Items where Author is "Abdullah, Yassin"

Zipei, Cao and Annisa, Binti Jamali and Abdullah, Yassin (2024) Efficient Control Strategy of Photovoltaic Grid-Connected Microinverters with Improved Topology. PhD thesis, Universiti Malaysia Sarawak.

Zipei, Cao and Annisa, Jamali and Abdullah, Yassin and Ya, Huang (2024) The Quasi-Resonant Structure and Control Strategy of a Photovoltaic Flyback Grid-Connected Microinverter. Electronics, 13 (10). pp. 1-18. ISSN 2079-9292

Fan, Heng Liang and Abdullah, Yassin and Khairul Fikri, Tamrin and Sinin, Hamdan and Chao, Wang (2024) Optimized design and mechanical properties of TPMS porous structures based on selective laser sintering. Matéria (Rio de Janeiro), 29 (3). pp. 1-10. ISSN 1517-7076

Rudiyanto, Philman Jong and Muhamad Irfan, Ahmad Shayuri and Abdullah, Yassin and Abang Mohammad Nizam, Abang Kamaruddin (2023) Thermal Performance Evaluation of a Small-Scale Drying Machine for Palm Oil Mill Sludge. International Journal of Integrated Engineering, 15 (5). pp. 6-12. ISSN 2229-838X

Ahmad Adzlan Fadzli, Khairi and Abdullah, Yassin and Abang Mohammad Nizam, Abang Kamaruddin and Mohamed Sukri, Mat Ali (2023) Numerical Simulation of Drying Process within a Novel Rotary Drying Machine for Palm Oil Sludge. Journal of Advanced Research in Applied Mechanics, 103 (1). pp. 33-42. ISSN 2829-7895

Mohamad Raduan, Kabit and Jeffery Lee Siong, TING and Abdullah, Yassin (2022) TOWARDS CAMPUS SUSTAINABILITY : ESTIMATING ON-CAMPUS VEHICLE CO2 EMISSIONS IN UNIMAS. Journal of Sustainability Science and Management, 17 (6). pp. 193-206. ISSN 2672-7226

Farhana, Yasmin and Khairul Fikri, Tamrin and Nadeem Ahmed, Sheikh and Pierre, Barroy and Abdullah, Yassin and Amir Azam, Khan and Shahrol, Mohamaddan (2021) Laser-Assisted High Speed Machining of 316 Stainless Steel: The Effect of Water-Soluble Sago Starch Based Cutting Fluid on Surface Roughness and Tool Wear. Materials, 14 (5). pp. 1-23. ISSN 1996-1944

Nazeri, Abdul Rahman and Allene Albania, Linus and Elisa Elizabeth, Jihed and Umang Jata, Gilan and Nurhidayah Kumar, Muhd Firdaus Kumar and Adarsh, Philip and Abdullah, Yassin and Arif, Parabi (2021) Experimental study of batch electrocoagulation treatment of peat water in Sarawak with aluminium electrodes. INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 13 (2). pp. 168-176. ISSN 2229-838X

Nazeri, Abdul Rahman and Allene Albania, Linus and Adarsh, Philip and Elisa Elizabeth, Jihed and Nurhidayah Kumar, Muhammad Firdaus Kumar and Abdullah, Yassin (2021) Development of solar power system for Sarawak peat water continuous electrocoagulation treatment process. IOP Conf. Series: Materials Science and Engineering (012039). pp. 1-9.

Mohd Azrin, Mohd Said and Ahmad Faridzul, Japar and Nor Kamaliana, Khamis and Abdullah, Yassin and Ana Sakura, Zainal Abidin and Rudiyanto, Philman Jong and Mohamad Syazwan Zafwan, Suffian and Aishah, Arsad (2020) DESIGN AND DEVELOP LOW-COST DEVICE FOR MONITORING OCCUPATIONAL NOISE EXPOSURE TOWARD WORKERS IN FACTORY. Science International (Lahore), 32 (6). pp. 729-733. ISSN 1013-5316

Mohd Azrin, Mohd Said and Shawn Felix, Stephen and Nor Kamaliana, Khamis and Abdullah, Yassin and Ana Sakura, Zainal Abidin and Rudiyanto, Philman Jong and Mohamad Syazwan Zafwan, Suffian and Aishah, Arsad (2020) Design and Develop Low-Cost Device on Monitoring Environmental Indoor Air Quality in Factory. Journal of Engineering and Science Research, 4 (4). pp. 6-11. ISSN 2289-7127

Nazeri, Abdul Rahman and Allene Albania, Linus and Umang Jata, Gilan and Nurhidayah Kumar, Muhammad Firdaus Kumar and Abdullah, Yassin and Adarsh, Philip (2020) Experimental study of batch electrocoagulation treatment of peat water in Sarawak with aluminium electrodes. IOP Conference Series: Materials Science and Engineering. 778 (012126). pp. 1-8.

Abdullah, Yassin and Abang Mohammad Nizam, Abang Kamaruddin and Syed Tarmizi, Syed Shazali and M. Shahidul, Islam and Mohd Azrin, Mohd Said and Mohd A., Kiprawi (2019) Development of a cutting edge temperature measurement of end mill tool by using infrared radiation technique. Journal of Mechanical Engineering and Sciences, 3 (1). pp. 4661-4678. ISSN 2231-8380

Ngie, David Chua Sing and Shahrol, Mohamaddan and Shirley, Jonathan Tanjong and Abdullah, Yassin and Lim, Soh Fong (2018) Detection of Bond Pad Discolorations at Outgoing Wafer Inspections. IEEE Transactions on Semiconductor Manufacturing, 31 (1). pp. 144-148. ISSN 0894-6507

Mohammad Ashaari, Kiprawi and Abdullah, Yassin and Syed Tarmizi, Syed Shazali and Shahidul, Islam and Mohd Azrin, Mohd Said (2018) Assessment of Cutting Profile of AISI 1095 by Using Infrared Radiation Approach. International Journal of Engineering & Technology, 7 (3.18). pp. 79-82. ISSN 2227524X

Shahidul, Islam and Syed Shazali, S.T. and Abdullah, Yassin and Sarip, A.S.H. (2017) A Novel Design Work In Energy Extraction From In-Stream Water By Various Types Of Micro Hydro Turbines. Science International (Lahore), 29 (1). pp. 161-166. ISSN 1013-5316

Mohammad Ashaari, Kiprawi and Abdullah, Yassin and Syed Tarmizi, Syed Shazali and Shahidul, Islam and Mohd Azrin, Mohd Said (2017) Study Of Cutting Edge Temperature And Cutting Force Of End Mill Tool In High Speed Machining. MATEC Web of Conferences, 87. ISSN 2261236X

Wan Farhana, Mohamad and Amirazam, Khan and Faiz, Ahmad and Abdullah, Yassin (2016) Physical and Mechanical Properties of Ni-Cr based composites with addition of solid lubricants produced through powder metallurgy process. MATEC Web of Conferences, 87. ISSN 2261-236X

Shahidul, M. I. and Syed Tarmizi, S.S and Abdullah, Yassin and Al Khalid, Othman and Hushairi, Zen and Ting, Ching Hung and Lee, Man Djun (2015) Modeling the Energy Extraction from In-stream Water by Multi Stage Blade System of Cross Flow Micro Hydro Turbine. Procedia Engineering, 105. pp. 488-494.

Ahmad Shahir, Jamaluddin and Abdullah, Yassin (2013) Analysis of Laser Sintered Materials Using Finite Element Method. Sains Malaysiana, 42 (12). pp. 1727-1733. ISSN 0126-6039

Ahmad Adzlan, Fadzli Khairi and M. I., Shahidul and Syed Tarmizi, Syed Shazali and Abdullah, Yassin and Mohd. Azrin, Mohd Said and Hishammudin, Afifi Huspi and C. H., Ting (2013) Investigation on Water Consumption Pattern in Traditional Malaysian Kampung: An Insight Study on Water and Environmental Issues. ENCON 2013.