- Home
- About
- Articles on COVID-19
- Browse
- UNIMAS Niche Areas
- Corporate Memory
- Statistics
- How to Upload Article
 | Up a level |
Abang Mohamad Harith, Abang Beniamin and Noor Hisyam, Noor Mohamed and Mahsuri, Yusof (2023) The Effect of Graphene Nanoplatelets Content on the Hardness of Mg6%Zn0.2%Mn Composites. Pertanika Journal of Science & Technology, 31 (3). pp. 1493-1502. ISSN 0128-7680
Adibah, Binti Ismail. (1999) Persijilan MS ISO 9002 dan persepsi kakitangan terhadap amalan pengurusan kualiti : satu kajian kes di Bintulu Port Sdn. Bhd. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).
Ahmad B. H., Kueh and Chun Yean, Tan and Mohd Yazid, Yahya and Mat Uzir, Wahit (2022) Impact resistance efficiency of bio-inspired sandwich beam with different arched core materials. Steel and Composite Structures, 44 (1). pp. 105-117. ISSN 1229-9367 1598-6233
Ahmed, Waseem and Tazuddin, Adrus Mohamad and Wong, Ming Ming and Liaw, Tzy Renn and Myers, Douglas (2007) Partitioning for a Concept-Based SoC Design to Address Product Evolution. In: International Conference on intelligent and Advanced System. (Unpublished)
Ana Sakura, Zainal Abidin (2015) Development of Track Wheel for In-pipe Robot Application. Procedia Computer Science, 76. pp. 500-505. ISSN 1877-0509
Ana Sakura, Zainal Abidin (2015) Development of cleaning device for In-pipe Robot Application. Procedia Computer Science, 76. pp. 506-511. ISSN 1877-0509
Ana Sakura, Zainal Abidin and Mohamad Zulhatta, Kifli and Annisa, Jamali and Rasli, Muslimen and Raudhah, Ahmadi (2020) Development of Black Pepper Rotary Drum Dryer System. International Journal o f Integrated Engineering, 12 (7). pp. 11-19. ISSN 2600-7916
Anagha Lami, Ramesh Kumar (2022) Assessing the Comparative Advantage of Malaysia in the Agri- Food Industry. [Final Year Project Report] (Unpublished)
Andrew Munot, Magdalene and Ibrahim, R.N. (2013) Remanufacturing Process And Its Challenges. Journal of Mechanical Engineering and Sciences (JMES), 4. pp. 488-495. ISSN 2231-8380
Anielson, bin Mamin (2014) Effect of biodiesel's saturation on emissions of carbon monoxide (CO) and nitrogen oxide (NOx). [Final Year Project Report] (Unpublished)
Ardiles, ak. Gabrial (2007) Research on promotional campaign of F&N fruit juice. [Final Year Project Report] (Unpublished)
Asrul Sani, bin Anuar. (2006) Kajian keberkesanan fungsi mekanikal katil pesakit Hospital Kerajaan. [Final Year Project Report] (Unpublished)
Augustine Paka, T. (2006) Supply chain management (SCM) practice. [Final Year Project Report] (Unpublished)
Azila, Adnan (2009) Application of natural rubber serum as substrate for lactate fermentation. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).
Bakri, M.K.B. and Jayamani, E. and Heng, S.K. and Sinin, Hamdan (2015) Reinforced Oil Palm Fiber Epoxy Composites: An Investigation on Chemical Treatment of Fibers on Acoustical, Morphological, Mechanical and Spectral Properties. Materials Today: Proceedings, 2 (4-5). pp. 2747-2756. ISSN 2214-7853
Barbara, Dieo (2012) Pengusung untuk kegunaan mengangkat mangsa kecederaan. [Final Year Project Report] (Unpublished)
Berita, Harian (2012) PUSAKA, penyelidik bangunkan industri perabot, 04 Februari 2012. [Newspaper Cutting] (In Press)
Chai, Shin Wang (2013) Electronic manufacturing industry in Asia. Masters thesis, Universiti Malaysia Sarawak, (UNIMAS).
Chan, Angelina Wan Sian (2011) The influence of country-of-origin cue on Malaysians' product attitude and purchase intention of a low involvement product. Masters thesis, Universiti Malaysia Sarawak, (UNIMAS).
Chaudhry, F. and Asif, N. and Shafqat, S.S. and Khan, A.A. and Munawar, M.A. and Khan, M.A. (2016) Efficient ecofriendly synthesis of pyrazole acryloyl analogs by amino acid catalysis. Synthetic Communications, 46 (8). pp. 701-709. ISSN 00397911
Chong, Kok Hing and Law, P.L and Rubiyah, Baini and Shanti Faridah, Saleh and Andrew Ragai Henry, Rigit (2014) Performance Evaluation of a Horizontal Air Staged Inclined Biomass-to-Heat Energy Converter for Drying Paper Egg Trays. International Journal of Renewable Energy Research, 4 (1). ISSN 309-0127
Dayang Salyani, Abang Mahmod and Glandut, Nicolas and Amir Azam, Khan and Labbe, Jean Claude (2015) Surface oxidation of porous ZrB2-SiC ceramic composites by continuous-wave ytterbium fibre laser. Applied Surface Science, 357. pp. 1982-1990. ISSN 0169-4332
Dominic Raphael, anak Main (2004) A study on the implementation of just-in-time (jit) manufacturing in Sarawak manufacturing industries. [Final Year Project Report] (Unpublished)
Elammaran, Jayamani and Sinin, Hamdan and Nurizahusna, binti Suid (2013) Experimental determination of Sound Absorption Coefficients of Four types of Malaysian Wood. Applied Mechanics and Materials, 315. pp. 577-581. ISSN 1662-7482
Elammaran, Jayamani and Sinin, Hamdan and Soon, Kok Heng and Md Rezaur, Rahman and Muhammad Khusairy, Bin Bakri (2016) Acoustical, thermal, and morphological properties of zein reinforced oil palm empty fruit bunch fiber bio-composites. Journal of Applied Polymer Science, 133 (43). ISSN 0021-8995
Elaswad, Houssein M. A (2017) Modelling the Contribution of Engineering Management towards Production Output and Its Output Growth for Small Medium Enterprise (SMEs) Machinery Manufacturing. PhD thesis, UNIMAS.
Emmy, Binti Polly (2009) Faktor-faktor yang mempengaruhi pengusaha kek lapis Sarawak di Kuching menginovasikan pengeluaran. [Final Year Project Report] (Unpublished)
Fabian Halley Pata, Alban Dattu (2019) Investigation of Finite Element Model of Futsal Ball and Simulation of its Impact Characteristics. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).
Fadilah, Siali and Kii, Winnie Lin Lin and Mahani Muhammad, Abdu Shakur and Norazirah, Ayob (2016) Young Adult Sarawakian Purchase Intention On Junk Food Based On Packaging Design Elements. Journal of Borneo Kalimantan, 2 (2). ISSN 2289-2583
Farhana, Yasmin (2021) Effects of Environmental-Friendly Cutting Fluids on Surface Roughness and Tool Wear in Laser-Assisted High Speed Milling of Aluminium Alloy and 316 Stainless Steel. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).
Faridah, Sahari and Musdi, Shanat (2019) Cultural Concept in Furniture Design : Perceptions, Issues and Challenges. In: Sarawak Design Conference 2019, 27-28 June 2019, BCCK, Kuching.
Farrah, Wong and Mohd Syaqir, Japarudin and Sariah, Abang and Yew, Hoe Tung and Mazlina, Mamat and Chew, Ing Ming and Aroland, Kiring and Jamal, Ahmad Dargham (2024) Enhancing Bamboo Dryer Using IOT Control. In: Intelligent Informatics : Proceedings of Eighth International Symposium on Intelligent Informatics (ISI 2023). Smart Innovation, Systems and Technologies, 389 . Springer Nature Link, pp. 317-328. ISBN ISBN 978-981-97-2146-7 / ISBN 978-981-97-2147-4 (eBook)
Fawizah, Ramli (2006) Kajian reka bentuk pembungkusan produk tempe. [Final Year Project Report] (Unpublished)
Fui, Kiew Liew and Sinin, Hamdan and Md Rezaur, Rahman and Mohamad Rusop, Mahmood and Md. Mizanur, Rahman and Chang, Josephine Hui Lai and Md. Tipu, Sultan (2016) 4-Methylcatechol-treated Jute-Bamboo Hybrid Composites: Effects of pH on Thermo-Mechanical and Morphological Properties. BioResources, 11 (3). pp. 6880-6895. ISSN 1930-2126
Gee, Genevieve V. A. and Das, Indraneil (2021) Creative innovations and advanced printing technologies in contemporary postage stamps from Malaysia. Addenda to December 2021. Journal of the Philatelic Society of Kuching, Sarawak, 13 (2). pp. 49-76.
Hairuddin, Ab. Hamid (2012) Inovasi penggunaan bahan alternatif dalam reka bentuk permainan jong. [Final Year Project Report] (Unpublished)
Hoo Tien, Nicholas Kuan and Meng, Chuen Lee (2014) Tensile Properties of Pandanus Atrocarpus based Composites. Journal of Applied Science & Process Engineering, 1 (1). ISSN 2289-7771
Hu, Wei Kiet (2008) Time and cost study on cold-formed steel and reinforced concrete construction - a comparison. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).
Huo, Yarui and Faridah, Sahari (2022) Analysis on the Common Quality Problems and Production Methods of Jeans Belt Loop Knot. Scientific and Social Research, 4 (11). pp. 28-35. ISSN 2661-4332
Huo, Yarui and Faridah, Sahari (2023) The Influence of Employee Emotional Behavior and System Factors on the Organizational Efficiency of Trouser Automatic Hanging System. Medicine, 102 (30). pp. 81-82. ISSN 1536-5964
Huo, Yarui and Faridah, Sahari (2023) Research on the Balance Efficiency of the Intelligent Hanging System for Jeans Production Line. In: Proceedings of the 2023 3rd International Conference on Public Management and Intelligent Society (PMIS 2023), 26 July 2023.
Hushairi, Zen and Adnan, Mahmood (2016) ICT Convergence in Internet of Things – The Birth of Smart Factories. International Journal of Computer Science and Information Security, 14 (4). pp. 93-101. ISSN 1947-5500
Ibrahim, M.D and Amran, S.N.A. and Yunos, Y.S and Rahman, M.R.A. and Mohtar, M. Z. and Wong, L.K. and Zulkharnain, A. (2018) The Study of Drag Reduction on Ships Inspired by Simplified Shark Skin Imitation. Applied Bionics and Biomechanics, 2018. pp. 1-11. ISSN 1176-2322
Ibrahim, M.D and Rahman, M.R. and Khan, A.A and Mohamad, M.R and Suffian, M.S.Z.M. and Yunos, Y.S and Wong, L.K and Mohtar, M.Z (2017) Effect of mold designs on molten metal behaviour in high-pressure die casting. Journal of Physics: Conference Series, 822 (1). ISSN 1742-6588 (print)
Imran, Abdullah (2012) Pengurusan harta intelek dalam proses rekabentuk perindustrian : satu kajian perbandingan organisasi berinovasi di Malaysia. PhD thesis, Universiti Malaysia Sarawak.
Indraneil, Das and Gee, Genevieve V. A. (2021) Creative innovations and advanced printing technologies in contemporary postage stamps from Malaysia Addenda to December 2021. Journal of the Philatelic Society of Kuching, Sarawak, 13 (2). pp. 49-76.
Ismail, Abd Latif and Abu Hassan, Md. Isa and Zuliana, Zainal Abidin and Golnaz, Rezai and Juwaidah, Sharifuddin and Zainalabidin, Mohamed (2015) The Assessment of Comparative Advantage of the Non-Ruminant Subsector through Policy Analysis Matrix(PAM) in Peninsular Malaysia. Pertanika Journal of Social Sciences & Humanities, 23. pp. 63-76. ISSN 0128-7702
JASMINE ANAK, JENDIA (2023) Parametric Study for Runner Modification of Die Casted Part with Venting Systems. Masters thesis, Faculty of Engineering, UNIMAS.
Jayamani, E. and Sinin, Hamdan and Rahman, M.R. and Bakri, M.K.B. (2015) Dielectric Properties of Lignocellulosic Fibers Reinforced Polymer Composites: Effect of Fiber Loading and Alkaline Treatment. Materials Today: Proceedings, 2 (4-5). pp. 2757-2766. ISSN 2214-7853
Jayamani, Elammaran and Soon, Kokheng and Bin Bakri, Muhammad Khusairy and Sinin, Hamdan (2017) Comparative study of sound absorption coefficients of coir/kenaf/sugarcane bagasse fiber reinforced epoxy composites. Key Engineering Materials, 730 (1). pp. 48-53. ISSN 1013-9826
Johnny Damian, Tawi (2009) Industrial design and manufacturing of a manual driven low cost banana / tapioca / yam slicing machine. [Final Year Project Report] (Unpublished)
Josep, Francis (2011) Intra industry trade between United States and China in manufacturing sector. [Final Year Project Report] (Unpublished)
Karunakaran, P. and Osman, M.S (2012) Optimization of a flexible manufacturing system (FMS) for high technology product producing factory via the modularization of production systems. International Journal of Mechanical Engineering and Robotics Research, 1 (1). pp. 1-13. ISSN 2278-0149
Khairul Amin, Othman (2005) Modelling and fabricating subsonic wing. [Final Year Project Report] (Unpublished)
Kopli, Bujang (2010) Production and Processing Of Sago : A Food And Fuel Alternative. In: International Seminar on Sago & Spices for Food Security. Ambon. Rep. Indonesia. 28-29 July, 2010..
Lai, Josephine Chang Hui and Khairul Hafiz, Masrun and Nooralinah, Madinah and Rubiyah, Baini and Nur Amalina Shairah, Abdul Samat (2021) PRODUCTION AND PERFORMANCE OF OKARA/SAGO AND OKARA/BANANA PEEL ORGANIC FERTILIZERS IN PLANTATION. Journal of Engineering Science and Technology, 20. pp. 1-15. ISSN 1823-4690
Lee, Ching Ching (2002) Production planning practices in Malaysian manufacturing industries. [Final Year Project Report] (Unpublished)
Lee, Man Djun (2017) Capacity Utilization of Small Scale Desalination Plant. PhD thesis, UNIMAS.
Lee, Wen Chiat (2011) Board structures, ownership structure and firm value in Malaysian public listed manufacturing companies. Masters thesis, Universiti Malaysia Sarawak, (UNIMAS).
Lendy, Ho Sheau Chia (2010) Penggunaan imejan pada label produk pembungkusan biskut buatan Malaysia. [Final Year Project Report] (Unpublished)
Lim, Anthony Wee Liang. (2008) Effect of various conditions on adhesively bonded glass fiber reinforced plastic (GFRP). [Final Year Project Report] (Unpublished)
Lim, Nyuk Thin (2004) Deria rasa. [Final Year Project Report] (Unpublished)
M. Shahidul, Islam (2022) RENEWABLE ENERGY PRODUCTION FROM PALM BIOMASS BY PYROLYSIS: A PATH TO ACHIEVE ECONOMIC AND ENVIRONMENTAL SUSTAINABILITY. SCIENCE INTERNATIONAL-LAHORE, 34 (3). pp. 199-204. ISSN 1013-5316
M. Shahidul, Islam and Syed Tarmizi, Syed Shazali and Sarip, A.S.H. (2017) ENERGY EXTRACTION EFFICIENCY OF IN-STREAM MULTISTAGE MICRO-HYDRO TURBINE. Sci. Int. (Lahore), 29 (5). pp. 1129-1134. ISSN 1013-5316
Magdalene, Andrew Munot and Abdullah, Hj. Yassin and Syed Tarmizi, Syed Shazali and Marini, Sawawi and Shirley, Jonathan Tanjong and Nur Tahirah, Razali (2018) Analysis of production planning activities in remanufacturing system. Journal of Mechanical Engineering and Sciences, 12 (2). pp. 3548-3565. ISSN 2231-8380
Magdalene, Andrew-Munot (2015) An Insight into Used-Products Remanufacturing. Journal of Advanced Review on Scientific Research, 8 (1). pp. 9-18. ISSN 2289-7887
Magdalene, Andrew-Munot and John, Inyang and Shirley, Jonathan Tanjong and Syed Tarmizi, Syed Shazali and Ervina, Junaidi (2023) Effects of multiple variable factors on crude palm oil processing time: A simulation-based approach. Journal of Engineering Science and Technology (JESTEC), 18 (4). pp. 1805-1830. ISSN 1823-4690
Mahsuri, Yusof and Nur Tahirah, Razali and Marini, Sawawi and Kuan, Nicholas Hoo Tien and Dexter Sigan, John (2020) Characterisation of Polymesoda bengalensis Shell Powder. Journal of Applied Science & Process Engineering, 7 (1). pp. 500-509. ISSN 2289-7771
Maidal, Saiful Islam and Nurshamiela, S B M Azmee and Ashaari, Zaidon and Sinin, Hamdan and Abdul, Rasyid and Kh Nurul, Islam (2017) Properties of Wood Polymer Nanocomposites Impregnated With ST-co-EDA/Nanoclay. Macromolecular Symposia, 371 (1). p. 128. ISSN 1022-1360
Mardina Alycia, Marakus (2011) Do Singapore listed manufacturing firms follow pecking order theory? [Final Year Project Report] (Unpublished)
May-Chiun, Lo and Osman, Intan (2008) Power Congruence approaches to downward influence in Malaysia manufacturing industry. International Journal of Business and management, Vol.3 No.11 2008, 3 (11).
Md. Mizanur, Rahman and Md. Rezaur, Rahman and Sinin, Hamdan and Md. Faruk, Hossen and Josephine, Chang Hui Lai and Fui, Kiew Liew (2015) Synthesis of Cotton from Tossa Jute Fiber and Comparison with Original Cotton. International Journal of Polymer Science, 2015. ISSN 16879422
Ming, Yee Tan and Hoo Tien, Nicholas Kuan and Meng, Chuen Lee (2017) Characterisation of alkaline treatment and fiber content on the physical, thermal and mechanical properties of ground coffee waste/oxo-biodegradable HDPE Biocomposites. International Journal of Polymer Science, 2017. ISSN 16879422
Mohamad Iskandar, Jobli (2004) Experimental analysis on shear behaviour of a plain weave of a woven fabric. [Final Year Project Report] (Unpublished)
Mohamad Syamim, Hamsawi and Ana Sakura, Zainal Abidin and Shahrol, Mohamaddan and Rasli, Muslimen and Mohd Syahmi, Jamaludin and Nurul Izzati, Hashim and Nazreen, Junaidi (2016) A Review on Development of Kek Lapis Sarawak's Machine. MATEC Web of Conferences, 87. ISSN 2261236X
Mohamaddan, Shahrol and Mohd Mohtar, A. M A A and Junaidi, Nazreen and Mohtadzar, Nur Alia Athirah Binti Hj and Mohamad Suffian, Mohamad Syazwan Zafwan (2016) Development of Keropok Keping Drying Machine for Small & Medium Enterprises (SMEs). IOP Conference Series: Materials Science and Engineering, 114 (1). ISSN 17578981
Mohamed Azmie, bin Apandi (2014) Reka bentuk shin pad untuk futsal. [Final Year Project Report] (Unpublished)
Mohammad Bakhtiar, B. Johari (2006) Feasibility study on implementing modular production system. [Final Year Project Report] (Unpublished)
Mohammad Hafiz, b. Hj. Amran (2006) Inventory control practices. [Final Year Project Report] (Unpublished)
Mohammad Zabri, Johari. (2003) Factors affecting comfort level and performance : a comparison between four different types of computer mouse. [Final Year Project Report] (Unpublished)
Mohd Azrin, Mohd Said and Ahmad Faridzul, Japar and Nor Kamaliana, Khamis and Abdullah, Yassin and Ana Sakura, Zainal Abidin and Rudiyanto, Philman Jong and Mohamad Syazwan Zafwan, Suffian and Aishah, Arsad (2020) DESIGN AND DEVELOP LOW-COST DEVICE FOR MONITORING OCCUPATIONAL NOISE EXPOSURE TOWARD WORKERS IN FACTORY. Science International (Lahore), 32 (6). pp. 729-733. ISSN 1013-5316
Mohd Azrin, Mohd Said and Brian Egan, Jackson Tubam and Nor Kamaliana, Khamis and Aishah, Arsad (2020) A Study of Postural Safety and Low-Cost Electromyography (EMG) Device Towards Grocery Workers in Kota Samarahan, Sarawak. Journal of Engineering and Science Research, 4 (4). pp. 1-5. ISSN 2289-7127
Mohd Azrin, Mohd Said and Mohd Hasanal, Sufri Umar and Nor Kamaliana, Khamis and Aishah, Arsad (2020) A PRELIMINARY STUDY OF POSTURAL SAFETY AND LOW-COST ELECTROMYOGRAPHY (EMG) TOWARDS LOGISTIC WORKERS IN KUCHING SENTRAL. Sci.Int.(Lahore), 32 (6). pp. 661-665. ISSN 1013-5316
Mohd Azrin, Mohd Said and Shawn Felix, Stephen and Nor Kamaliana, Khamis and Abdullah, Yassin and Ana Sakura, Zainal Abidin and Rudiyanto, Philman Jong and Mohamad Syazwan Zafwan, Suffian and Aishah, Arsad (2020) Design and Develop Low-Cost Device on Monitoring Environmental Indoor Air Quality in Factory. Journal of Engineering and Science Research, 4 (4). pp. 6-11. ISSN 2289-7127
Mohd Azrin, Mohd Said and Zinnirah, Wellun and Nor Kamaliana, Khamis (2022) Effects of Noise Hazards towards Physiology Especially Heart Rate Performance among Worker in Manufacturing Industry and Their Prevention Strategies: A Systematic Review. Iranian Journal of Public Health, 51 (8). pp. 1706-1717. ISSN 2251-6085
Mohd Danial, Bin Ibrahim and Ger, Lian Tan and Lidyana, Binti Roslan and Kashiwabara, Yuki and Jasmine, Jendia and Sunami, Yuta (2019) Numerical and Experimental Analysis on Runner and Gate Positioning for Magnesium Alloy Die-Casted Test Piece. In: 7th Asia Conference on Mechanical and Materials Engineering (ACMME 2019),, 14-17th June 2019, Tokyo, Japan.
Mohd Danial, Ibrahim and Ger, Lian Tan and Lidyana, Roslan and Kashiwabara, Yuki and Jasmine, Jendia and Sunami, Yuta (2019) Numerical and Experimental Analysis on Runner and Gate Positioning for Magnesium Alloy Die-casted Test Piece. Materials Science Forum, 975. pp. 1-6. ISSN 1662-9752
Mohd Hafiz, Mohammad Saleh (2007) Research on conceptual design and features of multimedia payphone (MmP) in Malaysia. [Final Year Project Report] (Unpublished)
Mohd Jalani, M.F (2008) Application of oil palm empty fruit bunch composite as an eco-efficient product. [Final Year Project Report] (Unpublished)
Mohd Nooriman, Bin Awang Besar. (2006) Kajian kesesuaian reka bentuk ''Stretcher'' atau pengusung untuk kegunaan anggota penyelamat dalam waktu kecemasan. [Final Year Project Report] (Unpublished)
Mohd Nur Syaikhul Al-Hafiz, bin Hj. Salleh (2009) Perabot taman dwi fungsi. [Final Year Project Report] (Unpublished)
Mohd Nurfirdaus, Mohiddin and Abu, Saleh Ahmed and Reddy, Amarnadh N.R. and Sinin, Hamdan (2020) Turritella terebra Shell Synthesized Calcium Oxide Catalyst for Biodiesel Production from Chicken Fat. Materials Science Forum, 997. pp. 93-101. ISSN 1662-9752
Mohd Shahidan, Yahya (2006) Pengkajian terhadap reka bentuk khemah untuk kegunaan semasa bencana alam dan darurat. [Final Year Project Report] (Unpublished)
Mohd Shaiful, Sajab and Wan Nazihah Liyana, Wan Jusoh and Denesh, Mohan and Hatika, Kaco and Rubiyah, Baini (2023) 3D Printed Functionalized Nanocellulose as an Adsorbent in Batch and Fixed-Bed Systems. Polymers, 15 (969). pp. 1-12.
Muhammad Amin, Bin Ibahrim (2017) Penilaian Manual Menembak bagi Posisi dan Teknik Menembak dalam kalangan Pelatih PDRM. Masters thesis, Universiti Malaysia Sarawak (UNIMAS).
Muhammad Qasim, Khan and Musse Mohamud, Ahmed and Ahmed Mohamed, Ahmed Haidar (2022) An accurate algorithm of PMU-based wide area measurements for fault detection using positive-sequence voltage and unwrapped dynamic angles. Measurement, 192 (110906). pp. 1-19. ISSN 0263-2241
Mustafa Kamal, M. and Rubiyah, Baini and Shahrol, Mohamaddan and Henry Ragai, A.R. and Soh Fong, L. and Abdul Rahman, N. and Mili, N. and Siti Noor Linda, Taib and Othman, A.K. and Mohammad Omar, Abdullah (2016) Comparisons of the physicochemical and functional properties of commercially and traditionally processed sago starch. MATEC Web of Conferences, 87. ISSN 2261236X
NUR ADIBA, MOHD SAIFUL AZLAN (2023) Occupational Safety and Health Administration Compliancy Application. [Final Year Project Report] (Unpublished)
Nawi, M.N.M and Songappenm, M. and Nadarajan, Shanthi and Siti Halipah, Ibrahim and Mustapha, R. (2017) Procurement performance and supplier management measurement issues: A case of Malaysian private company. International Journal of Supply Chain Management, 6 (1). pp. 246-253. ISSN 2051-3771
Nazliza, binti Zakaria (2007) Kajian identiti korporat Restoran Kuih Melayu Tradisional Onde-Onde. [Final Year Project Report] (Unpublished)
Nazril bin, Mohd Najib (2004) Application of axiomatic design to the toaster design - a case study. [Final Year Project Report] (Unpublished)
New Sarawak, Tribune (2012) Alternative materials for timber industry. [Newspaper Cutting] (In Press)
New Sarawak Tribune (2019) Food safety - no laughing matter. [Newspaper Cutting] (In Press)
Noor Zaniza Wati, Zainol (2005) Thermal properties of tile and marble. [Final Year Project Report] (Unpublished)
Noorasikin, bt. Asri (2006) Kajian pembungkusan baja tumbuhan hiasan. [Final Year Project Report] (Unpublished)
Nor Azura, bt Abdul Aziz (2006) Kajian teknik ilustrasi rekabentuk pembungkusan produk madu lebah. [Final Year Project Report] (Unpublished)
Nor Fatin, binti Pauzi (2012) Eksperimentasi reka bentuk pembungkusan coklat nisse. [Final Year Project Report] (Unpublished)
Nor Hartini, binti Hanapi (2015) Pembuatan seni kaligrafi khat di Jabatan Agama Islam Sarawak (JAIS). [Final Year Project Report] (Unpublished)
Norsuzailina, Mohamed Sutan (2017) Innovative Solutions for Engineering and Technology Challenges. UNIMAS Publisher, Universiti Malaysia Sarawak. ISBN ISBN 978-967-2008-36-1
Nurakmal, Abdullah@ Goh Tuo Ho and Abd-Razak, M. Z. and Che-Ani, A. I. and Mustafa, N.K.F. (2011) Campus Sustainability : Student’s Perception on Campus Physical Development Planning in Malaysia. Procedia Engineering, 20. pp. 230-237. ISSN 1877-7058
Nurakmal, Abdullah@ Goh Tuo Ho and Mazlan, Mohd Tahir and Chohan, Afaq Hyder and Che-Ani, A. I. and Norngainy, Mohd Tawil and Syahrul Nizam, Kamaruzzaman (2011) Housing and analysis of design defects : A post occupational evaluation of private housing in Malaysia. International Journal of the Physical Sciences, 6 (2). pp. 193-203. ISSN 1992 - 1950
Nurakmal, Abdullah@ Goh Tuo Ho and Mazlan, Mohd Tahir and Norngainy, Mohd Tawil and Beh, S. C. and Che-Ani, A. I. (2011) Architecture design studio culture and learning spaces : a holistic approach to the design and planning of learning facilities. Procedia Social and Behavioral Sciences, 15. pp. 27-32. ISSN 1877–0428
Nurakmal, Abdullah@ Goh Tuo Ho and Mohd Zulhanif, Abd Razak and Muhammad Farihan Irfan, Mohd Nor and Ismar, M.S. Usman and Adi Irfan, Che-Ani (2011) Toward a Sustainable Campus: Comparison of the Physical Development Planning of Research University Campuses in Malaysia. Journal of Sustainable Development, 4 (4). pp. 210-221. ISSN 1913-9071
Nurakmal, Abdullah@ Goh Tuo Ho and Norngainy, Mohd Tawil and Azalillah Ramdani, Musa and Utaberta, Nangkula and Nasir, A. R. M. and Musa, A. R. (2011) Identification of Indoor Environmental Quality (IEQ) Parameter in Creating Conducive Learning Environment for Architecture Studio. Procedia Engineering, 20. pp. 354-362. ISSN 1877-7058
Nurakmal, Abdullah@ Goh Tuo Ho and Norngainy, Mohd Tawil and Che-Ani, A. I. and Ramly, A. and Daud, M. N. (2011) Service charge issue in Malaysian high-rise residential management : An analysis using a fuzzy conjoint model. International Journal of the Physical Sciences, 6 (3). pp. 441-447. ISSN 1992 - 1950
Nurdan Demirci, Sankir and Mehmet Sankir, Varun Vohra and Nur Tahirah, Razali and Murata, Hideyuki (2017) Interface Engineering: A Key Aspect for the Potential Commercialization of Printable Organic Photovoltaic Cells. In: Printable Solar Cells. Scrivener Publishing LLC. ISBN Print ISBN: 9781119283713
Nurul Fastifa, Ab Sani (2020) Analysis Of Factors Affecting The Food Packages Manufacturing System Using Simulation-Based Modelling. [Final Year Project Report] (Unpublished)
Omar Qaiyum, Bin Sulaiman (2008) Analysis of wood waste composite. [Final Year Project Report] (Unpublished)
Reddy, Anr and Saleh, A.A. and Islam, M.S. and Sinin, Hamdan (2017) Active Razor Shell CaO Catalyst Synthesis for Jatropha Methyl Ester Production via Optimized Two-Step Transesterification. Journal of Chemistry, 2017. ISSN 20909063
Rimes, C.R (2009) Implementation of group technology in local manufacturing industry. [Final Year Project Report] (Unpublished)
Rossazana, Ab. Rahim and Rosita, Hamdan (2006) A Study On Competitiveness of Sarawak Manufacturing Industries. [Working Paper] (Unpublished)
Sani, M. Najib and Yusoff, B. Saiful (2016) The Form, Senses and Dynamics: A Literature Review on the Philosophical and Technical Coherency for the Development of the Floor-Sitting Furniture Design. In: Advances in Ergonomics in Design. Advances in Intelligent Systems and Computing, 485 . Springer International Publishing, pp. 373-378. ISBN 978-3-319-41983-1
Sara, Ahmed and Zahraa, Al-Dawood and Farid, Abed and Mohammad Abdul, Mannan and Mufid, Al-Samarai (2021) Impact of using different materials, curing regimes, and mixing procedures on compressive strength of reactive powder concrete - A review. Journal of Building Engineering, 44 (2021). pp. 1-17.
Saravana, Kannan Thangavelu and Abu Saleh, Ahmed and Ani, F.N. (2013) Energy Efficient Microwave Irradiation of Sago Bark Waste (SBW) for Bioethanol Production. Advanced Materials Research, 701. pp. 249-253. ISSN 1662-8985
Selvam, R. (2010) Fabrication and testing of bagasse particle reinforced biocomposite. [Final Year Project Report] (Unpublished)
Shahidul, Islam and Michael, A. B. and Rubiyah, Baini and Shirley, Jonathan Tanjong and Ahmad, A. F. and Hishammudin Afifi, Huspi (2023) CLEAN WATER PRODUCTION PERFORMANCE MEASUREMENT INDICATORS AND FACTORS: A REVIEW ON ULTRAFILTER MEMBRANE. SCIENCE INTERNATIONAL (LAHORE), 35 (3). pp. 209-218. ISSN 1013-5316
Shahidul, Islam and Syed Shazali, Syed Tarmiz (2011) Determinants of manufacturing productivity: Pilot study on labor-intensive industries. International Journal of Productivity and Performance Management, 60 (6). pp. 567-582. ISSN 1741-0401
Shahidul, Islam and Syed Shazali, Syed Tarmiz (2011) Dynamics of manufacturing productivity: lesson learnt from labor intensive industries. Journal of Manufacturing Technology Management, 22 (5). pp. 664-678. ISSN 1741-038X
Shahrol, Mohamaddan and Lew, Hao Xian and Mohd Fadzli, Ashari and Marini, Sawawi and Mohamad Syazwan Zafwan, Bin Mohamad Suffian (2019) Conceptual Design of a Sago Drying Machine and Structural Simulation Using Finite Element Analysis. Journal of Sustainability Science and Management, 14 (4). pp. 86-93. ISSN 2672-7226
Shahrulnizamakmar, Bin Din (2006) Comparative performance of solar dryers for drying fruits. [Final Year Project Report] (Unpublished)
Sharifah Azrin-Azalea, Binti Wan Zawawie (2011) The determinants of intra industry trade in manufacturing industry between Malaysia and its trading partners ; Hong Kong, Japan, Korea, Singapore and United States. [Final Year Project Report] (Unpublished)
Sharina, Segri (2013) Study on human working behaviour in automated and manual manufacturing system. [Final Year Project Report] (Unpublished)
Sherena, Saree and Shanti Faridah, Salleh and Mohd Azlan, Ismail (2015) An Investigation of Stickiness Force of Palm Oil Fruit for Food Processing. Journal of Applied Science & Process Engineering, 2 (2). pp. 74-82. ISSN 2289-7771
Shirley, J. Tanjong and Nur Tahirah, Razali and Magdalene, Andrew Munot and Rudiyanto, Philman Jong and Ervina, Junaidi and Annisa, Jamali (2020) ANALYSES ON PROGRAMME OUTCOMES MEASUREMENTS FOR CONTINUOUS QUALITY IMPROVEMENT OF AN UNDERGRADUATE ENGINEERING PROGRAMME. Journal of Southwest Jiaotong University, 55 (6). pp. 1-14. ISSN 0258-2724
Sinin, Hamdan and Mohammad Nurul, Hoque and Norsuzailina, Mohamed Sutan (2015) Minor Construction Measures That Influences Vibration In Concrete Floors From Single And Dual Frequency Components. International Journal of Structural Engineering, 4 (3). pp. 147-168. ISSN 1758-7336
Siti Norhalmizawati, Daud (2005) Kajian rekabentuk pembungkusan produk belacan. [Final Year Project Report] (Unpublished)
Siti Yusni bt, Azmi (2007) Kajian reka bentuk troli di lapangan terbang antarabangsa Kuching. [Final Year Project Report] (Unpublished)
Soovirehn, a/l Epeng (2014) Reka bentuk kasut sepak takraw. [Final Year Project Report] (Unpublished)
Steven, Anak Tumi (2003) Failure analysis of a pressure control system. [Final Year Project Report] (Unpublished)
Tajul, Ariffin Masron and Mohd Khairul, Hisyam Hassan (2016) US Foreign Direct Investment (Fdi) And Manufacturing Sector In Malaysia. Asian Academy of Management Journal, 21 (1). pp. 89-110. ISSN 2180-4192
Tan, Chuan Ser (2020) Prediction Of Proximal Femur Loads Using Finite Element Analysis And Artifical Neural Network. [Final Year Project Report] (Unpublished)
Tan, M. Y. and Kuan, H. T N and Khan, A. A. (2017) Tensile properties of ground coffee waste reinforced polyethylene composite. Materials Science Forum, 880. pp. 73-76. ISSN 02555476
Tang, Weng Chin. (2003) Development and implementation of fuzzy artmap neural network model in the pattern classification of product design preferences : a case study for eyeglasses frame design. [Final Year Project Report] (Unpublished)
Tay, C.C. and Hamdan, S. and Osman, M.S.B. (2016) Properties of Sago Particleboards Resinated with UF and PF Resin. Advances in Materials Science and Engineering, 2016. ISSN 1687-8434
Tay, Kai Meng (2009) On fuzzy inference system based failure mode and effect analysis (FMEA) methodology. In: International Conference on Soft Computing and Pattern Recognition, 4 December 2009 through 7 December 2009, Malacca; Malaysia.
Thangavelu, S.K. and Abu Saleh, Ahmed and Ani, F.N. (2014) Bioethanol production from sago pith waste using microwave hydrothermal hydrolysis accelerated by carbon dioxide. Applied Energy. ISSN 0306-2619
The Borneo, Post (2012) Establishement of furniture testing lab timely, 15 Februari 2012. [Newspaper Cutting] (In Press)
The Star (2016) Govt to boost downstream timber industry. [Newspaper Cutting] (In Press)
The Star (2012) Get green certification, nation's manufacturers urged. [Newspaper Cutting] (In Press)
The Star (2012) State's first furniture test laboratory in Kota Samarahan soon. [Newspaper Cutting] (In Press)
Tie, Soon Hieng (2008) Modification and fabrication of a hybrid solar peltier-adsorption cooler. [Final Year Project Report] (Unpublished)
Tiong, Collin Inn Seng. (2010) Durability properties of concrete with oil palm shell (OPS) aggregates. [Final Year Project Report] (Unpublished)
Utusan Sarawak (1997) Pelajar UNIMAS cipta reka bentuk perodua kancil dan rusa. [Newspaper Cutting] (In Press)
Verawaty, Binti Hj. Ismail (2005) Creep behaviour of oil palm empty fruit bunch (EFB) fibre - polyester composite. [Final Year Project Report] (Unpublished)
Wan Adibah, Wan Mahari and Cheng, Tung Chong and Wei, Haur Lam and Tuan Nurul Sabiqah, Tuan Anuar and Nyuk, Ling Ma and Mohd Danial, Ibrahim and Su, Shiung Lam (2018) Microwave co-pyrolysis of waste polyolefins and waste cooking oil: Influence of N2 atmosphere versus vacuum environment. Energy Conversion and Management, 171. pp. 1292-1301. ISSN 0196-8904
Wei, Kuo-Hau (2003) Packaging strategy in competitive pharmaceutical markets : convention or dose-customized blister packs? Masters thesis, Universiti Malaysia Sarawak (UNIMAS).
Wilson, Robert Sabang (2012) Rekabentuk pembawa komputer riba. [Final Year Project Report] (Unpublished)
Winsell, Anak Juim (2004) Resource optimisation and waste reduction. [Final Year Project Report] (Unpublished)
Wong, Hueynee and Chin, Muiyin and Teo, Cia Ling and Puah, Chin Hong (2015) Determinants of Malaysia’s bilateraltrade in the manufacturing sector: A comparison between China and Asean. Journal of International Business and Economics, 15 (3). pp. 29-34. ISSN 15448037
Wong, S.J.U (2005) Study of humidity in box type solar cooker. [Final Year Project Report] (Unpublished)
YARUI, HUO (2023) The New Conceptual Model for the Net Benefits Improvement in the Intelligent Hanging Production System for Jeans in China. PhD thesis, Universiti Malaysia Sarawak (UNIMAS).
Yap, Shui Wee (2015) Packaging design for maltose. [Final Year Project Report] (Unpublished)
Yarui, Huo and Faridah, Sahari (2023) Exploring the Common Failures and Routine Maintenance of Jeans Overlocking Machine. Journal of Management and Strategy, 14 (1). pp. 1-12. ISSN 1923-3965
Yek, P.N.Y (2005) Theory of constraints (TOC) practices of a semiconductor company. [Final Year Project Report] (Unpublished)
Yusman, Yacob and Jati Kasuma, Ali and Hiram, Ting (2016) Value Co-Creation Dimensions: Their Effect On Satisfaction Of Cooperative Members. Malaysian Journal of Co-Opertative Studies, 12. ISSN 1823-5387
Zahrul Zamri, Jamaluddin (2024) Reka Bentuk Turbin Piko Hidrokinetik Dan Kesesuaiannya Kepada Lokaliti Pedalaman Sarawak. PhD thesis, Universiti Malaysia Sarawak.
Zulfika, Ismail (2005) Vibration analysis on joint. [Final Year Project Report] (Unpublished)
Zulkurnain bin, Salim (2004) Designing a pineapple machine. [Final Year Project Report] (Unpublished)
