Items where Subject is "T Technology > TP Chemical technology"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | W | Y | Z
Number of items at this level: 195.

Wee, Freddy Liang Kho and Puong, Ling Law (2014) A predictive study : carbon monoxide emission modeling at a signalized intersection. Journal of Engineering Science and Technology, 9 (1). pp. 1-14. ISSN 1823-4690

A

A., Adzlan and H., Gotoda (2012) Experimental investigation of vortex breakdown in a coaxial swirling jet with a density difference. Chemical Engineering Science, 80. pp. 174-181. ISSN 0009-2509

Abd. Raqib, Bin Piee (2017) Microbial fuel cell (MFC) with algal biocathode: bioenergy production and wastewater treatment using sago mill effluent. [E-LPTA] (Unpublished)

Abdul Farid, Abdul Rahman (2006) Experiment of flame spread on plywood. [E-LPTA] (Unpublished)

Abdul Karim, Siti Kartina and Lim, Soh-Fong and Chua, S. N David and Salleh, Shanti Faridah and Law, Puongling (2016) Banana Fibers as Sorbent for Removal of Acid Green Dye from Water. Journal of Chemistry, 2016. ISSN 20909063

Abdul Qayoom, Jakhrani and Andrew Ragai, Henry Rigit and Othman, A.K. and Saleem, Raza Samo and Shakeel Ahmed, Kamboh (2012) Estimation of Carbon Footprints from Diesel Generator Emissions. International Conference on Green and Ubiquitous Technology (GUT) 2012. ISSN (ISBN) 978-1-4577-2171-7

Abu Saleh, Ahmed and Seiya, Watanabe and Sinin, Hamdan and Tsutomu, Kodaki and Keisuke, Makino (2014) Construction of Recombinant Yeast Expressing Thermo-Stable Enzyme for Efficient Bioethanol Production from Woody Biomass. Journal of Chemical and Natural Resources Engineering, 3. pp. 1-11. ISSN 1823-5255

Adamu, Muhammad and Md. Rezaur, Rahman and Sinin, Hamdan and Khairuddin, Sanaullah (2019) Recent developments in bamboo fiber‑based composites: a review. Polymer Bulletin, 76 (5). pp. 2655-2682. ISSN 1436-2449

Adnan, Ahmad and Sidra, Waheed and Shahzad, Maqsood Khan and Sabad, e-Gul and Muhammad, Shafiq and Muhammad, Farooq and K., Sanaullah and Tahir, Jamil (2015) Effect of silica on the properties of cellulose acetate/polyethylene glycol membranes for reverse osmosis. Desalination, 355. pp. 1-10. ISSN 0011-9164

Ahmad Salam, Farooqi (2017) Development of Novel Liquid Momentum Dissipation System in Swirl Bubbly Flow Column. Masters thesis, UNIMAS.

Ahmad Salam, Farooqi and Ariny, Demong and Khairuddin, Sanaullah and Shaharin Anwar, Sulaiman and Andrew Ragai, Henry Rigit and Shanti Faridah, Saleh and Shah Jehan, Gilliani and Afrasyab, Khan (2016) Effects of Swirl Bubble Injection on Mass Transfer and Hydrodynamics for Bubbly Flow Reactors: A Concept Paper. In: 9th International Unimas Stem Engineering Conference, ENCON 2016, 26 October 2016 through 28 October 2016, Riverside Majestic Hotel Kuching, Sarawak.

Alhaji, M.H. and Sanaullah, K. and Lim, S.-F. and Khan, A. and Hipolito, C.N. and Abdullah, M.O. and Bhawani, S.A. and Jamil, T. and UNSPECIFIED (2016) Photocatalytic treatment technology for palm oil mill effluent (POME) – A review. Process Safety and Environmental Protection, 102. pp. 673-686. ISSN 0957-5820

Alhaji, Mohammed Haji and Khairuddin, Sanaullah and Afrasyab, Khan and Hamza, Abdulhamid M. and Muhammad, Ali M. and Mustapha, S. I. and Rigit, Andrew Ragai Henry and Bhawani, Showkat Ahmad (2017) Erratum to: Recent developments in immobilizing titanium dioxide on supports for degradation of organic pollutants in wastewater-A review. International Journal of Environmental Science and Technology, 14 (9). p. 2053. ISSN 1735-1472

Amir Azam, Khan and Magdalene, Anak Andrew Munot and Shirley, Anak Johnathan Tanjong and Rudiyanto, Bin Philman Jong and Hishammudin Afifi, Bin Huspi (2018) Gearing Towards a Greener Future. UNIMAS Publisher, Kota Samarahan, Sarawak. ISBN 9789672008552

Aneela, Sabir and Atif, Islam and Muhammad, Shafiq and Amir, Shafeeq and Muhammad Taqi, Zahid Butt and Nasir M., Ahmad and Khairuddin, Sanaullah and Tahir, Jamil (2016) Novel polymer matrix composite membrane doped with fumed silica particles for reverse osmosis desalination. Desalination, 368. pp. 159-170. ISSN 0011-9164

Aneela, Sabir and Wail, Falath and Jacob, Karl I. and Muhammad, Shafiq and Muhammad Azeem, Munawar and Atif, Islam and Nafisa, Gull and Muhammad Taqi, Zahid Butt and Khairuddin, Sanaullah and Tahir, Jamil (2016) Hyperbranched polyethyleneimine induced polycationic membranes for improved fouling resistance and high RO performance. European Polymer Journal, 85. pp. 266-278. ISSN 0014-3057

Anr, R. and Saleh, A.A. and Islam, M.S. and Hamdan, S. and Maleque, M.A (2016) Biodiesel Production from Crude Jatropha Oil using a Highly Active Heterogeneous Nanocatalyst by Optimizing Transesterification Reaction Parameters. Energy and Fuels, 30 (1). pp. 334-343. ISSN 0887-0624

Arfaezah, Anuar and Ibrahim, Yakub and Norsuzailina, Mohamed Sutan and Cirilo, Nolasco-Hipolito and Yun Hin, Taufiq-Yap (2014) Temperature-Programmed Reduction of Copper-Manganese Catalysts Derived from Biomass Activated Carbon. Journal of Applied Science & Process Engineering, 1 (1). ISSN 2289-7771

B

Boon, Kui Ho and Zainab, Ngaini and Neilsen, Paul Matthew and Siaw, San Hwang and Linton, Reagan Entigu and Ee, Ling Kong and Boon, Kiat Lee (2017) Synthesis and Anticancer Activities of 4-[(Halophenyl)diazenyl]phenol and 4-[(Halophenyl)diazenyl]phenyl Aspirinate Derivatives against Nasopharyngeal Cancer Cell Lines. Journal of Chemistry, 2017. ISSN 2090-9071

Brandon, Ka Jen Hau (2017) Investigation of physico-mechanical, themal, dynamic mechanical, morphological and optical properties on low density polyethylene/silica and polypropylene/clay nanocomposites. [E-LPTA] (Unpublished)

C

Chen, J.Paul and Wang, Lawrence K. and Lei, Yang and Lim, Soh Fong (2007) Emerging Biosorption, Adsorption, Ion Exchange, and Membrane Technologies. In: Advanced Physicochemical Treatment Technologies. Handbook of Environmental Engineering, 5 . Humana Press, Totowa, NJ, pp. 367-390. ISBN 9781597451734

Cheng, Ann Chen and Shabdin, Mohd Long and Norliana, Rosli (2012) Spatial distribution of tropical estuarine nematode communities in Sarawak, Malaysia (Borneo). Raffles Bulletin of Zoology, 60 (1). pp. 173-181. ISSN 2345-7600

Chia, Chia Thong and Ching, Delsye Lee Teo and Chee, Khoon Ng (2017) Durability Characteristics of Polyvinyl Alcohol–Treated Oil Palm Shell Concrete. Journal of Materials in Civil Engineering, 29 (10). ISSN 1943-5533

Chiam, Catherine Ee Ming (2015) Determination of Heavy Metals in Water and Sediment of Batang Baleh. [E-LPTA] (Unpublished)

Chong, Li Yee (2017) Production of bacterial pigment by fermentation of serratia marcescens for dye sensitized solar cell. [E-LPTA] (Unpublished)

Corneelia, Anak Tedong (2017) Isotherm study of heavy metal adsorption by membrane incorporated with activated carbon. [E-LPTA] (Unpublished)

Cyreen, Anak Giman (2017) Investigate the performance analysis of a scale industrial fryer. [E-LPTA] (Unpublished)

D

Daisy Annette, Runyut and Sharon, Robert and Idawati, binti Ismail and Raudhah, binti Ahmadi and Nur Amalina Shairah, Abdul Samat (2018) Microstructure and Mechanical Characterization of Alkali-Activated Palm Oil Fuel Ash. Journal of Materials in Civil Engineering, 30 (7). pp. 1-15. ISSN 8991561

Dayang Siti Herdawati, Binti Abang Hardin (2017) Optimisation study on the improvement of crude palm oil (CPO) production process from palm oil mill. [E-LPTA] (Unpublished)

E

Elammaran, Jayamani and Sinin, Hamdan and Pushparaj, Ezhumalai and Muhammad Khusairy, Bin Bakri (2016) Investigation On Dielectric And Sound Absorption Properties Of Banana Fibers Reinforced Epoxy Composites. Jurnal Teknologi, 78 (6-10). pp. 97-103. ISSN 2180–3722

Erdawaty, Binti Mohd Jaafar (2019) Synthesis and Characterization of Graphene Oxide (GO) and Reduced Graphene Oxide (rGO) Thin Films as a Hole Transport Layer (HTL) on Azo-Kojic Compound for Organic Photovoltaic (OPV) Applications. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Ervina, Junaidi and Mariattia, M. and Sinin, Hamdan (2016) Effect of Filler Loading on the Tensile Properties of Multi-walled Carbon Nanotube and Graphene Nanopowder filled Epoxy Composites. Procedia Chemistry, 19. pp. 897-905. ISSN 1876-6196

Ervina, Junaidi and Ong, Boon Kian and Mariatti, Jaafar and Sinin, Hamdan (2014) Flexural properties for two-ply glass fiber reinforced composites with different loading of CNT/Epoxy film produced by different methods. Australian Journal of Basic and Applied Science, 8 (15). pp. 383-388. ISSN 1991-8178

Eugene, J. J. and M. Shahidul, Islam and Mamunur, R. (2019) Optimizing organic materials reduction from hazardous industrial bio-effluent by the aid of c/n enriched inoculum : an approach to use traditional anaerobic reactor to achieve environmental sustainability. Science International (Lahore), 31 (4). pp. 649-654. ISSN 1013-5316

Ewat, P. (2006) Development and performance tests of a sedimentation trap for silt and clay particles. [E-LPTA] (Unpublished)

F

Fatai Adesina, Anifowose and Jane, Labadin and Abdulazeez, Abdulraheem (2017) Hybrid intelligent systems in petroleum reservoir characterization and modeling: the journey so far and the challenges ahead. Journal of Petroleum Exploration and Production Technology, 7 (1). pp. 251-263. ISSN 2190-0558

Fatin Saiyidah, binti Ahmad Nordin (2015) The effect of temperature on ferulic acid production by Aspergillus fumigatus (F01) from sago bark for generating biovanillin. [E-LPTA] (Unpublished)

Fauzan, Sahdi and White, D. J. and Gaudin, Christophe (2017) Experiments using a novel penetrometer to assess changing strength of clay during remolding and reconsolidation. Journal of Geotechnical and Geoenvironmental Engineering, 143 (4). ISSN 1090-0241

Fui, Kiew Liew and Sinin, Hamdan and Md. Rezaur, Rahman and Mohamad, Rusop (2017) Thermomechanical Properties of Jute/Bamboo Cellulose Composite and Its Hybrid Composites: The Effects of Treatment and Fiber Loading. Advances in Materials Science and Engineering. ISSN 1687-8434

Fung, Jessica Yee Fong and Suk, Fun Chin and Sing, Muk Nga (2015) Facile synthesis of carbon nanoparticles from sodium alginate via ultrasonic-assisted nano-precipitation and thermal acid dehydration for ferric ion sensing. Sensors and Actuators, B: Chemical, 209. pp. 997-1004. ISSN 0925-4005

G

G., Hussain and K., Sanaullah (2009) Comparative Parametric Numerical Simulations Of Materials Used As Liners In The Explosively Formed Projectiles (EFPs). The Nucleus, 46 (3). pp. 301-309. ISSN 0 0 2 9 -5698

Gurumurthy, Hegde and Shoriya Aruni, Abdul Manaf and Anuj, Kumar and Gomaa, A M Ali and Kwok Feng, Chong and Zainab, Ngaini and K V, Sharma (2015) Biowaste Sago Bark Based Catalyst Free Carbon Nanospheres: Waste to Wealth Approach. ACS Sustainable Chemistry & Engineering, 3 (9). pp. 2247-2253.

H

Harreh, Dewi and Saleh, Aa A. and Reddy, A. N.R. and Hamdan, Sinin (2018) An Experimental Investigation of Karanja Biodiesel Production in Sarawak, Malaysia. Journal of Engineering (United States), 2018. ISSN 23144904

Hii, Yik Ming (2013) Some properties comparison between biodisesel production from crude palm oil (CPO) and olive oil and their blendings through conventional and microwave transesterification methods. [E-LPTA] (Unpublished)

I

Isa, F. and Haslinda, Zabiri and Ramasamy, Marappagounder and Lemma Dendena, Tufa and Shariff, A. M. and Shanti Faridah, Saleh (2017) Pressure modification index based on hydrodynamics and mass transfer effects for modeling of CO2 removal from natural gas via absorption at high pressures. International Journal of Greenhouse Gas Control, 56. pp. 173-186. ISSN 17505836

Islam, M.S. and Hamdan, S. and Rusop, M. and Rahman, M.R. and Ahmed, M.S and Idrus, M.A.M.M (2012) Dimensional stability and water repellent efficiency measurement of chemically modified tropical light hard wood. BioResources, 7 (1). pp. 1221-1231.

Ismail, Khalid (2000) Theoretical study on biogas combustion. [E-LPTA] (Unpublished)

Ismail, S. and Ahmed, A.S. and Reddy, Anr and Sinin, Hamdan (2016) Biodiesel Production from Castor Oil by Using Calcium Oxide Derived from Mud Clam Shell. Journal of Renewable Energy, 2016. ISSN 1537-744X

J

Jane, Labadin and C. Kon, M. L. and S. F. S., Juan (2009) Deterministic Malaria Transmission Model with Acquired Immunity. In: Proceedings of the World Congress on Engineering and Computer Science 2009, October 20-22, 2009, San Francisco, USA.

K

Khairul Anwar, Mohamad Said (2017) Effects of Immobilized AgNO3 in Composite Polysulfone-Polyethyleneimine Membrane towards Antibacterial Properties. In: ENCON Engineering Conference 2017, 13-15 September 2017, Imperial Hotel, Kuching. (Unpublished)

Khairul Anwar, Mohamad Said and Genevieve Gadung, George and Nurul Ain, Mohamed Alipah and Nor Zakirah, Ismail and Ramizah Liyana, Jama'In (2016) Effect of activated carbon in PSF-PEI-Ag symmetric membrane. MATEC Web of Conferences, 87. ISSN 2261236X

Khairul Anwar, Mohamad Said and Ibrahim, Yakub and Nurul Ain, Mohamed Alipah (2015) Effects of Solvent/Solid Ratio and Temperature on the Kinetics of Vitamin C Extraction from Musa Acuminata. Journal of Applied Science & Process Engineering, 2 (2). pp. 107-115. ISSN 2289-7771

Khairul Anwar, Mohamad Said and Mohamed Afizal, Mohamed Amin (2015) Overview on the Response Surface Methodology (RSM) in Extraction Processes. Journal of Applied Science & Process Engineering, 2 (1). ISSN 2289-7771

Khairul Anwar, Mohamad Said and Nor Zakirah, Ismail and Ramizah Liyana, Jama'In and Nurul Ain, Mohamed Alipah and Norsuzailina, Mohamed Sutan and Genevieve Gadung, George and Rubiyah, Baini and Nur Syuhada, Ahmad Zauzi (2018) Application of Freundlich and Temkin Isotherm to Study the Removal of Pb(II) Via Adsorption on Activated Carbon Equipped Polysulfone Membrane. International Journal of Engineering & Technology, 7 (3.18). pp. 91-93. ISSN 2227524X

Khairul Anwar, Mohamad Said and Zainad, Radzi and Ibrahim, Yakub and Mohamed Afizal, Mohamed Amin (2016) Extraction And Quantitative Determination Of Ascorbic Acid From Banana Peel Musa Acuminata ‘Kepok’. IIUM Engineering Journal, 17 (1). ISSN 1511-788X

Kinidi, Lennevey and Wei, Ivy Tan Ai and Noraziah, binti Abdul Wahab and Khairul Fikri, bin Tamrin and Hipolito, Cirilo Nolasco and Shanti Faridah, binti Salleh (2018) Recent Development in Ammonia Stripping Process for Industrial Wastewater Treatment. International Journal of Chemical Engineering. pp. 1-14. ISSN 1687-8078

Koon, Beng Ooi and Zou, Patrick X.W. and Mohammad Omar, Abdullah (2015) A Simulation Study of Passively Heated Residential Buildings. Procedia Engineering, 121. pp. 749-756. ISSN 1877-7058

L

Lai, Josephine Chang Hui and Md Rezaur, Rahman and Sinin, Hamdan (2018) Comparative studies of thermo-mechanical and morphological properties of polylactic acid/fumed silica/clay (1.28E) and polylactic acid/fumed silica/clay (1.34TCN) nanocomposites. Polymer Bulletin, 75 (1). pp. 135-147. ISSN 01700839

Lai, Josephine Chang Hui and Nor Liyana, Binti Yusop (2018) Physico-Mechanical, Morphological Properties of Polyvinyl Alcohol/Palm Kernel Shell/Coconut Kernel Shell Elastomeric Polymer Nanocomposites. Journal of Applied Science & Process Engineering, 5 (2). pp. 296-303. ISSN 2289-7771

Lai, Josephine Chang Hui. (2016) Studies on Physico-Mechanical, Thermal and Morphological Properties of Silica/Fumed Silica and Various Nanoclay Dispersed Polymer Nanocomposites. Masters thesis, UNIMAS.

Lakshmi Gandhan, Jaya Senan and Chen, Lim Tay and Suh, Cem Pang and Suk, Fun Chin (2017) Electrochemical Reduction and Deposition of Reduced Graphene Oxide/Manganese Oxide Composite for Supercapacitor Applications via Pulse-Chronoamperometry. Journal of Science and Technology, 9 (4). pp. 1-8. ISSN 2229-8460

Lee, Agnes Yung Weng. (2017) Heavy Metal Divalent Ions (Cu2+, Zn2+, Cd2+) Removal by Zirconium-based Magnetic Sorbent. Masters thesis, UNIMAS.

Lee, Ken Voon and Suh, Cem Pang and Suk, Fun Chin (2016) Regeneration of cello-oligomers via selective depolymerization of cellulose fibers derived from printed paper wastes. Carbohydrate Polymers, 142. pp. 31-37. ISSN 1448617

Lee, T.M (2009) Study of biodiesel production from vegetable oils and its application in diesel engine. [E-LPTA] (Unpublished)

Lennevey, Kinidi and Shanti Faridah, Salleh (2017) Phytoremediation of Nitrogen as Green Chemistry for Wastewater Treatment System. International Journal of Chemical Engineering, 2017. ISSN 1687-8078

Liew, Cai Foon. (2010) Ex vitro grafting of papaya (carica papaya l.). [E-LPTA] (Unpublished)

Lim, Soh Fong and Lee, Agnes Yung Weng (2015) Kinetic study on removal of heavy metal ions from aqueous solution by using soil. Environmental Science and Pollution Research, 22. pp. 10144-10158. ISSN 1614-7499

Ling, Teck Yee and Phang, Kong S. and Soo, Chen Lin and Lee, Nyanti and Sim, Siong Fong and Jongkar, Anak Grinang (2019) Spatiotemporal profiles of water quality at a new large tropical hydroelectric dam reservoir. AACL Bioflux, 12 (3). pp. 893-907. ISSN 1844-9166

Ling, Teck Yee and Phang, Kong Siew and Soo, Chen Lin and Nyanti, Lee and Sim, Siong Fong and Grinang, Jongkar (2019) Spatiotemporal profiles of water quality at a new large tropical hydroelectric dam reservoir. AACL Bioflux, 12 (3). pp. 893-907. ISSN 1844-9166

Ling, Teck Yee and Soo, Chen Lin and Kho, Chui Ping and Nyanti, Lee and Sim, Siong Fong and Lee, Karen Suan Ping and Ganyai, Tonny (2019) Changes in Water and Sediment Quality of a River Being Impounded and Differences among Functional Zones of the New Large Tropical Hydroelectric Reservoir. Polish Journal of Environmental Studies, 28 (6). 4271 -4285. ISSN 1230-1485

Lydia, Lee Shin Nuo (2017) Phycoremediation by spirulina platensis for ammoniacal nitrogen reduction. [E-LPTA] (Unpublished)

M

M., Munir and A.H., Qureshi and K., Sanaullah (2009) Pervaporation Of Ethanol/Water Mixture Using Polymeric Membrane. The Nucleus, 46 (3). ISSN 0 0 2 9 -5698

M., O. Abdullah and Y., K. Gan and K., M.Tay and N., Julai (2011) A Multi-Purpose Mini Hybrid Fuel Cell-Battery-Solar Portable Device For Rural Applications: Laboratory Testing. International Journal of Recent Research and Applied Studies, 7 (4). pp. 390-402. ISSN 2076-7366

M.F., Atan and K.A., Mapi and S.N.F., Ghazali and N., Abdul Rahman and S.F., Salleh (2014) Adsorption of Humic Substances by using Coconut Copra. -.

M.O, Abdullah (2012) Applied Energy: An Introduction. CRC Press .

M.S., Jamaludin and A., Zulkharnain and A.A., Khan and N., Wagiman (2015) Effect of Glycidyl Methacrylate on Water Absorption Properties of Sago Hampas Biocomposite. Journal of Civil Engineering, Science and Technology, 6 (2). ISSN 2141-2634

Maria, Ngu-Schwemlein and Suk, Fun Chin and Ryan, Hileman and Chris, Drozdowski and Clint, Upchurch and April, Hargrove (2016) Carbon nanodots as molecular scaffolds for development of antimicrobial agents. Bioorganic & Medicinal Chemistry Letters, 26 (7). pp. 1745-1749. ISSN 0960-894X

Marini, Sawawi and Nor Umirah, Sudirman and Siti Kudnie, Sahari and Mahshuri, Yusof and Magdalene, Andrew-Munot and Nur Tahirah, Razali and Rohana, Sapawi and Kuryati, Kipli (2018) The Effect of Silane Treatment on Rice Husk / Phenol Formaldehyde Particleboard Mechanical Properties. International Journal of Engineering and Technology (UAE), 7 (3.18). pp. 53-57. ISSN 2227-524X

Marlina, Marzuki (2013) Gas-liquid two-phase flow pattern determination for vertical microchannel. [E-LPTA] (Unpublished)

Md Rezaur, Rahman and Lai, Josephine Chang Hui and Sinin, Hamdan (2016) Physical, Mechanical, Thermal and Morphology Properties of Biodegradable Polymer Nanocomposites and Its Comparison. MATEC Web of Conferences, 87. ISSN 2261236X

Md Rezaur, Rahman and Sinin, Bin Hamdan and Jayamani, Elammaran and Kakar, Akshay and Muhammad Khusairy, Bin Bakri and Fahmi Asyadi, Bin Md Yusof (2019) Tert‑butyl catechol/alkaline‑treated kenaf/jute polyethylene hybrid composites: impact on physico‑mechanical, thermal and morphological properties. Polymer Bulletin, 76 (2). pp. 763-784. ISSN 1436-2449

Md Rezaur, Rahman and Sinin, Hamdan and Zainab, Ngaini and Elammaran, Jayamani and Akshay, Kakar and Muhammad Khusairy, Bin Bakri and Fahmi Asyadi, Bin Md Yusof (2019) Cellulose fiber‑reinforced thermosetting composites: impact of cyanoethyl modification on mechanical, thermal and morphological properties. Polymer Bulletin, 76 (8). pp. 4295-4311. ISSN 0170-0839

Md. Aminur, Rahman (2010) Stabilization of Sarawak peat by different types of stabilizer. Masters thesis, Universiti Malaysia Sarawak, (UNIMAS).

Md. Azharul, Islam and I.A.W., Tan and A., Benhouria and M., Asif and B.H., Hameed (2015) Mesoporous and adsorptive properties of palm date seed activated carbon prepared via sequential hydrothermal carbonization and sodium hydroxide activation. Chemical Engineering Journal, 270. pp. 187-195. ISSN 1385-8947

Md. Faruk, bin Hossen (2016) Characterization of chemically treated jute fiber reinforced polyethylene clay nanocomposites as a function of treatment methods. PhD thesis, UNIMAS.

Md. Mizanur, Rahman (2015) Studies of jute fiber and jute cellulose reinforced polyethylene with maleic Anhydride, Nanoclay and Silica biocomposites. Masters thesis, UNIMAS.

Md. Rezaur, Rahman and Sinin, Hamdan and Lai, Josephine Chang Hui (2017) Differential Scanning Calorimetry (DSC) and Thermogravimetric Analysis (TGA) of Wood polymer nanocomposites. MATEC Web of Conferences, 87. ISSN 2261236X

Md. Saiful, Islam (2012) Chemical Modification of tropical wood polymer composites for value-added applications. PhD thesis, Universiti Malaysia Sarawak, (UNIMAS).

Mohamad Ismail, Mohamad Salim (2016) Conversion of Castor oil to Biodiesel by Using Heterogeneous Catalyst. Masters thesis, UNIMAS.

Mohamad Said, K. A. and Genevieve Gadung, George and Mohamed Alipah, N. A. and Nor Zakirah, Ismail and Ramizah Liyana, Jama'In and Norlisa, Mili (2017) Effect of activated carbon in Polysufone-Polyethyleneimine-Silver composite membrane towards adsorption of chromium (Cr), lead (Pb), silver (Ag) and cadmium (Cd) in synthetic wastewater. Journal of Materials and Environmental Science, 8 (10). pp. 3740-3746. ISSN 20282508

Mohamad Zulfika Hazielim, Bin Zakaria (2019) Alkali modification of aluminium dross as an adsorbent for removal of Congo red in aqueous solution. Masters thesis, Universiti Malaysia Sarawak.

Mohamad Zulfika Hazielim, b Zakaria and Nur Syuhada, Ahmad Zauzi and Rubiyah, Baini and Norsuzailina, Mohamed Sutan and Md Rezaur, Rahman (2017) Evaluation of Aluminium Dross as Adsorbent for Removal of Carcinogenic Congo Red Dye in Wastewater. IOP Conf. Series: Materials Science and Engineering, 216 (1). ISSN 1757-899X

Mohamad Zulfika Hazielim, b Zakaria and Rubiyah, Baini and Nur Syuhada, Ahmad Zauzi (2017) Effect of pH, Dosage and Concentration on the Adsorption of Congo Red onto Untreated and Treated Aluminium Dross. IOP Conference Series: Materials Science and Engineering, 205 (1). ISSN 17578981

Mohammad, Masita and Ibrahim, Yakub and Zahira, Yaakob and Nilofar, Asim and Kamaruzzaman, Sopian (2018) Adsorption Isotherm of Chromium (VI) into Zncl2 Impregnated Activated Carbon Derived by Jatropha Curcas Seed Hull. IOP Conference Series: Materials Science and Engineering, 293 (1). pp. 1-6. ISSN 17578981

Mohammad Fadzli, bin Hj Jawawi (2016) Chemical Stabilization of Mukah Peat with Locally Available Agricultural and Industrial By-Products. Masters thesis, UNIMAS.

Mohammad Omar, Abdullah and Tang, Chung Hieng (2010) Comparative analysis of performance and techno-economics for a H2O–NH3–H2 absorption refrigerator driven by different energy sources. Applied Energy, 87. pp. 1535-1545. ISSN 0306-2619

Mohammad Omar, Abdullah (2012) Essential notes on applied energy : for mechanical and chemical engineering students (objective, practical short questions & sample answers). Universiti Malaysia Sarawak. ISBN 978-967-5527-15-9

Mohammad Syuhaimi, Ab-Rahman and Fazlinda, Ab-Aziz and Noor Azie Azura, Mohd Arif and Saiful Dzulkefly, Zan and Seri Mastura, Mustaza and Abang Anuar, Ehsan and Sahbudin, Shaari (2009) The study of the good polishing method for polymer SU-8 waveguide. Optica Applicata, 39 (3). pp. 459-465.

Mohammed Haji, Alhaji (2018) Removal of Recalcitrant Organic Pollutants from Pre-treated Palm Oil Mill Effluent using a Novel Cylindrical Column Immobilized Photocatalytic Reactor. PhD thesis, Universiti Malaysia Sarawak.

Mohammed Haji, Alhaji and Khairuddin, Sanaullah and Shanti Faridah, Saleh and Rubiyah, Baini and Soh, Fong Lim and Andrew Ragai, Henry Rigit and Khairul Anwar, Mohamad Said and Afrasyab, Khan (2018) Photo-oxidation of pre-treated palm oil mill Effluent using cylindricalcolumn immobilized photoreactor. Process Safety and Environmental Protection, 117. pp. 180-189. ISSN 0957-5820

Mohd Danial, Bin Ibrahim (2018) Microwave pyrolysis with KOH/NaOH mixture activation: A new approach to produce micro-mesoporous activated carbon for textile dye adsorption. Bioresource Technology, 266. pp. 1-10. ISSN 9608524

Mohd Fareez Edzuan, Bin Abdullah and Nadzirah, Binti Madzrol and Rolf Willa, Anak Patrick Sandin (2016) Effects of Biodiesel Saturation Degrees on NOx Emission and FTIR Spectroscopy. Journal of Applied Science & Process Engineering, 3 (1). ISSN 2289-7771

Mohd Farid, Bin Atan and Mohd Azlan, Bin Hussain (2019) Dynamic Modeling : The influence of the Improved Solid Elutriation Correlation on the Two-Phase Mathematical Model of Polyolefin Polymerization in Gas-Phase Fluidized Bed Reactor. In: 26th Regional Symposium on Chemical Engineering (RSCE 2019), 30-31 October 2019, Armada Hotel, Petaling Jaya, Malaysia.

Mohd Farid, Bin Atan and Mohd Azlan, Bin Hussain and Mohammad Reza, Abbasi and Mohammad Jakir, Hossain Khan and Muhamad Fazly, Bin Abdul Patah (2019) Advances in Mathematical Modeling of Gas-Phase Olefin Polymerization. Processes, 7 (2). p. 67. ISSN 2227-9717

Mohd Farid, Bin Atan and Mohd Azlan, bin Hussain and Nazeri, Bin Abdul Rahman (2018) Past And Current Development Of Two-Phase Modeling Of Polypropylene In Gas Phase Fluidized Bed Reactor : A Review. In: 1 st International Conference on Innovative Sciences and Technologies for Research and Education (InnoSTRE), 18-20 Disember 2018, Riverside Majestic Hotel, Kuching, Sarawak.

Mohd Idris, Bin Ibrahim (2017) The feasibility of the mixing liquid fuels for the boiler in terms of combustion efficency, environmental impact to the surrounding and cost saving. [E-LPTA] (Unpublished)

Mugilan, A/L Rajendran (2017) Distribution of Heavy Metals in Water, Sediment and Fishes of the Baram River of Northern Sarawak, Malaysia. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Muhamad Shaiezad Aiman, Bin Ayub (2017) Development of decanter cake into commercial by product in Sarawak. [E-LPTA] (Unpublished)

Muhammad, Adamu and Md Rezaur, Rahman and Sinin, Hamdan (2019) Formulation optimization and characterization of bamboo/polyvinyl alcohol/clay nanocomposite by response surface methodology. Composites Part B: Engineering, 176. ISSN 1359-8368

Muhammad, Jayyad (2017) Preparation and characterization of sago starch-cellulose reinforced polylactic acid hybrid biocomposite. [E-LPTA] (Unpublished)

Muhammad Khusairy, Bin Bakri and Elammaran, Jayamani and Sinin, Hamdan and Md Rezaur, Rahman and Akshay, Kakar (2018) Potential of Borneo Acacia wood in fully biodegradable bio-composites’ commercial production and application. Polymer Bulletin. pp. 1-22. ISSN 01700839

Muhammad Khusairy Bin Bakri and Elammaran Jayamani and Sinin Hamdan and Md Rezaur Ezaur Rahman and Kokheng Soon and Akshay Kakar (2016) Fundamental study on the effect of alkaline treatment on natural fibers structures and behaviors. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8759-8763. ISSN 18196608

N

Nadarajan, Priya (2015) Synthesis of Nickel(II) Complexes Using α,β-Conjugated Schiff Base Compounds. [E-LPTA] (Unpublished)

Nadzirah, Sh. and Uda, Hashim and Kashif, M. and Shahidah Arina, Shamsuddin (2016) Stable electrical, morphological and optical properties of titanium dioxide nanoparticles affected by annealing temperature. Microsystem Technologies. pp. 1-8. ISSN 9467076

Nadziri, Nurulhuda and Idawati, binti Ismail and Sinin, bin Hamdan (2018) Binding gel characterization of alkali-activated binders based on palm oil fuel ash (POFA) and fly ash. Journal of Sustainable Cement-Based Materials, 7 (1). pp. 1-14. ISSN 2165-0373

Nazeri, Abdul Rahman (2016) Sustainable utilisation of pelletised biomass wastes as fuel to power generation in Sarawak. PhD thesis, Universiti Malaysia Sarawak.

Nik Amirah Farhana, Nik Ahmad Lutfi and Mohd Farid, Atan and Nazeri, Abdul Rahman and Shanti Faridah, Salleh and Noraziah, Abdul Wahab (2016) Study On Mathematical Model In Simulating Cymbopogon Winterianus Essential Oil Extraction By Steam Distillation. Journal of Applied Science & Process Engineering, 3 (1). pp. 1-16. ISSN 2289-7771

Noor Syazwani, Binti Salim (2017) Palm oil mill effluent treatment using hybrid microbial fuel cell-activated carbon system. [E-LPTA] (Unpublished)

Nor Hasmaliana, Abdul Manas and Rosli, Md. Illias and Nor Muhammad, Mahadi (2018) Strategy in manipulating transglycosylation activity of glycosyl hydrolase for oligosaccharide production. Critical Reviews in Biotechnology, 38 (2). pp. 272-293. ISSN 0738-8551

Norfamila, Che Mat and Lipscomb, Glenn Glenn (2017) Membrane process optimization for carbon capture. International Journal of Greenhouse Gas Control, 62. pp. 1-12. ISSN 17505836

Norsuzailina, Mohamed Sutan and Siti Masjida, Mazlan and Siti Noor Linda, Binti Taib and Teo, Delsye Ching Lee and Alsidqi, Hasan and Siti Kudnie, Sahari and Khairul Anwar, Mohamad Said and Habibur Rahman, Sobuz (2018) Biomass Morphology Subjected to Different Chemical Treatment. E3S Web of Conferences, 34. pp. 1-8. ISSN 22671242

Nur Amalina Shairah, Abdul Samat and Haslinda, Zabiri and Bashariah, Kamaruddin (2018) The Development And Investigation Analysis Of An Arx-Based Generalized Likelihood Ratio (GLR) Stiction Detection Method. Jurnal Teknologi, 80 (4). pp. 1-16. ISSN 2180–3722 (online)

Nur Amalina Shairah, Abdul Samat and Siti Aishah, Zulkafly and Ummie Zulaikha, Kamarul Jaman and Nur Syuhada, Ahmad Zauzi and Md Rezaur, Rahman and Rubiyah, Baini (2018) Characteristics Analysis of Bio Based Silica Extracted from Sarawak Palm Oil Waste. International Journal of Engineering & Technology, 7 (3.18). pp. 94-96. ISSN 2227524X

Nur Fariheen Natasha, Binti Seleman (2017) Removal of heavy metal from plating industrial wastewater by sago waste using coagulation method. [E-LPTA] (Unpublished)

Nur Hidayatul Nazirah, Binti Kamarudin and Herma Dina, Setiabudi and Aishah, Binti Abdul Jalil and Siti Hazirah, Binti Adam and Nur Fatien, Binti Muhamad Salleh (2019) Utilization of Lapindo Volcanic Mud for Enhanced Sonosorption Removal of Acid Orange 52. Bulletin of Chemical Reaction Engineering & Catalysis, 14 (1). pp. 189-195. ISSN 1978-2993

Nurashikin, Suhaili and Tan, Joo Shun and Mohd-Shamzi, Mohamed and Murni, Halim and A.B., Ariff (2015) Effects of dual impeller system of Rushton turbine, concave disk turbine and their combinations on the performance of kojic acid fermentation by Aspergillus flavus Link 44-1. Asia-Pacific Journal Of Chemical Engineering, 10 (1). pp. 65-74. ISSN 1932-2143

Nurleyna, Binti Yunus (2007) Studies on the morphological and chemical properties of Sago Bark and the feasibility of laccase binding of sago bark fibres for the production of fibreboard. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

O

Octavio, Carvajal-Zarrabal and Patricia M., Hayward-Jones and Cirilo Nolasco, Nolasco-Hipólito and Dulce, Barradas-Dermitz and Ana Laura, Calderón-Garcidueñas and Noe, Lopez-Amador (2017) Use of Cardiac Injury Markers in the Postmortem Diagnosis of Sudden Cardiac Death. Journal of Forensic Sciences, 62 (5). pp. 1332-1335. ISSN 0022-1198

Oudrey, Thomas Ngau (2017) Application of water pinch technology in minimization of water consumption at a palm oil mill. [E-LPTA] (Unpublished)

P

P.K, Kolay and M.R, Aminur and S.N.L., Taib (2011) Effect of alkali on tropical peat stabilized with different stabilizers. International Journal of Geotechnical Engineering, 5 (2). pp. 189-197.

Pang, S.C and Chin, S.F. and Nadirah, A. and Tay, S.H. and Yazid, S.N.A.M (2015) Fabrication of polysaccharide-based nanoparticles as drug delivery nanocarriers. ECS Transactions, 66 (37). pp. 15-32. ISSN 1938-5862

Pei-Fang, Tee and Mohammad Omar, Abdullah and Ai, Ivy Wei Tan and Mohamed Afizal, Mohamed Amin and Cirilo, Nolasco-Hipolito and Kopli, Bujang (2016) Performance evaluation of a hybrid system for efficient palm oil mill effluent treatment via an air-cathode, tubular upflow microbial fuel cell coupled with a granular activated carbon adsorption. Bioresource Technology, 216. pp. 478-485. ISSN 0960-8524

Pei-Fang, Tee and Mohammad Omar, bin Abdullah and Tan, Ivy A. W. and Mohamed Afizal, bin Mohamed Amin and Nolasco-Hipólito, Cirilo and Kopli, bin Bujang (2018) Bio-energy generation in an affordable, single-chamber microbial fuel cell integrated with adsorption hybrid system: effects of temperature and comparison study. Environmental Technology (United Kingdom), 39 (8). pp. 1081-1088. ISSN 0959-3330

R

Rasib, Mohd Radzi (2015) Pharmacophore modelling and synthesis of benzaldehyde derivatives as anthelmintic agent (Ascaris lumbricoides). [E-LPTA] (Unpublished)

Raudhah, Ahmadi and Saiful, M.S. and Zawawi, D.F. and Sonia, Z A Rahman (2016) Production and Characterisation of Microfine Sized Palm Oil Fuel Ash (POFA) Originated from Bau, Lundu Palm Oil Mill. MATEC Web of Conferences, 87. ISSN 2261236X

Ravichandar, Shantini (2015) Calcium alginate immobilized TiO2/ZnO beads for the removal of copper. [E-LPTA] (Unpublished)

Ricky, Anak Tubam (2017) Removal color of dyes from textile industrial wastewater by sago waste as a coagulant. [E-LPTA] (Unpublished)

S

Sahari, S.K. and Abdul Halim, N.A. and Muhammad, K. and Sawawi, M. and Hamzah, A.A. and Yeop Majlis, B. (2017) Effect of Substrate Orientation on the Growth of Germanium Oxide in Dry Oxygen Ambience. Materials Science and Engineering, 201. ISSN 0921-5093

Said, K.A.M. and Jamain, R.L. and Sutan, N.S.M and Alipah, N.A.M (2018) Enhanced permeation performance with incorporation of silver nitrate onto polymeric membrane. Journal of Mechanical Engineering and Sciences, 12 (3). pp. 3811-3824. ISSN 2231-8380

Sanaullah, K. and Arshad, Mehmood and Khan, A. and Chughtai, I.R (2015) Buoyancy effects in steeply inclined air-water bubbly shear flow in a rectangular channel. Thermophysics and Aeromechanics, 22 (4). pp. 463-473. ISSN 0869-8643

Sarawak, Tribune (2003) UNIMAS conducting research on unique compost in Bintulu. [Newspaper Clipping] (In Press)

Seiya, Watanabe and Abu Saleh, Ahmed and Narayana, Visu Annaluru (2007) Ethanol production from xylose by recombinant Saccharomyces cerevisiae expressing proteinengineered NADH-preferring xylose reductase from Pichia stipitis. Microbiology Australia, 153. pp. 3044-3054. ISSN 1324-4272

Sharif, Hossain and Abu Saleh, Ahmed and Aishah, Salleh and Amru Nasrulhaq, Boyce (2008) Bioethanol Production from Agricultural Waste Biomass as a Renewable Bioenergy Resource in Biomaterials. In: 4th Kuala Lumpur International Conference on Biomedical Engineering 2008. IFMBE Proceedings, 21 . Springer-Verlag Berlin Heidelberg, pp. 300-305. ISBN 978-3-540-69139-6

Sharifah Nurul Fazilla, binti Ghazali (2013) Study on the potential of utilizing rice husk as biosorbent for humic substance. [E-LPTA] (Unpublished)

Sherena, Saree and Shanti Faridah, Salleh and Mohd Azlan, Ismail (2015) An Investigation of Stickiness Force of Palm Oil Fruit for Food Processing. Journal of Applied Science & Process Engineering, 2 (2). pp. 74-82. ISSN 2289-7771

Sherena, bt Sar-ee (2013) The investigation of vital physical and combustion properties for a range of blends of ethanoland gasoline. [E-LPTA] (Unpublished)

Sherlynna Parveen, Deshon Kaman and Tan, I. A. W. and Lik, Leonard Pueh Lim (2017) Palm oil mill effluent treatment using coconut shell - Based activated carbon: Adsorption equilibrium and isotherm. MATEC Web of Conferences, 87. ISSN 2261236X

Sherra Bellina, Barrabas and Rubiyah, Baini and Norsuzailina, Mohamed Mohamed Sutan and Yakub, Ibrahim and Khairul Anwar, Mohamad Said and Nur Syuhada, Ahmad Zauzi and Noraziah, Abdul Wahab and Hapiszul, Sulaiman (2016) HC-SCR: NOx Reduction using Mn and Cu Catalysts Impregnated in Coconut and Palm Kernel Shell Activated Carbon. MATEC Web of Conferences, 87. ISSN 2261236X

Sim Siong, Fong and Lau, Seng and Haslinda, Mat (2007) Reuse of nitric acid in the oxidative pretreatment step for preparation of humic acids from low rank coal of Mukah, Sarawak. Journal of the Brazilian Chemical Society, 18 (1). pp. 41-46. ISSN 0103-5053

Sim Siong, Fong and Lau, Seng and Norrafidah, Majri and Haslinda, Mat (2007) A comparative evaluation on the oxidative approaches for extraction of humic acids from low rank coal of Mukah, Sarawak. Journal of the Brazilian Chemical Society, 18 (1). pp. 34-40. ISSN 0103-5053

Sim Siong, Fong and Lau, Seng and Wong Nan, Chong and Janice, Asing and Muhammad Faizal, Md Nor and Amira Satirawaty, Mohd PauzanI (2006) Characterization of the coal derived humic acids from Mukah, Sarawak as soil conditioner. Journal of the Brazilian Chemical Society, 17 (3). pp. 582-587. ISSN 0103-5053

Sinin, Hamdan and Md. Saiful, Islam and Abu Saleh, Ahmed and Md. Rezaur, Rahman and Mohamad Rusop, Mahmood (2013) Study on thermal and biodegradation resistance of tropical wood material composites. Journal of Applied Polymer Science, 128 (3). pp. 1842-1847. ISSN 0021-8995

Siti Kudnie, Binti Sahari and Nik Amni Fathi, Binti Nik Zaini Fathi and Azrul Azlan, Bin Hamzah and Norsuzailina, Binti Mohamed Sutan and Zaidi, Bin Embong and Suhana, Binti Muhamed Sultan and Muhammad, Kashif and Marini, Binti Sawawi and Lilik, Hasanah and Rohana, Binti Sapawi and Kuryati, Binti Kipli and Abdul Rahman, bin Kram and Nazreen, Binti Junaidi (2019) Effects of Post-Deposition Annealing Temperatures on the Composition of Interfacial Layer at Germanium (Ge) /Aluminium Oxide (Al2 O3 ) (Kesan Suhu Penyepuhlindapan Pasca Pemendapan ke atas Komposisi Antara Muka Lapisan Oksida Germanium (Ge)/Aluminium (Al2 O3 )). Sains Malaysiana, 48 (6). pp. 1195-1199. ISSN 0126-6039

Siti Kudnie, Sahari and Nik Amni Fathi, Nik Zaini Fathi and Norsuzailina, Mohammad Sutan and Rohana, Sapawi (2015) Wet chemical cleaning effect on the formation of ultrathin interfacial layer between Germanium (Ge) and high-k dielectric. RSM 2015 - 2015 IEEE Regional Symposium on Micro and Nano Electronics, Proceedings. ISSN ISBN: 978-147998550-0

Siti Nur Shafina, Binti Sabaruddin (2017) Modelling and optimization of antibacterial composite membrane by using box-behnken. [E-LPTA] (Unpublished)

Soh, Fong Lim and Yung, Agnes Weng Lee and Yat, Seng Kam and Chua, David Sing Ngie (2018) Synthesis and Characterization of Alginate Encapsulated Zirconium-Based Ferromagnetic Sorbent for Adsorptive Removal of Dyes. International Journal of Engineering and Technology (UAE), 7 (3.18). pp. 87-90. ISSN 2227-524X

Steffen, Andreas and Tay, Meng Guan and Batsanov, Andrei S. and Howard, Judith A. K. and Beeby, Andrew and Khuong, Q. Vuong and Xue-Zhong, Sun and George, Michael W. and Marder, Todd B. (2010) 2,5-Bis(p-R-arylethynyl)rhodacyclopentadienes Show Intense Fluorescence: Denying the Presence of a Heavy Atom. Angewandte Chemie, 122 (13). 2349 -2353. ISSN 1521-3773

Sukinah, Binti Abdul Karim (2017) Apllication of magnetic material in solving environmental problem. [E-LPTA] (Unpublished)

Syed Muhammad Syafie, Bin Wan Saiful Bahari (2017) Development of palm oil sludge into commercial by-product in Sarawak. [E-LPTA] (Unpublished)

Syed Salman, Shafqat and Amir Azam, Khan and Muhammad Nadeem, Zafar and Mohammed Haji, Alhaji and Khairuddin, Sanaullah and Syed Rizwan, Shafqat and Shahzad, Murtaza and Suh, Cem Pang (2019) Development of amino-functionalized silica nanoparticles for efficient and rapid removal of COD from pre-treated palm oil effluent. Journal of Materials Research and Technology, 8 (1). pp. 385-395. ISSN 2238-7854

Syed Salman, Shafqat and Amirazam, Khan and Misbahulain, Khan and Shanti Faridah, Salleh and Mohd Syahmi, Jamaludin and Pang, Suh Cem (2017) Green synthesis and characterization of 3-carboxycoumarin and ethylcoumarin-3-carboxylate via Knoevenagel condensation. Asian Journal of Chemistry, 29 (2). pp. 261-266. ISSN 09707077

T

T.H.C, Yeo and I.A.W, Tan and M.O, Abdullah (2012) Development of adsorption air-conditioning technology using modified activated carbon – a review. Renewable and Sustainable Energy Reviews, 16. pp. 3355-3363.

Tamrin, Khairul Fikri and Zahrim, A.Y. (2017) Determination of optimum polymeric coagulant in palm oil mill effluent coagulation using multiple-objective optimisation on the basis of ratio analysis (MOORA). Environmental Science and Pollution Research. pp. 1-7. ISSN 09441344

Tan, I. A. W. and Chan, J.C. and Hameed, Bassim Hamid and Lim, Leonard Lik Pueh (2016) Adsorption behavior of cadmium ions onto phosphoric acid-impregnated microwave-induced mesoporous activated carbon. Journal of Water Process Engineering, 14. ISSN 22147144

Tan, Ivy A. W. and Abdul Latif, Bin Ahmad and Hameed, Bassim Hamid (2009) Adsorption isotherms, kinetics, thermodynamics and desorption studies of 2,4,6-trichlorophenol on oil palm empty fruit bunch-based activated carbon. Journal of Hazardous Materials, 164 (2-3). pp. 473-482. ISSN 0304-3894

Tan, Ivy A. W. and Abdul Latif, Bin Ahmad and Hameed, Bassim Hamid (2009) Fixed-bed adsorption performance of oil palm shell-based activated carbon for removal of 2,4,6-trichlorophenol. Bioresource Technology, 100 (3). pp. 1494-1496. ISSN 0960-8524

Tan, Ivy A. W. and Abdul Latif, Bin Ahmad and Hameed, Bassim Hamid (2008) Optimization of preparation conditions for activated carbons from coconut husk using response surface methodology. Chemical Engineering Journal, 137 (3). pp. 462-470. ISSN 1385-8947

Tan, Ivy A. W. and Abdul Latif, Bin Ahmad and Hameed, Bassim Hamid (2008) Preparation of activated carbon from coconut husk: Optimization study on removal of 2,4,6-trichlorophenol using response surface methodology. Journal of Hazardous Materials, 153 (1-2). pp. 709-717. ISSN 0304-3894

Tan, Ivy Ai Wei and Hameed, Bassim H. (2012) Removal of crystal violet dye from aqueous solutions using rubber (hevea brasillensis) seed shell-based biosorbent. Desalination and Water Treatment, 48 (1-3). pp. 174-181. ISSN 1944-3986

Tan, Ivy Ai Wei and Jamali, Nur Syakina and Ting, Winnie Huong Tien (2019) Phytoremediation of Palm Oil Mill Effluent (POME) Using Eichhornia crassipes. Journal of Applied Science & Process Engineering, 6 (1). pp. 340-354. ISSN 2289-7771

Tan, Yie Hua (2017) Production and Testing of Emulsified Biodiesel from Waste Cooking Oil Catalysed by Egg Based CaO Heterogeneous Catalyst in a Diesel Generator. PhD thesis, UNIMAS.

Tan, Yie Hua and Mohammad Omar, Abdullah and Cirilo, Nolasco-Hipolito and Yun Hin, Taufiq-Yap (2015) Waste ostrich- and chicken-eggshells as heterogeneous base catalyst for biodiesel production from used cooking oil: Catalyst characterization and biodiesel yield performance. Applied Energy, 160. pp. 58-70. ISSN 0306-2619

Tang, Chung Hieng. (2010) Performance study of an absorption cooling system under different energy sources. Masters thesis, Universiti Malaysia Sarawak, (UNIMAS).

Tay, C.C. and Hamdan, S. and Osman, M.S.B. (2016) Properties of Sago Particleboards Resinated with UF and PF Resin. Advances in Materials Science and Engineering, 2016. ISSN 1687-8434

Tee, Pei Fang (2017) A Combined Microbial Fuel Cell and Adsorption System for Bio-energy Production and Wastewater Treatment. PhD thesis, UNIMAS.

Tengku Ahmad Faris, Ku Yusoff and Mohd Farid, Atan and Nazeri, Abdul Rahman and Shanti Faridah, Salleh and Noraziah, Abdul Wahab (2015) Optimization of PID Tuning Using Genetic Algorithm. Journal of Applied Science & Process Engineering, 2 (2). ISSN 2289-7771

The Star (2013) A feather in the cap. [Corporate Memory] (In Press)

Ting, Winnie Huong Tien (2019) Optimisation of Phytoremediation Process for Ammoniacal Nitrogen Reduction in Wastewater. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Ting, Winnie Huong Tien and Tan, Ivy Ai Wei and Shanti Faridah, Binti Salleh and Noraziah, Binti Abdul Wahab (2018) Phytoremediation Of Ammoniacal Nitrogen In Wastewater Using Eichhornia Crassipes : Tolerance Limit And Ph Study. Malaysian Applied Biology, 47 (1). pp. 29-35. ISSN 0126-8643

U

Ullah, A. and Jamil, I. and Gillani, S.S.J. and Hamid, A. and Sanaullah, K. (2018) Investigation on hydrodynamics of gas fluidized bed with bubble size distribution using Energy Minimization Multi Scale (EMMS) mixture model. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3451-3460. ISSN 2231-8380 (online)

Ummie Zulaikha, Binti Kamarul Jaman (2017) Investigate the effectiveness of bio-silica absorbent from several sarawak palm oil waste ash. [E-LPTA] (Unpublished)

W

Wahi, Rafeah and Idris, Azni and Mohd Salleh, Mohamad Amran and Khalid, Kaida (2006) Biofuels from low-temperature microwave and conventional pyrolysis of sewage sludge. In: Proceeding of the International Symposium & Exhibition on Sustainable energy and environment ( ISESEE), 2006, Universiti Teknologi Mara, Sarawak.

Wee, Boon Siong and Mitsuru, Ebihara (2011) Comparative Study of Pga And INAA for Analyses Of Meteorite Samples. Jurnal Sains Nuklear Malaysia, 23 (2). pp. 74-80. ISSN 2232-0946

Wee, Hung Yee (2015) Potential application of bis-chalcone in plastic substrate solar cell device. [E-LPTA] (Unpublished)

Winnie, Anak Renang (2017) The effectiveness of a fabricated bio-filtration system in treating the domestic greywater. [E-LPTA] (Unpublished)

Winnie, anak Renang and Nur Amalina Shairah, Abdul Samat and Rubiyah, Baini and Md Rezaur, Rahman and Onni Suhaiza, Selaman (2018) The Effectiveness of a fabricated Bio-Filtration System in Treating the Domestic Greywater. Malaysian Applied Biology Journal, 47 (1). pp. 65-71. ISSN 0126-8643

Wong, E.T.S and Jawad, Z.A. and Chin, B.L.F. and Wee, S.K. (2018) A kinetic study of CO2 sorption improvement in the CA-CNTs mixed matrix membrane. IOP Conference Series: Materials Science and Engineering, 458 (1). ISSN 1757-8981

Wong, Leh Feng (2013) Conversion and characterization of biodiesel by transesterification of olive oil. [E-LPTA] (Unpublished)

Y

Yakub, I. and Mohammad, M. and Yaakob, Z. (2013) Effects of Zinc Chloride Impregnation on the Characteristics of Activated Carbon Produced from Physic Nut Seed Hull. Advanced Materials Research, 626. pp. 751-755.

Yakub, Ibrahim and Mohamed Sutan, N. and Mohd Said, K. A. and Anuar, Abudul Rahim and Yun Hin, Taufiq Yap (2016) Cu-Mn and Cu-Ce supported over agro-based carbons: Characteristics and NOx adsorption study. Journal of Materials and Environmental Science, 7 (9). pp. 3465-3476. ISSN 20282508

Yie, Hua Tan and Mohammad Omar, Abdullah and Cirilo, Nolasco-Hipolito and Nur Syuhada, Ahmad Zauzi (2017) Application of RSM and Taguchi methods for optimizing the transesterification of waste cooking oil catalyzed by solid ostrich and chicken-eggshell derived CaO. Renewable Energy & Power Quality Journal, 114. pp. 437-447. ISSN 2172-038X

Yong, Hui Sun (2015) Characterization of Pla-based nanocomposites in biomedical applications. [E-LPTA] (Unpublished)

Yong yin, Sia and Tan, I. A. W. and Mohammad Omar, Abdullah (2016) Adsorption of colour, TSS and COD from palm oil mill effluent (POME) using acid-washed coconut shell activated carbon: Kinetic and mechanism studies. MATEC Web of Conferences, 87. ISSN 2261236X

Z

Zainab, Ngaini and Mei Chee, Chua and Lian, Chin Lim (2014) A New Type of Banana Shape Bifunctional Monomer of Ester Chalcones. Malaysian Journal of Fundamental and Applied Sciences, 10 (2). pp. 53-58. ISSN 1823-626X

Zauzi, N.S.A. and Zakaria, M.Z.H. and Baini, R. and Rahman, M.R. and Mohamed Sutan, N. and Hamdan, S. (2016) Influence of Alkali Treatment on the Surface Area of Aluminium Dross. Advances in Materials Science and Engineering, 2016. ISSN 1687-8434

This list was generated on Tue Dec 10 09:41:35 2019 +08.