Items where Division is "Academic Faculties, Institutes and Centres > Faculty of Engineering
Faculties, Institutes, Centres > Faculty of Engineering" and Year is 2006

A

Abang Mohammad Nizam, Abang Kamaruddin (2006) Micro Hydro turbine (Design and fabrication). [Final Year Project Report] (Unpublished)

Abdul Farid, Abdul Rahman (2006) Experiment of flame spread on plywood. [Final Year Project Report] (Unpublished)

Aluyah, Sipi (2006) Design and finite element analysis of solid expandable tubular. [Final Year Project Report] (Unpublished)

Augustine Paka, T. (2006) Supply chain management (SCM) practice. [Final Year Project Report] (Unpublished)

B

Bajuri, E.N (2006) Creep of Untreated donax grandis polymer composites. [Final Year Project Report] (Unpublished)

Bausah, A. (2006) Evaluation and analysis on existing sanitary landfill's liner and leachate collection systems. [Final Year Project Report] (Unpublished)

Bertram, Anak Thomas (2006) Study on a method of slope stability analysis used for landfill slope. [Final Year Project Report] (Unpublished)

Bong, Shin Feng (2006) Development of a moving object tracking system. [Final Year Project Report] (Unpublished)

Bong, Yung Foo. (2006) The effectiveness of additional separate lanes as right turn and u-turn facility at signalized intersection on queue probability and delay. [Final Year Project Report] (Unpublished)

C

Chee, Khoon Ng and Kiang, Hwee Tan (2006) Flexural behaviour of externally prestressed beams. Part I: Analytical model. Engineering Structures, 28 (4). pp. 609-621. ISSN 0141-0296

Chee, Khoon Ng and Kiang, Hwee Tan (2006) Flexural behaviour of externally prestressed beams. Part II: Experimental investigation. Engineering Structures, 28 (4). pp. 622-633. ISSN 0141-0296

Chew, Meng Yew (2006) Deformation of wood in compression due to moisture content changes. [Final Year Project Report] (Unpublished)

Chong, C.T (2006) Determination of civil engineering construction time duration. [Final Year Project Report] (Unpublished)

Chong, Huey Ching (2006) Experimental study on the properties of local coarse aggregate in Sarawak. [Final Year Project Report] (Unpublished)

Chong, Kok Hing (2006) Energy analysis of biomass from agricultural waste. [Final Year Project Report] (Unpublished)

Chong, Kok Hing (2006) Exergy analysis of biomass from agricultural waste. [Final Year Project Report] (Unpublished)

D

Daniel,, Ting Moi Lee. (2006) Feasibility study of pohon Mas Restaurant air-condationing system. [Final Year Project Report] (Unpublished)

Dayang Lydiawati, Awang Jemat. (2006) Design and analysis beams for a four storey stell structure using csc software. [Final Year Project Report] (Unpublished)

Dayang Nur Rafiza, Binti Awang Yusuf. (2006) Application of axiomatic concept to improve the portable crane design. [Final Year Project Report] (Unpublished)

Dayang Suhaila, Awang Suhaili (2006) Estimating Missing Precipitation to Optimize Parameters for Prediction of Daily Water Level Using Artificial Neural Network. [Final Year Project Report] (Unpublished)

Diana, Laja (2006) Solid waste treatment and disposal for rural area. [Final Year Project Report] (Unpublished)

Dominic Anak, Winston Bale. (2006) Water piping and drainage system in a building. [Final Year Project Report] (Unpublished)

E

Eugene Chanel, Anak Jimbap. (2006) Design of a water reticulation system for proposed desa ilmu phase 15, 18 and 19 housing scheme at Samarahan Land district, Sarawak. [Final Year Project Report] (Unpublished)

Ewat, Pedo (2006) Development and performance tests of a sedimentation trap for silt and clay particles. [Final Year Project Report] (Unpublished)

F

Farina, Unus (2006) Study on recycling programs in Kuching. [Final Year Project Report] (Unpublished)

Franky, Ajie (2006) A comparison between eurocode 3 (1992) and British standard 5950 (2000) for flexural member design. [Final Year Project Report] (Unpublished)

H

Hamdan, S. and Liew, F.K and Osman, M.S (2006) The relationship between the applied torque and stresses in post-tension structures. In: 9th European Conference on Non Destructive Design, 25-29 September 2006. (Unpublished)

Hamiza, Mohamad Salleh. (2006) Evaluation of sight distance at an intersection with stop sign control. [Final Year Project Report] (Unpublished)

I

Ibrahim Manai, Abdul Hakim (2006) Design and fabrication of an improved crack growth testing apparatus with stress corrosion cracking (SCC) study. [Final Year Project Report] (Unpublished)

Iffah, Mohamed @ Mohamad Saim (2006) Designing uart by using gate-lever implementation. [Final Year Project Report] (Unpublished)

J

Jenny Kuihoon, Anak Kulu (2006) Application of infoworks modeling for flood mapping of Maong River. [Final Year Project Report] (Unpublished)

K

Keli, H. (2006) A feasibility study on methods of construction over peat soils. [Final Year Project Report] (Unpublished)

Kenny Adams, Ajang. (2006) A study on silt and clay particles settling characterics in channels. [Final Year Project Report] (Unpublished)

Khairul Khuzaimah, Abdul Rahim (2006) Study on collection and transportation of waste in Kota Samarahan. [Final Year Project Report] (Unpublished)

L

Law, P.L and Michael J., Ellenbecker and Ng, Chee Khoon (2006) Hazard Rating of Substances Systems Developed by Niosh’s Rtecs-Nohs and Usepa. The Institution of Engineers, Malaysia, 67 (1). ISSN 0126-513X

Law, P.L and Ngu, Lock Hei and Wong, Kien Kuok and Awangku Abdul Rahman, Pgn. Hj. Yusof (2006) Development And Performance Tests Of A Separator For Removal Of Physically Emulsifiedand Free Oils From Wastewaters. The Institution of Engineers, Malaysia, 67 (2). pp. 10-19. ISSN 0126-513X

Law, Puong Ling and Ngu, Lock Hei and Wong, Kien Kuok and Awangku Abdul Rahman, Pgn. Hj. Yusof (2006) Development and performance tests of a separator for removal of physically emulsified and free oils from wastewaters. IEM Journal, 67 (2). pp. 10-19. ISSN 0126-513X

Liew,, Fui Fath (2006) Biomass conversions from agriculture waste; potiential of biomass resources in Sarawak. [Final Year Project Report] (Unpublished)

Liew,, Kiat Juang. (2006) Production scheduling practice. [Final Year Project Report] (Unpublished)

Lim, Kok Ping (2006) Flow processes of bottleneck formation at modern roundabout intersection : a case study at Kota Samarahan. [Final Year Project Report] (Unpublished)

Lim,, Chia Cheen (2006) Amateur radio based weather station. [Final Year Project Report] (Unpublished)

Lim,, Tze Chiat (2006) Development of an effective meter reading system. [Final Year Project Report] (Unpublished)

Loh, Ling Ping (2006) Finite element analysis of seepage flow under a sheet pile. [Final Year Project Report] (Unpublished)

M

M.O., Abdullah and Y.K., Gan (2006) Feasibility study of a mini fuel cell to detect interference from a cellular phone. Journal of Power Sources, 155. pp. 311-318. ISSN 0378-7753

Madihi, A. (2006) Retrofit design on lighting system. [Final Year Project Report] (Unpublished)

Mah, Yau Seng. (2006) Flood hydrograph reconstructing for Sarawak kanan river using infoworks river simulation (RS). Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Marlene Clarissa, Thomas Likup. (2006) Teamwork in civil engineering -past, present, and future. [Final Year Project Report] (Unpublished)

Mastura, Mohamad (2006) Evaluation of fire protection system at UNIMAS mechanical laboratory. [Final Year Project Report] (Unpublished)

Mohammad, Abdul Mannan and Teo, Delsye Ching Lee and Kurian, V. J. (2006) Flexural Behaviour of Reinforced Lightweight Concrete Beams Made with Oil Palm Shell (OPS). Journal of Advanced Concrete Technology, 4 (3). pp. 1-10. ISSN 1347-3913

Mohammad, Abdul Mannan and Teo, Delsye Ching Lee and Kurian, V. J. (2006) Influence of Site Curing on Bond Properties of Reinforced Lightweight Concrete. Journal of Civil Engineering Research and Practice, 3 (1). pp. 9-19. ISSN 1729-5769

Mohammad, Abdul Mannan and Teo, Delsye Ching Lee and Kurian, V. J. (2006) Structural Concrete Using Oil Palm Shell (OPS) as Lightweight Aggregate. Turkish Journal of Engineering and Environmental Sciences, 30 (4). pp. 251-257. ISSN 1303-6157

Mohammad, Abdul Mannan and Teo, Delsye Ching Lee and Kurian, V. J. (2006) Structural behaviour of singly reinforced OPS beams. In: Proceedings of the 6th Asia-Pacific Structural Engineering and Construction Conference (APSEC 2006), 5 – 6 September 2006, Kuala Lumpur, Malaysia.

Mohammad Bakhtiar, B. Johari (2006) Feasibility study on implementing modular production system. [Final Year Project Report] (Unpublished)

Mohammad Hafiz, b. Hj. Amran (2006) Inventory control practices. [Final Year Project Report] (Unpublished)

Mohammad Ishamudin, Ismail (2006) Storm rainfall analysis for upper Rajang River Catchment. [Final Year Project Report] (Unpublished)

Muhammad Sadli, Bin Abdllah. (2006) Planning analysis for inland navigation developing in the Baram river using logical framework approach. [Final Year Project Report] (Unpublished)

N

Nail, Frankie Anak (2006) Traffic calming devices :application and its effectiveness. [Final Year Project Report] (Unpublished)

Ng, CK and Wong, W.J and Marini, L. (2006) Finite section analysis of RC Beams prestressed with external tendons at ultimate limit state. In: -.

Noor Suraya, Romali. (2006) Organic soil stabilization by different types of admixtures. [Final Year Project Report] (Unpublished)

Noraini, Asakil (2006) Finite elements on bond strenght of adhesive / polymeric composites system. [Final Year Project Report] (Unpublished)

Noraizah, Binti Ugang. (2006) Development of photoelastic experiment. [Final Year Project Report] (Unpublished)

Norikhsan, Bin Haji Anuar (2006) Experimental study of fluid flow in a double L-bend pipe with small nozzle outlets. [Final Year Project Report] (Unpublished)

Nuraisyah, Binti Siddek (2006) Measuring current leakage in cmos. [Final Year Project Report] (Unpublished)

Nurul Hidayah, binti Hairuddin (2006) A high speed tristate buffer. [Final Year Project Report] (Unpublished)

P

P. L., Law and S. C., Gracie Chong and A., Baharun and A., Abdul Rahman (2006) A comparison of nearby incremental ground level and in plant concentrations of air pollutants emitted from electronics facilities. International Journal of Environmental Science & Technology, 3 (3). pp. 243-250. ISSN 1735-1472

Priscillina Anak Petrus, @ Petrus Igat. (2006) Methods of construction of modern house emphasizing on building thermal performance. [Final Year Project Report] (Unpublished)

R

Ramfauzan, Ramlee (2006) Design and fabrication of ice crusher. [Final Year Project Report] (Unpublished)

Rani, Anak Kaba (2006) Vibration properties of wood. [Final Year Project Report] (Unpublished)

Razali, N.T (2006) Creep behaviour of donax grandis fibre-reinforced polymer composites in hygric condition. [Final Year Project Report] (Unpublished)

Roselyn,, Lim Sheau Chee. (2006) Performance of schmitt trigger. [Final Year Project Report] (Unpublished)

S

Sahari, Z.R (2006) Modeling of human technical factors interrelationship in maintaining civilalian aircraft safety. [Final Year Project Report] (Unpublished)

Saiful Adli, Bin Yaman (2006) Flexural test of untreated elais guineesis polymer composites. [Final Year Project Report] (Unpublished)

Sarimah, Mat Hashim (2006) Project evaluation : a case study of cost reduction in changing machine design. [Final Year Project Report] (Unpublished)

Shahrul, Bin Shafiee (2006) Hydraulic conductivity of tropical peat soil. [Final Year Project Report] (Unpublished)

Shahrulnizamakmar, Bin Din (2006) Comparative performance of solar dryers for drying fruits. [Final Year Project Report] (Unpublished)

Sitihanafiah, Binti Ruasin (2006) Design of a single storey using steel structural elements. [Final Year Project Report] (Unpublished)

T

Terence, Jerome Daim. (2006) Mini service provider. [Final Year Project Report] (Unpublished)

The Borneo Post (2006) Eight Unimas engineering students receive Zecon awards. [Newspaper Cutting] (In Press)

Tony Kismoor, anak Sasak. (2006) Physical and geotechnical properties of coal ash. [Final Year Project Report] (Unpublished)

Tsen, S.F (2006) Analisis of the process for traditional general contracting in Sarawak Malaysia. [Final Year Project Report] (Unpublished)

Tsen, Soo Fui. (2006) Analisis of the tender process for traditional general contracting in Sarawak Malaysia. [Final Year Project Report] (Unpublished)

V

Voon, Chun Yung (2006) Evaluation of 'Perahu Tambang' engine performance and exhaust emission. [Final Year Project Report] (Unpublished)

W

Weili, Siong. (2006) Qualitative study of quality awareness and enhancement through interactive training tool. [Final Year Project Report] (Unpublished)

Wilmi, Anak Nyokiew (2006) The investigation into quantifying optimum viscosity of scc mix design. [Final Year Project Report] (Unpublished)

Wong, Woan Jiuan (2006) Modelling and parametic study of externally presstressed beams at ultimate limit state. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Wong,, Kristy (2006) A baseline study on the impact of hazel for air polution mitigation. [Final Year Project Report] (Unpublished)

Y

Yee, M.F (2006) Designing 8-Bit multiplier. [Final Year Project Report] (Unpublished)

Yong,, Weng Kheong. (2006) Design and fabrication of solar chimney. [Final Year Project Report] (Unpublished)