Items where Division is "Academic Faculties, Institutes and Centres > Faculty of Engineering" and Year is 2021

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | F | G | H | I | J | K | L | M | N | P | S | T | W | Y
Number of items: 91.

A

Abang Mohd Arif Anaqi, Abang Isa and Kuryati, Kipli and Ahmad Tirmizi, Jobli and Muhammad Hamdi, Mahmood and Siti Kudnie, Sahari and Aditya Tri, Hernowo and Sinin, Hamdan (2021) Pseudo-colour with K-means Clustering Algorithm for Acute Ischemic Stroke Lesion Segmentation in Brain MRI. Pertanika Journal of Science & Technology,, 29 (2). pp. 1-16. ISSN 0128-7702

Abdul Razak, Abdul Karim and Quenneville, Pierre and Norazzlina, M.Sa‘don (2021) Shear failure of the Meraka hardwood in bolted connections loaded parallel to the timber grain. In: The 13th International UNIMAS Engineering Conference 2020 (ENCON 2020), 27-28 October 2020, Kuching, Malaysia.

Afrasyab, Khan and Khairuddin, Sanaullah and Konstantinovich, Spiridonov Evgeny and Fedorovna, Khabarova Darya and Rigit, Andrew Ragai Henry and Ullah, Atta (2021) A study of the hydrodynamics of steam-assisted coal particles removal. International Journal of Energy and Environmental Engineering, 12 (1). ISSN 2251-6832

Ahmad Adzhar, Mohd Khairulzaim and Rezaur, Rahman and Lidyana, Binti Roslan and Muhammad Khusairy, Bakri and Afrasyab, Khan and Mohammed Mahbubul, Matin (2021) Analysis of Char Prepared by Pyrolysis of Dabai (Canarium odontophyllum) Nutshells as a Potential Precursor of Biocarbon Used for Wastewater Treatment. BioResources, 16 (3). pp. 5036-5046. ISSN 1930-2126

Ahmad B. H., Kueh (2021) Spent ground coffee – awaking the sustainability prospects. Environmental and Toxicology Management, 1 (1). pp. 1-2. ISSN 2777-0338

Ahmad Beng Hong, Kueh (2021) Spent ground coffee – awaking the sustainability prospects. Environmental and Toxicology Management, 1 (1). pp. 1-6. ISSN 2777-0338

Ahmed Mohamed, Ahmed Haidar and Smith, Vic and Elphick, Sean (2021) A multipurpose problem-based learning platform for education and research under smart grid umbrella. International Journal of Electrical Engineering & Education, 58 (1). pp. 3-32. ISSN 2050-4578

Amarjit, Singh and Zaida, Mustafa and Azrul Fazwan, Kharuddin and Mohd Farid, Atan (2021) AN APPLICATION OF FUZZY DELPHI TECHNIQUE TO MEASURE EXPERTS CONSENSUS ON COMMUNICATION SKILLS AMONG ENGINEERING GRADUATES. In: Global Education Conference and Postgraduate Colloquium 2021 (GECPC 2021), 8-9 September 2021, Online.

Anan Ayoub, Mustafa Dweekat (2021) Stochastic Scheduling of Distributed Microgrids with High Penetration Levels of Solar PV and Run of River Hydro Generation. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Annie, Joseph and Edward Ijau, Pelias Pog and Kho, Lee Chin and Bong, David Boon Liang and Dyg Azra, Awang Mat and Ngu, Sze Song and Rulaningtyas, Rilies (2021) Online Person Identification based on Multitask Learning. The International Journal of Integrated Engineering, 13 (2). pp. 119-126. ISSN 2600-7916

Annie, Joseph and Kho, Lee Chin and Boon, David Liang Bong and Dayang Azra, Awang Mat and Ngu, Sze Song and Edward Ijau, Pelias Pog and Rulaningtyas, Rilies (2021) Online Person Identification based on Multitask Learning. INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 13 (2). pp. 119-126. ISSN 2600-7916

Annisa, Binti Jamali and Jonathan, Peter Giman (2021) Performance Analysis of IOT based Flood Monitoring Framework in Sub-urban. In: 2021 IEEE 7th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA), 23-25 Aug. 2021, Bandung, Indonesia.

Azuka, Affam and Yonis M Yonis, Buswig and Al-Khalid, Hj Othman and Norhuzaimin, Julai and Ohirul, Qays (2021) A review of multiple input DC-DC converter topologies linked with hybrid electric vehicles and renewable energy systems. Renewable and Sustainable Energy Reviews, 135 (2021). pp. 1-23. ISSN 1364-0321

aiman Azrael, Shaiful Nahar Sukri and Siti Sarah Zahidah, Nazri and Muhamad Sukri, Hadi and Annisa, Binti Jamali and Hanim, Mohd Yatim and Intan Zaurah, Binti Mat Darus (2021) Hub Angle Control for A Single Link Flexible Manipulator Based on Cuckoo Search Algorithm. In: 2021 IEEE 7th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA), 23-25 Aug. 2021, Bandung, Indonesia.

B

Bibi Sarpinah, Sheikh Naimullah and Kasumawati, Lias and Norlida, Buniyamin and Mazlina, Mansor Hassan and Hazrul, Bin Mohamad Basri and Dzufi Iszafawaty, Bt. Ispawi (2021) SAR Evaluation Towards Breast Cancer in Hyperthermia Treatment. 2021 IEEE Symposium on Industrial Electronics & Applications (ISIEA) (2021). ISSN 2472-7660

C

Charlie, Chin Voon, Sia and J.S.Y., Wong and S.K, Thangavelu and K.H., Chong and Annie, Joseph (2021) Weibull Strength Analysis of Pineapple Leaf Fiber. Materials Science Forum, 1030 (2021). pp. 45-52. ISSN 1662-9752

Cheah, Ryan Wei Jie and Tan, Cha Yao and Teo, Fang Yenn and Goh, Boon Hoe and Mah, Yau Seng (2021) A Review of Managing Water Resources in Malaysia with Big Data Approaches. In: Water Management and Sustainability in Asia. Community, Environment and Disaster Risk Management (23). Emerald Publishing, United Kingdom, pp. 141-148. ISBN 9781800711150

Chin, Mei Yun and Rezaur, Rahman and Kuok King, Kuok and Chiew, Wai Yun and Muhammad Khusairy, Bakri (2021) Characterization and Impact of Curing Duration on the Compressive Strength of Coconut Shell Coarse Aggregate in Concrete. BioResources, 16 (3). pp. 6057-6073. ISSN 1930-2126

Chung Loong, Yiin (2021) A Molecular Simulation Study of Silica/Polysulfone Mixed Matrix Membrane for Mixed Gas Separation. Polymers, 2021 (13). pp. 1-28. ISSN 2073-4360

Chyntia Jaby, Entuni and Tengku Mohd Afendi, Zulcaffle (2021) Detecting Plant Leaf Diseases using Image Processing Techniques: A Survey. Journal of Plant Development Sciences, 13 (8). pp. 651-654. ISSN 2348-9170

D

D.Y.S., Mah and J.O.K., Ngu and Norazlina, Bateni and F.J., Putuhena (2021) Modelling the Outlet of Multi-Chamber Stormwater Detention System. Science and Technology Asia, 26 (3). pp. 77-89. ISSN 2586-9000, 2586-9027

Danish, Ahmed1 and Siti Noor Linda, Taib and Tahar, Ayadat2 and Alsidqi, Hasan (2021) A Review on the Behaviour of Combined Stone Columns and Pile Foundations in Soft Soils when Placed under Rigid Raft Foundation. ASM Science Journal, 16 (2021). pp. 1-8. ISSN 1823-6782

Davies, Gareth and Ahmed, El Sheikh and Catherine, Collett and Ibrahim, Yakub and McGregor, James (2021) Catalytic carbon materials from biomass. In: EMERGING CARBON MATERIALS FOR CATALYSIS. Elsevier Inc., pp. 161-196. ISBN 978-0-12-817561-3

Dayang Zulaika, Abang Hasbollah and Edy Tonnizam, Mohamad and Ramli, Nazir (2021) Numerical Modelling for Geoengineering in Tropical Region. UNIMAS Publisher, Universiti Malaysia Sarawak, 94300 Kota Samarahan, Sarawak, Malaysia.. ISBN 978-967-2298-47-2

F

Fahizan, Mahmud (2021) Experimental Investigation of Mixing Performance in Laser-fabricated Microfluidic Micromixers. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Faisal I., Chowdhury and Jahidul, Islam and A. K., Arof and M. U., Khandaker and Hossain M., Zabed and Ibrahim, Khalil and Md. Rezaur, Rahman and Shahidul, Islam and M. Razaul, Karim and Jamal, Uddin (2021) Electrocatalytic and structural properties and computational calculation of PAN-EC-PC-TPAI-I2 gel polymer electrolytes for dye sensitized solar cell application. RSC Advances, 37 (2021). pp. 22937-22950.

Farhana, Yasmin (2021) Effects of Environmental-Friendly Cutting Fluids on Surface Roughness and Tool Wear in Laser-Assisted High Speed Milling of Aluminium Alloy and 316 Stainless Steel. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Farhana, Yasmin and Khairul Fikri, Tamrin and Sheikh, N. A. (2021) Laser-assisted high speed machining of aluminium alloy: The effect of ultrasonic induced droplet vegetable-based cutting fluid on surface roughness and tool wear. Lasers in Engineering, 48 (4-6). 195 -225. ISSN 08981507

Farzana, Islam and Rezaur, Rahman and Mohammed, M. Matin (2021) The effects of protecting and acyl groups on the conformation of benzyl α-Lrhamnopyranosides: An in silico study. Turkish Computational and Theoretical Chemistry, 5 (1). pp. 39-50. ISSN 2602-3237

G

G.T., Leong and C.H.J., Bong and F.Y., Teo and Aminuddin, Ab. Ghani (2021) SWMM Modelling of Automated Hydraulic Flushing Gate as a Flow Control Structure. In: Water Management and Sustainability in Asia. Community, Environment and Disaster Risk Management, 23 . emerald, pp. 77-86. ISBN 978-1-80071-115-0

Gui, Hun Chuen (2021) Forging Green Building Literacy. [Magazine and Newsletter]

H

Hin, Charles Joo Bong and Liew, Chuin Liew and Fang, Yenn Teo and Tze, Liang Lau and Aminuddin, Ab Ghani (2021) Critical shear stress approach for self-cleansing design of a rectangular channel. International Journal of Sediment Research. ISSN 1001-6279

I

Islam, Dr. M. Shahidul and Eugene, J.J and Malcolm, M.M. and Hj Baini, Dr. Rubiyah and Shirley, J.T. (2021) OPTIMIZING DISCHARGEABLE EFFLUENT PRODUCTION FROM PALM OIL MILL EFFLUENT: AN EXPERIMENTAL RESEARCH. SCIENCE INTERNATIONAL, 33 (3). pp. 193-198. ISSN 1013-5316

J

JAM'AAH, SUUD (2021) Low Complexity Error Correction in Low Density Parity Check (LDPC) Code Decoder and Encoder for Decode and Forward Cooperative Wireless Communication. PhD thesis, Universiti Malaysia Sarawak.

Jacqueline Teo, Richard and Norazzlina, M.Sa'don and Abdul Razak, Abdul Karim (2021) Artificial Neural Network (ANN) Model for Shear Strength of Soil Prediction. Defect and Diffusion Forum, 411 (2021). pp. 157-168. ISSN 1662-9507

Jamilu, Usman and Mohd Hafiz Dzarfan, Othman and Ahmad Fauzi, Ismail and Mukhlis, A. Rahman and Juhana, Jaafar and Yusuf Olabode, Raji and Afeez O., Gbadamosi and Tijjani Hassan, El Badawy and Khairul Anwar, Mohamad Said (2021) An overview of superhydrophobic ceramic membrane surface modification for oil-water separation. Journal of Materials Research and Technology, 12 (2021). pp. 643-667. ISSN 2238-7854

John, Monnie and Mohammad Omar, Abdullah and Tan, Yie Hua and Cirilo, Nolasco-Hip�olito (2021) Techno-economical and Energy Analysis of Sunflower Oil Biodiesel Synthesis Assisted with Waste Ginger Leaves derived Catalysts. Renewable Energy, 168. pp. 815-828.

K

Kueh, A.B.H. and Siaw, Y.Y. (2021) Impact resistance of bio-inspired sandwich beam with side-arched and honeycomb dual-core. Composite Structures, 275 (2021). ISSN 0263-8223

L

Lai, Josephine Chang Hui and Khairul Hafiz, Masrun and Nooralinah, Madinah and Rubiyah, Baini and Nur Amalina Shairah, Abdul Samat (2021) PRODUCTION AND PERFORMANCE OF OKARA/SAGO AND OKARA/BANANA PEEL ORGANIC FERTILIZERS IN PLANTATION. Journal of Engineering Science and Technology, 20. pp. 1-15. ISSN 1823-4690

Lee Chin, Kho and Ji Liang, Hau and Sze Song, Ngu and Annie, Joseph and Siti Kudnie, Sahari and Mohd Ridhuan, Mohd Sharip and Shafrida, Sahrani (2021) A study on Gamification toward Engineering Students’ Engagement in the University Level. Turkish Online Journal of Qualitative Inquiry (TOJQI), 12 (6). pp. 9702-9711. ISSN 1309-6591

Lim, Min Khiong and Md., Safiuddin and Mohammad, Abdul Mannan and Resdiansyah, - (2021) Material Properties and Environmental Benefits of Hot-Mix Asphalt Mixes Including Local Crumb Rubber Obtained from Scrap Tires. Environments, 8 (47). pp. 1-24.

Lim, Soh Fong (2021) Agricultural Waste-Derived Adsorbents for Decontamination of Heavy Metals. In: Integrated Natural Resources Management. Springer, pp. 371-391.

Lim, Soh Fong (2021) Removal of Heavy Metal Ions Using Magnetic Materials. In: Integrated Natural Resources Management. Springer, pp. 393-409.

Loy, Adrian Chun Minh and Hatem, Alhazmi and Lock, Serene Sow Mun and Chung Loong, Yiin and Cheah, Kin Wai and Chin, Bridgid Lai Fui and How, Bing Shen and Suzana, Yusup (2021) Life-cycle assessment of hydrogen production via catalytic gasification of wheat straw in the presence of straw derived biochar catalyst. Bioresource Technology, 341 (2021). pp. 1-9. ISSN 0960-8524

M

M.S.Z.M, Suffian and A.N.H.A, zaini and Annisa, Binti Jamali and Shahrol, Mohamaddan and Muhd Fadzli, Ashari (2021) Reliable Smart Pet Feeding Machine Using Arduino Uno Starter Kit. IOP Conference Series: Materials Science and Engineering, 1101 (012033). pp. 1-7.

Mah, D.Y.S. and Ngu, J.O.K. and Bustami, R.A. and Putuhena, F.J. (2021) Case Study of Modular Pre-cast Concrete On-Site Stormwater Detention Susyem during Monsoon Season in Southeast Asia. Applied Environmental Research, 43 (1). pp. 28-40. ISSN 2287-075X

Maharani A., Bakar and Norizan, Mohamed and Danang A., Pratama and M. Fawwaz A., Yusran and Nor Azlida, Aleng and Yanuar Z., Arief and L., Niken (2021) Modelling lock-down strictness for COVID-19 pandemic in ASEAN countries by using hybrid ARIMA-SVR and hybrid SEIR-ANN. ARAB JOURNAL OF BASIC AND APPLIED SCIENCES, 28 (1). pp. 204-224. ISSN 2576-5299

Maimun, Binti Huja Husin and Mohd Fua’ad, Rahmat and Norhaliza, Abdul Wahab and Mohamad Faizrizwan, Mohd Sabri (2021) Neural Network ABAC with Dropout Layer for Activated Sludge System. Journal of Electrical Engineering, 20 (2-2). pp. 82-86. ISSN 0128-4428

Md. Rezaur, Rahman and Nur-Azzah Afifah, Taib and Muhammad Khusairy, Bakri and Siti Noor Linda, Taib (2021) Importance of sustainable polymers for modern society and development. Advances in Sustainable Polymer Composites. pp. 1-35.

Md.Rezaur, Rahman and Muhammad, Adamu and Sinin, Hamdan and Muhammad Khusairy, Bakri and Fahmi Asyadi, Md. Yusof and Afrasyab, Khan (2021) Optimization and characterization of acrylonitrile/MAPE/ nano‑clay bamboo nanocomposites by response surface methodology. Polymer Bulletin. pp. 1-29.

Mohamad Afif Zulhusmi, Alet and Norlena, Salamuddin and Lidyana, Binti Roslan (2021) Kesan Pengambilan Kopi Segera Berkafeina Terhadap Prestasi Larian Pecut 100m (The Effect Of Instant Coffee Consumption Towards 100m Sprint Performance). Jurnal Dunia Pengurusan, 3 (2). pp. 29-36. ISSN 2682-8251

Mohamad Raduan, Kabit and Syed Syabil Rahmat, Syed Sarkawi and MD Abdul Mannan, Mannan and Johnson Olufemi, Adebayo (2021) Effect of Silica Fume and Synthetic Fibre Towards the Compressive Strength of Modified Crumb Rubber Cement Mortar. Defect and Diffusion Forum, 411 (2021). pp. 135-143. ISSN 1662-9507

Mohamad Syamim, Hamsawi (2021) Development of Semi-automated Kek Lapis Sarawak Machine: Analysis on Baking and Cooking Processes. Masters thesis, Universiti Malaysia Sarawak.

Mohamad Syazwan Zafwan, Mohamad Suffian and Shahrol, Mohamaddan and Abg Mohd Aizuddin, Abg Mohd Mohtar (2021) Modal Analysis of Keropok Keping Drying Machine. Modal Analysis of Keropok Keping Drying Machine, 1062 (1). 012003-012004.

Mohd Danial, Ibrahim and Alyssa Asong, Ananthan and Sunami, Yuta and Barroy, Pierre (2021) Surface Modification Inspired by Malayopython Reticulatus for Friction Control. In: 7th World Tribology Congress 2021, 5th Sept 2021, Lyon, France.

Mohd Danial, Ibrahim and Philip, Susan and Lam, Su Shiung and Sunami, Yuta (2021) Evaluation of an Antifouling Surface Inspired by Malaysian Sharks Negaprion Brevirostris and Carcharhinus Leucas Riblets. Tribology Online, 16 (1). pp. 70-80. ISSN 1881-2198 (In Press)

Mohd Danial, Ibrahim and Sitti Aishah, Najamudin and Dayang Salyani, Abang Mahmod and Barroy, Pierre and Cantaluppi, Anna and Lejeune, Michaël and Zeinert, Andreas and Sunami, Yuta (2021) Poly-DL-Lactic Acid (PDLLA) Nanosheet Thin Films for Biomedical, Bioengineering and Energy Saving Applications. In: 7th World Tribology Congress 2021, 5th Sept 2021, Lyon, France.

Muhammad, Adamu (2021) Reinforced Bamboo Nanocomposites using Stabilized Polymers: Characterizations and Optimization. PhD thesis, Universiti Malaysia Sarawak (UNIMAS).

Muhammad Khusairy, Bakri and Md. Rezaur, Rahman and Siti Noor Linda, Taib and Law, Perry Nyuk Khui and Akshay, Kakar and Elammaran, Jayamani (2021) Nano-reinforcement in sustainable polymer composites. Advances in Sustainable Polymer Composites. pp. 231-243.

Musse, Mohamud Ahmed and Qays, Md Ohirul and Ahmed, Abu-Siada and Muyeen, S. M. and Hossain, Md Liton (2021) Cost-Effective Design of IoT-Based Smart Household Distribution System. MDPI, 5 (3). pp. 1-18. ISSN 1996-2021

N

N.A.S., Abdul Samat and U. Z., Kamarul Jaman and S., Saree and D. S. A., Mahmod and Lai, J. C. H. (2021) Characteristics of calcined palm oil pastes for biosilica extraction as a function of calcination temperatures. Journal of Applied Research and Technology, 19 (1). pp. 33-44. ISSN 1665-6423

Ngu, J.O.K. and Mah, D.Y.S. and Taib, S.N.L. and Mannan, Mohammad Abdul and Hoo, T.Y. (2021) Field Data Analysis of a Flooding Household Stormwater Detention System. Disaster Advances, 14 (5). pp. 51-57. ISSN 2278-4543

Norazlina, Bateni and Lai, S.H. and Rosmina, Ahmad Bustami and Mohammad, Abdul Mannan and Mah, Yau Seng (2021) A review on green pavement hydrological design and recommended permeable pavement with detention storage. IOP Conf. Series: Material Sciences and Engineering, 1101. pp. 1-14. ISSN 1757-899X

Norazzlina, M.Sa'don and Abdul Razak, Abdul Karim and Siti Noor Linda, Taib (2021) Comparative Strength of Fibre Reinforced Peat and Clayey-Silt by Using Shredded Scrap-Tire. Materials Science Forum Vol. 1030, 1030. pp. 124-137. ISSN 1662-9752

Norazzlina, M.Sa‘don and Abdul Razak, Abdul Karim and S.N.L., Taib and Edward, Anak Muol and Ling, Benson Jin Yaw and Angela, Ee (2021) Sri Aman peat: Settlement observation and geotechnical properties investigation. In: The 13th International UNIMAS Engineering Conference 2020 (ENCON 2020), 27th - 28th October 2020, Kuching, Malaysia.

Nur Amalina, Hilwane and Norazzlina, M.Sa'don and Abdul Razak, Abdul Karim (2021) Effect of Waste Tire Reinforcement with and Without Cement Additives on Peat Strength Improvement. Defect and Diffusion Forum, 411 (2021). pp. 121-133. ISSN 1662-9507

Nurhanna Zulaikha, Binti Ishak and Shahrol, Mohamaddan and Annisa, Binti Jamali and Shinichiro, Yamamoto and Helmy, Hazmi and Yee, Low Cheng and Akihiko, Hanafusa (2021) Experimental Analysis of Ankle Foot Orthosis Using Pneumatic Artificial Muscle. In: 11th Asian-Pacific Conference on Medical and Biological Engineering, May 25-27, 2020, Okayama Convention Center, Japan.

Nurul Mizatul Qamarina, Abdullah and Yee, Yong Lee and Yeong, Huei Lee and Hun, Chuen Gui and Andrew, Whyte (2021) Perception Analysis of Industrialized Building System (IBS) Implementation for G7 Contractors in Kuching, Sarawak. ASM Science Journal, 14. pp. 1-7. ISSN 1823-6782

P

Perry Law, Nyuk Khui and Rezaur, Rahman and Kuok, King Kuok and Muhammad Khusairy, Bakri and Muhammad, Adamu and Diana, Tazeddinova and Zhumayeva A., Kazhmukanbetkyzy, and Baibatyrov, Torebek (2021) Small-size Jatropha Seed Biochar Extracted from Microwave Pyrolysis: Optimization of Its Biocomposites Mechanical Properties by Mixture Design. Bio Resources, 16 (3). pp. 4716-4730. ISSN 1930-2126

S

S. N., Ting and V. C., Darrell and A. B. H., Kueh and Y. Y., Lee and C.K., Ng (2021) Extension of Time (EoT) Considerations in Construction Duration Estimate for Public Construction Projects. IOP Conference Series: Materials Science and Engineering, 1101 (2021). pp. 1-7. ISSN 1757-899X

Samo, Kamran and Rigit, Andrew Ragai Henry and Baharun, Azhaili (2021) The Development of a Preliminary Design for a TidalEnergy Plant. Engineering, Technology & Applied Science Research, 11 (1). pp. 6730-6733. ISSN 1792-8036

Sara, Ahmed and Zahraa, Al-Dawood and Farid, Abed and Mohammad Abdul, Mannan and Mufid, Al-Samarai (2021) Impact of using different materials, curing regimes, and mixing procedures on compressive strength of reactive powder concrete - A review. Journal of Building Engineering, 44 (2021). pp. 1-17.

Shahidul, Islam and Shahnur, Begum and Baini, R. (2021) RENEWABLE ENERGY POTENTIAL OF SUGARCANE WASTE BIOMASS: A REVIEW. Science International, 33 (3). pp. 231-236. ISSN 1013-5316

Shahrol, Mohamaddan and Magdalene, Andrew-Munot and Shirley, Johnathan Tanjong and SITI ZAWIAH BINTI, MD DAWAL and Keith, Case and Akihiko, Hanafusa (2021) Investigation of the Usage of Oil Palm Harvesting Tools on Work Related Musculoskeletal Disorders of Lower Limb. IEEE Eurasia Conference on Biomedical Engineering, Healthcare and Sustainability, 1 (2021). pp. 41-44. ISSN ISBN: 978-1-7281-9304-5 41

Sherra Bellina, Barrabas Kuta (2021) HC-SCR: NOx Reduction using Mn and Cu Catalysts Impregnated on Coconut Shell-based and Palm Kernel Shell-based Activated Carbon. Masters thesis, Universiti Malaysia Sarawak.

Shyue Leong, Lee (2021) Mechanical and Durability Performances of Geotextile Reinforced Polymer Concrete as Pavement Surface Course. PhD thesis, Universiti Malaysia Sarawak.

Siti Kudnie, Sahari (2021) Germanium Oxidation. UNIMAS Publisher, Universiti Malaysia Sarawak, 94300 Kota Samarahan, Sarawak, Malaysia.. ISBN 978-967-2298-46-5

Siti Kudnie, Sahari and Erdawaty, Binti Mohd Jaafar and Muhammad, Kashif and Low, Foo W. and Hoa, Nguyen D. and Awais, Ahmad and Anees, Abbas and Muhammad, Shafa and Ahsanulhaq, Qurashi (2021) Organic sensitization of graphene oxide and reduced graphene oxide thin films for photovoltaic applications. International Journal of Energy Research. pp. 1-10. ISSN 0363-907X

Siti Kudnie, Sahari and Muhammad, Kashif and Erdawaty, Mohd Jaafar and Foo, W. Low and Huo, Nguyen D. and Awais, Ahmad and Anees, Abbas and Zainab, Ngaini and Muhammad, Shafa and Ahsanulhaq, Qurashi (2021) Organic sensitization of graphene oxide and reduced graphene oxide thin films for photovoltaic applications. International Journal of Energy Research, 2021 (1). pp. 1-10. ISSN 1099-114X

Siti Rozana, Romali and Norazzlina, M.Sa'don and Abdul Razak, Abdul Karim (2021) Strength Enhancement of Fibre Reinforced Peat with Fly Ash as Stabilized Subgrade Layer. Defect and Diffusion Forum, 411 (2021). pp. 109-120. ISSN 1662-9507

Soh-Fong, Lim and Nur Amalina Naimah, Hamidon and Sukinah, Binti Abdul Karim and David Chua, S.N. and Lim, Bee Huah (2021) Preparation of Sago Bark-Derived Magnetic Adsorbent by Impregnation and Carbonation for Lead and Copper Ions Removal. Materials Science Forum, 1030 (1). pp. 159-168. ISSN 1662-9752

T

Tan, Ger Lian (2021) Improvement on Test Piece Mould Design for High Pressure Die Casting. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Then, M Y and Ramesh, S and Mohd Asrul, M A and Atan, M F and Abdul Halim Yun, H and Lai, J C H and Rahman, M R and Abdullah, M O and Abdul Wahab, N (2021) Dynamic Modeling of Hydrogen Production from Photo-Fermentation in Microbial Electrolysis Cell using Sago Waste. In: The 13th International UNIMAS Engineering Conference 2020 (ENCON 2020), 27-28 October 2020, Kuching, Malaysia.

W

WAN FARHANA, MOHAMAD (2021) Ni-Cr based Self Lubricating Composites with the Different Solid Lubricants Produced through Powder Metallurgy Method. PhD thesis, Universiti Malaysia Sarawak.

Wong, Chuan Yuen and Teo, Fang Yenn and Goh, Boon Hoe and Mah, Yau Seng (2021) Simulating Rainwater Harvesting System Performance for a Campus University in Malaysia. In: Water Management and Sustainability in Asia. Community, Environment and Disaster Risk Management, 23 (23). Emerald Publishing, United Kingdom, pp. 125-131. ISBN 9781800711150

Wong, Vei Ling and Kasumawati, Lias (2021) Metamaterial Applicator for Hyperthermia Cancer Treatment Procedure: Overview Study. IFMBE Proceedings, 81 (3rd). pp. 86-92.

Y

Yee Yong, Lee and Ahmad Beng Hong, Kueh and Yeong Huei, Lee (2021) Thermal Performance of Structural Lightweight Concrete Composites for Potential Energy Saving. Crystals, 11 (461). pp. 1-15. ISSN 2073-4352

Yi, Wen Kerk and Chin, Ying Teh and Tay, Kai Meng and Lim, Chee Peng (2021) Parametric Conditions for a Monotone TSK Fuzzy Inference System to be an n-Ary Aggregation Function. IEEE TRANSACTIONS ON FUZZY SYSTEMS, 29 (7). pp. 1864-1873. ISSN 1063-6706

Yiin, Chung Loong and Chai, Yee Ho and Mustakimah, Mohamed and Cheng, Yoke Wang and Lai, Bridgid Fui Chin and Suzana, Yusup and Lam, Man Kee (2021) A review on potential of biohydrogen generation through waste decomposition technologies. Biomass Conversion and Biorefinery. pp. 1-26. ISSN 2190-6823

Yiin, Chung Loong and Yap, Kok Liang and Ku, Andrian Zi En and Chin, Bridgid Lai Fui and Lock, Serene Sow Mun and Cheah, Kin Wai and Loy, Adrian Chun Minh and Chan, Yi Herng (2021) Recent advances in green solvents for lignocellulosic biomass pretreatment : Potential of choline chloride (ChCl) based solvents. Bioresource Technology, 333. pp. 1-12. ISSN 0960-8524

Yong, L.K. and Law, P.L. and Siti Noor Linda, Taib and Ngu, J.O.K. and Mah, Yau Seng and Law, S.L.G. (2021) A Study on Topography Versus Sediment Yield Under Simulated Rainfall. IOP Conf. Series: Materials Science and Engineering, 1101 (012019). p. 10. ISSN 1757-899X

This list was generated on Wed Sep 29 06:27:17 2021 +08.