Items where Division is "Academic Faculties, Institutes and Centres > Faculty of Engineering
Faculties, Institutes, Centres > Faculty of Engineering" and Year is 2013

D.Y.S., Mah and Kelvin, K.K, Kuok (2013) Field Investigation on Anthropogenic Impacted Lowland Riparian Zones. Journal of Water Resource and Protection, 5. pp. 259-265.

A. Q., Jakhrani and A. R. H., Rigit and S. A., Kamboh and W. H., Kong and K. A., Samo (2013) Assessment of Tidal Energy Resources from Tidal Streams in Sarawak Coastline. ENCON 2013.

A. Rahman, N. and Narawi, A.F. and Atan, M. F. and Othman, A.K. and Zen, H. and M.Basri, H. and Abdullah, A.S. and Ibrahim, M.D (2013) Feasibility Study Of Sustainable Pellet-Power Generation For Sarawak Isolated Areas. In: International Festival of Science, Technology, Engineering and Mathematics, Asia Pacific Regional Conference on Solar and Hybrid Technologies, 30 Sep - 1 Oct 2013, UNIMAS.

A.Rahman, N. and Ruduan, A.H. and Atan, M. F. and Othman, A.K. and Zen, H. and M.Basri, H. and Abdullah, A.S. and Ibrahim, M.D (2013) Sustainable Pelletization Of MetroxylonSagu Plantation. In: International Festival of Science, Technology, Engineering and Mathematics, Asia Pacific Regional Conference on Solar and Hybrid Technologies, 30 Sep - 1 Oct 2013, UNIMAS.

Abdul Qayoom, Jakhrani (2013) Performance Modeling And Size Optimization Of A Standalone Photovoltaic System. PhD thesis, University Malaysia Sarawak.

Abdul Qayoom, Jakhrani and Othman, A.K. and Andrew Ragai, Henry Rigit and Saleem, Raza Samo and Shakeel Ahmed, Kamboh (2013) Sensitivity Analysis of a Standalone Photovoltaic System Model Parameters. Journal of Applied Sciences, 13 (2). pp. 220-231. ISSN 1812-5654

Abu Saleh, Ahmed and E., Taharah and R., Rahman and S., Hamdan and H.H., Masjuki (2013) Biodiesel From Waste Palm Oil and Chicken Fats as an Alternative Fuel for Diesel Engine. ENCON 2013.

Afdal Haziq, Mohammad Salehe (2013) SWMM modeling of water sensitive urban design : Dry detention pond for residential estate. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Ahmad Adzlan, Fadzli Khairi and M. I., Shahidul and Syed Tarmizi, Syed Shazali and Abdullah, Yassin and Mohd. Azrin, Mohd Said and Hishammudin, Afifi Huspi and C. H., Ting (2013) Investigation on Water Consumption Pattern in Traditional Malaysian Kampung: An Insight Study on Water and Environmental Issues. ENCON 2013.

Ahmad Shahir, Jamaluddin and Abdullah, Yassin (2013) Analysis of Laser Sintered Materials Using Finite Element Method. Sains Malaysiana, 42 (12). pp. 1727-1733. ISSN 0126-6039

Ahmed, Musse Mohamud and Soo, Lian (2013) Novel Automated Fault Isolation System on Low Voltage Distribution Automation System. In: 2013 UKSim 15th International Conference on Computer Modelling and Simulation, 10-12 April 2013, Cambridge, UK.

Al-Khalid, Hj Othman and Mahmood, Adnan and Hushairi, Zen (2013) Vertical Handover Decision Processes for Fourth Generation Heterogeneous Wireless Networks. Asian Journal of Applied Sciences, 1 (5). pp. 229-235. ISSN 2321 – 0893

Alynah, Mail (2013) The Performance Of Water Filter Developed Using Commercial Activated Carbon Synthesized From Coconut Shell Remediating Low Quality Drinking Water At Rural Area. [Final Year Project Report] (Unpublished)

Amir Azam, Khan (2013) 6th International Engineering Conference (ENCON 2013). RPS. ISBN 978-981-07-6059-5

Andrew Munot, Magdalene and Ibrahim, R.N. (2013) Remanufacturing Process And Its Challenges. Journal of Mechanical Engineering and Sciences (JMES), 4. pp. 488-495. ISSN 2231-8380

Andrew Ragai, Henry Rigit and Kamran, Ahmed Samo and Azhaili, Baharun (2013) Mapping of tidal stream energy resources in the coastline of sarawak. In: 9th International Unimas Stem Engineering Conference, ENCON 2016, 26 October 2016 through 28 October 2016, Riverside Majestic Hotel Kuching, Sarawak; Malaysia;.

Angelina Eno, John Sikos (2013) Feasibility Study Of Using Ethanol And Petrol Blends In Malaysia. [Final Year Project Report] (Unpublished)

Asrani, Lit (2013) ARM7 Educational board. LAP LAMBERT Academic Publishing. ISBN 978-3-659-29065-7

Asrani, Lit and Siti Kudnie, Sahari and R., Spawi and Shamsiah, Suhaili and Dayang Nur Salmi Dharmiza, Awang Salleh and Ana Sakura, Zainal Abidin and A. F., Hassan (2013) Power Optimization for Mesh Network-on-Chip Architecture: Multilevel Network Partitioning Approach. In: EnCon 2013, 6th Engineering Conference "Energy and Environment", 2-4 July 2013, Kuching Sarawak.

Atan, M. F. (2013) Study on the Potential of Utilizing the Agricultural Waste as Biosorbent for Heavy Metal Ions. ENCON 2013.

Beatrice Christianus, Bidaun (2013) Application of mathematical modeling in rainfall forecast : a case study of Sungai Sarawak basin. Masters thesis, Universiti Malaysia Sarawak, UNIMAS.

Bohari, N. and Abidin, W.A.W.Z and Salleh, D.N.S.A and Anyi, M. (2013) Mapping of Hydro Power Energy Potential for Energy Intervention Solution in Malaysia. ENCON 2013.

Bong, Charles Hin Joo and Tze, Liang Lau and Aminuddin, Ab Ghani (2013) Sediment size and deposition characteristics in Malaysian urban concrete drains – a case study of Kuching City. Urban Water Journal, 11 (1). pp. 74-89. ISSN 1744-9006

Bong, Charles Hin Joo and Tze, Liang Lau and Aminuddin, Ab Ghani (2013) Hydraulics characteristics of tipping sediment flushing gate. Water Science & Technology, 68 (11). pp. 2397-2406. ISSN 1996-9732

Bong, Charles Hin Joo and Tze, Liang Lau and Aminuddin, Bin Ab Ghani (2013) Sediment Flushing using Tipping Flush Gate in an Open Storm Concrete Drain – A Case Study in Nibong Tebal, Penang, Malaysia. In: Proceedings of 2013 IAHR World Congress, September 2013, Chengdu, China.

Bong, Charles Hin Joo and Tze, Liang Lau and Aminuddin, Bin Ab Ghani (2013) Verification of equations for incipient motion studies for a rigid rectangular channel. Water Science & Technology, 67 (2). pp. 395-403. ISSN 1996-9732

Chai, N.P and W. A. W. Z., Abidin and W. H. W., Ibrahim and K., Hong Ping (2013) Energy Efficient Approach Through Intelligent Transportation System: A Review. In: 6th International Engineering Conference, Energy and Environment (ENCON 2013, 1-4 July 2013, Kuching, Sarawak.

Chai, WWS and Teo, DCL and Ng, CK (2013) Mechanical properties of concrete produced from waste oil palm shell (OPS) coated with PolyVinyl Alcohol (PVA) as aggregates. In: Sustainable Engineering Society Conference.

Chan, Ron Aldrino and Ron, Buking and Chai, Sin Lei (2013) Investigating the Effect of Oil Palm Fiber as Filler Material in HMA Mix Design. ENCON 2013.

Chin, Ying Teh and Tay, Kai Meng and Chee, Peng Lim (2013) Interval-based and fuzzy set-based approaches to modeling of fuzzy inference systems with the local monotonicity property. 2013 IEEE International Conference on Fuzzy Systems (FUZZ). ISSN 1098-7584 (Print)

Christopher J., Boniface and Mohammad Shahril, B. Osman and Syed Tarmizi, Syed Shazalic (2013) Indoor Air Quality in UNIMAS Detar Putra Convocation Hall. ENCON 2013.

Deny, Nerei (2013) Sustainable Pelletisation of Buah Engkabang or Shorea Macrophylla Biomass Wastes as Fuel for Rural Sarawak". [Final Year Project Report] (Unpublished)

Ding, Chang Wei (2013) Investigation of new materials and techniques for electromagnetic waves absorption. [Final Year Project Report] (Unpublished)

Elammaran, Jayamani and Sinin, Hamdan (2013) Sound Absorption Coefficients Natural Fibre Reinforced Composites. Advanced Materials Research, 701. pp. 53-58. ISSN 1662-8985

Elammaran, Jayamani and Sinin, Hamdan and Nurizahusna, binti Suid (2013) Experimental determination of Sound Absorption Coefficients of Four types of Malaysian Wood. Applied Mechanics and Materials, 315. pp. 577-581. ISSN 1662-7482

FIOUNA, DOK WAN (2013) PRETREATMENT OF LIGNOCELLULOSIC BIOMASS (EMPTY FRUIT BUNCH) BY USING IONIC LIQUIDS AS SOLVENTS. [Final Year Project Report] (Unpublished)

Faculty of, Engineering (2013) Self-assessment report : Civil Engineering Department. [Report] (Unpublished)

G., Hussain and A., Hameed and J. G., Hetherington and A. Q., Malik and K., Sanaullah (2013) Analytical Performance Study Of Explosively Formed Projectiles. Journal of Applied Mechanics and Technical Physics, 54 (1). pp. 10-20. ISSN 0021-8944

Hayati, Abdullah and Arman, Ariffin and Mohammad Yusri, Hassan (2013) Exhaust Gas-Superstructure Interactions Onboard Ships with Side Exhaust. ENCON 2013.

Hii, Yik Ming (2013) Some properties comparison between biodisesel production from crude palm oil (CPO) and olive oil and their blendings through conventional and microwave transesterification methods. [Final Year Project Report] (Unpublished)

Husin, M.H. and Leong, S.Y. and Sabri, M.F.M. (2013) Built in self test for RAM using VHDL. IEEE Colloquium on Humanities, Science and Engineering (CHUSER), 2012. ISSN ISBN: 978-1-4673-4617-7

Ibrahim, M.D and Chew, C.K. and Othman, A.K. and Zen, H. (2013) U-shaped and Conventional HDD Designs Numerical Characteristics. In: International Festival of Science, Technology, Engineering and Mathematics, Asia Pacific Regional Conference on Solar and Hybrid Technologies, 30 Sep - 1 Oct 2013, UNIMAS.

Idawati, Ismail and Susan A., Bernal and John L., Provis and Sinin, Hamdan and Jannie S. J., van Deventer (2013) Drying-induced changes in the structure of alkali-activated pastes. Journal of Materials Science, 48 (9). pp. 3566-3577. ISSN 1573-4803

Idawati, Ismail and Susan A., Bernal and Provis, John L. and Sinin, Hamdan and Deventer, Jannie S. J. van (2013) Microstructural changes in alkali activated fly ash/slag geopolymers with sulfate exposure. Materials and Structures, 46 (3). pp. 361-373. ISSN 1871-6873

Islam, M.S. and Hamdan, S. and Rusop, M. and Rahman, M.R. (2013) Thermal Stability and Decay Resistance Properties of Tropical Wood Polymer Nanocomposites (WPNC). Advanced Materials Research, 667. pp. 482-489.

J. S., Pau and K. K., Kee and William, K. S Pao (2013) A Modified Fanger’s Model for Malaysia Climate. ENCON 2013.

Jee, T.L and Tay, K.M and Ng, CK (2013) A new fuzzy criterion-referenced assessment with a fuzzy rule selection technique and a monotonicity-preserving similarity reasoning scheme. Journal of Intelligent and Fuzzy Systems, 24 (2). pp. 261-279. ISSN 1875-8967 (Online)

Jee, Tze Ling (2013) Similarity reasoning-driven evolutionary fuzzy system for monotonic-preserving models. Masters thesis, Universiti Malaysia Sarawak, (UNIMAS).

Kai, Meng Tay and Tze, Ling Jee and Lie, Meng Pang and Chee, Peng Lim (2013) A new online updating framework for constructing monotonicity-preserving Fuzzy Inference Systems. In: 2013 IEEE International Conference on Fuzzy Systems, FUZZ-IEEE 2013;, 7 July 2013 through 10 July 2013;, Hyderabad; India.

Kam, Yat Seng (2013) Fabrication Of Multi-Functional Magnetic Adsorbent For Removal Of Dyes From Aqueous Solution. [Final Year Project Report] (Unpublished)

Karim, Abdul Razak Abdul and Quenneville, Pierre and M.Sa‘don, Norazzlina and Ingham, Jason (2013) Assessment Guidelines Of Wall-Diaphragm Connections For Masonry Buildings. In: Proceedings of the New Developments in Structural Engineering and Construction. New Developments in Structural Engineering and Construction, 2 . Research Publishing Services, pp. 1019-1024. ISBN 978-981-07-5354-2

Khan, A. and Sanaullah, K. and Ul Haq, N. (2013) Development of a Sensor to Detect Condensation of Super-Sonic Steam. Advanced Materials Research, 650. pp. 482-487.

Khan, A.A and Rigit, A.R.H. and Bong, D.B.L (2013) Phase Change and Corrosion Effect on the Performance of a High Voltage Transmission Conductor. ENCON 2013.

Kho Ching Tee, Elizabeth and Alexander, Hölke and Steven John, Pilkington and Deb Kumar, Pal and Ng, Liang Yew and Wan Azlan, Bin Wan Zainal Abidin and Marina, Antoniou and Florin, Udrea (2013) Methods to Suppress Earlier Leakage in 200V Superjunction LIGBT on Partial SOI. ENCON 2013.

Kiew, K. S. and S., Hamdan and Md. R., Rahman (2013) Contribution of Chicken Feather Fiber to the Dielectric Properties of Unsaturated Polyester Matrix Composites. ENCON 2013.

Kok, Chin Chai and Tay, Kai Meng and Chee, Peng Lim (2013) A new dempster-shafer theory-based method with fuzzy targets for fuzzy sets ranking. In: IEEE International Conference on Fuzzy Systems, 7 July 2013 through 10 July 2013, Hyderabad; India.

Kuryati, Kipli and Abbas, Z. Kouzani (2013) An algorithm for determination of rank and degree of contribution of sMRI volumetric features in depression detection. In: 2013 35th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 3 July 2013 through 7 July 2013, Osaka; Japan.

Kuryati, Kipli and Abbas, Z. Kouzani and Williams, Lana J. (2013) Towards automated detection of depression from brain structural magnetic resonance images. Neuroradiology, 55 (5). pp. 567-584. ISSN 0028-3940

Kwong, Siong Kiew and Md. Rezaur, Rahman and Sinin, Hamdan and Zainal Abidin, Talibb (2013) Maleic anhydride modified unsaturated polyester composites reinforced with chicken feather fiber: Dielectric and morphological study. World Applied Sciences Journal, 25 (6). pp. 899-907. ISSN 1818-4952

Laili, M. S. and Z. N., Zakaria and A. Z., Abdullah and N. A., Rahman (2013) Modelling and Simulation of Microturbine for a Distribution System Network with Active Filter. ENCON 2013.

Lawan, S. M. and Abidin, W. A. W. Z. and Chai, W.Y and Baharun, A. and Masri, T. (2013) Recent Progress and Development of Wind Energy Potential in Malaysia: A Review. World Applied Sciences Journal, 28 (9). pp. 1222-1232. ISSN 1818-4952

Lawan, S.M and Abidin, W.A.W.Z and Chai, W.Y and Baharun, A. and Masri, T. (2013) Reviewing Wind Speed and Energy Distribution in Malaysia. European Academic Research, 1 (8). ISSN 286-4822

Lawan, S.M and Abidin, W.A.W.Z and Chai, W.Y and Baharun, A. and Masri, T. (2013) The Status Of Wind Resource Assessment(Wra) Techniques, Wind Energy Potential and Utilisation In Malaysia and Other Countries. ARPN Journal of Engineering and Applied Sciences, 8 (12).

Lee, Sharon Fung Choo (2013) Application of horizontal slice method on geosynthetics reinforced slope. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Lee, Shyue Leong (2013) Engineering behavior of soil treated by chemical and electrokinetics. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Lim, Hung Ling (2013) Seismic performance of low-rise precast concrete structure with different types of beam-column connections using nonlinear static pushover analysis. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Ling,, I. H and Teo,, D.C.L. (2013) EPS RHA concrete bricks - A new building material. Jordan Journal of Civil Engineering, 7 (4). pp. 361-370. ISSN 1993-0461

Lu, Michelle (2013) Optimal under-frequency load shedding (UFLS) scheme using evolutionary programming technique. Masters thesis, Universiti Malaysia Sarawak, (UNIMAS).

Lydiana, Stephen (2013) Utilization Of Cassava Peel To Produce Green Adsorbent For Copper (Ii) Ion And Congo Red Dye Removal From Aqueous Environment. [Final Year Project Report] (Unpublished)

M. S. M.`, Aras and A. S., Mohd Nor and S. S., Abdullah and Rashid, M. Z. A. and Annisa, Jamali (2013) Development of Subsea Altimeter Sensor System (SASS) Using Portable Sonar Sensor Fish Finder Alarm for Unmanned Underwater Vehicles. International Journal on Recent Trends in Engineering & Technology, 8 (2). pp. 110-115. ISSN 2158-5563

Magdalene, Andrew-Munot and Raafat, N. Ibrahim (2013) Development and analysis of mathematical and simulation models of decision-making tools for remanufacturing. Production Planning & Control, 24 (12). pp. 1081-1100. ISSN 0953-7287

Mahmood, Adnan and Hushairi, Zen and Al-Khalid, Othman (2013) A survey of vertical handover decision algorithms in fourth generation heterogeneous wireless networks. World Applied Sciences Journal, 28 (5). pp. 629-635. ISSN 1818-4952

Marini, Sawawi and Ting-Yi, Wang and Nisbet, David R and Simon, George P (2013) Scission of electrospun polymer fibres by ultrasonication. Polymer, 54 (16). pp. 4237-4252. ISSN 0032-3861

Marlina, Marzuki (2013) Gas-liquid two-phase flow pattern determination for vertical microchannel. [Final Year Project Report] (Unpublished)

Masra, S.M.W. and Pang, P.K. and Muhammad, M.S. and Kipli, K. (2013) Application of Particle Swarm Optimization in Histogram Equalization for image enhancement. 2012 IEEE Colloquium on Humanities, Science and Engineering (CHUSER). ISSN Print ISBN: 978-1-4673-4615-3

Md. Rezaur, Rahman and Bong, David B L and Lee, T.Z (2013) Analysis of thumbprint recognition in different bit levels. 2012 International Conference on Advanced Computer Science Applications and Technologies. pp. 192-198. ISSN ISBN: 978-1-4673-5832-3

Md. Rezaur, Rahman and Josephine, Chang Hui Lai and Sinin, Hamdan and Abu Saleh, Ahmed and Rubiyah, Baini and Shanti Faridah, Saleh (2013) Combined Styrene/MMA/Nanoclay Cross-linker Effect on Wood-Polymer Composites (WPCs). BioResources, 8 (3). pp. 4227-4237. ISSN 1930-2126

Mohamad Hardyman, Barawi and Yet, Yong Seng (2013) Evaluation of resource creations accuracy by using sentiment analysis. Procedia - Social and Behavioral Sciences, 97. pp. 522-527. ISSN 1877-0428

Mohammad, Abdul Mannan and Wong, L. L. and Asrah, H. and Muhammad Ekhlasur, Rahman (2013) Effects of Aggressive Ammonium Nitrate on Durability Properties of Concrete using Sandstone and Granite Aggregates. World Academy of Science, Engineering and Technology, 73. pp. 1107-1111. ISSN 1307-6892

Mohammad Omar, Abdullah and Lim, Pai Yii and Ervina, Junaidi and Ghazali, Tambi and Mohd Asrul, Mustapha (2013) Electricity cost saving comparison due to tariff change and ice thermal storage (ITS) usage based on a hybrid centrifugal-ITS system for buildings : A university district cooling perspective. Energy and Buildings, 67. pp. 70-78. ISSN 0378-7788

Mohd Danial, Bin Ibrahim and Mohd Shahril, Bin Osman and Miyanaga, Norifumi and Amir Azam, Khan (2013) Macro-surface Modification through Exploitation of Rivets and Dimples –Numerical and Experimental. In: Proceedings of the 5th World Tribology Congress 2013, 8-13 September 2013, Torino, Italy.

Mohd Hafiez Izzwan, Bin Saad and Mohd Hafizi, Bin Ahmad and Yanuar Zulardiansyah, Arief and Hussein, Bin Ahmad and Mohamed Afendi, Bin Mohamed Piah (2013) Influence of Organo-Montmorillonite on Electrical Tree Parameters in Epoxy Resin Under Ac Ramp Voltage. Jurnal Teknologi, 64 (4). pp. 103-107. ISSN 2180-3722

Mohd Nazim, Jambli and A.M., Farha Anati and Halikul, Lenando and Johari, Abdullah and M.S, Sinarwati (2013) Performance Evaluation of CTP Routing Protocol for Mobile Wireless Sensor Network. pp. 1-5.

Mohd Saiful, Islam and Hamdan, S. and Rusop, M. and Rahman, M.R. (2013) Mechanical and Morphological Properties of Tropical Wood Polymer Nanocomposite (WPNC). In: International Conference on Nanoscience and Nanotechnology 2011, NANO-SciTech 2011, 2 March 2011 through 3 March 2011, Shah Alam, Selangor; Malaysia.

Mohd Saufee, Muhammad and Thoo, Y. W. and Masra, S.M.W. (2013) Sound navigation aid system for the vision impaired. IEEE Colloquium on Humanities, Science and Engineering (CHUSER), 2012. ISSN ISBN: 978-1-4673-4617-7

Muhammad, Ali and Hushairi, Zen and Faisal, Rahman (2013) Intelligent Energy Management Scheme for Home Area Networks Using Fair Emergency Demand Response Programs (FEDRP). ENCON 2013.

Muhammad, jawad and Hushairi, Zen and Faisal, Rahman and Muhammad, Ali and Saqib, Salahuddin and Rahat, Nasim and Arshad, Mehmood (2013) Network Analysis of Power Transmission System Topology. ENCON 2013.

Nor Diana Ruszaini, Mohd Zin and Ir Asnawi, Mohd Busrah (2013) Technical Feasibility Assessment for Led Street Lightin. ENCON 2013.

Norilhamiah, Yahya and Ahmad Najie, Zulkifli and Suhaini, Mamat and Law, Jeng Yeh (2013) Performance of Electrocoagulation Process in Removing Cod from Various Types of Industrial Wastewater. ENCON 2013.

Norsuzailina, Mohamed Sutan and Ibrahim, Yakub and Hebron, Jau (2013) Physical and Mechanical Properties of Industrial Waste Modified Mortar. [Working Paper]

Norsuzailina, Sutan and Ibrahim, Yakub and Kiong, C. S. (2013) Characterization of calcium silicate hydrate and calcium hydroxide in nanosilica binder composites. Nano Studies, 8. pp. 57-62. ISSN 1987 − 8826

Norsuzailina, Mohamed Sutan and Sinin, Hamdan (2013) Efflorescence Phenomenon on Concrete Structures. Advanced Materials Research, 626. pp. 747-750.

Nur Syakina, Jamali (2013) Phytoremediation of Palm Oil Mill Effluent Using E. Crassipes. [Final Year Project Report] (Unpublished)

Ong, Yong Ching (2013) Phytoremediation Of Palm Oil Mill Effluent (Pome) Using P. Stratiotes. [Final Year Project Report] (Unpublished)

Othman, A.K. and Zen, H. and A. Rahman, N. and Ibrahim, M.D and M. Basri, Hazrul and Lias, K. (2013) Renewable Energy Roadmap And Employability In Energy Sector For Sarawak Corridor Of Renewable Energy (SCORE). In: International Festival of Science, Technology, Engineering and Mathematics, Asia Pacific Regional Conference on Solar and Hybrid Technologies,, 30 Sep - 1 Oct 2013, UNIMAS.

Othman, A.K. and Zen, H. and Ibrahim, M.D (2013) Energy Optimization for Rural ICT Telecentre. In: International Festival of Science, Technology, Engineering and Mathematics, Asia Pacific Regional Conference on Solar and Hybrid Technologies, 30 Sep - 1 Oct 2013, UNIMAS.

Perowansa, Parukaa and Mohd Kamal, Mohd Shah and Md Abdul, Mannan (2013) Influence of axial and oblique impact loads on crush response properties of square tube structures made with FRP pultruded composites. In: 2013 1st Malaysian International Tribology Conference, MITC 2013;, 18 November 2013 through 20 November 2013, Kota Kinabalu, Sabah; Malaysia.

Perrin, R and Sinin, Hamdan and Halkon, B and Swallowe, G.M (2013) Studies with a small gamelan gong. In: Annual Spring Conference, Acoustics 2013;, 13 May 2013 through 13 May 2013, Nottingham; United Kingdom.

Prashobh, Karunakaran and Mohammad Shahril, Osman (2013) A study into the feasibility of consumers triggering factory robots to start production over the internet to optimize the current purchasing system. Journal of Manufacturing Engineering, 8 (2). pp. 71-74. ISSN 0022-1817

Rajaee, N. and Junaidi, E. and Taib, S.N.L. and Salleh, S.F. and Munot, M.A. (2013) Issues and Challenges in Implementing Outcome Based Education in Engineering Education. International Journal for Innovation Education and Research, 1 (4). pp. 1-9.

Rosemina, Liboma (2013) Commercial Grade Charcoal Briquette Production from Forestry Biomass Waste". [Final Year Project Report] (Unpublished)

S. M., Lawan and W. A. W. Z., Abidin and A., Baharun and T., Masri and W. Y., Chai (2013) Modeling of Wind Energy Potential for Sarawak: Conceptual Design. ENCON 2013.

S. T., Syed Shazali and M. S., Osman and H. M., Johan and A., Yassin and M. I., Shahidul and M., Andrew-Munot and M. A., Mohd Said (2013) Effects of Automated Manufacturing System Towards Workforce’s Behaviours. ENCON 2013.

S. Zaharah, Binti Ibrahim and M. Shahril, Bin Osman and Miyanaga, Norifumi and Amir Azam, Khan and Mohd Danial, Bin Ibrahim (2013) Application of Surface Modification for Airplane Winglets. In: Proceedings of the 40th Leeds-Lyon Symposium on Tribology & Tribochemistry Forum 2013, 4-6 September 2013, Lyon, France.

Sahdi, F. and Gaudin, C. and White, D.J. (2013) Strength properties of ultra-soft kaolin. Canadian Geotechnical Journal. pp. 420-431.

Sahrani, S. and Kuroda, M. (2013) FDTD Analysis with Overset Grid Generation Method for Rotating Body and Evaluation of Its Accuracy. IEICE TRANSACTIONS on Electronics, E96-C (1). pp. 35-41. ISSN 1745-1353 (online)

Saratha, Sathasivam and Ng, Pei Fen and Muraly, Velavan (2013) Application of Higher Order Hopfield Network. ENCON 2015.

Saravana, Kannan Thangavelu and Abu Saleh, Ahmed and Ani, F.N. (2013) Energy Efficient Microwave Irradiation of Sago Bark Waste (SBW) for Bioethanol Production. Advanced Materials Research, 701. pp. 249-253. ISSN 1662-8985

See, Hung Lau and Tay, Kai Meng and Chee, Khoon Ng (2013) Monotonicity preserving SIRMs-connected fuzzy inference systems with a new monotonicity index: Learning and tuning. Fuzzy Systems (FUZZ), 2013 IEEE International Conference. pp. 1-7. ISSN 1098-7584

Shafrida, Sahrani and Tatsuya, Akata and Michiko, Kuroda (2013) FDTD method for the analysis of the EM field from a moving source. Asia-Pacific Microwave Conference Proceedings. pp. 288-290.

Shahidul, M. I. and M. S., Osman and S. T., Syed Shazali and A., Yassin and C. H., Tinga and A. H., Hishamuddin and S. M, Azrin and M. A. F. K., Adzlan (2013) Measuring Production Capacity Utilization and Its Impact on Manufacturing Performance and Environment. ENCON 2013.

Shahrul Niza, Mokhatar and Redzuan, Abdullah and Ahmad Kueh, Beng Hong (2013) Computational impact responses of reinforced concrete slabs. Computers and Concrete, 12 (1). pp. 37-51. ISSN 1598-8198

Sharifah Nurul Fazilla, binti Ghazali (2013) Study on the potential of utilizing rice husk as biosorbent for humic substance. [Final Year Project Report] (Unpublished)

Sharina, Segri (2013) Study on human working behaviour in automated and manual manufacturing system. [Final Year Project Report] (Unpublished)

Sherena, bt Sar-ee (2013) The investigation of vital physical and combustion properties for a range of blends of ethanoland gasoline. [Final Year Project Report] (Unpublished)

Sim, Nee Ting and Wei, Kiet Hu (2013) Comparative study of structural steel and reinforced concrete construction methods : a Malaysian case study. Universiti Malaysia Sarawak.

Sinin, Hamdan and Md. Saiful, Islam and Abu Saleh, Ahmed and Md. Rezaur, Rahman and Mohamad Rusop, Mahmood (2013) Study on thermal and biodegradation resistance of tropical wood material composites. Journal of Applied Polymer Science, 128 (3). pp. 1842-1847. ISSN 0021-8995

Siti Noor Linda, Taib and Lau, See Hung and Prabir, Kumar Kolay (2013) Laboratory measurement of displacement on shallow foundation in uniform sand using particle image velocimetry technique. Jurnal Teknologi (Sciences and Engineering), 61 (3). pp. 53-61. ISSN ISSN:0127-9696

Su Shiung, Lam and Alan D., Russell and Howard A., Chase (2013) Recycling of Waste Automotive Engine Oil into a Potential Liquid Fuel via Microwave Pyrolysis. ENCON 2013.

Suzanna, Ridzuan Aw and Mohd Muzafar, Ismail and Amar Faiz, Zainal Abidin and Nur Anis, Nordin and Seri Mastura, Mustaza and Ezreen Farina, Shair and Asrani, Lit and Arfah Syahida, Mohd Noor and Nur Latif Azyze, Mohd Shaari Azyze and Ahmad Rijal, Abdul Rahman and Ili Najaa, Aimi and Safirin, Mohd Karis and Amira Sarayati, Ahmad Dahlan (2013) A Preliminary Study on Solving Knight’s Tour Problem Using Binary Magnetic Optimization Algorithm. In: IGCESH 2013 (4th International Graduate Conference on Engineering, Science and Humanities), 16th to 17th April 2013, Johor Bahru, Johor, Malaysia.

Syed Almunir, Bin Mohd Zarak and Adam, J.H. (2013) A Study on the Relationship between Climate Change and Peak Discharge in Sarawak River Basin. UNIMAS e-Journal of Civil Engineering, 4 (3). pp. 23-28. ISSN 1985-3874

T. Y. E., John and W. A. W. Z., Abidin and T., Masri and A., Baharun (2013) Thermal Performance of Low-Cost House with Retrofit Solutions. ENCON 2013.

Tamanna, N. and Mohamed Sutan, N. and Lee, D.T.C and Yakub, I. (2013) Utilization of Waste Glass in Concrete. ENCON 2013.

Tamrin, K. F. and Nukman, Y. and Zakariyah, S.S. (2013) Laser Lap Joining of Dissimilar Materials: A Review of Factors Affecting Joint Strength. Materials and Manufacturing Processes, 28. pp. 857-871. ISSN 1042-6914

Tay, K.M and Chian, Haur Jong and Chee, Peng Lim (2013) Application of the fuzzy failure mode and effect analysis methodology to edible bird nest processing. Computers and electronics in agriculture, 96. pp. 90-108. ISSN 0168-1699

Tay, Kai Meng and Liew, Meng Pang and Tze, Ling Jee (2013) A New Framework With Similarity Reasoning and Monotone Fuzzy Rule Relabeling for Fuzzy Inference Systems. IEEE International Conference on Fuzzy Systems (FUZZ), 2013. ISSN 1098-7584

Ting, C.H and M. I., Shahidul and S. T., Syed Shazali and A., Yassin (2013) Measuring Contextual Impact of Maintenance on Machinery Capacity Utilization and Environment. ENCON 2013.

Ting, K.C and Tan, J.Y.B. and Lee, T.Z and Bong, David B L (2013) Face recognition by neural network using bit-planes extracted from an image. Journal of Information & Computational Science, 10 (16). pp. 1-9. ISSN 1548-7741

Universiti Malaysia Sarawak, Faculty of Engineering (2013) Annual Report 2013 : Faculty of Engineering. [Report]

Universiti Malaysia Sarawak, Faculty of Engineering (2013) FENG Research Bulletin – volume 6, December 2013. [Magazine and Newsletter]

W. J., Fan (2013) Interband and Intersubband Optical Transition Matrix Elements of Ge/Gesisn Quantum Well. ENCON 2013.

Wahsh, S. and Samir, E. and Hasan, M. and Wael, S. (2013) Propulsion System Issues in Hybrid Electric Vehicle. ENCON 2013.

Wong, Leh Feng (2013) Conversion and characterization of biodiesel by transesterification of olive oil. [Final Year Project Report] (Unpublished)

Wui, Lee Chang and Kai, Meng Tay and Chee, Peng Lim (2013) Enhancing an evolving tree-based text document visualization model with fuzzy c-means clustering. In: 2013 IEEE International Conference on Fuzzy Systems, FUZZ-IEEE 2013, 7 July 2013 through 10 July 2013, Hyderabad; India;.

Wui, Lee Chang and Kai, Meng Tay and Chee, Peng Lim (2013) A New Evolving Tree for Text Document Clustering and Visualization. In: A New Evolving Tree for Text Document Clustering and Visualization. Advances in Intelligent Systems and Computing . Springer International Publishing, pp. 141-151. ISBN 978-3-319-00930-8

Yakub, I. and Mohammad, M. and Yaakob, Z. (2013) Effects of Zinc Chloride Impregnation on the Characteristics of Activated Carbon Produced from Physic Nut Seed Hull. Advanced Materials Research, 626. pp. 751-755.

Yassin, A. and M. I., Shahidul and S. T., Syed Shazali and A. H., Ruduan and S. M. A., Liakbar and Al-Khalid, Othman and Hushairi, Zen and A., Baharun (2013) Optimization of Green Energy Extraction: An Application of Cross-Flow Micro-Hydro Turbine. ENCON 2013.

Yau Seng, Mah and Kelvin, K.K Kuok (2013) Field Investigation on Anthropogenic Impacted Lowland Riparian Zones. Journal of Water Resource and Protection, 5. pp. 259-265.

Yuta, Sunami and Mohd Danial, Ibrahim and Hiromu, Hashimoto (2013) Optimum design of oil lubricated thrust bearing for hard disk drive with high speed spindle motor. International Journal of Rotating Machinery, 2013 (2013). ISSN 1023-621X