Items where Division is "Academic Faculties, Institutes and Centres > Faculty of Engineering
Faculties, Institutes, Centres > Faculty of Engineering" and Year is 2002

Abdul Gani, Haji Abd. Rahman. (2002) Relationship between surface finish and chips. [Final Year Project Report] (Unpublished)

Abdullah, Ali (2002) Laser gun system :measurement and comparison. [Final Year Project Report] (Unpublished)

Awang Masri, A.A (2002) A study on thermal management in electronic packaging components. [Final Year Project Report] (Unpublished)

Azuan, Abu Talib (2002) Health and safety risk assessment in palm oil industry. [Final Year Project Report] (Unpublished)

B. J., Azzopardi and K., Sanaullah (2002) Re-entrainment in wave-plate mist eliminators. Chemical Engineering Science, 57. pp. 3557-3563. ISSN 0009-2509

Bala, Anak Gansa. (2002) The effect of spindle speed, feed rate and depth of cut on the surface finish. [Final Year Project Report] (Unpublished)

Baynard, Anakk Sawun. (2002) Study on mini-hydroelectric in Lundu district Sarawak. [Final Year Project Report] (Unpublished)

Chua, Wei Ping. (2002) 2D computer modelling of flow in air filter. [Final Year Project Report] (Unpublished)

Chung, Jenn Chiu. (2002) 2 dimensional computer modelling on flow in hydraulic turbine generator cooler. [Final Year Project Report] (Unpublished)

Conway, Ak Beddie. (2002) Design of A 2.4 GHz spread spectrum transceiver. [Final Year Project Report] (Unpublished)

Engkoh, Brayan (2002) Bank sloughing and deposition at and near mouth of Sungai Bako. [Final Year Project Report] (Unpublished)

Fam, Kueh Szue (2002) Cost and performance analysis of a go-kart. [Final Year Project Report] (Unpublished)

Harun, H. (2002) A study on the radio base station 2000. [Final Year Project Report] (Unpublished)

Idrus, I. (2002) An evaluation of the characteristics of metal cutting fluid due to the metal chips contamination. [Final Year Project Report] (Unpublished)

Ismandi, bin Junaidi (2002) Simulation of air conditioning flow pattern in passenger van. [Final Year Project Report] (Unpublished)

Jessica Lansay, anak Andrew Abak (2002) Application of acoustic emission (EA) technique in various types of woods. [Final Year Project Report] (Unpublished)

KOPET, EVELYN BLINDA (2002) Electromagnetic radiation concerning human health and environmental issues. [Final Year Project Report] (Unpublished)

Kolot, A. (2002) The study on Sarawak remote area solar energy application problems. [Final Year Project Report] (Unpublished)

Kong, Kok Yong (2002) Real-time flow rate monitoring system. [Final Year Project Report] (Unpublished)

Lau, Ngoh Huet (2002) Application of acoustic emission in the detection of leaks in water mains. [Final Year Project Report] (Unpublished)

Lee, Cheng Yiew (2002) Cathodic protection of steel under different environment. [Final Year Project Report] (Unpublished)

Lee, Ching Ching (2002) Production planning practices in Malaysian manufacturing industries. [Final Year Project Report] (Unpublished)

Lee, Wan Inn (2002) The design of fixture for product, bearing 97, for CNC machine. [Final Year Project Report] (Unpublished)

Leong, Wei Chian (2002) Design Of Control System For The Turn Table Module. [Final Year Project Report] (Unpublished)

Maulana, Bin Hanapi. (2002) Sensors for temperature measurement : error measurement of type K thermocouple. [Final Year Project Report] (Unpublished)

Mohamad Ariffin, Zulkiply (2002) Hazard and operability (Hazop) study of the boiler trip system at Sejingkat power corporation (SPC). [Final Year Project Report] (Unpublished)

Mohamad Satim, bin Selbi (2002) Design of water current turbine for electricity generation from tidal energy. [Final Year Project Report] (Unpublished)

Mohd. Rizal, Abdul Rashid (2002) The feasibility study of the implementation and utilization of photovoltaic and wind energy at Teluk Melano. [Final Year Project Report] (Unpublished)

Muhd Rahiza Afiela, Bin Abd. Rahman (2002) Design of solar cooker. [Final Year Project Report] (Unpublished)

Musa, J. (2002) Application of acoustic emission (AE) technique in various materials (metal, woods and bricks). [Final Year Project Report] (Unpublished)

Ng, Meng Hann. (2002) Simulation of a 10 Ghz rectangular microstrip patch antenna using microwave office 2000. [Final Year Project Report] (Unpublished)

Ng, Suh Hong. (2002) Experimental investigation of the velocity distribution for a bendway weir. [Final Year Project Report] (Unpublished)

Ng, Wee Meng (2002) Mechanical design of six legged walking robot. [Final Year Project Report] (Unpublished)

Nor Aeshah, Abdul Hamid. (2002) The effect of copper pipe length and diameter to solar water heating system. [Final Year Project Report] (Unpublished)

Nor Azimaah Anim, Mokhtar. (2002) Design and experimental study of water current turbine. [Final Year Project Report] (Unpublished)

Nupe, Harvard (2002) Design of stage and recording console. [Final Year Project Report] (Unpublished)

Ong, Siaw Peng (2002) A study on flexible pavement distress, evaluation and rehabilitation method. [Final Year Project Report] (Unpublished)

Pathmanathan R., S/O Ramachanderan M. (2002) 2D air flow pattern simulation in Unimas permanent campus, Kota Samarahan Sarawak. [Final Year Project Report] (Unpublished)

Phang, Tau Jak (2002) A study on non-ionizing radiation (extremely low frequency). [Final Year Project Report] (Unpublished)

Shanmuganathan, S/O Sinnadurai (2002) Design of a water distribution system for proposed BDA housing development area at Jalan Assyakirin, Bintulu, Sarawak. [Final Year Project Report] (Unpublished)

Shif Rizal, bin Abd. Malik (2002) The usage of system dynamics simulation software to model shop floor operations. [Final Year Project Report] (Unpublished)

Sim, Poh Ching and Chin, Kui Fern and Suaidi, M.K (2002) Evolution of the Boolean function manipulation. Student Conference on Research and Development, 2002. SCOReD 2002. ISSN ISBN: 0-7803-7565-3

Siti Juliana, Bt Said. (2002) A design of wastewater disposal system for small community. [Final Year Project Report] (Unpublished)

Siti Zahrah, Hj. Sahari (2002) Safety engineering study for a typical palm oil mill. [Final Year Project Report] (Unpublished)

Sukri, bin Sheikh Salimullah (2002) Short range TV transmitter (Amateur TV transmitter). [Final Year Project Report] (Unpublished)

Tan, Chan Boon (2002) Structural design of a reinforced concrete floating pontoon with an access walkway. [Final Year Project Report] (Unpublished)

Tan, Siew Yea (2002) Building a small concrete house (materials and manpower costing). [Final Year Project Report] (Unpublished)

Tan, Tang Chin (2002) Analysis a 5HP engine performances for go kart. [Final Year Project Report] (Unpublished)

Tan, Weng Joo. (2002) Turn table module in chain conveyor system. [Final Year Project Report] (Unpublished)

Tham, Yieng Wei. (2002) Computer aided statistical process control tool. [Final Year Project Report] (Unpublished)

Timothy Julius, Edward (2002) Analysis of square slabs with opening using yield line method. [Final Year Project Report] (Unpublished)

Tina Emilia Irene, Kalang (2002) Modeling of spread spectrum communciation system using matlab. [Final Year Project Report] (Unpublished)

Universiti Malaysia Sarawak, Faculty of Engineering (2002) Faculty Engineering student sivil lab activity, 2002. [Picture]

Universiti Malaysia Sarawak, Faculty of Engineering (2002) Lawatan ke kampus tetap - Fakulti Kejuruteraan. [Picture]

Universiti Malaysia Sarawak, Faculty of Engineering (2002) Majlis Konvokesyen Komag 2002. [Picture]

Universiti Malaysia Sarawak, Faculty of Engineering (2002) ZECOM Engineering Berhad Excellence Award 2002. [Picture] (Unpublished)

Universiti Malaysia Sarawak, Fakulti Kejuruteraan (2002) Presentation of Osaka Gas Foundation of International Cultural exchange (OGFICE) scholarships and donation of research equipments to Faculty Engineering, Universiti Malaysia Sarawak, 2002. [Picture] (Unpublished)

Wong, Hoong Bok. (2002) Microcontroller interfacing and application. [Final Year Project Report] (Unpublished)

Wong, Kien Kuok. (2002) Parametic study on ductility of RC beams strengthened with external reinforcement. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Wong, Lim Ping (2002) Relationship between torque and applied load in a bolt for different coefficient of frictions. [Final Year Project Report] (Unpublished)

Yong, Lisa (2002) Dynamic non-linear distortions of a radio over fibre system semiconductor laser. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Yuseri, Mohamad Zaman. (2002) Clean air system for enclosed working space. [Final Year Project Report] (Unpublished)

Yusland, bin Radin. (2002) The feasibility study of electricity generation from ocean tidal energy at Kuala Lawas. [Final Year Project Report] (Unpublished)