Items where Division is "Academic Faculties, Institutes and Centres > Faculty of Engineering
Faculties, Institutes, Centres > Faculty of Engineering" and Year is 2005

A. K. A., Razak and Roberts, T. M. and Bridle, R. J. (2005) ALUCONCRETE COMPOSITE BEAMS AND ARCHES. ASEAN JOURNAL ON SCIENCE AND TECHNOLOGY FOR DEVELOPMENT, 22 (1&2). pp. 107-120. ISSN 0217-5460

Abd. Rahman, Hashim. (2005) Experimental study on the mix proportions of high strength concrete. [Final Year Project Report] (Unpublished)

Abdul Mutalib Faisal, Lampong (2005) Crack detection in welded joint. [Final Year Project Report] (Unpublished)

Adrian, John Ngau (2005) Hydrologic modeling with hec-hms :sungai Sarawak Kiri Basin. [Final Year Project Report] (Unpublished)

Ahmad Zuwairisyazwan, Bin Mohd Najib (2005) Validity study using energy - 10 software in a simple building. [Final Year Project Report] (Unpublished)

Asrul Effendy, Ismail. (2005) Design and construction of mini wind generatior. [Final Year Project Report] (Unpublished)

Awang Sadit, D.D (2005) The influence of limited parking availability and pricing on travel pattern to reduce traffic congestion. [Final Year Project Report] (Unpublished)

Benedict, Angkui. (2005) The strength development of concrete incorporating 20% PFA using W/C 0.50 and 0.45. [Final Year Project Report] (Unpublished)

Brenda, Anak Norbert Rabar. (2005) Case study : understanding the principle and mechanism of alternator motor. [Final Year Project Report] (Unpublished)

Chai, A. and Rigit, A.R.H. and Ha, H.U (2005) Heat transfer and computational simulations on the drying process of a KILN. In: Proceedings of HT 2005 : American Society of Mechanical Engineer (ASME).

Chai, Peng How. (2005) Ultrasonic pulse velocity (UPV) test on concrete under compression : a study on effect of aspect ratio. [Final Year Project Report] (Unpublished)

Chieng, Yew Kai. (2005) Effect of moisture content (hygric) on the mechanical properties for different fibre volume fractions of donax grandis natural fibres reinforced unsaturated polyester composites. [Final Year Project Report] (Unpublished)

Chong, Kah Weng. (2005) Modelling hourly runoff using ann for sg. Sarawak Kanan Basin. [Final Year Project Report] (Unpublished)

Chua, Keng Yew. (2005) Material Requirements planning (MRP) practices in Melaka manufacturing companies. [Final Year Project Report] (Unpublished)

Dominic Bechat, anak Nanang (2005) Energy audit on a dyrer in a local ceramic industry. [Final Year Project Report] (Unpublished)

Dorothy, Chai Sin Yee (2005) Dispute resolution methods in the construction industry. [Final Year Project Report] (Unpublished)

Eng, K.S (2005) Cracking behavior of donax grandis natural fibre reinforced polymer composite. [Final Year Project Report] (Unpublished)

Fabian, anak Mikie (2005) Advance study of solar attire dryer. [Final Year Project Report] (Unpublished)

Fakulti, Kejuruteraan (2005) Hari Keluarga Fakulti Kejuruteraan 2005. [Picture] (Unpublished)

Fakulti, Kejuruteraan (2005) ISCAAD workshop 2005. [Picture]

Fakulti, Kejuruteraan (2005) Majlis Fakulti Kejuruteraan 2005. [Picture] (Unpublished)

Fong, A.W.Y (2005) Unified design approach for structural concrete based on eurocode 2. [Final Year Project Report] (Unpublished)

Gaddafi, Ismaili (2005) Experimental study on the behaviour of shrinkage and compaction between peat and modified peat soil. [Final Year Project Report] (Unpublished)

Gregory, George Kinsim (2005) Design and build as procurement method in Malaysia ~ selection and evaluation procedures. [Final Year Project Report] (Unpublished)

Helmi, Mohamad Jamil. (2005) Experimental study on the factor affecting coagulation and flocculation. [Final Year Project Report] (Unpublished)

Henry Rigit, A.R and Labadin, J. and Chai, A. and Ho, J. (2005) Fluid flow simulation in a double L-bend pipe with small nozzle outlets. In: 3rd International Conference on Computational Methods in Multiphase Flow, 31 October - 2nd November 2005.

Henry Sidie, Sulang. (2005) The effect of road geometric (Gradient and curve) on friction value for interlocking concrete pavement. [Final Year Project Report] (Unpublished)

Hon, K.K (2005) Design, fabrication & experimental study of a mini solar cooling refrigerator for mechanical application. [Final Year Project Report] (Unpublished)

Khairul Amin, Othman (2005) Modelling and fabricating subsonic wing. [Final Year Project Report] (Unpublished)

Kho Joo, Tiong (2005) Effect of fine content on shear strength of sand. [Final Year Project Report] (Unpublished)

Lai, Sai Hin (2005) Determination of composite friction factor and manning roughness coefficient for Discharge estimation in natural compound channels. PhD thesis, Universiti Malaysia Sarawak (UNIMAS).

Latif, Yok (2005) The polished stone value of local aggregates in Sarawak and its performance on skidding resistance. [Final Year Project Report] (Unpublished)

Law, P.L and Ng, Chee Khoon and Ha, How Ung and Lau, Hieng Ho (2005) Analysis and Design of Jobs for Control of Cumulative Trauma Disorders: Plastic Forks/Spoons Packing Job. The Institution of Engineers, Malaysia, 66 (3). ISSN 0126-513X

Lelly, Marini (2005) Finite cross section analysis for externally prestressed beams at ultimate flexure limit state. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Lydia Kristen, Binti Edward Mongudal (2005) Modelling of reinforced concrete beam for flexural behaviour. [Final Year Project Report] (Unpublished)

M.O, Abdullah and S.L, Leo (2005) Feasibility study of solar adsorption technologies for automobile air-conditioning. In: Proceedings of ISEC2005, International Solar Energy Conference, 6-12 August 2005.

Mahathir, Merjedi (2005) Factors affecting the workability of concrete incorporating PFA. [Final Year Project Report] (Unpublished)

Mark, Jana (2005) A laboratory investigation of engineering properties of crushed asphalt and concrete wastes as unbound road materials. [Final Year Project Report] (Unpublished)

Matius, Juanis. (2005) The impact of using automation technology in high technology manufacturing company. [Final Year Project Report] (Unpublished)

Mensan, Anak Gandai. (2005) Analysis of pile group. [Final Year Project Report] (Unpublished)

Mohamad Asrul, Mustapha (2005) Surface preparation and adhesive joining. [Final Year Project Report] (Unpublished)

Mohamad Hezan Andy, Bin Mohamad Sait (2005) Optimum mix design for concrete incorporating PFA from Sejingkat power station, Kuching. [Final Year Project Report] (Unpublished)

Mohd. Effendi, Bin Abdullah. (2005) Thermal comfort for office work with special reference to Kuching area. [Final Year Project Report] (Unpublished)

Mustafa, Rujhan (2005) The Dynamism of East Asian Economic Integration. In: 9th International Conference on Global Business & Economic, Seoul Korea, 24-28 May 2005.

Ng, CK (2005) Flexural strengthening of RC beams via external prestressing. In: International Conference on Concrete repair, Rehabilitation & Retrofitting, 21-23 November 2005.

Noor Zaniza Wati, Zainol (2005) Thermal properties of tile and marble. [Final Year Project Report] (Unpublished)

Noridham, Mohamad. (2005) Experimental study on the high strength concrete with different fine aggregate. [Final Year Project Report] (Unpublished)

Nurul Wahida, Azmi (2005) Effect of fine content on compaction characteristics of sand. [Final Year Project Report] (Unpublished)

Ong, Chee Zen (2005) Slope stability analysis. [Final Year Project Report] (Unpublished)

Ong, Khin Kiat. (2005) Daily rainfall runoff modeling using artificial neural network for sungai Sarawak Kanan upper catchment. [Final Year Project Report] (Unpublished)

Peter Anderson, anak Joseph (2005) Construction of a crack growth testing apparatus associated with stress corrosion cracking (SCC) study. [Final Year Project Report] (Unpublished)

Pl. Yasslin Assin @ Salihin, Yassin. (2005) Droplet charge estimates from charge and mass flux data. [Final Year Project Report] (Unpublished)

Prakash a/l, Vijaya Kumar (2005) Water quality study on rivers in Sarawak. [Final Year Project Report] (Unpublished)

Putuhena, F.J. and Galang, J.A (2005) Logical frame work approach and integrated water resources management in the Sarawak River Basin. In: Modelling tools for Environment & resources Management (MTERM) International Conference, 6-10 June 2005.

Putuhena, F.J. and Mah, D.Y.S. and Hin, Lai Sai (2005) Floodplain Mapping and Visualization for Flood Risk Assessment and Decision Support in Sarawak Kanan River. Journal of Environmental Systems, 32 (3). pp. 201-219. ISSN 1541-3802

Ramie, anak Punas. (2005) Experimental studies on biomass combustion to produce energy. [Final Year Project Report] (Unpublished)

Rosmina, Binti Ahmad Bustami (2005) Water level prediction for rivers under tidal influence using artificial neural network. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).

Sarkawi, Buang. (2005) Crack detection of ceramic tile using acoustic emission. [Final Year Project Report] (Unpublished)

Sepawi, I. (2005) Seminar on finite element analysis and design of RC buildings, 25-26th May 2005. In: Seminar on finite element analysis and design of RC buildings, 25-26th May 2005.

Sri Rumi Melanos, Bin Basri (2005) The effect of different pitch of the roof for ventilation. [Final Year Project Report] (Unpublished)

Tang,, Chung Hieng. (2005) Solar Absorption air conditioning. [Final Year Project Report] (Unpublished)

Universiti Malaysia Sarawak, Faculty of Engineering (2005) Minit mesyuarat khas, Jabatan Kejuruteraan Kimia & Sustainabiliti Tenaga, Bilik Perbincangan Fakulti Kejuruteraan, 25 April, 2008, 10.00 pg. [Minutes of Meeting] (Unpublished)

Universiti Malaysia Sarawak, Faculty of Engineering (2005) Osaka Gas Award 2005. [Picture] (Unpublished)

Universiti Malaysia Sarawak, Faculty of Engineering (2005) Zecon Engineering Berhad Excellence Award 2005. [Picture]

Verawaty, Binti Hj. Ismail (2005) Creep behaviour of oil palm empty fruit bunch (EFB) fibre - polyester composite. [Final Year Project Report] (Unpublished)

Wahap, B. Abu Bakar (2005) A study of storm rainfall characteristics in Samarahan district. [Final Year Project Report] (Unpublished)

Wong, S.J.U (2005) Study of humidity in box type solar cooker. [Final Year Project Report] (Unpublished)

Wong Seak, Yeo (2005) The Study of the Compressibility Characteristics of Soft Soil in Sarawak. [Final Year Project Report] (Unpublished)

Wong,, Siong Ji Ung. (2005) Study of humidity in box type solar cooker. [Final Year Project Report] (Unpublished)

Yek, P.N.Y (2005) Theory of constraints (TOC) practices of a semiconductor company. [Final Year Project Report] (Unpublished)

Yong, L. and Suaidi, M.K and Pgn. Hj. Yusof, A.A.R (2005) Composite triple beat reduction using the golomb ruler. In: The IASTED International Conference on Optical Communication Systems & Network, 19-21 July 2005.

Zuhailah, Taib (2005) Evaluation of rating curves for some gauging stations in Sarawak. [Final Year Project Report] (Unpublished)

Zulfika, Ismail (2005) Vibration analysis on joint. [Final Year Project Report] (Unpublished)

Zulkifli, Ahamad (2005) Compressibility and shear strength behaviour of peat soil in Sarawak. [Final Year Project Report] (Unpublished)