Items where Subject is "T Technology > TH Building construction"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | C | D | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | V | W | Y | Z
Number of items at this level: 100.


A. R., Abdul Karim and N. M., Sa’don and J. M., Ingham (2016) Structural dynamic response of an unreinforced masonry house using non-destructive forced vibration. Journal of Earthquake Engineering, 20 (1). pp. 1-11. ISSN 1363-2469

Afzan, Ahmad Zaini and Abdul Wafi, Razali and Gui, Hun Chuen and Nadia, Zaini and Sitti Diana, Tamjehi (2020) Assessing Strategies of Building Information Modeling (BIM)Implementation in Sarawak Construction Industry. IOP Conference Series: Earth and Environmental Science, 498. pp. 1-8.

Afzan Ahmad, Zaini and Intan Rohani, Endut and Nurzawani, Binti Md. Sofwan (2014) A Review in Developing a High Rise Building Construction Safety and Health Risk Model. InCIEC 2014. ISSN ISBN : 978-981-287-290-6

Afzan Ahmad, Zaini and Siti Akhtar, Mahayuddin and Nurzawani, Binti Md. Sofwan (2017) Exploring the construction safety risk drivers and risk prevention. Journal of Engineering and Applied Sciences, 12 (8). pp. 1952-1957. ISSN 1816-949X

Alifia, Hamzah Johari (2012) Erosion and Sediment Yields At Construction Site-A Case Study. Masters thesis, Universiti Malaysia Sarawak.

Amirul Ariffin, Bin Kassim (2010) Study on effect of window grilles for safety purposes on heat transfer in a building. [E-LPTA] (Unpublished)

Atta Idrawani, Bin Zaini and Bambang, Karsono and Awang Hasim, Bin Awang Sulong (2018) From sacred to secular : Baruk architecture on secular buildings in Sarawak. IOP Conference Series: Earth and Environmental Science, 213. 012-043. ISSN 1755-1315

Atthaillah, . and Saputra, E. and Fahrizal, E. and Bambang, Karsono and Fithri, C.A. (2020) Rapid material estimation for reinforced concrete construction utilizing a parametric tool for Aceh's postdisaster case. IOP Conference Series: Materials Science and Engineering, 796. pp. 1-6. ISSN 1757-899X

Ayagi, Kabiru Musa (2012) Investigating thermal comfort of abandoned low cost houses in Sarawak based on construction materials. Masters thesis, Universiti Malaysia Sarawak, (UNIMAS).


Bambang, Karsono and Julaihi, Bin Wahid and Mohamad Shihadeh, A. Arar and Bassim, Salleh (2020) Bamboo Application In Building Design : Case Study Of Green School, Bali, Indonesia. International Transaction Journal of Engineering, Management, & Applied Sciences & Technologies, 11 (7). pp. 1-8. ISSN 1906-9642

Bambang, Karsono and Yenny, Novianti and Nurhaiza, Soraya and Masthura, Hassan (2019) Place Attachment in Public Space Case Study: Hiraq Square Lhokseumawe, Aceh Indonesia. International Journal of Engineering & Technology, 8 (1.9). pp. 626-629. ISSN 2227-524X

Bong, J.H.L (2010) Study the Structural Behaviour of Ferrocement Beam. UNIMAS e-Journal of Civil Engineering, 1 (2).

Bong, Mei Lun. (2010) Effect of compressive stress in concrete on ultrasonic pulse velocity with different aspect ratios. [E-LPTA] (Unpublished)


Chai, WWS and Teo, DCL and Ng, CK (2013) Mechanical properties of concrete produced from waste oil palm shell (OPS) coated with PolyVinyl Alcohol (PVA) as aggregates. In: Sustainable Engineering Society Conference.

Cheng, Hock Tian (2001) Analysis and design of structural elements for a 5-storey residential building. [E-LPTA] (Unpublished)

Chin, T.Y (2009) Flexural and time dependent behavior of palm shell aggregate concrete beam. [E-LPTA] (Unpublished)

Chong, Chooi Yeng. (2010) Effect of compressive stress in concrete on ultrasonic pulse velocity. [E-LPTA] (Unpublished)

Chong, G.S.C (2000) Design of a water distribution system for proposed BDC Housing Development Scheme at Block 8 Klauh Land district, Sri Aman Division. [E-LPTA] (Unpublished)

Chung, Eddie Chie Jin (2003) The effect of concrete grade in detecting internal defects of concrete by ultrasonic pulse velocity method. [E-LPTA] (Unpublished)

Chung, Mui Zhi (2010) Development of ultra high strength concrete based on locally available materials and fly ash. [E-LPTA] (Unpublished)


Danggang, H. (2000) Optimum fine and coarse aggregates proportions to produce strength of concrete. [E-LPTA] (Unpublished)

Dasilah, bt. Ibrahim (2008) Design of stabilizing foundation for one-storey office building on peat soil. [E-LPTA] (Unpublished)


Faizal, Abd. Rahman (2004) Study on lighting in office buildings Kuching area. [E-LPTA] (Unpublished)


Gan, Leh Shiow and Liew, Siaw Sze and Chua, Huey See and Ngo, Choon Ping (2002) Web-based real estate management system. [E-LPTA] (Unpublished)

Goh, H.C (2009) Concrete mix design using crushed pebble as replacement material in concrete mixture. [E-LPTA] (Unpublished)


Hamizan, Sharbini and Nur Aisyah, binti Masrizal and Cheah, Wai Shiang and Chiu, Po Chan and Tan, Ping Ping and Noor Alamshah, Bolhassan and Azlina, Ahmadi Julaihi (2018) The Analysis of 2D Crowd Behaviour Simulation during Emergency Situation. In: 7th international Conference on Software and Computing Technologies (ICSCT), 7th - 9th April 2018, Kuala Lumpur, Malaysia.

Hanafiyah, Bin Othman (2010) Study on effect of insulation of wall to the building energy efficiency in hot and humid climate. [E-LPTA] (Unpublished)

Hasan, Alsidqi B.Mahmud and Kiet, Ting Wee and Sahdi, Fauzan and Linda Taib, Siti Noor and Sutan, Norsuzailina Mohamed and Aziz, Badhrulhisham Abdul and Fourie, Andy (2018) Temperature change and the total stress anomaly in paste backfill. International Journal of GEOMATE, 14 (44). pp. 90-95. ISSN 21862982

Hashim bin, Mohammad (2004) Remote control powerboat II (boat construction and engine installation). [E-LPTA] (Unpublished)

Hendison, Anak Jeralson Linang (1999) Scheduling production layout using simulation. [E-LPTA] (Unpublished)

Hu, W.K (2004) Comparative study of structural steel and reinforced concrete method : a project management case study. [E-LPTA] (Unpublished)

Huei, L.Z and Nee, T.S (2010) Time Provisions in Standard Forms of Local and International Construction Contract. UNIMAS E-Journal of Civil Engineering, 1 (2).


I.H, Achong (2000) Design a self-compacting concrete (scc) using local materials-study on workability and compressive strength. [E-LPTA] (Unpublished)

Ibrahim, S.H and Liew, A.A.H and Nawi, M.N.M and Yusoff, M. N (2015) Reinventing Traditional Malay House for Sustainable Housing Design: Obstacle and Proposed Solution. Jurnal Teknologi, 72 (1). pp. 97-102. ISSN 2180–3722


Johin, G. (2000) Optimum fine and coarse aggregates proportion to produce concrete strength. [E-LPTA] (Unpublished)


Kai, Chen Goh and Kamalludin, Bin Bilal and Hui, Hwang Goh and Sulzakimin, Mohamed and Chang, Saar Chai and Gui, Hun Chuen (2019) Cloud Computing Awareness in Malaysia Construction industry. International Journal of Recent Technology and Engineering, 8 (3S). pp. 71-76. ISSN 2277-3878

Kevin, ak Kemarau (2009) Low cost housing extension and effects to the structure. [E-LPTA] (Unpublished)

Khairul Anwar, Bin Zukiflee (2010) Creep and shrinkage deformation of frp sheet strengthened reinforced concrete beam. [E-LPTA] (Unpublished)

Kho, John Han Shyan (2009) Properties of polystyrene concrete bricks with silica fume. [E-LPTA] (Unpublished)

Kho, L.C. and Ngu, S.S. and A., Baharun and Lias, K. (2007) Signal Penetration towards Wooden Building Construction Materials. International RF and Microwave Conference, 2006. RFM 2006. ISSN ISBN: 0-7803-9744-4

Khor, J.A (2010) The effect of green roof technology and conventional zinc roof to different building materials in tropical climate. [E-LPTA] (Unpublished)

Khor, Jo Anne (2010) The effect of green roof technology and conventional zing roof to different building materials in tropical climate. [E-LPTA] (Unpublished)


Lam, C.Y (2004) Design and construction of attire dryer for high-rise building. [E-LPTA] (Unpublished)

Lau, H.H and Whyte, A. and Law, P.L. (2008) Composition and Characteristics of Construction Waste Generated by Residential Housing Project. International Journal of Environment Resource, 2 (3). pp. 261-268. ISSN 1735-6865

Liew, Yu Voon (2010) Long term deflection and cracking performance of palm shell aggregate concrete beam subjected to transverse loading. [E-LPTA] (Unpublished)

Lim, Tze Yin (2013) Determinants of construction industry profitability in Malaysia. Masters thesis, Universiti Malaysia Sarawak, (UNIMAS).

Ling,, I. H and Teo,, D.C.L. (2013) EPS RHA concrete bricks - A new building material. Jordan Journal of Civil Engineering, 7 (4). pp. 361-370. ISSN 1993-0461


Mah Yau Seng, Darrien (2017) Individual lot on-site stormwater detention underneath residential car porch. Universiti Malaysia Sarawak (UNIMAS), Kota Samarahan. ISBN 978-967-2008-45-3

Mahathir, Merjedi (2005) Factors affecting the workability of concrete incorporating PFA. [E-LPTA] (Unpublished)

Mastura, Mohamad (2006) Evaluation of fire protection system at UNIMAS mechanical laboratory. [E-LPTA] (Unpublished)

Mohamad Khairun, Ishak (2009) Thermal comfort in low cost housing at Bandar Baru Samariang, Sarawak. [E-LPTA] (Unpublished)

Mohamed, J.S.Z and Razali, I. (2011) Modified cement system : Durability and aesthetics. UNIMAS E-Journal of civil Engineering.

Mohamed Sutan, Norsuzailina and N.I.A., Ideris and S.N. L., Taib and D.T.C., Lee and A., Hassan and S.K., Sahari and K.A., Mohamad Said and H. R., Sobuz (2017) Microstructural characterization of catalysis product of nano cement based materials. E3S Web of Conferences. ISSN (In Press)

Mohammad Rodzi, Bin Haji Omar (2000) The energy studies on the Centre of Academic and Information System (CAIS) building UNIMAS. [E-LPTA] (Unpublished)

Muhammad Syukri, Imran (2017) Design and Development of Nocturnal Water Cooling System for Building Space Cooling in Malaysian Tropical Climate. PhD thesis, UNIMAS.

Mulyani, Rini and Raudhah, Ahmadi and Pilakoutas, Kypros and Hajirasouliha, Iman and Taufik, , (2015) A multi-hazard risk assessment of buildings in Padang city. Procedia Engineering, 125. pp. 1094-1100. ISSN 18777058

Musa, J. (2002) Application of acoustic emission (AE) technique in various materials (metal, woods and bricks). [E-LPTA] (Unpublished)


Nadia, Zaini and Afzan, Ahmad Zaini and Sitti Diana, Tamjehi and Abdul Wafi, Razali and Gui, Hun Chuen (2020) Implementation of Building Information Modeling (BIM) in SarawakConstruction Industry: A Review. IOP Conference Series: Earth and Environmental Science, 498. pp. 1-9.

Nawi, M.N.M and Shaharanee, I.N.M and Hashim, K.F. and Azman, M.N.A. and Ibrahim, S.H. (2015) Qualitative analysis on the barriers of industrialised building system (IBS) uptake in Malaysian construction projects. Advanced Science Letters, 21 (6). pp. 2134-2138. ISSN 1936-6612

New Sarawak, Tribune (2012) New varsity sports complex to boost standard of sports. [Newspaper Clipping] (In Press)

Ng, Wan Chi (2010) Development of ultra high strength concrete based on locally available materials and silica fume. [E-LPTA] (Unpublished)

Noorhaizat, Bin Sundin (2010) Komposit hampas sagu dalam pembuatan panel penyerap bunyi. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Norasyikin, bt. Md. Yusof (2009) Production of foamed concrete with a method of mixing. [E-LPTA]

Nur Fadilah, Binti Darmansah and Sitti Diana, Binti Tamjehi and Abdul Wafi, Bin Razali and Nadia, Binti Zaini and Sharifah NurFarhana, Binti Syed Sahimi (2019) Design concept of horse arena in Malaysia – A case study. IOP Conference Series: Materials Science and Engineering, 527 (1). pp. 1-7. ISSN 1757-899X

Nurashyikin, Pauzi. (2009) Properties of polystyrene concrete block with fly ash. [E-LPTA] (Unpublished)

Nurzawani, Binti Md. Sofwan and Afzan Ahmad, Zaini and Siti Akhtar, Mahayuddin (2016) Preliminary study on the identification of safety risks factors in the high rise building construction. Jurnal Teknologi, 78 (5-3). pp. 13-18. ISSN 2180–3722


Olarewaju, A.J. and Rao, N.S.V.K. and Mannan, M.A. (2011) Dimensionless response of underground pipes due to blast loads using finite Element Method. Electron. J. Geotech. Eng, 16. pp. 563-574.


Pathmanathan R., S/O Ramachanderan M. (2002) 2D air flow pattern simulation in Unimas permanent campus, Kota Samarahan Sarawak. [E-LPTA] (Unpublished)


Roslan, Q. and Ibrahim, S.H. and Affandi, R. and Mohd Nawi, M.N. and Baharun, A. (2016) A literature review on the improvement strategies of passive design for the roofing system of the modern house in a hot and humid climate region. Frontiers of Architectural Research, 5 (1). pp. 126-133. ISSN 2095-2635

Rosli, Mohamad Zin and Gui, Hun Chuen and Mukhtar, Che Ali (2009) AN OBSERVATION OF IMPACT IN IMPLEMENTATION OF QUALITY MANAGEMENT SYSTEM BY CONTRACTORS. Malaysian Construction Research Journal, 4 (1). pp. 52-71. ISSN 1985-3807


Saiful Bahari, Bin Hj Mohd Yusoff and Khairul Adha, Bin Abdul Rahim and Awangku Shahril, Bin Naqiuddin and Mohd Saufian, Suhaili (2017) Certificate of Gold Awards, Crab Housing Innovation for Local Community in Sarawak, INTEX17, DeTAR Putra UNIMAS, 17-18th May 2017. [Corporate Memory] (Unpublished)

Salemah, Bt. Sapudin (2001) Environmental Impact Assessment (EIA) study : Lee Ling housing development project. [E-LPTA] (Unpublished)

Sarawak Tribune (1994) UNIMAS to carry out EIA study on Bakun HEP. [Newspaper Clipping] (In Press)

Sebeli, K. (2009) Optimum mix of foamed concrete by using different materials. [E-LPTA] (Unpublished)

Sepawi, I. (2005) Seminar on finite element analysis and design of RC buildings, 25-26th May 2005. In: Seminar on finite element analysis and design of RC buildings, 25-26th May 2005.

Siti Halipah, Ibrahim and Nadia, Zaini and Azhaili, Baharun and Afzan Ahmad, Zaini and Dona Rose, Binti Koesmeri and Mohd Nasrun, Bin Mohd Nawi and Faizal, Baharum (2018) Embodied Energy and CO2 Analysis of Industrialised Building System (IBS) and Conventional Building System. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 51 (2). pp. 259-266. ISSN 2289-7879

Siti Zarini Binti, Mohamed Jizi (2009) Modified cement system :durability and aesthetic. [E-LPTA] (Unpublished)

Sitti Diana, Tamjehi and Afzan, Ahmad Zaini and Nadia, Zaini and Abdul Wafi, Razali and Gui, Hun Chuen (2020) Exploring Building Information Modeling (BIM) Awareness in Sarawak Construction Industry. IOP Conference Series: Earth and Environmental Science, 498. pp. 1-8.

Suara Sarawak, . (2019) Bangunan Fakulti Alam Bina diubah suai - SS. [Corporate Memory] (In Press)

Sylvester Razco, Anak Alak (2000) Method of construction of Bidayuh traditional house. [E-LPTA] (Unpublished)


Tan, K.E (2009) Durability consideration of foamed concrete. [E-LPTA] (Unpublished)

Tan, Let Hui (2020) Comparative Study on Precast and Conventional Building Constructions for Housing Project. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Tan, Siew Yea (2002) Building a small concrete house (materials and manpower costing). [E-LPTA] (Unpublished)

Ting, S.N and Khoo, H.K (2004) Project Management Development in Malaysia : A case study. In: Australian Institute of Project Management Conference, 10-12 October 2004.

Tsen, S.F (2006) Analisis of the process for traditional general contracting in Sarawak Malaysia. [E-LPTA] (Unpublished)


Universiti Malaysia Sarawak, Centre for Academic Information Services (2019) Gambar-gambar kampus tetap UNIMAS. [Image]

Universiti Malaysia Sarawak., Centre for Technology Transfer and Consultancy (CTTC) (2016) Environmental impact assessment for the proposed :Wawasan Beach Front Resort Hotel cum recreation establishment at lot 128, MCLD. Miri. Technical Report. Universiti Malaysia Sarawak, (UNIMAS).

Utusan Borneo (2018) Impian UNIMAS miliki hospital pengajar bakal jadi kenyataan. [Corporate Memory] (In Press)


Voon, Siaw Chee (2001) Analysis and design of structural elements for a 5-storey flat. [E-LPTA] (Unpublished)

Voon, Choon Siong (2010) Experimental evaluation of the effect of embedded insulating material and layered zone under roofing system. [E-LPTA] (Unpublished)


Wong, Gilbert Pak Kai (2012) Predicting progressive collapse for multi storey precast concrete building with different structural systems. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Wong, L.G (2009) Characteristics of laminated flooring materials. [E-LPTA] (Unpublished)

Wong, Timothy Leong Urn (2010) Sources of risk and related effects in the Malaysian construction industry. [E-LPTA] (Unpublished)


Yeong, C.L (2009) Penyelidikan Penggunaan konkrit buih sebagai bahan penimbusan untuk menggantikan pasir. [E-LPTA] (Unpublished)

Yu, Holson Shen (2009) Properties of pepper waste bricks. [E-LPTA] (Unpublished)


Zaidi, Bin Alwui (1998) Tendering and estimating for civil engineering project. [E-LPTA] (Unpublished)

Zaihasra, Binti Abu Talib (2000) Literature review on load-bearing masonry construction. [E-LPTA] (Unpublished)

Zaini, N. and Ibrahim, S.H. and Baharun, A. and Nawi, M.N.M. (2016) A review of embodied energy (EM) analysis of Industrialised Building System (IBS). Journal of Materials and Environmental Science, 7 (4). pp. 1357-1365. ISSN 2028-2508

Zualkafli, M.I.A (2009) Flexural and long term behavior of reinforced concrete beam. [E-LPTA] (Unpublished)

Zulhatta bin, Marzoki (2004) The roof technologies at low cost houses and the effect on thermal performance : materials. [E-LPTA] (Unpublished)

This list was generated on Wed Jul 8 02:34:52 2020 +08.