Items where Division is "Academic Faculties, Institutes and Centres > Faculty of Engineering
Faculties, Institutes, Centres > Faculty of Engineering" and Year is 2016

A.R., Abdul Karim and N. M., Sa’don and J. M., Ingham (2016) Structural dynamic response of an unreinforced masonry house using non-destructive forced vibration. Journal of Earthquake Engineering, 20 (1). pp. 1-11. ISSN 1363-2469

Abba, Ibrahim (2016) Data Acquisition System for Efficient L-Band Global Positioning System Signal Reception over a Low Latitude Region. PhD thesis, UNIMAS.

Abdul Karim, Abdul Razak and M.Sa’don, Norazzlina and Ingham, Jason M. (2016) Structural Dynamic Response of an Unreinforced Masonry House using Non-Destructive Forced Vibration. Journal of Earthquake Engineering, 20 (1). pp. 1-11. ISSN 1363-2469

Afrasyab, Khan and Khairuddin, Sanaullah and M. Sobri, Takriff and Hushairi, Zen and Andrew Ragai, Henry Rigit and Ajmal, Shah and Imran Rafiq, Chughtai (2016) Numerical and experimental investigations on the physical characteristics of supersonic steam jet induced hydrodynamic instabilities. Asia-Pacific Journal of Chemical Engineering, 11 (2). pp. 271-283. ISSN 1932-2135

Afrasyab, Khan and Khairuddin, Sanaullah and M.Sobri, Takriff and Aini, Hussain and Ajmal, Shah and Imran Rafiq, Chughtai (2016) Void fraction of supersonic steam jet in subcooled water. Flow Measurement and Instrumentation, 47. pp. 35-44. ISSN 0955-5986

Ahmad Salam, Farooqi and Ariny, Demong and Khairuddin, Sanaullah and Shaharin Anwar, Sulaiman and Andrew Ragai, Henry Rigit and Shanti Faridah, Saleh and Shah Jehan, Gilliani and Afrasyab, Khan (2016) Effects of Swirl Bubble Injection on Mass Transfer and Hydrodynamics for Bubbly Flow Reactors: A Concept Paper. In: 9th International Unimas Stem Engineering Conference, ENCON 2016, 26 October 2016 through 28 October 2016, Riverside Majestic Hotel Kuching, Sarawak.

Alhaji, M.H. and Sanaullah, K. and Lim, S.-F. and Khan, A. and Hipolito, C.N. and Abdullah, M.O. and Bhawani, S.A. and Jamil, T. and UNSPECIFIED (2016) Photocatalytic treatment technology for palm oil mill effluent (POME) – A review. Process Safety and Environmental Protection, 102. pp. 673-686. ISSN 0957-5820

Ali, M. and Karuppiah, K and Salit, M.S. and Ahmed, A.S. (2016) Evaluation the discomfort level for students Polytechnic Kuching Sarawak sitting on chairs. Malaysian Journal of Public Health Medicine, 1 (Specia). pp. 36-43. ISSN 16750306

Aliff, Rahman and Shahrol, Mohamaddan (2016) Simple Arm Muscle Model for Oil Palm Harvesting Process. MATEC Web of Conferences, 87. pp. 1-4. ISSN 2261236X

Alphonsus, Ephrem Ryan and Mohammad Omar, Abdullah (2016) A review on the applications of programmable logic controllers (PLCs). Renewable and Sustainable Energy Reviews, 60. pp. 1185-1205. ISSN 1364-0321

Aneela, Sabir and Atif, Islam and Muhammad, Shafiq and Amir, Shafeeq and Muhammad Taqi, Zahid Butt and Nasir M., Ahmad and Khairuddin, Sanaullah and Tahir, Jamil (2016) Novel polymer matrix composite membrane doped with fumed silica particles for reverse osmosis desalination. Desalination, 368. pp. 159-170. ISSN 0011-9164

Aneela, Sabir and Wail, Falath and Jacob, Karl I. and Muhammad, Shafiq and Muhammad Azeem, Munawar and Atif, Islam and Nafisa, Gull and Muhammad Taqi, Zahid Butt and Khairuddin, Sanaullah and Tahir, Jamil (2016) Hyperbranched polyethyleneimine induced polycationic membranes for improved fouling resistance and high RO performance. European Polymer Journal, 85. pp. 266-278. ISSN 0014-3057

Annie, Joseph and Takaomi, Tokumoto and Seiichi, Ozawa (2016) Online feature extraction based on accelerated kernel principal component analysis for data stream. Evolving Systems, 7. pp. 15-27. ISSN 1868-6486

Anr, R. and Saleh, A.A. and Islam, M.S. and Hamdan, S. and Maleque, M.A (2016) Biodiesel Production from Crude Jatropha Oil using a Highly Active Heterogeneous Nanocatalyst by Optimizing Transesterification Reaction Parameters. Energy and Fuels, 30 (1). pp. 334-343. ISSN 0887-0624

Asrani, Lit and Charles Luan, Sebastian Itap (2016) Power and Area Optimization in NoC by using Tailor Made Partitioning. LAP LAMBERT Academic Publishing. ISBN 978-3-659-90802-6

Asrani, Lit and Muhammad Irfan, Abdul Rahman and Fariza, Mahyan (2016) The Development of Image Overlay System in Biomedical Application. LAP LAMBERT Academic Publishing. ISBN 978-3659930799

Asrani, Lit and Muhammad Qaedi, Edanan (2016) Performance Optimization in Network-on-Chip : Multi Level Network Partitioning Approach. LAP LAMBERT Academic Publishing. ISBN 978-3659907456

Asrani, Lit and Muhammad Shaah Fihee, Misman and Fariza, Mahyan (2016) Real Time Face Recognition System : Principle Component Analysis Algorithm. LAP LAMBERT Academic Publishing (July 28, 2016). ISBN ‎ 978-3659923272

Ayeshamariam, A. and Saravanakkumar, D. and Kashif, M. and Sivaranjani, S. and Ravikumar, B. (2016) Analysis on the effect of ZnO on Carbon nanotube by spray pyrolysis method. Mechanics of Advanced Materials and Modern Processes, 2 (3). ISSN 2198-7874

Bello, Olalekan (2016) Utility-Based Scheduling for Wireless Network using Modified Sigmoidal Function. PhD thesis, Universiti Malaysia Sarawak.

Benachaiba, C. and Mazari, B. and Tandjaoui, M. N and Ahmed Mohamed, Ahmed Haidar (2016) Power Quality Enhancement using DVR based on Ant colony Controller. In: 2016 57th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON), 13-14 Oct. 2016, Riga, Latvia.

Bong, Charles Hin Joo and Lau, Tze Liang and Aminuddin, Ab Ghani and Chan, Ngaiweng (2016) Sediment deposit thickness and its effect on critical velocity for incipient motion. Water Science and Technology, 74 (8). pp. 1876-1884. ISSN 02731223

Bong, Charles Hin Joo and Laub, T.L. and Ghanic, A. Ab. (2016) Potential of tipping flush gate for sedimentation management in open stormwater sewer. Urban Water Journal, 13 (5). pp. 486-498. ISSN 1573-062X

Bong, Charles Hin Joo and Ngai, Weng Chan and Ku Ruhana, Ku Mahamud and Mohamad Zaini, Bin Karim and Lai, Kuan Lee (2016) Hydrological Cycle And Cities. In: Sustainable Urban Development Textbook. Water Watch Penang & Yokohama City University, pp. 95-104. ISBN 978-983-41334-3-6

Bong, Chien Chai (2016) Float and Anchorage System for In-Stream Vertical Micro Hydro Turbine. Masters thesis, Universiti Malaysia Sarawak.

Bong, David Liang Bong and Lee, Therry Z. (2016) Analysis of bit-plane images by using principal component on face and palmprint database. Pertanika Journal of Science and Technology, 24 (1). pp. 191-203. ISSN 0128-7680

Bong Hin Joo, Charles (2016) Sediment in open storm sewer and its removal. Universiti Malaysia Sarawak, (UNIMAS). ISBN 978-967-5527-98-2

Chai, Kok Chin (2016) Fuzzy Ranking Methods and Their Applications. PhD thesis, Universiti Malaysia Sarawak (UNIMAS).

Chai, Kok Chin and Tay, K.M and Lim, Chee Peng (2016) A new method to rank fuzzy numbers using Dempster–Shafer theory with fuzzy targets. Information Sciences, 346. pp. 302-317. ISSN 0020-0255

Chan, Chee Ming and Siti Farhanah, SM Johan (2016) Performance enhancement of railtrack ballast with rubber inclusions: a laboratory simulation. In: 15th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, ARC 2015: New Innovations and Sustainability, 9th - 13th November 2015, Fukuoka International Congress Center.

Chan, Chee Ming and Siti Farhanah, SM Johan (2016) SHEAR RESISTANCE IMPROVEMENT OF OIL-CONTAMINATED BALLAST LAYER WITH RUBBER SHRED INCLUSIONS. International Journal of GEOMATE, 11 (27). pp. 2723-2729. ISSN 2186-2990

Chaudhry, F. and Asif, N. and Shafqat, S.S. and Khan, A.A. and Munawar, M.A. and Khan, M.A. (2016) Efficient ecofriendly synthesis of pyrazole acryloyl analogs by amino acid catalysis. Synthetic Communications, 46 (8). pp. 701-709. ISSN 00397911

Chiang, Tay Chen and Sinin, Hamdan and Mohd Shahril, B.Osman (2016) Urea Formaldehyde Composites Reinforced with Sago Fibres Analysis by FTIR, TGA, and DSC. Advances in Materials Science and Engineering, 2016. ISSN 1687-8442

Christopher, Jantai Boniface (2016) A Study on Radian Time Series (RTS) Based Method for Calculating Cooling Load in Equatorial Climates. Masters thesis, UNIMAS.

Chung, Loong Yiin and Suzana, Yusup and Mustakimah, Mohamed and Parncheewa, Udomsap and Boonyawan, Yoosuk and Sittha, Sukkasi (2016) Stabilization of Empty Fruit Bunch derived Bio-oil using Solvents. Journal of Sustainable Development of Energy, Water and Environment Systems, 4 (1). pp. 38-47.

Dayang Salyani, Mahmod and Amir Azam, Khan and Magdalene, Andrew Munot and Glandut, N. and Labbe, Jean Claude (2016) Laser surface treatment of porous ceramic substrate for application in solid oxide fuel cells. IOP Conf. Series: Materials Science and Engineering, 146 (1). pp. 1-7. ISSN 1757-899X

Elammaran, Jayamani and Sinin, Hamdan and Pushparaj, Ezhumalai and Muhammad Khusairy, Bin Bakri (2016) Investigation On Dielectric And Sound Absorption Properties Of Banana Fibers Reinforced Epoxy Composites. Jurnal Teknologi, 78 (6-10). pp. 97-103. ISSN 2180–3722

Elammaran, Jayamani and Sinin, Hamdan and Soon, Kok Heng and Md Rezaur, Rahman and Muhammad Khusairy, Bin Bakri (2016) Acoustical, thermal, and morphological properties of zein reinforced oil palm empty fruit bunch fiber bio-composites. Journal of Applied Polymer Science, 133 (43). ISSN 0021-8995

Ervina, Junaidi and Mariattia, M. and Sinin, Hamdan (2016) Effect of Filler Loading on the Tensile Properties of Multi-walled Carbon Nanotube and Graphene Nanopowder filled Epoxy Composites. Procedia Chemistry, 19. pp. 897-905. ISSN 1876-6196

Fadzli, Mohamed Nazri and Ramadhansyah, Putra Jaya and Badorul Hisham, Abu Bakar and Raudhah, Ahmadi (2016) Fire resistance of ultra-high performance fibre reinforced concrete due to heating and cooling. MATEC Web of Conferences, 87. pp. 1-9. ISSN 2261236X

Farah Atiqah, Ali Yusup and Shirley, Rufus and Prashobh, Karunakaran and Nazreen, Junaidi and Nurul 'Izzati, Hashim (2016) Power Quality Improvement on Wind Energy System by Using STATCOM. Applied Mechanics and Materials, 833. pp. 33-40. ISSN 1662-7482

Florence, Francis Lothai (2016) A New Bit-Plane Extraction Approach for Fingerprint Recognition Using Phase-Only Correlation Function. Masters thesis, Universiti Malaysia Sarawak(UNIMAS).

Foo, K. L. and Hashim, U. and Voon, C. H. and Mohammad, Kashif and Md. Eaqub, Ali (2016) Au decorated ZnO thin film: application to DNA sensing. Microsystem Technologies, 22 (4). pp. 903-910. ISSN 1432-1858

Foo, K. L. and M., Kashif and Tan, S. J. and U., Hashim (2016) An electrochemical DNA biosensor based gold-thiolate conjugation utilizing ruthenium complex [Ru(dppz)2(qtpy)]Cl2. Microsystem Technologies, 2016. pp. 1-9. ISSN 1432-1858

Fui, Kiew Liew and Sinin, Hamdan and Md Rezaur, Rahman and Mohamad Rusop, Mahmood and Md. Mizanur, Rahman and Chang, Josephine Hui Lai and Md. Tipu, Sultan (2016) 4-Methylcatechol-treated Jute-Bamboo Hybrid Composites: Effects of pH on Thermo-Mechanical and Morphological Properties. BioResources, 11 (3). pp. 6880-6895. ISSN 1930-2126

Fujica, Anak Anggo (2016) Seni motif tatu tradisional masyarakat Iban dan Kayan-Kenyah di Sarawak. [Final Year Project Report] (Unpublished)

Gaddafi, Ismaili and Khairul Khuzaimah, Abdul Rahim and Zurina, Ismaili (2016) Strength group of Engkabang jantong as fast-growing indigenous species timber in Sarawak. Journal of Scientific Research and Development, 3 (2). pp. 28-32. ISSN 1115-7569

Hasan, Alsidqi (2016) Preface. MATEC Web of Conferences, 87. ISSN 2261236X

Hushairi, Zen and Adnan, Mahmood (2016) ICT Convergence in Internet of Things – The Birth of Smart Factories. International Journal of Computer Science and Information Security, 14 (4). pp. 93-101. ISSN 1947-5500

Hushairi, Zen and Al-Khalid, Hj Othman and Ong, Sylvia Ai Ling and Mahmood, Adnan and Bello, Olalekan (2016) A Review on Cooperative Diversity Techniques Bypassing Channel Estimation. Canadian Journal of Pure and Applied Sciences, 10 (1). pp. 3777-3783. ISSN 1920-3853

Imran, Muhammad Syukri and Baharun, Azhaili and Siti Halipah, Ibrahim and Wan Azlan, Bin Wan Zainal Abidin (2016) Renewable night cooled chill water source for energy efficient indoor radiant cooling. International Journal of Engineering Research in Africa, 26. pp. 86-98. ISSN 1663-3571

Imran S., Muhammad and Baharun, A. and Halipah S., Ibrahim and Wan A., Wan Z.B. (2016) Investigation Of Ground Temperature For Heat Sink Application In Kuching, Sarawak, Malaysia. Journal of Civil Engineering, Science and Technology, 7 (1). ISSN 2141-2634

Isa Ebtehaj and Hossein Bonakdari and Amir Hossein Zaji and Hin Charles Joo Bong and Aminuddin Ab Ghani (2016) Design of a new hybrid artificial neural network method based on decision trees for calculating the Froude number in rigid rectangular channels. Journal of Hydrology and Hydromechanics, 64 (3). pp. 252-260. ISSN 0042790X

Ismail, S. and Ahmed, A.S. and Reddy, Anr and Sinin, Hamdan (2016) Biodiesel Production from Castor Oil by Using Calcium Oxide Derived from Mud Clam Shell. Journal of Renewable Energy, 2016. ISSN 1537-744X

Juntian, Si and Yang, Gao and Abadi, Chanik (2016) Slew Control of Prolate Spinners Using Single Magnetorquer. JOURNAL OF GUIDANCE, CONTROL, AND DYNAMICS, 39 (3). pp. 715-723. ISSN 1533-3884

Kabit, M.R. and Sabihin, N.A. and Wan Ibrahim, W.H. (2016) Effectiveness Of Automated Enforcement System (Aes) In Reducing Red Light Violation (Rlv) Behaviours: A Case Study In Kuala Lumpur. Journal of Civil Engineering, Science and Technology, 7 (1). pp. 39-44. ISSN 2141-2634

Kamaruddin, A.M.N.A. and Hosokawa, A. and Furumoto, T. and Ueda, T. (2016) Cutting characteristics of binderless diamond tools in high-speed turning of Ti-6Al-4Vp: – Availability of single-crystal and nano-polycrystalline diamond. International Journal of Automation Technology, 10 (3). pp. 411-419. ISSN 18817629

Kamran Ahmed, Samo and Andrew Ragai, Henry Rigit and Baharun, Azhaili (2016) Mapping of Tidal Energy Potential based on High and Low Tides for Sabah and Sarawak. MATEC Web of Conferences, 87. ISSN 2261236X

Karunakaran, Thiruventhan and Ee, Gwendoline C.L. and Tee, Keng H. and Ismail, Intan S. and Zamakshshari, Nor H. and Peter, Waziri M. (2016) Cytotoxic prenylated xanthone and coumarin derivatives from Malaysian Mesua beccariana. Phytochemistry Letters, 17 (2016). pp. 131-134. ISSN 1874-3900

Khairul Anwar, Mohamad Said and Genevieve Gadung, George and Nurul Ain, Mohamed Alipah and Nor Zakirah, Ismail and Ramizah Liyana, Jama'In (2016) Effect of activated carbon in PSF-PEI-Ag symmetric membrane. MATEC Web of Conferences, 87. ISSN 2261236X

Khairul Anwar, Mohamad Said and Zainad, Radzi and Ibrahim, Yakub and Mohamed Afizal, Mohamed Amin (2016) Extraction And Quantitative Determination Of Ascorbic Acid From Banana Peel Musa Acuminata ‘Kepok’. IIUM Engineering Journal, 17 (1). ISSN 1511-788X

Khairul Azmy, Kamaluddin and Muhammad Syukri Imran, Abdullah and Yang, Soo Siang (2016) DEVELOPMENT OF ENERGY BENCHMARKING OF MALAYSIAN GOVERNMENT HOSPITALS AND ANALYSIS OF ENERGY SAVINGS OPPORTUNITIES. Journal of Building Performance, 7 (1). pp. 72-87. ISSN 2180-2106

Khan, A. and Sanaullah, K. and Takriff, M.S. and Zen, S. and Rigit, A.R.H. and Shah, A. and Chughtai, I.R. and Jamil, T. (2016) Pressure stresses generated due to supersonic steam jet induced hydrodynamic instabilities. Chemical Engineering Science, 146. pp. 44-63. ISSN 0009-2509

Kho, Lee Chin and Ngu, S.S. and Tan, Y. and Lim, A.O. (2016) Application of data compression technique in congested networks. Lecture Notes in Electrical Engineering, 348. pp. 235-249. ISSN 1876-1100

Kismet, Hong Ping and Sia, Andrew Chew Chie and Yong, Guang and Ng, Shi Wei and Nordiana, Rajaee (2016) Preliminary Results of Integrating Tikhonov’s Regularization in Forward-Backward Time-Stepping Technique for Object Detection. Applied Mechanics and Materials, 833. pp. 170-175. ISSN 1662-7482

Kok, Chin Chai and Chian, Haur Jong and Kai, Meng Tay and Chee, Peng Lim (2016) A perceptual computing-based method to prioritize failure modes in failure mode and effect analysis and its application to edible bird nest farming. Applied Soft Computing Journal, 49. pp. 734-747. ISSN 15684946

Kuok, Kelvin K.K and Mah, D.Y.S. and Imteaz, M.A and Kueh, S.M (2016) Comparison of future intensity duration frequency curve by considering the impact of climate change: case study for Kuching city. International Journal of River Basin Management, 14 (1). pp. 47-55. ISSN 1571-5124

Lai, Josephine Chang Hui and Md. Rezaur, Rahman and Sinin, Hamdan (2016) Polyvinyl Alcohol/Silica/Clay Composites: Effect Of Clay On Surface Morphology And Thermo-Mechanical Properties. Jurnal Teknologi, 78 (1). pp. 45-53. ISSN 2180–3722

Lai, Josephine Chang Hui. (2016) Studies on Physico-Mechanical, Thermal and Morphological Properties of Silica/Fumed Silica and Various Nanoclay Dispersed Polymer Nanocomposites. Masters thesis, UNIMAS.

Lawrence Insol, Alik and Edi Suhaimi, Bakar and Zaidon, Ashaari and Putri NurKhairunnisha, Ismail and Ronald Lian, Nuh and Gaddafi, Ismaili (2016) Bend curve characteristics of phenol formaldehyde resin treated oil palm wood (Elaeisguineensis Jacq.). Journal of Scientific Research and Development (JSRD), 2 (3). pp. 21-27. ISSN 1115-7569

Lee, Delsye Teo Ching and Lee, Tansuet (2016) The effect of aggregate condition during mixing on the mechanical properties of oil palm shell (OPS) concrete. MATEC Web of Conferences, 87. ISSN 2261236X

Lee, Therry Z. and Bong, David B L (2016) Face And Palmprint Multimodal Biometric System Based On Bit-Plane Decomposition Approach. IEEE International Conference on Consumer Electronics-Taiwan (ICCE-TW), 2016. ISSN ISBN: 978-1-5090-2073-7

Lee, Therry Z. and Bong, David Boon Liang (2016) Face And Palmprint Multimod al Biometric System Based On Bit-Plane Decomposition Approach. In: IEEE International Conference on Consumer Electronics-Taiwan (ICCE-TW), 27-29 May 2016, Nantou County, Taiwan.

Lias, K. and Buniyamin, N. and Ahmad Narihan, M.Z (2016) Specific absorption rate investigation of different EBG-M applicator structures for non-invasive hyperthermia cancer treatment procedure. IFMBE Proceedings, 56. pp. 103-106. ISSN 1680-0737

Ling, Chai Ping and Ivy Tan, Ai Wei and Leonard Lik Pueh, Lim (2016) Fixed-bed Column Study for Adsorption of Cadmium on Oil Palm Shell-derived Activated Carbon. Journal of Applied Science & Process Engineering, 3 (2). ISSN 2289-7771

Loh, W.-T. and Voo, K.H.B. and Bong, David B.L. (2016) Video quality assessment based on a modified mean squared error. In: 4th IEEE International Conference on Signal and Image Processing Applications, ICSIPA 2015, 19 October 2015 through 21 October 2015, Pullman BangsarKuala Lumpur; Malaysia.

Loh, Woei-Tan and Bong, David B.L. (2016) Temporal video quality assessment method involving structural similarity index. 2016 IEEE International Conference on Consumer Electronics-Taiwan, ICCE-TW 2016. ISSN ISBN: 978-150902073-7

Lu, M. and Wan Azlan, Wan Zainal Abidin and Masri, T. and S. Chen, D. H. A. Lee (2016) Under-Frequency Load Shedding (UFLS) Schemes – A Survey. International Journal of Applied Engineering Research, 11 (1). pp. 456-472. ISSN 0973-4562

Mah, D.Y.S. (2016) Improving drowned drainage outlets with submerged orifices. Water Practice & Technology, 11 (4). pp. 849-856. ISSN 1751-231X

Mah, D.Y.S. (2016) River safe yield with the constraint of a contracted rectangular weir for surface water supply. Water Practice & Technology, 11 (4). pp. 712-720. ISSN 1751-231X

Mah, D.Y.S. and Boon, Yee Koh and Putuhena, F.J. and Nor Azalina, Rosli (2016) Modelling of msmacomponents: Porous pavement with detention system underneath for low traffic roads. Journal of Civil Engineering, Science and Technology, 7 (1). pp. 30-38. ISSN 2141-2634

Mah, Darrien Yau Seng (2016) Potential of road subsurface on-site stormwater detention system. Universiti Malaysia Sarawak, (UNIMAS). ISBN 978-967-2008-05-7

Mah, Darrien Yau Seng and Bong, Charles Hin Joo and Ong, Johnny King Ngu (2016) Flow characteristics of individual lot stormwater detention. Water Practice & Technology, 11 (4). pp. 721-727. ISSN 1751-231X

Mah, Yau Seng and Kuok, Kelvin K.K and Teo, F.Y. (2016) Case study of exploited riparian corridors: rapid assessment of ecological health for riparian buffer width. International Journal of River Basin Management, 14 (1). pp. 57-64. ISSN 1571-5124

Maimun, Binti Huja Husin and M. F., Bin Rahmat and N. A., Wahab (2016) Prediction of Dissolved Oxygen and Nitrate Concentration in Activated Sludge Wastewater Treatment using Artificial Neural Network. In: International UNIMAS STEM Engineering Conference 2018, 12 - 14 September 2018, Riverside Majestic, Kuching, Sarawak.

Maria, Ngu-Schwemlein and Suk, Fun Chin and Ryan, Hileman and Chris, Drozdowski and Clint, Upchurch and April, Hargrove (2016) Carbon nanodots as molecular scaffolds for development of antimicrobial agents. Bioorganic & Medicinal Chemistry Letters, 26 (7). pp. 1745-1749. ISSN 0960-894X

Marina, Patrick and Mah, Yau Seng and Putuhena, Frederik Josep and Wang, Yin Chai and Onni Suhaiza, Selaman (2016) TRMM Satellite Algorithm Estimates to Represent the Spatial Distribution of Rainstorms. MATEC Web of Conferences, 87. pp. 1-10. ISSN 2261236X

Marini, Sawawi and Siti Kudnie, Sahari and Kuan, Nicholas and Mahshuri, Yusof and Magdalene, Andew and Salleh, Sf and Rohana, Sapawi (2016) Optimisation of electrospinning parameter for Poly(L -lactic) acid (PLLA) electrospun nanofiber. MATEC Web of Conferences, 87. ISSN 2261236X

Masra, S.M.W. and Goh, K.L. and Henry, J.S. and Muhammad, M.S. and Djojodibroto, R.D. and Sapawi, R. (2016) Development of Finger Clubbing Meter. Applied Mechanics and Materials, 833. pp. 190-195. ISSN 1662-7482

Matarul, J. and Mannan, M. A. and Mohammad Ibrahim Safawi, M. Z. and Ibrahim, A. and Jainudin, N.A. and Yusuh, N.A. (2016) Performance-based Durability Indicators of Different Concrete Grades Made by the Local Ready Mixed Company: Preliminary Results. Procedia - Social and Behavioral Sciences, 224. pp. 620-625. ISSN 1877-0428

Md Rezaur, Rahman and Lai, Josephine Chang Hui and Sinin, Hamdan (2016) Physical, Mechanical, Thermal and Morphology Properties of Biodegradable Polymer Nanocomposites and Its Comparison. MATEC Web of Conferences, 87. ISSN 2261236X

Md Rezaur, Rahman and Md Mizanur, Rahman (2016) Impact of Maleic Anhydride, Nanoclay, and Silica on Jute Fiber-reinforced Polyethylene Biocomposites. BioResources, 11 (3). pp. 5905-5917. ISSN 1930-2126

Md Rezaur, Rahman and Md Mizanur, Rahman and Sinin, Hamdan and Josephine, Chang Hui Lai (2016) Impact of delignification on mechanical, morphological, and thermal properties of wood sawdust reinforced unsaturated polyester composites. Journal of Vinyl and Additive Technology, 11 (3). pp. 5905-5917. ISSN 1548-0585

Md. Eaqub, Ali and Md.M., Rahman and Th. S., Dhahi and Muhammad, Kashif and Md. Shaheen, Sarkar and Wan Jeffrey, Basirun and Hamid, SBA and Bhargava, Suresh (2016) Nanostructured Materials: Bioengineering Platforms for Sensing Nucleic Acids. Reference Module in Materials Science and Materials Engineering. pp. 1-26. ISSN 978-0-12-803581-8 (ISBN)

Md. Faruk, bin Hossen (2016) Characterization of chemically treated jute fiber reinforced polyethylene clay nanocomposites as a function of treatment methods. PhD thesis, UNIMAS.

Md. Saiful, Islam and Irmawati, Binti Ramli and Sinin, Hamdan and Rezaur, Rahman and Ahmad Adib, Aiman and Abdul, Rasyid and Amyrah, Auni (2016) Impact of Nanoclay on the Properties of Wood Polymer Nanocomposites. In: Nanoclay Reinforced Polymer Composites. Engineering Materials . Springer Singapore, pp. 291-307. ISBN 978-981-10-1953-1

Md. Tipu, Sultan and Md. Rezaur, Rahman and Sinin, Hamdan and Chang, Josephine Hui Lai and Zainal Abidin, Talib (2016) Clay Dispersed Styrene-co-Glycidyl Methacrylate Impregnated Kumpang Wood Polymer Nanocomposites: Impact on Mechanical and Morphological Properties. BioResources, 11 (3). pp. 6649-6662. ISSN 1930-2126

Mohamad Ismail, Mohamad Salim (2016) Conversion of Castor oil to Biodiesel by Using Heterogeneous Catalyst. Masters thesis, UNIMAS.

Mohamad Syamim, Hamsawi and Ana Sakura, Zainal Abidin and Shahrol, Mohamaddan and Rasli, Muslimen and Mohd Syahmi, Jamaludin and Nurul Izzati, Hashim and Nazreen, Junaidi (2016) A Review on Development of Kek Lapis Sarawak's Machine. MATEC Web of Conferences, 87. ISSN 2261236X

Mohamaddan, Shahrol and Mohd Mohtar, A. M A A and Junaidi, Nazreen and Mohtadzar, Nur Alia Athirah Binti Hj and Mohamad Suffian, Mohamad Syazwan Zafwan (2016) Development of Keropok Keping Drying Machine for Small & Medium Enterprises (SMEs). IOP Conference Series: Materials Science and Engineering, 114 (1). ISSN 17578981

Mohamaddan, Shahrol and Syed Shazali, Syed Tarmiz and Nur Alia, Athirah Mohtadzar (2016) A review on assistive tools for autistic patients. 2016 IEEE EMBS Conference on Biomedical Engineering and Sciences (IECBES). pp. 51-56. ISSN ISBN: 978-1-4673-7791-1

Mohammad Fadzli, bin Hj Jawawi (2016) Chemical Stabilization of Mukah Peat with Locally Available Agricultural and Industrial By-Products. Masters thesis, UNIMAS.

Mohammad Omar, Abdullah and Pei, FangTee and Ivy Tan, Ai Wei and Nur Khairunnisa, Abdul Rashid and Mohamed Afizal, Mohamed Amin and Cirilo, Nolasco-Hipolito and Kopli, Bujang (2016) Review on hybrid energy systems for wastewater treatment and bio-energy production. Renewable and Sustainable Energy Reviews, 54 (1). pp. 235-246. ISSN 1364-0321

Mohammad Zawawi, Rosman and Siti Farhanah, SM Johan and Norsharina, Abdul Rahman and Chee Ming, Chan (2016) Influence of Water Content on the Flow Consistency of Dredged Marine Soils. MATEC Web of Conferences, 78. 01094. ISSN 2261-236X

Mohd Azlan, Ismail and Al Khalid, Othman and Hushairi, Zen and Mohd Suffian, Misran (2016) CFD Modelling of Pump as Turbine with Various Number of Blade for Microhydro System. Journal of Applied Science & Process Engineering, 3 (1). pp. 17-23. ISSN 2289-7771

Mohd Danial, Ibrahim and M. Z., Mohtar and A. A., Alias and L. K., Wong and Y. S., Yunos and M. R. A., Rahman and A., Zulkharnain and C. S., Tan and R., Thayan (2016) Air Flow Optimization of Discharge Duct based on Peregrine Falcon’s Diving Wing Shape for Forward Curve Centrifugal Blower. Journal of Advanced Research in Applied Sciences and Engineering Technology. pp. 1-4. ISSN 2462-1943

Mohd Fareez Edzuan, Abdullah and Sim Shu, Zhing and Clarence Bilong, Bugik (2016) Biodiesel unsaturation degree effects on diesel engine NOx emissions and cotton wick flame temperature. In: 2nd International Conference on Automotive Innovation and Green Vehicle AiGEV 2016, 2 August 2016 through 3 August 2016, Malaysia Automotive Institute (MAI) Cyberjaya, Selangor; Malaysia.

Mohd Fareez Edzuan, Bin Abdullah and Nadzirah, Binti Madzrol and Rolf Willa, Anak Patrick Sandin (2016) Effects of Biodiesel Saturation Degrees on NOx Emission and FTIR Spectroscopy. Journal of Applied Science & Process Engineering, 3 (1). ISSN 2289-7771

Muhammad Khusairy, Bakri and Elammaran, Jayamani and Sinin, Hamdan and Md Rezaur, Rahman and Kokheng, Soon and Akshay, Kakar (2016) Fundamental study on the effect of alkaline treatment on natural fibers structures and behaviors. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8759-8763. ISSN 18196608

Muhammad Naim, Leman and Shahrol, Mohamaddan and Mohamad Syazwan Zafwan, Mohamad Suffian and Abang Mohamad Aizuddin, Abang Mohd Mohtar (2016) Development of Control System for Keropok Keping Drying Machine. MATEC Web of Conferences, 87. ISSN 2261236X

Muhammad Shoaib, Farooq and Norizan, Jaafar and Kartinah, Ayupp and Maimoona, Salam and Yasir Hayat, Mughal (2016) Impact Of Entrepreneurial Skills And Family Occupation On Entrepreneurial Intentions. Science International (Lahore), 28 (3). pp. 3145-3148. ISSN 1013-5316

Muhammad Syukri Imran, Abdullah and Azhaili, Baharun and Siti Halipah, Ibrahim and Wan Azlan, Wan Zainal Abidin (2016) Nocturnal Cooling of Water as Free Cooling Source for Building Indoor Radiant Cooling in Malaysian Climate. Applied Mechanics and Materials, 833. pp. 94-101. ISSN 1662-7482

Muhammad Syukri Imran, Abdullah and Azhaili, Baharun and Siti Halipah, Ibrahim and Wan Azlan, Wan Zainal Abidin (2016) RENEWABLE INDOOR RADIANT COOLING AND EARTH TUBE HEAT EXCHANGER HYBRID FOR THERMAL COMFORT IMPROVEMENT. Journal of Building Performance, 7 (1). pp. 56-71. ISSN 2180-2106

Murad, S.A.Z. and Md Isa, M.N. and Bakar, F.A. and Sapawi, R. (2016) High efficiency 2.4 GHz CMOS two stages class-F power amplifier for wireless transmitters. Recent Advances in Electrical and Electronic Engineering, 9 (1). pp. 63-67. ISSN 23520965

Mustafa Kamal, M. and Rubiyah, Baini and Shahrol, Mohamaddan and Henry Ragai, A.R. and Soh Fong, L. and Abdul Rahman, N. and Mili, N. and Siti Noor Linda, Taib and Othman, A.K. and Mohammad Omar, Abdullah (2016) Comparisons of the physicochemical and functional properties of commercially and traditionally processed sago starch. MATEC Web of Conferences, 87. ISSN 2261236X

N., Jaalam and N.A., Rahim and A.H.A., Bakar and Tan, Chia Kwang and Ahmed Mohamed, Ahmed Haidar (2016) A comprehensive review of synchronization methods for grid-connected converters of renewable energy source. Renewable and Sustainable Energy Reviews, 59. ISSN 1364-0321

N.A., Abdul Majid (2016) Musculoskeletal model of awkward carrying postures. Journal Cogent Engineering, 3 (1). ISSN 2331-1916

Nadzirah, Sh. and Uda, Hashim and Kashif, M. and Shahidah Arina, Shamsuddin (2016) Stable electrical, morphological and optical properties of titanium dioxide nanoparticles affected by annealing temperature. Microsystem Technologies. pp. 1-8. ISSN 9467076

Nagaratnam, Brabha H. and Muhammad Ekhlasur, Rahman and Abdul Karim, Mirasa and Mohammad, Abdul Mannan and Seyed, Omid Lame (2016) Workability and heat of hydration of self-compacting concrete incorporating agro-industrial waste. Journal of Cleaner Production, 112. pp. 882-894. ISSN 0959-6526

Nam, Nguk Chiu (2016) Modelling of road subsurface as component of On-Site Detention (OSD) urban drainage system. Masters thesis, Universiti Malaysia Sarawak.

Naser, A. N. Muhaisen and Musse, Mohamud Ahmed and Sheroz, Khan and Mohamed, H. Habaebi and Nabil, A. Ahmed and Atika, Arshad (2016) Analytical model of Kuwait power consumption. 2016 IEEE Student Conference on Research and Development (SCOReD). ISSN 978-1-5090-2948-8 (Online)

Naser, A. N. Muhaisen and Musse, Mohamud Ahmed and Sheroz, Khan and Mohamed, H. Habaebi and Nabil, A. Ahmed and Atika, Arshad (2016) Development of Renewable Energy Potential in Kuwait. 2016 IEEE Student Conference on Research and Development (SCOReD). ISSN 978-1-5090-2948-8 (Online)

Nasser Rostam, Afshar and Ev Rochelle Ashzana, Roger Sumail (2016) Factor causing time delay in construction Malaysia. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 5 (8). ISSN 2278-3075

Nazeri, Abdul Rahman (2016) Sustainable utilisation of pelletised biomass wastes as fuel to power generation in Sarawak. PhD thesis, Universiti Malaysia Sarawak.

Ng, Cheehiong and Mannan, Mohammad Abdul and Kameswara Rao, N. S V (2016) Structural performance of precast floor panel using oil palm shell solid waste. Journal of Infrastructure Systems, 22 (4). ISSN 10760342

Ng, Shi W. and Kismet, Anak Hong Ping and Shafrida, Sahrani and Mohammad Hamiruce, Marhaban and Mohd I., Sariphan and Toshifumi, Moriyama and Takashi, Takenaka (2016) Preliminary results on estimation of the dispersive dielectric properties of an object utilizing frequency-dependent forward-backward time-stepping technique. Progress In Electromagnetics Research M, 49. pp. 61-68. ISSN 1937-8726

Nik Amirah Farhana, Nik Ahmad Lutfi and Mohd Farid, Atan and Nazeri, Abdul Rahman and Shanti Faridah, Salleh and Noraziah, Abdul Wahab (2016) Study On Mathematical Model In Simulating Cymbopogon Winterianus Essential Oil Extraction By Steam Distillation. Journal of Applied Science & Process Engineering, 3 (1). pp. 1-16. ISSN 2289-7771

Noor, S.H.M. and Syam, K. and Jaafar, A.A. and Sharif, M.F.M and Ghazali, M.R. and Ibrahim, W.I. and Atan, M.F. (2016) Development of a working Hovercraft model. In: IOP Conference Series: Materials Science and Engineering, 12 - 14 November 2015, Swiss-Garden Hotel Kuala Lumpur.

Noraida, Razali and Norazzlina, M.Sa’don and Abdul Razak, Abdul Karim (2016) Strength and Durability Effect on Stabilized Subgrade Soil. Journal of Civil Engineering, Science and Technology (JCEST), 7 (1). pp. 9-19.

Nordiana, Rajaee and Azham, Zulkharnain and Awang Ahmad Sallehin, Awang Husaini (2016) Basic Architecture and Applications of DNA Computing. Transactions on Science and Technology, 3 (1-2). pp. 277-282. ISSN 2289-8786

Norsuzailina, Sutan and Nafisa, Tamanna and Tuladhar, Rabin and Teo, Delsye Ching Lee and Ibrahim, Yakub (2016) POZZOLANIC PROPERTIES OF GLASS POWDER IN CEMENT PASTE. Journal of Civil Engineering, Science and Technology, 7 (2). pp. 75-81. ISSN 2462-1382

Nurzawani, Binti Md. Sofwan and Afzan Ahmad, Zaini and Siti Akhtar, Mahayuddin (2016) Preliminary study on the identification of safety risks factors in the high rise building construction. Jurnal Teknologi, 78 (5-3). pp. 13-18. ISSN 2180–3722

Pei-Fang, Tee and Mohammad Omar, Abdullah and Ivy Tan, Ai Wei and Mohamed Afizal, Mohamed Amin and Cirilo, Nolasco-Hipolito and Kopli, Bujang (2016) Performance evaluation of a hybrid system for efficient palm oil mill effluent treatment via an air-cathode, tubular upflow microbial fuel cell coupled with a granular activated carbon adsorption. Bioresource Technology, 216. pp. 478-485. ISSN 0960-8524

Prabir, Kumar Kolay and Md Aminur, Rahman (2016) Physico-geotechnical properties of peat and its stabilisation. Proceedings of the Institution of Civil Engineers: Ground Improvement, 169 (3). pp. 206-216. ISSN 17550750

Prashobh, Karunakaran and Katherine, Thomas and Shirley, Rufus and Lakshmanan, Gurusamy and Abdullah Azfar, Setari (2016) Replacing Ground Rod Joining Cable from Copper to Galvanized Iron. International Journal of Applied Engineering Research, 11 (17). pp. 9207-9212. ISSN 0973-4562

Rahman, M.R. (2016) Acoustic Properties of Syzygium sp., Dialium sp., Gymnostoma sp., and Sindora sp. Wood. BioResources, 11 (3). pp. 5941-5948. ISSN 1930-2126

Rahman, M.R. (2016) Effect of clay content on the morphological, thermo-mechanical and chemical resistance properties of propionic anhydride treated jute fiber/polyethylene/nanoclay nanocomposites. Measurement, 90. pp. 404-411. ISSN 0263-2241

Raudhah, Ahmadi and Nurulasma, A I Zainudin and Ismanizan, Bin Ismail and Mannan, M.A. and Ana Sakura, Zainal Abidin (2016) Micro Fine Sized Palm Oil Fuel Ash Produced Using a Wind Tunnel Production System. Advances in Materials Science and Engineering, 2016. pp. 1-6. ISSN 1687-8434

Raudhah, Ahmadi and Saiful, M.S. and Zawawi, D.F. and Sonia, Z A Rahman (2016) Production and Characterisation of Microfine Sized Palm Oil Fuel Ash (POFA) Originated from Bau, Lundu Palm Oil Mill. MATEC Web of Conferences, 87. ISSN 2261236X

Reddy, Anr and Aa, A. Saleh and Md Saiful, Islam and Sinin, Hamdan (2016) Active Heterogeneous CaO Catalyst Synthesis from Anadara granosa (Kerang) Seashells for Jatropha Biodiesel Production. MATEC Web of Conferences, 87. ISSN 2261-236X

Riji, Burmamu Benjamin. (2016) Characterization and Modelling of Pollutant Transport from Vegetable Waste Dumpsites at Gwari Market, Yola, Nigeria. PhD thesis, Universiti Malaysia Sarawak.

Roslan, Q. and Ibrahim, S.H. and Affandi, R. and Mohd Nawi, M.N. and Baharun, A. (2016) A literature review on the improvement strategies of passive design for the roofing system of the modern house in a hot and humid climate region. Frontiers of Architectural Research, 5 (1). pp. 126-133. ISSN 2095-2635

Rosli, N. and Rajaee, N. and Bong, D. (2016) Non negative matrix factorization for music emotion classification. In: International Conference on Machine Learning and Signal Processing, MALSIP 2015, 12 June 2015 through 14 June 2015, Melaka; Malaysia.

Rumana, Tasnim and Sheroz, Khan and Musse, Mohamud Ahmed and Atika, Arshad (2016) A QUALITATIVE ANALYSIS OF BIOMASS FLOW SENSING BEHAVIOR USING CAPACITIVE TECHNIQUE. IIUM Engineering Journal, 17 (1). pp. 29-40.

Saravana, Kannan Thangavelu and Abu Saleh, Ahmed and Ani, F.N. (2016) Performance of Petrol Engine using Gasoline–Ethanol–Methanol (GEM)Ternary mixture as Alternative Fuel. Applied Mechanics and Materials, 833. pp. 41-48. ISSN 1662-7482

Sa‘don, N.M. and Abdul Karim, A. R. and Ahamad, Z. and Mariappan, A. (2016) Sarawak Hemic Peat Consolidation Settlement and Shear Strength Behaviour. In: 15th International Peat Congress 2016 - Peatlands in Harmony: Agriculture, Industry and Nature, 15 - 19 August 2016, Pullman Hotel, Kuching Sarawak.

Shafqat, Syed Salman. (2016) Syntheses and Characterization of Silica Nanoparticles Grafted with Selected Heterocyclic Derivatives. PhD thesis, UNIMAS.

Shafrida, Sahrani and Kuroda, Michiko (2016) Numerical technique for wireless communication system with high speed movement. 2016 URSI International Symposium on Electromagnetic Theory, EMTS 2016 (757132). pp. 100-102. ISSN ISBN: 978-150902502-2

Shahidah Arina, Shamsuddin and Mohd Nazree, Derman and Uda, Hashim and Muhammad Fayyaz, Kashif and Tijjani, Adam and Nur Hamidah, Abdul Halim and Muhammad Faheem, Mohd Tahir (2016) Nitric acid treated multi-walled carbon nanotubes optimized by Taguchi method. AIP Conference Proceedings, 1756. pp. 1-7. ISSN 1551-7616

Shahrol, Mohamaddan and Annisa, Jamali and Ana Sakura, Zainal Abidin and Mohd Syahmi, Jamaludin and MUHAMAD FADZLI, ASHARI and Helmy, Hazmi (2016) Design, Fabrication and Control of Upper Limb Rehabilitation Robot Prototype for Stroke Patients. Journal of Advanced Manufacturing Technology, 12 (1 (2)). pp. 289-299. ISSN 2289-8107

Shahrol, Mohamaddan and Case, Keith (2016) Crowd simulation : a video observation and agent-based modelling approach. International Journal of the Digital Human, 1 (3). pp. 229-247. ISSN 2046-3383

Shamsiah, Binti Suhaili and Takahiro, Watanabe (2016) High throughput evaluation of SHA-1 implementation using unfolding transformation. ARPN Journal of Engineering and Applied Sciences, 11 (5). pp. 3350-3355. ISSN 1819-6608

Shanti Faridah, Salleh and Muhammad Hifzhan Amsyar, Zulkifli and Mohd Rahmat, Jalani (2016) Production of Biogas Using Dairy Manure as Feedstock and Rumen Fluid as Inoculum. Journal of Applied Science & Process Engineering, 3 (2). pp. 83-89. ISSN 2289-7771

Sherra Bellina, Barrabas and Rubiyah, Baini and Norsuzailina, Mohamed Mohamed Sutan and Yakub, Ibrahim and Khairul Anwar, Mohamad Said and Nur Syuhada, Ahmad Zauzi and Noraziah, Abdul Wahab and Hapiszul, Sulaiman (2016) HC-SCR: NOx Reduction using Mn and Cu Catalysts Impregnated in Coconut and Palm Kernel Shell Activated Carbon. MATEC Web of Conferences, 87. pp. 1-6. ISSN 2261236X

Siti Farhanah, SM Johan and Chan, Chee Ming (2016) Shear Resistance Enhancement of Oil-Contaminated Railtrack Ballast with Rubber Circular Patch Formulation. Key Engineering Materials, 701. pp. 320-324. ISSN 1662-9795

Siti Kartina, Abdul Karim and Lim, Soh Fong and David Chua, S.N. and Shanti Faridah, Salleh and Law, Puong Ling (2016) Banana Fibers as Sorbent for Removal of Acid Green Dye from Water. Journal of Chemistry, 2016. ISSN 20909063

Siti Zawiah, Md Dawal and Wan Nor Liza, Mahadi and Marizan, Mubin and Dian Darina Indah, Daruis and Shahrol, Mohamaddan and Farah Atikah, Abdul Razak and Nurul Izzah, Abdul Wahab and Mohd Haziq, Mohd Abd Wahab and Nursyahirah, Adnan and Siti Afifa, Anuar and Raziff, Hamsan (2016) Wudu’ workstation design for elderly and disabled people in Malaysia’s mosques. Iranian Journal of Public Health, 45. pp. 114-124. ISSN 0304-4556

Suhaili, S. and Watanabe, T. (2016) Design of Optimized Pipelined RIPEMD-160 with High Frequency and Throughput. Journal of Advanced Research in Computing and Applications, 3 (1). pp. 18-28. ISSN 2462-1927

Syed Salman, Shafqat and Amir Azam, Khan and Misbahulain, Khan and Kuan, Nicholas Hoo Tien and Mohd Syahmi, Jamaludin and Pang, Suh Cem (2016) Environmentally Benign Syntheses and Characterization of 4- Aryldihydropyrimidin-2(1H)-ones. MATEC Web of Conferences, 87. ISSN 2261236X

Sylvester Kenneth, Sedah and Ana Sakura, Zainal Abidin and Andrew Ragai, Henry Rigit and Mohamed A., Ismail and Raudhah, Ahmadi and Md Abdul, Mannan (2016) Development of Wind Tunnel for Ultrafine Palm Oil Fuel Ash Separator. MATEC Web of Conferences, 87. ISSN 2261236X

Taharah, Binti Edin (2016) An Experimental Investigation of Biodiesel from Jatropha Oil as a Green Fuel for Diesel Engine. Masters thesis, UNIMAS.

Taib, S.N.L. and Striprabu, S. and Ahmad, F. and Charmaine, H.J. and Patricia, N.E. (2016) Investigation on Strength Development in RBI Grade 81 Stabilized Serian Soil with Microstructural Considerations. Soft Soil Engineering International Conference 2015 (SEIC2015), 136 (1). ISSN 1757-899X

Tamrin, K. F. and Nadeem Ahmed, Sheikh and Rahmatullah, B. (2016) Numerical Analysis Of Swirl Intensity In Turbulent Swirling Pipe Flows. Jurnal Teknologi, 78 (5-6). pp. 133-141. ISSN 2180–3722

Tamrin, K. F. and Rahmatullah, B. and Samuri, S. M. and Mahamud, S. T. (2016) Particle Image Classification in Digital Holographic Microscopy by Normalized Cross Correlation. In: 5th International Conference on Communications, Signal Processing Computing and Information Technologies (ICCSPCIT-2016), 16-17 December 2016, Hyderabad, India. (In Press)

Tamrin, K. F. and Rahmatullah, B. and Williams, James (2016) A review on noise suppression and aberration compensation in holographic particle image velocimetry. Cogent Physics, 3. ISSN 2331-1940

Tan, I. A. W. and Chan, J.C. and Hameed, Bassim Hamid and Lim, Leonard Lik Pueh (2016) Adsorption behavior of cadmium ions onto phosphoric acid-impregnated microwave-induced mesoporous activated carbon. Journal of Water Process Engineering, 14. ISSN 22147144

Tan, Jerren Yun Ping. (2016) Traditional Procurement Route Selection Guideline for Construction Projects in Malaysia. Masters thesis, UNIMAS.

Tay, C.C. and Hamdan, S. and Osman, M.S.B. (2016) Properties of Sago Particleboards Resinated with UF and PF Resin. Advances in Materials Science and Engineering, 2016. ISSN 1687-8434

Tay, Chen Chiang and Sinin, Hamdan and Mohd Shahril, Osman (2016) Effects of density of sago/urea formaldehyde particleboard towards its thermal stability, mechanical and physical properties. Jurnal Teknologi, 78 (10). pp. 187-197. ISSN 01279696

Tay, Kai Meng and Liew, Meng Pang and Chee, Peng Lim (2016) Monotone Fuzzy Rule Relabeling for the Zero-Order TSK Fuzzy Inference System. IEEE Transactions on Fuzzy Systems, 24 (6). pp. 1455-1463. ISSN 1063-6706 (In Press)

Teo, DCL (2016) Application of polyvinyl alcohol (PVA) in cement-based composite materials: A review of its engineering properties and microstructure behavior. Construction and Building Materials, 107. pp. 172-180. ISSN 09500618

Thangavelu, S.K. and Abu Saleh, Ahmed and Farid Nasir, Ani (2016) Impact of metals on corrosive behavior of biodiesel-diesel- ethanol(BDE) alternative fuel. Renewable Energy & Power Quality Journal, 94. pp. 1-9. ISSN 2172-038X

Thangavelu, S.K. and Ahmed, A.S. and Ani, F.N. (2016) Corrosive characteristics of bioethanol and gasoline blends for metals. International Journal of Energy Research, 2016. ISSN 0363907X

Thangavelu, Saravana Kannan and Abu Saleh, Ahmed and Farid Nasir, Ani (2016) Review on bioethanol as alternative fuel for spark ignition engines. Renewable and Sustainable Energy Reviews, 56. pp. 820-835. ISSN 1364-0321

Thong, Chia Chia (2016) Mechanical and Durability Properties of Polyvinyl Alcohol (PVA) Treated Oil Palm Shell (OPS) Lightweight Concrete. Masters thesis, UNIMAS.

Tian, Chuan Min (2016) Design, Develop And Techno-Economical Study of a Run-of-the-Weir Micro Hydro System for a Sensitive Site. Masters thesis, UNIMAS.

Universiti Malaysia Sarawak, Centre for Graduate Studies (2016) Transcript 2016 - Doctor of Philosophy (Electronics Engineering) - Faculty of Engineering. [Transcript] (Unpublished)

Universiti Malaysia Sarawak, Centre for Graduate Studies (2016) Transcript 2016 - Master of Engineering (Civil Engineering) - Faculty of Engineering. [Transcript] (Unpublished)

Universiti Malaysia Sarawak, Centre for Graduate Studies (2016) Transcript 2016 - Sarjana Kejuruteraan (Sivil) - Fakulti Kejuruteraan. [Transcript] (Unpublished)

Wan Farhana, Mohamad and Amirazam, Khan and Faiz, Ahmad and Abdullah, Yassin (2016) Physical and Mechanical Properties of Ni-Cr based composites with addition of solid lubricants produced through powder metallurgy process. MATEC Web of Conferences, 87. ISSN 2261-236X

Wan Nadzri, Osman and Mohd Nasrun, Mohd Nawi and Rohaizah, Saad and Herman Shah, Anuar and Siti Halipah, Ibrahim (2016) A proposal for improving sustainability practice through the implementations of reuse and recycle technique in Malaysian construction industry. AIP Conference Proceedings, 1761. ISSN 0094243X

White, David J. and Randolph, Mark F. and Gaudin, Christophe and Fauzan, Sahdi (2016) The Impact of Submarine Slides on Pipelines: Outcomes from the COFS-MERIWA JIP. Offshore Technology Conference. ISSN ISBN:9781510824294

Yakub, Ibrahim and Mohamed Sutan, N. and Mohd Said, K. A. and Anuar, Abudul Rahim and Yun Hin, Taufiq Yap (2016) Cu-Mn and Cu-Ce supported over agro-based carbons: Characteristics and NOx adsorption study. Journal of Materials and Environmental Science, 7 (9). pp. 3465-3476. ISSN 2028-2508

Yi, Wen Kerk and Liew, Meng Pang and Kai, Meng Tay and Chee, Peng Lim (2016) Multi-expert decision-making with incomplete and noisy fuzzy rules and the monotone test. 2016 IEEE International Conference on Fuzzy Systems (FUZZ-IEEE). pp. 94-101. ISSN ISBN: 978-1-5090-0626-7

Yiin, Chung Loong and Suzana, Binti Yusup and Quitain, Armando T. and Mitsuru, Sasaki and Yoshimitsu, Uemura and Tetsuya, Kida (2016) Characterization of natural low transition temperature mixtures (LTTMs): Green solvents for biomass delignification. Bioresource Technology, 199. pp. 258-264. ISSN 0960-8524

Yiin, Chung Loong and Suzana, Binti Yusup and Quitain, Armando T. and Sasaki, Mitsuru and Uemura, Yoshimitsu and Kida, Tetsuya (2016) Microwave-assisted hydrothermal extraction of natural malic acid for the synthesis of low transition temperature mixtures. Journal of Cleaner Production, 113. pp. 919-924. ISSN 0959-6526

Yiin, Chung Loong and Suzana, Yusup and Mustakimah, Mohamed and Parncheewa, Udomsap and Boonyawan, Yoosuk and Sittha, Sukkasi (2016) Stabilization of Empty Fruit Bunch derived Bio-oil using Solvents. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems.

Yong, Eric Pik Kwong. (2016) Mechanical and Durability Properties of Concrete Containing Palm Oil Fuel Ash (POFA) and Oil Palm Shell (OPS). Masters thesis, UNIMAS.

Yong yin, Sia and Tan, I. A. W. and Mohammad Omar, Abdullah (2016) Adsorption of colour, TSS and COD from palm oil mill effluent (POME) using acid-washed coconut shell activated carbon: Kinetic and mechanism studies. MATEC Web of Conferences, 87. pp. 1-7. ISSN 2261-236X

Yonis. M, Yonis Buswig and W. M., Utomo and Z. A., Haron and A., Bakar (2016) Power sharing analysis of a new modified multi-input interleaved boost converter based on H-Bridge cells. POWER SHARING ANALYSIS OF A NEW MODIFIED MULTI-INPUT INTERLEAVED BOOST CONVERTER BASED ON H-BRIDGE CELLS, 11 (6). 3943 -3950. ISSN 1819-6608

Zahrim, A.Y. and Ricky, L.N.S. and Hilal, N. and Tamrin, K. F. (2016) Ammonia-Nitrogen Recovery from Synthetic Solution using Agricultural Waste Fibers. Indian Journal of Science and Technology, 10 (16). ISSN 09746846

Zaini, N. and Ibrahim, S.H. and Baharun, A. and Nawi, M.N.M. (2016) A review of embodied energy (EM) analysis of Industrialised Building System (IBS). Journal of Materials and Environmental Science, 7 (4). pp. 1357-1365. ISSN 2028-2508

Zamhuri, Bin Hj. Drahman (2016) An Evaluation of Airport Pavement Management System (APMS) Application In Kuching International Airport. Masters thesis, UNIMAS.

Zauzi, N.S.A. and Zakaria, M.Z.H. and Baini, R. and Rahman, M.R. and Mohamed Sutan, N. and Hamdan, S. (2016) Influence of Alkali Treatment on the Surface Area of Aluminium Dross. Advances in Materials Science and Engineering, 2016. ISSN 1687-8434