Items where Division is "Academic Faculties, Institutes and Centres > Faculty of Engineering
Faculties, Institutes, Centres > Faculty of Engineering" and Year is 2010

Article

A. S., Ahmed and S., Khan and S., Hamdan and R., Rahman and A., Kalam and H.H., Masjuki and T.M.I., Mahlia (2010) Biodiesel Production from Macro Algae as a Green Fuel for Diesel Engine. Journal of Energy & Environment, 2 (1). pp. 1-5. ISSN 0958305X

Abba, I. and Abidin, W.A.W.Z and Bong, V.P. and Othman, A.K. and Hong Ping, Kismet (2010) Open Space Experimental Work for L-Band Mobile Satellite (MS) using a Simple and Low Cost Data Acquisition System. International Conference on Computer and Communication Engineering (ICCCE), 2010. ISSN ISBN: 978-1-4244-6235-3

Abdullah, M.O and Yek, P.N.Y and Hamdan, S. and Junaidi, E. and Kuek, P. (2010) An Airboat For Rural Riverine Transportation and Mangrove Marine Environment Applications. International Journal of Recent Research and Applied Studies, 2 (3). pp. 211-222. ISSN 2076-7366

Abidin, W.A.W.Z and Othman, A.K. and Hong Ping, Kismet and Masri, T. and Zamhari, N. (2010) Design and Development of Cost-Effective Automatic Location Identification for Campus Monitoring. 8th Asia-Pacific Symposium on Information and Telecommunication Technologies (APSITT), 2010. ISSN ISBN: 978-4-88552-244-4

Abu Saleh, Ahmed and M.A., Alam and A., Piee and M.R., Rahman and S., Hamdan (2010) Study of physical and mechanical properties of oil palm empty fruit bunch fiber reinforced polypropylene composites. Journal of Energy & Environment, 2 (1). pp. 16-21. ISSN 0958305X

Abu Saleh, Ahmed and Sinin, Hamdan and M.R, Rahman and N, Annaluru and S, Watanabe and T, Kodaki and K., Makino (2010) Conversion of Waste Agriculture Biomass to Bioethanol by Recombinant Saccharomyces cerevisiae. Journal of Scientific Research, 2 (2). pp. 351-361. ISSN 2070-0245

Ain, M.F. and Ahmad, Z.A. and Othman, M.A. and Zubir, I.A. and Hutagalung, S.D. and Sulaiman, A. A. and Othman, A.K. (2010) Quarter Wavelength Matching in Dielectric Resonator Bandpass Filter. IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE), 2010. ISSN ISBN : 978-1-4244-8566-6

Ain, M.F. and Ahmad, Z.A. and Othman, M.A. and Zubir, I.A. and Hutagalung, S.D. and Sulaiman, A. A. and Othman, A.K. (2010) X-Band Dielectric Resonator Bandpass Filter. 2010 International Conference on Computer Applications and Industrial Electronics (ICCAIE). ISSN 978-1-4244-9055-4 (online)

Amin, Heidarpour and Abdul Azim, Abdullah and Mark A., Bradford (2010) Non-linear thermoelastic analysis of steel arch members subjected to fire. Fire Safety Journal, 45 (3). pp. 183-192. ISSN 0379-7112

Andrew Ragai, Henry Rigit and Lai, Koon Chun and Bong, David B L (2010) Electrical Performance Evaluations for a Dielectric Barrier Discharge Plasma Actuator. IEEE Conference on Electrical Insulation and Dielectric Phenomena, 2009. CEIDP '09. ISSN 0084-9162

Bong, Charles Hin Joo and Ayob, Katimon (2010) Non-Darcian Transmission of Water Properties in Malaysian Peat Soil. The IUP Journal of Soil and Water Science (India), 3 (2). pp. 40-54. ISSN 0974-6560

Bong, J.H.L (2010) Study the Structural Behaviour of Ferrocement Beam. UNIMAS e-Journal of Civil Engineering, 1 (2).

Bong, V.P. and Abidin, W.A.W.Z and Abba, I. and Othman, A.K. and Zen, H. and Masri, T. (2010) A Simple and Cost Effective Data Acquisition System for Mobile Satellite Experimental Work under Treeshadowed and Building-shadowed. International Conference on Computer and Communication Engineering (ICCCE), 2010. ISSN ISBN: 978-1-4244-6235-3

Dayang Azra, Awang Mat and Kho, Franky and Joseph, A. and Kipli, K. and Sahrani, S. and Lias, K. and Ade Syaheda Wani, Marzuki (2010) The Effect of Headset and Earphone on Reducing Electromagnetic Radiation from Mobile Phone toward Human Head. 8th Asia-Pacific Symposium on Information and Telecommunication Technologies (APSITT), 2010. ISSN Print ISBN: 978-1-4244-6413-5

Dayang Azra, Awang Mat and Kho, Franky and Joseph, Annie and Kuryati, Kipli and Shafrida, Sahrani and Kasumawati, Lias and Ade Syaheda Wani, Marzuki (2010) Electromagnetic Radiation from Mobile Phone near Ear-skull Region. International Conference on Computer and Communication Engineering (ICCCE), 2010. ISSN ISBN: 978-1-4244-6235-3

Emiliani, Geliga and Dayangku Salma, Awang Ismail (2010) Geotechnical Properties of Fly Ash and its Application onSoft Soil Stabilization. UNIMAS E-Journal of Civil Engineering, 1 (2).

Ibrahim, M.D and Namba, T. and Ochiai, M. and Hashimoto, H. (2010) Optimum design of thrust air bearing for hard disk drive spindle motor. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 4 (1). pp. 70-81. ISSN 1881-3054

Jakhrani, A.Q. and Othman, A.K. and Andrew Ragai, Henry Rigit and Samo, S.R. (2010) A simple method for the estimation of global solar radiation from sunshine hours and other meteorological parameters. IEEE International Conference on Sustainable Energy Technologies (ICSET), 2010. ISSN 2165-4395

Jupiter, T. and Hj Rashidi, A. and Ismail, I. (2010) Effect of seawater on the properties of Epoxy Modified Concrete. UNIMAS E-Journal of Civil Engineering, 1 (2).

Kasumawati, Lias and Abidin, W.A.W.Z and Masri, T. and Othman, A.K. and Ade Syaheda Wani, Marzuki and Dayang Azra, Awang Mat and Kuryati, Kipli (2010) 900MHz and 1800MHz Mobile Phone Effect Towards Adult Head in SAR Distribution and SAR in Weight. IEEE International Conference on Systems Man and Cybernetics (SMC), 2010. ISSN 1062-922X

Kolay, P.K and Pui, M.P (2010) Peat Stabilization using Gypsum and Fly Ash. UNIMAS E-Journal of Civil Engineering, 1 (2).

Law, Puong Ling and Ngu, Lock Hei and Wong, Kien Kuok and Yusof, A. A.R (2010) Oil droplets and solid particles removal using circular separator with inclined coalescence mediums : comparison between co-current and counter-current flow. Water science and technology, 62 (5). pp. 1129-1135. ISSN 1996-9732

Lik, Leonard Pueh Lim and Lynch, Rod (2010) Hydraulic performance of a proposed in-situ photocatalytic reactor for degradation of MTBE in water. Chemosphere, 82 (4).

Luca, Manica and Giacomo, Oliveri and Takashu, Takenaka and Kismet, Hong-Ping and Toshifumi, Moriyama and Andrea, Massa (2010) Time-Domain Inversion with the IMSA-FBTS Approach. Annual Review of Progress in Applied Computational Electromagnetics. pp. 793-797.

M.D, Yusoff and N.I, Monieur and G.D, Airey (2010) The 2S2P1D - An Excellent Linear Viscoelastic Model. UNIMAS e-Journal of Civil Engineering, 1 (2).

M.O., Abdullah and V.C., Yung and A.K., Othman and K.B. Ab. Hamid, Ab. Hamid and J., Tarawe (2010) Review and comparison study of hybrid diesel/solar/hydro/fuel cell energy schemes for a rural ICT Telecenter. Energy, 35 (2). pp. 639-646. ISSN 0360-5442

Mat, D.A.A. and Franky, W.T. and Kipli, K. and Joseph, A. and Sahrani, S. and Lias, K. and Suhaili, S. (2010) Electromagnetic radiation towards adult human head from 900MHz handheld mobile phone. IEEE 9th Malaysia International Conference on Communications (MICC), 2009. ISSN Print ISBN: 978-1-4244-5531-7

Md. Rezaur, Rahman and Md. Nazrul, Islam and Md. Monimul, Huque and Sinin, Hamdan and Abu Saleh, Ahmed (2010) Effect Of Chemical Treatment On Rice Husk (RH) Reinforced Polyethylene (PE) Composites. BioResources, 5 (2). pp. 854-869. ISSN 1930-2126

Md. Rezaur, Rahman and Sinin, Hamdan and Abu Saleh, Ahmed and Md. Saiful, Islam (2010) Mechanical And Biological Performance Of Sodium Metaperiodate-Impregnated Plasticized Wood (Pw). BioResources, 5 (2). pp. 1022-1035. ISSN 1930-2126

Mohammad, Abdul Mannan and Teo, Delsye Ching Lee and Kurian, V. J. (2010) Durability of lightweight OPS concrete under different curing conditions. Materials and Structures, 43 (1). pp. 1-13. ISSN 1871-6873

Mohammad Omar, Abdullah and Tang, Chung Hieng (2010) Comparative analysis of performance and techno-economics for a H2O–NH3–H2 absorption refrigerator driven by different energy sources. Applied Energy, 87. pp. 1535-1545. ISSN 0306-2619

Mohd Danial, Ibrahim and Namba, Tadashi and Ochiai, Masayuki and Hashimoto, Hiromu (2010) Optimum Design of Thrust Air Bearing for Hard Disk Drive Spindle Motor. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 4 (1). pp. 70-81. ISSN 1884-8354

Mohd Razip, Asaruddin and Habibah, A Wahab and Nornisah, Mohamed and Fun, Hoong-Kun (2010) 2-Amino-4,6-dimethylpyridinium benzoate. Acta Crystallographica Section E Structure Reports Online, 66 (10). ISSN 1600-5368

Mohd Razip, Asaruddin and Habibah, A Wahab and Nornisah, Mohamed and Fun, Hoong-Kun (2010) 4-(3,4-Dimethyl-5-phenyl-1,3-oxazolidin-2-yl)-2-methoxyphenol. Acta Crystallographica Section E Structure Reports Online, 66 (6). ISSN 1600-5368

Muhammad, M.S. and Masra, S.M.W. and Kipli, K. and Zamhari, N. (2010) A simulation software for DNA computing algorithms implementation. International Science Index, Computer and Information Engineering, 4 (12). ISSN 2409-0441

Noor, N.M and Yahaya, N. and Ozman, N.A.N and Othman, S.R (2010) The Forecasting Residual Life of Corroding Pipeline based on Semi-Probabilistic Method. UNIMAS e-Journal of Civil Engineering, 1 (2).

Nyambar, S. (2010) Long Storage as Water Source during Dry Period for Sarawak River Basin. UNIMAS E-Journal of Civil Engineering, 1 (2).

Othman, A.K. and Wan Zainal Abidin, W.A and Zen, H. and Hong Ping, Kismet Anak and Zamhari, N. (2010) Performance Evaluation for Network Set up and Nodes Discovery Protocol in Underwater Grid Topology Networks. 8th Asia-Pacific Symposium on Information and Telecommunication Technologies (APSITT), 2010. ISSN ISBN: 978-4-88552-244-4

Sabri, M.F.M. and Husin, M.H. and Chai, S.K. (2010) Development of a Timetabling Software Using Soft-computing Techniques With a Case Study. The 2nd International Conference on Computer and Automation Engineering (ICCAE), 2010. ISSN ISBN: 978-1-4244-5586-7

Sharifah Masniah, Wan Masra and Muhammad, M.S. and Sapawi, R. (2010) The effect of input limiting on linear and nonlinear filters for the removal of impulsive noise. IEEE International Conference on Signal and Image Processing Applications (ICSIPA), 2009. ISSN Print ISBN: 978-1-4244-5560-7

Taib, S.N.L. (2010) A Review of Soil Nailing Design Approaches. UNIMAS E-Journal of Civil Engineering, 1 (2).

Tay, K.M and Lim, C.P (2010) On the Use of Fuzzy Inference systems for assessment and decision making problems. Handbook on Decision Making, 4. pp. 233-246.

Tengku Mohd Afendi, Zulcaffle and Othman, A.K. and Abidin, W.A.W.Z and Shahrol, Mohamaddan and Ade Syaheda Wani, Marzuki (2010) A Thresholding Algorithm for Text/Background Segmentation in Degraded Handwritten Jawi Documents. Second International Conference on Advances in Computing, Control and Telecommunication Technologies (ACT), 2010. ISSN ISBN: 978-1-4244-8746-2

Zhe Huei, Ling and Sim Nee, Ting (2010) Time Provisions in Standard Forms of Local and International Construction Contract. UNIMAS E-Journal of Civil Engineering, 1 (2). pp. 1-7. ISSN 2462-1382

Book

Universiti Malaysia Sarawak, Faculty of Engineering (2010) Innovation and advances in solid state science and technology 1-2 December 2010 (Programme Book). Universiti Malaysia Sarawak, (UNIMAS).

Universiti Malaysia Sarawak, Fakulti Kejuruteraan (2010) Buku panduan pelajar: Fakulti Kejuruteraan sesi 2010/2011. Universiti Malaysia Sarawak, (UNIMAS).

Book Chapter

Abdul Razak, Abdul Karim and Quenneville, Pierre and Norazzlina, M.Sa‘don and Ingham, Jason M. (2010) Assessing the Bolted Connection Strength of New Zealand Hardwood. In: New Zealand Society for Earthquake Engineering Conference (NZSEE 2010). New Zealand Society for Earthquake Engineering, pp. 1-9.

Final Year Project Report

Ainur Idayu, Binti Tumingan. (2010) Multimodal biometrics technique for personal authentication. [Final Year Project Report] (Unpublished)

Akmal Hisyam, Bin Ruduan @ Raduan. (2010) Sustainable Utilisation of Metroxylon Sago Plantation Biomass Wastes as Binding Agent for Pelletisation. [Final Year Project Report] (Unpublished)

Albern, Anak Tomek (2010) Feasibility study of sustainable pellet - gasification - power generation in Sarawak rural areas. [Final Year Project Report] (Unpublished)

Alice Edwina, ak Nyudien (2010) A study of problems associated with field measurement of moisture content of peat. [Final Year Project Report] (Unpublished)

Amanda, anak Mangan. (2010) A case study of preloading in peat using finite element method with plaxis software. [Final Year Project Report] (Unpublished)

Amirul Ariffin, Bin Kassim (2010) Study on effect of window grilles for safety purposes on heat transfer in a building. [Final Year Project Report] (Unpublished)

Anuar, Ibrahim. (2010) Engineering properties of residual soils. [Final Year Project Report] (Unpublished)

Awai, D. (2010) Study the effect of ionosphere on the received mobile satellite signal using low-power gps receiver. [Final Year Project Report] (Unpublished)

Awang Firdaus, Bin Awang Aemeran (2010) Open channel flow through unsubmerged rigid vegetation. [Final Year Project Report] (Unpublished)

Azizah Ummira, Bt. Hj Abot (2010) Comparison of marshall mix properties between normal acw14 hot mix asphalt mixture and acw14 with carbide lime as filler replacement materia. [Final Year Project Report] (Unpublished)

Beatrice, Anak No'eh (2010) Mobile satellite open space empirical data modeling. [Final Year Project Report] (Unpublished)

Bong, Benjamin Lip Jin. (2010) A cross sectional study on performance assessment on Kuching manufacturing industries : a time series analysis. [Final Year Project Report] (Unpublished)

Bong, Mei Lun. (2010) Effect of compressive stress in concrete on ultrasonic pulse velocity with different aspect ratios. [Final Year Project Report] (Unpublished)

Chai, C.H (2010) Design a high performance absorber to improve an anechoic chamber performance. [Final Year Project Report] (Unpublished)

Chai, Koh Kiong. (2010) Design and development of a photovoltaic (PV) system with a sun tracker. [Final Year Project Report] (Unpublished)

Chan, C.H (2010) Study of distributed coordination function (DCF) and enhanced dcf (EDCF) in IEEE 802.11 MAC protocols for multimedia applications. [Final Year Project Report] (Unpublished)

Cheong, W.L (2010) Image processing for robot vision application using matlab. [Final Year Project Report] (Unpublished)

Chiew, Vincent Kee Chuong (2010) Determination of the most polluted river in an oil palm plantation in samarahan divison using composite programming method. [Final Year Project Report] (Unpublished)

Chong, Chooi Yeng. (2010) Effect of compressive stress in concrete on ultrasonic pulse velocity. [Final Year Project Report] (Unpublished)

Chong, Y.F (2010) Facial expression classification. [Final Year Project Report] (Unpublished)

Chua, Jeremy Tzuu Shyan (2010) Study of current problems with river transport facilities :Kuching express boat passenger terminal. [Final Year Project Report] (Unpublished)

Chua, S.N (2010) Design of an ehd pump for microfluids application. [Final Year Project Report] (Unpublished)

Chung, Mui Zhi (2010) Development of ultra high strength concrete based on locally available materials and fly ash. [Final Year Project Report] (Unpublished)

Chung, Yun Lee (2010) Effects of vibration on suspended solids - saline water separation. [Final Year Project Report] (Unpublished)

Dzufi Iszafawaty, Bt. Ispawi (2010) Parametric study of slope stability using plaxis software. [Final Year Project Report] (Unpublished)

Elamaaran, A/L Supermanian (2010) Effect of vibration on oil - water in droplets separation. [Final Year Project Report] (Unpublished)

Fauziliana, Binti Osman (2010) Development of shape pattern recognition for fpga-based embbeded object tracking system. [Final Year Project Report] (Unpublished)

Fedilis Ann, Anak Dizer (2010) Analysis of critical factors affecting level of service at traffic light junction. [Final Year Project Report] (Unpublished)

Franklin, Simon (2010) Risk assessment for river transport Kuching express boat passenger terminal (maintenance & utilization). [Final Year Project Report] (Unpublished)

Gabriel Stotoh, Ak Gingos (2010) Absorption factor of mortar. [Final Year Project Report] (Unpublished)

Ghazali, Bin Ahmad (2010) Performance of profiled steel sheet dry board panel (PSSDB) against flexural and vibration. [Final Year Project Report] (Unpublished)

Hafiza, Binti Ramji (2010) Effect of cutting fluid on surface roughness in turning operation. [Final Year Project Report] (Unpublished)

Han, N.T.H (2010) Waste thermal heat pump. [Final Year Project Report] (Unpublished)

Hanafiyah, Bin Othman (2010) Study on effect of insulation of wall to the building energy efficiency in hot and humid climate. [Final Year Project Report] (Unpublished)

Henrietta Ramus, Anak Henry Makim (2010) The evaluation of marshall properties of oil palm fly ash (OPFASH) as a filler material in acw 20 hot mix asphalt (HMA). [Final Year Project Report] (Unpublished)

Ho, Kui Hua. (2010) Pavement mix design alternative use of waste product as filler material. [Final Year Project Report] (Unpublished)

Ho,, Chun Han. (2010) Standard form of construction contract :a study of the application of federation internationale des ingeieurs-conseils (FIDIC) in Malaysia. [Final Year Project Report] (Unpublished)

Houghton, Anak Eddie. (2010) Study on the effects of calcium carbonate on the mechanical properties of porous clay brick. [Final Year Project Report] (Unpublished)

Jasmine, Anak John (2010) Disposal method for solid waste produced in rural area. [Final Year Project Report] (Unpublished)

Jong, Ho Sing. (2010) Durability properties of recycled aggregate concrete. [Final Year Project Report] (Unpublished)

Jong, Shin Poh (2010) Effects of vibration on removal of solid particles from waste water. [Final Year Project Report] (Unpublished)

Jong, Swee Lek (2010) Modeling operation of flood diversion barrage in conjuction with Kuching barrage for flood mitigation. [Final Year Project Report] (Unpublished)

Julian, Gabriel Bain (2010) Effect of surcharge on stabilized peat soil from Sarawak. [Final Year Project Report] (Unpublished)

Justin, anak James (2010) The design of optimum inverter. [Final Year Project Report] (Unpublished)

Khairul Anwar, Zukiflee (2010) Creep and shrinkage deformation of frp sheet strengthened reinforced concrete beam. [Final Year Project Report] (Unpublished)

Kho, Brandon Chin Kheng. (2010) Design of cylindrical solar water heater using aluminim as solar collector. [Final Year Project Report] (Unpublished)

Kho, Kenneth Wee Hong (2010) Calcium carbide waste (CCW) as cement replacement in concrete. [Final Year Project Report] (Unpublished)

Kho, Wendy Choon Yen. (2010) Computer simulation of building for lateral loading using css software. [Final Year Project Report] (Unpublished)

Khor, J.A (2010) The effect of green roof technology and conventional zinc roof to different building materials in tropical climate. [Final Year Project Report] (Unpublished)

Khor, Jo Anne (2010) The effect of green roof technology and conventional zing roof to different building materials in tropical climate. [Final Year Project Report] (Unpublished)

Kua, Ming Sheng (2010) Development of a small microbial fuel cell plant for wastewater treatment. [Final Year Project Report] (Unpublished)

Latit, D.K (2010) Mechanical properties on bamboo. [Final Year Project Report] (Unpublished)

Lau, Sie Huang. (2010) Design of the micro hydro power reservoir at kpg semulong ulu. [Final Year Project Report] (Unpublished)

Lee, L.W (2010) Performance analysis on handover for wlan 802.11b. [Final Year Project Report] (Unpublished)

Liew, Hon Choi (2010) Energy efficient electronic blind system for home windows. [Final Year Project Report] (Unpublished)

Liew, Yu Voon (2010) Long term deflection and cracking performance of palm shell aggregate concrete beam subjected to transverse loading. [Final Year Project Report] (Unpublished)

M.Syahrul Faiz, Abd Manan (2010) Mobile rfid tracking system : software architecture. [Final Year Project Report] (Unpublished)

Mah, Kar Weng (2010) Case Study: Design and Development of Pico Hydro Power System for Underserved Community in Kampung Semulong Ulu. [Final Year Project Report] (Unpublished)

Mah, Kar Weng (2010) Case study : design and development of pico hydro power system for underserved community in kampung semulong ulu. [Final Year Project Report] (Unpublished)

Maniyan, S/O Rama (2010) Leaching studies of pulverised fuel ash from local thermal power plant. [Final Year Project Report] (Unpublished)

Maqueline Cyndi, Anak Nap (2010) Parametric study of retaining wall using plaxis. [Final Year Project Report] (Unpublished)

Maxwel Budith, Anak Mogun. (2010) Mechanical properties of banana fiber reinforced composite. [Final Year Project Report] (Unpublished)

Melissa, Anak Diman (2010) Sediment yield accumulation at reservoir (Bengoh Dam). [Final Year Project Report] (Unpublished)

Mohammad Hidayat, Bin Isa (2010) Pavement crack identification. [Final Year Project Report] (Unpublished)

Mohd Azkarmin, Mohd Adenan (2010) Development of temporal rainfall patterns for Sabah and Sarawak. [Final Year Project Report] (Unpublished)

Mohd Hazrul Azli, Abu Bakar (2010) Design and fabrication of rice milling machine for paddy farmers at Samarahan, Sarawak. [Final Year Project Report] (Unpublished)

Mok, Y.L (2010) Video distortion measurement using psnr in wavelet domain. [Final Year Project Report] (Unpublished)

Muhammad Ikram, Bin Uzir Abdul Wahab. (2010) Effect of compaction energy on engineering characteristic of compacted soil. [Final Year Project Report] (Unpublished)

Muhammad Noor Hisyam, Abg Hashim (2010) Water level predictio for Limbang basin using multilayer perceptron (mlp) and radial basis function (rbf) neural network. [Final Year Project Report] (Unpublished)

Nasphia, Kuyun. (2010) Barriers to working mother's career progression of government sector in Kuching : the moderating role of perceived organizational support (POS). [Final Year Project Report] (Unpublished)

Nasyitah, Binti Ahmad Kamal. (2010) 900mhz and 1800mhz mobile phone simulation with human head and hand model. [Final Year Project Report] (Unpublished)

Nazurah Zahidah, Binti Umar Baki (2010) Comparison of rheological properties between plastic modified bitumen and normal bitumen. [Final Year Project Report] (Unpublished)

Ng, A.S.L (2010) Blur assessment using edge information. [Final Year Project Report] (Unpublished)

Ng, M.C.H (2010) Evaluation of peat soils as an alternative fuel. [Final Year Project Report] (Unpublished)

Ng, Wan Chi (2010) Development of ultra high strength concrete based on locally available materials and silica fume. [Final Year Project Report] (Unpublished)

Ngu, S.H (2010) Study of biodiesel production from macroalgae in Sarawak. [Final Year Project Report] (Unpublished)

Nor Rashekar, Binti Abdul Halim (2010) Development of finger rehabilitation device for post-stroke patient. [Final Year Project Report] (Unpublished)

Norpatimah, Binti Matden (2010) Climate change exploration in Asajaya scheme. [Final Year Project Report] (Unpublished)

Norzatul Hajar, Abd Majid (2010) Soft computing approach for solving elevator scheduling problem. [Final Year Project Report] (Unpublished)

Nur Misuari, Bin Hamdi. (2010) Design of cylindrical solar water heater (SWH) using copper as solar collector. [Final Year Project Report] (Unpublished)

Nuraini, Binti Kadir. (2010) Ultrasonic measurement in ferrous metal. [Final Year Project Report] (Unpublished)

Nurul Huda, Binti Zulkifli. (2010) Design of low voltage cmos tristate buffer. [Final Year Project Report] (Unpublished)

Oh, Chin Phang (2010) In depth study of Malaysian standard form of construction contracts. [Final Year Project Report] (Unpublished)

Ooi, Y.M (2010) Conceptual axiomatic design on ergonomic electric scooter. [Final Year Project Report] (Unpublished)

Padiel, H. (2010) Cross-linked chitosan-sago composite membrane for direct methanol fuel cell application. [Final Year Project Report] (Unpublished)

Paimin, Razis (2010) Radiation emission from video display terminals. [Final Year Project Report] (Unpublished)

Paul Marcos, Aeron (2010) Cooling system for kampung house. [Final Year Project Report] (Unpublished)

Punitha, Subbramaniam (2010) Performance of real time traffic in the ethernet and wlan using tcp and udp protocols. [Final Year Project Report] (Unpublished)

Ratchel, Anak Edward. (2010) Electricity savings by implementing energy efficiency standards and labels for household air conditioners in Malaysia. [Final Year Project Report] (Unpublished)

Roziana, Binti Che Musa (2010) Comparison of theoretical total electron content (TEC) during disturbance. [Final Year Project Report] (Unpublished)

Ryan, Hardin (2010) Hydraulic model of dam bengoh for flood mitigation in Sarawak kiri river. [Final Year Project Report] (Unpublished)

Salam, M.H (2010) Performance simulation of micro hydropower system. [Final Year Project Report] (Unpublished)

Samson (2010) Investigation of water infliltration effect on unsaturated soil slope. [Final Year Project Report] (Unpublished)

Selvam, R. (2010) Fabrication and testing of bagasse particle reinforced biocomposite. [Final Year Project Report] (Unpublished)

Siti Rahimah, Abd Rahim (2010) License plate recognition of moving vehicles. [Final Year Project Report] (Unpublished)

Sng, Wei Sze (2010) Relationship between strength and physical properties of acacia mangium timber in Sarawak. [Final Year Project Report] (Unpublished)

Song, A.H.B (2010) Design of micro-hydropower system for a stand alone rural village electrification. [Final Year Project Report] (Unpublished)

Song, Alphonsus Hua Bing (2010) Design of micro-hydropower system for a stand alone rural village electrification. [Final Year Project Report] (Unpublished)

Su, M.C.H (2010) Prospect of biodiesel production from waste oil and fat in Malaysia. [Final Year Project Report] (Unpublished)

Suhaila, Bt. Mahamod (2010) Modelling of the operations of flood diversion barrage during dry season. [Final Year Project Report] (Unpublished)

Sylvester Usan, Ak Matu (2010) Utilization of agro-waste to produce biofertilizer. [Final Year Project Report] (Unpublished)

Tan, Kok Chuan (2010) Evaluation of bitumen modified properties by adding up carbide lime as an addictive material. [Final Year Project Report] (Unpublished)

Tan,, Swee Yen (2010) Distribution of shear stress in smooth rectangular open channel. [Final Year Project Report] (Unpublished)

Tharanitharan Asoge, Sugumaran (2010) Utilization of agro waste to produce biosorbent. [Final Year Project Report] (Unpublished)

Ting, S.C (2010) Face detection approach for video surveillance. [Final Year Project Report] (Unpublished)

Ting, Sing Chung. (2010) Face detection approach for video surveillance. [Final Year Project Report] (Unpublished)

Tiong, Collin Inn Seng. (2010) Durability properties of concrete with oil palm shell (OPS) aggregates. [Final Year Project Report] (Unpublished)

Tiong, I.H (2010) Designing a pepper harvester end effector. [Final Year Project Report] (Unpublished)

Uh, Chee Siang (2010) Development of finger rehabilitation device for post-stroke patient. [Final Year Project Report] (Unpublished)

Voon, Choon Siong (2010) Experimental evaluation of the effect of embedded insulating material and layered zone under roofing system. [Final Year Project Report] (Unpublished)

Voon, Peter (2010) Comparison of parallel prefix adder (PPA). [Final Year Project Report] (Unpublished)

Wan Khairul Anwar, Bin Wan Md Marzuki (2010) Ultra wide band antenna with electromagnetic band gap structure. [Final Year Project Report] (Unpublished)

Wong, Kiew Chin (2010) Diesel - saline water separation by coalescence plate. [Final Year Project Report] (Unpublished)

Wong, Siang Long (2010) Comparison of physical and strength properties for different age group of shorea macrophylla in Sarawak. [Final Year Project Report] (Unpublished)

Wong, Timothy Leong Urn (2010) Sources of risk and related effects in the Malaysian construction industry. [Final Year Project Report] (Unpublished)

Wong, Yit Sen (2010) Design and development of micro hydro power at kampung semulong ulu (environmental impacts and social-economic impacts). [Final Year Project Report] (Unpublished)

Yeo, C.C (2010) Mechanical testing on welded pipes. [Final Year Project Report] (Unpublished)

Yogeswaran, A/L Doraisingam. (2010) Study of conversion of woody biomass to fuel. [Final Year Project Report] (Unpublished)

Yogetasri, A/P Jeyapalan (2010) Preparation and characterization of zirconium based magnetic particles. [Final Year Project Report] (Unpublished)

Yong, Shirley Xiao Wei (2010) Artificial neural network (ANN) modeling & validation to predict compression index of tropical soft soil. [Final Year Project Report] (Unpublished)

Yu, Ka Chai. (2010) Performances analysis of voip over 802.11b and 802.11e wlans using different voip codes. [Final Year Project Report] (Unpublished)

Magazine and Newsletter

Universiti Malaysia Sarawak, Faculty of Engineering (2010) FENG Research Bulletin – volume 3 : April 2010. [Magazine and Newsletter]

Newspaper Cutting

Berita Harian (2010) Unimas harap jumlah peruntukan R&D kekal. [Newspaper Cutting] (In Press)

Berita Harian (2010) 50 sertai bengkel projek 1nita dua hari. [Newspaper Cutting] (In Press)

Proceeding

Adnan, Shahid Khan and Norsheila, Fisal and Mazlina, Esa and Sharifah, Kamilah and Sharifah, Hafizah and M., Abbas (2010) An Improved Authentication Key Management Scheme for Multihop Relay in IEEE 802.16m Networks. In: Proceedings of 2010 IEEE Conference on Applied Electromagnetics (APACE 2010), 9-11 November 2010, Port Dickson.

Ahmed, Musse Mohamud (2010) New Supervisory Control and Data Acquisition (SCADA) Based Fault Isolation System for Low Voltage Distribution Systems. In: International Conference on Computer and Communication Engineering (ICCCE 2010), 11-13 May 2010, Kuala Lumpur, Malaysia.

Kismet, Hong Ping and Takenaka, Takashi and Moriyama, Toshifumi and Yamasaki, Takafumi (2010) Microwave Breast Imaging by the Filtered ForwardBackward Time-Stepping Method. In: URSI International Symposium on Electromagnetic Theory, 16-19 August 2010, Berlin, Germany.

Mohd Danial, Bin Ibrahim and Hashimoto, Hiromu (2010) Optimum Design of Thrust Oil Bearing for Hard Disk Drive. In: Proceedings of the 2nd International Conference on Design Engineering and Science, ICDES 2010, 17- 19 November 2010, Tokyo, Japan.

Mohd Danial, Bin Ibrahim and Sunami, Yuta and Ochiai, Masayuki and Hashimoto, Hiromu (2010) Measurements of Film Thickness and Pressure Distribution for Optimized Thrust Air Bearing. In: Proceedings of the 2nd International Conference on Design Engineering and Science, ICDES 2010, 17 - 19 November 2010, Tokyo, Japan.

Namba, T. and Ibrahim, M.D and Hashimoto, Hiromu (2010) Optimum Design of Groove Geometry for Thrust Bearing with Weight Factor Consideration. In: Japanese Society of Tribologists, Tribology Conference 2010, 17-19 May 2010, Tokyo, Japan.

Norazzlina, M.Sa'don and Anas, Ibrahim and Orense, R.P and Pender, M.J. (2010) Initial Shear Modulus of Auckland Residual Soil From Field and Laboratory Tests. In: 7th International Conference on Urban Earthquake Engineering (7CUEE) & 5th International Conference on Earthquake Engineering (5ICEE), 3 Mar 2010 - 5 April 2009, Tokyo Institute of Technology, Tokyo.

Norazzlina, M.Sa’don and Pender, M.J. and Orense, R.P and Abdul Razak, Abdul Karim (2010) Dynamic Field Tests of Single Piles. In: 2010 New Zealand Society for Earthquake Engineering (NZSEE), 26 Mar 2010 - 28 Mar 2010, Wellington, New Zealand.

Siti Noor Linda, Binti Taib and Kolay, Prabir K and Mohd Rahman, Aminur and Mohd Zain, M. I. S. (2010) Correlation Between Different Physical and Engineering Properties of Tropical Peat Soils from Sarawak. In: GeoShanghai International Conference 2010, 2010, Shanghai, China.

Thesis

Hii, Ching Poon (2010) Floodplain and hydraulic infrastructure system modeling for integrated flood management. PhD thesis, Universiti Malaysia Sarawak, (UNIMAS).

Lau, See Hung (2010) Particle Image Velocimetry Analysis On Simple Soil-Structured Interaction. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Md. Aminur, Rahman (2010) Stabilization of Sarawak peat by different types of stabilizer. Masters thesis, Universiti Malaysia Sarawak, (UNIMAS).

Nurafina, binti Safri (2010) Effect of internal shading devices towards building energy efficiency in hot and humid climate. Masters thesis, Universiti Malaysia Sarawak, (UNIMAS).

Tang, Chung Hieng. (2010) Performance study of an absorption cooling system under different energy sources. Masters thesis, Universiti Malaysia Sarawak, (UNIMAS).

Thye, Hun Shen (2010) Analysis and modelling of cyclic loading power transformer. Masters thesis, Universiti Malaysia Sarawak, (UNIMAS).