studies (2015) Transcript 2015, WK19 - Bachelor of Engineering (Honours) Electronic (Telecommunication) - Faculty of Engineering. [Transcript] (Unpublished)
Universiti Malaysia Sarawak, Undergraduate Studies (2015) Transcript 2015, WK20 - Bachelor of Engineering (Honours) Electronic (Computer) - Faculty of Engineering. [Transcript] (Unpublished)
Bong, Charles Hin Joo (2015) Sedimentation Monitoring and Modelling in Open Storm Sewer – A Case Study in 2 Kuching City, Malaysia. [Working Paper]
