Mohamed Sutan, Norsuzailina and N.I.A., Ideris and S.N. L., Taib and D.T.C., Lee and A., Hassan and S.K., Sahari and K.A., Mohamad Said and H. R., Sobuz (2017) Microstructural characterization of catalysis product of nano cement based materials. E3S Web of Conferences. ISSN https://www.e3s-conferences.org/ (In Press)
|
PDF
CENVIRON_2017_paper_168 INPRESS (abstrak).pdf Download (321kB) | Preview |
Official URL: https://www.e3s-conferences.org/
Abstract
Cement as an essential element for cement-based products contributed to negative environmental issues due to its high energy consumption and carbon dioxide emission during its production. These issues create the need to find alternative materials as partial cement replacement where studies on the potential of utilizing silica based materials as partial cement replacement come into picture. This review highlights the effectiveness of microstructural characterization techniques that have been used in the studies that focus on characterization of calcium hydroxide (CH) and calcium silicate hydrate (C-S-H) formation during hydration process of cement-based product incorporating nano reactive silica based materials as partial cement replacement. Understanding the effect of these materials as cement replacement in cement based product focusing on the microstructural development will lead to a higher confidence in the use of industrial waste as a new non-conventional material in construction industry that can catalyse rapid and innovative advances in green technology.
| Item Type: | Article |
|---|---|
| Additional Information: | References [1] M. S. Norsuzailina, I. Yakub, and H. Jau, “Physical and Mechanical Properties of Industrial Waste Modified Mortar,” Applied Mechanics and Materials, vol. 695, pp. 643–646, Nov. (2014) [2] Y. Huang, X. Chen, Y. Deng, D. Zhou, and L. Wang, “A Novel Nickel Catalyst Derived From Layered Double Hydroxides ( LDHs ) Supported on Fluid Catalytic Cracking Catalyst Residue ( FC3R ) for Rosin Hydrogenation,” Chemical Engineering Journal, vol. 269, pp. 434–443, (2015) [3] S. V. Payá, Jordi, Jose M. Monzo, Maria V. Borrachero, “Pozzolanic Reaction Rate of Fluid Catalytic Cracking Catalyst Residue ( FC3R ) in Cement Pastes,” Advances in Cement Research, vol. 25, pp. 1–7, (2013) [4] B. Pacewska, M. Nowacka, I. Wilińska, W. Kubissa, and V. Antonovich, “Studies on the Influence of Spent FCC Catalyst on Hydration of Calcium Aluminate Cements at Ambient Temperature,” Journal of Thermal Analysis and Calorimetry, vol. 105, no. 1, pp. 129–140, Mar. (2011) [5] K. Alshamsi, M. Baawain, K. Aljabri, R. Taha, and Z. Al-kamyani, “Utilizing Waste Spent Catalyst in Asphalt Mixtures,” Procedia - Social and Behavioral Sciences, vol. 53, pp. 326–334, Oct. (2012) 6 [6] E. D. Rodríguez, S. a. Bernal, J. L. Provis, J. D. Gehman, J. M. Monzó, J. Payá, and M. V. Borrachero, “Geopolymers Based on Spent Catalyst Residue From a Fluid Catalytic Cracking (FCC) Process,” Fuel, vol. 109, pp. 493–502, Jul. (2013) [7] S. A. E. Mohamed and A. E. Ragab, “Physico-Mechanical Properties and Microstructure of Blended Cement Incorporating Nano-Silica,” International Journal of Engineering Research & Technology (IJERT), vol. 3, no. 7, pp. 339–358, (2014) [8] H. Biricik and N. Sarier, “Comparative Study of the Characteristics of Nano Silica, Silica Fume and Fly Ash - Incorporated Cement Mortars,” Materials Research, vol. 17(3), pp. 570–582, (2014) [9] P. Hou, S. Kawashima, D. Kong, D. J. Corr, J. Qian, and S. P. Shah, “Modification Effects of Colloidal NanoSiO2 on Cement Hydration and Its Gel Property,” Composites Part B: Engineering, vol. 45, no. 1, pp. 440– 448, Feb. (2013) [10] A. Lazaro Garcia, G. Quercia, H. J. H. Brouwers, and J. W. Geus, “Synthesis of a Green Nano-Silica Material Using Beneficiated Waste Dunites and Its Application in Concrete,” World Journal of Nano Science and Engineering, vol. 2013, no. 3, pp. 41–51, (2013) [11] E. Horszczaruk, E. Mijowska, K. Cendrowski, S. Mijowska, and P. Sikora, “Effect of Incorporation Route on Dispersion of Mesoporous Silica Nanospheres in Cement Mortar,” Construction and Building Materials, vol. 66, pp. 418–421, Sep. (2014) [12] H. Gurdián, E. García-Alcocel, F. Baeza-Brotons, P. Garcés, and E. Zornoza, “Corrosion Behavior of Steel Reinforcement in Concrete with Recycled Aggregates, Fly Ash and Spent Cracking Catalyst,” Materials, vol. 7, no. 4, pp. 3176–3197, (2014) [13] C. Costa, M. S. Ribeiro, and N. Brito, “Effect of Waste Oil-Cracking Catalyst Incorporation on Durability of Mortars,” Materials Sciences and Applications, vol. 5, no. November, pp. 905–914, (2014) [14] T. Castellanos, T. Agredo, and M. De Gutiérrez, “Performance Under Sulfate Attack of Concrete Additioned with Fluid Catalytic Cracking Catalyst Residue ( FCC ) and Metakaolin ( MK ),” Ingeniería E Investigacion, vol. 33 No.1, no. April, pp. 18–22, (2013) [15] S. Velázquez, J. Monzó, M. Borrachero, and J. Payá, “Assessment of the Pozzolanic Activity of a Spent Catalyst by Conductivity Measurement of Aqueous Suspensions with Calcium Hydroxide,” Materials, vol. 7, no. 4, pp. 2561–2576, Mar. (2014) [16] M. S. Amin, S. M. a. El-Gamal, S. a. Abo-El-Enein, F. I. El-Hosiny, and M. Ramadan, “Physico-Chemical Characteristics of Blended Cement Pastes Containing Electric Arc Furnace Slag With and Without Silica Fume,” in HBRC Journal, pp. 1687–4048, (2014) [17] V. K. Vadivel Rajendiran, Stalin., “Performance Assessment of Cement Grout by Incorporating Nanomaterials,” in Advanced Nanomaterials and Emerging Technologies (ICANMEET-2013), pp. 706–712, (2013) [18] L. Soriano, J. Monzó, M. Bonilla, M. M. Tashima, J. Payá, and M. V. Borrachero, “Effect of Pozzolans on the Hydration Process of Portland Cement Cured at Low Temperatures,” Cement and Concrete Composites, vol. 42, pp. 41–48, Sep. (2013) [19] R. Taha, Z. Al-kamyani, K. Al-jabri, M. Baawain, and K. Al-shamsi, “Recycling of Waste Spent Catalyst in Road Construction and Masonry Blocks,” Journal of Hazardous Materials, vol. 229–230, pp. 122–127, (2012) 7 [20] Y. Morozov, a. S. Castela, a. P. S. Dias, and M. F. Montemor, “Chloride-Induced Corrosion Behavior of Reinforcing Steel In Spent Fluid Cracking Catalyst Modified Mortars,” Cement and Concrete Research, vol. 47, pp. 1–7, (2013) [21] M. Aleknevic, V. Antonovic, and I. Pundien, “Investigating the Hydration of Deflocculated Calcium Aluminate Cement-Based Binder With Catalyst Waste,” J Therm Anal Calorim, vol. 109, pp. 537–544, (2012) [22] B. Pacewska, M. Nowacka, M. Aleknevičius, and V. Antonovič, “Early Hydration of Calcium Aluminate Cement Blended with Spent FCC Catalyst at Two Temperatures,” Procedia Engineering, vol. 57, pp. 844– 850, (2013) [23] K. Al-Jabri and H. Shoukry, “Use of Nano-Structured Waste Materials for Improving Mechanical, Physical and Structural Properties of Cement Mortar,” Construction and Building Materials, vol. 73, pp. 636–644, Dec. (2014) [24] U. S. and S. A. L. P. Singh, S. K. Agarwal, S. K. Bhattacharyya, “Preparation of Silica Nanoparticles and Its Beneficial Role in Cementitious Materials,” Nanomater. nanotechnol, vol. 1, no. 1, pp. 44– 51, (2011) [25] K. S. S., Maheswaran, Bhuvaneshwari B, Palani G.S, Nagesh R Iyer, “An Overview on the Influence of Nano Silica in Concrete and a Research Initiative,” Research Journal of Recent Sciences, vol. 2, pp. 17–24, (2013) [26] G. L. and D. Stephan, “The Influence of Nano-Silica on the Hydration of Ordinary Portland Cement,” J Mater Sci, vol. 47, pp. 1011–1017, (2012) [27] N. M. Sutan, I. Yakub, and S. Hamdan, “Characterization of Calcium Hydroxide ( CH ) Crystals in Nano Modified Binder ( NMB ),” Concrete Research Letters, vol. 5, no. June, pp. 760–767, (2014) [28] M. Stefanidou and I. Papayianni, “Influence of Nano-SiO2 on the Portland Cement Pastes,” Composites Part B: Engineering, vol. 43, no. 6, pp. 2706– 2710, Sep. (2012) [29] S. R. and R. F. Sharma Parveen, “A Review on Nanomaterial Dispersion , Microstructure , and Mechanical Properties of Carbon Nanotube and Nanofiber Reinforced Cementitious Composites,” Journal of Nanomaterials, pp. 1–19, (2013) [30] A. B. and P. Hosseini, “Effect of Nano-SiO2 Particles on Properties of Cement Mortar Applicable for Ferrocement Elements,” Concrete Research Letters, vol. 2(1), no. March 2011, pp. 167–180, (2011) [31] I. S. K. Sayed Abd El-Baky, Sameh Yehia, “Influence of Nano-Silica Addition on Properties of Fresh and Hardened Cement Mortar,” in Nanocon 2013, pp. 0–5, (2013) [32] A. C. Kae-Long Lin, Chao-Lung Hwang, Je-Lueng Shie, “Hydration Characteristics of Waste Catalysts Used as Pozzolanic Materials,” AIChE - Environmental Progress & Sustainable Energy Journal, pp. 1–7, (2013). [33] M. Heikal, S. Abd El Aleem, and W. M. Morsi, “Characteristics of Blended Cements Containing Nano-Silica,” HBRC Journal, vol. 9, no. 3, pp. 243–255, Dec. (2013) [34] N. M. Sutan, I. Yakub, M. S. Jaafar, K. A. Matori, and S. K. Sahari, “Sustainable Nanopozzolan Modified Cement : Characterizations and Morphology of Calcium Silicate Hydrate during Hydration,” Journal of Nanomaterials, pp. 1–7, (2015) [35] N.M. Sutan, S. Hamdan, H.R. Sobuz, V.Laja & M.S. Islam (2012). Porosity and strength of pozzolan modified cement systems. Concrete Research Letters, 2(4),326-335 |
| Uncontrolled Keywords: | cements, nano cements, Microstructural, unimas, university, universiti, Borneo, Malaysia, Sarawak, Kuching, Samarahan, ipta, education, research, Universiti Malaysia Sarawak |
| Subjects: | T Technology > TA Engineering (General). Civil engineering (General) T Technology > TH Building construction |
| Divisions: | Academic Faculties, Institutes and Centres > Faculty of Engineering Faculties, Institutes, Centres > Faculty of Engineering |
| Depositing User: | Mohamed Sutan |
| Date Deposited: | 05 Jan 2018 08:06 |
| Last Modified: | 31 Jul 2019 01:03 |
| URI: | http://ir.unimas.my/id/eprint/19244 |
Actions (For repository members only: login required)
 |
View Item |
