Items where Division is "Academic Faculties, Institutes and Centres > Faculty of Engineering" and Year is 2011

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | E | G | H | I | J | K | L | M | N | O | P | R | S | T | U | V | Y
Number of items: 95.

A

Abba, I. and Abidin, W.A.W.Z and Othman, A.K. and Hong Ping, Kismet and Abdullah, M. and Voon Pai, B. (2011) Best Position Method for Experimental Data Acquisition Systems Using Low-cost GPS Receiver. IEEE International Conference on Space Science and Communication (IconSpace), 2011. ISSN 2165-431X (Online)

Abdul Qayoom, Jakhrani and Othman, A.K. and Andrew Ragai, Henry Rigit and Saleem, Raza Samo and Shakeel Ahmed, Kamboh (2011) Life Cycle Cost Analysis of a Standalone PV System. 2012 International Conference in Green and Ubiquitous Technology. ISSN ISBN: 978-1-4577-2171-7

Abdul Razak, Abdul Karim and Quenneville, Pierre and Norazzlina, M.Sa'don and Ingham, Jason M. (2011) Wall-Diaphragm Connection Assessment Guidelines for URM Buildings. In: the Ninth Pacific Conference on Earthquake Engineering (PCEE 2011), April 14-16, 2011, Auckland, New Zealand.

Abdus, Salam and Md. Abu, Affan and Mohd Razip, Asaruddin and Tiekink, Edward (2011) 3-{(E)-[1-(2-Hydroxyphenyl)ethylidene]-amino}-1-(2-methylphenyl)thiourea. Acta Crystallographica Section E Structure Reports Online, 67 (5). ISSN 1600-5368

Ana Sakura, Zainal Abidin and Rosnah, Mohd Yusuff and Rasli, Muslimen (2011) Exploratory Study: Design Capabilities Development for Malaysian Vendors in Automotive Industry. Proceedings of the 2011 International Conference on Industrial Engineering and Operations Management Kuala Lumpur, Malaysia, January 22 – 24, 2011. ISSN 978-0-9808251-0-7 (ISBN)

Annisa, Jamali and Raisuddin, Khan and Md. Mozasser, Rahman (2011) A New Geometrical Approach to Solve Inverse kinematics of Hyper Redundant Robots with variable link length. In: 2011 4th International Conference on Mechatronics (ICOM), 17-19 May 2011, Kuala Lumpur, Malaysia.

Azhaili, Baharun and Siti, Halipah Ibrahim and Mohammad Omar, Abdullah and Ooi, Koon Beng (2011) A Passive Malaysian Residential Building With A Hydronic Radiator. International Journal of Recent Research and Applied Studies, 7 (4). pp. 380-389. ISSN 2076-7366

B

Baharun, A. (2011) Experimental validation of energyPlus simulation of a single storey building. UNIMAS E-Journal of Civil Engineering, 2 (1).

Borhan, M.M (2011) Laboratory study of water absorption of modified mortar. UNIMAS E-Journal of Civil Engineering, 2 (1).

Bustami, R. (2011) River Bedup catchment water level prediction using pre-developed ANN Model of Siniawan catchment. UNIMAS E-Journal of Civil Engineering, 2 (1).

C

Chai, Koh Kiong and Tay, Kai Meng and Mohammad Omar, Abdullah (2011) Development of A Solar Photovoltaic System Equipped With A Sun Tracker System: A Case Study In Kuching, Sarawak. International Journal of Recent Research and Applied Studies, 7 (4). pp. 373-379. ISSN 2349-4891

Charles, Hin Joo Bong and Tze, Liang Lau and Aminuddin, Ab. Ghani (2011) Sediment deposition characteristics of urban concrete drains in Kuching City, Sarawak, Malaysia. In: 3rd International Conference on Managing Rivers in the 21st Century : Sustainable Solutions for Global Crisis of Flooding, Pollution and Water Scarcity, 6th – 9th December 2011.

E

Ehsan, Ahmed (2011) Performance of profiled steel sheet dry board system under flexural bending and vibration. In: UNSPECIFIED.

G

Gaddafi, Ismail and Badorul Hisham, Abu Bakar and Khairul Khuzaimah, Abdul Rahim (2011) Basic and Grade Stress for Some Timber in Sarawak. UNIMAS E-Journal of Civil Engineering, 2 (2).

Gaddafi, Ismaili and Badorul Hisham, Abu Bakar and Khairul Khuzaimah, Abdul Rahim (2011) The Behavior of Strength Properties from Three Different Tree Boles of Aras in Sarawak. UNIMAS E-Journal of Civil Engineering, 2 (2).

Gaddafi, Ismaili and Badorul Hisham, Abu Bakar and Khairul Khuzaimah, Abdul Rahim (2011) Evaluation of Acacia Mangium in Structural Size at Green Condition. UNIMAS E_Hournal of Civil Engineering, 2 (2).

Ghulam, Hussain and Abdul Qadeer, Malik and Khairuddin, Sanaullah (2011) The Waveshaper Effect on Ta-MS Multiliner Explosive Formed Pojectile with Tantalum as Penetrator and Mild Steel as Stabilization Base. Mehran University Research Journal Of Engineering & Technology, 30 (3). ISSN 0254-7821]

Gingos, G.S and Mohamed Sutan, N. (2011) Effect of PFA on strength and water absorption of mortar. UNIMAS E-Journal of Civil Engineering, 2 (1).

H

Hairul Azman, Roslan and Awang Ahmad Sallehin, Awang Husaini and Ang, Chung Huap (2011) HOT PHENOL EXTRACTION OF TOTAL RNA FROM Thermoascus aurantiacus AND CHARACTERIZATION OF ITS THERMOSTABLE XYLANASE GENE. Borneo Journal of Resource Science and Technology, 1 (1). pp. 55-58. ISSN 0128-2972

Hamdan, S. and Hoque, M.N and Sutan, N.M (2011) Dynamic property analysis and development of composite concrete floor (CCF) and vibration serviceability : a review. International Journal of the Physical Sciences, 6 (34). pp. 7669-7693.

Ho, Lee Lee. (2011) Improving environmental performance with implementation of enviromental management system. Masters thesis, Faculty of Engineering.

Hojati, A.T and Fereirra, L. and Charles, P. and Kabit, M.R (2011) An Analysis of Traffic Incidents on an Australian Urban Road Network. In: Australasian Transport Research Forum 2011 Proceedings, 28-30 September 2011.

I

Idrus, M.A.M.M and Hamdan, S. and Islam, M.S. (2011) Treated tropical wood sawdust-polypropylene polymer composite : mechanical and morphological study. Journal of Biomaterials and Nanobiotechnology, 2.

J

Jakhrani, A.Q. and Othman, A.K and Rigit, A.R.H. and Samo, S.R. (2011) Determination and Comparison of Different Photovoltaic Module Temperature Models for Kuching, Sarawak. In: 2011 IEEE First Conference on Clean Energy and Technology CET.

Jakhrani, A.Q. and Othman, A.K. and Rigit, A.R.H. and Samo, S.R. (2011) Comparison of solar photovoltaic module temperature models. World Appllied Science Journal.

Jakhrani, A.Q. and Othman, A.K. and Rigit, A.R.H. and Samo, S.R. (2011) Comparison of solar photovoltaic module temperature models. World Appl. Sci. J., 14. pp. 1-8.

Jakhrani, A.Q. and Othman, A.K. and Rigit, A.R.H. and Samo, S.R. (2011) Model for estimation of global solar radiation in Sarawak, Malaysia. World Applied Sciences Journal, 14. pp. 83-90. ISSN 1818-4952

K

Kabit, M.R and Charles, P. and Fereirra, L. and Hojati, A.T (2011) Examination of Traffic Incident Records and Development of a Rapid Incident Response Plan. In: Australasian Transport Research Forum 2011 Proceedings, 28-30 September 2011.

Kai, Meng Tay and Chee, Peng Lim (2011) Optimization of Gaussian Fuzzy Membership Functions and Evaluation of the Monotonicity Property of Fuzzy Inference Systems. IEEE.

Kai, M.T and Chee, P.L (2011) An Evolutionary-Based Similarity Reasoning Scheme for Monotonic Multi-Input Fuzzy Inference Systems. IEEE.

Kai, Meng Tay and Chee, Peng Lim (2011) A fuzzy inference system-based criterion-referenced assessment model. Expert Systems with Applications, 38 (9). 11129-11136..

Khalid, Muhammad and Shoaib, Muhammad and Khan, Amir Azam (2011) Strontium doped Lead Zirconate Titanate ceramics: Study of calcination and sintering process to improve piezo effect. Journal of Nanoscience and Nanotechnology, 11. pp. 5440-5445.

Khan, Amir Azam and Labbe, Jean Claude (2011) Advanced ceramic matrix composites for high energy X-ray generation. Advances in Natural Sciences, 2 (4).

Khoo, Kian Hua (2011) Design of CMOS power amplier. [Final Year Project Report] (Unpublished)

Kipli, K. and Krishnan, Shekhar and Zamhari, N. and Muhammad, M.S. and Masra, S.M.W. and Kho, Lee Chin and Lias, K. (2011) Full Reference Image Quality Metrics and their Performance. IEEE 7th International Colloquium on Signal Processing and its Applications (CSPA), 2011. ISSN Print ISBN: 978-1-61284-414-5

Kuan, H.T.N and Cantwell, W.J and Hazizan, M.D and Santulli, C. (2011) The fracture properties of environmentally-friendly fibre metal laminates. Journal of Reinforced Plastics & Composites, 30 (6). pp. 499-508.

L

Lai, Phui Hua (2011) An experimental study on foamed concrete foundation as peat soil replacement in sarawak. Masters thesis, Universiti Malaysia Sarawak, (UNIMAS).

Law, I.N. (2011) Impacts of barrage flushing and flooding-in operations on saline intrusion upstream. UNIMAS E-Journal of Civil Engineering, 2 (1).

Lim, L.L.P and Lynch, R.J (2011) Feasibility study of a photocatalytic reactor for in-situ groundwater remediation of organic compounds. Journal of Hazardous Materials, 194.

Lim, L.L.P and Lynch, R.J (2011) In-situ photocatalytic remediation of MTBE-contaminated water: effects of organics and inorganics. Applied Catalysis A: General, 394 (2). pp. 52-61.

Ling, H. and Teo, DCL (2011) Lightweight Concrete Bricks Produced from Industrial and Agricultural Solid Waste. Sustainable Technologies (WCST).

Ling, I.H and Teo, DCL (2011) Reuse of Waste Rice Husk Ash and Expanded Polystyrene Beads as an Alternative Raw Material in Lightweight Concrete Bricks. International Journal of Chemical and Environmental Engineering, 2 (5). 328-332.. ISSN 2078-0737

Low, Patrick Tiong Kie (2011) Natural Convection solar dryer with backup burner for small scale rural pepper farmers. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

M

M., O. Abdullah and Y., K. Gan and K., M.Tay and N., Julai (2011) A Multi-Purpose Mini Hybrid Fuel Cell-Battery-Solar Portable Device For Rural Applications: Laboratory Testing. International Journal of Recent Research and Applied Studies, 7 (4). pp. 390-402. ISSN 2076-7366

M. O., Abdullah and S.F., Lim and S.F., Salleh and T. M., Tai and S. L., Leo and A. K., Umar (2011) Development of a small-scale reactor system for bioethanol production from agriculture waste geared towards small industries applications in Malaysia. Renewable Energy & Power Quality Journal. ISSN 2172-038X

M.J., Pender and T.B, Algie and N.M, Sa’don and R.P, Orense (2011) Snap-Back Testing for Estimation of Nonlinear Behaviour of Shallow and Pile Foundations. In: Proceedings of the Ninth Pacific Conference on Earthquake Engineering Building an Earthquake-Resilient Society , 14-16 April, 2011.

Mah, D.Y.S. (2011) Conservation of Sarawak peat swamp in an urban landscape by fuzzy inference system. Regional Environmental Change, 11 (2). pp. 307-310. ISSN 1436-378X

Mah, D.Y.S. (2011) Modelling of sea level rise and river system. Disaster Prevention and Management, 20 (2). pp. 108-114. ISSN 0965-3562

Mah, D.Y.S. (2011) Restoring nature in engineering structure: a modelling of Kuching bypass floodway. Journal Coastal Conservation, 15 (4). 565-571 . ISSN 1874-7841

Mah, D.Y.S. and Putuhena, F.J. and Rosli, N.A (2011) Modelling of flood flushing in a tributary constrained by barrages. World Applied Sciences Journal, 23 (1). pp. 101-108. ISSN 1818-4952

Mah, Yau Seng and Frederik Josep, Putuhena and Sai, Hin Lai (2011) Modelling the flood vulnerability of deltaic Kuching City, Malaysia. Natural Hazards, 58 (3). pp. 865-875. ISSN 1573-0840

Md, Rezaur Rahman. (2011) Sustainable wood polymer composites improvement based on conventional and nanotechnological approaches. Masters thesis, Faculty of Engineering.

Min, Tian Chuan and Mohammad Iskandar, Jobli and Abu Saleh, Ahmed and Robert, Malong and Masri, Zaini and Mohammad Omar, Abdullah and Mohd Narzam, Jaffar and Mohamad Abdullah, Ali (2011) Renewable Energy Potential From Micro Hydro For Techno-Economic Uplift – A Brief Review. International Journal of Recent Research and Applied Studies, 7 (4). pp. 368-372. ISSN 2076-7366

Mohamad Iskandar, bin Jobli and Diana Kertini, binti Monir and Khoo, Kian Peng (2011) Analysis of waste thermal energy from banana peels using decomposition process for heat generation. IEEE First Conference on Clean Energy and Technology (CET), 2011. ISSN ISBN: 978-1-4577-1354-5

Mohamed, J.S.Z and Razali, I. (2011) Modified cement system : Durability and aesthetics. UNIMAS E-Journal of civil Engineering.

Mohamed, N.H.N and Juneh, H. and Yusof, M. (2011) Testing on Energy Absorption of Banana Fiber Polyester Composite.

Mohamed, N.H.N and Juneh, H. and Yusof, M. (2011) Testing on Energy Absorption of Banana Fiber Polyester Composite. Journal Applied Mechanics and Materials, 117-19. pp. 873-875.

Mohammad Omar, Abdullah and Tan, Ivy Ai Wei and Lim, Leo Sing (2011) Automobile adsorption air-conditioning system using oil palm biomass-based activated carbon: A review. Renewable and Sustainable Energy Reviews, 15. pp. 2061-2072. ISSN 1364-0321

Mohd Danial, Ibrahim and Hashimoto, Hiromu (2011) Optimum Design of Oil Lubricated Thrust Bearing for Hard Disk Drive. Selected Articles of the 2nd International Conference on Design Engineering and Science, New Progress in Design Engineering and Science. pp. 1-6.

Mohd Saufee, Muhammad and Krishna Veni, Selvan and Sharifah Masniah, Wan Masra (2011) An improved binary particle swarm optimization algorithm for DNA encoding enhancement. IEEE Symposium on Swarm Intelligence (SIS), 2011. ISSN ISBN: 978-1-61284-052-9

Muhammad Nor, Bin Hafidzi and Ahmad Kueh, Beng Hong and Norhidayah, Binti Rasin and Airil Yasreen, Bin Mohd Yassin and Hisham, Bin Mohamad (2011) Size Dependent Uniaxially Loaded Stability of Triaxial Weave Fabric Composites. Applied Mechanics and Materials, 94-96. pp. 1742-1745. ISSN 1662-7482

Muhammad Syukri, Imran (2011) Sarawak General Hospital main block building retrofit features for energy efficiency. Masters thesis, Faculty of Engineering.

N

Ngui, Jia Lin (2011) Performance investigation of a solar thermoelectric-adsorption cooling system using activated carbon-methanol. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Norazzlina, M.Sa'don and Lim, Soh Fong and Syed Tarmizi, Bin Syed Shazali and Sharifah Masniah, Wan Masra and Dygku Salma, Awg Ismail and Abdul Razak, Abdul Karim and Siti Nor Ain, Musa and Tan, Ivy Ai Wei and Wan Hashim, Wan Ibrahim and Al-Khalid, Hj Othman (2011) Accreditation Handbook. UNIMAS Publisher, Universiti Malaysia Sarawak, 94300 Kota Samarahan, Sarawak, Malaysia.. ISBN 978-967-5527-28-9

Norsuzailina, Sutan and Ehsan, Ahmed and Habibur Rahman, Sobuz (2011) Flexural performance of CFRP strengthened RC beams with different degrees of strengthening schemes. International Journal of the Physical Sciences, 6 (9). p. 2229. ISSN 1992 - 1950

Norsuzailina, Sutan and Habibur Rahman, Sobuz and Ehsan, Ahmed (2011) Deflection and cracking behavior of RC beams externally reinforced with carbon fiber laminates. Journal of Reinforced Plastics and Composites, 30 (21). pp. 1807-1818. ISSN 1530-7964

Norsuzailina, Sutan and Sinin, Hamdan and Habibur Rahman, Sobuz and Vincent Lelanggan, Laja and Md. Saiful, Islam (2011) Porosity and Strength of Pozzolan Modified Cement Systems. Concrete Research Letters, 2 (4). pp. 326-335. ISSN 2180-1371.

Nursalasawati, Binti Rusli and Ahmad Kueh, Beng Hong and Erwan Hafizi, Bin Kasiman (2011) Staggered Grid Computation of Fluid Flow with an Improved Discretisation of Finite Differencing. In: Informatics Engineering and Information Science: International Conference, ICIEIS 2011, 14-16 November 2011, Kuala Lumpur, Malaysia.

O

Olarewaju, A.J. and Rao, N.S.V.K. and Mannan, M.A. (2011) Dimensionless response of underground pipes due to blast loads using finite Element Method. Electron. J. Geotech. Eng, 16. pp. 563-574.

Oon, Y.W. and Chin, N.J. and Law, P.L (2011) Soil Erosion and Sediment Yield of a Sanitary Landfill Site - A Case Study. UNIMAS E-Journal of Civil Engineering, 2 (2).

P

P.K, Kolay and M.R, Aminur and S.N.L., Taib (2011) Effect of alkali on tropical peat stabilized with different stabilizers. International Journal of Geotechnical Engineering, 5 (2). pp. 189-197.

Pender, M.J. and Algie, Thomas and Norazzlina, M.Sa‘don and Orense, R.P (2011) Snap-Back Testing and Estimation of Parameters for Nonlinear Response of Shallow and Pile Foundations at Cohesive Soil Sites. In: 5th International Conference on Earthquake Geotechnical Engineering (5ICEGE), 10 Jan 2011 - 13 Jan 2011, Santiago, Chile.

Prashobh, Karunakaran (2011) Optimization of a Flexible Manufacturing System (FMS) for High Technology Product Producing Factory via the Modularization of Production Systems. PhD thesis, Universiti Malaysia Sarawak.

Pui, Tau Shien and H.N., Seneviratne and Dygku Salma, Awg Ismail (2011) A Study on Factors Influencing the Determination of Moisture Content of Fibrous Peat. UNIMAS E-Journal of Civil Engineering, 2 (2).

R

Rosli, M.F. and Rashidi, A. and Ahmed, E. and Sarudu, N.H. (2011) The Effect of Reinforcement, Expanded Polystyrene (EPS) and Fly Ash On The Strength of Foam Concrete. UNIMAS E-Journal of Civil Engineering, 2 (2).

S

Sabrina, Ummi (2011) Biological treatment system using coconut waste as support media for treating grey water. Masters thesis, Universiti Malaysia Sarawak.

Saleh, A.A. and Asri, M. and Sinin, Hamdan (2011) Electricity savings by implementing energy efficiency standards and labels for clothes washers in Malaysia. Journal of Engineering Science and Technology, 6 (1). pp. 29-38.

Selvan, K.V and Muhammad, M.S. and Masra, S.M.W. and Zuwairie, Ibrahim and Kian, Sheng Lim (2011) DNA Words Based on an Enhanced Algorithm of Multi-objective Particle Swarm Optimization in a Continuous Search Space. 2011 International Conference on Electrical, Control and Computer Engineering (INECCE),. ISSN Print ISBN: 978-1-61284-229-5

Shahidul, Islam and Syed Shazali, Syed Tarmiz (2011) Determinants of manufacturing productivity: Pilot study on labor-intensive industries. International Journal of Productivity and Performance Management, 60 (6). pp. 567-582. ISSN 1741-0401

Shahidul, Islam and Syed Shazali, Syed Tarmiz (2011) Dynamics of manufacturing productivity: lesson learnt from labor intensive industries. Journal of Manufacturing Technology Management, 22 (5). pp. 664-678. ISSN 1741-038X

Siti Noor Linda, Binti Taib and Kolay, Prabir K and Aminur, M.R and Mohd Zain, M. I. S. (2011) Stabilization of Tropical Peat Soil from Sarawak with Different Stabilizing Agents. Geotechnical and Geological Engineering, 29 (6). pp. 1135-1141. ISSN 1573-1529

Suk, Fun Chin and Swaminatha Iyer, K. and Raston, Colin L. (2011) Superparamagnetic core-shell nanoparticles for biomedical applications. International Conference on Enabling Science and Nanotechnology (ESciNano), 2010. ISSN ISBN: 978-1-4244-8854-4

Syazie Nordzaima, Binti Ali Mohamad. (2011) Potential And Properties Of Seawater Desalination In Pulau Salak. Masters thesis, UNIMAS.

T

Tay, J.E (2011) A study on the rainfall and landslides along Sarawak road using the antecedent rainfall analysis. UNIMAS E-Journal of Civil Engineering, 2 (1).

Teo, DCL and Ling, I.H (2011) Properties of EPS RHA lighweight concrete bricks under different curing conditions. Construction and Building Materials, 25 (8). pp. 3648-3655.

Thian, Kah Kien. (2011) An evaluation of pre-construction contract variables influencing occupational safety & health performance in Malaysian design & build and design-bid-build construction projects. Masters thesis, Universiti Malaysia Sarawak, (UNIMAS).

Tiew, KG (2011) Reducing waste disposal from Universiti Kebangsaan Malaysia campus by 2-Bins recycling system. UNIMAS E-Journal of Civil Engineering, 2 (1).

Ting, Sie Chun (2011) Post-flood forensic analysis on small urban catchment using one dimensional system modelling. Masters thesis, Universiti Malaysia Sarawak, (UNIMAS).

Tze, Ling Jee and Kai, Meng Tay and Chee, Khoon Ng (2011) Enhancing a Fuzzy Failure Mode and Effect Analysis methodology with an Analogical Reasoning Technique. Journal of Advanced Computational Intelligence, 15 (9).

U

Universiti Malaysia Sarawak, Faculty of Engineering (2011) Annual Report 2011 : Faculty of Engineering. [Report]

Universiti Malaysia Sarawak, Faculty of Engineering (2011) FENG Research Bulletin, vol. 4 2011. [Magazine and Newsletter]

V

Voon Pai, B. and Abidin, W.A.W.Z and Othman, A.K. and Zen, H. and Masri, T. (2011) Characteristic of mobile satellite l-band signal in mid-latitude region:GPS approach. Indian Journal of Radio & Space Physics, 40 (2). pp. 105-112. ISSN 0975-105X (Online)

Voon Pai, B. and Abidin, W.A.W.Z and Zen, H. and Masri, T. and Abdullah, M. (2011) Open Space Mathematical Model for the Mobile Satellite L-Band Signal in Sarawak using Global Positioning System Technology. IEEE International Conference on Space Science and Communication (IconSpace), 2011. ISSN ISBN: 978-1-4577-0564-9

Y

Yiau, S.S. and F.J., Putuhena (2011) Probable Maximum Precipitation (PMP) Analysis for Bakun Dam Area. UNIMAS E-Journal of Civil Engineering, 2 (2).

Yusof, M. and James Ujai, S.J. and Sahari, F. and Taib, S.N.L. and Noor Mohamed, N.H. (2011) Application of Clam (lokan) Shell as Beach Retaining Wall. In: Proceedings of EnCon 2011, 4th Engineering Conference, Kuching Sarawak.

This list was generated on Wed Sep 29 06:06:59 2021 +08.