Items where Author is "Shahidul, Islam"

Article

Shahidul, Islam and Ahmad Adzlan, Fadzli Khairi and Hishammudin Afifi, Huspi (2024) NEXUS OF GREEN TECHNOLOGY AND GREEN ENERGY IN CLEAN WATER PRODUCTION AT ZERO CARBON EMISSION: AN EXPERIMENTAL STUDY. Sci-Int.(Lahore), 36 (4). pp. 179-186. ISSN 1013-5316

Shahidul, Islam and Michael, Anggie Boniface and Rubiyah, Baini and Ahmad Adzlan Fadzli, Khairi and Hishammudin Afifi, Huspi (2024) Impact of Process Control Devices on the Performance of Ultrafilter Membrane in Clean Water Production. Journal of Advanced Research in Applied Mechanics, 120 (1). pp. 142-157. ISSN 2289-7895

Shahidul, Islam and Mujtab, I. M. and Shahanur, - (2024) PERFORMANCE ANALYSIS OF GREEN TECHNOLOGY NEXUS FOR CLEAN ENERGY AND FRESH WATER PRODUCTION TOWARDS ZERO EMISSION GOAL. Science International (Lahore), 36 (5). pp. 303-314. ISSN 1013-5316

Shahidul, Islam and Michael, A. B. and Rubiyah, Baini and Shirley, Jonathan Tanjong and Ahmad Adzlan, Fadzli Khairi and Hishammudin Afifi, Huspi (2023) CLEAN WATER PRODUCTION PERFORMANCE MEASUREMENT INDICATORS AND FACTORS : A REVIEW ON ULTRAFILTER MEMBRANE. SCIENCE INTERNATIONAL (LAHORE), 35 (3). pp. 209-218. ISSN 1013-5316

Shahidul, Islam and Michael, A. B. and Rubiyah, Baini and Shirley, Jonathan Tanjong and Ahmad, A. F. and Hishammudin Afifi, Huspi (2023) CLEAN WATER PRODUCTION PERFORMANCE MEASUREMENT INDICATORS AND FACTORS: A REVIEW ON ULTRAFILTER MEMBRANE. SCIENCE INTERNATIONAL (LAHORE), 35 (3). pp. 209-218. ISSN 1013-5316

Shahidul, Islam (2022) GREEN HYDROGEN PRODUCTION FROM PALM BIOMASS : A REVIEW ON POTENTIALS AND CHALLENGES. Science International (Lahore), 34 (4). pp. 371-380. ISSN 1013-5316

Faisal I., Chowdhury and Jahidul, Islam and A. K., Arof and M. U., Khandaker and Hossain M., Zabed and Ibrahim, Khalil and Md. Rezaur, Rahman and Shahidul, Islam and M. Razaul, Karim and Jamal, Uddin (2021) Electrocatalytic and structural properties and computational calculation of PAN-EC-PC-TPAI-I2 gel polymer electrolytes for dye sensitized solar cell application. RSC Advances, 37 (2021). pp. 22937-22950.

Shahidul, Islam and Shahnur, Begum and Baini, R. (2021) RENEWABLE ENERGY POTENTIAL OF SUGARCANE WASTE BIOMASS: A REVIEW. Science International, 33 (3). pp. 231-236. ISSN 1013-5316

Shahidul, Islam (2020) Engineering Education For Achieving Sustainable Development Goals By 2030 : Revealing The Paths For Challenging Climate Change And Covid 19. Science International (Lahore), 32 (4). pp. 403-410. ISSN 1013-5316

Shahidul, Islam (2019) An insight on the greenhouse gas emission from the metals process industries and its effects on climate change. Material Science & Engineering International Journal, 3 (6). pp. 205-208. ISSN 2574-9927

Mohammad Ashaari, Kiprawi and Abdullah, Yassin and Syed Tarmizi, Syed Shazali and Shahidul, Islam and Mohd Azrin, Mohd Said (2018) Assessment of Cutting Profile of AISI 1095 by Using Infrared Radiation Approach. International Journal of Engineering & Technology, 7 (3.18). pp. 79-82. ISSN 2227524X

Shahidul, Islam and Malcolm, M. L. and Eugene, J. J. (2018) Methane production potential of pome: a review on Waste-to-energy [WTE] Model. Journal of Sci.Int.(Lahore), 30 (5). pp. 717-728. ISSN 1013-5316

Shahidul, Islam and Syed Shazali, S.T. and Abdullah, Yassin and Sarip, A.S.H. (2017) A Novel Design Work In Energy Extraction From In-Stream Water By Various Types Of Micro Hydro Turbines. Science International (Lahore), 29 (1). pp. 161-166. ISSN 1013-5316

Mohammad Ashaari, Kiprawi and Abdullah, Yassin and Syed Tarmizi, Syed Shazali and Shahidul, Islam and Mohd Azrin, Mohd Said (2017) Study Of Cutting Edge Temperature And Cutting Force Of End Mill Tool In High Speed Machining. MATEC Web of Conferences, 87. ISSN 2261236X

Mohd Azlan, Ismail and Othman, A.K. and Shahidul, Islam and Zen, H. (2014) End Suction Centrifugal Pump Operating in Turbine Mode for Microhydro Applications. Advances in Mechanical Engineering. ISSN 16878140

Shahidul, Islam and Syed Shazali, Syed Tarmiz (2011) Determinants of manufacturing productivity: Pilot study on labor-intensive industries. International Journal of Productivity and Performance Management, 60 (6). pp. 567-582. ISSN 1741-0401

Shahidul, Islam and Syed Shazali, Syed Tarmiz (2011) Dynamics of manufacturing productivity: lesson learnt from labor intensive industries. Journal of Manufacturing Technology Management, 22 (5). pp. 664-678. ISSN 1741-038X

Shahidul, Islam and Hamdan, S. and Rahman, M.R. and Jusoh, Ismail and Ibrahim, N.F (2010) Dynamic Young's Modulus and Dimensional Stability of Batai Tropical Wood Impregnated with Polyvinyl Alcohol. Journal of Scientific Research 2 (2), 227-236 (2010), 2 (2). pp. 227-236. ISSN 2070-0245