Items where Division is "Academic Faculties, Institutes and Centres > Faculty of Engineering
Faculties, Institutes, Centres > Faculty of Engineering" and Year is 2002

Article

B. J., Azzopardi and K., Sanaullah (2002) Re-entrainment in wave-plate mist eliminators. Chemical Engineering Science, 57. pp. 3557-3563. ISSN 0009-2509

Sim, Poh Ching and Chin, Kui Fern and Suaidi, M.K (2002) Evolution of the Boolean function manipulation. Student Conference on Research and Development, 2002. SCOReD 2002. ISSN ISBN: 0-7803-7565-3

Final Year Project Report

Abdul Gani, Haji Abd. Rahman. (2002) Relationship between surface finish and chips. [Final Year Project Report] (Unpublished)

Abdullah, Ali (2002) Laser gun system :measurement and comparison. [Final Year Project Report] (Unpublished)

Awang Masri, A.A (2002) A study on thermal management in electronic packaging components. [Final Year Project Report] (Unpublished)

Azuan, Abu Talib (2002) Health and safety risk assessment in palm oil industry. [Final Year Project Report] (Unpublished)

Bala, Anak Gansa. (2002) The effect of spindle speed, feed rate and depth of cut on the surface finish. [Final Year Project Report] (Unpublished)

Baynard, Anakk Sawun. (2002) Study on mini-hydroelectric in Lundu district Sarawak. [Final Year Project Report] (Unpublished)

Chua, Wei Ping. (2002) 2D computer modelling of flow in air filter. [Final Year Project Report] (Unpublished)

Chung, Jenn Chiu. (2002) 2 dimensional computer modelling on flow in hydraulic turbine generator cooler. [Final Year Project Report] (Unpublished)

Conway, Ak Beddie. (2002) Design of A 2.4 GHz spread spectrum transceiver. [Final Year Project Report] (Unpublished)

Engkoh, Brayan (2002) Bank sloughing and deposition at and near mouth of Sungai Bako. [Final Year Project Report] (Unpublished)

Fam, Kueh Szue (2002) Cost and performance analysis of a go-kart. [Final Year Project Report] (Unpublished)

Harun, H. (2002) A study on the radio base station 2000. [Final Year Project Report] (Unpublished)

Idrus, I. (2002) An evaluation of the characteristics of metal cutting fluid due to the metal chips contamination. [Final Year Project Report] (Unpublished)

Ismandi, bin Junaidi (2002) Simulation of air conditioning flow pattern in passenger van. [Final Year Project Report] (Unpublished)

Jessica Lansay, anak Andrew Abak (2002) Application of acoustic emission (EA) technique in various types of woods. [Final Year Project Report] (Unpublished)

KOPET, EVELYN BLINDA (2002) Electromagnetic radiation concerning human health and environmental issues. [Final Year Project Report] (Unpublished)

Kolot, A. (2002) The study on Sarawak remote area solar energy application problems. [Final Year Project Report] (Unpublished)

Kong, Kok Yong (2002) Real-time flow rate monitoring system. [Final Year Project Report] (Unpublished)

Lau, Ngoh Huet (2002) Application of acoustic emission in the detection of leaks in water mains. [Final Year Project Report] (Unpublished)

Lee, Cheng Yiew (2002) Cathodic protection of steel under different environment. [Final Year Project Report] (Unpublished)

Lee, Ching Ching (2002) Production planning practices in Malaysian manufacturing industries. [Final Year Project Report] (Unpublished)

Lee, Wan Inn (2002) The design of fixture for product, bearing 97, for CNC machine. [Final Year Project Report] (Unpublished)

Leong, Wei Chian (2002) Design Of Control System For The Turn Table Module. [Final Year Project Report] (Unpublished)

Maulana, Bin Hanapi. (2002) Sensors for temperature measurement : error measurement of type K thermocouple. [Final Year Project Report] (Unpublished)

Mohamad Ariffin, Zulkiply (2002) Hazard and operability (Hazop) study of the boiler trip system at Sejingkat power corporation (SPC). [Final Year Project Report] (Unpublished)

Mohamad Satim, bin Selbi (2002) Design of water current turbine for electricity generation from tidal energy. [Final Year Project Report] (Unpublished)

Mohd. Rizal, Abdul Rashid (2002) The feasibility study of the implementation and utilization of photovoltaic and wind energy at Teluk Melano. [Final Year Project Report] (Unpublished)

Muhd Rahiza Afiela, Bin Abd. Rahman (2002) Design of solar cooker. [Final Year Project Report] (Unpublished)

Musa, J. (2002) Application of acoustic emission (AE) technique in various materials (metal, woods and bricks). [Final Year Project Report] (Unpublished)

Ng, Meng Hann. (2002) Simulation of a 10 Ghz rectangular microstrip patch antenna using microwave office 2000. [Final Year Project Report] (Unpublished)

Ng, Suh Hong. (2002) Experimental investigation of the velocity distribution for a bendway weir. [Final Year Project Report] (Unpublished)

Ng, Wee Meng (2002) Mechanical design of six legged walking robot. [Final Year Project Report] (Unpublished)

Nor Aeshah, Abdul Hamid. (2002) The effect of copper pipe length and diameter to solar water heating system. [Final Year Project Report] (Unpublished)

Nor Azimaah Anim, Mokhtar. (2002) Design and experimental study of water current turbine. [Final Year Project Report] (Unpublished)

Nupe, Harvard (2002) Design of stage and recording console. [Final Year Project Report] (Unpublished)

Ong, Siaw Peng (2002) A study on flexible pavement distress, evaluation and rehabilitation method. [Final Year Project Report] (Unpublished)

Pathmanathan R., S/O Ramachanderan M. (2002) 2D air flow pattern simulation in Unimas permanent campus, Kota Samarahan Sarawak. [Final Year Project Report] (Unpublished)

Phang, Tau Jak (2002) A study on non-ionizing radiation (extremely low frequency). [Final Year Project Report] (Unpublished)

Shanmuganathan, S/O Sinnadurai (2002) Design of a water distribution system for proposed BDA housing development area at Jalan Assyakirin, Bintulu, Sarawak. [Final Year Project Report] (Unpublished)

Shif Rizal, bin Abd. Malik (2002) The usage of system dynamics simulation software to model shop floor operations. [Final Year Project Report] (Unpublished)

Siti Juliana, Bt Said. (2002) A design of wastewater disposal system for small community. [Final Year Project Report] (Unpublished)

Siti Zahrah, Hj. Sahari (2002) Safety engineering study for a typical palm oil mill. [Final Year Project Report] (Unpublished)

Sukri, bin Sheikh Salimullah (2002) Short range TV transmitter (Amateur TV transmitter). [Final Year Project Report] (Unpublished)

Tan, Chan Boon (2002) Structural design of a reinforced concrete floating pontoon with an access walkway. [Final Year Project Report] (Unpublished)

Tan, Siew Yea (2002) Building a small concrete house (materials and manpower costing). [Final Year Project Report] (Unpublished)

Tan, Tang Chin (2002) Analysis a 5HP engine performances for go kart. [Final Year Project Report] (Unpublished)

Tan, Weng Joo. (2002) Turn table module in chain conveyor system. [Final Year Project Report] (Unpublished)

Tham, Yieng Wei. (2002) Computer aided statistical process control tool. [Final Year Project Report] (Unpublished)

Timothy Julius, Edward (2002) Analysis of square slabs with opening using yield line method. [Final Year Project Report] (Unpublished)

Tina Emilia Irene, Kalang (2002) Modeling of spread spectrum communciation system using matlab. [Final Year Project Report] (Unpublished)

Wong, Hoong Bok. (2002) Microcontroller interfacing and application. [Final Year Project Report] (Unpublished)

Wong, Lim Ping (2002) Relationship between torque and applied load in a bolt for different coefficient of frictions. [Final Year Project Report] (Unpublished)

Yuseri, Mohamad Zaman. (2002) Clean air system for enclosed working space. [Final Year Project Report] (Unpublished)

Yusland, bin Radin. (2002) The feasibility study of electricity generation from ocean tidal energy at Kuala Lawas. [Final Year Project Report] (Unpublished)

Picture

Universiti Malaysia Sarawak, Faculty of Engineering (2002) Faculty Engineering student sivil lab activity, 2002. [Picture]

Universiti Malaysia Sarawak, Faculty of Engineering (2002) Lawatan ke kampus tetap - Fakulti Kejuruteraan. [Picture]

Universiti Malaysia Sarawak, Faculty of Engineering (2002) Majlis Konvokesyen Komag 2002. [Picture]

Universiti Malaysia Sarawak, Faculty of Engineering (2002) ZECOM Engineering Berhad Excellence Award 2002. [Picture] (Unpublished)

Universiti Malaysia Sarawak, Fakulti Kejuruteraan (2002) Presentation of Osaka Gas Foundation of International Cultural exchange (OGFICE) scholarships and donation of research equipments to Faculty Engineering, Universiti Malaysia Sarawak, 2002. [Picture] (Unpublished)

Thesis

Wong, Kien Kuok. (2002) Parametic study on ductility of RC beams strengthened with external reinforcement. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Yong, Lisa (2002) Dynamic non-linear distortions of a radio over fibre system semiconductor laser. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).