Items where Author is "Ibrahim, M.D"

Kashiwabara, Y. and Ibrahim, M.D and Roslan, L. and Watanabe, H. and Sunami, Y. (2021) EFFECTS OF INJECTION SPEED ON MECHANICAL PROPERTIES IN HIGH-PRESSURE DIE CASTING OF MG-RE ALLOY. MM Science Journal, 1 (2021). pp. 4906-4912. ISSN 1803-1269

Roslan, L. and Ibrahim, M.D (2018) Flow Simulation and Experiment for Preventing Defects in Die Casting. In: Japan Die Casting Congress, 8-10 Nov 2018, Japan.

Ibrahim, M.D and Amran, S.N.A. and Yunos, Y.S and Rahman, M.R.A. and Mohtar, M. Z. and Wong, L.K. and Zulkharnain, A. (2018) The Study of Drag Reduction on Ships Inspired by Simplified Shark Skin Imitation. Applied Bionics and Biomechanics, 2018. pp. 1-11. ISSN 1176-2322

Ibrahim, M.D and Wong, L.K and Anyi, M. and Yunos, Y.S and Rahman, M.R. and Mohta, M.Z (2017) Design of a novel and efficient lantern wind turbine. Journal of Physics: Conference Series, 822 (1). ISSN ‎1742-6588 (print)

Ibrahim, M.D and Rahman, M.R. and Khan, A.A and Mohamad, M.R and Suffian, M.S.Z.M. and Yunos, Y.S and Wong, L.K and Mohtar, M.Z (2017) Effect of mold designs on molten metal behaviour in high-pressure die casting. Journal of Physics: Conference Series, 822 (1). ISSN ‎1742-6588 (print)

Othman, A.K. and Zen, H. and Ibrahim, M.D (2013) Energy Optimization for Rural ICT Telecentre. In: International Festival of Science, Technology, Engineering and Mathematics, Asia Pacific Regional Conference on Solar and Hybrid Technologies, 30 Sep - 1 Oct 2013, UNIMAS.

A. Rahman, N. and Narawi, A.F. and Atan, M. F. and Othman, A.K. and Zen, H. and M.Basri, H. and Abdullah, A.S. and Ibrahim, M.D (2013) Feasibility Study Of Sustainable Pellet-Power Generation For Sarawak Isolated Areas. In: International Festival of Science, Technology, Engineering and Mathematics, Asia Pacific Regional Conference on Solar and Hybrid Technologies, 30 Sep - 1 Oct 2013, UNIMAS.

Othman, A.K. and Zen, H. and A. Rahman, N. and Ibrahim, M.D and M. Basri, Hazrul and Lias, K. (2013) Renewable Energy Roadmap And Employability In Energy Sector For Sarawak Corridor Of Renewable Energy (SCORE). In: International Festival of Science, Technology, Engineering and Mathematics, Asia Pacific Regional Conference on Solar and Hybrid Technologies,, 30 Sep - 1 Oct 2013, UNIMAS.

A.Rahman, N. and Ruduan, A.H. and Atan, M. F. and Othman, A.K. and Zen, H. and M.Basri, H. and Abdullah, A.S. and Ibrahim, M.D (2013) Sustainable Pelletization Of MetroxylonSagu Plantation. In: International Festival of Science, Technology, Engineering and Mathematics, Asia Pacific Regional Conference on Solar and Hybrid Technologies, 30 Sep - 1 Oct 2013, UNIMAS.

Ibrahim, M.D and Chew, C.K. and Othman, A.K. and Zen, H. (2013) U-shaped and Conventional HDD Designs Numerical Characteristics. In: International Festival of Science, Technology, Engineering and Mathematics, Asia Pacific Regional Conference on Solar and Hybrid Technologies, 30 Sep - 1 Oct 2013, UNIMAS.

Zulkharnain, A. and Ashari, Muhd Fadzli and Ibrahim, M.D (2012) Microplate Design for Reaction Systems Involving Immobilized Enzyme/Bacteria. In: 1st International Conference on Design and Innovation 2012, Sustainable Ground, ICDI 2012, 7-8 Nov 2012, UNIMAS.

Ibrahim, M.D and Junaidi, E. and Osman, M.S and Khan, A.A (2012) Improvements of the Aerodynamic and Thermal Characteristics of an S-Shaped Windowed HDD Arms. In: 2012 ASME-ISPS /JSME-IIP Joint International Conference on Micromechatronics for Information and Precision Equipment MIPE2012, June 18-20, 2012.

Namba, T. and Ibrahim, M.D and Hashimoto, Hiromu (2010) Optimum Design of Groove Geometry for Thrust Bearing with Weight Factor Consideration. In: Japanese Society of Tribologists, Tribology Conference 2010, 17-19 May 2010, Tokyo, Japan.

Ibrahim, M.D and Namba, T. and Ochiai, M. and Hashimoto, H. (2010) Optimum design of thrust air bearing for hard disk drive spindle motor. Journal of Advanced Mechanical Design, Systems, and Manufacturing, 4 (1). pp. 70-81. ISSN 1881-3054

Itoh, K. and Sunami, Y. and Ibrahim, M.D and Namba, T. and Hashimoto, H. (2009) Optimum Design of Fluid Film Bearings Used in Small Size Spindle Motor. In: Mechanical Engineering Congress 2009, Japan Precision Equipments and Functions Divisions, (MECJ-09), 13-16 Sept 2009, Iwate University, Japan.

Namba, T. and Ibrahim, M.D and Ochiai, M. and Hashimoto, H. (2009) Measurement of Film Thickness of Thrust Air Bearing to Consider an Alteration of Temperature. In: Proc. of the 4th World Tribology Congress (WTC IV), 6-11 Sep 2009, Kyoto, Japan.

Ibrahim, M.D and Namba, T. and Ochiai, M. and Hashimoto, H. (2009) Optimization of Small Size Thrust Air Bearing with the Consideration of Groove Dimensions and Geometry Variables. In: Proc. of the 4th World Tribology Congress (WTC IV), 6-11 Sep 2009, Kyoto, Japan.

Ibrahim, M.D and Namba, T. and Ochiai, M. and Hashimoto, H. (2009) Application of SQP Method in Designing Thrust Air Bearing for Hard Disk Drive Spindle Motor. In: Proc. of the JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment (MIPE 2009), 17-20 June 2009, Tsukuba International Congress Center, Ibaraki, Japan.

Namba, T. and Ibrahim, M.D and Ochiai, M. and Hashimoto, H. (2009) Measurement of Film Thickness for Air Thrust Air Bearing with Temperature Consideration on Bearing Surface. In: Proc. of the Japanese Society of Tribologists, Tribology Conference Tokyo, 18-20 May 2009, Tokyo, Japan.

Ibrahim, M.D and Namba, T. and Ochiai, M. and Hashimoto, H. (2009) Optimization of HDD Thrust Air Bearing for Spindle Motor. In: Proc. of the Japanese Society of Tribologists, Tribology Conference Tokyo, 18-20 May 2009, Tokyo, Japan.

Ibrahim, M.D and Namba, T. and Ochiai, M. and Hashimoto, H. (2008) Characteristics Analysis and Optimum Design of Small Size Thrust Air Bearing for HDD - Parametric Study. In: Proc. of the Mechanical Engineering Congress, 2008 Japan (MECJ-08), 3-7 Aug 2008, Yokohama National University, Japan.

Namba, T. and Ibrahim, M.D and Ochiai, M. and Hashimoto, H. (2008) Characteristics Analysis and Optimum Design of Small Size Thrust Air Bearing for HDD-Application to Optimum Design. In: Proc. of the Mechanical Engineering Congress, 2008 Japan (MECJ-08), 3-7 Aug 2008, Yokohama National University, Japan.