Items where Author is "Khairul Fikri, Tamrin"

Article

Aisya Amelia, Abdul Latip and Kuryati, Kipli and Abang Mohammad Nizam, Abang Kamaruddin and Rohana, Sapawi and Kasumawati, Lias and Muhammad Arif, Jalil and Khairul Fikri, Tamrin and Nurul Mirza Afqah, Tajudin and Ong, Han Yi and Muhammad Hamdi, Mahmood and Suriati Khartini, Jali and Siti Kudnie, Sahari and Dayang Azra, Awang Mat and Lim, Lik Thai (2024) Development of 3D-printed universal adapter in enhancing retinal imaging accessibility. 3D Printing in Medicine, 10 (23). pp. 1-23. ISSN 113.210.106.45

Ana Sakura, Zainal Abidin and Hanif, Mohd Teddy and Mohd Razip, Asaruddin and Mohd Zulhatta, Kifli and Rasli, Muslimen and Marini, Sawawi and Abang Ahmad, Dzulfakhri and Kasyful Azhim, Yussof and Fredy, Muhamad Firdaus and Khairul Fikri, Tamrin (2024) Physicochemical Investigation and Analysis of Nypa Sap (Nypa fruticans Wurmb) using a Novel Collecting Device. Borneo Journal of Resource Science and Technology, 14 (1). pp. 54-68. ISSN 0128-2972

S. A., Kwang Thai and Abdul Rahman, Kram and Khairul Fikri, Tamrin and Rosdisham, Endut and Siti Kudnie, Sahari (2024) HYBRID MODULATION TECHNIQUE TO IMPROVE RECEIVER SENSITIVITY FOR FSO LINK PROPAGATION. Journal of Theoretical and Applied Information Technology, 102 (2). pp. 440-449. ISSN 1992-8645

Abdul Rahman, Kram and Khairul Fikri, Tamrin and Siti Kudnie, Sahari (2024) HYBRID MODULATION TECHNIQUE TO IMPROVE RECEIVER SENSITIVITY FOR FSO LINK PROPAGATION. Journal of Theoretical and Applied Information Technology, 102 (2). pp. 440-449. ISSN 1817-3195

Fan, Heng Liang and Abdullah, Yassin and Khairul Fikri, Tamrin and Sinin, Hamdan and Chao, Wang (2024) Optimized design and mechanical properties of TPMS porous structures based on selective laser sintering. Matéria (Rio de Janeiro), 29 (3). pp. 1-10. ISSN 1517-7076

Yong, Xhin Rong and Mohamad, Jais and Khairul Fikri, Tamrin and Nurul Syuhada, Zaidi (2023) Prediction on Crude Palm Oil Futures (FCPO) Price in Malaysia: An Artificial Intelligence (AI) Approach. International Journal of Academic Research in Accounting, Finance and Management Sciences, 12 (3). pp. 974-983. ISSN 2225-8329

William L. N, Buglie and Khairul Fikri, Tamrin (2023) Characterization of a Sub-Atmospheric Pressure-Inducing Micropump Based on Flow Rate and Gauge Pressure Measurements. Chemical Engineering & Technology, 46. pp. 1-8. ISSN 1521-4125

William L., N. Buglie and Khairul Fikri, Tamrin and Nadeem Ahmed, Sheikh and Mohd Fairus, Mohd Yasin and Shahrol, Mohamaddan (2022) Enhanced Fluid Mixing Using a Reversed Multistage Tesla Micromixer. Chemical Engineering Technology, 45 (7). pp. 1255-1263. ISSN 1521-4125

Farhana, Yasmin and Khairul Fikri, Tamrin and Nadeem Ahmed, Sheikh and Pierre, Barroy and Abdullah, Yassin and Amir Azam, Khan and Shahrol, Mohamaddan (2021) Laser-Assisted High Speed Machining of 316 Stainless Steel: The Effect of Water-Soluble Sago Starch Based Cutting Fluid on Surface Roughness and Tool Wear. Materials, 14 (5). pp. 1-23. ISSN 1996-1944

Farhana, Yasmin and Khairul Fikri, Tamrin and Sheikh, N. A. (2021) Laser-assisted high speed machining of aluminium alloy: The effect of ultrasonic induced droplet vegetable-based cutting fluid on surface roughness and tool wear. Lasers in Engineering, 48 (4-6). 195 -225. ISSN 08981507

Khairul Fikri, Tamrin and Nurul Amirah, Khalid and Andrew Ragai, Henry Rigit (2020) Fabrication of Flexible Microfluidic Strain Sensor by Laser Micromachining for Hand Motion Tracking. International Journal of Materials, Mechanics and Manufacturing, 8 (3). pp. 138-142. ISSN 1793-8198

Khairul Fikri, Tamrin and Muhammad Thalhah, Zainal and Mohd Fairus, Mohd Yasin and Wan Fahmin Faiz, Wan Ali and Mohd Hanafi, Ani (2020) Carbon precursor analysis for catalytic growth of carbon nanotube in flame synthesis based on semi-empirical approach. Carbon Letters, 31 (1). pp. 1-10. ISSN 2233-4998

Khairul Fikri, Tamrin and Moghadasi, K. and Sheikh, N. A. (2020) Experimental and numerical investigation on multi-pass laser cutting of natural fiber composite. The International Journal of Advanced Manufacturing Technology, 107. pp. 1483-1504. ISSN 1433-3015

Muhammad ‘Abid Ira, Irawan and Mohd Fairus, Mohd Yasin and Khairul Fikri, Tamrin (2020) Modelling of Water-Assisted Flame Synthesis of Carbon Nanotube using Counterflow Diffusion. Journal of Advanced Research in Materials Science, 66 (1). pp. 1-7. ISSN 2289-7992

Khairul Fikri, Tamrin and Mohammad Bodrul, Munir and Hawa, Ringkai (2019) Towards Three-Dimensional Experimental Investigation on Fish Sperm Mobility in Oily Water By Digital Holographic Microscopy for Environmental Protection. Biodiversity and Environmental Conservation, 15 (2). p. 21. ISSN 1675-5820

Kinidi, Lennevey and Shanti Faridah, Salleh and Noraziah, Abdul Wahab and Khairul Fikri, Tamrin and Hipolito, Cirilo Nolasco and Ivy Tan, Ai Wei (2019) Corrigendum to “Recent Development in Ammonia Stripping Process for Industrial Wastewater Treatment”. INTERNATIONAL JOURNAL OF CHEMICAL ENGINEERING. p. 1. ISSN 1687-806X

Khairul Fikri, Tamrin and Moghadasi, K. (2019) Experimental Investigation and Parameter Optimization of Low Power CO2 Laser Cutting of a Carbon/Kevlar Fibre-reinforced Hybrid Composite. Lasers in Engineering. pp. 1-24. ISSN 0898-1507

Abdul Rahman, Kram and Rashidi, C. B. M. and Aljunid, S. A. and Khairul Fikri, Tamrin and Rudiyanto, P. Jong and Dyg Norkhairunnisa, Abang Zaidel (2019) Spectral coding performance under free space optical medium. Indonesian Journal of Electrical Engineering and Computer Science, 14 (1). pp. 290-294. ISSN 2502-4752

Proceeding

Ashley Edward Roy, Soosay and Muhammad Hamdi, Mahmood and Khairul Fikri, Tamrin and Narayanan, Kulathuramaiyer (2023) TRIZ-Based Approach in Remodeling Invasive Glucometer. In: International TRIZ Future Conference, September 12–14, 2023, Offenburg, Germany.

Muhammad Naim, Leman and Shahrol, Mohamaddan and Ana Sakura, Zainal Abidin and Mohamad Syazwan Zafwan, Mohamad Suffian and Khairul Fikri, Tamrin and Rubiyah, Baini and Akihiko, Hanafusa (2021) Development of Batch Type Convection Dryer for Fish Cracker Manufacturing. In: The International Conference on Intelligent Manufacturing and Energy Sustainability (ICIMES-2021), June 18– 19, 2021, Hyderabad.