Study Of Cutting Edge Temperature And Cutting Force Of End Mill Tool In High Speed Machining

Mohammad Ashaari, Kiprawi and Abdullah, Yassin and Syed Tarmizi, Syed Shazali and Shahidul, Islam and Mohd Azrin, Mohd Said (2017) Study Of Cutting Edge Temperature And Cutting Force Of End Mill Tool In High Speed Machining. MATEC Web of Conferences, 87. ISSN 2261236X

[img]
Preview
PDF
Study Of Cutting Edge Temperature And Cutting Force Of End Mill Tool (abstract).pdf

Download (54kB) | Preview

Abstract

A wear of cutting tools during machining process is unavoidable due to the presence of frictional forces during removing process of unwanted material of workpiece. It is unavoidable but can be controlled at slower rate if the cutting speed is fixed at certain point in order to achieve optimum cutting conditions. The wear of cutting tools is closely related with the thermal deformations that occurred between the frictional contact point of cutting edge of cutting tool and workpiece. This research paper is focused on determinations of relationship among cutting temperature, cutting speed, cutting forces and radial depth of cutting parameters. The cutting temperature is determined by using the Indium Arsenide (InAs) and Indium Antimonide (InSb) photocells to measure infrared radiation that are emitted from cutting tools and cutting forces is determined by using dynamometer. The high speed machining process is done by end milling the outer surface of carbon steel. The signal from the photocell is digitally visualized in the digital oscilloscope. Based on the results, the cutting temperature increased as the radial depth and cutting speed increased. The cutting forces increased when radial depth increased but decreased when cutting speed is increased. The setup for calibration and discussion of the experiment will be explained in this paper.

Item Type: Article
Uncontrolled Keywords: Cutting Edge Temperature, Cutting Force of End Mill Tool, machining process, research, Universiti Malaysia Sarawak, unimas, university, universiti, Borneo, Malaysia, Sarawak, Kuching, Samarahan, ipta, education
Subjects: T Technology > TJ Mechanical engineering and machinery
Divisions: Academic Faculties, Institutes and Centres > Faculty of Engineering
Depositing User: Karen Kornalius
Date Deposited: 15 Aug 2017 05:06
Last Modified: 15 Aug 2017 05:06
URI: http://ir.unimas.my/id/eprint/17237

Actions (For repository members only: login required)

View Item View Item